Quality control analyst jobs in Virginia Beach, VA

The City of Virginia Beach Department of Public Works Biology Internship Program is designed to recruit diverse college students majoring in Entomology; Biology; Animal Science; Environmental Health; Environmental Science. The program provides viable work experiences during the summer that assist students in making connections between textbook knowledge and real-world experiences. Eligibility: Must be a currently enrolled student (in an associate's, bachelor's, master's degree or PhD program) and be in good academic standing as determined by the school, college, or university. Duties: Summer Workers will work directly with the mosquito control biologist and her assistant to survey adult mosquito populations and perform mosquito-borne disease surveillance. Duties include, but are not limited to set-up, collections, and maintenance of various types of mosquito traps, mosquito speciation and preparation of specimens for arboviral isolation, collection and identification of mosquito eggs & larvae, collection of blood samples from sentinel chicken flocks, care and maintenance of the sentinel flocks and other related tasks. * Training on mosquito speciation, sentinel flock maintenance and specimen preparation will be provided on-the-job. Minimum Qualifications: Candidates must possess a valid Driver's license. Candidates must be currently seeking a degree in Entomology; Biology; Animal Science; Environmental Health; Environmental Science, or closely related field. Requirements: * Knowledge of basic laboratory techniques * Good fine-motor skills * Ability to work both in a team and independently with instruction from the biologist. * Ability to work outside during inclement weather conditions. * Ability to stoop, lift and carry at least 50 lbs. and traverse uneven terrain on foot. * Ability to work with sentinel chickens (training in handling and sampling skills will be provided) * Ability to stay on task for extended periods of time. * Possession of a valid driver's license and a good driving record. * Attendance at an employer sponsored defensive driving course after acceptance but before first day of work. Schedule and Hours: The Internship will run from approximately May 1, 2026 - Oct. 8, 2026. The candidates will work Mon. - Thurs. with 20-25 hours per week on average Daily schedules vary. We will try to accommodate Fall 2026 academic schedules but ask that our interns commit for the entire mosquito season (through Oct. 8, 2026). The applicant is responsible for providing their own transportation to work and housing during the summer internship. Application Attachments: Please include a resume, cover letter and transcripts (unofficial will be accepted). Incomplete applications will not be considered for the internship program. Interviews will be scheduled for qualified applicants in early April 2026. References may be requested at time of interview.

Clearance: Top Secret Position Type: Full-Time AERMOR is seeking a Quality Control Specialist IV who will serve as a senior technical expert responsible for ensuring all products, systems, and processes. The selected candidate will apply advanced engineering principles and practical problem-solving skills to evaluate, test, and verify performance compliance of systems-particularly U.S. Navy Navigation equipment and systems. This is not a remote position. Key Responsibilities: Lead and execute quality control (QC) and assurance processes for engineering products, test specimens, and systems under development. Ensure that all products, services, and fabrication methods conform to applicable engineering, safety, and operational standards. Conduct hands-on testing, inspection, and validation of U.S. Navy Navigation systems and supporting components. Review and interpret engineering plans, blueprints, and technical drawings; provide feedback and recommendations to improve design quality. Collaborate with design and fabrication teams to develop and construct test specimens, models, and prototypes. Utilize Computer-Aided Drafting (CAD) tools to prepare shop drawings and documentation supporting system and model construction. Evaluate material specifications and fabrication methods to ensure compliance with project and safety requirements. Support system-level testing and evaluation, performance verification, and failure analysis activities. Contribute to continuous process improvement, identifying and mitigating quality risks across design and manufacturing stages. Provide technical guidance and mentorship to junior staff, reinforcing best practices in engineering quality control and safety assurance. Qualifications: 10 years of professional experience in engineering or technical fields focused on solving complex technical problems. Hands-on experience with U.S. Navy Navigation equipment and systems, including at least three of the following four areas: Systems requirements, operational requirements, test & evaluation, and training. Strong understanding of engineering principles, methods, and industry-standard testing techniques. Proven ability to ensure product, process, and service quality and safety compliance. Experience conducting performance testing and process validation for engineering or manufacturing operations. Proficiency in CAD software (e.g., AutoCAD, SolidWorks, or equivalent). Ability to interpret and apply engineering plans, blueprints, and material specifications. Demonstrated knowledge of fabrication techniques and construction of test specimens or models.

