Quality control inspector jobs in Arizona

The Power Quality Technician is responsible for monitoring, analyzing, and optimizing the quality of electrical power in commercial and industrial environments. This technician ensures that electrical systems operate efficiently, safely, and in full compliance with applicable standards and regulations. Key responsibilities include identifying and resolving issues such as voltage fluctuations, harmonic distortion, transients, and power surges that can compromise the performance or lifespan of electrical equipment. Responsibilities Perform primary injection, insulation, and contact resistance on low voltage circuit breakers. Adjust circuit breaker settings based on customer needs. Troubleshoot air leaks in equipment and facilities. Conduct infrared thermography inspections on electrical equipment. Detect partial discharge on live electrical equipment. Conduct electrical load studies for customers for them to accurately track power usage. Install power monitors to find electrical mishaps or power quality issues. Perform panel assessment to map circuits for potential shutdowns. Execute electrical equipment field audits. Perform electrical QA/QC using NEC code, City requirements, and customer specification. Confirm that installations match drawings and documents. Document and report installation deficiencies found in the field. Work with Contractors, General Contractors, system owners, and Authority Having Jurisdiction to resolve quality issues. Review and audit electrical testing documentation. Attend all associated coordination/planning/reporting/construction meetings. Prioritize, organize, and execute work scope in a timely fashion. Engage in personal, professional, and business development opportunities. Respond to the direction of management. Perform other duties as assigned. Skills & Qualifications Certification or degree in electrical engineering, electrical technology, or a related field. 2-5 years of experience in power quality analysis and electrical maintenance. Proficiency in using power quality analyzers, oscilloscopes, and other electrical testing equipment. Familiarity with power systems, electrical schematics, and control systems. Knowledge of industry standards such as NEC, IEC, NFPA or related to power quality. Strong analytical skills to diagnose and address power quality issues. Ability to document and communicate technical findings clearly to various stakeholders. Familiarity with power distribution systems and control systems. Knowledge of energy efficiency and sustainability practices in electrical systems.

The QC-C Inspector monitors shop production for fit-up and welding of structural steel members and parts under the direct supervision of QC-B and -A inspectors. They are responsible for the implementation of the SME Industries Quality Control program and all Company standards. Inspectors need a good understanding of the codes and standards of the industry and SME's manufacturing system. The Inspector must be familiar with the inspection and welding processes as used in the industrial and commercial industry. ABOUT US: Southwest Steel is a steel fabrication and erection company that specializes in miscellaneous metal, steel stairs, railings, structural steel, and creatively unique custom steel pieces to complete projects from standard building needs to anything imaginable. Visit ********************** to learn more. Southwest Steel is a division of SME Industries, Inc. Why Join Us? Health and Wellness Benefits including Medical, Dental, Vision, Short Term Disability and Life Insurance. Financial Benefits including competitive compensation and 401(k) plan. Additional Benefits including Paid Holidays and Paid Time Off, Employee Assistance Program, and more. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform assigned duties within the requirements of the Project specifications, codes and standards as defined in contract documents and Company Quality Management system. Learn to review drawings for accuracy and provide interpretation for production personnel where needed through the fabrication process. Assist in monitoring welding and inspection equipment for compliance, ensure personnel are qualified and certified to operate the equipment. Assist in the performance of 100% visual welding inspection for weld quality, size and location. Provide dimensional verifications of fabricated members, as time allows, for compliance with industry standards. Learn the appropriate documentation for these inspections, testing and qualifications. Assist in completing Non-conformance reports and follow up on corrective actions. Assist in the performance of non-destructive testing of welds and materials. Study and keep current with new editions of the codes and standards. Perform duties in a timely manner to ensure contract scheduling issues. Maintaining inspection and test equipment in proper order, ensure equipment is properly calibrated for the work performed. Keep work area orderly and clean. Comply with the code of ethics for Inspectors as provided by the American Welding Society. Perform additional assignments as directed by the QA Supervisor. QUALIFICATIONS: Must be able to perform each essential duty daily. High School diploma, GED or equivalent, and 2 years of previous welding or Quality Control experience or similar trade school. Must be dependable, reliable, and mature enough to handle equipment in a safe and sensible manner. Ability to do simple math and/or algebraic formulas as deemed necessary by work type. The ability to understand the working mechanism of tools and machinery under their responsibility. Ability to communicate equipment problems, production quality numbers, and quality issues with proper individuals. Attend to detail; ability to communicate verbally and in writing, if necessary, with subordinates, co-workers, maintenance, supervisors and inspectors. Inspector in training or one holding a single in-hour certification. PHYSICAL DEMANDS: Must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis in conjunction with the official Company doctor and clinic. Ability to lift and carry up to 50 pounds regularly and up to 65 pounds occasionally. Must be able to stand, kneel, bend, twist, and reach for extended periods and work from scaffolding and/or ladders as required. Physically fit to work in an industrial environment and tolerate exposure to varying physical conditions. Must be able to work extended hours when necessary. Manual dexterity and hand-eye coordination to operate tools, equipment, and safety devices. Tolerance to loud noises, vibrations, dust, heat, and fumes within a fabrication shop environment. Ability to wear required PPE (Personal Protective Equipment) includes safety glasses, gloves, steel-toed boots, high visibility clothing, and hearing protection. WORK ENVIRONMENT: Industrial warehouse and manufacturing environment with heavy machinery, and overhead cranes. Strict adherence to safety procedures and use of PPE is always mandatory. Frequent interaction with production staff, supervisors, safety personnel, and quality control teams. Exposure to hot and cold temperatures, depending on seasonal conditions. Position Responsibilities:This job posting reflects the current assignment of essential functions and is not meant to be all-inclusive. Duties and responsibilities may be assigned or reassigned to this position at any time. Equal Employment Opportunity: SME Industries, Inc. and its divisions (SME Steel Contractors, Southwest Steel, CoreBrace, DuraFuse, and SME Logistics) is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Employment Authorization: Applicants must be legally authorized to work in the United States without the need for employer-sponsored work authorization now or in the future. Proof of eligibility will be required upon hire.

