Quality control analyst jobs in Youngstown, OH - 51 jobs

Job Description Job Type: Full-Time | Contract Schedule: Initial Shift: Monday-Friday, 7:00 AM - 3:30 PM Transition to: 3rd Shift | Sunday-Thursday, 11:00 PM - 7:00 AM Pay Rate: $22.00/hour FLSA Status: Non-Exempt Duration: ~7 months (212 days) Job Summary As a Quality Control Analyst, you will play a critical role in ensuring the safety, quality, and compliance of raw materials and finished products by performing analytical and microbiological testing in a Quality Control (QC) laboratory. This role supports manufacturing operations by adhering to cGMP standards and regulatory guidelines. Key Responsibilities Perform routine and non-routine chemical and microbiological analyses of raw materials, in-process samples, and final products according to established specifications. Operate and maintain laboratory instrumentation (e.g., pH meter, conductivity meter, UV-Vis, Karl Fischer, FTIR, titrators) following standard procedures. Apply compendial methods (USP, EP, BP, JP, ACS) and EXCIPACT standards in testing activities. Calculate, record, and interpret analytical data for compliance, entering results into LIMS. Conduct environmental monitoring in classified cleanroom areas, including air and surface sampling (requires full gowning). Perform technical reviews of data, water testing, and environmental monitoring results. Investigate out-of-spec results, support complaint resolution, and assist in instrument troubleshooting. Apply appropriate material disposition labeling (e.g., accepted/rejected). Author, revise, and review laboratory SOPs and instrument work instructions. Conduct microbiological assays, including bioburden, endotoxin, DNase, RNase, protease, and phosphatase, using aseptic technique. Prepare and dispose of microbial media following safety protocols. Handle hazardous materials while following proper PPE and safety procedures. Support sampling and testing of USP Purified Water and Water for Injection (WFI). Ensure accurate, complete, and legible documentation in compliance with GMP and internal procedures. Qualifications: Education: Bachelor's degree in a scientific discipline (e.g., Chemistry, Biology, Microbiology) Experience: 1-3 years of laboratory experience in a regulated QC or related environment Experience in wet chemistry and microbial testing preferred (e.g., titrations, water content, bioburden, endotoxin testing) Knowledge, Skills & Abilities Proficient in the use of laboratory instruments and analytical techniques Familiar with LIMS and Microsoft Office Suite (Excel, Word, PowerPoint, Access) Strong attention to detail with excellent problem-solving and analytical skills Effective written and verbal communication skills Ability to work both independently and collaboratively in a fast-paced, regulated environment Work Environment & Physical Requirements Work primarily in a laboratory setting with standard lighting, ventilation, and noise levels Occasional exposure to chemicals (flammables, oxidizers, corrosives) with proper PPE Moderate physical activity may be required: standing, walking, reaching, and lifting objects up to 10 lbs Must be comfortable working in cleanroom environments and wearing full gowning when necessary #LI-DN1

