Quality control inspector jobs in Carson City, NV

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job Description Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also, providing the approval for return to service with respect to the work performed for work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities: Responsible to Quality Assurance for quality and airworthiness and may report to Crew Chief for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, makes adjustments and repairs, replaces components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. Requirements Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 3 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment and tools used to perform aircraft maintenance and alterations. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills/ Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Compensation and Benefits The compensation for this position typically falls between $38 - $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace (**************************************************************************** UpdateUrns=urn%3Ali%3Aactivity%3A**********048001024) **Your role at Clorox:** QA technicians are responsible for verifying the quality of our product, monitoring the effectiveness of our processes, managing non-conformances, and conducting internal audits. They are expected to drive continual improvement of product quality and regulatory compliance. Personal development through formal training and collaborative work with co-workers is essential for success of this position. This position is considered a safety-sensitive position, meaning, a lapse of attention could adversely affect the safety of others by resulting in injury, illness, or death, including without limitation a position that includes the operating, repairing, maintaining, or monitoring of heavy equipment, machinery, or operation motorized vehicle. Starting Pay: $30.31/hour + $1.35 Shift Differential Schedule: Monday - Friday 2:00 PM to 10:30 PM **In this role, you will:** **Product and Process Verification** + Verify packaging, product quality, and manufacturing processes. + Perform testing on finished product samples and Work-in-progress (WIP) samples + Review and confirm accuracy of line monitoring records. **Food Safety & GMP Compliance** + Conduct regular Food Safety and Good Manufacturing Practices (GMP) inspections. + Identify areas for improvement and recommend corrective actions. + Collaborate with front-line associates to promote Food Safety and GMP awareness. + Continuously seek and implement best practices to strengthen Food Safety and GMP culture. **Reporting and Metrics** + Submit quality metrics to leadership, including: + Product mean and Cpk values for torques, net content, labels, pH, TA, ATP. + Process completion and failure rates. **Audits** Perform GMP and internal process audits across manufacturing functions: + Ordering + Receiving + Storage + Blending + Processing + Packaging + Shipping **What we look for:** **Minimum Requirements** : + 1 years' experience in food manufacturing quality control or + 3 years' experience in manufacturing quality control or + 5 years' experience in food manufacturing + Fluent in English communications. (Verbal, Written, Reading) + Proficient in algebraic math. + Proficient with computer software and data entry. + GED / high school diploma with one of the following: + 1 year experience in a food manufacturing quality control role or + 3 years experience in a manufacturing quality control role or + 5 years experience in food manufacturing **Preferred Qualifications** : + Bachelor of Science (Microbiology, Chemistry, Food Sciences) + Ability to present results and quality initiatives to an audience of 5-15 individuals. + Proficient in statical process control. + Lean Six Sigma Green Belt certificate. + Familiarity with FDA regulations. + Experience with LDMS **Internal Eligibility Criteria:** + Completion of a minimum of one level skill blocks signed off **.** + Must be in "good standing" with the company, any written warning or above are not eligible to apply. + If you qualify, you will be interviewed following the standard interview process + **Training Period:** Must have the ability to work on the Day shift during the training period. Shift hours will vary **Our values-based culture connects to our purpose and empowers people to be their best, professionally and personally. We serve a diverse consumer base which is why we believe teams that reflect our consumers bring fresh perspectives, drive innovation, and help us stay attuned to the world around us. That's why we foster an inclusive culture where every person can feel respected, valued, and fully able to participate, and ultimately able to thrive.** **Learn more (*********************************************************************************************************** **.** **Benefits we offer to help you be well and thrive:** + Competitive compensation + Generous 401(k) program in the US and similar programs in international + Health benefits and programs that support both your physical and mental well-being + Flexible work environment, depending on your role + Meaningful opportunities to keep learning and growing + Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes. **Who we are.** We champion people to be well and thrive every single day. We're proud to be in every corner of homes, schools, and offices-making daily life simpler and easier through our beloved brands. Working with us, you'll join a team of passionate problem solvers and relentless innovators fueled by curiosity, growth, and progress. We relish taking on new, interesting challenges that allow our people to collaborate and thrive at work. And most importantly, we care about each other as multifaceted, whole humans. Join us as we reimagine what's possible and work with purpose to make a difference in the world. **This is the place where doing the right thing matters.** Doing the right thing is the compass that guides every decision we make-and we're proud to be globally recognized and awarded for our continuous corporate responsibility efforts. Clorox is a signatory of the United Nations Global Compact and the Ellen MacArthur Foundation's New Plastics Economy Global Commitment. The Clorox Company and its Foundation prioritize giving back to the communities we call home and contribute millions annually in combined cash grants, product donations, and cause-marketing. For more information, visit TheCloroxCompany.com and follow us on social media at @CloroxCo. **Our commitment to diversity, inclusion, and equal employment opportunity.** We seek out and celebrate diverse backgrounds and experiences. We're always looking for fresh perspectives, a desire to bring your best, and a nonstop drive to keep growing and learning. Learn more about our Inclusion, Diversity, Equity, and Allyship (IDEA) journey here (*********************************************** . The Clorox Company and its subsidiaries are an EEO/AA/Minorities/Women/LGBT/Protected Veteran/Disabled employer. Learn more to Know Your Rights (*********************************************************************************************** . Clorox is committed to providing reasonable accommodations for qualified applicants with disabilities and disabled veterans during the hiring and interview process. If you need assistance or accommodations due to a disability, please contact us at ***************** . Please note: this inbox is reserved for individuals with disabilities in need of assistance and is not a means of inquiry about positions/application statuses. The Clorox Company and its subsidiaries are an EEO/AA/ Minorities/Women/LGBT/Protected Veteran/Disabled employer.

