Quality control inspector jobs in Bethesda, MD - 279 jobs

R.W. Warner, Inc is seeking an experienced Quality Control Superintendent to join our team. This position will oversee the quality assurance and quality control (QA/QC) functions on projects for our Electrical Division (Williams Electric) and our Construction Division (Warner Construction). The ideal candidate will have a strong background in commercial and/or industrial electrical construction, a solid understanding of codes and standards, and the ability to lead inspections and documentation to ensure all work meets company and client requirements. Job Duties/Responsibilities: Implement and maintain project-specific Quality Control Plans for electrical installations. Inspect and verify electrical work to ensure compliance with project specifications, drawings, NEC, and applicable codes. Coordinate with project management, engineering, and field teams to identify and resolve quality issues. Perform and document inspections, testing, and verification activities. Manage quality control documentation including checklists and inspection reports. Facilitate and, in some cases, lead pre-installation meetings and provide training to ensure crews understand quality expectations and procedures. Conduct final inspections and ensure proper turnover documentation to the client. Maintain effective communication with clients, subcontractors, and internal teams regarding quality standards and progress. Qualifications 5-10 years minimum experience in electrical construction, with at least 3 years in a QC role. Strong understanding of NEC, industry standards, and electrical system installation practices. Proven experience providing quality control processes on commercial or federal projects preferred. Ability to read and interpret blueprints, schematics, and specifications. Strong organizational and communication skills, with an emphasis on attention to detail. Proficient in Microsoft Office 365 and construction management software (e.g., Procore, Autodesk). OSHA 30, NFPA 70E, and USACE CQM Certifications are preferred and may be required based on project. Valid driver's license with clean driving record Full-Time Target Salary Range is $75k - $95k (salary will be determined based on experience) Work Environment: This position involves both office and field work, including regular visits to active construction sites. Candidates must be comfortable working in a fast-paced environment while maintaining a strong focus on safety and quality. Benefits & Other Offerings Competitive salary based on experience Health, dental, and vision insurance Short-Term and Long-Term Disability Insurance Whole Life Insurance with Long-Term Care PTO and Paid Holidays (We follow the federal holiday schedule) 401(k) Career growth and professional development opportunities Collaborative and supportive work environment *Salary will be based on qualifications and years of experience* Apply on LinkedIn or directly through our company website using this link: Quality Control Superintendent R.W. Warner, Inc. is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace where all individuals are treated with respect and dignity. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Job Title: QC Microbiology Technician I Duration: 12 Months **Day Shift** 100% onsite (lab environment) Shifts: 4/10 (4 days x 10 hours/day) SUN-WEDS 7:00am-6:00pm* Job Description Working with the Quality Control team in supporting our efforts - cancer immunotherapy. This position provides Quality Control microbiological testing for clinical and commercial manufactured product, responsible for product testing, microbial growth promotion testing, utility testing and environmental monitoring. Responsibilities (include but are not limited to): • Perform environmental monitoring of cleanrooms • Collect water samples to ensure all sample collected per schedule and tested on time • Perform and review microbiological assays such as Gram Stain, Endotoxin, Sterility, Microbial Identification, Growth Promotion, Bioburden and Plate Reading • Perform and review visual inspection of final product • Data entry and trend data as needed and prepare slides for management • Assist in investigations regarding out of specifications (OOS) results, address and manage deviations related to micro procedures. • Routine maintenance of lab equipment and lab spaces • Review and approve all final product release test results • Perform other duties as required Basic Qualifications: • AA Degree and 1+ years' experience in Microbiology lab/Environmental Monitoring OR • AA Degree and 2+ years' experience in Microbiology lab/Environmental Monitoring OR Preferred Qualifications: • Experience in the application of microbiological techniques such as environmental air monitoring, water testing, surface monitoring • Experience in aseptic techniques and clean room operations • Ability to gown for entry into Aseptic core and supporting areas, and lift approximately 25 lbs. • Ability to pass vision exam for visual inspection • Knowledge of GMP, SOPs and quality control processes for commercial manufacturing • Proficient in MS Word, Excel, Power Point and other applications • Excellent interpersonal, verbal and written communication skills are essential in this collaborative work environment • Comfortable in a fast-paced small company environment with minimal direction and able to adjust workload based upon changing priorities • Ability to be flexible with schedule, and work overtime as needed

Quality Control Associate, Microbiology & Environmental Monitoring Salary: 55,000 - 75,000 Annually Great opportunity to be part of a dedicated team serving the rapidly expanding gene therapy market. Vector Biomed is a leading supplier of high-quality Lentiviral vectors for research and clinical use. Team members will support cGMP manufacturing in a dynamic small company setting. We are seeking an enthusiastic person experienced in Microbiology and Environmental Monitoring (EM) practices to monitor and support critical manufacturing operations. Duties and Responsibilities: • Perform Environmental Monitoring (EM) and Quality Control (QC) microbiological testing to support cGMP manufacturing (MFG) operations. • Assist in the collection, analysis, and reporting of routine and dynamic EM data. • Assist/support development of new QC testing methods as required. • Adhere to quality standards for job training and ensure GMP compliance. Education & Experience: • Education (Any of): • Associates or Bachelor's degree in relevant field with at least 1 year in a microbiology/ environmental monitoring role. • High school degree with minimum 3 years relevant experience in a microbiology/ environmental monitoring role. • Proficient in routine sampling methods and data collection. • Proficient in data analysis. • Solid judgement and decision making in routine technical situations. Qualifications: • Experience with microbiological and aseptic techniques • Experience with standard laboratory/cleanroom equipment: biosafety cabinets, incubators, etc. • Comfortable working in both general laboratory and cleanroom / gowned setting. • Proficiency in Office365 (Word, Excel, PowerPoint, Teams, SharePoint, OneDrive) required. • Demonstrated team player with effective verbal and written communication skills. Physical Requirements: • Ability to move 20 lbs. required. • While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands; reach with hands and arms. • Must be able to perform repetitive motion activities during working hours. • Must be able to stand during working hours.