**Now hiring! QC Lab Technician - Monaca, PA** **Pay Range: $25.00-26.00/ hr. / Night Shift differential / Performance Incentive Bonus/ Full Benefits Package / 401k Options** We are looking for a **Quality Control Lab Technician** to join our **Dispersions team** in **Monaca, PA.** **Come create chemistry with us!** **During your rotating 12-hour shift as a QC Lab Technician, you will** **Principal Responsibilities** + Actively supporting and promoting a safe working environment, participating in all safety trainings and programs, and supporting Environmental, Health, Safety, and Security plant initiatives. + Using a variety of testing equipment including GCs, HPLC, FTIR, Spectrophotometers, Viscometers, Ovens, balances, pH meters, Microscopy, LIMS & SAP data systems. + Using appropriate software to evaluate data based on internal and external specifications, procedure requirements, and LIMS programming, as well as entering information into SAP software. + Quality assurance testing of in-process and finished latex products within the scope of the BASF Quality Policy and ISO 9001 Quality Management System which includes testing using pH, viscosity, gas chromatography, and other analytical techniques. Other testing as required including waste water samples. + Performing bacteria testing + Supporting the continuous improvement of lab and plant processes through QA/QC activities, instrument troubleshooting and maintenance, and meeting/exceeding customer expectations. + Interacting with the Supply Chain and Operations departments at the Monaca site to expedite shipments to customers utilizing SAP + **Available to work rotating 12 hour shifts 7:30am-7:30pm and vice versa and overtime when needed** **Process Safety Management Responsibilities** + Process safety roles and responsibilities across the organization are clearly defined and include an expectation to raise, and authority to respond to process safety concerns. Employees understand the importance of process safety as it applies to their jobs and are responsible for following and contributing to the work processes to achieve improvement in company process safety performance. **Formula for Success ...** + 2 yr Associates degree or technical degree in Chemistry/Analytical testing OR related field with lab experience **OR** High School Diploma/GED with minimum 2+ years of relevant industrial lab experience required. + Experience working in a manufacturing environment on a 12 hour rotating shift + Experience with Microsoft Office products; Word, PowerPoint, Excel and ability to operate various computer-controlled instruments. + Knowledge of testing equipment found in laboratory setting; GCs, HPLC, FTIRS, Viscometers + Basic understanding of general chemistry, techniques of quality assuarance and quality control + Basic understanding of math, statistics, analytical methodology, insight into problem solving, and ability to record and report pertinent data. + On occasion, must be able to lift up to a maximum of 30 lbs. + Must be able to follow both written procedures, verbal instructions and follow all applicable safety procedures including correct personal protective equipment. + Willing and available to work **rotating 12 hour shifts (7:30am-7:30pm and vice versa)** and overtime when required **Preferred Skills** + Experience working in an ISO or GMP compliance driven lab environment + Experience with emulsion polymerization products, laboratory testing and practices + The preferred candidate will have minimum 2+ years' experience in a lab position of increasing responsibility. \#dispersionsresins&additives **Create your own chemistry with you@BASF** At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call **you@BASF** . We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: + Flexible work arrangements whenever possible + Highly competitive retirement savings plan with company match and investment options + Well-being programs that include comprehensive mental health support for you and your household family members + Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) + Back-up child and elder care with discount programs for families of all ages and stages + Mentoring and career development opportunities that allow you to share, learn, and thrive + Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. + Employee crisis support for when the unexpected happens + Access to our BASF wine cellar, employee discounts, and much more! **About us** As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF **Privacy statement** BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ***************************** to report fraud. **Equal employment opportunities** We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Eddie Kane Steel Products has been a family owned and operated business providing exceptional service in the steel industry for over 25 years. The company motto has always been to "Treat others as you would have them treat you" and we are in search of a full time Quality Control Technician at our facility located in Masury, Ohio. General Description: Responsible for ensuring quality products leave our production facility. Key responsibilities include part inspection, document collection and verification, quarantining non-conforming material, root cause analysis and corrective action of rejections. Primary Duties and Responsibilities: Visual and physical spot inspections of products received and produced (Nuts, Washers, Bolt Threads, Flame Cut Steel Plate). Visual inspection of anchor bolt cage welds. Ensure inspected products meet company quality requirements and safety standards. Perform inspections using tape measures, micrometers, calipers, thread gages, comparators, weld inspection tools, etc. File and maintain all inspection and other quality documents. Maintain equipment calibration and measuring & testing equipment. Monitor and control non-conforming material. Evaluate problems, determine root causes, and make recommendations for possible corrective actions. Ensure identification and traceability of all finished goods in the yard. Work with engineering to make sure all customer quality specifications are being met. Perform CAD reviews and Order reviews. Perform projects as assigned and other duties as assigned by Quality Engineer and Corporate Quality and Service Engineer. Other duties as assigned. Required Knowledge and Skill Sets: Excellent (English) oral and written communications skills . Good interpersonal skills, phone manners and the ability to work with others. Ability to establish positive relations with customers and vendors as necessary. Ability to provide guidance, in a constructive manner, in the event of a non-conformance. Basic reading and mathematical skills (addition, subtraction, multiplication, division). Proficient with tape measure and other measurement tools (micrometer, caliper, straight edge, etc.). Knowledge of Microsoft Outlook, Excel, Word, and Basic Data Entry. Good organizational, planning and time management skills. Steel Manufacturing background (preferred). Welding/VT Inspection Experience/Certification (preferred). Working knowledge of AWS D1.1 / D1.4 welding code (preferred). Ability to interpret ASTM/ASME Code as they apply to the product (preferred). Education/Experience: High School Diploma or equivalent Proficiency in CAD (preferred) Associates Degree or equivalent (preferred) Quality Inspector Experience (preferred) Knowledge of Lean Manufacturing Methodology (preferred) The health and safety of our Eddie Kane Steel Products employees is of the utmost importance to us and ensure that we have all PPE (Personal Protective Equipment) and hand sanitizer available to our employees, take employee, visitor and vendor temperatures, disinfect all common areas, practice social distancing and washing hands throughout the day to maintain a safe and healthy work environment! ** NO AGENCIES ** NO PHONE CALLS ** NO RELOCATION ** NO WALK INS ** Work schedule 8 hour shift Benefits Paid time off Health insurance Dental insurance Vision insurance Life insurance 401(k) 401(k) matching Referral program Employee discount Other

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

We are adding to our Pharmaceutical Quality Control Chemistry Staff. We are currently seeking entry level individuals to: Perform analytical testing of raw material, in-process product, final product release and stability testing. Clear documentation of test activities in approved worksheets and laboratory notebooks. Execute mathematical calculations as outlined in test methods. Assess data to determine if the material tested meets specifications. Peer review of quality control data. Participate in investigational testing and assist with root cause analysis. Create and review SOP s and author Change Controls. Other general lab related duties as necessary. We are seeking individuals with: Bachelor's degree in Chemistry, Biochemistry, Biology, or related field One to two years' experience with hands on testing such as pH, titrations, determination of physical appearance, UV, IR and other wet chemistry tests. Instrumentation work with KF, HPLC, and GC, including instrumentation software a plus. Hands-on analytical chemistry experience Prior success working with regulatory, USP, GLP, GDP, and cGMP requirements. Ability to use Microsoft Suite of tools. Pharmaceutical experience a plus.

