Quality control inspector jobs in Boise, ID - 45 jobs

Temp The Quality Control Technician will be primarily responsible for ensuring compliance with cGMP's, raw material and component receiving, releasing outbound finished goods, maintaining the Environmental Monitoring Program, and keeping quality records organized and neat.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR vvrun8Pays

is for our swing shift. GENERAL RESPONSIBILITIES: The Quality Assurance Technician is responsible for monitoring and documenting that the GMP's, HACCP, Finished product Specification, Process Sheets and/or SOP's are followed during process to achieve a good quality on the products. This position requires knowledge of standard operating procedures (SOP's), GMP's, normal operating procedures, and food safety (HACCP). SPECIFIC RESPONSIBILITIES: Preoperative inspections of Equipment and Facility Monitoring and Record keeping of Inspection ATP Swabs Operational Inspections- Facility Housekeeping Employee Practices Cleanliness of Equipment Tools and Utensils Monitoring and Record keeping of inspection Boot Foamers Inspection Response to Foreign Material Incidents Product Hold/Segregation/Release Product Sampling/Microbiological Testing Thermometers Calibration Scales calibration Internal Plant Audits Cutting room Inspection is performed to make sure that all incoming raw chicken breasts and dark meat are received in good condition and meet the raw material specifications for condition, temperature, bones, skin, veins and hard cartilage connective tissue. Ensure all refrigerated meat and poultry raw materials are handled in a safe manner and that required temperatures of product and room are maintained during the cutting and marinating process. Fry Line Ensure that all previously breaded, battered and baked meat and poultry products are cooked and/or cut at the required times and temperatures to achieve the minimum internal temperature/specification requirements. Ensure the control of the physical aspects of the product such as sizing, uniformity, defects, batter pickup, flavor and odor. One or two pounds are weighed from each sample and product is graded as required for selected customer with results recorded in Processing and Finished Product grade sheet. Packaging room: Ensure the documented control of the cooling/freezing and packaging process so that previously Fully Cooked Products are cooled/frozen at the required times and temperatures to inhibit the growth of microorganism and preserve the product prior to packaging. Ensure the elements pertaining to the monitoring and verification of metal detectors are in place so that all finished products are packaged in a safe manner to protect the consumer from potentially harmful metal objects. Execute other duties as assigned in all areas. Desired Background/Experience: Good communication skills, must read and write English, math and computer skills, detail orientated and positive attitude. High School diploma or equivalent. Benefits BandD Foods offers a competitive salary and comprehensive benefits package including, Health, Vision, and Dental insurance, 401K savings plan with employer match.. BandD Foods is an Equal Opportunity Employer and we seek to create an inclusive workplace that embraces diverse backgrounds, life experiences and perspectives.

Location: 255 N Steelhead Way, Boise, ID 83704Hire type: Full-TimeShift: 1st ShiftPay Range: $20 - $22 /hr Schedule: Monday to Friday Ability to commute/relocate: Boise, ID 83704: Reliably commute or planning to relocate before starting work (Required) JOB description Position Summary: The QA Inspector is responsible for inspecting parts, manufactured both internally and externally and providing information relative to the compliance of the parts relative to released documentation. This position will also include Final Weapons inspection as well as lasering of finished parts. PWS has a vast portfolio of weapons systems in production as well as in development. Candidates need to have understanding of basic weapons function and be willingness to learn internal process that we use. Essential Duties and Responsibilities: Inspect parts daily using appropriate measurement devices Maintain Quality Assurance paperwork Work with shop/vendor to resolve parts issues Maintain clean workspace with some shared tools Competencies: To perform the job successfully, an individual should demonstrate the following: Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Verbal communication skills are paramount. Must be able to deal with different personalities while effectively communicating the discrepancy to the team. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Must be detail oriented. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Flexibility - The ability to quickly adapt to new challenges that arise in a manufacturing environment. Ability to work with people on a team Lean Manufacturing - Exercises a commitment to driving value and eliminating waste. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Education/Experience: Degree from academic or trade school preferred but not required. Should have experience with GD&T, MCOSMOS, MeasurLink 8 and above. Experience using and setting ring gages, using thread wires, and knowledge of thread classes. Experience using different types of dial gages, basic hand tool measurement equipment including measuring coating thickness. Experience using Mahr and Mitutoyo equipment. Knowledge of basic calibration schedule and requirements. Prior machine shop experience. Language Ability: Read, analyze and interpret typical manufacturing documents. Ability to read and interpret technical drawings as well as identify non-conformances on physical parts. Effectively present information and respond to questions from managers. Mathematical Ability: Must be able to conduct many types of mathematical problems including the ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Critical Thinking/Problem Solving a must. Integrity is a high priority in this department of PWS. Computer Skills: To perform this job successfully, individuals must have basic computer related skills including familiarization with word processing, spreadsheet, and MRP/ERP software. Certificates and Licenses: Lean/Six Sigma and QA certification desirable but not required. Past machining experience a plus. Supervisory Responsibilities: none required Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications other: Cannot have Felony conviction-weapons will be handled daily throughout the facility. Job will start immediately upon hire. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance

Job Description Incorporated in 1997, GeoTek is a full-service consulting engineering firm specializing in geotechnical engineering, construction materials testing, special inspections, and environmental consulting. We are founded on the principle of providing strong business partnerships with our clients by demonstrating a committed passion for those who demand technical advice and responsive customer service that adds value to their projects. Our mission is to build and maintain strong business partnerships by demonstrating a committed passion for the principles of high-quality customer service and professional consultation that results in optimum value to our clients. We provide our employees with just compensation and a challenging, stable work environment that embodies ongoing opportunities for them to further their individual goals. We also aim to furnish a good return for our shareholders by consistently achieving our financial objectives. GeoTek offers a variety of jobs to build on your professional career, with multiple offices located in Nevada, California, Idaho, Arizona, and New Mexico. Our branch offices serve more than just the state they are located in, providing services across a wide region. GeoTek is looking for CWI Welding Inspectors to work in our Meridian, ID office. In addition to a completive rate, we also offer vehicle reimbursement and a full suite of benefits SUMMARY:Performs a variety of testing, project-specific observations, and site assessment duties. Operates equipment, conducts tests/assessments, and reports data. Works from drawings, specifications, diagrams, schematics, and specific verbal and written instructions. Uses specific methods to observe site activities, take samples, and perform tests. Makes minor adjustments and modifications as needed.ESSENTIAL JOB FUNCTIONS AND DUTIES:Effectively communicate with the Supervisor and Dispatch to obtain daily work assignments. Prepares daily and data reports of testing and inspections. Competent in the performance of all tests and inspections assigned. Prepares and submits company documents related to the projects. Daily prepares and submits own timesheet for approval. Obtains proper field authorizations are signed by the client when required or when work beyond the original scope is requested. Advises Supervisor or Project Manager of any changes in work scope or of any potential budget overruns. Maintains positive business relationships with clients, contractors, subcontractors, material suppliers, etc.Requirements: ICC Structural Steel and Welding is required, and additional certs are a plus especially *AWS / CWI Certification*ICC Structural Steel and Welding*ICC Structural Steel and Bolting*ICC Structural Masonry*ICC Reinforced Concrete*ACI Field *UT Certs *Valid Driver's License.*Ability to accomplish tasks under adverse weather and/or site conditions.*May be required to work in confined spaces and climb and work at above-average heights.*Good or corrected vision and manual dexterity.Pay Range $30-$35 USD GeoTek is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law.

Job Description Job Summary Perform in-progress and final inspections on articles under assembly, repair, and/or alteration. Ensure all maintenance performed is in accordance with FAA regulations, the RSM (Repair Station Manual), and the OEM (original Equipment Manufacturer) maintenance manuals for approval of any article for Return to Service (RTS). This will be accomplished by physical inspection and paperwork review. SCHEDULEMonday-Friday 7am-4pm (minimum 40 hours per week) SIGN-ON BONUS Up to $25,000 sign-on bonus / relocation incentive available depending on experience. Duties & Responsibilities Perform visual inspections for quality and workmanship Monitor service department adherence to the Western Safety Manual Service is performed IAW the Repair Station Manual and FAA regulations Ensure that Western Aircraft Policy and Procedures are followed Make decisions to determine airworthiness Determine part approvals Determine major/minor repair or alterations Ensure Certificated 135 Operator's AAIP or CAMP programs are adhered to during maintenance Ensure proper tooling is used to determine airworthiness and is currently calibrated when applicable Communicate with the leads and the assigned Service Managers regarding assigned work orders Ensure all maintenance performed is of such quality that the condition of the aircraft, airframe, engine, propeller or appliance worked or will be at least equal to its original or properly altered condition RTS Authority Technician duties may be required at times Qualifications & Job Requirements Minimum five (5) years' experience in general aviation maintenance required Airframe & Powerplant Certifications required Previous QA/QC Aircraft Inspector experience preferred Experience with Gulfstream, Dassault Falcon, King Air, Cessna, Piper and Pilatus preferred Strong knowledge of FARs Strong proficiency with MS Word and Excel Other Prerequisites Pass pre-employment drug screen and background check Ability to obtain Airport Issued security badge Work Environment & Physical Requirements Work is primarily performed in an aircraft hangar environment with moderate noise level, inside environmental conditions, which provide protection from weather conditions but not necessarily from temperature changes. Working around equipment with moving parts, ability to lift and carry 50 pounds, frequent standing sitting, walking balancing and stooping. Available Benefits Medical, dental, vision Short term & Long term Disability - paid 100% by Company Life & Accidental Death and Dismemberment - paid 100% by Company Paid vacation, holidays, sick leave, jury duty, bereavement Health Savings Account or Health Reimbursement Account (employer contributions tied to participation in wellness program) 401K & Roth 401k with employer match Flexible Spending programs Western Aircraft Inc. has a Drug Free Workplace Policy which includes applicants passing pre-employment testing in accordance with 14 CFR 120. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. DOT applicants who become employees of Western Aircraft Inc. will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionOverview Monitors plant operations of compliance with regulatory and company requirements. Monitors pre-operational and operational sanitation and sanitary product handling and HACCP. Acts as liaison to USDA regulators. Responsibilities • Conducting pre-operational inspection of equipment and facilities as required, depending on the assigned shift. • Performing environmental sampling of equipment, drains, and raw and finished products. • Calibration of thermometers and scales on a daily basis. • Monitor sanitation standard operating procedures and document SSOP's in accordance with the company's program. • Monitoring and documenting the quality of packaging, raw materials, and finished products. • Monitoring foreign material detection and rejection. • Monitoring and recording weights of finished products. • Taking raw and finished product temperatures. • Monitor physical, chemical, and sensory characteristics of raw and finished products. • Generating and completing the required records and documentation on a daily basis for each product line in accordance to the customer's specifications. • Perform HACCP monitoring and verification for all critical control points of the company's HACCP programs. • Working alongside USDA and production employees. • Monitor and ensure food security and safety. Qualifications • H.S. diploma with additional specialized training where a thorough knowledge of food safety principles and HACCP was gained • Three (3) to five (5) years' experience in quality assurance in a food processing environment. • Must possess basic math and computer skills, and be able to read and analyze process charts, graphs, and logs. • Must possess good analytical and logical problem-solving skills. • Must be HACCP certified or be able to become HACCP certified. • Must have excellent oral and written skills at a technical and general level. • Knowledgeable with USDA inspected facility. Job Posted by ApplicantPro