Job DescriptionLocation: Norfolk, VA Clearance: TS/SCI Position Type: Full-Time AERMOR is seeking a Quality Control Specialist III who will provide professional quality assurance and technical support. This role requires a strong background in engineering or software design/maintenance, quality control practices, and hands-on experience with U.S. Navy Navigation equipment and systems. The Specialist ensures that products, services, and processes meet established quality and safety standards, and plays a critical role in testing, evaluation, and verification efforts. This is not a remote position. Responsibilities: Apply engineering and software design/maintenance skills to solve technical problems. Ensure that products, services, and processes meet quality and safety standards. Perform equipment testing to verify process effectiveness, safety, and compliance. Interpret engineering plans and technical drawings, contributing to the design and fabrication of test specimens. Utilize Computer-Aided Drafting (CAD) tools to prepare shop drawings for model construction. Work with material specifications and fabrication methods to support testing and design processes. Required Experience: At least 5 years of professional experience solving technical problems in engineering and/or software design/maintenance. Practical understanding of engineering concepts. Hands-on testing of equipment to ensure safe and effective operation. Proficiency with CAD software for drafting and design. Familiarity with material specifications and fabrication methods. Hands-on experience with U.S. Navy Navigation equipment and systems. Expertise in at least three (3) of the following four (4) areas: Systems Requirements, Operational Requirements, Test & Evaluation, and Training. Powered by JazzHR EY8CjMblnQ

Job Description Join a high-profile federal construction project as a QC Specialist focusing on civil and structural scopes. Your expertise will ensure high-quality construction aligned with contract drawings and NAVFAC specifications. Responsibilities: Perform daily QC inspections on foundations, concrete, steel, decking, etc. Conduct and document all three phases of QC for civil/structural work. Review project plans and identify any discrepancies or non-conformance. Coordinate with testing labs and subcontractors. Qualifications: Graduate Civil or Structural Engineer preferred. 10 years of relevant experience in similar construction environments. Familiar with EM 385-1-1 and USACE/NAVFAC standards.