Job Description JetPack Shipping is a leader in private label fulfillment. It is our mission to provide effortless on-demand private label products while fixating on providing a transparent customer experience. We drive operational excellence into our processes and capabilities while continuously creating growth for our employees, partners, and consumers. We are always on the lookout for like minded individuals to add to our ever growing staff. Summary: A Quality Control Specialist in the dietary supplement industry is responsible for ensuring that all products meet established standards of quality and safety before they reach consumers. This role involves developing, implementing, and monitoring quality control processes and procedures. Key responsibilities include conducting inspections and tests on raw materials, in-process products, and finished goods, maintaining detailed records of quality checks, and identifying areas for improvement. The specialist collaborates with production and compliance teams to ensure adherence to regulatory requirements, such as those set by the FDA and GMP regulations. Strong analytical skills, attention to detail, and knowledge of industry standards are essential for success in this position. We are hiring for 1st and 2nd Shift. Responsibilities: A Quality Control Specialist in the dietary supplement industry is responsible for ensuring that products meet specific standards of quality and safety before they reach consumers. This involves overseeing the entire production process, from raw material selection to finished product testing, to ensure compliance with regulatory requirements and company standards. Their role is critical in safeguarding consumer health and maintaining brand reputation by preventing the distribution of substandard or unsafe products. Quality Control & Auditing: Conduct routine inspections of raw materials, in-process production, and finished goods. Perform line checks and verification of manufacturing and packaging processes. Audit batch records and verify compliance with Good Manufacturing Practices(GMP). Production Process Monitoring: Verify that manufacturing processes comply with Good Manufacturing Practices (GMPs). Monitor critical control points to prevent deviations from batch standards. Ensure proper calibration and maintenance of equipment. In-Process Testing: Conduct tests at various stages of manufacturing to ensure composition and quality. Check for uniformity and consistency in capsule or tablet weight, dissolution, and disintegration. Finished Product Testing: Perform thorough testing of the final product for active ingredient potency and purity. Ensure compliance with product specifications, including label claims. Test for microbial contamination and other potential safety hazards. Document and Record Keeping: Maintain accurate and detailed records of inspections, tests, and audits. Ensure traceability of all materials and products through comprehensive documentation. Root Cause Analysis and Corrective Actions: Investigate quality issues or product failures to determine root causes. Implement corrective and preventive actions to avoid recurrence. Continuous Improvement: Identify areas for process improvement to enhance product quality and efficiency. Foster a culture of quality and safety awareness within the organization. By focusing on these areas, a Quality Control Specialist can help ensure that dietary supplements are safe, effective, and of high quality, thereby protecting consumer health and maintaining regulatory compliance.

Responsible for executing the Quality Assurance functions of the division, including but not limited to Quality policies, procedures and programs to ensure compliance to the ISO 9001:2015 standard, customer specifications, and customer satisfaction. Promote positive relations with the production staff to enhance the Quality culture and awareness. Essential Duties and Responsibilities Takes responsibility for their own safety and the safety of all employees by adhering to all safety policies and procedures and reporting all safety concerns to management. Utilizes the forklift operator safety plan, emergency action plan and accident reporting Know what the Company Quality Policy and Quality Objectives mean to them and their role associated with the achievement of these objectives. Acknowledges the Quality Policy Manual Audit the preparation of In-Process and Final Audit Report (WIP Sheets) Prepare In-Process and Final Audit Report (WIP Sheets) based on customer prints Understand the nonconforming material control, control of QMS documents, control of QMS records, internal audit, and corrective and preventive action procedures Maintenance of the MRB areas including the initiation of disposition of materials within the (MRB) material review board process Thorough knowledge of Nonconforming Material Reporting - NCMR form and work instruction Thorough knowledge of Corrective and Preventive Actions Reports (8D) Good understanding of the ISO 9001 requirements and related QMS processes 1st Piece Approval Process Generation of PPAP, ISIR and FAI layouts and other workbook documents. Assist production with print interpretation and gauging when needed. Operation of CMM, Faro Arm, Virtek, or any other Quality Instruments Good understanding of process capability studies and analysis. Perform floor inspection, shipping & receiving, source and final inspections with maintenance of records and logs. Perform internal audits of QMS under the direction of a Lead Auditor. Participate in determining root cause of defects and assists in the Corrective / Preventive Action Process. Receipt of On-The-Job-Training from Quality Supervisor or Quality Assurance Manager. Must wear required safety equipment and follow Safety Policy. Place HOLD tags on products they determine to be suspect. (Identification and Traceability) Has the authority to OK work to proceed after the 1st Pc. Approval or rework process using the Identification and Traceability tag process Complete responsibility for customer satisfaction through their quality of work using a specified sampling plan and understanding first and last piece inspection the goal is to reduce variability to achieve zero defects for our products and services while reducing costs. Strong (advanced) GD&T knowledge Clock in and out of jobs using shop floor manager in Intuitive ERP system Complete receiving inspection of product Other duties as directed. Non-Essential Duties Participate and support company initiatives, programs, events, and meetings for employee enhancement and development. Supervisory Responsibilities Serves as a backup for other technicians, when QC Supervisor or Manager are not available. Minimum Qualifications Education: A High School Degree or equivalent combination of experience and education Experience: 1 Computer Skills: CAD Certificates, Licenses, Registrations: None Special Requirements: Proficient in Blueprint reading, interpretation & GD&T. Comprehensive knowledge of inspection gages and methods including but not limited to micrometers, calipers, protractors, height gage, tape rules, Developmental opportunities: CMM, Faro Arm, Virtek and GD&T Strong knowledge of manufacturing processes to include assembly, stamping, laser, CNC punch, press brake and welding or similar manufacturing environment. Language Skills Ability to read and understand work instructions and procedures. Ability to respond to common inquiries. Ability to generate concise graphs and reports for presentations. Reasoning Ability Ability to define problems, collect data, establish facts, and present findings to management. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/ or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duty of this job, the employee is may be exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold and risk of electrical shock. The noise level in the work environment is usually moderate. Temperature and humidity extremes are to be expected similar to ambient outside conditions. Job Type: Full-time Expected hours: 48 per week Benefits: 401(k) / Matching Medical/Dental/Vision Insurance Employee Assistance Program Health Savings Account Life Insurance PTO Schedule: First Shift, Monday - Friday; Overtime/Weekends as needed Experience: Quality; 1 year (Preferred) Shift availability: Day Shift Work Location: In person, Streetsboro Ohio Alacriant is an Equal Employment Opportunity Employer. Alacriant does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

