Quality control inspector jobs in Albany, GA - 22 jobs

Non-Destructive Weld Inspector A government contract requires that this position be restricted to U.S. citizens or legal permanent residents. You must provide documentation that you are a U.S. citizen or legal permanent resident to qualify. The Non-Destructive Weld Inspector will provide weld inspection and quality assurance services in support of the Marine Depot Maintenance Command (MDMC) Mission Support IDIQ contract. This position is responsible for performing non-destructive testing (NDT), quality audits, and inspections of welds, fabrications, and repairs to ensure all products meet applicable military, federal, and contractual specifications and standards. Compensation & Benefits: Estimated Starting Salary Range for Non-Destructive Weld Inspector: $35-40/HR Pay commensurate with experience. Full time benefits include Medical, Dental, Vision, 401K, and other possible benefits as provided. Benefits are subject to change with or without notice. Non-Destructive Weld Inspector Responsibilities Include: Perform comprehensive weld and fabrication inspections to verify conformity with military and federal standards across operational testing, production procedures, and processes. Exercise expert judgment to make acceptance decisions when inspection requirements are not fully defined. Conduct quality audits of production operations, processes, and procedures to ensure compliance with work orders, documented procedures, and rebuild standards. Execute visual, dimensional, functional, and operational inspections on wheeled vehicles, engineering equipment, combat/tracked vehicles, and related sub‑assemblies, components, and systems (including hydraulics, hoisting equipment, painting, and fire suppression). Research and interpret technical manuals, statements of work, rebuild standards, and inspection criteria to perform accurate inspections and audits. Verify that all repairs and production operations (machining, shaping, assembly, handling, routing, storage, etc.) are completed under controlled conditions. Prepare detailed inspection reports, document discrepancies, maintain records, and drive follow‑up corrective actions. Coordinate preparation, presentation, and communication of inspection and quality information with government stakeholders. Support and comply with MDMC's ISO 9001 Quality Management System requirements. Troubleshoot and maintain equipment used for nondestructive testing (NDT) inspections. Follow all safety requirements, including proper use of personal protective equipment (PPE). Other duties as assigned. Non-Destructive Weld Inspector Experience, Education, Skills, Abilities requested: Proven experience performing NDT and weld inspections in industrial, depot, or heavy equipment settings. Strong knowledge of military and federal specifications, quality standards, and inspection methodologies. Capable of executing and documenting quality audits and inspections across multiple production disciplines. Proficient in drafting detailed technical reports and maintaining accurate inspection records. Basic computer skills for reports, email, audits, and documentation. High attention to detail; strong analytical skills; able to work independently with minimal supervision. Able to lift up to 50 lbs. Valid state driver's license. Willing and able to work in industrial, field, and office environments. Must meet Cherokee Federal pre-employment qualifications. Certifications required: Current Level II certification in NDT methods: Magnetic Particle, Liquid Penetrant, Ultrasonic, Radiography, and Eddy Current. Fully knowledgeable in radiography safety requirements. Certified Production Inspector (CPI) certification. Ability to maintain all required certifications throughout employment. Company Information: Cherokee Nation Government Solutions (CNGS) is a part of Cherokee Federal - the division of tribally owned federal contracting companies owned by Cherokee Nation Businesses. As a trusted partner for more than 60 federal clients, Cherokee Federal LLCs are focused on building a brighter future, solving complex challenges, and serving the government's mission with compassion and heart. To learn more about CNGS, visit cherokee-federal.com. #CherokeeFederal #LI-CW2 Cherokee Federal is a military friendly employer. Veterans and active military transitioning to civilian status are encouraged to apply. Similar searchable job titles: Non-Destructive Testing Technician NDT Specialist Ultrasonic Testing Technician Certified Welding Inspector Weld Inspector Keywords: Non-Destructive Testing Weld Defect Detection Structural Weld Inspector NDT Level II Inspection Legal Disclaimer: All qualified applicants will receive consideration for employment without regard to protected veteran status, disability or any other status protected under applicable federal, state or local law. Many of our job openings require access to government buildings or military installations.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR MGZrt9Byu2