JOB TITLE: Quality Inspector PAY RATE: $31-39/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (4+ months with potential for extension) Shifts: Must be open to various shifts (4x10 Mon-Thurs 6:00am-4:30pm or 4:00pm-2:30am; 3rd shift Thurs-Sun) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Perform in-process and final assembly inspections per QMS requirements. Accurately document inspection results and input data. Communicate acceptance criteria and results to engineering, management, and production teams. Generate Non-Conformance Reports (NCRs) in Oracle ERP. Ensure compliance with safety and quality standards. Requirements: High school diploma or GED required. A&P License required. 3-5 years of quality inspection experience in aerospace/manufacturing. Knowledge of AS9100 and FAA/aviation industry requirements. Strong background in aircraft mechanical and pneumatic systems, integration, and inspection techniques. Proficient with precision measurement tools, Microsoft Office, CATIA V5 (or similar), and interpreting 2D/3D drawings. Excellent attention to detail, technical writing, and communication skills. Ability to lift up to 35 lbs and meet required vision standards. Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! #jobad

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

What we do: Paragon develops and produces innovative solutions for the most demanding life support and thermal control challenges in the space and defense markets. Whether it is deep space, low earth orbit, undersea, or on the ground, our systems and hardware provides safe and comfortable environments for astronauts, explorers, military personnel, and unmanned space and terrestrial vehicles. Summary of Position: As a Quality Inspector, you will work hands-on in a production setting and utilize lean manufacturing concepts to assess products, processes, mechanical, electro-mechanical, and bio-tech systems. Inspect product from production, suppliers, or other Paragon sites to validate workmanship, measured dimensions and Quality System documentation that conforms to product requirements. Accountable ownership to the non-conforming documentation process for hardware that does not meet product specifications or compliance requirements Facilitate the disposition of parts non-conforming to inspection plans or program requirements Support other areas of Quality as required Required skills: Ability to interpret product specifications, GD&T measurement requirements to drawings/blueprints and engineering documents Able to use calibrated inspection and precision measurement equipment to validate dimensions or features Basic Computer/MS Office skills Effective written and communication skills Work independently/self-motivated, with the ability to collaborate as part of a functional team Strong understanding of Geometric-Dimensioning & Tolerancing specification ASME Y14.5 Preference is 5 years minimum of aerospace inspection experience, certification to an industry standard is an acceptable equivalent Familiarity with AS9100 standards and practices Application of Critical thinking, practical problem solving and Root Cause Analysis skills Capable of working in a fast-paced and collaborative environment Desired Skills: Knowledge of SAP or other ERP software PCDMIS experience Ability to program ROMER ARM CMM utilizing PCDMIS Experience working in aerospace, spacecraft, or missile production Specific aerospace inspection, control of nonconformity and First Article Inspection Familiarity or certification to American Society of Quality standards

Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector II. *Sign-On Bonus* Purpose & Scope Inspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with the Sargent quality standards. Roles & Responsibilities: Promote Safety to all team members, Customers and Suppliers. Perform, in-process and final inspections for machine shop and production product. Perform receiving inspection on incoming product. Performs dimensional inspection using calipers, micrometers, bore gages, height gages, and more complex tools as required. Interpret drawings, certifications, and military/industry specifications. Create and complete first articles to AS9102. Trains and mentors less experienced inspectors. Performs other duties as assigned. Required Education, Skills & Experience: High School Diploma or GED. Experience in an ISO9001/AS9100 manufacturing environment. A minimum of 4 years of experience in a manufacturing environment with demonstrated mechanical inspection background. Basic measurement skills using micrometers, calipers, height gages, bore gages and optical comparators. Basic GD&T understanding. Ability to read and interpret drawings and specifications. Must possess basic math skills and have good reading comprehension. Basic computer skills. Proficient with applicable computer programs, including Microsoft Excel, Word and Outlook. Must be able to make decisions, communicate effectively and work with others. Must be a team player, self-starter, problem solver and adaptable. Must be a U.S. citizen. Preferred Job Knowledge, Skills & Experience: Continued education (College Course Work, Technical Studies, Seminar Completion). 6 years of Quality Assurance experience in and ISO9001/AS9100 manufacturing environment. A general knowledge of applicable QMS standards, including ISO9001 and AS9100. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent's continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company's commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: Competitive Compensation Bonus platforms Holidays/Vacation/Sick Time 401k Savings & Investment Plan Tuition Reimbursement Medical/Dental/Vision Plans HSA/FSA Life & Disability Insurance Accident/Hospital/Critical Care Plans Pet Insurance Gym & Rideshare Incentives Legal Insurance/Identity Theft Flexible Schedules 3 & 4-day work week ½ day Fridays Dedication to our core values. Our must haves… Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions. Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect. Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction. Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed. Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail. Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Consultant Engineering, Inc. (CEI) is an Arizona owned and operated professional engineering firm headquartered in Phoenix, Arizona with additional offices in Tucson and Gilbert, Arizona. As one of the Southwest's largest construction management firms, we also provide professional right of way (appraisals, acquisition and relocation services) and land surveying services. CEI offers competitive compensation and a comprehensive benefits package (medical, dental, vision, 401(k), life and AD&D insurance, disability insurance, paid holidays and PTO). CEI is hiring a Construction Inspector with experience in Water/Waste Water facilities construction. Job Requirements This position will be based in Yuma, Az. and will provide construction oversight/inspection of civil water/wastewater facility improvements. Inspector will provide daily onsite observations of construction according to plans and specs. Inspection experience in the following: Construction of water/wastewater collection/distribution facilities Utilities, pipelines, drainage facilities, roadways Document on daily diaries, maintaining all inspections, reports and quality of work. Attend construction meetings with city and contractor. Position will be in the Yuma, Arizona area. CEI has additional inspector work in Phoenix and the state of Arizona. ACI, ATTI certs are required. This job description is not intended to be exhaustive of all duties and responsibilities. Employees are accountable for all duties within the role of this job and may also perform additional responsibilities as needed. Our company complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process or to perform essential job duties, please contact our HR Dept.

As a Level 3 Inspector here at Honeywell, you will play a crucial role in ensuring the quality and compliance of our products. You will be responsible for conducting inspections, tests, and audits to verify that our products meet the required standards and specifications. Your attention to detail and commitment to excellence will contribute to the overall success of our manufacturing operations. You will report directly to one of our ISC Production Supervisors and you'll work on site in our Tempe, Arizona plant. In this role, you will have a direct impact on the quality and reliability of our products, ensuring that they meet the highest standards of performance and safety. * Conduct inspections, tests, and audits to verify product quality and compliance * Identify and document any non-conformities or deviations from standards * Collaborate with cross-functional teams to address quality issues and implement corrective actions * Maintain accurate records and documentation of inspection results * Continuously monitor and improve the effectiveness of quality control processes KEY RESPONSIBILITIES * Conduct inspections, tests, and audits to verify product quality and compliance * Identify and document any non-conformities or deviations from standards * Collaborate with cross-functional teams to address quality issues and implement corrective actions * Maintain accurate records and documentation of inspection results * Continuously monitor and improve the effectiveness of quality control processes BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes: * Employer subsidized Medical, Dental, Vision, and Life Insurance * Short-Term and Long-Term Disability * 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance * Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posted on October 15, 2025. YOU MUST HAVE * Prior experience in quality control or inspection role * Strong knowledge of quality control principles and practices * Attention to detail and ability to identify non-conformities or deviations * Excellent communication and documentation skills WE VALUE * High school diploma or equivalent * Prior aerospace experience in a manufacturing or production environment * Knowledge of industry standards and regulations * Certification in quality control or inspection

As a Level 3 Inspector here at Honeywell, you will play a crucial role in ensuring the quality and compliance of our products. You will be responsible for conducting inspections, tests, and audits to verify that our products meet the required standards and specifications. Your attention to detail and commitment to excellence will contribute to the overall success of our manufacturing operations. You will report directly to one of our ISC Production Supervisors and you'll work on site in our Tempe, Arizona plant. In this role, you will have a direct impact on the quality and reliability of our products, ensuring that they meet the highest standards of performance and safety. KEY RESPONSIBILITIES • Conduct inspections, tests, and audits to verify product quality and compliance • Identify and document any non-conformities or deviations from standards • Collaborate with cross-functional teams to address quality issues and implement corrective actions • Maintain accurate records and documentation of inspection results • Continuously monitor and improve the effectiveness of quality control processes BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes: Employer subsidized Medical, Dental, Vision, and Life Insurance Short-Term and Long-Term Disability 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posted on October 15, 2025. YOU MUST HAVE • Prior experience in quality control or inspection role • Strong knowledge of quality control principles and practices • Attention to detail and ability to identify non-conformities or deviations • Excellent communication and documentation skills WE VALUE • High school diploma or equivalent • Prior aerospace experience in a manufacturing or production environment • Knowledge of industry standards and regulations • Certification in quality control or inspection • Conduct inspections, tests, and audits to verify product quality and compliance • Identify and document any non-conformities or deviations from standards • Collaborate with cross-functional teams to address quality issues and implement corrective actions • Maintain accurate records and documentation of inspection results • Continuously monitor and improve the effectiveness of quality control processes