Job Announcement Under the direction of the supervisor, performs quality control and assurance of contractor work for the repair, maintenance, and replacement of complex commercial building HVAC and plumbing equipment for a portfolio of over 250 critical commercial buildings comprising of over 12 million gross sq feet of rentable space. Buildings include but are not limited to single story, multi-story and high-rise buildings. The incumbent will provide strong knowledge of commercial building complete mechanical equipment and systems. Other duties include: Ensures all contractor work as well as operations are compliant with the Virginia Uniform Statewide Building Code and state and federal regulation such as Department of Environmental Quality (DEQ), OSHA, and Environmental Protection Agency (EPA). This role requires good physical ability, as the engineer will spend 75% of their day in the field conducting inspections and driving to sites. Employees may perform other related duties to meet the ongoing business needs of the organization. Required Knowledge Skills and Abilities (The knowledge, skills and abilities listed in this specification are representative of the class but are not an all-inclusive list.) Depending on the functional area of assignment: Knowledge of the principles, theory and practice of civil, architectural, and environmental engineering or urban planning; Knowledge of the principles, practices and techniques relating to construction project management and contract administration; Knowledge of computer applications and software (such as CAD) that are associated with the preparation of plans and engineering computations; Knowledge of topographic and construction surveying; Knowledge of common methods and equipment used in engineering design/construction and of inspection methods used in reviewing such work; Knowledge of real property descriptions; Knowledge of environmental testing methods; Knowledge of state and federal laws and regulations regarding solid waste management; Knowledge of Virginia Uniform Statewide Building Code and the codes and ordinances that apply to building construction in Fairfax County; Ability to gain familiarity with the Public Facilities Manual; Ability to work in a team environment; Ability to train and supervise staff; Ability to review construction documents, designs and proposals for costs, design requirements and compatibility with county standards, guides and operational needs; Ability to prepare reports, specifications, and contract documents; Ability to conduct public meetings; Ability to prepare technical reports and to present findings in a clear and concise format; Ability to make accurate drawings and maps; Ability to make accurate computations and neat and accurate field notes; Ability to collect and compile research data. Employment Standards MINIMUM QUALIFICATIONS: Any combination of education, experience, and training equivalent to the following: (Click on the aforementioned link to learn how Fairfax County interprets equivalencies for "Any combination, experience, and training equivalent to") Graduation from a four-year college or university accredited by the Accreditation Board of Engineering and Technologies with a bachelor's degree in the appropriate engineering or architectural field; plus one year of professional experience in the appropriate engineering field. Upon successful completion of three years of professional engineering experience, Engineer II employees are eligible for a non-competitive appointment to Engineer III within the engineering discipline for which they have been trained. CERTIFICATES AND LICENSES REQUIRED: Valid driver's license NECESSARY SPECIAL REQUIREMENTS: The appointee to this position will be required to complete a criminal background check, driving record check, and pre-employment medical evaluation to the satisfaction of the employer. PREFERRED QUALIFICATIONS: Current and valid Master HVAC License Fundamental knowledge of Trane, Siemens, Automated Logic, and Delta Building Automation Controls with 3 years operator experience. 7 years of experience as the lead and accountable person for the maintenance, repair, and operation of complex commercial HVAC equipment in high-rise, mid-rise, and low-rise buildings with a portfolio of over 3 million square feet to include two years of supervisory experience. 3 years of experience supporting and overseeing commercial Facilities Maintenance HVAC contractors and contracts. Demonstrated experience and strong familiarity with commercial building Building Automation Systems in the maintenance, repair, and operation of large commercial building HVAC systems. Experience with the management and oversight of the operations/maintenance of a large physical plant commercial building LEED certified HVAC system energy efficiency. Experience reviewing and managing a commercial building HVAC system maintenance, repair, and operations program with over $2M in annual expenses as the lead, primary and accountable decision maker, and mechanical technical expert. Good verbal and written communication skills. Ability to read and understand HVAC and associated subsystems design documents to include blueprints, building plans, specifications, and warranties. PHYSICAL REQUIREMENTS: Must be able to climb up 12 ft step ladders and extension ladders, fixed wall and roof mount ladders, and cage ladders up to 35 ft as well as climb stairs up to 12 stories. Must be able to bend, stoop, crouch, crawl, balance, and work in tiring and uncomfortable positions. Must have mobility for standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, reaching overhead, grasping, moving equipment, pushing, pulling for extended periods of time while performing work. Good dexterity for hands on work. Specific vision abilities include close vision, distance vision, color vision and depth perception. Ability to hear normal building equipment and alarms and verbal warnings in occupied buildings and building sub-system work areas. Must be able to wear and physically complete necessary tasks while wearing OSHA approved and required Personal Protective Equipment (PPE) to include but not limited to safety shoes, safety gloves, hardhat, safety clothing, ear protection, respirator, etc. All duties performed with or without reasonable accommodations. SELECTION PROCEDURE: Panel interview and may include exercise. Fairfax County is home to a highly diverse population, with a significant number of residents speaking languages other than English at home (including Spanish, Asian/Pacific Islander, Indo-European, and many others.) We encourage candidates who are bilingual in English and another language to apply for this opportunity. Fairfax County Government prohibits discrimination on the basis of race, color, religion, national origin, sex, pregnancy, childbirth or related medical conditions, age, marital status, disability, sexual orientation, gender identity, genetics, political affiliation, or military status in the recruitment, selection, and hiring of its workforce. Reasonable accommodations are available to persons with disabilities during application and/or interview processes per the Americans with Disabilities Act. TTY . EEO/AA/TTY. #LI-RS1

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We are looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we 'II support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you 'II have the resources, support, and team to do some of the best work of your career. Start your future with a new mission, Northrop Grumman Mission Systems. Northrop Grumman Mission Systems, located in Sykesville, MD has an immediate need for a Quality Inspector. A Quality Inspector performs complete quality inspection operations on a variety of purchased or manufactured materials, hardware, electrical components, electro-mechanical assemblies/systems and manufacturing processes using drawings, military specifications, process specifications and contractual requirements as well as internal (PROP) procedures that are applicable. Roles and Responsibilities: Evaluate completed sub-assemblies or systems to determine the cause of defective appearance or malfunctions. Recommend design changes and other corrective actions and war room requests, working with Engineering to adhere to contractual and drawing requirements. Perform inspections using tooling and check lists for the complete inspection of sub-assemblies and systems. Interface with manufacturing operations and engineering personnel to improve processes and document