Job Description Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is a trusted partner providing single-sourced custom solutions for complex infrastructure development. With over 450 team members, TTL provides civil design, transportation design, surveying, geotechnical engineering, environmental consulting, CEI, and materials testing/inspection/observation services. At TTL, we are driven to serve our clients, our communities, and each other. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual. For more information, please go to *************** Build your legacy at TTL Construction Materials Special Inspector -Multiple Locations TTL is seeking an ICC-certified special inspector to work on projects in the Southeast. Primary duties include performing building inspections and QA/QC testing, including soils, masonry, reinforced concrete, structural steel, fireproofing, etc. Other duties include: Perform on-site observations and inspections to ensure compliance with local building codes Collect samples per project requirements and ASTM standards Perform QA/QC testing on construction materials and building components Follow proper procedures, perform accurate computations, and maintains cordial relationships with coworkers, clients, contractors, etc Requirements ICC certifications, including reinforced concrete, soils, masonry, structural steel, and fireproofing. All five certifications preferred. ACI certification 3 years' experience performing special inspections and testing Ability to communicate professionally orally and in writing. Valid driver's license and good driving record. Proficient in Microsoft Word and Microsoft Excel. Possess sufficient stamina to work in outdoor (hot & cold) environment Job Type: Full-time This position is subject to a pre-employment drug and motor vehicle record check TTL is an EEO/AAP employer

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Southern Point Staffing has a career opportunity for a Quality Control Supervisor/Manager Trainee in Albany GA A Day in the Life of a Quality Control Supervisor/Manager Trainee: This position is ideal for individuals looking to grow into a leadership role while gaining hands-on experience in quality testing and lab operations. No prior lab experience is required, as training is provided onsite. Responsibilities and Duties: Learn and oversee quality testing methods, procedures, and documentation. Perform product testing and analysis on paper products and raw materials. Maintain safety and compliance standards within the lab environment. Provide backup managerial support, including personnel oversight, scheduling, and training. Work a rotating AWS schedule (12-hour shifts, alternating between 3-4 shifts per week, including weekends and holidays). Qualifications and Experience: High school diploma or GED (or relevant experience/training). Strong organizational and leadership abilities. Ability to analyze data, maintain records, and oversee compliance processes. Proficiency in Microsoft Office (Word, Excel) and the ability to learn custom input systems. Strong verbal and written communication skills. Must pass a background check and drug test. Schedule and Compensation: Pay Range: $17-$20/hr Schedule: Alternating day/night shifts, which may change frequently based on business needs. Overtime Available: Some shifts may require additional hours. Work Environment: Standing for extended periods and a 5-10 minute walk from the parking lot to the work area. Safety Gear: Steel-toed work shoes required. Holiday Work: Must be available to work most holidays if scheduled. Benefits: SPS offers supplemental health insurance to employees while on assignment. SPS is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES * Works in a safe manner following all safety policies while performing job duties. * Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. * Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. * Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. * Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. * Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. * Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. * Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. * Assists in maintaining and keeping tools, machinery, and work area clean and organized. * Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS * Must be 18 years of age. * This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. * High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. * Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. * Bilingual Spanish preferred. * Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. * Excellent written and oral communication skills required. * Ability to handle multiple projects while maintaining attention to detail. * Ability to work in a team, to be trained, and take direction. * Flexible to work in a fast paced, changing environment. * Not afraid to get dirty and handle tools/equipment daily. * Must be able to pass a pre-employment drug screen.

Job Title: LAB TECHNICIAN Employment Status: Regular FLSA Status: Non - Exempt Department: Quality Control QC Lab Supervisor Summary Description: Supports the operation of the lab and performs tests and analyses as requested. Maintain documentation on all tests and evaluations. Essential Functions: Chemical (Spectro) Analyses: furnace, ladle, casting, and incoming scrap. Graphite Check: Nodularity of poured samples and microstructure etching. Sand Testing: support for core making and molding processes; Sand strength, compatibility, clay and moisture content, LOI, screen analyses. ● Routine maintenance and cleaning of test equipment and lab facilities. Test Bars: collection, cutting, Hardness testing, and prepare for pick-up. Defect Analyses: obtain material, sectioning, microstructural preparation, and review. Customer Profiles: prepare for testing, send to outside testing sites, chemical analyses, Hardness testing, microstructural preparation, and review. File and maintain production records for coremaking, molding, pouring and cleaning departments. Perform any and all other job related tasks as assigned Skills or Experience Required: High school diploma. Willing to follow all safety criteria. Some computer experience required. Ability to follow written instructions. Capable of learning to operate process and testing equipment. Other Position Demands or Requirements: Perform technical services and analysis. Disclaimer: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a particular job. It is intended only to be a general description of the essential functions common to positions of this type. 5:00am - 3pm Monday through Friday