Full-time Description Cutter Aviation is seeking a highly skilled and detail-oriented Quality Control / Floor Inspector to join our FAA Part 145 Repair Station team in Phoenix, AZ. This position is responsible for ensuring that all maintenance, repairs, and alterations meet the highest standards of safety and compliance with FAA regulations. The selected candidate will perform inspections in accordance with Title 14 CFR Part 65, §121.371, §135.429, §145.155, and §145.157, verifying that all work performed meets applicable regulatory requirements, manufacturer specifications, and Cutter Aviation's quality standards. This role holds the authority to approve articles for return to service in full compliance with FAA regulations. Key Duties and Responsibilities: Perform inspections of aircraft, engines, components, and parts in accordance with FAA regulations, manufacturer maintenance manuals, and Cutter Aviation procedures. Conduct receiving, in-process, and final inspections, ensuring compliance with Title 14 CFR Part 145 and applicable quality standards. Approve or reject articles for return to service in accordance with §145.157 and company-issued authorizations. Ensure compliance with the personnel qualification requirements of §121.371, §135.429, and §145.155. Document all inspection findings accurately and completely in approved maintenance records. Verify the use of correct technical data, tools, and calibrated equipment during maintenance activities. Coordinate with maintenance personnel to resolve discrepancies in a timely and compliant manner. Maintain compliance with all safety policies, quality standards, and applicable FAA regulations. Assist in internal audits, quality investigations, and corrective action implementation. Maintain current knowledge of FAA regulations, Airworthiness Directives (ADs), and OEM service instructions. Requirements Qualifications: Must meet the eligibility requirements of Title 14 CFR Part 65 for Mechanics with Airframe and/or Powerplant ratings. Must comply with the requirements of §145.155 for inspection personnel. Must meet the requirements of §145.157 to be authorized to approve an article for return to service. Must meet the inspection personnel qualification requirements of §121.371 and §135.429, as applicable. Strong understanding of FAA regulations, technical data, and quality control processes. Proficient in reading and interpreting engineering drawings, maintenance manuals, and inspection procedures. Experience: Minimum of three (3) years of aircraft maintenance and/or inspection experience in a Part 145 Repair Station, Part 121 or Part 135 operation, or equivalent military/civil aviation environment. Experience performing receiving, in-process, and final inspections on aircraft, engines, and/or components. Prior authorization for return-to-service approvals is preferred. Education: High school diploma or equivalent required. FAA Airframe and Powerplant (A&P) Certificate required. Additional manufacturer or inspection authorization training is highly desirable (i.e., FAA Inspector Authorization (IA)). Additional Requirements: Must successfully pass an initial drug screening and be subject to random testing in accordance with company policy and applicable regulations. Must successfully pass a background check. Must possess and maintain a valid driver's license with a clean driving record. Must be able to occasionally lift and carry items weighing up to 35 pounds. Must be able to sit, stand, kneel, and climb ladders as required to perform inspection duties. Must report to work on time and be prepared to perform assigned tasks. Must maintain reliable transportation to and from the worksite. Must demonstrate professionalism, cooperation, and a positive attitude when interacting with colleagues, management, and customers. Must consistently exhibit reliability, accountability, and follow-through in completing assigned responsibilities. Must maintain a high level of attention to detail and accuracy in all work performed. Must be able to accept constructive feedback and remain composed and effective under high-pressure conditions. Must demonstrate flexibility in assuming new responsibilities, adapting to procedural changes, and meeting operational challenges. Must be able to work independently with minimal supervision while ensuring compliance with all Repair Station policies, procedures, and regulatory requirements. Must be able to work weekends as needed. Some travel required.