Full-time Description ALLWEST is a 100% employee-owned geotechnical engineering, environmental consulting, construction materials testing, and special inspections firm serving the Inland Northwest and beyond. We have offices located in Hayden, Lewiston and Meridian, Idaho; Missoula, Montana; and Spokane and Tri-Cities, Washington. We are seeking an experienced Certified Construction Materials Testing Technician to join our growing Meridian, Idaho team. If you have a desire to work with a dynamic team, grow your career and have a high level of personal accountability, we want to talk with you! General Responsibilities The Certified Construction Materials Testing Technician is responsible for monitoring materials, installation, fabrication, erection, and placement of construction components to evaluate compliance with plans and specifications. Also will provide accurate preparation of electronic daily field reports that summarize services provided and calculation of test results. ALLWEST Benefits We are proud to be a 100% employee-owned company, which means that strong company performance is rewarded to all members of our team. Eligible full-time employees have access to the following benefits: Company paid medical, dental and vision Short and long-term disability, life, accident, FSA, and HSA options Paid time off and paid holidays 401(k) plan with up to 4% company match ALLWEST Employee Stock Ownership Plan (ESOP) Requirements ACI Certified Field Testing Technician Grade I or higher Nuclear Gauge Safety Training Other Preferred Certifications: WAQTC Certifications: Aggregate Asphalt I Embankment & Base In-Place Density ICC Certifications: ICC Reinforced Concrete ICC Pre-Stressed Concrete ICC Structural Steel and Bolting ICC Structural Welding ICC Spray-applied and Intumescent Fireproofing Additional Requirements: Positive attitude with a customer service approach. Effective verbal and written communications skills. Strong attention to detail. Excellent time management skills. Valid driver's license and an acceptable driving record. Ability to drive throughout our northern Idaho service region. Comfortable using computers and mobile devices such as a tablet to record field data. Ability to lift and carry up to 50 lbs. and maneuver up to 75 lbs. with assistance. We are an Equal Opportunity Employer. Salary Description $25-$35/hour