As an SMT QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

Are you diligent and passionate about maintaining high standards? We're looking for a dedicated Quality Inspector to take a hands-on role in ensuring the quality and reliability of our products. In this role, you will perform well inspections, conduct audits, troubleshoot quality issues, and help define procedures that drive continuous improvement. You'll report directly to the Quality Manager and collaborate closely with other leaders across the organization. If you're someone who takes initiative to solve problems, focuses on details, and is dedicated to excellence, we want to hear from you! **In this Role, Your Responsibilities Will Be:** + Perform inspection and testing on receiving parts + Perform in-process inspection audits in the manufacturing area + Generate nonconformance reports for parts that fail inspection + Work with Assembly Operators and Manufacturing Engineers to affirm process controls + Prepare, control, and maintain manufacturing and inspection documentation + Prepare customer document packages + Support the investigation of claims and root cause analysis, including, execution of corrective actions + Assist the Quality Manager in the training of other employees + Calibrate production and inspection gauges and maintain calibration record + Perform non-destructive testing on castings and welded fabrications + Maintain a 5S work environment + May perform other duties as assigned **Who You Are:** You show tremendous amount of initiative in tough situations; is exceptional at spotting and seizing opportunities. You Actively seeks input from pertinent sources to make timely and well-informed decisions. You are able to adjust communication content and style to meet the needs of diverse partners. You always keep the end in sight and put in extra effort to meet deadlines. You have an in-depth understanding of how businesses work and make money. **For This Role, You Will Need:** + High School Diploma or equivalent experience + Three to five years of inspection experience in a manufacturing environment + Hands on experience with engineering drawings and specifications + Ability to read and interpret diagrams and Bill of Materials (BOMs) + Familiarity with 5S methodology + Solid understanding and use of calibrated measuring devices (Calipers, Micrometers and Durometers) + Working knowledge of the Quality Management System (QMS) per ISO 9001-2015 **Preferred Qualifications that Set You Apart:** + Excellent problem-solving skills and documentation/procedural skills. + Ability to work in a team environment with fellow inspectors and other employees. + Ability to use Microsoft Office Suite and Adobe **Physical Job Requirements** + Stand up to eight hours per day + Ability to work in a seated or standing position **Our Culture & Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values (************************************************************** ! **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25024321 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Now hiring! QA/QC Technician I Sparks,GA. We are looking for a QA/QC Technician to join our Agricultural Solutions team in Sparks,GA. Come create chemistry with us! BASF's Agricultural Solutions division connects innovation, customers, partners and agricultural experts and integrates sustainability criteria into all business decisions. We help farmers deliver the best possible outcomes, working to achieve the balance between economic, environmental, and social value creation for sustainable and efficient agriculture. The QC Laboratory Technician ensures the quality of products by performing physical and chemical analyses of raw materials, in-process and finished products in support of the manufacturing process. This position requires schedule flexibility to assist with vacation coverage of other team members when necessary (including some weekends and holidays) as well as some early-morning training responsibilities During your shift as a QA/QC Technician I, you will * Analyze routine raw material, in-process, and finished good samples using various laboratory techniques including High Performance Liquid Chromatography (HPLC), Gas Chromatography (GC) and other methodology such as particle size analyzer, density meter, viscometer, etc. * Provide timely and accurate documentation of all analytical data according to Standard Operation Procedures (SOP) * Escalate Out-of-Spec materials to QC Lab Supervisor for data review. * Aid in management of inventory of consumables such as HPLC columns, spare parts, reference standards, and control samples. * Complete routine troubleshooting and maintenance of laboratory equipment. * Identify and implement process improvement in laboratory functions. * Strict adherence to established quality, safety and environmental standards is required * Handle and maintaine Hazardous and Nonhazardous Waste from Lab testing and Equipment per the site guidelines. If you have... * High School Diploma with a minimum of 4 years laboratory experience or 2 years chromatography experience or Bachelors Degree (BS) (Chemistry or related science field) with minimum 2 years lab experience. * Strong math skills. * Strong computer skills including proficiency in Microsoft Word and Excel. * Strong knowledge of analytical techniques, understanding of proper chemical handling, use, storage and disposal. * Experience with Gas Chromatography (GC) * Experience with Liquid Chromatography-Mass Spectroscopy (LCMS). * Must be able to work a rotating shift that includes days, nights, weekends, and holidays. Create your own chemistry with you@BASF At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call you@BASF. We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: * Flexible work arrangements whenever possible * Highly competitive retirement savings plan with company match and investment options * Well-being programs that include comprehensive mental health support for you and your household family members * Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) * Back-up child and elder care with discount programs for families of all ages and stages * Mentoring and career development opportunities that allow you to share, learn, and thrive * Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. * Employee crisis support for when the unexpected happens * Access to our BASF wine cellar, employee discounts, and much more! About us As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF Privacy statement BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ***************************** to report fraud. Pay transparency BASF is committed to pay transparency practices. The competitive [pay range/starting wage] for this role is $xxx - $xxx. Actual pay will be determined based on education, certifications, experience, and other job-related factors permitted by law. Equal employment opportunities We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Details Minden, NVDescription Continuum Packing Solutions LLC firmly believes that our employees are the heart of our success. This position description is designed to outline primary duties and qualifications, but not limit one to specified duties, to ensure individual and group success. Job Summary: Under the supervision of the Quality Supervisor, this position is responsible for implementing techniques, processes, and procedures at the plant level to ensure continuous production of products consistent with established standards. Responsible for adhering to Standard Operating Procedures and Good Manufacturing Practices, to ensure the production of safe quality products. Essential Duties and Responsibilities: Practice, teach and enforce the Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMPs) established for Quality Practice and enforce all Safety policies and procedures Monitor and verify accuracy of product, product packaging, product labeling and product identification/markings Support team member safety by promoting safe work practices, monitoring compliance with policies, and minimizing physical hazards to promote an overall safe work environment Adhere to, teach, and monitor quality programs Ensure process controls are met; all documentation is accurate and bring about corrective action as needed Assist in external audits and documentation Using quality SOPs inspect all raw materials for accuracy, including juice tanker inspections which require safely climbing a tanker ladder Ensure all paperwork is complete and accurate Help resolve quality issues on the production floor Comply with all company policies, practices, and procedures Participate in proactive team efforts to achieve departmental and company goals Provide leadership to others through example and sharing of knowledge/skill Learn, practice, and adhere to all Safety policies & procedures, Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMPs) established for CPS Learn, practice, and adhere to all Quality policies and procedures including Safe Quality Food (SQF), Hazard Analysis and Critical Control Points (HACCP) and Hazard Analysis and Critical Quality Points (HACQP). Perform other duties as assigned Qualifications Education and Skills: Read, write, speak, and comprehend English Comprehend basic math: addition, subtraction, multiplication, division, weights and measures, and efficient use of a calculator Basic computer and data entry skills Possess mechanical aptitude with the ability to assemble, troubleshoot and perform minor repairs on manufacturing equipment. Ability to communicate both written and orally within the organization Ability to give positive suggestions to improve operations in the work center Team Oriented - being helpful, respectful, approachable, building strong working relationships and a positive work environment, is responsible, honest, loyal, interacting with others tactfully, resolving conflicts appropriately, and adapting to change Ability to manage time efficiently Ability to work well under changing demands Follow verbal and written instructions Must have good work ethics, be highly motivated, and be a hands-on problem solver Ability to detect, recognize, and judge discrepancies Requires accuracy, reliability, and attention to quality Successfully completes and attains passing score of the Blender Lead Test High school diploma or GED, and 2 years work experience in a manufacturing environment Physical Demands: Vision, hearing, and speaking to meet performance standards Climb ladder up to 10 feet off the ground using safety equipment provided Ability to stand and/or walk for long periods, reach, push, pull, lift, climb, bend, stoop, squat, and use manual dexterity to work with the following tools: blending machines, scales, pallet jacks, drum dollies, mops, brooms, portable stairs, hoses, forklifts etc. Ability to safely lift 50 pounds on a frequent basis and move heavier weights using proper equipment and/or team lifting techniques Work Environment: Requires ability to work in an environment that may contain fumes, dust, odors, moderate level noise, and temperature and ventilation variations while wearing any appropriate safety and/or protective clean room apparel required (e.g.: safety glasses, gloves, hair net, face mask or respirator, and uniforms)