SEGULA TECHNOLOGIES is hiring Quality Control Inspector to join our growing team in: Tucson , AZ We offer a competitive salary and benefits plan, and great opportunities for career growth! Direct Contract Flexible Spending Acounts Domestic Partner Coverage Health Savings Accounts Life and Disability Plan options Vision, Dental and Medical options 401K 2% Match With a global presence in 28 countries with 140 offices worldwide, SEGULA fosters a close relationship with its customers thanks to the expertise of its 11,000 employees. SEGULA TECHNOLOGIES is an Engineering and Design Services company with a proven ability to boost innovation and competitiveness within the major industrial sectors, including Aerospace & Defense, Automotive, Energy, Rail, Naval, Pharmaceutical, Oil & Gas, Job Description Adhere to General Work Requirements Perform hidden damage inspection Ensure all paperwork is complete and complies with engineering specifications, manufacturers maintenance manual, and Repair Station/Quality Control Manual prior to end-of-shift Perform service inspections of aircraft or components in accordance with applicable parts of chapter 14 CFR (FARs) and the manufacturer's maintenance manual Assist other inspectors in the performance of their duties within area(s) of qualification Perform the Preliminary Inspection upon arrival of an aircraft at the facility prior to the commencement of maintenance or inspection. Inspect aircraft maintenance, repairs and alterations performed by Aircraft Maintenance Technicians to ensure the corrective action was completed Inspect all flight control systems maintenance Inspect fuel panels, final floorboard installation, final nose cowl closing, final aft fuselage closing, and final circuit breaker panel installation and provide “OK to Install” Inspect engine installation and provide “Installation OK” Train, coach and mentor employees in the performance of duties in area(s) of qualification Provide data to customers as requested Adhere to General Work Requirements as required in coordination with Quality leadership Perform conformity inspections of engineering documents to most current design per assigned aircraft. Weigh aircraft using the pre-weight checklist Initiate RED's and RFE's as required Research aircraft drawings and technical data Update Maintenance Manuals with revisions as required Qualifications You typically have 5 years' aircraft maintenance experience You have 2 to 3 years' inspection experience - preferred You typically have 1 year aircraft maintenance experience with business jet aircraft - preferred You have the ability to read and interpret engineering documents and maintenance manuals You have an Airframe & Powerplant (A&P) license or appropriately rated Repairman Certificate. You have basic knowledge of SAP You have working knowledge of business aircraft inspection programs, for example, final close out procedures, engine installations, and in-process inspections You have working knowledge of business aircraft maintenance, preventative maintenance, rebuilding, and alteration as related to inspection buy-off You have working knowledge of Repair Station/Quality Control Manual Additional Information All your information will be kept confidential according to EEO guidelines. Candidate must be authorized and elegible to work in the Unite States for any employer

Job Description Stinger Bridge & Iron, an AISC certified structural steel fabricator and PCI certified precast concrete girder fabricator and erection contractor. Stinger focuses primarily on the Southwestern Bridge and Highway market, specializing in bridge projects. Stinger fabricates in its Coolidge, Arizona facility located south of the Phoenix/Chandler/Gilbert area and erects work in Arizona, California, Nevada, New Mexico, Texas and Colorado. For additional information about our company visit our website at **************************** Stinger is currently seeking a Quality Control Inspector / Tester for the Structural Steel fabrication shop. POSITION SCOPE: The Quality Control / Quality Assurance Inspector conducts sampling and testing structural steel and misc. metals. This is a safety sensitive position. ESSENTIAL DUTIES: Inspection of Structural Steel members for compliance with specifications, shop drawings and production processes and procedures. Other duties as assigned. BACKGROUND: Certifications a plus - past experience EQUIPMENT USED: Personal Computer Phone/fax Computer Software including: MS Windows 7, MS Office 2010 Word, Excel, Outlook, CAD, and Tekla. Stinger Bridge & Iron is an Equal Employment Opportunity Employer and an Equal Opportunity Employer of Individuals with Disabilities and Protected Veterans. Pre-employment physical and drug testing are required. If you require an accommodation to apply, please contact HR to request it. This is only to request an accommodation to the application process and is not an email to inquire about your application status. Job Posted by ApplicantPro

DESCRIPTION OF JOB SCOPE Quality Control Raw Material Inspector is an employee in the Quality Control Department. Quality Control Raw Material Inspector is responsible for inspecting all incoming raw materials for adherence to appropriate Classic Salads Quality Specifications on file. This position has direct responsibility for ensuring all work activities under its span of control are performed with attention to the highest standards of food quality, safe processes, compliance with all appropriate legal requirements. DESCRIPTION OF JOB RESPONSIBILITIES: Adhere to all Classic Salads Food Safety and GMP Policies, including Basic Policies (TRN-0101, TRN-102, TRN-103, TRN-104, TRN-105, TRN-1061.) Complete Classic Salads Quality Standard Operating Procedure Training (CS-SOP-5010, CS-SOP-5011. CS-SOP-5021. CS-SOP-042. CS-SOP-6021.CS-SOP-6062. Calibrate scale and thermometer. Document calibration. Collects samples of raw materials for visual inspection. Inspects all incoming raw materials against specifications (quality attributes, visual defects, field tag verification, organoleptic, etc.). Notifies the QA Supervisor of any raw material deviations from specifications. Completes document inspection on Raw Material Inspection log and files accordingly. Compares Receiving Log to Raw Material Log to ensure all incoming raw materials have been inspected. When called by the Receiving Department, inspects incoming trailers for condition at arrival. Assists with HOLD products. Has the authority to place any raw material on HOLD that does not comply with Company quality specifications. Notifies the Production Supervisor and QA Supervisor immediately. Assist QA Supervisor to support the Hold and Release Program for raw materials and finished products. Verifies that all FieId Tag or Harvest Tag are received according to customer requirements and meet specifications. Requests missing or incomplete tags and follows up to ensure they are provided in a timely fashion. Participates in sensory training and evaluation to help ensure the highest quality of our products. Ensures that all work activities are performed with attention to the highest standards for quality, safety, and compliance with all appropriate legal and food safety requirements. Follows all company policies & procedures as well as the GMP's (Good Manufacturing Practices). Maintains a high level of safety awareness for an accident-free workplace. Reports any unsafe or hazardous work conditions or safety-related issues to Management. Cross-train to perform tasks of QC Technicians if necessary (Trim Line, Pack Out, Clamshell, Vaccum Tube, and Dock QC Stations). Perform any other QC task as necessary. Wear required Personal Protective Equipment (PPE): bump cap, hearing protection, hair net, beard net, eye protection (goggles), face shield. gloves. slip resistant shoes. wet/rain suit. apron. Work overtime, weekends, and holidays as needed. Able to work under pressure and time. Able to work in a cold/wet environment (34 - 36 °F Degrees). Verify raw receiving documentation (COA, Load Tag) according to CS-SOP-6021 Verify raw receiving truck cleanliness and document. Communicate in a professional manner with raw material vendors using e-mail, phone, etc. Report all injuries and incidents big or small. EDUCATION AND/OR WORK EXPERIENCE High school diploma or equivalent is preferred. Minimum of 2-5 years of experience in Produce Quality Assurance or a related field preferred. Abliity to speaks, read, and write in Spanish. Ability to read and comprehend simple English instructions. Demonstrated knowledge or experience in required computer applications Microsoft Office. Ability to manage priorities and workflow within constantly changing priorities with enthusiasm. Preferred to be able to travel with the Company to Yuma Arizona during winter months (mid-November to end of March). PHYSICAL ACTIVITY REQUIRED OF THE EMPLOYEE TO PERFORM THE JOB CONSTANTLY FOR 8 OR MORE HOURS WALKING, STANDING, BENDING NECK, BENDING WAIST, SQUATTING, CLIMBING, TWISTING NECK, TWISTING WAIST, BOTH HANDS USE (SIMPLE GRASPING, POWER GRASPING, FINE MANIPULATION, PUSHING AND PULLING, REACHING BELOW AND ABOVE SHOULDER LEVEL) DAILY LIFTING AND CARRYING REQUIREMENTS FOR 8 OR MORE HOURS FREQUENTLY CARRY AND LIFT 1-25 LBS 100 FEET OR LESS CONSTANTLY, TEAM LIFT 25-50 LBS 20 FEET OCCASIONALLY DESCRIBE THE HEAVIEST ITEM REQUIRED TO CARRY AND THE DISTANCE TO BE CARRIED: TEAM LIFT 25-50 LBS RAW PRODUCT TOTE 20 FEET OCCASIONALLY