JOB DETAILS Base Pay Rate: $21.00 per hour 1st Shift: Monday-Thursday 6:00 am - 4:30 pm; Friday overtime is expected during peak business seasons and as required by production needs. As a Quality Control Technician at Cornerstone Building Brands, you will be responsible for ensuring that windows and related materials meet quality standards throughout the manufacturing process, from raw materials to finished products. You will perform inspections, document findings, and communicate quality issues to ensure that only high-quality windows are shipped to customers. Key Responsibilities: Inspecting materials and finished products: Checking for defects, measuring dimensions, and verifying specifications against blueprints Documenting findings: Record inspection results in logs and reports, often utilizing software systems Communicating quality issues: Inform production teams, engineers, and supervisors of any quality concerns or deviations from standards Identifying areas for improvement: Analyze data and identify opportunities to improve the quality of products and processes Assisting with problem-solving: Work with other teams to troubleshoot quality issues and implement corrective actions Qualifications Strong attention to detail: The ability to identify subtle defects and variations Knowledge of manufacturing processes: Understanding of the different stages of window manufacturing Good communication skills: The ability to clearly document findings and communicate concerns to others Basic computer skills: Proficiency in using software for documentation and data analysis Ability to follow procedures: Adherence to safety protocols and quality control guidelines Experience with Lean Manufacturing or Six Sigma: Methodologies are valuable for identifying and addressing quality issues Knowledge of specific industry standards: Familiarity with standards related to window manufacturing Physical Stamina: Ability to lift and move window units Additional Information This position is with SoftLite Windows & Doors, part of Cornerstone Building Brands. Please note that our facility signage and operations reflect the SoftLite name. Address: 10250 Philipp Pkwy., Streetsboro, OH 44241 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play . Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here . You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here . If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or [email protected] . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or [email protected] . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

As a Quality Control Analyst, you will play a crucial role in ensuring the quality of raw materials and finished products in our Quality Control laboratory. You will be responsible for conducting various chemistry and microbiological analyses, maintaining lab equipment, and ensuring compliance with established specifications. Responsibilities * Conduct routine and non-routine chemistry and microbiological analysis of raw materials, in-process formulations, and final products according to established specifications. * Operate laboratory equipment and instruments in accordance with laboratory procedures, including pH, conductivity, UV, KF, FTIR, and titrations. * Understand and follow Quality Control test methods or compendia methods such as USP, EP, BP, JP, or ACS and EXCIPACT standards. * Calculate and generate data for compliance to specifications and report results. * Perform technical review of lab data forms such as water, environmental monitoring, and direct measure analysis. * Calibrate and maintain lab equipment. * Enter final results and raw data for tested materials or products in LIMS as needed. * Perform investigative analysis to support investigations, complaints, or instrument troubleshooting. * Conduct Environmental Monitoring duties, including gowning into cleanrooms and collecting air and surface samples. * Review discrepancies in data, manufacture COA, COC, and perform data verification in accordance with company procedures. * Apply appropriate disposition labels to materials (accepted, rejected, etc.). * Handle hazardous materials using all appropriate or mandatory safety PPE and safety equipment. * Complete documentation legibly and review for accuracy. * Perform sampling and testing for USP Purified water and Water for Injection. * Author, review, or update lab procedures and lab instruments Work Instructions. * Perform microbiological tests such as bioburden, endotoxin, Dnase, Rnase, Protease, and Phosphatase using proper aseptic techniques. * Prepare and properly dispose of microbial media. Essential Skills * Quality control * GMP * Laboratory experience * Chemistry * Microbiology * HPLC * Quality assurance * Biology * Environmental monitoring * Biochemistry * Wet chemistry Additional Skills & Qualifications * Bachelor's degree in a science discipline such as Chemistry or Biology. * 3 years of laboratory experience in a related field. * Experience with wet chemistry and microbial testing (e.g., Acid/Base Titrations, water content, Bioburden, Endotoxin). * Proficiency in aseptic techniques. Work Environment The role is based in a lab and office environment with adequate lighting and ventilation, maintaining a normal range of temperature and noise levels. You may occasionally be exposed to a variety of chemicals, including flammables, corrosives, and oxidizers. Work assignments are varied, and you will often rely on past precedents to resolve work problems, with the opportunity to develop new solutions. The role is mostly sedentary but does require some physical activity such as walking, standing, bending, reaching, and lifting or carrying objects weighing less than 10 lbs. Job Type & Location This is a Contract to Hire position based out of Aurora, OH. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Aurora,OH. Application Deadline This position is anticipated to close on Jan 25, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Department: Capital Markets Reports to: QC - Capital Markets FLSA: Hourly Essential Duties and Responsibilities Researching properties and resolving issues Perform title examination and examine the chain of title for a wide range of title orders, primarily residential Abstracts and analyzes records such as mortgages, liens, judgments, easements, vital statistics, and plat and map books to determine both ownership and legal restrictions and to verify legal description of property and completeness of records Resolves most issues such as missing information, incomplete, inaccurate or contradictory information contained in the title documentation Prepares initial title commitment documentation based on the application of procedural guidelines All other duties assigned Qualifications 3 years' experience with a national title agency in either Title Exam or Title Curative. High School diploma or equivalent Knowledge of real estate title searching Must demonstrate advanced organizational ability and strong communication skills, with a proven capacity to multitask effectively across multiple functions and priorities in a fast‑paced environment Knowledge of personal computers and Microsoft software products Advanced Microsoft Excel skills, including proficiency with VLOOKUP, Pivot Tables, and formula creation Language Skills Excellent written and verbal communication skills Ability to read, analyze and interpret common technical reports, and documentation Present information to executive and senior management teams, sales department, internal groups and/or clients Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell The employee must occasionally lift and/or move up to 25 pounds Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to weather conditions prevalent at the time. The noise level in the work environment is usually moderate