Full-time Description This position performs a variety of inspection, verification, and containment duties to ensure product conformance meets specifications and requirements. The Quality Technician (QT) is responsible for evaluating parts produced on various lines, the (QT) will flag production parts found to be suspect or nonconforming, and support engineering with containment processes, the (QT) must be prepared to escalate concerns to the appropriate party and always promote a culture of quality and to minimize the number of defective parts, ESSENTIAL FUNCTIONS • Verify and document product and process conformance to the company standards and requirements • Collect and analyze samples from finish goods prior leaving the production plant • Contain and report suspect product and processes not in control • Conduct Measurement system Analysis • Document and report discrepancies and measurements results • Assist with root cause investigations for product and process issues • Support in developing and improving their own work environment to reach the target of OEE, Customer PPM, Customer Complaints, Scrap and other company and department measures • Monitor key equipment process parameters • Maintain inspection, measurement, and test equipment within the department • Perform sample layouts for Production part approvals • Perform process audits and contamination control sampling • Follow company policies, procedures and comply with standard safety rules and regulations • Comprehend current production quality standards and determine if ongoing production meets those standards • Communicate emerging and trending quality issues to prevent negative impact in production • Provide day to day production support on quality concerns and develop and implement short/long term countermeasures to quality problems. • Work from schematics, diagrams, layouts defined plans and written/verbal instructions OTHER RESPONSIBILITIES • Other duties as assigned EDUCATION, EXPERIENCE, AND SKILLS REQUIRED • High School Diploma or equivalent, Bachelor's degree in manufacturing or engineering a plus; minimum 2 years of manufacturing work environment • Use of hand inspection gages, laser profilometer and contractor inspection equipment - preferred •Yellow belt six sigma and problem-solving experience • Knowledge of CPK Statistical process control • ISO 9001 experience • Ability to determine severity of a defect and the required response • Experience with visual inspection systems and programming • Experience with basic measurement and inspection tools • Experience in high volume, tight tolerance process manufacturing environment • Strong communication skills • Excellent Computer skills: Word, Excel, Lotus Notes, etc. And data entry • Team player, dedicated to overall company performance and the ability to get along with others • Self-motivated with enthusiasm and drive; able to work independently as needed • Ability to work various shifts if needed, to support a 24/7 operation • Reliable attendance on-site required PHYSICAL REQUIREMENTS • Regularly required to walk, stand, stoop, kneel and crouch • Regularly required to reach with hands and arms, use hands to handle or feel • Ability to communicate and listen • Occasionally required to sit • Must be able to occasionally lift 35lbs. • Ability to reach to use tools and equipment for inspecting and testing • Ability to manipulate and feel small parts for inspection • Ability to inspect small parts visually and through the use of magnifying equipment • Ability to perceive depth to set up equipment