We Deliver the Goods: * Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more * Growth opportunities performing essential work to support America's food distribution system * Safe and inclusive working environment, including culture of rewards, recognition, and respect Position Summary: This role is from 5:00am to 2:00pm. Monday - Friday Responsible for checking quality of designated product and taking daily inventory on produce. Removes spoiled product that is short-dated from inventory and repacking full cases into smaller quantities. Responsible for quality check of all produce pick locations. Pulls for dump or salvage any produce with decay or otherwise not meeting shipping requirements. Reports any dumps or salvage to Inventory Control. Communicates and interacts with customers, vendors and co-workers professionally ensuring questions are answered accurately and in a timely manner. Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company. Position Responsibilities: * Perform assigned duties efficiently to reduce spoilage and contribute positively to profit margin; working closely with the cooler Receiving Department on perishable items. * Communicate and interact with customers (and company personnel) and vendors in a friendly, timely and quality manner; ensure customers' and vendors' questions are answered accurately and in a timely manner. * Determine quality of products returned by customers; work with Returns Clerk on returned produce quality. * Check quality of produce and ensure: poor quality product is removed before a customer can purchase; proper rotation and quality of product on a daily basis. * Break / repack full cases to small cases.in the most timely and efficient manner as to reduce spoilage and lost inventory. * Check for dating issue on designated products on a daily basis. Remove any short dated and bad product from inventory. * Keep inventory counts current. * Perform other related duties as assigned. EEO Statement Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement. Required Qualifications High School Diploma/GED or Equivalent Experience 6-12 months Procurement, warehouse and / or administrative experience in related area Preferred Qualifications High School Diploma/GED or Equivalent Experience 1- 2 years Procurement, warehouse and / or administrative experience in related area within foodservice industry OSHA Forklift Operator certification