Leidos Civil Group is seeking a dynamic **Material Handler** **Intern** in Chesapeake, VA. The candidate will complete parts packaging in accordance with specialized packaging requirements. Fabrication of shipping labels, ensuring proper format and shipping address accuracy. Coordinate special shipping requirements as necessary. Document and maintain accurate shipping activity files. Provide daily shipping and billing summaries to program administration. Perform periodic inventory of shipping material to ensure adequate quantities on hand. Perform applicable data entry to the existing CDLS automated Logistics Database. Update shipping information to the FAA "Logistics Information System" (LIS) via WEB page. Perform preliminary package inspection for any apparent external damage and notify shipper at time of delivery if damage is detected. Verify and note received packages for shipment type (Purchase Order or Field parts returned for repair. For Purchase Order items, verify the Purchase Order document to the part actually received and then notify ordering individual of the received parts. Update and maintain the department receiving files. Maintain the warehouse physical organization and cleanliness. Support periodic warehouse inventory activities. Interface with management to resolve any problems or discrepancies that may arise with orders. Develop a level of expertise via cross training of coworker functions so as to fill in for position absences. **Primary Responsibilities.** + **Inventory Management** **:** Planning, controlling, and optimizing stock of goods to meet customer demand, minimize carrying costs, and maximize operational efficiency. + **Logistics Management** **:** Strategizing and coordinating the movement of goods and resources to meet customer demands and minimize costs. + **Logistics Systems** **:** Implementing and managing systems to optimize the flow of goods, information, and resources throughout the supply chain. + **Materials Management** **:** Controlling the acquisition, storage, and distribution of materials to support production and operations. + **Process Improvements:** Identifying opportunities for improvement and implementing changes to processes to address them. + **Warehousing Operations:** Overseeing the storage, handling, and distribution of goods within a warehouse facility to ensure efficiency and accuracy. **Basic Qualifications.** + Currently pursuing a bachelor's degree from an accredited university. + Previous Warehouse Experience. + Demonstrated Self-Starter, Operate Fork Lift, General Computer Skills FedEx On-Site Power Ship Exp., Microsoft Access + Experience, Knowledge of OSHA Standards, and Inventory Control & Management Specialized training in specific aspects of job functions and/or demonstrated ability to perform assigned tasks. + Ability to obtain and maintain a public trust clearance. **Preferred Qualifications.** + Proficiency with computer database systems + Proficiency in Microsoft Office products (Word, Excel, PowerPoint, Outlook) If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. **Original Posting:** October 16, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. **Pay Range:** Pay Range $41,600.00 - $75,200.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. **About Leidos** Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ************** . **Pay and Benefits** Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at **************/careers/pay-benefits . **Securing Your Data** Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ***************************** . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission (******************************* . **Commitment to Non-Discrimination** All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. REQNUMBER: R-00168672 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Quality Control Tech shall have a strong knowledge of all inspection procedures and utilization of required measuring devices that correspond to the tasking in which they are assigned. Perform shipboard/alteration inspections referencing MIL-STD's, NAVSEA Standard Items, and MIL-SPEC's. Provide detailed reports documenting all "As Found" conditions during inspection, including Quality Assurance Workbook. Verify proper documentation of all required repairs and communicate identified deficiencies to production to initiate corrective actions. Ensure that all test and inspection documentation is accounted for and thoroughly completed prior to certification. Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals to develop Test and Inspection QA Workbooks, incorporating V, I, and G level inspection points to Test and Inspection Plans (TIP). **Specific duties and responsibilities:** + Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook. + Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence. + Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures. + Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction. + Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience. + Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. + Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements. + Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations. + Candidates must be able to physically access all areas on board U.S. Naval Vessels to include tanks, voids, and working aloft in support of production operations. **Certification** + ISO Lead Auditor Training a plus + Certified Quality Inspector Certification + NAVSEA Connector Certification + NAVSEA Cableway Certification + NAVSEA Fiber Optic QA/Supervisor Training + Structural fit-up, welding, pipefitting, and NDT Level II experience/qualification is a plus. + Active OSHA 7615 Maritime Training 10hr Card + Shipyard Competent Person Responsibilities **Specific duties and responsibilities:** + Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook. + Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence. + Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures. + Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction. + Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience. + Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. + Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements. + Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations. + Candidates must be able to physically access all areas on board U.S. Naval Vessels to include tanks, voids, and working aloft in support of production operations. Qualifications **Other Required Skills** + Active secret security clearance desirable + Clearance: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ability to obtain a Secret clearance is required. + Candidate must be able/willing to travel in CONUS/OCONUS + ISO Lead Auditor Training a plus + Fiber Optic Connector QA/Build training + Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards. Must have or be able to obtain a passport **Abilities** + Exposure to computer screens for an extended period of time. + Sitting for extended periods of time. + Reach by extending hands or arms in any direction. + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. + Listen to and understand information and ideas presented through spoken words and sentences. + Communicate information and ideas in speaking so others will understand. + Read and understand information and ideas presented in writing. + Apply general rules to specific problems to produce answers that make sense. + Identify and understand the speech of another person.

Quality Control Technician - Hybrid Production Support Department: Modules Division Location: Trident Maritime Systems, Inc. - 900 39th Street, Newport News, VA Reports To: Senior Program Manager - Modules Division 1. PURPOSE To support quality compliance and production readiness efforts within the Modules Division by performing visual inspections, procedure adherence checks, and documentation verification while providing supplemental fitting and welding support through TIGER Team assistance when required to ensure continuity of WIP modules. 2. POSITION SUMMARY This role supports execution of critical quality checkpoints and production alignment in modular shipbuilding programs including CVN (Aircraft Carrier), VCS (Virginia-Class Submarine), and ORP (Columbia-Class Submarine). The QC Technician ensures compliance to welding, structural fabrication, and traceability requirements while contributing to production support wherever needed to maintain schedule performance. 3. RESPONSIBILITIES & DUTIES Perform visual weld inspections per NAVSEA and Newport News Shipbuilding PPD guidelines. Perform “in‑process” audits to verify work execution adheres to qualified procedures and inspection hold‑points. Verify OQE documentation compliance and production traveler traceability. Monitor work sequencing to ensure readiness for inspection and material availability. Document, classify, and report nonconformances and support corrective action activities. Support TIGER Team fitting and welding execution when needed to prevent schedule disruption. Assist with material staging, tooling readiness, and weld consumable oversight. 4. EXPERIENCE & QUALIFICATIONS 10 years Newport News Shipbuilding (NNS) production trades experience required. Minimum 3 years Make‑Up / Team Lead / Foreman experience. 4‑year Trade School Apprenticeship graduate preferred. Ability to read 2D/3D build drawings and electronic work packages. Proficiency with structural fitting and welding fundamentals. Understanding of NAVSEA structural quality standards required. Strong communication abilities to elevate quality risks to leadership. Microsoft Office competency required. 5. CERTIFICATIONS Must be able to obtain VT Level II certification. Certified welder qualification preferred. 6. FOCUS AREAS - PRE‑EXECUTION / EXECUTION / DELIVERABLES Pre‑Execution: Confirm drawings, OQE, and requirements prior to work execution. Assist workstation readiness and ensure material staging compliance. Execution: Perform structural weld inspections and procedure adherence checks throughout execution. Support TIGER Team efforts to ensure schedule compliance and maintain throughput. Align inspection priorities with material readiness and WIP tracking. Deliverables: Ensure OQE compliance and release modules as ready for customer inspections. Support closure of open quality items prior to deliverable turnover.