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs line clearances. Completes necessary documentation, such as production and quality Batch Production Record (BPR) information, associated current Good Manufacturing Practices (cGMP) forms, and daily activity reports. Reviews documentation (BPR, Machine Activity Logbooks (MAL), Laboratory Testing Worksheets, and other logs and inspection sheets) for accuracy and compliance with cGMPs and Standard Operating Procedures (SOP). Assists the MQ Samplers with sampling and the release of incoming materials in LIMS. Performs MQ Sampler duties as required (i.e. covers PTO, absences, business need). Completes rounds (real time line and documentation audit) throughout the shift. Performs allergen and Adenosine - 5 - Triphosphate (ATP) swabbing on equipment. Performs line inspection checks. Performs Acceptable Quality Limits (AQL) inspections. Performs preliminary investigations of the deviation and QC Hold process. Performs data entry, including LIMS entries and Oracle entries, including Oracle status changes. Performs daily internal audits to ensure compliance with GMPs and SOPs. Communicates problems/out of specification issues to supervisor/lead and operations personnel. Informed and held accountable for food safety and regulatory responsibilities. Identifies and immediately notifies management about actual or potential food safety issues. Resolves food safety issues within their scope of work. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school degree or equivalent and a minimum of 1-3 years quality related experience OR equivalent combination of experience and education. Degree in a science field helpful. Experience in quality processes, inspection, and GMP environment preferred. Basic computer skills with Word and Excel required. PERFORMANCE ABILITY Inspector I will be assigned to work in any area in which he/she has been trained based on the needs of the department on a given day. Performs routine tasks with limited decision making required. Interacts with production and audits production operations in real time. Assists with performing root cause analyses into issues and makes good decisions on corrective actions in a timely manner with some guidance when needed. Good technical writing skills to assist with holds and deviations . Demonstrated ability to consistently meet quality, safety and efficiency goals. Prioritizes and calmly handles multiple tasks simultaneously in a fast-paced environment; exhibits flexibility and willingness to change tasks frequently; and works in different areas as needed. Learns quickly, operates independently, and assumes responsibility for new tasks. Applies critical thinking skills to a variety of manufacturing issues and makes decisions to solve them. Good attention to detail skills required. Collaborates with others (including Production and the Lab); exhibits strong teamwork skills; and actively listens and communicates effectively with others. Demonstrates integrity and models NOW's core values. Consistently follows all company policies and procedures, including safety. LANGUAGE SKILLS Ability to read and interpret documents such as product specifications, departmental instructions, and procedure manuals. Ability to write routine e-mails to communicate within QC and with operations personnel. Accurately and truthfully completes documentation. Ability to use good technical writing skills to close deviations and holds as well as update quality documents. Good verbal communication and listening skills. MATHEMATICAL SKILLS Ability to apply concepts such as fractions, percentages, averages, ratios, proportions, and the metric system to practical situations. REASONING ABILITY Ability to compare results to specifications to determine if result meets requirements. Ability to interpret a variety of instructions. Good problem solving skills required. Ability to investigate situations and reasons to determine root cause. OTHER SKILLS AND ABILITIES Ability to work a flexible schedule, including off shifts and weekends. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and/or walk throughout the facility; ascend and/or descend stairs; forward bend and squat; use hands to inspect, handle, and feel; and reach with hands and arms. The employee is regularly required to enter information into a computer, handle product in various stages and forms (i.e. raw materials, work in progress, and finished products in liquid, powdered, and tablet forms), in addition to equipment and/or tools. The employee frequently is required to use his/her sense of smell. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 50 lbs. from 31 inches, carry for 5 feet and return to 31 inches. Lift up to 50 lbs. floor to waist height. Grasp up to 50 lbs. of force. Lift up to 50 lbs. and move box 10 inches to side, then back again at 36 inches. (MQ Sampler role only) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works around ingredients such as vitamins, minerals, amino acids, botanicals, etc. and chemicals such as alcohol, that may require respiratory protection. May be exposed to potentially hazardous chemicals and biological materials. Employee works near moving mechanical parts. Frequently exposed to vapors, airborne particles and/or herbal aromas, some classified as allergens or irritants. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes, (powders and liquids), equipment, and packaging. Frequently exposed to all of the FDA designated major food allergens (Milk, Eggs, Fish, Crustacean shellfish (e.g. crab, lobster, shrimp), Tree nuts (e.g., almonds, walnuts, pecans), Wheat and Soybeans, except for peanuts. As required, works in a loud area that requires hearing protection and other protective equipment to be worn. 2025 BENEFITS AT A GLANCE #hpnow