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

SummaryThe Quality Control Inspector is responsible for all incoming materials to ensure they meet quality standards before being shipped out to customers. They also inspect products at every stage of production to guarantee final product meets customer specifications.Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Responsibilities: Complete and file quality records including receiving files and non-conforming material reports. Proficiency in working alongside other departments when addressing problems or discrepancies and maintaining detailed records Count, weigh or measure items of incoming shipments in order to verify information against invoices, orders, or other records Experience reading mechanical drawings and able to verify parts dimensions against drawing/specification requirements Examine and unpack incoming shipments; record shortages and reject damaged items Examine incoming shipments to ensure they meet specifications Ability to use various measurement devices (e.g., calipers, pin gauges, go/no-go gauges, micrometers, etc.) Excellent mechanical proficiency and keen attention to detail Ability to optimally interpret data and present as information and respond to questions from engineers and other technical staff Ensure that all documents and material received in the incoming inspection are of satisfactory quality Other duties as assigned Qualifications: High School Diploma required Minimum 2 years' experience in quality control Working knowledge of Microsoft Office Suite including Word, Excel, PowerPoint and Outlook Strong communication skills both verbal and written Ability to multitask and prioritize work activities based upon financial impact to desired business goals Demonstrated problem solving skills required At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work LocationUSA PA - ZelienopleAdditional LocationsWork Shift

Job Description Job Title: Quality Control Technician Department: Quality Reports To: Quality Control Lead and/or Director of Quality Assurance Prepared: 12-27-05 HR Revised: 1/17/19 MS This position is responsible for assuring the organization's quality system activities are producing desired results and to assure manufactured products meet customer requirements. Must have the ability to solve practical problems and deal with a variety of concentric variables in situations where limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral and/or schedule format. AUTHORITY: This individual has authority over no other employee but may ask others within the department assigned to assist them with tasks. Please see ACC organizational chart for more detailed information. ESSENTIAL FUNCTIONS (include but are not limited to):  Provide technical and process support to engineering, manufacturing, sales and purchasing groups  Assist with calibration system  Assist with corrective and preventive actions  Assist with audits and continually improve the Quality Management System  Hands on interaction with manufacturing process control activities - dimensional and visual inspection, record keeping  Maintain a clean and safe work area  Other duties as assigned by Quality Control Lead or Director of Quality Assurance  Arriving at work on time for every scheduled shift PREFERRED QUALIFICATIONS:  Associates degree or equivalent experience  Ability to read and interpret documents such as safety rules, work instructions, and procedures  Ability to write routine daily reports and correspondence as necessary and to request additional support as needed  Ability to communicate with all levels of the organization  Ability to add, subtract, multiply, divide, and average in all units of measure, using whole numbers, common fractions, and decimals  Ability to interpret part drawings and tolerances  Knowledge and use of various inspection tools, including but not limited to bore, pitch, micrometers and caliper to ensure Quality Assurance specifications are met  Some knowledge of ISO 9001 quality systems  Some knowledge of SPC and calibration systems  Metals industry and/or testing experience desirable  Ability to enter data into a computer (MS Access, Word, Excel, etc.) 15 Church Street P.O. Box 107 Wheatland, PA 16161 F-JD017 Last Revised 1/17/19 *If candidates do not meet all of the above requirements, ACCI at its discretion can provide additional training in the appropriate areas for job qualification. CERTIFICATES, LICENSES, REGISTRATIONS: A valid Driver's License is required. STANDARDS OF PERFORMANCE: The employee will be expected to be self-motivated, have sense of urgency, problem solving skills, responsible and self-accountable. PHYSICAL REQUIREMENTS: While performing the duties of this job, the associate is regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. The associate frequently is required to sit, walk, stand, climb, balance, stoop, kneel, crouch, or crawl to support production needs. The associate must regularly lift and/or move up to 25 pounds and occasionally lift and/or move more than 45 pounds. Specific vision abilities required by this job include close vision, distant vision (with or without corrective lenses), color vision, and the ability to adjust focus as determined through passing a vision acuity test. WORK ENVIRONMENT:  Production paced operation to support customer (internal and external) demands.  Supporting production changes as needed. OTHER JOB REQUIREMENTS:  Must be 18 years of age or older.  Must have a high school diploma or GED equivalent.  Must maintain an orderly work area and properly care for Company and Customer property.