Job Description Responsible for executing quality control/assurance inspection, testing and verification of finished products, work in-process, procured materials and components to assess and verify conformance to requirements and production process capabilities. Facilitate continuous improvement of customer satisfaction and operational performance. Provide support to other departments including, but not limited to Production, Shipping, Service, and Purchasing. Key Areas of Responsibility: Inspect and test vendor supplied materials for conformance to specifications. Inspect and test customer returns. Inspect and test in-process products to assess conformance to specifications. Inspect and test final products to assess conformance to specifications. Record results of all inspection and testing activities accurately. Apply, or assure the application of, labeling to finished products as required: Serial number labels, certification (CE) and related Operate various inspection and test equipment in executing quality control/assurance testing and inspection procedures and operations including, but not limited to: X-ray imaging equipment (training provided) Ultrasound imaging equipment (training provided) Measuring devices such as micrometers, dial indicators, calipers, etc. Linear scales Surface plates Execute specific Quality Management System Procedures as assigned or required Communicate QC results and trends to Production Staff and Management team Be knowledgeable and follow Sun Nuclear Quality Management System policies and procedures Be knowledgeable and follow Sun Nuclear Safety policy and procedures Management has the right to add or change duties at any time. Qualifications and Experience: Education and Experience Minimum of 2 years' experience in quality control/quality assurance testing and inspection role required. Skills and Competencies Work consists of moderately complicated procedures and tasks that require independent judgments such as ability to evaluate results, and coordinate tasks with others. Errors may result in somewhat serious consequences involving customer relations, or damage to expensive equipment. Requires use of radiographic equipment and subsequent evaluation of radiographs (training provided). Ability to operate personal computer using standard computer applications (word processing, spreadsheets, database applications). Ability to read and interpret engineering drawings and specifications and other technical documents. Ability to effectively use measurement and test tools, devices, and equipment (dial indicators, micrometers, height gauges, surface plates, calipers, densitometers, etc.) to assess conformance to technical, physical, and performance requirements. Strong organizational skills and attention to detail are required.

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Quality Control Technician - Hybrid Production Support Department: Modules Division Reports To: Senior Program Manager - Modules Division 1. PURPOSE To support quality compliance and production readiness efforts within the Modules Division by performing visual inspections, procedure adherence checks, and documentation verification while providing supplemental fitting and welding support through TIGER Team assistance when required to ensure continuity of WIP modules. 2. POSITION SUMMARY This role supports execution of critical quality checkpoints and production alignment in modular shipbuilding programs including CVN (Aircraft Carrier), VCS (Virginia-Class Submarine), and ORP (Columbia-Class Submarine). The QC Technician ensures compliance to welding, structural fabrication, and traceability requirements while contributing to production support wherever needed to maintain schedule performance. 3. RESPONSIBILITIES & DUTIES * Perform visual weld inspections per NAVSEA and Newport News Shipbuilding PPD guidelines. * Perform "in‑process" audits to verify work execution adheres to qualified procedures and inspection hold‑points. * Verify OQE documentation compliance and production traveler traceability. * Monitor work sequencing to ensure readiness for inspection and material availability. * Document, classify, and report nonconformances and support corrective action activities. * Support TIGER Team fitting and welding execution when needed to prevent schedule disruption. * Assist with material staging, tooling readiness, and weld consumable oversight. 4. EXPERIENCE & QUALIFICATIONS * 10 years Newport News Shipbuilding (NNS) production trades experience required. * Minimum 3 years Make‑Up / Team Lead / Foreman experience. * 4‑year Trade School Apprenticeship graduate preferred. * Ability to read 2D/3D build drawings and electronic work packages. * Proficiency with structural fitting and welding fundamentals. * Understanding of NAVSEA structural quality standards required. * Strong communication abilities to elevate quality risks to leadership. * Microsoft Office competency required. 5. CERTIFICATIONS * Must be able to obtain VT Level II certification. * Certified welder qualification preferred. 6. FOCUS AREAS - PRE‑EXECUTION / EXECUTION / DELIVERABLES Pre‑Execution: * Confirm drawings, OQE, and requirements prior to work execution. * Assist workstation readiness and ensure material staging compliance. Execution: * Perform structural weld inspections and procedure adherence checks throughout execution. * Support TIGER Team efforts to ensure schedule compliance and maintain throughput. * Align inspection priorities with material readiness and WIP tracking. Deliverables: * Ensure OQE compliance and release modules as ready for customer inspections. * Support closure of open quality items prior to deliverable turnover.