The Manufacturing Quality Technician is accountable for protecting our customers by ensuring only compliant materials enter and exit the plant. This role combines comprehensive inspection and testing of incoming raw materials, in-process components, and finished composite decking products with data-driven analysis to prevent defects and drive continuous improvement. Responsibilities include auditing quality processes, maintaining documentation and calibrations, and communicating issues to support timely resolution. By identifying process improvement opportunities and collaborating cross-functionally, the technician helps ensure product reliability, operational efficiency, and customer satisfaction. 12.5 hour shifts available; A shift; Sunday, Monday, Tuesday, every other Saturday 6:30am to 7:00pm C shift Wednesday, Thursday, Friday, every other Saturday 6:30am to 7:00pm Starting Wage DOE and Qualification is $24.00 per hour Key Responsibilities: Technical Knowledge The individual in this role must have a thorough understanding of quality control including: Measurement and test equipment use and calibrations including hand tools, gauges, optical tools, balances, color meters, and force measuring instruments. Accurate data entry and analysis methods. Quality management system compliance. Process improvement and problem-solving approaches. Area management and housekeeping best practices. Risk assessment reasoning. Nonconforming materials and rework handling. Sampling plans and proper sample preparation. Inspection techniques and processes. Auditing. Core Skills The individual in this role must demonstrate mastery in the following areas: Writing Skills: Write clear, simple sentences, complete technical forms, and apply basic math concepts like estimation and spatial reasoning. Reading Skills: Interpret manuals, safety instructions, reports, and understand images, graphs, and coding systems in the work area. Oral Skills: Communicate effectively, respond to questions, and collaborate with supervisors and team members to support plant improvements. Motivation: Take responsibility for assignments, improve skills, and set personal goals with actionable strategies. Integrity: Be honest with company property and time, communicate respectfully, and resolve conflicts constructively. Reliability: Maintain punctuality, stay composed in stressful situations, and work effectively in a structured environment. Arrive fit for duty each shift. Qualifications Minimum Qualifications: Required Ability to work 12-hour shifts in a continuous manufacturing environment. Willingness to work overtime, holidays, and weekends as scheduled. Proficiency with using a computer. Proficiency using Microsoft Office Suite products. Proficiency differentiating shades of color. Ability to operate a forklift. Strong cross-functional communication skills. At least 18 years of age. Preferred High School Diploma or GED. Strong English, reading, and writing skills for career advancement, including the ability to interpret safety rules, operating instructions, maintenance manuals, and procedural documents. Previous forklift operation experience. Previous manufacturing experience. Physical Requirements The physical requirements outlined below represent those necessary for an employee to successfully perform the essential functions of this role. Reasonable accommodations may be provided for individuals with disabilities. Lift, push, and pull, up to 50 pounds. Stand and walk around for a 12.5+ hour shift. Perform physical tasks such as bending, squatting, and kneeling. Ability to operate various different styles of forklifts Wear and operate required safety equipment, including earplugs and safety shoes and glasses. Must have proficient color shade sight for materials inspection. Read printed reports and data displayed on computer screens. Fine motor skills to operate tools, including chop saws, staple guns, calipers and other test equipment. The use of personal protective equipment (PPE), such as safety eyewear, steel-toed boots, and hearing protection, is mandatory in designated areas. While performing the duties of this Job, the employee is often exposed to hot and wet and/or humid conditions; occasionally moving mechanical parts and vibration. The noise level in the work environment is usually moderate. Additional Information Company Description: Fortune Brands Innovations, Inc. is an industry-leading innovation company focused on creating smarter, safer and more beautiful homes and improving lives. Our driving purpose is that we elevate every life by transforming spaces into havens. We believe our work and our brands can have incredibly positive impacts for not just our business and shareholders, but for people and the planet, too. When you join Fortune Brands, you become part of a high-performing team who are empowered to think big, learn fast and make bold decisions. We support an inclusive and diverse culture where everyone is encouraged and empowered to be their authentic selves, and where our differences and unique perspectives are a key strength. Explore life at Fortune Brands here Additional Information: Fortune Brands believes in fair and equitable pay. A reasonable estimate of the starting base salary range for this role is Pay Range: $20.00 USD - $26.00 USD DOE. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. At Fortune Brands, we support the overall health and wellness of our associates by offering comprehensive, competitive benefits that prioritize all aspects of wellbeing and provide flexibility for our teammates' unique needs. This includes robust health plans, a market-leading 401(k) program with a company contribution, product discounts, flexible time off benefits, inclusive fertility / adoption benefits, and more. We offer numerous Employee Resource Groups to support inclusivity and our associates' feeling of belonging at work. Fortune Brands is a brand, innovation and channel leader focused on exciting, supercharged categories in the home products, security and commercial building markets. Our portfolio of brands includes Moen, House of Rohl, Aqualisa, SpringWell, Therma-Tru, Larson, Fiberon, Master Lock, SentrySafe and Yale residential. Fortune Brands is headquartered in Deerfield, Illinois and trades on the NYSE as FBIN Equal Employment Opportunity: FBIN is an equal employment opportunity employer and does not discriminate against any applicant based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability, marital status, protected veteran status, sexual orientation, genetic history or information, or any other legally protected characteristic. Reasonable Accommodations: FBIN is committed to working with and providing reasonable accommodation to applicants with disabilities. If you need a reasonable accommodation for any part of the application or interview process, please contact us at [email protected] and let us know the nature of your request along with your contact information. Resumes submitted to this email address will not be responded to. To protect yourself from fraudulent job postings or recruitment scams, please note that FBIN job postings are exclusively hosted on our careers page at **********************