General Description: The QA/QC Inspector plans and conducts activities concerned with the quality assurance of industrial processes, materials, and products by performing the following duties. The QA/QC Inspector will represent ACCO and its subcontractors for pipe and equipment installation, welding inspection and oversight of subcontractor installation and quality. The QA/QC Inspector will participate in the General Contractors project quality program documenting installation activities. Supervises: None Essential Duties & Responsibilities Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of assigned product or component. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Reviews all purchased products or components and provides input to the decision of whether the product has been vetted by ACCO for future purchases from the vendor. Documents data obtained during all quality assurance activities, consistent with company policies, codes and procedures. Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management. Prepares reports to communicate involvement and results of quality assurance activities. Maintains a working knowledge of codes and specifications for current industry quality standards. The quality team may assign other duties. Secondary Duties / Responsibilities: Develops new approaches to solve problems identified during quality assurance activities. Prepares and presents technical information and reports to team members and management. Directs technical and administrative workers engaged in quality assurance activities. Other duties as assigned by the Site QC Supervisor or QA/QC Director in conjunction with the project team. Position Requirements (Skills, Work Experience, Education, Certifications, Licenses, etc.): To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seeking at least 5 years of experience in Quality Control with a minimum of 3 years focused on ASME B31 piping codes, industrial and commercial construction, fabrication, welding, non-destructive testing, and/or other similar fields. Current certification in accordance with AWS QC-1 as a Certified Welding Inspector (CWI) and /or ICC Mechanical - Commercial Certification preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Regular & routine attendance. ACCO Competencies: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds Specific vision abilities required by this job includes Jaeger (J1) vision annually. Regularly required to walk, climb stairs, sit, stoop, kneel, crouch, or crawl Hours: This is a non-exempt position from Monday through Friday, with one-hour break for lunch and two rest breaks. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations. #ACCO #LI-MM1

American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday.

Job DescriptionElectrical QC Inspector Halo Technical Solutions Global is seeking a detail oriented and safety focused Electrical QC Inspector to join our growing team. The ideal candidate will ensure that all electrical installations and systems meet applicable codes, standards, and project specifications while maintaining the highest level of safety awareness on site. This role requires strong technical knowledge, the ability to interpret electrical drawings, and a proactive commitment to upholding both quality and safety across the job site. Key Responsibilities Conduct detailed inspections of electrical systems and installations on active construction sites. Review blueprints, schematics, and contract documents to verify compliance with design and specification requirements. Perform quality control checks on electrical components and systems, identifying and reporting defects or non-conformance. Record and analyze inspection data for project quality reporting and documentation. Collaborate closely with contractors and site teams to resolve discrepancies found during inspections. Ensure timely and accurate documentation of all inspections, findings, and corrective actions. Provide guidance and feedback on electrical best practices to uphold safety and compliance standards. Lead by example by actively promoting job site safety culture, ensuring all activities adhere to site specific safety plans, procedures, and regulations. Requirements Proven experience in construction inspection focused on electrical systems. Strong understanding of electrical codes, standards, and regulations (NEC, NFPA, and local codes). Proficient in reading and interpreting electrical blueprints and schematics. Demonstrated commitment to jobsite safety and self-awareness in all work activities. Safety is the foundation of this role. Familiarity with site safety procedures, PPE requirements, and lockout/tagout practices. Experience with construction quality control processes and documentation practices. Ability to effectively collect and analyze field data for quality reporting. Excellent communication and collaboration skills for coordination with contractors and field teams. Detail oriented with strong problem solving and analytical skills. Valid and current Journeyman Electrician License (required). OSHA 10 certification (required). NFPA 70E Electrical Safety certification (required). Employer Identification Number (EIN) (required prior to site mobilization). Certificate of Insurance (COI) (required prior to site mobilization). Note: An EIN and COI are required before mobilizing to the jobsite; however, if you don't already have these items, don't let that stop you from applying. We can guide you through the process and provide resources to help you get set up if you meet the qualifications for this role. Why Join Us At Halo Technical Solutions Global, we're a team of former field professionals who decided it was time to do things better. We've worked the jobs, worn the boots, and lived the job site life. Now, we've built a company that puts people first and never cuts corners when it comes to quality, safety, or respect. We take pride in supporting high performance construction teams across the country. Our 1099 contract structure gives you real freedom to manage your schedule, your goals, and your success without red tape or micromanagement. You bring the expertise, and we back you up every step of the way. If you're a qualified electrical professional who wants to work smarter, be valued, and raise the bar on some of the most exciting projects in the U.S., you'll fit right in with us. Compensation & Details Job Type: Full-Time (1099 Contract) - 60 hours per week Pay: $16,000 - $17,000 per month Work Location: Sparks, NV How to Apply Click Apply to submit your application and connect with our team. Qualified candidates will be contacted directly for next steps in the onboarding process. The interview will consist of a 30 minute virtual meeting via Teams with the HTSG management team followed by a 15 minute final interview with the site's QC manager. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