The Aircraft QC Inspector (Technical Inspector) (UH-60) Inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty. Inspects removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Performs scheduled and special inspections. Inspects and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. Inspects forms and records related to aircraft maintenance. Inspects defective parts of the aircraft. Plans, conducts, and supervises aircraft technical inspections, including repairs and modifications to aircraft structures, structural components and engines. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. Participates in maintenance test-flights and operation checks as required. Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration. Performs additional duties, including maintenance duties, as requested. Adheres to company policies and safety programs (Safety-first mentality). Minimum Requirements High School Diploma or equivalent is required. U.S. military technical school or specialized training course is desired; certification of education level is required. Valid up-to-date A&P license with IA (preferred ) Shall have five years' aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All Mechanic experience must be within the six most recent years. Shall have five years of recent applicable aircraft maintenance experience. Shall have at least one year's experience inspecting MDS aircraft assigned. All Inspector experience must be within the ten most recent years. Back shop TI shall have at least one year's experience on components being inspected. Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P) (preferred). Valid Driver's License. Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20. Clearance Requirements Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Knowledge & Skills Thorough knowledge of aircraft systems on the assigned MDS. Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). Advanced knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects Possess the level of experience to inspect all required aeronautical-type maintenance to be performed by aircraft mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Exceptional communication skills, leadership abilities, and personnel management skills are required. Ability to communicate effectively, both verbally and in writing. Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