Job Title: Fire Protection QC Inspector - Kitchens & Fire Extinguishers Location: Akron, OH Silco Fire & Security isn't just a company, it's a mission. Every day, our team plays a vital role in protecting lives and property for over 45,000 businesses across Ohio, Kentucky and surrounding states. We design, install, maintain and monitor fire protection and security systems that keep people safe and businesses compliant. As the market leader in the Midwest, Silco is a growing, family-owned company with over 500 employees working from our headquarters in Cincinnati and branches in Dayton, Columbus, Toledo, Akron, Cleveland and Louisville. Recognized as a Top Workplace and named to the Inc. 5000 list of fastest-growing private companies, we have a long-standing track record of success and ambitious goals for the future. Our impact extends beyond fire alarms and sprinklers. We provide peace of mind to the communities we serve. At Silco, you're not just doing a job, you're making a difference. Position Overview: We are seeking a highly skilled and experienced Quality Control Inspector with a minimum of 5 years of expertise in the fire protection industry. The ideal candidate will play a crucial role in ensuring that our products and installations adhere to the highest standards. Responsibilities: Conduct Quality Inspections: Performing Quality Checks on inspections that have been performed on Kitchen Fire Protection Systems and Fire Extinguishers Ensure that inspections and installations comply with state and NFPA codes and regulations. Documentation and Reporting: Maintain detailed records of inspection findings, documenting any deviations or non-compliance issues. Generate comprehensive reports daily that will be distributed to employees and their managers. Collaboration: Work closely with Operation Managers, Supervisors, and service and installation teams to address quality concerns, provide guidance on corrective actions, and improve our quality standard. Provide consultations with techs and suggested follow up training when needed. Continuous Improvement: Participate in the development and implementation of quality control procedures and protocols. Identify opportunities for process improvements to enhance overall efficiency and effectiveness. Training and Development: Provide training to inspection teams on quality control standards, best practices, and regulatory requirements. Stay informed about industry advancements and changes in codes and standards. Qualifications: Minimum of 5 years of experience within the fire protection and life safety systems industry. Experience with Kitchen Suppression Systems and Fire Extinguishers is preferred. In-depth knowledge of relevant codes and standards (i.e. NFPA, local building codes). Strong attention to detail and excellent analytical skills. Ability to work independently and collaboratively within a team. Benefits: In addition to a competitive compensation package, Silco offers a wide range of benefits such as medical, dental, vision, Aflac and a Flexible Spending Account (FSA). Silco offers company paid short-term disability and life insurance, as well as company paid training. The Company also boasts a 401(k) program with company matching and tuition reimbursement. Silco provides paid holidays and generous paid time off. Employment at Silco is contingent upon completing and passing a background check and drug screen. Silco is an Equal Opportunity Employer.

