Quality control inspector jobs in Bakersfield, CA - 1,549 jobs

Job Title: Quality Inspector Duration: 06 Months contract (Potential Temp to Perm) Payrate: $23.75/hr. Shift: 2nd shift, Mon-Fri, 1:45pm-10:15pm Description: Responsible for performing and recording dimensional and visual inspection of parts, assemblies, and final product in coordination with the Engineering, Production, and Manufacturing Engineering departments. Responsibilities: Conduct all levels of product inspections using a variety of inspection instruments and equipment (e.g. CMM, micrometers, calipers, parallels, sine bars, height masters, optical comparator, Johnson gauges, etc.) Verify compliance of finished hardware with drawing requirements based on shop practices as they relate to unfinished hardware. Perform both detailed, assembly-level drawings with appropriate supporting documentation verifying actual results against drawing and/or specification requirements. Correctly read and interpret detailed, assembly-level drawings and customer specifications. Use shop mathematical calculations relative to the complexity of the project (e.g., GD&T, tolerance stack-ups, calculations for areas, angles, lengths, etc.) Execute formal first article reports to AS9102 standards. Mentor inspectors, as needed. Use statistical process control (SPC) symbols and tools along with correct interpretation of associated control plans and charts. Meet deadlines of assigned jobs while maintaining the integrity of the position. Work closely with customer representatives during source inspections and audits. Seek lean process improvements. Requirements: High school diploma/GED 1 year certificate from college or technical school OR 3-5 years related experience and/or training US Citizenship required Skills: Good written and verbal communication skills Excellent problem-solving and analytical skills Keen attention to detail Ability to understand and conform to internal company procedures. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Familiarity with but not limited to: Database, Basic windows/internet browser, ERP/Inventory, Microsoft Office - Excel, Word, Power Point, Blueprint Reading, GD&T Terminology and Symbols, Material finishes, Raw Materials, Mechanical Inspection Blueprint reading capabilities Ability to lift 40lbs Teamwork and collaboration

A global technology company is seeking a Hardware Engineering Manager in Sunnyvale, California. This hybrid role emphasizes leading a team to ensure high-quality hardware for networking products. Candidates should have a Bachelor's in Electrical Engineering or Computer Science, with 3+ years in hardware leadership and a strong customer focus. The position includes managing multiple projects and driving hardware quality improvements. Competitive compensation based on experience, ranging from $130,500 to $300,000 annually. #J-18808-Ljbffr

A construction safety company based in California is seeking a Traffic Control Associate responsible for managing traffic around work zones. Applicants must possess a valid California Driver's License and demonstrate strong interpersonal skills. The position involves coordinating traffic flow, setting up safety equipment, and ensuring the safety of all personnel involved. Potential candidates should have a high school diploma and experience in a similar role is preferred. We offer competitive wages and a robust benefits package. #J-18808-Ljbffr

Essential Duties and Responsibilities Include the following (other duties may be assigned): Perform visual inspections of structural steel fabrication, welding and bolting. Perform material identification, verification and sampling of unidentified steel Prepare reports and other related documents in accordance with good engineering practices and applicable building codes Communicate and document discrepancies in work inspected to steel shop and field crews and to SALEM engineers. Complete appropriate documentation in a timely and accurate manner Understand and utilize safe working practices Preferred Certifications CWI (Certified Welding Inspector) Certification ICC Structural Steel & Welding Special Inspector and ICC Structural Steel & Bolting Special Inspector certifications are a plus Requirements Minimum of 5 years of welding inspection experience preferred CWI and ICC certifications maintained current and in good standing Valid driver's license and clean driving record required Ability to use Microsoft Office Suite to submit reports on company templates Must be able to lift a minimum of 50 lbs. Must be able to work off ladders and scaffold at construction sites English speaking, reading and writing required Job Type: Full-time

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shear wave)/MT will be conducted upon hiring. The position will be supporting clients in the Los Angeles area. ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shear wave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

