Quality control inspector jobs in Baltimore, MD

Mindlance is a national recruiting company which partners with many of the leading employers across the country. Feel free to check us out at ************************* Job Description Job Title: QC Inspector Location: Baltimore, MD Duration: 2+ Years Responsibilities: Inspector is in a high visibility position and therefore must always present themselves in a professional manner, with honesty and integrity. Must possess good interpersonal skills and willingness to learn. Observe, monitor and document proper completion of the following tasks in accordance with BGE specifications: Site survey Gas meter relocation To exterior Elevated Bollard installations Bucket Core drilled Bolt Down Elevate to Meter Engineering & Standards unique protection situations Coordinate with County/Municipal building inspectors for permits and final inspections Resolve customer questions and elevate to Field Supervisor as necessary unresolved issues Perform and document field safety audits. Proficient in using utility maps and locating equipment in the field. Must have 5+ years of QC inspection experience in a utility setting Gas OQ certified and/or Master Plumber/Gas Fitter are preferred Additional Information Thanks & Regards' ___________________________________________________________________________ Vikram Bhalla | Team Recruitment | Mindlance, Inc. | W: ************ All your information will be kept confidential according to EEO guidelines.

Summary/Objective: The Technical Service/Quality Control Technician implements and complies with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications. Essential Functions: Perform specimen tests of concrete from random loads or for special jobs or mixes; prepare test reports as required. Oversee unique jobs to ensure product standards are met, i.e., jobs that have restrictive specifications or require large quantities of material to be delivered. Perform aggregates and batch plants tests including daily graduation and moisture tests on all concrete being produced for State and spec projects. Certify concrete loads being delivered to "spec" jobs in accordance with SHA specifications; check loads for proper procedure and time of mixing. Perform quality assurance tests on trial batches of new concrete mix designs under close tolerance conditions and make adjustments until mixture meets specifications. Troubleshoot problems with customers, analyze and evaluate specific conditions, situations, quantities, etc., and provide appropriate resolution. Provide technical assistance and training to plant managers, equipment and yard operators, and drivers when requested. Perform laboratory tests including gradation, moisture, lightweight particles and specific gravity tests on aggregates. Select samples for materials that need certification by an outside laboratory or that are beyond the department capability. Transport these samples to the testing agency. Perform additional tasks such as cleaning facilities to ensure safety and cleanliness, moving equipment and materials, and completing tasks for other positions when incumbent is absent. Assist the Technical Services Manager and Assistant Manager as needed. Other duties as assigned. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/office and outdoors/field Exposure to dust and fumes/offensive smells. Exposure to chemicals such as concrete, chemical admixtures. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 50 lbs., repetitively lift 50 lbs., carry approximately 50 lbs., and push/pull approximately 75-100 lbs. Reach overhead and reach away from the body. Minimal kneeling, squatting and climbing may be required. Sit 3 hours per day, stand 5 hours per day, and walk 2 hours per day. ADDITIONAL QUALIFICATIONS Experience: Laboratory testing experience in ready-mix concrete or aggregates preferred. Special Skills: Written communication, verbal communication, and basic mathematical skills. Ability to use a computer and iPad, including Microsoft Office. Ability to use the company dispatching system. Ability to compute basic material calculations. Excellent interpersonal skills. Able to exhibit a high level of confidentiality. Excellent organizational skills. Must be able to identify and resolve problems in a timely manner. Certifications: Valid Driver's License. ACI Level 1 certification (must be obtained within 1 year of assuming position). Industry Related Experience or Skills: Background in concrete, construction, mining operations or building materials (preferred). Education Required: High School Preferred Education: N/A Bilingual in Spanish Preferred: Yes Interested in future opportunities with Chaney? Join our Talent Community to get alerts about newly posted positions. Click here to sign up!