issues. Conduct inspections of complex components to determine, from visual and dimensional checks, piece/part conditions that contribute to, or cause, defects. Conduct investigations to detect conditions affecting functional aspects of the system and recommend solutions to eliminate current and/or future malfunctions. Perform first-piece, patrol, sampling, physical configuration audit, and final inspection on a variety of complete electromechanical LRUs and systems. Visually inspect for appropriate electrical assembly specifications and standards. Determine and evaluate the cause of rejections and recommend changes in tooling/equipment, functions and/or materials to improve the quality of the completed product. Review procedures and techniques used to inspect materials, parts, units, and/or systems that improperly passed inspection, to make necessary corrections to prevent recurrence. Perform ISO Audits as required by audit coordinator after receiving certification. Submit contract end item product as required. Customer and government (DCMA) interface are required for in-process inspections through final inspections as well as contract end item submittals and final pack/shipping processes. This position requires a secret clearance as the work will be performed in a secure area. Basic Qualifications: High School Diploma and 2 years of related experience. Quality, inspection or electromechanical assembly experience. A Department of Defense (DoD) Secret clearance is required. U.S. citizenship required. Preferred Qualifications: SAP experience. Drawing review experience. Knowledge of geometric tolerancing. Primary Level Salary Range: $44,825.00 - $98,131.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Blue Halo is seeking a Receiving Inspector to become a part of a dynamic Quality team, reporting directly to the Quality Manager. This role is responsible for inspection at BlueHalo's Albuquerque site. The candidate will perform Inspection of purchased parts and materials for conformity to standards, specifications, and processing requirements as materials are received from external providers. This person shall determine or assist in determining methods, sequences, and procedures necessary for inspection. Works from released drawings, procedures, and specifications. Adapts inspection measuring devices and procedures where necessary. The candidate would be required to communicate between multiple departments and report key information to stakeholders in a timely manner. Must be dedicated to the quality function and possess a drive to enhance the quality of both the product and processes. Essential Functions: Good team player who can work efficiently with minimal supervision. Maintain a clean and organized workspace. Able to comply with all health, safety, and security regulations. Prioritize daily inspection requirements. Excellent attention to detail and critical thinking skills. Review and comprehend engineering and program requirements such as engineering drawings, models, and specifications, and perform inspections using tools such as micrometers, gauges, microscopes, micrometers, telescope gauges, and optical comparators. Verifies specifications referencing purchase orders, blueprints, drawing or inspection instructions, and checklists. Apply sampling principles to material inspections. Makes pass/fail decisions on inspected goods. Maintains records of results Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits. Prepare inspection reports regarding conformance, initiate nonconformance reports, and quarantine material when needed. Create discrepancy reports for suspect or identified counterfeit parts. Perform inspections per IPC-610/620. Perform First Article Inspections, incoming inspections, and final inspections. Assist with calibration of quality control equipment. Calibration Technician backup. Able to train a quality inspection level 1 and 2. Foreign object debris/damage point of contact. Run statistical studies such as reproducibility and capability. Familiar with statistical process control methodologies. Prepare and maintain test data for review. Identify areas for quality control improvements. On material returned from repair, confirm repairs and product quality. Minimum Qualifications Familiar with ISO and AS Quality Management Systems. Experience with inspection tools (calipers, micrometers, height gauge, etc.). Experience reading and understanding engineering drawings, aerospace certifications, and test reports. Experience receiving packages, data entry, organizing, and scanning documentation. Familiar with ESD and proper material handling procedures. Qualified candidates should possess a high school diploma or equivalent. Basic computer skills, including Microsoft Office applications. Technical Math Basic shop math Measurement systems (units and conversion) Numeric conversions (decimals, fractions, scientific notation) Physical Demands The employee must occasionally lift, carry, pull, push, or move up to 25 pounds unassisted. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Required Education and Experience High School Diploma or Equivalent. IPC-610-620 Certified or able to be re-certified. Preferred Education and Experience: 6+ years of inspection, precision, mechanical, or metrological inspection experience. Experience with the use of metrology tools and gauges. Experience within the aerospace, automotive, semiconductor, or electronic fields. Ability to read and interpret engineering drawings and specifications. Clearance Level No Clearance The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Zachary Piper Solutions is looking for a Quality Control Inspector to join a design services company for mission critical systems. This is a FULL TIME job and onsite in Jessup, MD. Essential Duties of the QC Inspector: * Contract document review for compliance: RFP, Specs, Drawings, Submittals, etc. * Review design documents for constructability and contract compliance. * Implement 3-Phase Quality Control approach: Preparatory meetings, Initial inspections, and follow-up inspections. * Participate in daily safety meetings to discuss Quality issues and concerns. * Attend all required project meetings to provide resolution to any Quality issues from Owner/QC. * Manage and assist in resolving all Quality or Commissioning punch-lists. Qualifications of the QC Inspector: * 4+ years of hands-on experience in construction, estimation, and/or quality control activities. * Current Journeyman License or ability to obtain within 6 months of hire. * Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards. * Experience with receiving, production, shipping and quality processes. Compensation for the QC Inspector: * $75,000 - $85,000 (based on experience) * Monthly cell phone allowance * Comprehensive benefit package; Cigna Medical, Cigna Dental, Vision, 401k w/ ADP, PTO, paid holidays, Sick Leave as required by law, paid holidays This job opens for applications on 1/5/2026. Applications for this job will be accepted for at least 30 days from the posting date. #LI-LS3 #LI-ONSITE Keywords: 401k, 401k match, pto, paid time off, holiday, medical, dental, health, culture, ts/sci, top secret, government clearance, security clearance, ssbi, secret clearance, dod clearance, department of defense, army, navy, military, marines, air force, electrician, electronics technician, electronics tech, cctv, closed circuit tv, closed-circuit tv, closed circuit television, closed-circuit television, cat5, cat 5, cat6, cat 6, ids, acs, Hirsch, identiv, bosch, radionics, radionic, bvms, alphone, intercom, airphone, fft, divar, installation, field operation, field engineer, site survey, field tech, field technician, jha, aha, pfw, safety plan, pitco, cabling, pulling cables, equipment rack, information technology, i.t., infralink, lenel, software house, intrusion detection system, access control, maglock, vms, tested wire, communication technician, communications technician, installation, retrofit, communication equipment, communications equipment, pulling cable, cable pulling, site surveys, copper, fiber optic, fiberoptic, fiber cable, optic cable, copper cable, ancillary communications, communication system, communications system, structured cable plant, bicsi, rated copper, optic cable, horizontal cabling, horizontal copper, cable testing, testing cable, anaerobic, fusion splicing, splicing, riser cable, outside plant, osp, osp installation, prefab, prefab assembly, conduit, floor sleeves, bluebeam, blue beam, fluke versiv, cat6a, cat 6a, cat5a, cat 5a, project