Job Description At CMT Technical Services (CMT), we're building more than just infrastructure-we're building communities, careers, and a culture rooted in integrity, collaboration, and technical excellence. As a trusted leader in materials testing, inspection, and engineering services, we help ensure the safety and strength of everything from highways and bridges to commercial buildings and energy projects. With a dynamic team of professionals across multiple regions, CMT empowers individuals to grow, innovate, and make a tangible impact on the world around them. Join us-and be part of something built to last. Job Title: ICC Special Inspector Compensation: $28-32/hour depending on experience and certifications Location: Meridian, ID FLSA Exemption: Non-Exempt Schedule: Full-time, hours may vary What you'll be doing: Perform structural inspections in accordance with applicable codes and project specifications for concrete, masonry, steel, welding, and fireproofing. Conduct soil density and concrete testing and report findings accurately. Interpret project drawings and specifications to verify compliance with applicable codes and engineer requirements. Clearly communicate inspection results and project requirements to Project Managers, Contractors, Engineers, and Testing Technicians. Prepare detailed, legible inspection reports and maintain project records without ambiguity. Maintain certifications and ensure compliance with industry standards and company policy. Uphold a professional attitude and appearance while interacting with clients and project stakeholders. Turn in timecards and datasheets daily, while keeping company vehicles and equipment in proper working order. What you have: High School diploma or equivalent; ability to perform written instructions, procedures, and calculations. Minimum 3 years of relevant experience in construction inspections, materials testing, or a related field. Strong technical knowledge of construction materials, testing procedures, and inspection methods. Physical ability to perform strenuous tasks including lifting (up to 100 lbs), climbing ladders/scaffolding (up to 100'), twisting, and crouching. Excellent communication skills and professional client-facing presence. Valid driver's license and reliable transportation. What will make you stand out: Recommendations from three Project Managers. High level of leadership and technical skills. Strong record of client satisfaction (less than 1% client complaints). Ability to manage multiple inspection assignments independently with accuracy and timeliness. Preferred Certification(s): ICC Certifications in one or more of the following: Reinforced Concrete Structural Masonry Structural Steel and Welding Spray-Applied Fireproofing ACI Concrete Field Testing Technician - Grade I OSHA 10- or 30-Hour Safety Training CMT Technical Services is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local laws. We are committed to maintaining a professional workplace where individuals are treated with respect and fairness. Job Posted by ApplicantPro

The Manufacturing Quality Technician is accountable for protecting our customers by ensuring only compliant materials enter and exit the plant. This role combines comprehensive inspection and testing of incoming raw materials, in-process components, and finished composite decking products with data-driven analysis to prevent defects and drive continuous improvement. Responsibilities include auditing quality processes, maintaining documentation and calibrations, and communicating issues to support timely resolution. By identifying process improvement opportunities and collaborating cross-functionally, the technician helps ensure product reliability, operational efficiency, and customer satisfaction. 12.5 hour shifts available; A shift; Sunday, Monday, Tuesday, every other Saturday 6:30am to 7:00pm C shift Wednesday, Thursday, Friday, every other Saturday 6:30am to 7:00pm Starting Wage DOE and Qualification is $24.00 per hour Key Responsibilities: Technical Knowledge The individual in this role must have a thorough understanding of quality control including: * Measurement and test equipment use and calibrations including hand tools, gauges, optical tools, balances, color meters, and force measuring instruments. * Accurate data entry and analysis methods. * Quality management system compliance. * Process improvement and problem-solving approaches. * Area management and housekeeping best practices. * Risk assessment reasoning. * Nonconforming materials and rework handling. * Sampling plans and proper sample preparation. * Inspection techniques and processes. * Auditing. Core Skills The individual in this role must demonstrate mastery in the following areas: * Writing Skills: Write clear, simple sentences, complete technical forms, and apply basic math concepts like estimation and spatial reasoning. * Reading Skills: Interpret manuals, safety instructions, reports, and understand images, graphs, and coding systems in the work area. * Oral Skills: Communicate effectively, respond to questions, and collaborate with supervisors and team members to support plant improvements. * Motivation: Take responsibility for assignments, improve skills, and set personal goals with actionable strategies. * Integrity: Be honest with company property and time, communicate respectfully, and resolve conflicts constructively. * Reliability: Maintain punctuality, stay composed in stressful situations, and work effectively in a structured environment. Arrive fit for duty each shift.

Job Description About Our Partner: Our partner is a high-capacity frozen potato processing facility specializing in the production of frozen French fry products. The operation is driven by a strong commitment to food safety, product consistency, and regulatory compliance. Located in Idaho, the plant plays a critical role in delivering high-quality frozen potato products to customers nationwide while maintaining strict USDA, FDA, and HACCP standards. What Our Partner Offers: Comprehensive Benefits: Competitive salary, medical, dental, and vision insurance, paid time off and holidays, and a 401(k) with company match. Stable Manufacturing Environment: Join a well-established frozen food operation with consistent production demand and long-term stability. Quality-Focused Culture: Work in an environment where food safety, product integrity, and continuous improvement are core priorities. Hands-On Impact: Play a key role in ensuring product quality and food safety from raw potatoes through finished frozen French fry products. How You'll Contribute to Our Partner's Success: As the Quality Control Technician, you will be responsible for monitoring, testing, and verifying product quality throughout the manufacturing process. You will support food safety systems, ensure compliance with regulatory and customer requirements, and work closely with production teams to identify and resolve quality issues. Your role will directly impact product consistency, safety, and customer satisfaction. Key Responsibilities: Conduct routine quality checks on raw materials, in-process products, and finished frozen French fries Monitor Critical Control Points (CCPs) in accordance with HACCP plans Perform sensory evaluations including color, texture, taste, odor, and appearance Verify product specifications such as cut size, moisture, oil content, and defect levels Collect, retain, and document samples for laboratory testing Calibrate and verify accuracy of quality testing equipment (thermometers, scales, metal detectors, etc.) Inspect packaging for correct labeling, coding, seals, and case integrity Monitor sanitation practices and GMP compliance in production and packaging areas Identify and report non-conforming products and assist with corrective and preventive actions Complete quality records, logs, and reports accurately and in a timely manner Communicate quality concerns to production supervisors and QA management Participate in internal audits, customer audits, and regulatory inspections Support continuous improvement initiatives related to quality and food safety Follow all food safety, workplace safety, and company policies Qualifications: High school diploma or GED required; associate degree in Food Science or related field preferred 2-5 years of quality control or food manufacturing experience (frozen foods or potato processing preferred) Working knowledge of HACCP, GMPs, food safety, and sanitation standards Ability to read and interpret product specifications and quality standards Strong attention to detail with accurate documentation skills Familiarity with Microsoft Excel, Word, and QA systems