Zachary Piper Solutions is looking for a Quality Control Inspector to join a design services company for mission critical systems. This is a FULL TIME job and onsite in Jessup, MD. Essential Duties of the QC Inspector: * Contract document review for compliance: RFP, Specs, Drawings, Submittals, etc. * Review design documents for constructability and contract compliance. * Implement 3-Phase Quality Control approach: Preparatory meetings, Initial inspections, and follow-up inspections. * Participate in daily safety meetings to discuss Quality issues and concerns. * Attend all required project meetings to provide resolution to any Quality issues from Owner/QC. * Manage and assist in resolving all Quality or Commissioning punch-lists. Qualifications of the QC Inspector: * 4+ years of hands-on experience in construction, estimation, and/or quality control activities. * Current Journeyman License or ability to obtain within 6 months of hire. * Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards. * Experience with receiving, production, shipping and quality processes. Compensation for the QC Inspector: * $75,000 - $85,000 (based on experience) * Monthly cell phone allowance * Comprehensive benefit package; Cigna Medical, Cigna Dental, Vision, 401k w/ ADP, PTO, paid holidays, Sick Leave as required by law, paid holidays This job opens for applications on 12/12/2025. Applications for this job will be accepted for at least 30 days from the posting date. #LI-LS3 #LI-ONSITE Keywords: 401k, 401k match, pto, paid time off, holiday, medical, dental, health, culture, ts/sci, top secret, government clearance, security clearance, ssbi, secret clearance, dod clearance, department of defense, army, navy, military, marines, air force, electrician, electronics technician, electronics tech, cctv, closed circuit tv, closed-circuit tv, closed circuit television, closed-circuit television, cat5, cat 5, cat6, cat 6, ids, acs, Hirsch, identiv, bosch, radionics, radionic, bvms, alphone, intercom, airphone, fft, divar, installation, field operation, field engineer, site survey, field tech, field technician, jha, aha, pfw, safety plan, pitco, cabling, pulling cables, equipment rack, information technology, i.t., infralink, lenel, software house, intrusion detection system, access control, maglock, vms, tested wire, communication technician, communications technician, installation, retrofit, communication equipment, communications equipment, pulling cable, cable pulling, site surveys, copper, fiber optic, fiberoptic, fiber cable, optic cable, copper cable, ancillary communications, communication system, communications system, structured cable plant, bicsi, rated copper, optic cable, horizontal cabling, horizontal copper, cable testing, testing cable, anaerobic, fusion splicing, splicing, riser cable, outside plant, osp, osp installation, prefab, prefab assembly, conduit, floor sleeves, bluebeam, blue beam, fluke versiv, cat6a, cat 6a, cat5a, cat 5a, project manager, general contractor, program manager, superintendent, construction, construction manager, primavera, p6, primaverap6, primavera p6, bluebeam, deputy leader, telecom, telecom manager, telecommunications manager, telecom project, telecommunications project, pkom, ms project, Microsoft project, isp copper, distributed antenna system, cctv, outside plant, inside plant, isp, osp, fiber optic, structured cabling, budget, telecom systems, telecom system, telecommunications system, telecommunication system, financial management, project team, manpower, material budget, autocad, project documentation, cash flow, construction management, critical path method, cpm, cpm scheduling, general contractor schedules, telecom scope, telecommunication scopes, low-voltage, low volt, low voltage, quality control, quality assurance, quality control inspector, quality control specialist, quality assurance inspector, quality assurance specialist, qc specialist, qc inspector, construction inspector, qa specialist, qa inspector, electrician, master electrician, journeyman, journeyman electrician, journeyman license, master license, electrician master, electrician journeyman, rfp, request for proposal, inspection, installation checklist, quality issues, quality issue, bim models, bim model, building information modeling, building information, building info, building modeling, nec, national electrical code, neta, international electrical testing association, nec codes, neta codes, electrical standards, electrical regulations, quality control inspection, qc inspections, qc inspection, quality assurance inspections, quality assurance inspection, qa inspection, qa inspections

Geotechnical Engineering Firm in Owings Mills Maryland seeking construction inspectors with materials testing experience for Public Works, Aviation, and Commercial assignments. Current NICET, WACEL, MARCTP, CWI, NACE, and/or ACI certifications would be necessary for soils, concrete, masonry, asphalt, rebar and other materials credentials. Special Inspections would require a combination of certifications that would allow candidate more senior opportunities. Projects throughout Maryland, DC and Virginia. Will provide additional training to motivated candidates. Opportunities for advancement based on attitude. Good writing and communication skills, dependable automobile and clean driving record a must. Pay commensurate with experience and certifications. EOE Salary Description Based on level of experience

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Essential Duties and Responsibilities Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. Ensure compliance with safety standards and proactively report any unsafe conditions. Participate in pre-task planning, submittal reviews, and material/equipment verifications. Verify and document corrective actions and non-conformance resolutions. Support audits and final inspections for project closeouts. Knowledge, Experience and Skill Requirements High school diploma or equivalent; technical certification or associate degree preferred. Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. Strong working knowledge of construction methods, materials, codes, and QA/QC standards. Excellent documentation, organizational, and communication skills. Proficient with basic computer applications (Word, Excel, QC software). Must be able to pass security clearance and background check as required by federal contracts. Physical, Environmental and Sensory Requirements Work may be performed at active construction sites in varying weather conditions. Frequent travel may be required to support multiple task orders across a geographic region. Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. Disclaimer We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits.  Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Title: Quality Control Inspector Shift: 1st Shift Duration: Contract Temp-to-Hire Pay Rate: $23 - $33/hr (depending on experience) Benefits: Optional benefits available while on contract; full benefits upon permanent hire Position Overview: We are currently seeking a Quality Control Inspector for a rail car manufacturing facility located in College Park, MD. This is a hands-on role performing visual and dimensional inspections on rail car parts and assemblies to ensure compliance with strict quality standards.Responsibilities: • Inspect rail car parts and sub-assemblies for conformance to quality standards • Perform visual and dimensional inspections using tape measures, calipers, micrometers, scales, and other tools • Follow engineering drawings, written procedures, and verbal instructions • Record inspection results in reports with a high degree of accuracy and detail • Work with both English and Metric measurement systems • Interpret engineering drawings and perform inspections across all phases of assembly including: - Part Fabrication - Receiving - Metal Matching - Sub Assembly - Shell Assembly - Truck Assembly & Test - Interior and Cab - Exterior - Under-floor - SourceRequired Skills & Qualifications: • Minimum of 2 years of QC inspection experience, preferably in a manufacturing environment • Strong mechanical aptitude and attention to detail • Ability to independently perform final inspection on an entire rail car • Proficiency with inspection tools including tape measures, calipers, and micrometers • Comfortable working in an active shop environment • Physically capable of lifting up to 40 lbs and climbing stairs and ladders Work Environment: This role is based in a rail car production facility with both indoor and outdoor work areas. Strict safety protocols and quality standards are enforced.About Us: Top Prospect Group, established in 2010, is a leading technical staffing firm connecting top talent with premier clients. In 2023, TPG joined HW Staffing Solutions, expanding its reach and services across the professional and technology sectors.Interested candidates, please submit: • A clean copy of your resume • Salary expectations • Availability and at least one professional reference#INDTPGSHELTON