**Power your future with Qualus** in our Program Management department as a Construction Quality Inspector. This position is responsible for onsite inspection of electric utility construction to ensure that projects are compliant with codes, regulations, and project specifications. This role reports to the Project Manager. **Responsibilities** + Inspects the day-to-day activities of multiple contractor crews, covering multiple disciplines, for transmission line project work. + Facilitates the installation of electric infrastructure and ensures that all safety standards, company construction standards, company specifications and governmental regulations are met. + Manages work to ensure that all performance objectives for cycle time are on target. + Prior to commencement of construction, coordinates with customer(s) at the jobsite to determine specific customer requirements, construction sequencing and provides site readiness verification. + Maintains frequent and regular contact with contractor supervision regarding job performance and documents results appropriately. + Ensures that the terms and conditions of the contract and technical specifications are met. + Makes the necessary field decisions regarding job changes and communicates them as necessary to the Supervisor and Program/Project Manager and Engineer of Record; documents all job changes to ensure compliance and ensures the updates get documented in the appropriate information technology systems. + Schedules and coordinates all required electric system outages. + Coordinates permit and work-with requirements with third party utilities and permit agencies. + Reviews and approves all documents submitted by the contractor verifying the accuracy and completeness of the documentation. + Regularly communicates job status to the appropriate parties to facilitate scheduling commitments. + Maintains customer coordination during construction phase and conducts job walk-down with customer and contractor at job completion. + Reports to service center, jobsite, or remote location. **Qualifications** + Thorough knowledge of Company work, environmental, and safety practices, including a working knowledge of electric operations, and the ability to maintain or obtain switching and outage authorization. + In-depth knowledge of materials, construction standards, regulations (OSHA), and safety requirements for electric transmission and substation construction. + Thorough knowledge of PC and job/work management applications including MS Office Suite. + Ability to interpret construction and vendor drawings, feeder prints and job jacket contents. + Ability to effectively plan, schedule, manage and coordinate daily work activities. + Strong interpersonal skills and the ability to anticipate and resolve problems promptly. + Required to have work experience and a minimum of 3-5 years of experience with construction management in the power delivery industry (specific to transmission line, distribution line, and/or substation project work). \#LI-SB1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-NV-Reno_ **ID** _2025-4578_ **Category** _Applied Solutions & Program Management_ **Position Type** _Regular Full Time_ **Remote:** _No_ **Salary Range** _$60.00/Hour - $70.00/Hour_

The Metals Inspector reports to the Stockpiling Supervisor, the Shredder Operations Supervisor, or the Terminal Operations Manager. The Metals Inspector is responsible for observing and monitoring the delivery of material to verify conformance to quality and quantity specifications, while ensuring that all of his/her efforts are compliant with the company Health, Safety, and Environmental standards. Duties may include assisting with daily production operations, as well as receiving and stockpiling of materials and products. The Metals Inspector should possess knowledge of raw materials, production processes, and other techniques required for maximizing the receipt and transfer of quality product. This position operates under flexible parameters. The primary goal of this position is to achieve excellence in all facets of the position. Providing the highest quality product safely, effectively and efficiently decreases accidents and errors and increase profits. Essential Functions Environmental and Health & Safety (H&S) * Strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards. * Provides a safe environment for all employees, customers and visitors. Operational Performance & Best Business Practices * Inspect shipments of scrap metal received via truck, rail car, or ship to ensure material meets specifications and is free from environmental hazards in accordance with scrap acceptance policy. * Correctly identify and record inspection data such as weight, grade, content, and quantity of scrap metal. * Notify operations and commercial supervisors of problems and assist in recommending remedial procedures to correct violations or issues encountered during inspection. * Collaborate with commercial department concerning quality and consistency of customer deliveries. * Direct the unloading of vehicles delivering scrap to ensure safe and orderly traffic flow within the facility. * Provide backup or assistance throughout the yard as needed or assigned. Equipment & Maintenance * Report all equipment deficiencies or malfunctions requiring maintenance or repair to the proper supervisor. Internal Control Responsibilities Supports the Company's Internal Control process which includes understanding, communicating, and complying with defined internal controls as well as suggesting and making modifications to the policies, procedures, and controls to better relate to the business. Communicates upward problems in operations, noncompliance with the code of conduct, or other policy violations or illegal actions. Interpersonal Contacts Direct contact with Stockpiling Supervisor, Shredder Operations Supervisor, or Terminal Operations Manager, operations production employees, and customers. Face-to-face and radio communication required daily. Job Conditions This position is regularly exposed to all weather conditions. Physical hazards such as noise, fumes, and dirt are present due to the equipment, machinery, and scrap as would be found throughout the scrap yard. Safety shoes, hearing protection, respirators, face shields, and additional personal protective equipment as needed, must be worn to eliminate the risks associated with these hazards. Travel is not required for this position. Handling multiple issues regarding safety and maintenance increases pressure. Work load may be unpredictable and pressure can be substantial during peak times. Critical deadlines require considerable adaptability. Disturbances of work flow and/or irregularities in work schedule are expected and occur on an intermittent basis. Extra hours may be required, sometimes on weekends, weekdays, and holidays. Physical Activities Required to Perform Essential Functions Ability to: sit rarely; stand and walk frequently on uneven ground and throughout the yard; lift and carry up to 50 pounds consistently; push and pull occasionally when moving materials; crouch or bend at the knees consistently to move or access materials or equipment; stoop or bend at the waist consistently to move materials; reach at arms length and overhead frequently; twist and turn at the neck and trunk continually; climb occasionally when obtaining items; manual dexterity required as the Metals Inspector will handle, grasp, and manipulate materials constantly; communicate by speech and hearing continually. Visual acuity needed for close detail work and documentation. Mental dexterity needed as the Metals Inspector will work independently while demonstrating attention to detail and continuous awareness. Qualifications * High School diploma, GED Certification, or equivalent experience in a similar role preferred. * Ability to develop and maintain constructive and cooperative working relationships with customers and other employees required. This position offers competitive pay along with a variety of benefits including medical, dental and vision plans for both you and your dependents; 401k with company match, paid time off which starts with your first check, and paid holidays. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older. Radius Recycling participates in e-verify for all U.S. new hires. An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check. All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees. As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