We're Hiring! We are seeking a highly qualified Quality Control Inspector to join our team. If you are committed to influencing a positive culture and have a great work ethic, then this is the job for you. Perks and benefits Flight benefits for travel on United Airlines, including buddy passes for friends and family. Competitive salary, paid holidays, PTO, sick time, and medical/dental/vision insurance. Position Summary Quality Control Inspectors perform duties as the Maintenance Shift Trainer and responsible for performing the inspection and return-to-service functions for the maintenance operations performed at the repair station. The Quality Control Inspector plays a vital role in ensuring that our aircraft, engines, and components are maintained and repaired to the highest quality and safety standards and ensuring that airworthiness and reliability standards are achieved and unwavering. Work Schedule & Shift: Two available 3:00 PM to 1:30 AM, Sunday-Wednesday, with a 30-minute lunch break daily. 3:00 PM to 1:30 AM, Wednesday-Saturday, with a 30-minute lunch break daily. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Maintain work environment to ensure a safe, clean, and orderly aircraft hangar Ensure safe and legal practices in accordance with FAA regulations and United Aviate policies, procedures and regulations Ensure all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations, company policies and procedures, and applicable maintenance manuals Perform in-process inspections for all critical operations, Required Inspection Items (RII), torque verifications, and any steps or operations that would not be visible for inspection after assembly or completion Perform final inspections of aircraft, engines, systems or sections, bays/compartments, prior to closure of panels or cowls Perform verification and reviews of maintenance operations to ensure all applicable procedures and processes are followed Verification and review of all maintenance documentation to ensure compliance with internal and external standards and policies Perform final inspections and return-to-service inspections Assist technicians in the performance of their duties in the form of mentoring, training, and procedural inputs (utilizing approved reference materials) Support the Quality group with any audits, investigations, trends, issues, or corrective action plans, etc. Participate in and provide inputs to regular inspector team meetings Must maintain a neat and professional appearance Perform other duties as assigned Qualifications Minimum Requirements Experience Quality Control Inspectors must be Airframe & Powerplant certificate holders with a minimum of five years' experience in aviation maintenance. QCI personnel must have an in-depth knowledge and experience with the following: Applicable FAA regulations Repair Station procedures, policies, processes, and requirements Inspection methods, techniques, practices, aids, equipment, and tools used to determine airworthiness. Ability to understand and interpret aircraft technical data Demonstrated high level of Attention-To-Detail Education The requirement to be a certified mechanic (and/or inspector) through FAA for a U.S. citizen include: High School Diploma or Equivalent required Minimum age requirement of 18 years old Fluent in English Possess an Airframe & Powerplant Certification Essential Knowledge, Skills, Behaviors Must be qualified as an inspector (level 2) on the Repair Station Roster Must have exceptional written and oral communication skills and be able to interact with a wide variety of people Advanced computer skills (MS office programs, such as Word, Excel) are preferred Advanced knowledge and ability to navigate Corridor (maintenance software) Ability to successfully work with others as part of a team to achieve established goals Ability to work independently and within a team setting Outstanding attention to detail, organizational skills, valuing safety and adhering to company policies Embrace, enforce, and promote the highest quality and safety standards Ability to train and mentor technicians in the performance of their roles effectively and accurately to foster overall reliability and quality results In-depth knowledge of the general principles of inspections and continuous development of aircraft-specific knowledge and inspection details Commitment to the company culture as a subsidiary of United Airlines and valuing the Core4 principles United Aviate Academy is an equal opportunity employer. We are committed to diversity and welcome all qualified individuals of different backgrounds.

All Things Metal (ATM) is a structural steel fabricator and erector located in Phoenix, Arizona. We are a small family-owned business with a big business mindset and our cutting-edge projects are leading the industry in a dynamic way. Our pledge to “Building Iron-Strong Relationships” doesn't stop at our clients but it starts with our commitment to our hungry, humble & smart team members. Our “A-team” has been recognized as being one of the Top 100 companies to work for in Arizona by AZcentral.com 7 times! We are currently seeking a detail-oriented welding structural steel fabrication quality control inspector to join our team on the industrial product line. If you are ready to start a rewarding career in a high-powered work environment apply today! JOB SPECIFICATIONS: Support the fabrication shop by performing quality control inspections while meeting the demands of production (Includes fit-up, weld, final QC, parts & finish/coating inspections) Record and maintain inspection records for quality assurance per City Certification QSM Communicate effectively with fabrication foremen, project managers, and team members throughout the company Plan & Coordinate inspections as required Maintain compliance with the QSM throughout the Quality Control process Establish & build quality control standards & processes as existing and new product lines progress Lead internal & external quality audits & meet project deadlines QUALITY OVER QUANTITY: We are looking for a HUNGRY, HUMBLE & SMART candidate that exhibits the following behaviors Proactive & Trustworthy Team-oriented Flexible Dependable Organized Confident Positive Strategic & Urgent Relentless & Purposeful Self-motivated Ethical & professional Possesses a Win-Win attitude EXPERIENCE (Resolution + Quality + Accuracy) Certified Welding Inspector (CWI) a plus, but not required Five years fabrication shop welding experience Structural steel experience Ability to read and interpret structural steel shop drawings and blueprints. Knowledge of AWS and AISC codes applicable to steel fabrication and erection Comply with shop safety policies while working in a safety sensitive position Must have structural steel fabrication experience. BENEFITS: We might be small, but we offer big benefits! Medical, dental and vision insurance 401K package with employer matching Dave Ramsey's Smart Dollar program for team members (To promote personal financial security) First-time home buyer promotion program Library of business & leadership books to promote knowledge & growth Family friendly culture events Birthday & work anniversary perks Holiday/PTO/Sick time Competitive pay. $24-$30 an hour depending on experience If you're ready to start your career as a Quality Control QC inspector, apply today!