With our Customers, we Listen. Learn. Deliver. Guided by the values of the company, the Laboratory Supervisor is responsible for overseeing all aspects of laboratory operations including staff leadership, safety and quality compliance, analytical processes, and continuous improvement initiatives. This role is based in Tifton, GA and serves as a technical liaison supporting internal teams and external customers. Our People Promise No Nonsense - We are bold and direct High Touch - It's business and it's personal Informal - We are approachable at all levels Take Initiative - We are free to explore Can Do - We believe anything is possible Position Summary The Laboratory Supervisor is responsible for overseeing all aspects of laboratory operations, ensuring compliance with safety and quality standards, and driving continuous improvement in processes and performance. This role manages laboratory staff, equipment, and resources while serving as a technical liaison to internal teams and external customers. Core Responsibilities Safety & Compliance * Actively participate in the ADAMA Central Safety Committee and maintain a strong safety culture. * Ensure compliance with all safety, quality, and regulatory requirements. Laboratory Operations & Quality Management * Develop, implement, and maintain SOPs, Work Instructions, and analytical procedures. * Monitor laboratory productivity and efficiency, adjusting staffing and processes as needed. * Oversee quality assurance programs, proficiency surveys, and QC data review. Equipment & Inventory Management * Ensure optimal performance of laboratory instruments through preventive maintenance and troubleshooting. * Manage equipment service, repair, and replacement quotes. * Maintain inventory of laboratory supplies, monitor budget, and negotiate vendor pricing. Method Development & Continuous Improvement * Implement new programs, tests, and methods. * Research and evaluate alternative technologies and equipment. * Lead accelerated stability testing and round-robin studies. Customer & Cross-Functional Collaboration * Serve as a technical liaison to customers, providing accurate information and resolving issues. * Collaborate with other departments and supervisors to improve processes and resolve problems. Leadership & Staff Development * Recruit, train, and develop laboratory staff. * Schedule and assign work, monitor performance, and hold staff accountable. * Counsel, discipline, and appraise employees to maintain high performance standards. Required Skills & Qualifications * Education: Bachelor's degree in Chemistry, Biology, or related field preferred * Experience: Minimum 5 years in a laboratory environment, with 2+ years in a supervisory role. * Technical Expertise: Strong knowledge of analytical chemistry, laboratory methods, and instrumentation. * Safety & Compliance: Deep understanding of safety protocols and regulatory requirements. * Leadership: Proven ability to lead teams, coach employees, and manage performance. * Problem-Solving: Skilled in troubleshooting and process improvement. * Communication: Excellent verbal and written communication skills. * Project Management: Ability to prioritize tasks and manage timelines effectively. * Budget Management: Competence in managing budgets and vendor negotiations. * Adaptability: Willingness to research and adopt new technologies and methods.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. The team at our Ashburn Ga Location is seeking to add a Quality Control team member. This is an non-exempt level position. Schedule: 12 hour/rotating swing shift (You will work days and nights and some weekends/holidays and will get a schedule ahead of time so that you can plan around your shift) Pay: $16.50 hourly and an additional $1.50 shift differential when on nights We care about our people. Here are some things we do to show it: Benefits start on your FIRST day (Medical (BCBS), Dental, Vision, 401k with 6% match, and Life Insurance) Weekly Pay Paid Holidays Advancement Opportunities Paid Vacation/Sick time Tuition Reimbursement Maternity/Paternity leave Health and Wellness Incentives 401K/ESOP, pension with ADM matching contributions Flexible Spending Accounts (FSAs) Short & Long-Term Disability Company Paid Life Insurance and Voluntary Life Insurance for Employees,' Spouse and Children Parental leave (paternity/maternity) Employee Assistance Program (EAP) Tuition Reimbursement Perks at work (discount program with several companies) Position Summary: Under limited supervision, collect, analyze and document grade results on various sizes and types of peanuts in a safe, effective and efficient manner Job Responsibilities: Perform quality checks in basis peanut processing rules and customer specifications. Conducts job tasks with a positive, safe attitude and maintains a safe work record. Maintain a good attendance record. Work rotating shifts of various lengths including weekends and holidays Maintains good communication with all plant personnel. (Other shifts, departments and managers) Maintain production rates Ability to understand and perform assigned job tasks easily and independently while flexible enough to work in team settings. Maintains good housekeeping and completes sanitation duties and paperwork as required. Conducts daily inspections, reporting any problems noted. Perform maintenance and sanitation on machines as required May perform other duties as assigned. What we are looking for from you: A positive attitude and team mindset A desire to learn various operations and grow with the company Focus on Safety- Commitment to ADM's goal of achieving a zero-injury culture: to understand and follow all company safety procedure and use of PPE Ability to understand and effectively communicate in English (verbal/written) The ability to lift 50lbs A high school diploma or GED That you are at least 18 years of age or older The ability to work 12 hour rotating shift that includes days and nights, some weekends and holidays That you maintain excellent attendance (being on time, working when scheduled, staying until your shift ends) Demonstrates the ability to be observant and to address concerns that may arise The ability to work above ground level on grated flooring and climb stairs/ladders *Please make sure to include your updated resume or work history in your application. Without this you will not be able to be considered. * The site requires ankle supporting height (no tennis shoes) steel toe boots. ADM requires the successful completion of a background check. Base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. Hourly and salaried non-exempt employees will also be paid overtime pay when working qualifying overtime hours. If hired, employees will be in an “at-will position” and the Company reserves the right to modify base pay (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors. The pay for this position is expected to be: $16.50 hourly with $1.50 shift differential when on nights

Quality Control Tech: The QC Tech works in a production setting ensuring product quality at various stages of processing. Testing product samples is performed using various types of lab equipment. The ability to multi-task and complete testing in a timely manner is essential in order to expedite production. Our QC Tech "Pay for Skills Program" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level. To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour. This position is bonus eligible. Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: 401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Quality Control Tech: The QC Tech works in a production setting ensuring product quality at various stages of processing. Testing product samples is performed using various types of lab equipment. The ability to multi-task and complete testing in a timely manner is essential in order to expedite production. Our QC Tech "Pay for Skills Program" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level. To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour. This position is bonus eligible. Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: 401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

We are seeking a detail-oriented and proactive Quality Control Specialist to join our production team. In this role, you will be responsible for ensuring that quality standards are met and maintained throughout all phases of the manufacturing process, from raw materials to the final product. You will work closely with production, engineering, and management teams to maintain compliance, minimize defects, and uphold product integrity. If you have a strong eye for detail, a commitment to continuous improvement, and experience in a production or manufacturing environment, we want to hear from you! ________________________________________ Key Responsibilities: Conduct in-process inspections and final product quality checks to ensure compliance with internal standards and customer specifications. Monitor production processes to identify quality control issues, non-conformances, and areas for improvement. Perform routine testing and measurement of materials and finished goods using calibrated tools and equipment. Document and report inspection findings, maintain detailed records, and support traceability requirements. Collaborate with production supervisors and team leads to resolve quality-related issues in real-time. Assist in the development and implementation of quality assurance procedures, SOPs, and process improvements. Support root cause analysis and corrective/preventive action (CAPA) processes. Ensure compliance with ISO standards, regulatory guidelines, and company quality policies. Participate in internal audits, training, and cross-functional quality improvement initiatives.