Perform construction observation and materials testing to ensure compliance with approved plans, specifications, and quality standards. Key Responsibilities: Conduct construction observation to verify work is performed according to approved plans and specifications. Perform special inspections (reinforced concrete, prestressed concrete, masonry, etc.) and field-materials testing, including soil compaction, concrete strength, and asphalt density. Record and document daily test results and observations; communicate findings with the project management team. Prepare and organize test reports for different phases of the construction project. Maintain equipment and perform routine maintenance and calibration to ensure accurate readings. Qualifications & Skills: 5+ years of experience in quality control, construction materials testing, or related field. American Concrete Institute (ACI) Grade I certification. Nevada Alliance for Quality Transportation Construction (NAQTC) Sampling and Density certification. International Code Council (ICC) Certification(s); ICC certifications in Reinforced Concrete, Prestressed Concrete, and Masonry preferred. Valid drivers license and reliable transportation. Occupational Safety and Health Administration (OSHA) 10-hour Construction certification. Proficient in overseeing construction activities, conducting field tests, and preparing detailed reports. Familiarity with equipment, techniques, and protocols used in construction materials testing. Ability to work independently, manage time effectively, and collaborate in a team environment. Physically able to lift and carry up to 50 pounds and perform duties outdoors in various weather conditions. Working Place: Reno, Nevada, United States Company : Oct 16th Virtual Fair - Wood Rogers

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual .

Are you diligent and passionate about maintaining high standards? We're looking for a dedicated Quality Inspector to take a hands-on role in ensuring the quality and reliability of our products. In this role, you will perform well inspections, conduct audits, troubleshoot quality issues, and help define procedures that drive continuous improvement. You'll report directly to the Quality Manager and collaborate closely with other leaders across the organization. If you're someone who takes initiative to solve problems, focuses on details, and is dedicated to excellence, we want to hear from you! In this Role, Your Responsibilities Will Be: Perform inspection and testing on receiving parts Perform in-process inspection audits in the manufacturing area Generate nonconformance reports for parts that fail inspection Work with Assembly Operators and Manufacturing Engineers to affirm process controls Prepare, control, and maintain manufacturing and inspection documentation Prepare customer document packages Support the investigation of claims and root cause analysis, including, execution of corrective actions Assist the Quality Manager in the training of other employees Calibrate production and inspection gauges and maintain calibration record Perform non-destructive testing on castings and welded fabrications Maintain a 5S work environment May perform other duties as assigned Who You Are: You show tremendous amount of initiative in tough situations; is exceptional at spotting and seizing opportunities. You Actively seeks input from pertinent sources to make timely and well-informed decisions. You are able to adjust communication content and style to meet the needs of diverse partners. You always keep the end in sight and put in extra effort to meet deadlines. You have an in-depth understanding of how businesses work and make money. For This Role, You Will Need: High School Diploma or equivalent experience Three to five years of inspection experience in a manufacturing environment Hands on experience with engineering drawings and specifications Ability to read and interpret diagrams and Bill of Materials (BOMs) Familiarity with 5S methodology Solid understanding and use of calibrated measuring devices (Calipers, Micrometers and Durometers) Working knowledge of the Quality Management System (QMS) per ISO 9001-2015 Preferred Qualifications that Set You Apart: Excellent problem-solving skills and documentation/procedural skills. Ability to work in a team environment with fellow inspectors and other employees. Ability to use Microsoft Office Suite and Adobe Physical Job Requirements Stand up to eight hours per day Ability to work in a seated or standing position Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values!