Quality Assurance Inspector Do you possess a keen eye for detail? We have an amazing opportunity to use your quality control skills as an Quality Assureance Inspector in Nampa, ID! This position offers a steady work schedule, growth opportunities, and a teamwork environment. Job duties: Maintain data of non-conforming products Verify count of kits are correct Inspect circuit boards as they come off the production line under a mag light Familiar with IPC Class II All other duties assigned by the supervisor Advance Your career today! Pay: $15.00 Hours 5:30am - 4:00pm Shift: Monday - Thursday Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun, Safety, and Attendance Incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website. Please select the Nampa Branch or call our office at **************. Stop in and see our experienced friendly staff at 1000 W Sanetta St., Nampa, ID 83651. Advance Services is an equal opportunity employer #435

Job Description Boise Cascade Homedale has an exciting opening for a Quality Control Technician on Swing Shift. Responsibilities: The Quality Control Technician position requires a high level of self-motivation, accountability, and responsibility. This position will work swing shift (4:00 p.m. - 2:30 a.m.) following a training period. Daily tasks may include raw material evaluation, process monitoring and product testing, data collection, data entry, and report preparation. This person will participate in plant committees, safety programs, and the BIC process. This position can be seen as a good opportunity for advancement into a Supervisor position. Leads the quality function for Homedale Beams swing shift. Learns as much as possible about the entire glulam manufacturing process. Communicates findings both orally and in writing to department leaders. Perform all quality checks as required. Maintains records as required. Measures the effectiveness of the graders, and work with APA to train graders as required, improving grading accuracy. Responds to directives/suggestions from APA inspectors, as required. Communicates such suggestions to the leaders in all cases. Provides training to operations personnel on variety of topics related to his/her job responsibilities. Performs beam quality audits and storage audits. Monitors finishing for grading, matching accuracy, and proper warehousing. Performs warehouse proper load identification and cleanliness. Performs other quality checks and tasks as assigned. Basic Qualifications: High school diploma or general education degree (GED); Excellent communication skills and basic computer skills; must have competence in mathematics and basic statistics; effective communication and coordination within the department and with production supervisors is required. Preferred Qualifications: 1+ years experience in quality control in the wood products industry Bachelor's degree in Wood Science or Forestry