Job Title: Quality Control Technician - Asphalt Department: Asphalt Lab Reports to: Manager - Asphalt Quality Control Major Role and Purpose: Perform all testing and sampling of materials in the lab or on the job site to ensure product meets specifications of customer and/or State. Description of Duties: Ensure a safe work environment in compliance with all federal, state, local and company safety policies and procedures using the appropriate tools and equipment for the task. Update and maintain current asphalt mix designs. Select products for tests at specified stages in the production process. Perform quality and gradation tests on aggregates and bituminous mixtures. Record test data into computer and evaluate results. Field test product (monitor temperature of mixtures, rolling patterns and roller speeds, paver speed and operation, appearance of paved material for consistent quality, and/or perform in place density tests). Troubleshoot problems with product as required. Inspect and calibrate lab equipment. Maintain the cleanliness of the lab. Ensure the plant is set up and running correctly. Prepare and distribute test reports on a timely basis. Communicate with plant foremen and road crew. Perform all other duties deemed necessary or assigned. Education: High School Degree required. Work Experience/Qualifications: Minimum 2 years of prior experience in quality control, asphalt environment preferred. Certificate in Basic Aggregates and HMA technician preferred. Asphalt Field Level I & II preferred. Good math skills. Valid driver's license and able to drive a company vehicle as required. Excellent communication, organizational and customer service skills. Ability to lift 90lbs (asphalt & aggregate samples). Physical Demands: Job requires the following motions: pushing, pulling, reaching, bending, and lifting. Ability to lift 90 lbs. (asphalt and aggregate samples). EOE/M/F/Disability/Vet About Branscome: OUR COMPANY For more than 60 years in Virginia, our crews have been safely delivering the infrastructure that our communities are built on. We take immense pride in building the things that you can see, but also those you can't. Camaraderie in the field, with our clients, and out in the community is the spirit that drives our dedication and commitment to excellence. Branscome's vertically integrated services provide a streamlined end-to-end scalable solution for our customers. It's the satisfaction of a job well done recognition of team effort and the delight of our customers that keep us creating infrastructure and connecting people. OUR TEAM When you work for Branscome, you join our innovative team in completing the area's most important large-scale, fast-track projects. You help us provide excavation, site work, underground utilities, asphalt paving, ready-mix concrete, and more to a slew of satisfied clients, including VDOT, Norfolk International Terminal, numerous local governments, private developers, and corporate entities. At Branscome, workers take pride in their work and inspire each other with their teamwork, innovation, and enthusiasm. This attitude of excellence generates the superior customer service that Branscome is known for. Branscome benefits include health, dental, vision, life insurance, paid time off, retirement savings and professional development. EQUAL EMPLOYMENT OPPORTUNITY When you work for Branscome, you join our diverse, innovative team. Our differences breed the ideas which fuel our success. Every aspect of our relationship with current and potential employees is free from discrimination and harassment based on race, color, religion, sex, national origin, age, genetic information, disability, veteran status, sexual orientation, gender identity, or any other category protected by applicable law. This pertains not only to initial employment and working conditions but also to all actions affecting hiring, promotions and transfers, training (including apprenticeship and pre-apprenticeship when required), compensation, benefits, and termination of employment. Adherence to this policy and compliance with the law is expected of all employees. If you need assistance completing the online application process, please contact the Human Resources department at **************. Branscome EEO Statement Branscome is an Equal Opportunity Employer. It is the policy of this Company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, color, national origin, age, disability, genetic information, military or veteran status, sexual orientation, gender identity, and any other characteristic protected by law. Such action shall include: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship, and/or on-the-job training. Branscome is in compliance with local, state, and federal laws and regulations and ensure equitable opportunities in all aspects of employment. Branscome will provide reasonable accommodation to all applicants who require assistance completing the online application process. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, please email **************** for assistance. We are committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: EEO is the Law and EEOC is the Law Supplement.