manager, general contractor, program manager, superintendent, construction, construction manager, primavera, p6, primaverap6, primavera p6, bluebeam, deputy leader, telecom, telecom manager, telecommunications manager, telecom project, telecommunications project, pkom, ms project, Microsoft project, isp copper, distributed antenna system, cctv, outside plant, inside plant, isp, osp, fiber optic, structured cabling, budget, telecom systems, telecom system, telecommunications system, telecommunication system, financial management, project team, manpower, material budget, autocad, project documentation, cash flow, construction management, critical path method, cpm, cpm scheduling, general contractor schedules, telecom scope, telecommunication scopes, low-voltage, low volt, low voltage, quality control, quality assurance, quality control inspector, quality control specialist, quality assurance inspector, quality assurance specialist, qc specialist, qc inspector, construction inspector, qa specialist, qa inspector, electrician, master electrician, journeyman, journeyman electrician, journeyman license, master license, electrician master, electrician journeyman, rfp, request for proposal, inspection, installation checklist, quality issues, quality issue, bim models, bim model, building information modeling, building information, building info, building modeling, nec, national electrical code, neta, international electrical testing association, nec codes, neta codes, electrical standards, electrical regulations, quality control inspection, qc inspections, qc inspection, quality assurance inspections, quality assurance inspection, qa inspection, qa inspections

Mindlance is a national recruiting company which partners with many of the leading employers across the country. Feel free to check us out at ************************* Job Description Job Title: QC Inspector Location: Baltimore, MD Duration: 2+ Years Responsibilities: Inspector is in a high visibility position and therefore must always present themselves in a professional manner, with honesty and integrity. Must possess good interpersonal skills and willingness to learn. Observe, monitor and document proper completion of the following tasks in accordance with BGE specifications: Site survey Gas meter relocation To exterior Elevated Bollard installations Bucket Core drilled Bolt Down Elevate to Meter Engineering & Standards unique protection situations Coordinate with County/Municipal building inspectors for permits and final inspections Resolve customer questions and elevate to Field Supervisor as necessary unresolved issues Perform and document field safety audits. Proficient in using utility maps and locating equipment in the field. Must have 5+ years of QC inspection experience in a utility setting Gas OQ certified and/or Master Plumber/Gas Fitter are preferred Additional Information Thanks & Regards' ___________________________________________________________________________ Vikram Bhalla | Team Recruitment | Mindlance, Inc. | W: ************ All your information will be kept confidential according to EEO guidelines.

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. **Essential Duties and Responsibilities** + Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. + Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. + Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. + Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. + Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. + Ensure compliance with safety standards and proactively report any unsafe conditions. + Participate in pre-task planning, submittal reviews, and material/equipment verifications. + Verify and document corrective actions and non-conformance resolutions. + Support audits and final inspections for project closeouts. **Knowledge, Experience and Skill Requirements** + High school diploma or equivalent; technical certification or associate degree preferred. + Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. + Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. + Strong working knowledge of construction methods, materials, codes, and QA/QC standards. + Excellent documentation, organizational, and communication skills. + Proficient with basic computer applications (Word, Excel, QC software). + Must be able to pass security clearance and background check as required by federal contracts. **Physical, Environmental and Sensory Requirements** + Work may be performed at active construction sites in varying weather conditions. + Frequent travel may be required to support multiple task orders across a geographic region. + Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. + Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. **Disclaimer** **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

OUR COMPANY As a manufacturing firm, ACDi's biggest differentiator is our people. We're here to do more than simply build "widgets". Our people offer solutions to challenging design and product development issues and are passionate about hitting customer delivery schedules and exceeding expectations. We approach each project understanding that achieving the highest quality possible is required for every step of the electronics design, engineering, and manufacturing process. What we do day-in and day-out has a lasting, meaningful impact across many industries and in the lives of everyday people. At ACDi we create a seismic measuring system that prevents people from getting stuck in elevators during an earthquake; we defend our nation by helping to build gun turrets for tanks, communication systems for troops, and military avionics; we support NASA programs with communications systems that converse with launched vehicles. We approach each project understanding that achieving the highest quality possible is required for every step of the electronics manufacturing process, because these projects help keep our country and people around the world safe, secure, and free. At ACDi, we're more than just a contract manufacturer. POSITION SUMMARY The Quality Control Inspector - Receiving will perform inspection of electronic components and fabricated items such as sheet metal, injection molded plastic, printed circuit boards, etc., and hardware, as needed, to ensure compliance with quality standards and specifications. ESSENTIAL DUTIES & RESPONSBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Other duties may be assigned. ESSENTIAL DUTIES & RESPONSBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Other duties may be assigned. Perform inspections on products by confirming product meets applicable IPC-A-600 workmanship standards, internal requirements, and customer documents, such as assembly drawings and bill-of-materials (BOM). Conduct visual and measurement tests Document and communicate rejections of unacceptable items as required in a timely manner Maintain accurate records of inspections Generate interdepartmental forms/reports such as scrap reports, non-conformance reports and any other required quality records. Interact with the purchasing department regarding non-conforming product dispositions Assist with receiving and stockroom functions to include the receipt, stocking and pulling of material Other duties as assigned Qualifications SPECIFIC EDUCATIONAL/EXPERIENCE REQUIREMENTS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. High school diploma or general education (GED) is required 1-3 years of related inspection experience in a manufacturing environment is preferred REQUIRED/PREFERRED SKILLS Knowledge of ISO9001 or AS9100 quality management system is preferred Knowledge of IPC workmanship standards Strong verbal and written communication skills Ability to read and/or interpret rough schematics, complex drawings, wiring diagrams, verbal instructions, BOMs, and gerber files Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements are met Prior experience working with an ERP system is required, experience using Epicor is a plus Strong attention to detail is required PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; sit; and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. ENVIRONMENT CONDITIONS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee may be exposed to hazards (chemical, mechanical, and/or radiant energy). The employee may be required to wear protective clothing such as heel straps and a lab coat. The noise level in the work environment is usually moderate. All work will be performed indoors. ACDi is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by the law.

Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Paid time off Glenshaw, PA $18+ for entry level, $2/hr shift differential for 2nd shift work Shift Time: 12:30PM - 8:30PM Reports to: Quality Manager FLSA Status: Non-exempt, full-time hourly Health, Dental, Vision, PTO, 401k benefits! Job Summary: The Quality Inspector ensures that products and materials meet company and customer standards throughout the manufacturing process. This role involves inspecting products, conducting measurements, and collaborating with production teams to maintain quality control. Qualifications & Competencies: • High school diploma or general education degree (GED) required. • Strong understanding of basic math, measurement, and statistical concepts. • Ability to read and interpret quality standards and documentation. • Experience following quality procedures and legal/customer requirements. • Proficiency in Microsoft Office; ability to learn IQS software. • Strong attention to detail with the ability to follow verbal and written instructions. • Excellent communication and interpersonal skills. Essential Duties, Responsibilities (Other duties may be assigned): • Inspect in-process production using visual and measurement tests, ensuring specifications are met. • Perform first-piece sign-offs, spot audits, and final inspections. • Review customer quality requirements, including drawings, inspections, and reports. • Maintain and file retained production samples. • Conduct layered process audits, manufacturing process audits, and quality management system (QMS) audits. • Assist with Production Part Approval Process (PPAP) for automotive customers. • Support additional quality-related tasks as assigned. The physical requirements of this role include: • Ability to reach with hands and arms. • Occasionally stand, walk, climb, kneel, and crouch. • Lift/move up to 25 lbs regularly and up to 50 lbs occasionally (with assistance). • Must have close, distance, color, and peripheral vision, along with depth perception. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Compensation: $18.00 - $20.00 per hour About Us AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States. We have been providing IT solutions to customers from different industry sectors, helping them control costs and release internal resources to focus on strategic issues. AHU Technologies INC. was co-founded by visionary young techno-commercial entrepreneurs who remain as our principal consultants. Maintaining working relationships with a cadre of other highly skilled independent consultants, we have a growing number of resources available for development projects. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.

Geotechnical Engineering Firm in Owings Mills Maryland seeking construction inspectors with materials testing experience for Public Works, Aviation, and Commercial assignments. Current NICET, WACEL, MARCTP, CWI, NACE, and/or ACI certifications would be necessary for soils, concrete, masonry, asphalt, rebar and other materials credentials. Special Inspections would require a combination of certifications that would allow candidate more senior opportunities. Projects throughout Maryland, DC and Virginia. Will provide additional training to motivated candidates. Opportunities for advancement based on attitude. Good writing and communication skills, dependable automobile and clean driving record a must. Pay commensurate with experience and certifications. EOE Salary Description Based on level of experience

Job Title: Electrical Quality Control InspectorJob Description The Electrical Quality Control Inspector is responsible for planning, coordinating, and executing the commissioning process for data center facilities. The role ensures all systems operate as intended and meet design specifications. This position involves managing commissioning activities across electrical, mechanical, and control systems, ensuring compliance with industry standards, safety regulations, and client requirements. Responsibilities + Develop and manage commissioning plans, schedules, and procedures for data center projects. + Oversee functional testing of critical systems, including HVAC, electrical distribution, UPS, generators, fire suppression, and monitoring systems. + Ensure integration and interoperability of all systems prior to handover. + Collaborate with design engineers, construction teams, vendors, and clients to align commissioning activities with project timelines. + Conduct regular progress meetings and provide status updates to stakeholders. + Verify installation and performance against design specifications and operational requirements. + Ensure compliance with applicable codes, standards (ASHRAE, IEEE), and client-specific guidelines. + Prepare detailed commissioning reports, test results, and issue logs. + Maintain accurate records for turnover and future maintenance reference. + Identify potential risks during commissioning and implement mitigation strategies. + Ensure adherence to safety protocols and environmental regulations. Essential Skills + Data Center Experience + Commissioning Experience + Experience with Switchgears, UPS/ATS, Generators, and Chillers + Strong understanding of electrical and mechanical systems + Excellent project management and organizational skills + Ability to interpret technical drawings and specifications + Proficiency in commissioning software and tools Additional Skills & Qualifications + Bachelor's degree in Mechanical, Electrical, or Industrial Engineering (or related field) + 5+ years in commissioning, preferably in mission-critical facilities or data centers + Certified Commissioning Professional (CCP) + LEED Accredited Professional or equivalent project management certification Work Environment The position is based on a Data Center site in Manassas, VA. The role is a 6-month contract-to-hire opportunity, offering comprehensive benefits including Medical, Dental, Vision, and 401(k) options. Job Type & Location This is a Contract to Hire position based out of Ashburn, VA. Pay and Benefits The pay range for this position is $150000.00 - $175000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Ashburn,VA. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Thales Defense & Security, Inc. (TDSI) Headquartered in Clarksburg, MD, is a U.S. company that has been serving domestic and international defense Air, Land and Sea domains for 60 years. With over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI's key technologies include tactical handheld radios, expeditionary satellite terminals, helmet-mounted displays, optics and target recognition capability, advanced radars, undersea sensing and missile systems. Lives depend on what we do! Top Benefits (Subject to terms of applicable policies/plans) * Competitive Salary * Yearly Incentive Compensation Program * Medical insurance for self and eligible family members * Generous 401(k) program - up to 7% company contribution and 100% immediate vesting * Tuition Reimbursement * Paid wellness, vacation, and holiday leave * Paid maternity, paternity, and parental leave * 9/80 Work Schedule (every other Friday off) We currently have an opening for a Senior Quality Control Inspector - 1st or 2nd Shift in our Clarksburg, MD Campus. The Senior Quality Control Inspector will report to the Manager of Procurement Quality Assurance. First shift hours are 7:00 am to 4:30 pm. Second shift hours are 2:30 pm to 12:00 am. Second shift candidates must be able to train on first shift for 30 days. Responsibilities * Inspect electrical assemblies in accordance with IPC-A-610 and J-STD-001 standards. * Inspect mechanical assemblies in accordance with technical documentation. * Able to work unsupervised in performing inspections. * Read and interpret mechanical drawings. * Interface with the Enterprise Resource Planning system. * Communicate non-conforming material status. * Interface with Quality Engineering in support of problem resolution and continuous improvement. * Maintain high ethical standards, including compliance with all company procedures. Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * U.S. Citizenship required. - Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. * Excellent verbal and written communications - Fluent in English. * High school diploma required. * 4-8 plus years' experience in quality, manufacturing or related technical environment. * Experience in inspecting electrical / mechanical assemblies. * Knowledge of IPC standards. * IPC-A-610 and J-STD-001 certifications required. * Ability to read and understand technical data documentation. * Experience with ERP systems; SAP S/4 Hana a plus. * Computer literate. * Ability to comply with all Company guidelines, policies, procedures and embrace Company Core Values. The hourly pay range for this role is $23.40 - $29.90 USD along with a target incentive compensation plan (ICP) of 3%. The pay range provided is a good faith estimate representative of the experience level for the role described above. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. For specific questions about this job posting, candidates may contact talent acquisition at *********************. Thales Defense & Security, Inc. is committed to non-discrimination as applicable under federal, state and local laws. We are an E-Verify Employer. If you need an accommodation or assistance in order to apply for a position with Thales Defense & Security, Inc., please call Human Resources at ************. #LI-JK1 #LI-Onsite

Please Note: Upon completion of your application and confirmation that you meet the listed qualifications, you will receive a required assessment (TestGorilla) via email within 2 business days. This assessment is a critical part of our selection process. Be sure to check your spam or junk folder if you do not see the email in your inbox. Who YOU are and what YOU can become: The Quality Inspector is an entry-level position responsible for performing basic inspections of aerospace components, assemblies, and materials under supervision. This role focuses on learning aerospace quality standards, inspection techniques, and documentation requirements while supporting compliance with AS9100, FAA, and customer specifications. Who WE are and where WE are going: At MRA Systems, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. At ST Engineering MRAS, we are also rapidly augmenting our maintenance, repair and overhaul (MRO) capabilities leveraging the company's expanded aircraft nacelle portfolio as well as it's materials and processing expertise. What YOU will do: * Perform independent visual, mechanic, dimensional, and functional inspections of parts, assemblies, and finished products. Perform in-process, final, and receiving inspections on directed parts, assemblies, and subassemblies. * Verify dimensions, tolerances, materials, finishes, and configurations per engineering drawings, blueprints, and specifications. * Properly tag, label, and segregate nonconforming material. * Ensure proper identification, traceability, and documentation of parts and materials. * Interpret engineering drawings, specifications, and GD&T to determine inspection requirements. * Use a wide range of precision measuring instruments (i.e. calipers, micrometers, height gauges, bore gauges, CMMs as applicable). * Complete and review inspection documentation, nonconformance reports, and inspection records. * Identify, document, and communicate quality issues and trends to other relative quality and production teams (including, but not limited to Leads, P1s, Quality Engineers, management, etc.). * Review, validate, verify and perform First Article Inspections (FAI) in accordance with AS9102. * Ensure compliance with AS9100, FAA, customer, and internal quality requirements. * Maintain inspection records in accordance with regulatory and company retention requirements. * Support internal, customer, and regulatory audits. * Assist with root cause analysis, corrective actions, and continuous improvement initiatives. * Provide guidance/assistance to Inspector B personnel as needed. * Accurately document and report inspection results, nonconformances, and corrective actions in quality systems. * Maintain a clean, organized, and safe work area. * Participate and successfully complete training related to aerospace quality standards and inspection methods. SPECIFIED FUNCTIONAL DUTIES MACHINED PARTS AND WELDMENTS Inspects highly complex parts working to established procedures wherein it is necessary to check a number of related dimensions and a variety of reverse curves and compound angles. Establishes reference points and uses same to accurately check many inter-related and coordinated dimensions in different planes, irregular machined surfaces, precision tolerance dimensions, etc. Inspects for dimensional accuracy, machined and/or welded assemblies, castings, forging, extruded sections, bar stock and similar items of average complexity that, in general, involve few related dimensions, angles, radii and alignment which may occasionally involve some mathematical computations. Checks threads with wires and calculated dimensions, when not given, to ascertain maintenance of prescribed specifications. Lays out items of the above complexity, marking all location points and reference lines in accordance with drawings. Inspects machined parts and weldments, utilizing precision measuring instruments. Performs a limited amount of mathematical computations to verify interrelated and coordinated working points located in one or two planes. Makes setups on surface tables to determine dimensional acceptability. Projects flat and contoured shapes from lofts to find exact locations and true sizes, shapes and dimensions. Inspects parts of average complexity wherein it is necessary to check various related dimensions, contours, curve and angles. If necessary, makes first part inspection to establish inspection procedure for average complexity items; facilitates the inspection process by eliminating or standardizing check points and improvising other inspection aids. May also perform inspection of parts mentioned above when dimensional and/or structural variations of parts received do not readily permit establishment of a standard inspection procedure. Checks such aspects as component and overall dimensioning, hole patterns, trim lines, fits, and parallelisms of