Exciting Opportunity to Join Our Legacy of Environmental Leadership! About Us: At Arcwood Environmental, we are more than just a company; we are pioneers in industrial waste management, committed to creating a cleaner, safer world. Since our inception during the environmental movement of the 1970s, we've been at the forefront of solving complex environmental challenges. Headquartered in Indianapolis, Indiana with a dedicated team of 2,000+ employees spread across the United States, we provide innovative and compliant solutions to thousands of clients in diverse industries. Why Arcwood? * Impactful Work: Be part of a team that makes a real difference. Our comprehensive services range from hazardous waste management and emergency response to onsite support and technical solutions, allow us to solve our customers' waste challenges. We are part of the solution. We don't generate any waste ourselves. * Growth Opportunities: At Arcwood, your contribution is valued beyond your job title. We believe in the power of continuous learning and growth, encouraging every employee to expand their skills and take on new challenges. * Safety First: Your health and safety are our top priorities. We foster a culture where every employee is empowered to act safely and ensure the well-being of their colleagues. Our mantra is Safe and Compliant, or Not at All. * Collaborative Environment: Together we can achieve much more. Join a supportive and dynamic team where your ideas and efforts are recognized and rewarded. Our Commitment: We are dedicated to fostering an inclusive and innovative workplace where every employee can thrive. As part of our team, you will have the freedom to contribute your expertise wherever needed, ensuring the success of our mission to protect the environment. Our Vision: Our vision is to be the most trusted partner in the environmental services industry. We put our customers first and deliver agile, sustainable, and innovative solutions. We commit to nurturing top talent and creating lasting value for our customers, shareholders, communities, and the planet. Our Ownership: Arcwood Environmental is backed by the EQT Infrastructure VI fund, enhancing our capabilities, and expanding our reach. EQT is a dynamic global investment powerhouse managing EUR 232 billion in assets (EUR 128 billion fee-generating). With a focus on Private Capital and Real Assets, EQT owns and supports leading companies across Europe, Asia-Pacific, and the Americas, fostering sustainable growth, operational excellence, and market leadership. This exciting ownership positions us for continued impacts and growth in the future. Field Chemist - Traveling Responsible for sorting, and transporting hazardous and non-hazardous materials and waste. Will ensure compatibility and safety processes at all time for each job and lab pack services provided to customers. Heavy travel for extended periods of time will be required as this position will fill in at outside locations as necessary. Essential Functions & Requirements: * Ensures Health & Safety is the number one goal by following policies, processes, and acting in a safe manner at all times. * Assist in the segregation of chemicals by hazard class; packing compatible materials in appropriate containers and preparing for transportation; completing necessary paperwork per job. * Determines and loads supplies needed for job completion and travels to various industry, laboratory, and school sites to perform lab pack services. * Assists in characterizing materials at field project sites. * Follows proper placarding and load segregation requirements when transporting hazardous materials. * Develop good client relations by effectively communicating with Customers. * Directs Field Technicians/Drivers assisting with waste collection. * Introductory knowledge of high hazard materials management /assessment and cylinder handling. Education: * Four-year college degree (Science or environmental majors preferred) or 2+years related experience required. Experience: * Prior lab packing or environmental waste experience preferred. Benefits, Compensation, & Workforce Diversity: Arcwood offers competitive pay and bonus incentives. Benefits include choice of medical, dental, and vision plans, flexible spending or health savings accounts, employee and dependent life insurance, short and long-term disability, 401(k) savings plan with 7% company match, and tuition reimbursement. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran or status as a qualified individual with a disability. A post-offer drug screen will be required.

The Quality Control Inspector is responsible for all incoming materials to ensure they meet quality standards before being shipped out to customers. They also inspect products at every stage of production to guarantee final product meets customer specifications. Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Responsibilities: * Complete and file quality records including receiving files and non-conforming material reports. * Proficiency in working alongside other departments when addressing problems or discrepancies and maintaining detailed records * Count, weigh or measure items of incoming shipments in order to verify information against invoices, orders, or other records * Experience reading mechanical drawings and able to verify parts dimensions against drawing/specification requirements * Examine and unpack incoming shipments; record shortages and reject damaged items * Examine incoming shipments to ensure they meet specifications * Ability to use various measurement devices (e.g., calipers, pin gauges, go/no-go gauges, micrometers, etc.) * Excellent mechanical proficiency and keen attention to detail * Ability to optimally interpret data and present as information and respond to questions from engineers and other technical staff * Ensure that all documents and material received in the incoming inspection are of satisfactory quality * Other duties as assigned Qualifications: * High School Diploma required * Minimum 2 years' experience in quality control * Working knowledge of Microsoft Office Suite including Word, Excel, PowerPoint and Outlook * Strong communication skills both verbal and written * Ability to multitask and prioritize work activities based upon financial impact to desired business goals * Demonstrated problem solving skills required At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work Location USA PA - Zelienople Additional Locations Work Shift

CHEMISTRY AND SCIENCE LABORATORY TECHNICIAN ANNOUNCEMENT Butler County Community College (BC3) is currently accepting applications for the position of Chemistry and Science Laboratory Technician. This is a regular part-time will begin immediately. Flexible work schedule available to support the needs of the labs. Reporting to the Coordinator of Science and Technology Labs, the Chemistry and Science Laboratory Technician at Main Campus is responsible for preparing materials and obtaining needed supplies for the Chemistry labs on Main Campus, managing the chemical stock, assisting the Coordinator of Science and Technology in managing the hazardous waste and maintaining safe working conditions, maintaining Chemistry's SDS books and list, supervising student workers while in chemistry, maintaining organization and physical and chemical cleanliness, and maintaining and arranging for the repair of equipment. In addition, the Chemistry and Science Laboratory Technician will provide needed and /or emergency coverage for Biology, when possible. The Chemistry and Science Laboratory Technician is responsible for preparing materials and obtaining needed supplies for the Cranberry campus's Chemistry, Physical Science and Biology labs, as well as, managing the chemical stock and any hazardous waste, maintaining safe working condition, maintaining all Chemical SDS books and lists, maintaining organization and physical and chemical cleanliness, and maintaining and arranging for the repair of equipment at the Cranberry campus as determined by the Coordinator of Science and Technology Labs. Bachelor's Degree from an accredited institution in Chemistry, Biology or a related field required. One year of experience in chemistry or biology laboratory work required. Must possess and maintain a valid driver's license. Hourly rate will be commensurate with qualifications and experience. Review of applications will begin immediately. Interested candidates should visit BC3 Recruitment to complete their Candidate Profile along with uploading a PDF version of current resume, cover letter, and copy of college/university transcripts that have been conferred to the Resume section. Incomplete candidate profiles and/or any materials regarding this position that are received after the application deadline or closing of the search will not be considered. Any materials submitted will be the property of the College. Applicants currently employed by Butler County Community College must authorize in writing that all college/university transcript(s) on file in their personnel file located in the Human Resources Office may be copied and attached to their application packet by the application deadline. Requests to copy transcripts received after the deadline will be denied. If you have any questions, please contact the Human Resources Office at ************ Ext. 8951 for more information. BC3 is nestled in the rolling hills of Western Pennsylvania and only 45 minutes from the cultural life of Pittsburgh. BC3 is a vibrant comprehensive community college serving eight (8) counties with six (6) locations and nearly 2,500 credit students. Built on the former Oak Hills Golf Course and a farm, BC3 has a beautiful main campus on 329 wooded acres with a central Oak Grove. BC3 employs approximately 1,000 full- and part-time employees. BC3 has 53 career and transfer programs. The College is going “all in” for its Shaffer School of Nursing and Allied Health. This includes the construction of a state-of-the-art Victor K. Phillips Nursing and Allied Health Building, program expansion, and the development of a Licensed Practical Nurse (LPN) Program. Private and public support has made this possible. BC3 offers unique programs such as Measurement Science/Metrology, Massage Therapy, Electronics, Nanofabrication Technology, and Park and Recreation Management. BC3 offers over 100 courses in online and distance education. In addition to degree programs, BC3 has a public safety training facility at its main campus that serves 15,000 students annually for business training, industrial safety training, and public safety - fire, EMS, Hazmat, and police training. The impact of BC3 as an economic engine bolsters the regional economy and continues to contribute substantially to the regional workforce. With a focus on student success, faculty, and staff describe BC3 as a special place with a caring and collegial atmosphere that is unusual in today's higher education landscape. BC3 was named the #1 community college in Pennsylvania for 2025 on Niche.com. To learn more about BC3, please visit ************ Butler County Community College is an equal opportunity, affirmative action employer.