Job Description Burlington Medical is thrilled to provide a great career opportunity for a Quality Control Inspector on Second Shift. with one of the leading manufacturers and providers of radiation protection products. The hours for this position are 2:45pm -11:15pm. Job Purpose: To ensure compliance of products and processes. Duties: Conduct in-process, receipt, and final inspections. Initiate Non-Conformance reports (Material Rejection Notices) as required. Work with other company personnel to resolve nonconformances. Skills/Qualifications: 0-2 years quality control experience Ability to understand manufacturing processes and the means by which they are controlled Experience with statistical analysis of manufacturing processes Strong problem-solving skills A good work ethic Good interpersonal and communication skills High school Diploma or equivalent Word, Excel, Outlook knowledge preferred Operation of basic measuring devices Ability to work on their own

Responsible for executing quality control/assurance inspection, testing and verification of finished products, work in-process, procured materials and components to assess and verify conformance to requirements and production process capabilities. Facilitate continuous improvement of customer satisfaction and operational performance. Provide support to other departments including, but not limited to Production, Shipping, Service, and Purchasing. Key Areas of Responsibility: * Inspect and test vendor supplied materials for conformance to specifications. * Inspect and test customer returns. * Inspect and test in-process products to assess conformance to specifications. * Inspect and test final products to assess conformance to specifications. * Record results of all inspection and testing activities accurately. * Apply, or assure the application of, labeling to finished products as required: Serial number labels, certification (CE) and related * Operate various inspection and test equipment in executing quality control/assurance testing and inspection procedures and operations including, but not limited to: * X-ray imaging equipment (training provided) * Ultrasound imaging equipment (training provided) * Measuring devices such as micrometers, dial indicators, calipers, etc. * Linear scales * Surface plates * Execute specific Quality Management System Procedures as assigned or required * Communicate QC results and trends to Production Staff and Management team * Be knowledgeable and follow Sun Nuclear Quality Management System policies and procedures * Be knowledgeable and follow Sun Nuclear Safety policy and procedures * Management has the right to add or change duties at any time. Qualifications and Experience: Education and Experience * Minimum of 2 years' experience in quality control/quality assurance testing and inspection role required. Skills and Competencies * Work consists of moderately complicated procedures and tasks that require independent judgments such as ability to evaluate results, and coordinate tasks with others. * Errors may result in somewhat serious consequences involving customer relations, or damage to expensive equipment. * Requires use of radiographic equipment and subsequent evaluation of radiographs (training provided). * Ability to operate personal computer using standard computer applications (word processing, spreadsheets, database applications). * Ability to read and interpret engineering drawings and specifications and other technical documents. * Ability to effectively use measurement and test tools, devices, and equipment (dial indicators, micrometers, height gauges, surface plates, calipers, densitometers, etc.) to assess conformance to technical, physical, and performance requirements. * Strong organizational skills and attention to detail are required.