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs line clearances. Completes necessary documentation, such as production and quality Batch Production Record (BPR) information, associated current Good Manufacturing Practices (cGMP) forms, and daily activity reports. Reviews documentation (BPR, Machine Activity Logbooks (MAL), Laboratory Testing Worksheets, and other logs and inspection sheets) for accuracy and compliance with cGMPs and Standard Operating Procedures (SOP). Assists the MQ Samplers with sampling and the release of incoming materials in LIMS. Performs MQ Sampler duties as required (i.e. covers PTO, absences, business need). Completes rounds (real time line and documentation audit) throughout the shift. Performs allergen and Adenosine - 5 - Triphosphate (ATP) swabbing on equipment. Performs line inspection checks. Performs Acceptable Quality Limits (AQL) inspections. Performs preliminary investigations of the deviation and QC Hold process. Performs data entry, including LIMS entries and Oracle entries, including Oracle status changes. Performs daily internal audits to ensure compliance with GMPs and SOPs. Communicates problems/out of specification issues to supervisor/lead and operations personnel. Informed and held accountable for food safety and regulatory responsibilities. Identifies and immediately notifies management about actual or potential food safety issues. Resolves food safety issues within their scope of work. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school degree or equivalent and a minimum of 1-3 years quality related experience OR equivalent combination of experience and education. Degree in a science field helpful. Experience in quality processes, inspection, and GMP environment preferred. Basic computer skills with Word and Excel required. PERFORMANCE ABILITY Inspector I will be assigned to work in any area in which he/she has been trained based on the needs of the department on a given day. Performs routine tasks with limited decision making required. Interacts with production and audits production operations in real time. Assists with performing root cause analyses into issues and makes good decisions on corrective actions in a timely manner with some guidance when needed. Good technical writing skills to assist with holds and deviations . Demonstrated ability to consistently meet quality, safety and efficiency goals. Prioritizes and calmly handles multiple tasks simultaneously in a fast-paced environment; exhibits flexibility and willingness to change tasks frequently; and works in different areas as needed. Learns quickly, operates independently, and assumes responsibility for new tasks. Applies critical thinking skills to a variety of manufacturing issues and makes decisions to solve them. Good attention to detail skills required. Collaborates with others (including Production and the Lab); exhibits strong teamwork skills; and actively listens and communicates effectively with others. Demonstrates integrity and models NOW's core values. Consistently follows all company policies and procedures, including safety. LANGUAGE SKILLS Ability to read and interpret documents such as product specifications, departmental instructions, and procedure manuals. Ability to write routine e-mails to communicate within QC and with operations personnel. Accurately and truthfully completes documentation. Ability to use good technical writing skills to close deviations and holds as well as update quality documents. Good verbal communication and listening skills. MATHEMATICAL SKILLS Ability to apply concepts such as fractions, percentages, averages, ratios, proportions, and the metric system to practical situations. REASONING ABILITY Ability to compare results to specifications to determine if result meets requirements. Ability to interpret a variety of instructions. Good problem solving skills required. Ability to investigate situations and reasons to determine root cause. OTHER SKILLS AND ABILITIES Ability to work a flexible schedule, including off shifts and weekends. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and/or walk throughout the facility; ascend and/or descend stairs; forward bend and squat; use hands to inspect, handle, and feel; and reach with hands and arms. The employee is regularly required to enter information into a computer, handle product in various stages and forms (i.e. raw materials, work in progress, and finished products in liquid, powdered, and tablet forms), in addition to equipment and/or tools. The employee frequently is required to use his/her sense of smell. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 50 lbs. from 31 inches, carry for 5 feet and return to 31 inches. Lift up to 50 lbs. floor to waist height. Grasp up to 50 lbs. of force. Lift up to 50 lbs. and move box 10 inches to side, then back again at 36 inches. (MQ Sampler role only) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works around ingredients such as vitamins, minerals, amino acids, botanicals, etc. and chemicals such as alcohol, that may require respiratory protection. May be exposed to potentially hazardous chemicals and biological materials. Employee works near moving mechanical parts. Frequently exposed to vapors, airborne particles and/or herbal aromas, some classified as allergens or irritants. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes, (powders and liquids), equipment, and packaging. Frequently exposed to all of the FDA designated major food allergens (Milk, Eggs, Fish, Crustacean shellfish (e.g. crab, lobster, shrimp), Tree nuts (e.g., almonds, walnuts, pecans), Wheat and Soybeans, except for peanuts. As required, works in a loud area that requires hearing protection and other protective equipment to be worn. 2025 BENEFITS AT A GLANCE #hpnow

**Power your future with Qualus** in our Program Management department as a Construction Quality Inspector. This position is responsible for onsite inspection of electric utility construction to ensure that projects are compliant with codes, regulations, and project specifications. This role reports to the Project Manager. **Responsibilities** + Inspects the day-to-day activities of multiple contractor crews, covering multiple disciplines, for substation project work. + Facilitates the installation of electric infrastructure and ensures that all safety standards, company construction standards, company specifications and governmental regulations are met. + Manages work to ensure that all performance objectives for cycle time are on target. + Prior to commencement of construction, coordinates with customer(s) at the jobsite to determine specific customer requirements, construction sequencing and provides site readiness verification. + Maintains frequent and regular contact with contractor supervision regarding job performance and documents results appropriately. + Ensures that the terms and conditions of the contract and technical specifications are met. + Makes the necessary field decisions regarding job changes and communicates them as necessary to the Supervisor and Program/Project Manager and Engineer of Record; documents all job changes to ensure compliance and ensures the updates get documented in the appropriate information technology systems. + Schedules and coordinates all required electric system outages. + Coordinates permit and work-with requirements with third party utilities and permit agencies. + Reviews and approves all documents submitted by the contractor verifying the accuracy and completeness of the documentation. + Regularly communicates job status to the appropriate parties to facilitate scheduling commitments. + Maintains customer coordination during construction phase and conducts job walk-down with customer and contractor at job completion. + Reports to service center, jobsite, or remote location. **Qualifications** + Thorough knowledge of Company work, environmental, and safety practices, including a working knowledge of electric operations, and the ability to maintain or obtain switching and outage authorization. + In-depth knowledge of materials, construction standards, regulations (OSHA), and safety requirements for electric transmission and substation construction. + Thorough knowledge of PC and job/work management applications including MS Office Suite. + Ability to interpret construction and vendor drawings, feeder prints and job jacket contents. + Ability to effectively plan, schedule, manage and coordinate daily work activities. + Strong interpersonal skills and the ability to anticipate and resolve problems promptly. + Required to have work experience and a minimum of 3-5 years of experience with construction management in the power delivery industry (specific to transmission line, distribution line, and/or substation project work) \#LI-SB1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-NV-Reno_ **ID** _2025-4577_ **Category** _Applied Solutions & Program Management_ **Position Type** _Regular Full Time_ **Remote:** _No_ **Salary Range** _$60.00/Hour - $70.00/Hour_