Primary Office Location:626 Washington Place. Pittsburgh, Pennsylvania. 15219.Join our team. Make a difference - for us and for your future. Quality Control and Compliance Specialist Business Unit: Multiple Reports to: Varies Based on Assignment Position Overview: This position is primarily responsible for providing regulatory support to Direct Lending, Small Business Lending and Indirect Lending channels and to Commercial Credit. The incumbent is responsible for performing quality control and monitoring of business line controls to ensure adherence to Bank policy and regulatory requirements. Primary Responsibilities: Performs quality control and monitoring of application data, disclosures and business line processes and presents results to management. Analyzes credit decisions to monitor adherence to Fair Lending principles and Bank policy. Provides support to the Direct Loan Center, Small Business Loan Center and Indirect Loan Center and to Commercial Credit during regulatory change management and process improvement initiatives. Collaborates with Corporate Compliance and Internal Audit to address any observations and/or recommendations. Prepares other analyses as needed to Retail or Commercial executives on Retail Lending portfolios or Commercial Credit business. Performs other related duties and projects as assigned. All employees have the responsibility and the accountability to serve as risk managers for their businesses by understanding, reporting, responding to, managing and monitoring the risk they encounter daily as required by F.N.B. Corporation's risk management program. F.N.B. Corporation is committed to achieving superior levels of compliance by adhering to regulatory laws and guidelines. Compliance with regulatory laws and company procedures is a required component of all position descriptions. Minimum Level of Education Required to Perform the Primary Responsibilities of this Position: High School or GED Minimum # of Years of Job Related Experience Required to Perform the Primary Responsibilities of this Position: 3 Skills Required to Perform the Primary Responsibilities of this Position: Excellent project management skills Excellent communication skills, both written and verbal Excellent organizational, analytical and interpersonal skills Excellent customer service skills Ability to use a personal computer and job-related software MS Word - Basic Level MS Excel - Intermediate Level MS PowerPoint - Basic Level BA or BS Preferred. Experience with CRIF ACTion. Licensures/Certifications Required to Perform the Primary Responsibilities of this Position: N/A Physical Requirements or Work Conditions Beyond Traditional Office Work: N/A Equal Employment Opportunity (EEO): It is the policy of F.N.B. Corporation (FNB) and its affiliates not to discriminate against any employee or applicant for employment because of age, race, color, religion, sex, national origin, disability, veteran status or any other category protected by law. It is also the policy of FNB and its affiliates to employ and advance in employment all persons regardless of their status as individuals with disabilities or veterans, and to base all employment decisions only on valid job requirements. FNB provides all applicants and employees a discrimination and harassment free workplace.

Job Description We are adding to our Pharmaceutical Quality Control Chemistry Staff. We are currently seeking entry level individuals to: Perform analytical testing of raw material, in-process product, final product release and stability testing. Clear documentation of test activities in approved worksheets and laboratory notebooks. Execute mathematical calculations as outlined in test methods. Assess data to determine if the material tested meets specifications. Peer review of quality control data. Participate in investigational testing and assist with root cause analysis. Create and review SOP's and author Change Controls. Other general lab related duties as necessary. We are seeking individuals with: Bachelor's degree in Chemistry, Biochemistry, Biology, or related field One to two years' experience with hands on testing such as pH, titrations, determination of physical appearance, UV, IR and other wet chemistry tests. Instrumentation work with KF, HPLC, and GC, including instrumentation software a plus. Hands-on analytical chemistry experience Prior success working with regulatory, USP, GLP, GDP, and cGMP requirements. Ability to use Microsoft Suite of tools. Pharmaceutical experience a plus.