Job Description Electrical Quality Control (QC) Specialist, Federal Construction Location: Norfolk, VA | Full-Time | Onsite Butterfly Staffing is seeking a qualified Electrical QC Specialist to support an upcoming federal construction project in Norfolk, VA. This full-time, onsite position will oversee electrical scope quality compliance throughout the life of the project and report directly to the QC Manager. We're looking for an experienced electrical professional with at least 10 years in roles such as Project Superintendent, QC Manager, Project Engineer, or Construction Manager, and a strong background in electrical systems and federal QA/QC standards. Key Responsibilities: Oversee and inspect the electrical work performed on site to ensure compliance with plans, specifications, and contract requirements Coordinate with subcontractors, field supervisors, and the overall QC team to maintain quality across all electrical installations Review electrical submittals, shop drawings, RFIs, and as-built documentation Perform inspections and testing of systems including conduit, wiring, panels, lighting, and grounding systems Maintain accurate inspection reports, deficiency logs, and resolution tracking Support the QC Manager in managing the three phases of control (Preparatory, Initial, Follow-Up) for electrical work Ensure all work meets safety, code, and regulatory standards in accordance with project specs and applicable NAVFAC/USACE guidelines Qualifications: Bachelor's degree in Electrical Engineering or related field 10+ years of electrical construction experience in one or more of the following roles: Project Superintendent QC Manager Project Engineer Construction Manager Proven experience with government or military construction projects preferred Familiarity with EM 385-1-1, NFPA, NEC codes, and USACE/NAVFAC QC protocols Certifications: OSHA 30 Construction Safety CQM-C for Contractors (USACE/NAVFAC) CPR / First Aid DBIDS or the ability to obtain government base access

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Quality Control Technician - Hybrid Production Support Department: Modules Division Location: Trident Maritime Systems, Inc. - 900 39th Street, Newport News, VA Reports To: Senior Program Manager - Modules Division 1. PURPOSE To support quality compliance and production readiness efforts within the Modules Division by performing visual inspections, procedure adherence checks, and documentation verification while providing supplemental fitting and welding support through TIGER Team assistance when required to ensure continuity of WIP modules. 2. POSITION SUMMARY This role supports execution of critical quality checkpoints and production alignment in modular shipbuilding programs including CVN (Aircraft Carrier), VCS (Virginia-Class Submarine), and ORP (Columbia-Class Submarine). The QC Technician ensures compliance to welding, structural fabrication, and traceability requirements while contributing to production support wherever needed to maintain schedule performance. 3. RESPONSIBILITIES & DUTIES Perform visual weld inspections per NAVSEA and Newport News Shipbuilding PPD guidelines. Perform “in‑process” audits to verify work execution adheres to qualified procedures and inspection hold‑points. Verify OQE documentation compliance and production traveler traceability. Monitor work sequencing to ensure readiness for inspection and material availability. Document, classify, and report nonconformances and support corrective action activities. Support TIGER Team fitting and welding execution when needed to prevent schedule disruption. Assist with material staging, tooling readiness, and weld consumable oversight. 4. EXPERIENCE & QUALIFICATIONS 10 years Newport News Shipbuilding (NNS) production trades experience required. Minimum 3 years Make‑Up / Team Lead / Foreman experience. 4‑year Trade School Apprenticeship graduate preferred. Ability to read 2D/3D build drawings and electronic work packages. Proficiency with structural fitting and welding fundamentals. Understanding of NAVSEA structural quality standards required. Strong communication abilities to elevate quality risks to leadership. Microsoft Office competency required. 5. CERTIFICATIONS Must be able to obtain VT Level II certification. Certified welder qualification preferred. 6. FOCUS AREAS - PRE‑EXECUTION / EXECUTION / DELIVERABLES Pre‑Execution: Confirm drawings, OQE, and requirements prior to work execution. Assist workstation readiness and ensure material staging compliance. Execution: Perform structural weld inspections and procedure adherence checks throughout execution. Support TIGER Team efforts to ensure schedule compliance and maintain throughput. Align inspection priorities with material readiness and WIP tracking. Deliverables: Ensure OQE compliance and release modules as ready for customer inspections. Support closure of open quality items prior to deliverable turnover.

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Burlington Medical is thrilled to provide a great career opportunity for a Quality Control Inspector on Second Shift. with one of the leading manufacturers and providers of radiation protection products. The hours for this position are 2:45pm -11:15pm. Job Purpose: To ensure compliance of products and processes. Duties: Conduct in-process, receipt, and final inspections. Initiate Non-Conformance reports (Material Rejection Notices) as required. Work with other company personnel to resolve nonconformances. Skills/Qualifications: 0-2 years quality control experience Ability to understand manufacturing processes and the means by which they are controlled Experience with statistical analysis of manufacturing processes Strong problem-solving skills A good work ethic Good interpersonal and communication skills High school Diploma or equivalent Word, Excel, Outlook knowledge preferred Operation of basic measuring devices Ability to work on their own