Manufacturing Operator/inspector Starting Pay $25-27/hr Hours: M-F 8AM-5PM (flexible start after training) 4 months + possible Contract to direct hire Requires attention to and an eye for detail. Will inspect and clean small metal parts used in medical devices. Good dexterity to handle the parts. Compare parts to spec sheet. Familiarity with micrometers, calipers, and working under microscope. Small company environment so will ask to assist in running laser cutting machines. The successful candidate will be self-directed and hands-on. The person will be an integral member of our small team. The primary responsibilities will be part cleaning, final inspection, and packaging of customers' parts. We operate in an ISO 13485 environment. The ability to follow instructions and properly document your work is critical. Other helpful skills are part inspection and measurement, utilizing a microscope, and a vision measuring system. Our client is willing to train an individual in the skills necessary to be successful. The position requires you to move from station to station and be on your feet most of the day. Will need to lift objects over your head that weigh about 3-6 lbs. It will require the wearing of gloves and PPE. Organization skills and the ability to track multiple work orders in process simultaneously are a plus. Benefits (employee contribution): Health insurance Health savings account Dental Insurance Vision insurance Flexible spending accounts Life insurance Retirement plan All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

People Drive Our Success Are you enthusiastic, highly motivated, and have a strong work ethic? If yes, come join our team! At Cathay Bank - we strive to provide a caring culture that supports your aspirations and success. We believe people are our most valuable asset and we proudly foster growth and development empowering you to achieve your professional goals. We have thrived for 60 years and persevered through many economic cycles due to our team members' drive and optimism. Together we can make a difference in the financial future of our communities. Apply today! What our team members are saying: Video Clip 1 Video Clip 2 Video Clip 3 Learn more about us at cathaybank.com GENERAL SUMMARY Responsible for review/callback of new loan bookings, renewals, monetary transactions, maintenance, and other loan servicing activity. Ensure loan servicing activity follows established procedures, data entry is accurate, and proper support is obtained. ESSENTIAL FUNCTIONS Review of new loan bookings, renewals and modifications ensuring loans are entered into the servicing system accurately. Review of loan maintenance ensuring the compliance with the loan terms and supporting documentation. Review of designated monetary transactions for accuracy, proper authorization, validating computations, such as interest adjustments, prepayment calculations, etc. Review of servicing activities, such as demands and collateral releases, for compliance with established bank policies and procedures. Review ARM/variable rate adjustments and payment changes, including other system automated activity ensuring calculations are according to the loan documents. Instructs staff on finding that require correction/review and confirms proper correction. Maintains callback and exception report documentation in an organized and accessible manner as evidence of review and correction. Supports internal/external audits and examinations providing supporting documentation in a timely manner. Completes all special projects as requested. QUALIFICATIONS Education: High school diploma or equivalent; some college courses a plus. Experience: 3 years of commercial loan servicing experience required Skills/Ability: PC literate, proficiency with MS Office General knowledge/proficiency of IBS loan system a plus Able to work in a fast pace environment while maintaining a high level of accuracy Strong organization skills, able to prioritize work Detail oriented Strong problem-solving skills Strong verbal and written communication skills OTHER DETAILS $26.44 - $31.25 / hour Pay determined based on job-related knowledge, skills, experience, and location. This position may be eligible for a discretionary bonus. Cathay Bank offers its full-time employees a competitive benefits package which is a significant part of their total compensation. It is our goal to provide employees with a comprehensive benefits package to fit their needs which includes, coverage for medical insurance, dental insurance, vision insurance, life insurance, long-term disability insurance, and flexible spending accounts (FSAs), health saving account (HSA) with company contributions, voluntary coverages, and 401(k). Cathay Bank may collect personal information from potential job candidates and applicants. For more information on how we handle personal information and your applicable rights, please review our Privacy Policy. Cathay Bank is an Equal Opportunity and Affirmative Action Employer. We welcome applications for employment from all qualified candidates, regardless of race, color, ethnicity, ancestry, citizenship, gender, national origin, religion, age, sex (including pregnancy and related medical conditions, childbirth and breastfeeding), reproductive health decision-making, sexual orientation, gender identity and expression, genetic information or characteristics, disability or medical condition, military status or status as a protected veteran, or any other status protected by applicable law. Click here to view the "Know Your Rights: Workplace Discrimination is Illegal" Poster: Poster- English Poster- Spanish Poster- Chinese Traditional Poster- Chinese Simplified Cathay Bank endeavors to make **************************** to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact, Mickey Hsu, FVP, Employee Relations Manager, at or . This contact information is for accommodation requests only and cannot be used to inquire about the status of applications.

Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Step into Your New Role Kleinfelder Construction Services is seeking an experienced Lead Roadway Inspector to perform quality assurance inspection services on transportation-related road and highway improvement projects in the Inland Empire. The Lead Roadway Inspector will be assigned a field vehicle and gas card, reporting to a construction job site(s), with the ability to work extended shifts and nights as needed. The initial assignment is for a bus rapid transit project in Ontario. Job Duties * Lead a team of field inspectors coordinating inspection between multiple jurisdictions and municipalities * Perform quality assurance inspection and documentation of civil (roadway) construction activities under the direction of a Resident Engineer * Coordinate construction activities with various property/business owners within the proximity to the project; provides verification of adherence to temporary construction easements * Issue field directives to the Contractor; attend weekly construction meetings; coordination of the construction schedule and notifications with the public outreach team * Coordinate Quality Assurance materials sampling and testing * Verify the implementation of the Contractor's Quality Control Program and adherence to plans and specifications * Prepare detailed Daily Inspection Reports, with photos, accurately reflecting the construction progress * Measure, calculate, track, and record pay quantities for monthly estimates * Assist in maintaining, supporting, and promoting a safe work environment while complying with applicable safety rules, policies, and procedures * Maintain a set of field as-built drawings * Assist the Resident Engineer with field input on change orders, RFIs, submittals and response letters to the contractor, and as-built drawings Qualifications/Skills * High school diploma or equivalent. Associate degree preferred. * Minimum of ten (10) years of demonstrated experience in roadway construction inspection of highways or major public works projects including traffic control, PCC and AC paving, earthwork, grading, drainage, and signing and striping * Knowledge and experience with equipment used in construction inspection, surveying and field testing of construction materials. * Knowledge and experience with principles of effective communication and supervision * Able to work independently, make effective decisions concerning construction work in progress and solve field problems * Able to direct the efforts of subordinate inspectors Additional Preferred Qualifications 1) BS degree in Civil Engineering and/or EIT 2) Caltrans inspection experience 3) Proficient in the use of Microsoft Office programs 4) Knowledge of Caltrans standard plans, specifications, procedures, and Construction Manual 5) Ability to assist the Resident Engineer in all aspects of required field and office construction engineering work including, but not limited to the following: * Experience in the inspection of traffic control system compliance * Experience in Water Pollution Control Program (Storm Water Pollution Prevention Plan) enforcement * Knowledge and experience with equipment used in construction inspection, surveying, field testing of construction materials, and construction office engineering * Knowledge of computers, computer applications, and computer software programs such as Microsoft Office (Word, Excel, PowerPoint, and others) * Knowledge and experience with principles of effective communication and supervision * Ability to work night shifts for an extended duration Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. Salary range: $34.73 - 57.96/hr. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder. #LI-SF1

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR dEXscfj8i0

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview Under the direction of the Task Order Manager, the Quality Control Inspector is responsible for conducting inspections to ensure compliance with contract requirements and Quality Control and Safety Plans. Pay Rate: $26.74/hourly Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Review all site work to verify compliance in accordance with applicable plans and procedures. * Inspect and diagnose problems to determine corrective actions/repairs. * Inspect work in progress and finished work for discrepancies in accordance with the QC and applicable Safety Plans, and contract requirements.Complete necessary inspection reports and documentation required to support findings. * Assist in preparing Safety incident and hazard reports as required. * Maintains accurate administrative records. * Review all site work to verify compliance in accordance with applicable plans and procedures. * Respond to emergency site maintenance as required. * Ensures proper housekeeping practices are strictly observed. * Maintain open communications with personnel. * Performs other duties as assigned by the supervisor. * Other duties as assigned. Accountable For: * Tools and equipment within his or her possession. * Using PPE when required. * Timely completion and accuracy of all work. * Working closely and harmoniously with fellow workers. * Adherence to all Safety rules and regulations. Job Requirements Mandatory: * Working knowledge of Microsoft Programs, including but not limited to: Outlook, Word, PowerPoint, and Excel or equivalent software program. * Understanding of Government contracts, correspondence, reports, and records. * Knowledge of generally accepted standards of workmanship in custodial services. * Excellent communication skills, both oral and written. * Excellent organizational skills. * Mature judgment and ability to work with little or no supervision. * Ability to communicate ideas effectively with personnel at all levels. * United States Citizen. * High School Diploma or Equivalent. * Ability to pass pre-employment background check and drug screen. * Must be able to read, write, and speak English fluently. * Valid driver's license with excellent driving record (Must provide current driving record). * Ability to obtain access to U.S. Government Installations through the Defense Biometric Identification System (DBIDS). Preferred: * 2 yrs custodial experience. * Two-year degree in Safety, Industrial Hygiene, or a related field or broad experience in the same or similar areas. * Bilingual - Spanish Working Conditions: * Work is performed indoors and outdoors. Outdoor work is subject to temperature extremes and inclement weather conditions. * Work hours are subject to change, with overtime, weekend and/or holiday work as needed. * Subject to hazards that may cause personal bodily harm; diseases, cuts, bruises, burns, common cold, influenza, dust odors and elevated noise levels. * Tasks may be performed on uneven, inclined, hard and soft carpeted floors, cement structures and surfaces. * While performing duties of this job, the employee is occasionally required to stand and/or walk for long periods of time, sit, use of hands and fingers, handle, or feel objects, tools or controls, reach with hands and arms, climb stairs, climb ladders, balance, stoop, kneel, crouch or crawl, talk, hear, or smell. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision. May be required to operate regular and specialized vehicles. Physical Requirements: * Must be able to lift to 50 lbs. * Must be able to climb stairs and ladders as required. * Must be able to load/unload materials, tools, and equipment. * Involves walking, bending, stooping, twisting, and reaching. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

The Quality Assurance Technician is responsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. Responsibilities Maintain product quality by analyzing manufacturing and engineering requirements and devising testing methods and procedures; Establish product quality documentation by writing and implementing quality assurance procedure Interact with the leadership group, production team members, and maintenance departments to improve and maximize plant output, efficiency, quality and safety Manage Quality Control Program that ensures that product is inspected to meet acceptable safety quality standards Maintain and achieve internal quality targets and measurements; Ensure Production and other support areas of the plant are maintained to highest standards and in strict conformation to GMP standards Achieve quality targets and ensures accurate records of quality compliance; Ensures the cleanliness, sanitation and overall organization of manufacturing areas; Ensures consistency with quality standards, practices, and policies; Support change efforts at manufacturing plant to improve and enhance quality systems; Support training of quality procedures throughout the plant; Communicate with production regarding productivity status and discrepancy; Perform other duties assigned by Executive Management to support the department. Safeguards and maintains company equipment and property, including Personal Protection Equipment (PPE); Ensures all areas are kept clean at all times; Attends all company training sessions Performs other related duties as assigned. Qualifications Must read, write and communicate in English. Knowledge of OSHA laws and regulations. Must be able to taste all foods with no aversions or allergies. Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to work under pressure in a very fast paced environment Able to obtain HACCP, SQF practitioner and IBWA certification (within 1 year). Able to perform root cause analysis. Able to communicate and work well with people on all levels of the organization. Able to receive, analyze and report out information efficiently. Knowledge of Good Laboratory Practices (GLPs) - ability to follow laboratory SOPs. Knowledge of Good Documentation Practices (GDPs) - ability to keep proper records. Strong computer literacy - MS applications, databases. Strong verbal and written communication skills. Strong analytical skills - ability to analyze large amounts of data and determine deficiencies. Strong attention to detail and accuracy. 2-4 years - Experience in food processing Associate Degree in related field This position is classified as Non-Exempt (eligible for overtime). The expected hourly rate for this position is between $21.00 - $26.00 per hour based on a full-time schedule. Location, confirmed job-related skills and experience will be considered in setting the actual hourly rate. The Company is committed to providing equal opportunity for employees and applicants in all aspects of the employment relationship, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, veteran status, disability, age, religion or any other classification protected by law.

Job Description Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part may evaluate new procedures for non-standard rest and perform special set-up on new equipment assist others in correcting or preventing deficiencies in quality or workmanship give work direction to other inspectors know your customers expectations and drive action to meet them perform first article process identify component perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: Attention to detail Communication skills - verbal and written Organizing Judgement Data collection, management and analysis Team work Ability to interpret complex customer rules and regulations Demonstrated skills in project management and ability to train others to lead projects Works well independently Excellent interpersonal and communication skills Ability to mange time and prioritize multiple task in a fast paced environment Proficient in use of MS Office applications, MS Project, Outlook May require international travel and international business experience Knowledge of Lean manufacturing fundamentals