The QA/QC Instrumentation & Controls Subject Matter Expert (I&C SME) serves as the technical authority for all instrumentation, controls, and automation quality functions at a world-class semiconductor manufacturing construction project in Boise, Idaho. This individual ensures all systems meet design intent, code compliance, commissioning requirements, and semiconductor-industry quality standards. The I&C SME partners closely with the Owner, General Contractor, EPC teams, trades, tool vendors, and Commissioning to ensure flawless installation, documentation, and turnover. This position requires a professional with exceptional integrity, uncompromising values, and a “do the right thing” mindset, capable of maintaining a high-performance culture throughout all stages of construction and start-up. Key ResponsibilitiesQuality Assurance & Quality Control Oversee and execute QA/QC activities related to PLC systems, sensors, instruments, control panels, SCADA, DCS, BMS, and facility integration points. Perform verification and validation of I/O, instrument calibration, loop checks, field device installation, and control-system integrity. Review, approve, and audit contractor QC plans, inspection/test plans (ITPs), method statements, and installation procedures. Conduct field inspections to ensure compliance with project specifications, P&IDs, control narratives, ISA standards, cleanroom requirements, and semiconductor best practices. Identify and document non-conformances (NCRs), drive root-cause analysis, and verify corrective/preventive actions. Technical Leadership & SME Duties Serve as the subject matter expert for all I&C design, installation, testing, and commissioning issues. Interface with engineering, tool vendors, facilities teams, and commissioning teams to resolve complex instrumentation and automation issues. Provide technical oversight for hazardous gas systems, ultrapure water controls, chemical distribution systems, cleanroom environmental controls, and advanced process tooling interfaces. Support Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning readiness. Documentation & Turnover Ensure accurate and validated as-built documentation, redlines, calibration sheets, loop sheets, test records, and punch list closure. Support turnover package development aligned with semiconductor turnover requirements (CxPOR, SmartCompletions, etc.). Maintain meticulous documentation with traceability, quality evidence, and audit readiness. Safety, Ethics & High-Integrity Culture Promote a zero-compromise safety mindset across all I&C work. Uphold and model high ethical standards, honesty, transparency, and professionalism in all interactions. Champion quality-first decision-making, even under schedule pressure. Immediately escalate integrity or compliance concerns through proper channels. Collaboration & Communication Work cross-functionally with construction, commissioning, engineering, and vendor teams to ensure seamless system integration. Provide daily quality reporting, progress updates, and risk escalation to the Owner's QA/QC leadership. Facilitate constructive problem-solving, ensuring alignment with project objectives and industry-leading standards. Requirements Required 10+ years of experience in instrumentation and controls within semiconductor, high-tech manufacturing, pharmaceuticals, chemical plants, or equivalent advanced industrial facilities. Deep familiarity with ISA standards, instrument installation practices, cable routing/termination, P&IDs, I/O diagrams, loop sheets, and calibration procedures. Strong experience in cleanroom environments, process equipment interfaces, and facility support systems. Comprehensive understanding of I&C commissioning, turnover requirements, and integrated facility start-up. Proficiency with digital QA/QC platforms (e.g., SmartCompletions, CxAlloy, BIM360, Bluebeam, or similar). Demonstrated ability to interpret engineering packages and lead technical problem resolution. Proven record of high integrity, strong values, professionalism, and ethical decision-making. Excellent communication, documentation, and interpersonal skills. Preferred Experience supporting semiconductor megaprojects (e.g., Micron, Intel, TSMC, Samsung, GlobalFoundries). OSHA 10/30, NFPA 70E, ISA certifications, or related safety/technical credentials. Familiarity with Lean Construction, continuous improvement, or advanced turnover systems. Why This Role Matters This I&C SME directly impacts the reliability, safety, and operational excellence of one of the most advanced semiconductor manufacturing sites in the country. The successful candidate will embody excellence, integrity, and precision, helping deliver a facility that meets the highest global standards for technology and quality.

Location: 255 N Steelhead Way, Boise, ID 83704 Hire type: Full-Time Shift: 1st Shift Pay Range: $20 - $22 /hr Schedule: Monday to Friday Ability to commute/relocate: Boise, ID 83704: Reliably commute or planning to relocate before starting work (Required) JOB description Position Summary: The QA Inspector is responsible for inspecting parts, manufactured both internally and externally and providing information relative to the compliance of the parts relative to released documentation. This position will also include Final Weapons inspection as well as lasering of finished parts. PWS has a vast portfolio of weapons systems in production as well as in development. Candidates need to have understanding of basic weapons function and be willingness to learn internal process that we use. Essential Duties and Responsibilities: Inspect parts daily using appropriate measurement devices Maintain Quality Assurance paperwork Work with shop/vendor to resolve parts issues Maintain clean workspace with some shared tools Competencies: To perform the job successfully, an individual should demonstrate the following: Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Verbal communication skills are paramount. Must be able to deal with different personalities while effectively communicating the discrepancy to the team. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Must be detail oriented. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Flexibility - The ability to quickly adapt to new challenges that arise in a manufacturing environment. Ability to work with people on a team Lean Manufacturing - Exercises a commitment to driving value and eliminating waste. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Education/Experience: Degree from academic or trade school preferred but not required. Should have experience with GD&T, MCOSMOS, MeasurLink 8 and above. Experience using and setting ring gages, using thread wires, and knowledge of thread classes. Experience using different types of dial gages, basic hand tool measurement equipment including measuring coating thickness. Experience using Mahr and Mitutoyo equipment. Knowledge of basic calibration schedule and requirements. Prior machine shop experience. Language Ability: Read, analyze and interpret typical manufacturing documents. Ability to read and interpret technical drawings as well as identify non-conformances on physical parts. Effectively present information and respond to questions from managers. Mathematical Ability: Must be able to conduct many types of mathematical problems including the ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Critical Thinking/Problem Solving a must. Integrity is a high priority in this department of PWS. Computer Skills: To perform this job successfully, individuals must have basic computer related skills including familiarization with word processing, spreadsheet, and MRP/ERP software. Certificates and Licenses: Lean/Six Sigma and QA certification desirable but not required. Past machining experience a plus. Supervisory Responsibilities: none required Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications other: Cannot have Felony conviction-weapons will be handled daily throughout the facility. Job will start immediately upon hire. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance

Job Summary Perform in-progress and final inspections on articles under assembly, repair, and/or alteration. Ensure all maintenance performed is in accordance with FAA regulations, the RSM (Repair Station Manual), and the OEM (original Equipment Manufacturer) maintenance manuals for approval of any article for Return to Service (RTS). This will be accomplished by physical inspection and paperwork review. SCHEDULEMonday-Friday 7am-4pm (minimum 40 hours per week) SIGN-ON BONUS Up to $25,000 sign-on bonus / relocation incentive available depending on experience. Duties & Responsibilities Perform visual inspections for quality and workmanship Monitor service department adherence to the Western Safety Manual Service is performed IAW the Repair Station Manual and FAA regulations Ensure that Western Aircraft Policy and Procedures are followed Make decisions to determine airworthiness Determine part approvals Determine major/minor repair or alterations Ensure Certificated 135 Operator's AAIP or CAMP programs are adhered to during maintenance Ensure proper tooling is used to determine airworthiness and is currently calibrated when applicable Communicate with the leads and the assigned Service Managers regarding assigned work orders Ensure all maintenance performed is of such quality that the condition of the aircraft, airframe, engine, propeller or appliance worked or will be at least equal to its original or properly altered condition RTS Authority Technician duties may be required at times Qualifications & Job Requirements Minimum five (5) years' experience in general aviation maintenance required Airframe & Powerplant Certifications required Previous QA/QC Aircraft Inspector experience preferred Experience with Gulfstream, Dassault Falcon, King Air, Cessna, Piper and Pilatus preferred Strong knowledge of FARs Strong proficiency with MS Word and Excel Other Prerequisites Pass pre-employment drug screen and background check Ability to obtain Airport Issued security badge Work Environment & Physical Requirements Work is primarily performed in an aircraft hangar environment with moderate noise level, inside environmental conditions, which provide protection from weather conditions but not necessarily from temperature changes. Working around equipment with moving parts, ability to lift and carry 50 pounds, frequent standing sitting, walking balancing and stooping. Available Benefits Medical, dental, vision Short term & Long term Disability - paid 100% by Company Life & Accidental Death and Dismemberment - paid 100% by Company Paid vacation, holidays, sick leave, jury duty, bereavement Health Savings Account or Health Reimbursement Account (employer contributions tied to participation in wellness program) 401K & Roth 401k with employer match Flexible Spending programs Western Aircraft Inc. has a Drug Free Workplace Policy which includes applicants passing pre-employment testing in accordance with 14 CFR 120. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. DOT applicants who become employees of Western Aircraft Inc. will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Monitors plant operations of compliance with regulatory and company requirements. Monitors pre-operational and operational sanitation and sanitary product handling and HACCP. Acts as liaison to USDA regulators. Responsibilities • Conducting pre-operational inspection of equipment and facilities as required, depending on the assigned shift. • Performing environmental sampling of equipment, drains, and raw and finished products. • Calibration of thermometers and scales on a daily basis. • Monitor sanitation standard operating procedures and document SSOP's in accordance with the company's program. • Monitoring and documenting the quality of packaging, raw materials, and finished products. • Monitoring foreign material detection and rejection. • Monitoring and recording weights of finished products. • Taking raw and finished product temperatures. • Monitor physical, chemical, and sensory characteristics of raw and finished products. • Generating and completing the required records and documentation on a daily basis for each product line in accordance to the customer's specifications. • Perform HACCP monitoring and verification for all critical control points of the company's HACCP programs. • Working alongside USDA and production employees. • Monitor and ensure food security and safety. Qualifications • H.S. diploma with additional specialized training where a thorough knowledge of food safety principles and HACCP was gained • Three (3) to five (5) years' experience in quality assurance in a food processing environment. • Must possess basic math and computer skills, and be able to read and analyze process charts, graphs, and logs. • Must possess good analytical and logical problem-solving skills. • Must be HACCP certified or be able to become HACCP certified. • Must have excellent oral and written skills at a technical and general level. • Knowledgeable with USDA inspected facility.

Boise Cascade Homedale has an exciting opening for a Quality Control Technician on Swing Shift. Responsibilities: The Quality Control Technician position requires a high level of self-motivation, accountability, and responsibility. This position will work swing shift (4:00 p.m. - 2:30 a.m.) following a training period. Daily tasks may include raw material evaluation, process monitoring and product testing, data collection, data entry, and report preparation. This person will participate in plant committees, safety programs, and the BIC process. This position can be seen as a good opportunity for advancement into a Supervisor position. Leads the quality function for Homedale Beams swing shift. * Learns as much as possible about the entire glulam manufacturing process. * Communicates findings both orally and in writing to department leaders. * Perform all quality checks as required. * Maintains records as required. * Measures the effectiveness of the graders, and work with APA to train graders as required, improving grading accuracy. * Responds to directives/suggestions from APA inspectors, as required. Communicates such suggestions to the leaders in all cases. * Provides training to operations personnel on variety of topics related to his/her job responsibilities. * Performs beam quality audits and storage audits. * Monitors finishing for grading, matching accuracy, and proper warehousing. * Performs warehouse proper load identification and cleanliness. * Performs other quality checks and tasks as assigned. Basic Qualifications: High school diploma or general education degree (GED); Excellent communication skills and basic computer skills; must have competence in mathematics and basic statistics; effective communication and coordination within the department and with production supervisors is required. Preferred Qualifications: * 1+ years experience in quality control in the wood products industry * Bachelor's degree in Wood Science or Forestry