these parts in order to verify workmanship and conformance to drawings and specifications. Inspects a wide variety of incoming customer furnished and bailed equipment, parts and materials as required for visual acceptance of items involved for proper functioning; checks for damage incurred in shipping and/or handling. Furnishes company and customer representatives with necessary information to assist in resolution of discrepancies. TOOL & CALIBRATION The complexity of items inspected is characterized by the presence of dimensions, angles and radii that may be checked by the use of right angles and or parallel set ups, and simple plane trigonometric calculations; regular contours or spring back allowances are charted, and the computation of dimensions not shown on design blue prints can be solved by the use of front angles.Lays out items of the above complexity, marking all location prints and reference lines in accordance with drawings. Inspects tool, die, jig, or fixture utilizing precision measurements and performing a limited amount of mathematical computations. To verify working points located in one or two planes, makes set ups on surface tables as required. Checks such aspects as component and overall dimensioning, hole patterns, trim lines, fits and parallelisms of these parts to verify workmanship and conformance to drawings and specifications. Performs regularly scheduled inspection and calibration of shop working standards using primary standards and predetermined data to ascertain accuracy. CHEMICAL Performs simple chemical tests to determine nature of substance. Selects samples of parts, materials and solutions for laboratory analysis. Occasionally interprets laboratory analysis to determine whether the item conforms to prescribed specifications and to physical and chemical properties. ASSEMBLY Inspects all small parts, sub-assemblies, and major assemblies for conformity to specifications, tolerances, clearances, and workmanship standards. Examines assemblies to determine whether or not metal is flush against fixture, holes drilled accurately at designated points, parts securely fastened, rivets securely driven, and assemblies held in correct alignment. Analyzes functional difficulties in assembly procedure to determine whether the defect is a result of faulty design, tooling or shop operations and recommends methods of adjustment. Participates in the preparation of a log of inspection points at beginning of contract, and makes alterations when designs are changed or experience proves that closer inspection is required. PRODUCT SYSTEMS Inspects sub-assemblies and assemblies up to and including the level of an individual assembly or items of similar complexity for conformance to specifications, clearances, fit tolerances, alignment, security and engagements, detecting such malfunctions as excessive chatter, pressure, noise and erratic operation. Analyzes and evaluates inspection difficulties, to determine whether the defect is the result of faulty design, tooling or shop operations and recommends corrective action. Reviews inspection procedures and manuals suggesting appropriate changes to facilitate inspection. Visually and physically inspects for cleanliness, damage, and completeness, incidental to and in conjunction with above work operations. Inspects for structural flaws, mechanically operates and inspects items, and checks critical dimensions to exacting tolerances. Requests removals, adjustments or replacement of malfunctioning and faulty parts and rejects or requests rework as described herein. May be required to monitor tests. BONDING Performs the inspection of the development and initial setup of standard prototype bonded honeycomb and/or metal assemblies; checks locations, fit, and clearances of parts by comparison with specifications and blueprints. Performs subsequent inspections of production assemblies of this type. Checks core and metal skin for proper bonding, contour, and surface in accordance with specifications on all types of bonded honeycomb and/or metal assemblies and sub-assemblies. Inspects test or core buttons for adhesion, porosity, density and similar physical qualities. Checks honeycomb material after trimming for dimensional accuracy, damage to core, and/or for density as necessary. Inspects standard repair work such as splices or patches in non-stress areas, rebonding of separations of edges and corners, and similar types of repairs performed on bonded assemblies and/or sub-assemblies of the complexity described above. FINISHING AND PLATING Inspects metal detail parts for anodic, Alodine, cadmium, zinc, chrome, silver, nickel, copper and other metal plating and treating processes. Checks for appearance, thickness, blisters, material defects, adherence to surface, etc. Performs inspection of parts, assemblies, and areas in aircraft or aircraft sections to which finish is to be applied; insures that surface of metal has been properly cleaned, treated and/or coated with rust preventatives prior to application of specified finish. Inspects parts, assemblies, and areas after completion of finishing process to insure proper type, color, appearance, uniformity of film, thickness, adherence to surface, etc. Inspects adhesive, coated parts to ascertain that designated areas have been coated and that parts have' been cured in accordance with specifications. What YOU must bring to Succeed: * High school diploma or GED required. * Must be 18 years or older. * Technical school or vocational training in manufacturing, machining, or aerospace preferred. * 0-2 years of manufacturing or quality-related experience. * Entry-level candidates with production, assembly, or machining experience encouraged to apply. * On-the-job training provided in AS9100, AS9102, and inspection techniques. PHYSICAL REQUIREMENTS Ability to stand and perform work duties for an extended period of time and perform hands-on inspection tasks as required/assigned. Must be able to lift a minimum of 25 pounds. Ability to work in various temperatures (e.g. warm, hot, cold, freezing) to complete warehouse tasks. Ability to work in an environment that includes dust and other debris. Must be able to successfully complete all medical surveillance requirements. Desired Characteristics: * Strong attention to detail and sound judgment in quality decisions. * Knowledge of aerospace quality standards, GD&T, and inspection methods, preferred. * Knowledge and/or ability to learn and interpret complex engineering drawings and GD&T. * Knowledge and/or ability to learn in precision measuring and inspection techniques. * Working knowledge of AS9100, AS9102, and aerospace quality requirements. * Ability to independently identify nonconformances and recommend corrective actions. * Ability to collaborate effectively with cross-functional teams. * Must be able to successfully complete all job-related eligible certifications and training requirements as assigned/directed. * Must be able to obtain and maintain certified inspector operator certification. * Basic computer and data entry skills. * Attention to detail and willingness to learn. * Ability to read and interpret basic engineering drawings and specifications. * Basic understanding of manufacturing processes. * Ability to follow detailed instructions and procedures. * Effective written and verbal communication skills. * Ability to work with supervision and as part of a team. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: Baltimore Apply now "