Career-defining. Life-changing. At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career About This Role: The 2nd Shift Quality Control (QC) Inspector is responsible for supporting manufacturing operations during second shift by performing inspection, documentation review, and batch release readiness activities for finished goods and sub-assemblies. This role focuses on reviewing batch records, travelers, and routers, ensuring Good Documentation Practices (GDP) compliance, identifying quality issues, and initiating nonconformances (NCs) when required. The QC Inspector also provides Receiving Inspection (RI) support as needed to ensure material flow continuity and compliance with inspection requirements. Why This Role Is Critical Provides real-time quality oversight on second shift, ensuring batch records, travelers, and GDP compliance are verified at the time of execution rather than retrospectively. Enables timely identification and containment of nonconformances, reducing quality escapes, rework, and compliance risk. Supports on-time release readiness and uninterrupted manufacturing flow, preventing inspection and documentation backlogs into first shift. Strengthens audit readiness and cross-shift continuity, ensuring clear handoff and sustained control of quality issues across shifts. What You WIll Be Doing Batch Record, Traveler & Router Review Perform detailed review of batch records and travelers for finished goods and sub-assemblies to ensure completeness, accuracy, and compliance with approved procedures. Verify that all required manufacturing steps, inspections, testing reports, in-process checks, and approvals are properly completed and documented. Ensure material traceability, including material lots, subassemblies, equipment identification (when applicable), and inspection status. Access and reference the electronic Quality Management System (eQMS) to ensure the current, approved revisions of drawings, specifications, procedures, and work instructions are used during inspection and batch record review activities. Verify that batch records, travelers, and inspection activities are executed against the correct released document revisions, and escalate discrepancies when outdated or incorrect documents are identified Identify documentation errors, omissions, or discrepancies and ensure timely correction in accordance with GDP requirements. Finished Goods & Sub-Assembly Inspection Perform in-process, final, or verification inspections of finished goods and sub-assemblies per approved inspection plans and work instructions. Ensure inspection results are accurately recorded and aligned with acceptance criteria. Support timely review and release readiness of manufacturing lots to maintain production flow. Nonconformance Identification & Escalation Identify, document, and initiate Nonconformance (NC) records when inspection results, documentation, or material conditions do not meet requirements. Ensure nonconforming material is properly identified, labeled, and segregated to prevent unintended use. Escalate quality issues to Quality Control leadership and Manufacturing supervision as required. Good Documentation Practices (GDP) Compliance Enforce GDP standards across all reviewed records, including batch records, travelers, routers, and inspection forms. Ensure corrections, clarifications, and late entries (when applicable) are performed per approved GDP procedures. Support identification of recurring documentation issues and participate in corrective actions or retraining as needed. Receiving Inspection (RI) Support Perform Receiving Inspection (RI) activities when required, following approved sampling plans, inspection criteria, and procedures. Verify material identification, lot traceability, and acceptance status. Accurately document RI results and communicate material status to Manufacturing and Quality teams. Compliance & Audit Readiness Perform all activities in compliance with ISO 13485, and internal QMS SOPs, DOP's and work instructions. Maintain inspection areas and records in a state of audit readiness. Support internal audits and regulatory inspections by providing accurate records and inspection evidence as requested. Cross-Shift & Cross-Functional Communication Communicate inspection results, documentation issues, and open quality concerns clearly during shift handoffs. Collaborate with Manufacturing, Quality Engineering, Receiving, and first-shift QC personnel to ensure continuity of quality controls. What We Want to See High School Diploma or GED required; Associate's or Bachelor's Degree in a technical or life sciences field is preferred. Minimum of 2-5 years of experience in a medical device manufacturing, pharma, aerospace or regulated manufacturing environment, preferably in Quality Control or Inspection. Experience navigating an electronic Quality Management System (eQMS) to review and reference released drawings, specifications, SOPs, and work instructions Working knowledge of Good Documentation Practices (GDP) and controlled document execution. Experience reviewing batch records, travelers, routers, and inspection records. Ability to identify quality issues and initiate nonconformance records in accordance with established procedures. Strong attention to detail with a focus on accuracy, compliance, and data integrity. Ability to work independently on second shift with minimal supervision. Effective verbal and written communication skills. Ability to manage multiple tasks and prioritize work to support production needs. Ways to Stand Out Experience performing Receiving Inspection (RI) or FAI activities. Familiarity with sampling plans, inspection plans, and acceptance criteria. Demonstrated experience reviewing engineering drawings, including GD&T, to identify critical-to-quality (CTQ) characteristics, specification notes, and applicable inspection requirements, and applying them during inspection and batch record review Experience using enterprise resource planning (ERP) systems (e.g., QAD, SAP) to support manufacturing execution, batch review, material status, and traceability is a plus Location: Orange County Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location. Estimated Pay Range $21.15 - $26.44 As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY. For more information, see *********************************************************************************** and *****************************************

The role of this position is to assist the QA Manager in coordinating a facility-wide GMP/HACCP Food Safety Program, and to ensure these programs are adhered to, including facility compliance and achieving audit requirements. Pay depends on experience. Schedule is from 3:00pm - 12:30am Monday through Friday with Saturday availability if necessary. Responsibilities Ensure proper sampling and documentation is complete on product, CCP metal detectors, weight control, calibrating scales, moisture machine verification, submitting samples Verify all logs from processing are complete and report any discrepancies Assisting in GMP compliance audits and inspections Perform Pre-op inspection and documentation, follow up on corrective action Performs monthly glass audit for Famoso and Kyte reports to QA Manager Other duties assigned by QA Manager and help in conducting training Must have the smocks ready for daily use in production area Must be able to understand and properly fill out daily documentation Conduct monitoring procedures stated out in HACCP and in their appropriate food safety and quality manuals, reporting breaches if any Conduct environmental swabbing on equipment throughout facility Requirements Requirements listed above are representative of the knowledge, skills, and ability required Must know math to be able to perform the QC testing, percentage and grams will be calculated

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

TempToFT We are seeking a reliable and hardworking Warehouse Support Associate to assist the Quality Control (QC) Department in a fast-paced warehouse environment. The ideal candidate will be detail-oriented, able to perform heavy lifting, and communicate effectively in both English and Spanish. Responsibilities: Support the QC department with daily warehouse operations. Perform heavy lifting, loading, and unloading of materials or products. Assist in inspecting, sorting, labeling, and organizing inventory. Maintain a clean and safe work area at all times. Follow all safety policies and procedures. Work efficiently in a fast-paced environment to meet production goals. Communicate effectively with team members and supervisors. Requirements: Previous warehouse experience preferred. Ability to lift up to 50 lbs frequently. Bilingual in English and Spanish Strong attention to detail and ability to follow instructions. Reliable and punctual with a positive attitude. Schedule & Pay: Schedule: Monday - Friday, with possible Saturday work. Hours: 7:00 AM - 3:30 PM Pay Rate: $16.50 per hour

Job Description Job Title: Business Development Center Representative Department: Business Development Center Reports to: BDC Director FLSA Status: Non-Exempt Position Description: Communicates with customers through email and phone calls in order to schedule appointments for customers to visit the store by performing the following duties. Duties & Responsibilities: Responds to customer requests from the Internet lead system and gathers information from the customer about the make, type, and quality of vehicle desired; trade in details; customer's goals “Mines” the existing customer database for new and/or additional customer interest in additional vehicle purchases, contacting such customers by email, phone, and text messages Researches and develops lists of potential clients. Identifies and qualifies business opportunities Follows up on sales leads and makes cold calls to potential clients. Schedules appointment with customer to visit the dealership to meet with a salesperson who will then conduct the steps of the sale. Consults regularly with the Internet Director. Follows an owner follow-up system that encourages repeat and referral business and contributes to customer satisfaction. Follows a prospect development system and sends follow up emails and makes follow up calls to those potential customers. Follows established prospecting steps and procedures. Remains knowledgeable of new products, features, accessories, processes, etc. Attends sales meetings and training sessions as scheduled. Meets, or exceeds, written forecast and projection numbers. Other duties as assigned. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience: High school diploma or general education degree (GED); or one to three months' related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to communicate orally or in written form effectively with co-workers, potential and current clients,. Ability to read, analyze and interpret written and verbal instructions. Ability to write routine reports and correspondence, including writing grammatically correct emails and text messages. Ability to effectively present information and respond to questions from managers, clients, and customers. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, and percentages. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate the ability to anticipate and solve practical problems or resolve issues. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to work 5 days a week, 8 to 10 hours per day. The employee is regularly required to talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is frequently required to sit or stand as needed. May require walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder heights, below the waist or lifting as required to file documents or store materials throughout the workday. May include lifting up to 25 pounds for files, computer printouts on occasion. The employee must have excellent keyboarding skills. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to an office work environment. The noise level in the work environment is usually moderate. Primary environment: ambient room temperatures, lighting and traditional office equipment as found in a typical office environment. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. ______________________________ ________________ Signature (Employee) Date ______________________________ ________________ Signature (Supervisor) Date