Job Description Who Are We? At Parry Labs we believe the modern combat advantage relies on the speed and scale of open systems. We're redefining the edge of the increasingly ever-changing battlespace by delivering game changing capabilities to our warfighters through digital engineering, software, and hardware solutions that are essential to our core of being a Digital Systems Integrator. Born digital and agile, Parry Labs is building a winning team to be the premier provider for Next Generation Mission Systems Integration across air, land, sea, space and cyber. Are you ready to be an instrumental part of experts in the industry? Join us in the innovation of integration at Parry and apply to help develop the technologies of tomorrow while reaching new heights in your career today. About the Job The Quality Inspector ensures that all products and processes meet established quality standards, specifications, and compliance requirements. They are responsible for performing inspections at various stages of production, identifying defects or non-conformities, and documenting findings to drive continuous improvement. Collaborating closely with production teams, Quality Inspectors play a key role in maintaining product integrity, preventing errors, and ensuring customer satisfaction. This role requires a keen eye for detail, knowledge of quality standards, and the ability to follow procedures to identify and address issues efficiently. This is a six (6)-month contract position. Duties & Responsibilities Perform incoming / receiving inspections on all products to ensure that external, internal and dimensional aspects meet quality standards. Track work throughout the assembly lab, ensuring in process and final inspections are complete and proper documentation is completed. Adhere to calibrated tooling program by verifying all tools utilized in tasks are current and quarantining and submitting expired items for recalibration. Review processing and inspection data for completeness of operations, accuracy of data, traceability of product and materials, and disposition of non-conforming product. Assist with the implementation and maintenance of quality programs as required. Identify, quarantine and report any work that does not quality requirements. Assist with the tracking of non-conformance reports, and corrective / preventative actions. Collaborates with the quality and production departments to determine approaches and methods to improve overall quality of work. Interpret and check work instructions and assembly prints, both hard copy and digital for completeness and errors. Other duties as assigned. Required Qualifications 3+ years of QA Inspection experience, preferably on electro-mechanical assemblies. Able to read and understand mechanical and electrical drawings along with electronic circuit board assembly drawings and procedures. Good communication and interpersonal skills. Good or corrected eyesight for visual inspection. Organized work habits and attention to detail. Experience with working in an ESD environment. Experience with IPC-A-610, IPC-A-620 preferred. Experience with CostPoint ERP is a plus. Why Join Parry Labs? At Parry Labs, we foster a culture of curiosity and collaboration. Employees are given the autonomy to leverage their skills in creating state-of-the-art tech solutions that aid in the protection of the American Warfighter. We encourage new and bold ideas that push the status quo. It is this entrepreneurial spirit that drives us. Parry Labs will support you with workplace flexibility, a commitment to the health and well-being of you and your family and provide opportunities to work with a purpose. We are committed to supporting your success in both your professional and personal lives with benefits such as education assistance and unlimited paid time off, just to name a few. No One Has Time for Long Job Applications! We completely understand, that is why we have made the application process easy. We promise. This will be simple. Accessibility/Accommodation: If because of a medical condition or disability you need a reasonable accommodation for any part of the employment process, please send an e-mail to **************** or call ************** to let us know the nature of your request and contact information.

Job Description Netzer Metalworks is currently hiring Quality Control Inspectors Medical and Dental Benefits, 401k, Paid Holidays Climate controlled facility. 5 years + experience recommended. Quality Control Inspectors monitor the quality of incoming and outgoing products or materials. Inspectors, are tasked with conducting tests, analyzing measurements, and overseeing production processes. • Inspecting machined parts and other finished goods for conformance to customer-defined standards. • Accurately document the results of all testing and inspections in accordance to AS9100 standards. • Maintain controlled electronic documents and test records in a timely and accurate manner. • Coordinate the calibration of all company measurement and test equipment. • Performs other duties as assigned to maintain efficiency throughout the company. • Minimum of 1- 2 year's inspection experience in a machine shop / manufacturing environment. • Ability to interpret engineering drawings. • Ability to use Standard measuring Equipment i.e. Micrometers, Calipers, Height Gauges. • Experience with PC-DMIS with CMM is a plus. • Familiarity with ISO standards a plus Powered by JazzHR 7xgenrQdEN