Title: Quality Control Technician (7p-7a) Department: Quality Control Reports To: Quality Control Supervisor The Quality Control Technician supports Oil-Dri Corporation of America (ODCA) strategic mission, vision, and the WE CARE values by: utilizing quality initiatives associated with ODCA's business goals, supporting teammates (e.g. processing, packaging, product development, etc.) by applying inspection and test methods to determine product conformance, and utilizing quality control (QC) principles to optimize manufacturing operations and ensuring products meet customer requirements. Job Duties Performs specific analytical tests, such as but not limited to particle size distribution, acid essay, titrations, pH, and wavelength scans on products and raw materials to measure conformance to specifications. Understands data and acts as needed, i.e. interprets test results, evaluates processes, and other electronic media communicating with processing, warehouse and packaging teammates to ensure that necessary adjustments are made to keep products/packages conforming to specifications, and places non-conforming finished goods on hold. Communicates and works with production leadership to investigate and resolve problems. Prepares and manages correspondence, reports and documents in a legible and comprehensible manner. Maintains equipment, assuring that it is functional and appropriately calibrated. Enters work requests as needed. Enters calibration results as required by QMS. Assists and supports the QC Analytical Lab Technicians where needed. This includes items such as ISO, FAMI-QS, HACCP, and other related requirements (plant dependent). Interacts with the document control system as needed Observes all safety rules, regulations and precautions. Audits external processes and/or verifies internal processes for conformance to current SOP's, PWI's, etc. Keep areas clean and free of clutter. Other duties as assigned. Support & participate in improvement activities, e.g., 8 D, kaizen, visual @ glance, 5 S, shift review and daily review processes, process mapping etc. Preferred Qualifications Education: High school diploma, or post-secondary education Licensure/Certification: Work Experience: Must possess two years of experience working in quality control Must understand process controls and SPC rules. Must be able to read, comprehend, and act on product specifications, SOP's (standard operating procedures), PWI (Process Work Instructions), AIQ processes, and similar documents. Training: Must meet the assessment requirements for this position. Must pass basic computer literacy skills assessment Must obtain the CQIA certification (Quality Improvement Associate Certificate-through the ASQ Org) within six months of hire. Knowledge/Skills/Abilities: Strong problem identification and problem resolution skills. Communicates affectively verbally and in writing as appropriate for the needs of the audience. Must be able to work with others as necessary to better enable customer and ODCA satisfaction on situations impacting or involving quality (e.g., NJIC teammates, suppliers, customers, etc.). Able to work with minimal supervision. Must understand all safety requirements and other communications. Must be able to lift up to 50 pounds. Must be able to bend, reach, twist, stoop, walk, and climbing stairways. Must be able to work in dusty, hot, cold and humid environments. Must be able to communicate by radio and phone. When necessary, must be able to stand for the duration of the shift Must be able to work shifts. Must be able to participate in cleanup activities up to full shift duration. Must meet all physical requirements of the position. Hire Rate: $21.87