The Quality Inspector 2 position directly supports the Production Departments through incoming inspection of purchased components and final inspection of finished assemblies and components. Responsibilities * Conducts inspections of products, materials and components at various stages of the production process to ensure compliance with established quality standards * Participates in gathering statistical data from product and processes * Performs visual inspections of soldered connections, mechanical inspections of electronic and electro- mechanical assemblies and subassemblies * Visual inspections of soldered assemblies to IPC-A-610 standards, and harness assemblies. * Prepares and completes all necessary documentation for reporting acceptance/rejection of inspected and/or tested items * Identifies design, process or other inefficiencies and reports quality concerns and issues * Maintains Inspection records * Creates & reviews First Article Inspection Reports (FAIR) IAW AS9102 * Performs Customer source inspection * Issues Authorized Release Certificates/Tags * Maintains Calibration recall and records * Prepare certifications in accordance with appropriate regulation. * Other responsibilities as assigned * Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Physical Requirements * Approximately 75% sitting and 25% standing/walking about in-door Company facilities. * Lift and carry up to 30 lbs. * Use head and neck in static position, looking up/down and side-to-side. * Perform light lifting from floor, table and shelf. * Push and pull carts or mobile tables, loaded and unloaded. * Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling. * Minimal: exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces * Typing with computer and keyboard Qualifications * Ability to follow established job instructions and procedures with minimal supervision * Able to apply a systematic QA approach while using existing procedures to solve a range of technical issues * Skilled at using measuring equipment as prescribed by job assignment * Must have knowledge of geometric dimensioning and tolerancing, assembly drawings, parts lists, workmanship standards, standard inspection procedures, wiring diagrams and be able to add tolerances using decimals, etc. * Technical knowledge of Aerospace standards for First Article Inspection Reports, AS9102 * Must be able to interpret and follow written and verbal instructions, including engineering drawings, charts, diagrams, and sketches * Read, write and understand English. * Read technical drawings with multiple views. * Proficient computer skills * Attention to detail * Critical thinking and problem solving * Organizational skills Education & Experience * Education: A Secondary Certificate/High School Diploma or equivalent * Certifications: Vocational training, apprenticeships or the equivalent experience in related field beneficial * Experience: 2+ years of relevant experience (Aerospace and Electronics environments preferred)

Job Description What we do: Paragon develops and produces innovative solutions for the most demanding life support and thermal control challenges in the space and defense markets. Whether it is deep space, low earth orbit, undersea, or on the ground, our systems and hardware provides safe and comfortable environments for astronauts, explorers, military personnel, and unmanned space and terrestrial vehicles. Summary of Position: As a Quality Inspector, you will work hands-on in a production setting and utilize lean manufacturing concepts to assess products, processes, mechanical, electro-mechanical, and bio-tech systems. Inspect product from production, suppliers, or other Paragon sites to validate workmanship, measured dimensions and Quality System documentation that conforms to product requirements. Accountable ownership to the non-conforming documentation process for hardware that does not meet product specifications or compliance requirements Facilitate the disposition of parts non-conforming to inspection plans or program requirements Support other areas of Quality as required Required skills: Ability to interpret product specifications, GD&T measurement requirements to drawings/blueprints and engineering documents Able to use calibrated inspection and precision measurement equipment to validate dimensions or features Basic Computer/MS Office skills Effective written and communication skills Work independently/self-motivated, with the ability to collaborate as part of a functional team Strong understanding of Geometric-Dimensioning & Tolerancing specification ASME Y14.5 Preference is 5 years minimum of aerospace inspection experience, certification to an industry standard is an acceptable equivalent Familiarity with AS9100 standards and practices Application of Critical thinking, practical problem solving and Root Cause Analysis skills Capable of working in a fast-paced and collaborative environment Desired Skills: Knowledge of SAP or other ERP software PCDMIS experience Ability to program ROMER ARM CMM utilizing PCDMIS Experience working in aerospace, spacecraft, or missile production Specific aerospace inspection, control of nonconformity and First Article Inspection Familiarity or certification to American Society of Quality standards Job Posted by ApplicantPro

As a Level 3 Inspector here at Honeywell, you will play a crucial role in ensuring the quality and compliance of our products. You will be responsible for conducting inspections, tests, and audits to verify that our products meet the required standards and specifications. Your attention to detail and commitment to excellence will contribute to the overall success of our manufacturing operations. You will report directly to one of our ISC Production Supervisors and you'll work on site in our Tempe, Arizona plant. In this role, you will have a direct impact on the quality and reliability of our products, ensuring that they meet the highest standards of performance and safety. - Conduct inspections, tests, and audits to verify product quality and compliance - Identify and document any non-conformities or deviations from standards - Collaborate with cross-functional teams to address quality issues and implement corrective actions - Maintain accurate records and documentation of inspection results - Continuously monitor and improve the effectiveness of quality control processes **KEY RESPONSIBILITIES** - Conduct inspections, tests, and audits to verify product quality and compliance - Identify and document any non-conformities or deviations from standards - Collaborate with cross-functional teams to address quality issues and implement corrective actions - Maintain accurate records and documentation of inspection results - Continuously monitor and improve the effectiveness of quality control processes **BENEFITS OF WORKING FOR HONEYWELL** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes: + Employer subsidized Medical, Dental, Vision, and Life Insurance + Short-Term and Long-Term Disability + 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance + Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays **U.S. PERSON REQUIREMENTS** Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posted on October 15, 2025. **YOU MUST HAVE** - Prior experience in quality control or inspection role - Strong knowledge of quality control principles and practices - Attention to detail and ability to identify non-conformities or deviations - Excellent communication and documentation skills **WE VALUE** - High school diploma or equivalent - Prior aerospace experience in a manufacturing or production environment - Knowledge of industry standards and regulations - Certification in quality control or inspection Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.