Polymer Concepts Technologies PBY, Inc. is looking to hire a 2nd shift and a 3rd shift Aerospace Quality Inspector to our Hanover, PA team doing business as Kaydon Ring and Seal ("KRS"). KRS is responsible for Aerospace and Industrial seal applications with a global responsibility for Sales, Manufacturing, Business development, Product and Process Development. KRS has a customer portfolio that includes all major players in the Aerospace industry. Our business is fully customer focused, with products specifically designed for a jet engine application, produced in small quantities and small lots on highly flexible equipment. Extreme product range fragmentation, complex product design, very high-quality standards and traceability requirements are the peculiarity of KRS. Aerospace Quality Inspector (2nd and 3rd shift) will support operations by inspecting in process parts or conduct final inspections of aerospace seals. Job Role and Responsibilities: Perform inspection steps as outlined on inspection sequence and drawings on aerospace and industrial components. Use prints, sketches, process sheets, etc. to ensure work is acceptable withing specification and within conformance. Perform quality testing as required to ensure compliance with specifications. Visually inspect product. Work from oral and written instructions, blueprints, sketches and process sheets. etc. Use precision measuring instruments (e.g., calipers, micrometers, etc.) to assure conformance to known standards. Maintain records and paperwork. Assure work areas are kept in a neat, safe, clean and orderly fashion. Notify supervision of problems or difficulties. Follow all plant safety rules and regulations along with company policies & procedures. Use a variety of equipment to perform checks based on assignment Seals department will use CNC Milling machines, lathes, drill press, segment machines, key slot, burnish machines, etc. Rings department will use micrometers, air gages, indicators, crown gages, optic scope, grove gages, CMM machines, comparators, etc. NOTE: Roles are safety sensitive positions. Job Education, Experience and Requirements: High School Diploma or GED. Minimum of 3 years applied training working within manufacturing quality role. Minimum 1 year working with precise measuring equipment and devices with tight tolerances. Ability to read and understand dimensional blueprints. Refers to supervisor for clarification of priorities, objectives, or policies. Ability to train on any shift. Annual eye exam to ensure ability to meet requirements of quality department. Must be legally authorized to work in the US. 2nd shift hours, M-F, 3P to 11P 3rd shift hours, M-F, 11P-7A (Sunday night start-up) All hourly employees will be part of the United Steelworkers Union (USW) Factory Perks: Starting wage $27.83/hour plus $.75/hour shift differential, and hour wage increases every 9-months in addition to annual compensation increases! No mandatory overtime! Temperature controlled work environment! 12 scheduled holidays and 2 floating holidays! Weekly compensation! Benefits on 1st of the month following 30-days of employment! Company paid dental for you and your dependents! PPO medical plan contribution for employee only coverage $15/week! 401k Company defined contribution 3% of eligible wages (No vesting period)!

Full-time Description The Quality Control Inspector - Receiving Inspection is responsible for performing incoming inspection of purchased components, materials, and assemblies in accordance with Quality Control Instructions (QCIs), drawings, and sampling plans. The position ensures that only conforming material is released for use in production by verifying dimensional and visual characteristics using standard hand measurement tools. The Inspector coordinates with the QC Lead - Receiving Inspection and Supplier Quality Supervisor to ensure inspection priorities are met and any non-conforming conditions are properly identified, documented, and escalated. This position plays a key role in verifying supplier quality. ESSENTIAL DUTIES: Pull products awaiting inspection from designated receiving areas in accordance with established procedures. Inspect incoming materials, components, and assemblies following the applicable Quality Control Instruction (QCI) and sampling plan. Perform dimensional, visual, and attribute inspections using hand measurement tools (micrometers, calipers, bore gages, thread gages, depth gages, etc.). Verify conformance of materials and supplier provided documentation to part drawings and specifications. Identify and clearly tag inspected products as accepted, rejected, or on hold, and record disposition in the ERP system. Release accepted product into inventory or production following system procedures. Escalate or initiate non-conformance documentation for any defects, deviations, or suspect conditions found during inspection. Communicate inspection results and issues to the QC Lead - Receiving Inspection or Supplier Quality Supervisor in a timely manner. Maintain proper organization of inspection areas and ensure product traceability throughout the inspection process. Support inventory control by moving material to appropriate staging, quarantine, or storage areas as directed. Assist in maintaining calibration verification of hand measurement devices and report damaged or out-of-tolerance equipment. Other duties as assigned CORE COMPETENCIES: Accuracy and Attention to Detail: Performs inspections consistently and identifies non-conforming conditions. Technical Proficiency: Skilled in use of precision hand measurement tools. Accountability: Ensures inspection results are accurately recorded and product is properly identified and released. Communication: Escalates issues promptly and communicates clearly with Leads, Supervisors, and Materials personnel. Teamwork: Works cooperatively with Supplier Quality, Materials, and Operations to maintain efficient material flow. WORKING ENVIRONMENTAL CONDITIONS: May be exposed to moderate heat, light dust, fumes, extreme temperatures, noise and hazards such as electrical shock or gases. Some outside assignments could involve exposure to adverse weather conditions. Adequate hearing protection is required for 85 decibels and above. SUPERVISORY RESPONSIBILITY: This position does not require any supervisory duties. SCHEDULE: 8-hour Day Shift Monday through Friday The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. Requirements QUALIFICATIONS: Minimum 1-2 years of quality inspection or manufacturing experience preferred. Ability to read and interpret basic product drawings and part specifications or ability to learn this skill Ability to use precision hand measurement tools (micrometers, calipers, gages) or ability to learn this skill Computer literacy with ERP or quality data entry systems preferred. Strong communication skills and ability to follow detailed instructions.

🕒 Work Hours: 8:00 AM to 4:30 PM, Monday through Friday 💲 Pay Range: $19 - $24 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is looking for a Quality Technician to join their Boss Division in Chestertown, MD! In this role, you will be responsible for in-process audits in production, inspecting and approving incoming materials, and managing calibration of gauges. This position is ideal for someone who takes pride in precision and has a strong background in inspection, measurement, and metrology. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. 🚚 What You'll Do: Inspect and approve incoming materials, in-process production, and finished goods against engineering drawings and specifications. Perform visual and dimensional inspections using height gages, calipers, micrometers, optical comparators, and other precision measurement tools. Document inspection results through reports, logs, and database entries, including rework and scrap tracking. Communicate nonconformances to affected parties and follow up for required adjustments. Issue Corrective Actions where appropriate based on internal guidelines. Maintain and manage all production gauges; performing in-house calibration where possible and coordinating third-party calibration when necessary. Verify proper operation of gauges; manage inspection and repair as required. Ensure compliance with company quality standards, safety practices, and regulatory requirements. Maintain SOPs for the Quality department, making revisions and updates as needed. Assist with auditing internal work procedures and making recommendations to address non-conformances. Participate in continuous improvement efforts to enhance quality systems and reduce rework. 🎯 What We're Looking For: High school diploma or equivalent required; Associate degree in STEM or related coursework preferred. 1-3 years of experience in a quality, inspection, engineering or manufacturing role is preferred. Some experience in reading blueprints and using measurement tools is required. Strong working knowledge of mechanical measurement equipment such as calipers, micrometers, height gauges and thread gauges. Familiarity with engineering drawings, blueprints, and industry specifications such as ANSI, ASTM, API and 3A. Familiarity with quality documentation, reporting, and data entry. Detail-oriented, with strong organizational and communication skills. 🌟 What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Paid time off Glenshaw, PA $18+ for entry level, $2/hr shift differential for 2nd shift work Shift Time: 12:30PM - 8:30PM Reports to: Quality Manager FLSA Status: Non-exempt, full-time hourly Health, Dental, Vision, PTO, 401k benefits! Job Summary: The Quality Inspector ensures that products and materials meet company and customer standards throughout the manufacturing process. This role involves inspecting products, conducting measurements, and collaborating with production teams to maintain quality control. Qualifications & Competencies: • High school diploma or general education degree (GED) required. • Strong understanding of basic math, measurement, and statistical concepts. • Ability to read and interpret quality standards and documentation. • Experience following quality procedures and legal/customer requirements. • Proficiency in Microsoft Office; ability to learn IQS software. • Strong attention to detail with the ability to follow verbal and written instructions. • Excellent communication and interpersonal skills. Essential Duties, Responsibilities (Other duties may be assigned): • Inspect in-process production using visual and measurement tests, ensuring specifications are met. • Perform first-piece sign-offs, spot audits, and final inspections. • Review customer quality requirements, including drawings, inspections, and reports. • Maintain and file retained production samples. • Conduct layered process audits, manufacturing process audits, and quality management system (QMS) audits. • Assist with Production Part Approval Process (PPAP) for automotive customers. • Support additional quality-related tasks as assigned. The physical requirements of this role include: • Ability to reach with hands and arms. • Occasionally stand, walk, climb, kneel, and crouch. • Lift/move up to 25 lbs regularly and up to 50 lbs occasionally (with assistance). • Must have close, distance, color, and peripheral vision, along with depth perception. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Compensation: $18.00 - $20.00 per hour About Us AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States. We have been providing IT solutions to customers from different industry sectors, helping them control costs and release internal resources to focus on strategic issues. AHU Technologies INC. was co-founded by visionary young techno-commercial entrepreneurs who remain as our principal consultants. Maintaining working relationships with a cadre of other highly skilled independent consultants, we have a growing number of resources available for development projects. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.

Thales Defense & Security, Inc. (TDSI) Headquartered in Clarksburg, MD, is a U.S. company that has been serving domestic and international defense Air, Land and Sea domains for 60 years. With over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI's key technologies include tactical handheld radios, expeditionary satellite terminals, helmet-mounted displays, optics and target recognition capability, advanced radars, undersea sensing and missile systems. Lives depend on what we do! Top Benefits (Subject to terms of applicable policies/plans) * Competitive Salary * Yearly Incentive Compensation Program * Medical insurance for self and eligible family members * Generous 401(k) program - up to 7% company contribution and 100% immediate vesting * Tuition Reimbursement * Paid wellness, vacation, and holiday leave * Paid maternity, paternity, and parental leave * 9/80 Work Schedule (every other Friday off) We currently have an opening for a Senior Quality Control Inspector - 1st or 2nd Shift in our Clarksburg, MD Campus. The Senior Quality Control Inspector will report to the Manager of Procurement Quality Assurance. First shift hours are 7:00 am to 4:30 pm. Second shift hours are 2:30 pm to 12:00 am. Second shift candidates must be able to train on first shift for 30 days. Responsibilities * Inspect electrical assemblies in accordance with IPC-A-610 and J-STD-001 standards. * Inspect mechanical assemblies in accordance with technical documentation. * Able to work unsupervised in performing inspections. * Read and interpret mechanical drawings. * Interface with the Enterprise Resource Planning system. * Communicate non-conforming material status. * Interface with Quality Engineering in support of problem resolution and continuous improvement. * Maintain high ethical standards, including compliance with all company procedures. Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * U.S. Citizenship required. - Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. * Excellent verbal and written communications - Fluent in English. * High school diploma required. * 4-8 plus years' experience in quality, manufacturing or related technical environment. * Experience in inspecting electrical / mechanical assemblies. * Knowledge of IPC standards. * IPC-A-610 and J-STD-001 certifications required. * Ability to read and understand technical data documentation. * Experience with ERP systems; SAP S/4 Hana a plus. * Computer literate. * Ability to comply with all Company guidelines, policies, procedures and embrace Company Core Values. The hourly pay range for this role is $23.40 - $29.90 USD along with a target incentive compensation plan (ICP) of 3%. The pay range provided is a good faith estimate representative of the experience level for the role described above. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. For specific questions about this job posting, candidates may contact talent acquisition at *********************. Thales Defense & Security, Inc. is committed to non-discrimination as applicable under federal, state and local laws. We are an E-Verify Employer. If you need an accommodation or assistance in order to apply for a position with Thales Defense & Security, Inc., please call Human Resources at ************. #LI-JK1 #LI-Onsite

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions INSPECTION TECHNICIAN I/II Based at Rocket Lab's site in Silver Spring, Maryland, the Inspection Technician will be responsible for executing various aerospace inspections. You will support the Quality Inspector Supervisor and Space Systems organization. In this role, you'll inspect mechanical and electrical components for spacecraft assemblies, operate precision tools like CMMs and micrometers, and assemble flight mechanisms using production drawings. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! (Please note: this position can be hired at the Inspection Technician I or Inspection Technician II level) WHAT YOU'LL GET TO DO: Inspect mechanical and electrical components before use in traceable spacecraft assemblies Use and maintenance of Coordinate Measurement Machines (CMM), calipers, micrometers, gages, comparators, hardness testers, and other common mechanical inspection tools. Create Standard Operating Procedures for specific mechanical parts. Communicate findings through written standardized documentation and verbal discussion. Assemble space flight mechanisms following written production drawings and procedures. Idea generation of potential process improvements. Shipping and receiving components according to standard company procedures. YOU'LL BRING THESE QUALIFICATIONS AS AN INPSECTION TECHNICIAN I: 2+ years of quality inspection experience in a highly regulated production or manufacturing environment Familiarity with common manufacturing processes. Familiarity with common aerospace inspection tools, e.g. calipers, multimeters, micrometers, gages, comparators, etc. Familiarity with common aerospace assembly tools, e.g. torque wrenches, force gages, load cells, scales, etc. YOU'LL BRING THESE QUALIFICATIONS AS AN INPSECTION TECHNICIAN II: 5+ years of quality inspection experience in a highly regulated production or manufacturing environment Familiarity with common manufacturing processes. Familiarity with common aerospace inspection tools, e.g. calipers, multimeters, micrometers, gages, comparators, etc. Familiarity with common aerospace assembly tools, e.g. torque wrenches, force gages, load cells, scales, etc. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: At least 8+ years engineering experience in the aerospace industry. Candidate has capacity to comply with the federally mandated requirements of U.S. export control laws. Direct inspection or design experience with parts complying to the ASME Y14.5 standard. Familiarity with use of CMM. Strong technical and mechanical capability. Familiarity with simple electrical schematics and components. Attention to detail necessary to verify inspected components meet required specifications. Integrity and focus to follow and execute procedures. Familiarity with common geometric dimensioning and tolerancing (GD&T) practices. Passion for doing excellent work with mechanisms and physical assemblies. Mechanically inclined and able to troubleshoot basic equipment issues Self-motivated mind-set. Effective verbal and written communication abilities. Desire to work in a small-company environment. ADDITIONAL REQUIREMENTS: Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces #RL1 Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored HSA plan option, dental and vision coverage, 3 weeks paid vacation and 7 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, flex schedule, free breakfast and lunch catered 2x/week, and free snacks/drinks. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (MD Only)$16-$25 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

The Quality Control Inspector, Sr provides senior-level quality assurance and test support for the Program Manager of Positioning, Navigation, and Timing (PM PNT) programs, ensuring compliance with contract specifications, safety standards, and applicable regulations (e.g., DoDI 5000.100, 5000.89, AR 73-1). Responsibilities · Responsibilities include developing and implementing quality control plans, reviewing key program artifacts (SSR, SFR, PDR, CDR, TRR), assisting with documentation development (SOOs, SOWs, PWSs, test plans/reports), and performing comprehensive testing across all phases of development - including cybersecurity, hardware, and software. · Document test results, identify deficiencies, and maintain quality control records to ensure program performance requirements are met. Qualifications Required: · Bachelor's Degree in Business, or related scientific or technical discipline with seven (7) years experience related experience in Test and Evaluation. OR · Four (4) years of related military service experience may be substituted for the degree with seven (7) years experience related experience in Test and Evaluation. · Secret Clearance Company Overview Integral partners with federal defense, intelligence, and civilian leaders to tackle their most important challenges and deliver positive outcomes. Since our founding in 1998, we have helped clients leverage existing and emerging technologies to transform their enterprises, empower growth, drive innovation, and build sustainable success. The forward-leaning solutions we deliver are tailored to each mission with a focus on keeping our nation safe and secure. Integral is headquartered in McLean, VA and serves clients throughout the country. We offer a comprehensive total rewards package including paid parental leave and immediate vesting in our 401(k). Give us a try and become part of a curated group of professionals at Integral Federal! Our package also includes: · Medical, Dental & Vision Insurance · Flexible Spending Accounts · Short-Term and Long-Term Disability Insurance · Life Insurance · Paid Time Off & Holidays · Earned Bonuses & Awards · Professional Training Reimbursement · Paid Parking · Employee Assistance Program Equal Opportunity Employer/Protected Veteran/Disability

We are currently looking for a 1st Shift, Quality Tech, Monday through Friday, to join our VALUES based organization. In this role you will focus on . Responsibilities: * Determine specifications and validate manufactured products and identify quality concerns * Thorough understanding of Work Order tickets & the ability to read and interpret Shop drawings and templates * Identify cause of errors, problems and/or defects * Assist in recommending and developing solutions to address quality concerns and to enhance quality/productivity * Discuss validation results with those responsible for products and recommend corrective actions Qualifications: * 3+ years production line experience in a manufacturing environment; experience as a millwork assembler or master carpenter is a plus. * Ability to follow oral and written communication from supervisor, lead or co-worker * The ability to see details at close range and match or detect differences between colors, including shades of color and brightness. * Must be able to read tape measure Specialty Building Products is the leading distributor of specialty building products in North America. SBP operates under the brands U.S. LUMBER, Alexandria Moulding, REEB Millwork, DW Distribution, Millwork Sales and Amerhart. We serve 45 states in the U.S. and 8 provinces in Canada from over 40 locations. Here at SBP we are a people first organization, our team is built upon strong culture and standards for success. We value your perspective and want to learn more about you with a commitment to laying the foundation for you to build a successful career with us. Join us and EVOLVE your Future at Specialty Building Products! Being a part of SBP you will be eligible for many benefits. Full-Time benefits would include: * Medical, Dental, Vision given on the 1st of the month following 30 days of employment * Company-Paid Life Insurance & Disability * 401(k) with Company Match * Company-Paid Time Off * Paid Holidays & Floating Holidays * Plus many more perks! Serving our communities, we are also committed to our core value of "using our influence to have a uniquely positive impact" on the people that we touch. Through our initiatives we encourage and incentivize our employees to aid fellow employees in need and to better serve our communities and the people we directly influence. We are proud to have the best team in our industry. We have experienced a tremendous amount of growth as a company. This growth has served not only our customer base but has also provided significant opportunities for advancement amongst our employees. Specialty Building Products is an equal opportunity employer. It is our policy of Specialty Building Products not to discriminate in hiring and employment on the basis of race, color, religion, national origin, sex, disability, age, military status, genetic information, or other protected class status in accordance with all applicable federal, state, and local laws.

Job Description Summary/Objective: The Technical Service/Quality Control Technician implements and complies with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications. Essential Functions: Perform specimen tests of concrete from random loads or for special jobs or mixes; prepare test reports as required. Oversee unique jobs to ensure product standards are met, i.e., jobs that have restrictive specifications or require large quantities of material to be delivered. Perform aggregates and batch plants tests including daily graduation and moisture tests on all concrete being produced for State and spec projects. Certify concrete loads being delivered to "spec" jobs in accordance with SHA specifications; check loads for proper procedure and time of mixing. Perform quality assurance tests on trial batches of new concrete mix designs under close tolerance conditions and make adjustments until mixture meets specifications. Troubleshoot problems with customers, analyze and evaluate specific conditions, situations, quantities, etc., and provide appropriate resolution. Provide technical assistance and training to plant managers, equipment and yard operators, and drivers when requested. Perform laboratory tests including gradation, moisture, lightweight particles and specific gravity tests on aggregates. Select samples for materials that need certification by an outside laboratory or that are beyond the department capability. Transport these samples to the testing agency. Perform additional tasks such as cleaning facilities to ensure safety and cleanliness, moving equipment and materials, and completing tasks for other positions when incumbent is absent. Assist the Technical Services Manager and Assistant Manager as needed. Other duties as assigned. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/office and outdoors/field Exposure to dust and fumes/offensive smells. Exposure to chemicals such as concrete, chemical admixtures. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 50 lbs., repetitively lift 50 lbs., carry approximately 50 lbs., and push/pull approximately 75-100 lbs. Reach overhead and reach away from the body. Minimal kneeling, squatting and climbing may be required. Sit 3 hours per day, stand 5 hours per day, and walk 2 hours per day. ADDITIONAL QUALIFICATIONS Experience: Laboratory testing experience in ready-mix concrete or aggregates preferred. Special Skills: Written communication, verbal communication, and basic mathematical skills. Ability to use a computer and iPad, including Microsoft Office. Ability to use the company dispatching system. Ability to compute basic material calculations. Excellent interpersonal skills. Able to exhibit a high level of confidentiality. Excellent organizational skills. Must be able to identify and resolve problems in a timely manner. Certifications: Valid Driver's License. ACI Level 1 certification (must be obtained within 1 year of assuming position). Industry Related Experience or Skills: Background in concrete, construction, mining operations or building materials (preferred). Education Required: High School Preferred Education: N/A Bilingual in Spanish Preferred: Yes Interested in future opportunities with Chaney? Join our Talent Community to get alerts about newly posted positions. Click here to sign up!

Zachary Piper Solutions is seeking a Quality Control Inspector to support operations in Annapolis Junction, Maryland. This role will ensure quality compliance by reviewing documents, leading inspections, and coordinating with stakeholders for successful project delivery. Responsibilities for the Quality Control Inspector include: * Review contract and design documents for compliance and constructability. * Lead 3-Phase QC process and develop installation checklists. * Conduct inspections, manage punch lists, and report quality data. * Coordinate with GC/Owner and resolve quality issues. Qualifications for the Quality Control Inspector include: * Minimum 4 years of experience in construction, estimation, or quality control. * Ability to obtain a state-issued Journeyman License within 6 months of hire. * Proficient in interpreting contracts, drawings, BIM models, NEC codes, and industry standards. * Strong communication, attention to detail, organizational skills, and computer proficiency. * Associate's degree in a technical discipline or equivalent quality-related experience. Compensation for the Quality Control Inspector include: * Salary Range: $75,000 - $85,000 based on years of experience * Benefits: Medical, Dental, Vision, 401k Plan, PTO (Paid Time Off), Holidays, Sick leave as required by law This job opens for applications on 12/15/2025. Applications for this job will be accepted for at least 30 days from the posting date Keywords: Quality Control, Construction, Compliance, Inspections, 3-Phase QC, Contract Review, Document Review, Specifications, Drawings, Submittals, Constructability, Installation Checklists, Punch Lists, Continuous Improvement, Safety Meetings, Project Meetings, GC Coordination, Owner Coordination, Commissioning, NEC Codes, NETA Standards, BIM Models, Estimation, Technical Discipline, Journeyman License, Manufacturing Environment, Quality Processes, Production, Shipping, Receiving, Communication Skills, Attention to Detail, Organization, Computer Literacy, Fast-Paced Environment, Problem Solving, Stakeholder Engagement, Quality Assurance, Field Inspections, Definable Features of Work, Preparatory Meetings, Initial Inspections, Follow-Up Inspections, Data Analysis, Reporting, Construction Standards, Electrical Codes, Industry Standards, Project Delivery, Quality Issues, Resolution, Contractual Requirements, Construction Documents, Safety Compliance, Quality Management, Construction Quality, Technical Expertise, Project Coordination, Quality Monitoring, Risk Mitigation, Quality Documentation, Quality Audits, Quality Planning. #LI-VC1 #LI-ONSITE

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. **Essential Duties and Responsibilities** + Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. + Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. + Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. + Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. + Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. + Ensure compliance with safety standards and proactively report any unsafe conditions. + Participate in pre-task planning, submittal reviews, and material/equipment verifications. + Verify and document corrective actions and non-conformance resolutions. + Support audits and final inspections for project closeouts. **Knowledge, Experience and Skill Requirements** + High school diploma or equivalent; technical certification or associate degree preferred. + Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. + Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. + Strong working knowledge of construction methods, materials, codes, and QA/QC standards. + Excellent documentation, organizational, and communication skills. + Proficient with basic computer applications (Word, Excel, QC software). + Must be able to pass security clearance and background check as required by federal contracts. **Physical, Environmental and Sensory Requirements** + Work may be performed at active construction sites in varying weather conditions. + Frequent travel may be required to support multiple task orders across a geographic region. + Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. + Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. **Disclaimer** **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.