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR j5ihItxYx5

ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

**We Deliver the Goods:** + Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more + Growth opportunities performing essential work to support America's food distribution system + Safe and inclusive working environment, including culture of rewards, recognition, and respect **Position Summary:** **This role is from 5:00am to 2:00pm. Monday - Friday** Responsible for checking quality of designated product and taking daily inventory on produce. Removes spoiled product that is short-dated from inventory and repacking full cases into smaller quantities. Responsible for quality check of all produce pick locations. Pulls for dump or salvage any produce with decay or otherwise not meeting shipping requirements. Reports any dumps or salvage to Inventory Control. Communicates and interacts with customers, vendors and co-workers professionally ensuring questions are answered accurately and in a timely manner. Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company. **Position Responsibilities:** + Perform assigned duties efficiently to reduce spoilage and contribute positively to profit margin; working closely with the cooler Receiving Department on perishable items. + Communicate and interact with customers (and company personnel) and vendors in a friendly, timely and quality manner; ensure customers' and vendors' questions are answered accurately and in a timely manner. + Determine quality of products returned by customers; work with Returns Clerk on returned produce quality. + Check quality of produce and ensure: poor quality product is removed before a customer can purchase; proper rotation and quality of product on a daily basis. + Break / repack full cases to small cases.in the most timely and efficient manner as to reduce spoilage and lost inventory. + Check for dating issue on designated products on a daily basis. Remove any short dated and bad product from inventory. + Keep inventory counts current. + Perform other related duties as assigned. **Req Number:** 135651BR **Address Line 1:** 211 Alton Hall Road **Job Location:** Cairo, Georgia (GA) **Shift:** 1st Shift **Full Time / Part Time:** Full Time **EEO Statement:** Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy (*********************** ; (2) the "EEO is the Law" poster (*********************** and supplement (*************************** ; and (3) the Pay Transparency Policy Statement (******************************** . **Required Qualifications:** High School Diploma/GED or Equivalent Experience 6-12 months Procurement, warehouse and / or administrative experience in related area **Division:** Performance Foodservice **Preferred Qualifications:** High School Diploma/GED or Equivalent Experience 1- 2 years Procurement, warehouse and / or administrative experience in related area within foodservice industry OSHA Forklift Operator certification **State:** Georgia **Company Description:** Performance Foodservice, PFG's broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers - providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams. **Benefits:** Click Here for Benefits Information (***************************************

Title: Quality Control Technician (7p-7a) Department: Quality Control Reports To: Quality Control Supervisor The Quality Control Technician supports Oil-Dri Corporation of America (ODCA) strategic mission, vision, and the WE CARE values by: utilizing quality initiatives associated with ODCA's business goals, supporting teammates (e.g. processing, packaging, product development, etc.) by applying inspection and test methods to determine product conformance, and utilizing quality control (QC) principles to optimize manufacturing operations and ensuring products meet customer requirements. Job Duties Performs specific analytical tests, such as but not limited to particle size distribution, acid essay, titrations, pH, and wavelength scans on products and raw materials to measure conformance to specifications. Understands data and acts as needed, i.e. interprets test results, evaluates processes, and other electronic media communicating with processing, warehouse and packaging teammates to ensure that necessary adjustments are made to keep products/packages conforming to specifications, and places non-conforming finished goods on hold. Communicates and works with production leadership to investigate and resolve problems. Prepares and manages correspondence, reports and documents in a legible and comprehensible manner. Maintains equipment, assuring that it is functional and appropriately calibrated. Enters work requests as needed. Enters calibration results as required by QMS. Assists and supports the QC Analytical Lab Technicians where needed. This includes items such as ISO, FAMI-QS, HACCP, and other related requirements (plant dependent). Interacts with the document control system as needed Observes all safety rules, regulations and precautions. Audits external processes and/or verifies internal processes for conformance to current SOP's, PWI's, etc. Keep areas clean and free of clutter. Other duties as assigned. Support & participate in improvement activities, e.g., 8 D, kaizen, visual @ glance, 5 S, shift review and daily review processes, process mapping etc. Preferred Qualifications Education: High school diploma, or post-secondary education Licensure/Certification: Work Experience: Must possess two years of experience working in quality control Must understand process controls and SPC rules. Must be able to read, comprehend, and act on product specifications, SOP's (standard operating procedures), PWI (Process Work Instructions), AIQ processes, and similar documents. Training: Must meet the assessment requirements for this position. Must pass basic computer literacy skills assessment Must obtain the CQIA certification (Quality Improvement Associate Certificate-through the ASQ Org) within six months of hire. Knowledge/Skills/Abilities: Strong problem identification and problem resolution skills. Communicates affectively verbally and in writing as appropriate for the needs of the audience. Must be able to work with others as necessary to better enable customer and ODCA satisfaction on situations impacting or involving quality (e.g., NJIC teammates, suppliers, customers, etc.). Able to work with minimal supervision. Must understand all safety requirements and other communications. Must be able to lift up to 50 pounds. Must be able to bend, reach, twist, stoop, walk, and climbing stairways. Must be able to work in dusty, hot, cold and humid environments. Must be able to communicate by radio and phone. When necessary, must be able to stand for the duration of the shift Must be able to work shifts. Must be able to participate in cleanup activities up to full shift duration. Must meet all physical requirements of the position. Hire Rate: $21.87