The Quality Control Inspector oversees the Quality Control Program for the HVAC Mechanics and enforces adherence to the ISO standards and procedures. Assigned to the development, administration, and daily functions of the quality control program, this position shall be fully trained in their areas of responsibility including - instruction and procedure development; product quality monitoring; inspection techniques; and inspection data management and analysis. Shift: Part-Time, flexible. 2-3 days per week (Monday - Friday between 6:00am-6:00pm). 20-24 hours per week Pay Rate: $44.57 per hour Essential Job Functions: Quality management plans and supporting documentation to ensure that HVAC projects are being built safely on budget, on schedule, within scope, and in conformance with applicable regulations and guidelines. Administering the Quality Assurance Program throughout the contract for HVAC specific work order tickets Assigned to the development, administration, and daily functions of the Quality Assurance Program, shall be fully trained in their areas of responsibility which may include: instruction and procedure development; product quality monitoring; inspection techniques; and inspection data management and analysis. Oversees and can authorize the procurement of project safety supplies and equipment and is responsible for the implementation of the site safety training of employees and subcontractor safety training. Submit daily field notes recording activities at each project site; prepare and coordinate material submittal sheets and shop drawing submittals; and prepare quality control reports. Establish and maintain quality standards for services rendered. Recommend any necessary adjustments and changes to PM processes. Make recommendations to HVAC Mechanics on how they can correctly or more efficiently complete work or tickets and PMs. Inspect and test the services and equipment maintained. Perform inspections at random to assess quality of services. Complete weekly and monthly QC checks on completed preventative and reactive maintenance work tickets related to HVAC systems. Ensure accurate completion of assigned work tickets for maintenance tasks. Manage quality management plans and supporting documentation to ensure that projects are completed on budget, on schedule, within scope, and in conformance with applicable regulations and guidelines. Assist with logistics and administrative duties as needed. Support PM in developing integrated logistics support. Ensure operations and maintenance contract scope is understood by site team. Attend required stakeholder meetings, training programs, and reinforce requirements within the team. Other duties as assigned. Qualifications Required Skills, Experience, and Education: High School Diploma or Equivalent Ability to obtain a Top Secret clearance 5 years minimum of related experience in Quality Control, Quality Assurance, ISO Standards, or related 5 years minimum experience working with commercial HVAC systems Experience using CMMS systems Experience in working in operations and maintenance in commercial buildings Ability to multi-task and lead a project to completion Excellent verbale and written communication skills Excellent time management skills with a proven ability to meet deadlines Proficiency with Microsoft Office applications Analytical and problem solving skills Strong project estimating skills with a demonstrated ability to complete projects on time within budget Ability to multi-task, problem solve, and lead project to completion Facilities management inspection and administration with similar large-scale projects Must have the ability to prioritize and multi-task in a fast-paced environment Preferred Education, Skills, Licenses, and Certifications: Bachelor's degree in occupational health and safety, business management, statistics or related OSHA 10/30 USACE QCM HVAC journeyman license in VA Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The individual must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. Walking, stepping, climbing or otherwise moving from one location on the job site to another. Visually seeing equipment operations well (either naturally or with corrective lenses). Exposure to computer screens, monitors and other screens as necessary. Sitting for periods of time. Standing, stooping kneeling, squatting, climbing or sitting for long periods of time. •Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Working at elevated heights. Exposure to working outdoors in all-weather conditions. Adapting to outdoor conditions and prolonged exposure to sometimes adverse weather conditions. Remaining calm during emergencies and respond appropriately as dictated by the circumstance of the incident. Ability to lift and/or carry up to 50lbs. Able to work at heights up to 30 feet. Working Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is usually moderate to occasionally loud. ACTION FACILITIES MANAGEMENT, INC. (AFM) is a Woman-Owned Small Business (WOSB) and a Minority Business Enterprise (MBE) established in 2001 that provides services to government and commercial clients in 10 states and the District of Columbia. AFM's core competencies are in the areas of Integrated Facilities Management such as Operations and Maintenance, Janitorial Services, Security, Emergency Management, and Administrative Support.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of aircraft maintenance experience. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Essential Duties and Responsibilities Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. Ensure compliance with safety standards and proactively report any unsafe conditions. Participate in pre-task planning, submittal reviews, and material/equipment verifications. Verify and document corrective actions and non-conformance resolutions. Support audits and final inspections for project closeouts. Knowledge, Experience and Skill Requirements High school diploma or equivalent; technical certification or associate degree preferred. Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. Strong working knowledge of construction methods, materials, codes, and QA/QC standards. Excellent documentation, organizational, and communication skills. Proficient with basic computer applications (Word, Excel, QC software). Must be able to pass security clearance and background check as required by federal contracts. Physical, Environmental and Sensory Requirements Work may be performed at active construction sites in varying weather conditions. Frequent travel may be required to support multiple task orders across a geographic region. Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. Disclaimer We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits.  Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of aircraft maintenance experience. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .