Quality control inspector jobs in Catalina Foothills, AZ - 45 jobs

Job Description Job Title: Quality Assurance & Safety Technician Department: Compliance Reports To: Director of Quality Assurance Location: Tucson, AZ - Production Facility Job Type: Full-Time The Quality Assurance Technician is responsible for supporting daily food safety and quality operations on the production floor. This includes conducting inspections, collecting samples, verifying records, and enforcing Good Manufacturing Practices (GMPs). The QA Technician plays a key role in monitoring compliance with regulatory standards, internal policies, and customer specifications. This position reports to the Director of Quality Assurance and works closely with production staff to ensure the consistent quality and safety of Tucson Foods products. ________________________________________ Essential Duties and Responsibilities Quality Assurance Perform routine quality and food safety checks on raw materials, work-in-progress, and finished goods. Verify compliance with HACCP, GMPs, allergen control, sanitation, labeling, and traceability standards. Accurately document inspection results, test data, and deviations using established forms and logs. Conduct pre-operational inspections, production line audits, and environmental monitoring as needed. Collect product and environmental samples for microbiological and analytical testing. Assist with the investigation of quality issues and customer complaints; document findings and corrective actions. Support internal audits and third-party inspections by maintaining organized records and documentation. Communicate food safety concerns or non-conformances to the Director of QA or appropriate leadership promptly. Help train production staff on basic food safety and quality practices when needed. Ensure QA tools (thermometers, scales, swabs, etc.) are properly calibrated, cleaned, and maintained. Promote a strong food safety culture by modeling compliance and attention to detail on the floor. Safety Actively participate in facility safety programs and promote a culture of safety. Monitor production areas to ensure compliance with OSHA, GMPs, and company safety policies. Assist with safety inspections, incident investigations, and follow-up corrective actions. Support training efforts on proper use of PPE, chemical handling, equipment safety, and safe work practices. Identify and report unsafe conditions, near misses, and potential hazards in a timely manner. Help maintain documentation related to safety programs, including Safety Data Sheet records, safety audits, and safety meeting notes. ________________________________________ Qualifications Required: 1+ year of experience in a food manufacturing, commercial kitchen, or QA/QC role Basic understanding of food safety principles and GMPs Ability to accurately follow procedures and complete documentation Strong communication and observation skills Dependable, detail-oriented, and able to work independently Ability to read and write in English; basic math skills Preferred: Prior experience with HACCP, SQF/BRC, or food safety programs Bilingual (English/Spanish) Experience using digital QA systems or databases ________________________________________ Physical Requirements Able to lift and carry up to 40 lbs regularly Stand, walk, bend, and climb for extended periods throughout the shift Comfortable working in hot, cold, or humid environments Use of hands and fingers for repetitive tasks such as writing, swabbing, and packaging inspection ________________________________________ Work Environment The QA Technician works primarily on the production floor in a commercial food manufacturing facility. The environment may include variable temperatures and exposure to moving equipment, loud noise, and strong food aromas. PPE (personal protective equipment) is required. ________________________________________ Company Expectations Follow all food safety, hygiene, allergen control, and sanitation procedures Demonstrate accuracy, timeliness, and professionalism Report food safety issues or equipment concerns immediately Comply with all GMP and company policies Maintain a clean, organized, and respectful work area ________________________________________ Shift & Availability Shifts vary based on production schedule and may include early mornings, evenings, weekends, or holidays Full-time, on-site position ________________________________________ Compensation and Benefits Hourly wage based on experience Medical, dental, and vision insurance (for eligible employees) Paid time off and paid holidays Referral bonus program Supportive team culture-and tasty tamales every day! ________________________________________ Equal Opportunity Statement Tucson Foods is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Position is responsible for ensuring the quality of fabricated steel by reviewing design documents, inspecting materials, overseeing production, and conducting final inspections. This role collaborates with the production team to ensure all fabricated steel meets design specifications and quality standards. This role requires someone who is detail-oriented with experience in structural fabrication and quality control. Key Responsibilities: 1. Communicates with various departments such as quality, shipping, and others regarding inspections results and recommends corrective procedures. 2. Conducts final inspections of fabricated equipment for quality and compliance. 3. Ensures correct coatings are applied to fabricated steel. 4. Inspects incoming materials for specification compliance. 5. Mechanical Inspection experience to include, experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication installation. 6. Must be able to use measuring tools such as micrometers, calipers, transits, etc., and be able to set up dial indications and laser alignment devices. 7. Must be able to work in elevated areas. 8. Must have ASNT SNT-TC-1a VT level 11, CWI, or CAWI certification. 9. Must have knowledge of AISC, AWS D1.1, AWS D1.3 and AWS D1.6 Codes. 10. Must have knowledge of ASME Sec. I, ASME Sec. VIII, ASME B31.1 and ASMR B31.3. 11. Must have knowledge of bolt-up inspection including bolt lot verifications following RCSC specifications. 12. Participates in activities to support the company's strategic planning efforts. 13. Participates in the preparation of Quality control lTP. 14. Performs and records all in-process inspections/testing related to maintaining product traceability and run documentation. 15. Performs inspections to ensure product meets specifications. 16. Piping/Vessel Inspection experience level must fall in pressure vessel and pipe fabrication inspection, including welding, supports, instrumentation, etc. (ON056) 17. Structural Inspection experience to include, experience level that must fall within the fabrication of structural steel. 18. Utilizes various measuring and quality control instruments to maintain consistent product performance. 19. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements: 1. 1+ years' experience in fabrication or manufacturing environment. 2. 1+ years' experience in quality control inspection discipline. 3. Ability to work effectively in a fast-paced, team-oriented environment. 4. Excellent attention to detail and ability to identify quality issues. 5. Experience with quality management tracking software. 6. Familiarity with industry standards and regulations in structural fabrication. 7. High School Diploma required. 8. Proficient use of all Microsoft Office Suite programs. 9. Strong communication and interpersonal skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements: 1. May stoop, kneel, or bend, on an occasional basis 2. Must be able to comply with all safety standards and procedures 3. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 4. Will interact with people and technology frequently during a shift/workday 5. Will lift, push or pull objects up to 501bs on an occasional basis. 6. Will sit, stand or walk short distances for up to the entire duration of a shift/workday. 7. Will use telephone, computer system, email, and other electronic devices on a frequent basis to communicate with internal and external customers or vendors Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Subsidiary: KIRA Services / T&H Services Job Title:Quality Control Inspector Labor Category: Non-Exempt Clearance Level: No - Public Trust / Tier 1 (As Applicable) Travel Requirement: 50% At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Perform quality system audits and verifications of contractual specifications and applicable regulations in direct support of the CBP AZ Regional Facility Maintenance and Repair project site. Responsibilities: May perform any combination of the following duties: Conduct onsite inspections and audits on contract requirements, and other services performed. Schedule inspection activities. Prepare and maintain reports and support the development of quality plans. Document and track daily operations by using a computer maintenance programs(e.g., Maximo). Follow prescribed quality assurance/quality control procedures. Read and understand contract documents including plans and specifications. Adhere to company policies, procedures, and safety regulations. Perform other duties as assigned. Minimum Requirements: The technicians shall have 3 years' experience performing Quality Control inspections on building equipment and systems. Previous Journeyman-Level work experience in the commercial construction industry in the skilled trades including Electrical, Carpentry, Plumbing, HVAC. Must be able to travel to different site locations (Tucson/Yuma) to provide in-person support. Proficiency in Microsoft Office Suite (Word, Excel, Outlook); experience with work order systems such as Maximo preferred. Effective written and verbal communication skills. Must be able to satisfactorily complete a Tier 1 Public Trust background check, if required for the position. Must be able to maintain the ability to access the government worksite. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Ability to sit or stand for extended periods while working at a computer or desk. Frequent use of hands for typing, data entry, and handling paperwork. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work is performed in and around maintenance activity, which may include exposure to typical industrial or facility operations environments. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law. Reasonable Accommodation: If you have a disability or medical condition and need reasonable accommodation, please inform the designated recruiter during the hiring process.

** Founded in 1952 and formerly known as Heery International Inc., the firm operates throughout the United States as part of Turner & Townsend. It specializes in project and program management for public sector organizations, with industry-leading experts in corporate, cultural, healthcare, justice, sports, K-12 education, higher education, aviation and government facilities. Recognized for service excellence by a broad spectrum of professional organizations and industry publications, the talented multidisciplinary team at Turner & Townsend Heery exceeds client expectations - adding value, best practice and expertise at every turn. The team's unique client-centric culture is integrated into each project and reflects a passion for the built environment and staying true to the client's vision. **Job Description** The **QA/QC Senior Inspector** will lead the effort for the client and provide, on-site inspection services to ensure all construction activities comply with client standards, project specifications, and contract requirements. The Inspector will monitor quality, safety, and environmental performance while preparing detailed inspection reports and supporting project documentation. **Responsibilities:** + Perform daily field inspections of construction activities and materials. + Verify compliance with project specifications, drawings, and client standards. + Prepare and maintain daily inspection reports, logs, and punch lists. + Track contractor manpower, equipment, and material deliveries. + Ensure compliance with sustainability and IRA-related construction mandates. + Support resolution of deficiencies and coordination of corrective actions. + SOX control responsibilities may be part of this role, which are to be adhered to where applicable. **Qualifications** + High school diploma required; associate or bachelor's degree preferred. + 10-15 years of construction inspection experience, preferably on federal projects. + Knowledge of GSA inspection protocols and federal construction requirements. + Certifications such as ICC, ACI, or equivalent strongly preferred. + Experience on large projects ($100M+) highly desirable. **Additional Information** **_*On-site presence and requirements may change depending on our client's needs*_** Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at ************************** and ********************** All your information will be kept confidential according to EEO guidelines. \#LI-JS3 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter (*********************************** Instagram LinkedIn (**************************************************** _It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time._ _Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review._

Our client, a world leader in Pharmaceuticals and In -Vitro Diagnostics (IVD) tools, is seeking a "Quality Control Technician" for Tucson, AZ Contract: Long term with good potential for full time conversion PR: $28/hr on W2 with medical benefits, 401K JOB DESCRIPTION: Perform analyses finished product from other sections of manufacturing or performs investigations according to established procedures to determine conformance to acceptance specifications for a particular chemical or physical property. Prepares instruments and apparatus according to established procedures to support the testing activities of the unit. May monitor and verify quality in accordance with statistical process or other control procedures. May be responsible for supporting customer complaint evaluations and event reporting obligations, including but not limited to: product investigations, disinfection, evaluation, and preliminary failure analysis. Special projects will be performed as needed. Specialized knowledge generally of particular area, system or equipment. Requires specific training and/or certification. Applies some advanced skills to the position or specialization. May adapt procedures, processes, tools equipment and techniques to meet the more complex requirements of the position. Duties are generally routine but may include non -routine tasks. Resolves most questions and problems and refers only the most complex issues to higher levels. Applies basic skills and may develop advanced skills appropriate for the position. Duties and tasks are standardized. Resolves routine questions and problems and refers more complex and non -routine issues to higher levels. Works under direct supervision and follows standard procedures to accomplish tasks. Responsible for maintaining and continuously improving the quality system and achieving quality objectives through daily actions. KEY ROLES & RESPONSIBILITIES: · Performs analyses of finished products to determine conformance to accepted specifications. · May monitor and verify quality in accordance with statistical process or other control procedures. SKILLS: Specialized or advanced training in science, electronics or related field 1+ years related experienceEDUCATION: Bachelor's degree in technical or scientific field or equivalent experience Please respond with your updated resume and contact information to hr@dawarconsulting.com/***************************

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Adhere to General Work Requirements as required in coordination with Quality leadership. Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft. Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft. Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer. Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership. Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained. Perform walk around inspection of aircraft for release from maintenance. Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service. Train, coach and mentor employees in the performance of duties in area(s) of qualification. Provide data to customers as requested. Qualifications US Citizenship or authorized to work in the U.S. without visa sponsorship You hold a current and valid FAA Airframe and Powerplant License . You bring at least 5 years of hands-on maintenance experience working on corporate or commercial jets . You've worked on Bombardier aircraft for at least 1 year . You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment. You're skilled at planning and problem-solving , ensuring that challenges are resolved efficiently and commitments are met. You make decisions with a strategic mindset , keeping broader business goals in view while seizing opportunities. You thrive in a team-based environment , working well with others to get the job done. You have a strong “Get It Done” attitude , staying focused and driving results-even in the face of change. You're customer-focused , committed to understanding needs and building strong internal and external relationships. You're passionate about growth and development -both your own and that of those around you. You're comfortable using a wide range of measuring tools and hand tools , and can operate and interpret test equipment with confidence. You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.). You're proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms. You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved. You communicate clearly and effectively in English-both spoken and written . You have the ability to train, coach, and mentor others , helping team members grow and succeed in their roles. Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Interview with the Hiring Manager Offer Letter : We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge!

When applicable, Bombardier promotes flexible and hybrid work policies. **Why join us?** Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. **Bombardier's Benefits Program** With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: + Insurance plans + _Dental, medical, life insurance, disability, and more_ + Competitive base salary + Retirement savings plan + Employee Assistance Program **What are your contributions to the team?** + Responsible to ensure all airworthiness quality requirements are performed and documented in accordance with all applicable regulations in regards to maintenance, preventative maintenance, repair and alteration of aircraft, engine and aircraft components/parts for which the Repair Station is rated. + Adhere to General Work Requirements as required in coordination with Quality leadership + Conduct weighing procedure in accordance with manufacturers recommended practices and procedures + Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt + Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) + Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements + Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity + Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained + Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) + Perform walk around inspection of aircraft for release from maintenance + Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service + Provide data to customers as requested **How to thrive in this role?** + You have a minimum 3 years aircraft maintenance experience or substantiated equivalent experience + You have a minimum of 2 years of corporate / commercial jet experience + You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools + You have A&P Certification + You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment + You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements + You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc) + You have working knowledge of return-to-service procedures + You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification **Now that you can see yourself in this role, apply and join the Bombardier family!** Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. **Job** Quality Inspector **Primary Location** Learjet Inc., Tucson 3050 **Organization** Learjet Inc **Shift** **Employee Status** Regular **Requisition** 7542 Quality Inspector

Job Description Geometrics Engineering is seeking qualified QA Pavement Inspector(s) / Resident Project Representative(s) (RPR) to join our team in multiple locations across the United States. This critical role supports our airfield construction program(s), focusing on runway and taxiway rehabilitation projects. The QA inspector / RPR will ensure quality assurance by monitoring, documenting, and verifying construction field activities, ensuring compliance with project specifications, plan sets, FAA requirements, quality standards and specific client requirements. Responsibilities Support the Construction Manager and/or Resident Engineer to deliver high-quality airfield construction projects. As an on-site Resident QA Inspector/ Project Representative (RPR). ensure that construction activities adhere to project specifications, quality standards, and FAA requirements. Conduct thorough inspections and observations of contractor/subcontractor activities, ensuring alignment with approved construction plans, safety standards, and quality assurance and quality control (QA/QC) protocols. Verify utility installations in accordance with project requirements including but not limited to storm drain, underdrain, airfield electrical, and associated structures. Provide consistent updates on construction progress, noting any deviations and corrective measures taken. Verify and review as-built documentation for accurate project records. Utilize construction management software (e.g., Procore, Unifier). Coordinate and facilitate access for Air Operations Area (AOA) activities. Ensure contractor compliance with client's safety, environmental, and FAA regulations. Be proactive in identifying and addressing potential safety issues, ensuring all construction work aligns with strict safety protocols. Qualifications Verified construction QA inspection experience, with a focus on airfield projects. Asphalt, concrete and utility experience preferred. Strong capability in interpreting construction plans and specifications. Prior experience on airfield improvement projects within active AOA environments is highly preferred. Proven ability to develop effective working relationships with contractors, proactively resolve field issues, and communicate any concerns to the construction manager and Resident Engineer. Detailed daily report writing, capturing weather conditions, labor force, equipment usage, materials quantities, QA/QC testing summaries, and any discussion with field personnel and contractors. Valid driver's license. Ability to obtain airport badge that may include a Criminal History Records Check (CHRC) and Security Threat Assessment (STA). Proficiency in MS Office. Strong written and verbal communication skills, with an ability to maintain detailed, accurate project documentation.

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR's Top 500 list alongside the nation's top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for a Level II NDT/ CWI Technician in our Tucson, AZ office. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties • Test and inspect using NDT and or CWI procedures on construction job sites. • Prepare daily reports on observation and testing activities • Review reports and test data for accuracy and completeness Job Requirements: Candidate must have a minimum qualification of Level II certifications Gamma Radiography Testing (RT) Magnetic Particle Testing (MT) Candidate must meet the following minimum requirements: Work related experience in utility and/or industrial construction Current State card or ASNT-IRRSP Documented education and on-the-job training Good communication and report writing skills Clean motor vehicle record Pass a pre-employment drug screen Complete a FBI fingerprint criminal background check or TWIC card Additional preference given for candidates with the following certifications: Certified Welding Inspector (AWS) Ultrasonic (SWUT / PAUT) Liquid Penetrant (PT) Physical Demands Physical examination required to obtain medical clearance to work Ability to stoop, kneel and to routinely lift and carry 50 pounds Clean driving record and capable of being insured for driving company vehicles Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information General Description: The Quality Assurance Inspector reports to the Quality Assurance Supervisor. The Quality Assurance Inspector is required to review products for compliance to drawing and specification requirements throughout the manufacturing operation. This position requires a strong attention to detail and good organizational skills. Visual acuity equivalent to Jaeger 1 and 20/40 minimum vision, corrected or uncorrected, is required. Primary Responsibilities: Perform visual, dimensional, and 1st article inspections on rubber and composite components Generate and assemble document packages for shipment of product Monitor calibration cycles of process and test equipment Maintain clean and organized work area and files Control and maintain inspection supplies Support quality assurance functions throughout the facility Education and Experience Requirements: High school diploma or equivalent Technical school a plus, but not required Minimum of three (3) years' experience in quality assurance or inspection preferred (preferably in an aerospace environment is a plus) Proficiency with standard measurement equipment (calipers, micrometers, gauges, etc.) Technical drawing and document interpretation skills required Basic computer skills are required Special Tasks and Focus Areas: Perform visual, dimensional, and 1st article inspection on rubber and composite components Inspect molded product to blueprint and specification requirements Inspect sub-assembly and piece part components Generate and assemble document packages for shipment Request, review, generate and approve certifications for components to specification requirements Generate necessary data packages to customer requirements Monitor calibration cycles of process and test equipment Review test equipment for necessary service and validation intervals Maintain clean and organized work area and files Keep orderly and organized records and reference specifications Control and maintain inspection supplies Support quality assurance functions throughout the facility Perform 1st article and PLT inspections Perform inspections in other departments when applicable Work requested overtime as necessary to support Operations Support Customer Source Inspections through interaction with Customer representative including answering questions and providing documentation. “AA/EOE/W/M/Vet/Disable” R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as protected veteran, among other things, or status as qualified individual with disability.

The **Aircraft QC Inspector (Technical Inspector) (UH-60)** Inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty. + Inspects removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. + Performs scheduled and special inspections. + Inspects and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. + Inspects forms and records related to aircraft maintenance. + Inspects defective parts of the aircraft. + Plans, conducts, and supervises aircraft technical inspections, including repairs and modifications to aircraft structures, structural components and engines. + Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. + Participates in maintenance test-flights and operation checks as required. + Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration. + Performs additional duties, including maintenance duties, as requested. + Adheres to company policies and safety programs (Safety-first mentality). **Minimum Requirements** + High School Diploma or equivalent is required. + U.S. military technical school or specialized training course is desired; certification of education level is required. + **Valid up-to-date A&P license with IA** **_(preferred_** **)** + Shall have **five (5) years' aviation maintenance** experience, **five (5) years rotary wing aircraft** experience, and **two (2) years on the assigned Mission Design Series (MDS) UH-60** . + All Mechanic experience must be within the six most recent years. + Shall have **five (5) years of recent applicable aircraft maintenance** experience. Shall have at least **one year's experience inspecting MDS aircraft assigned UH-60** . + **All Inspector experience must be within the ten most recent years** . + **Back shop TI shall have at least one year's experience on components being inspected.** + **Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P)** **_(preferred)._** + Valid Driver's License. + **Must provide own tools/toolbox.** Recruiters will provide toolbox requirements to candidates upon selection. + If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20. **Clearance Requirements** + **Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance.** + **Must be able to obtain and maintain facility credentials/authorization.** + **US Citizenship is required for facility credentials/authorization to work at this facility.** **Knowledge & Skills** + Thorough knowledge of aircraft systems on the assigned MDS. + Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). + Advanced knowledge of technical publications and Logistics Information Systems. + Able to prioritize workloads to maintain schedules on assigned projects + Possess the level of experience to inspect all required aeronautical-type maintenance to be performed by aircraft mechanics. + The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. + Exceptional communication skills, leadership abilities, and personnel management skills are required. + Ability to communicate effectively, both verbally and in writing. **Physical Requirements/Working Environment** + Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. + Must be able to climb stairs, ramps, ladders, and work stands. + Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. + May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. + Must be able to type using a standard keyboard to communicate through e-mail and various software applications. + Will handle dirty parts and lubricants. + Will be required to wear proper Personal Protective Equipment (PPE). + Must be able to pass a Respirator Physical and Fit Test qualification. + May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. + May work in maintenance shop or outside. + Must be able to work in a shop where the environment is drafty, noisy, and dirty. + May be exposed to extreme noise from operating equipment. + May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. + May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Subsidiary: KIRA Services / T&H Services Job Title:Quality Control Inspector Labor Category: Non-Exempt Clearance Level: No - Public Trust / Tier 1 (As Applicable) Travel Requirement: 50% At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Perform quality system audits and verifications of contractual specifications and applicable regulations in direct support of the CBP AZ Regional Facility Maintenance and Repair project site. Responsibilities: May perform any combination of the following duties: Conduct onsite inspections and audits on contract requirements, and other services performed. Schedule inspection activities. Prepare and maintain reports and support the development of quality plans. Document and track daily operations by using a computer maintenance programs(e.g., Maximo). Follow prescribed quality assurance/quality control procedures. Read and understand contract documents including plans and specifications. Adhere to company policies, procedures, and safety regulations. Perform other duties as assigned. Minimum Requirements: The technicians shall have 3 years' experience performing Quality Control inspections on building equipment and systems. Previous Journeyman-Level work experience in the commercial construction industry in the skilled trades including Electrical, Carpentry, Plumbing, HVAC. Must be able to travel to different site locations (Tucson/Yuma) to provide in-person support. Proficiency in Microsoft Office Suite (Word, Excel, Outlook); experience with work order systems such as Maximo preferred. Effective written and verbal communication skills. Must be able to satisfactorily complete a Tier 1 Public Trust background check, if required for the position. Must be able to maintain the ability to access the government worksite. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Ability to sit or stand for extended periods while working at a computer or desk. Frequent use of hands for typing, data entry, and handling paperwork. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work is performed in and around maintenance activity, which may include exposure to typical industrial or facility operations environments. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law. Reasonable Accommodation: If you have a disability or medical condition and need reasonable accommodation, please inform the designated recruiter during the hiring process.

* The Quality Control Technician primary functions are to assure sterilization operations meet the quality system requirements, product is released to sterilization and shipping after review of documentation and assisting core team with quality issues. * This position will also provide training, guidance and input on quality issues to the sterilization floor. This position will also audit compliance to the quality policy and procedures. * The incumbent will participate in continuous improvement and other plant initiatives as needed in support of business goals. Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Primary Responsibilities: * Performs review of sterilization documentation * Releases product to the next stage of shipping * Follows up on sterilization process issues/findings with appropriate parties, support investigation and suggest corrective actions. * Initiate and/or respond to correction and preventive action reports. Document quality system failures and improvement activities. * Conduct routine product and process audits to assure compliance to the quality system. * Perform complete inspection of product according to applicable specifications. * Reports issues to the Supervisor Sterilization Assurance * Responsible for internal documentation updates in SAP when applicable. * Document all inspections as required * Update all reports and databases as required for reporting and tracking purposes * Possess knowledge of Quality System Regulations and control charting defect trends in product quality. * Ensure sterilization associates are properly trained in documented inspection techniques, methods, work instructions * Trend quality metrics and take action to address problems and achieve departmental objectives * Attend, actively participate in, and successfully complete training sessions as needed + specified. * Other duties as assigned (supporting site initiatives, internal or external audits, as part of audit team members) Additionally: * Support and act as Lead point person for audit and/or change control on Laboratory. Provide information in a timely manner, with relevant system evidence (e.g., Master data export, direct screen sharing with auditors, etc.). * Achieve safety, quality & manufacturing/sterilization shared goals through successful delivery of key business objectives and metrics. Safety: * Participate fully to achieve the department's safety goals. * Maintain a clean and safe work environment. * Take responsibility for own safety. * Hold self-accountable to follow all safety policies & procedures * Debrief accidents & implement solutions to eliminate root cause. * Hold team members to safety standards/regulations & policies. Education and Experience: * High School diploma or GED + 2 years of previous quality experience * May have additional certificates and/or bachelor's degree in technology, Engineering, Business, or a closely related field. * Experience with Quality SAP Everest * Computer Skills Excel, Word * High degree of discipline and demonstrates attention to detail. * Proven organizational skills and ability to plan + organize work efficiently. * Good understanding of requirements, QSRs, GLPs, ISO, FDA Guidelines, as well as any other regulations * Strong verbal, communication and interpersonal skills are required: capacity to listen and understand users and stakeholder's expectations * Must be able to work independently, but work in team environment as need it, give and receive feedback. * Demonstrates personal drive and accountability to meet deadlines per project plan. * Demonstrates ability to solve problems, effectively manages risks and/or escalates as needed within established governance framework, strong sense of urgency. * Ability to provide operational support and autonomously address questions / inquiries from various plant (site) associates. * Maintains professional working knowledge and key skills expertise current (up to date). Travel: * Travel may be required for training and/or development purposes and based on business need. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work Location USA AZ - Tucson - Valencia Road Additional Locations Work Shift

Are you eager to help shape the future of mobility and contribute to sustainability? Then Vossloh is the right place for you. Join our team and be part of innovative solutions that drive positive change in the transportation industry. Manufacturing Production manages or assists with managing various production activities (e.g., assembly, material forming/shaping, processing, treating, or packaging, etc.) including: •Planning, directing, and monitoring production to meet established specifications, schedules, volume/cost/wastage targets, and quality standards •Planning, prioritizing, and managing production line maintenance/downtime to minimize disruptions Your contact person Navarrette, Florence

Summary•The Quality Control Technician primary functions are to assure sterilization operations meet the quality system requirements, product is released to sterilization and shipping after review of documentation and assisting core team with quality issues. •This position will also provide training, guidance and input on quality issues to the sterilization floor. This position will also audit compliance to the quality policy and procedures. •The incumbent will participate in continuous improvement and other plant initiatives as needed in support of business goals.Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Primary Responsibilities: Performs review of sterilization documentation Releases product to the next stage of shipping Follows up on sterilization process issues/findings with appropriate parties, support investigation and suggest corrective actions. Initiate and/or respond to correction and preventive action reports. Document quality system failures and improvement activities. Conduct routine product and process audits to assure compliance to the quality system. Perform complete inspection of product according to applicable specifications. Reports issues to the Supervisor Sterilization Assurance Responsible for internal documentation updates in SAP when applicable. Document all inspections as required Update all reports and databases as required for reporting and tracking purposes Possess knowledge of Quality System Regulations and control charting defect trends in product quality. Ensure sterilization associates are properly trained in documented inspection techniques, methods, work instructions Trend quality metrics and take action to address problems and achieve departmental objectives Attend, actively participate in, and successfully complete training sessions as needed + specified. Other duties as assigned (supporting site initiatives, internal or external audits, as part of audit team members) Additionally: Support and act as Lead point person for audit and/or change control on Laboratory. Provide information in a timely manner, with relevant system evidence (e.g., Master data export, direct screen sharing with auditors, etc.). Achieve safety, quality & manufacturing/sterilization shared goals through successful delivery of key business objectives and metrics. Safety: Participate fully to achieve the department's safety goals. Maintain a clean and safe work environment. Take responsibility for own safety. Hold self-accountable to follow all safety policies & procedures Debrief accidents & implement solutions to eliminate root cause. Hold team members to safety standards/regulations & policies. Education and Experience: High School diploma or GED + 2 years of previous quality experience May have additional certificates and/or bachelor's degree in technology, Engineering, Business, or a closely related field. Experience with Quality SAP Everest Computer Skills Excel, Word High degree of discipline and demonstrates attention to detail. Proven organizational skills and ability to plan + organize work efficiently. Good understanding of requirements, QSRs, GLPs, ISO, FDA Guidelines, as well as any other regulations Strong verbal, communication and interpersonal skills are required: capacity to listen and understand users and stakeholder's expectations Must be able to work independently, but work in team environment as need it, give and receive feedback. Demonstrates personal drive and accountability to meet deadlines per project plan. Demonstrates ability to solve problems, effectively manages risks and/or escalates as needed within established governance framework, strong sense of urgency. Ability to provide operational support and autonomously address questions / inquiries from various plant (site) associates. Maintains professional working knowledge and key skills expertise current (up to date). Travel: Travel may be required for training and/or development purposes and based on business need. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work LocationUSA AZ - Tucson - Valencia RoadAdditional LocationsWork Shift

What we do: Paragon develops and produces innovative solutions for the most demanding life support and thermal control challenges in the space and defense markets. Whether it is deep space, low earth orbit, undersea, or on the ground, our systems and hardware provides safe and comfortable environments for astronauts, explorers, military personnel, and unmanned space and terrestrial vehicles. Summary of Position: As a Quality Inspector, you will work hands-on in a production setting and utilize lean manufacturing concepts to assess products, processes, mechanical, electro-mechanical, and bio-tech systems. Inspect product from production, suppliers, or other Paragon sites to validate workmanship, measured dimensions and Quality System documentation that conforms to product requirements. Accountable ownership to the non-conforming documentation process for hardware that does not meet product specifications or compliance requirements Facilitate the disposition of parts non-conforming to inspection plans or program requirements Support other areas of Quality as required Required skills: Ability to interpret product specifications, GD&T measurement requirements to drawings/blueprints and engineering documents Able to use calibrated inspection and precision measurement equipment to validate dimensions or features Basic Computer/MS Office skills Effective written and communication skills Work independently/self-motivated, with the ability to collaborate as part of a functional team Strong understanding of Geometric-Dimensioning & Tolerancing specification ASME Y14.5 Preference is 5 years minimum of aerospace inspection experience, certification to an industry standard is an acceptable equivalent Familiarity with AS9100 standards and practices Application of Critical thinking, practical problem solving and Root Cause Analysis skills Capable of working in a fast-paced and collaborative environment Desired Skills: Knowledge of SAP or other ERP software PCDMIS experience Ability to program ROMER ARM CMM utilizing PCDMIS Experience working in aerospace, spacecraft, or missile production Specific aerospace inspection, control of nonconformity and First Article Inspection Familiarity or certification to American Society of Quality standards

When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier's Benefits Program With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: * Insurance plans * Dental, medical, life insurance, disability, and more * Competitive base salary * Retirement savings plan * Employee Assistance Program What are your contributions to the team? * Adhere to General Work Requirements as required in coordination with Quality leadership. * Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft. * Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft. * Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer. * Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership. * Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained. * Perform walk around inspection of aircraft for release from maintenance. * Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service. * Train, coach and mentor employees in the performance of duties in area(s) of qualification. * Provide data to customers as requested. How to thrive in this role? * You have a current and valid FAA Airframe and Powerplant License * You have at least 5 years aircraft (corporate or commercial jet) maintenance experience * You have a minimum of 1 year experience on Bombardier aircraft * You have a minimum of 1 year experience as an aircraft Quality Inspector * You can apply planning and problem solving to resolve issues and meet commitments * You utilize strategic thinking in making decisions/seizing opportunities in the context of business objectives * You are a team player in order to partner effectively with others in order to achieve results * You have an attitude of "Get It Done" in completing work and making change happen to achieve objectives * You have customer orientation in order to satisfy internal/external customer expectations and develop partnerships * You have the ability to develop yourself and others to be and do their best * You can use a variety of measuring tools and basic hand tools with ability to interpret/operate test equipment * You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements (FAR, CAA. RSM/QCM, FAA, AD, SB, CFR, TCDS, etc) * You have working knowledge of computer software programs (Excel, Access, Word, Quality Maintenance Tracking, SAP, internet, AMS) * You have thorough knowledge of return-to-service procedures and applicable SAP programs * You have the ability to communicate clearly and succinctly in both verbal (English) and written form * You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification Now that you can see yourself in this role, apply and join the Bombardier family! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Job Quality Researcher Inspector Primary Location Learjet Inc., Tucson 3050 Organization Learjet Inc Shift Employee Status Regular Requisition 7543 Quality Researcher Inspector

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Adhere to General Work Requirements as required in coordination with Quality leadership. Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft. Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft. Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer. Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership. Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained. Perform walk around inspection of aircraft for release from maintenance. Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service. Train, coach and mentor employees in the performance of duties in area(s) of qualification. Provide data to customers as requested. Qualifications US Citizenship or authorized to work in the U.S. without visa sponsorship You hold a current and valid FAA Airframe and Powerplant License. You bring at least 5 years of hands-on maintenance experience working on corporate or commercial jets. You've worked on Bombardier aircraft for at least 1 year. You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment. You're skilled at planning and problem-solving, ensuring that challenges are resolved efficiently and commitments are met. You make decisions with a strategic mindset, keeping broader business goals in view while seizing opportunities. You thrive in a team-based environment, working well with others to get the job done. You have a strong “Get It Done” attitude, staying focused and driving results-even in the face of change. You're customer-focused, committed to understanding needs and building strong internal and external relationships. You're passionate about growth and development-both your own and that of those around you. You're comfortable using a wide range of measuring tools and hand tools, and can operate and interpret test equipment with confidence. You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.). You're proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms. You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved. You communicate clearly and effectively in English-both spoken and written. You have the ability to train, coach, and mentor others, helping team members grow and succeed in their roles. Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Interview with the Hiring Manager Offer Letter: We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge!

The Aircraft QC Inspector (Technical Inspector) (UH-60) Inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty. Inspects removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Performs scheduled and special inspections. Inspects and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. Inspects forms and records related to aircraft maintenance. Inspects defective parts of the aircraft. Plans, conducts, and supervises aircraft technical inspections, including repairs and modifications to aircraft structures, structural components and engines. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. Participates in maintenance test-flights and operation checks as required. Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration. Performs additional duties, including maintenance duties, as requested. Adheres to company policies and safety programs (Safety-first mentality). Minimum Requirements High School Diploma or equivalent is required. U.S. military technical school or specialized training course is desired; certification of education level is required. Valid up-to-date A&P license with IA (preferred ) Shall have five (5) years' aviation maintenance experience, five (5) years rotary wing aircraft experience, and two (2) years on the assigned Mission Design Series (MDS) UH-60. All Mechanic experience must be within the six most recent years. Shall have five (5) years of recent applicable aircraft maintenance experience. Shall have at least one year's experience inspecting MDS aircraft assigned UH-60. All Inspector experience must be within the ten most recent years. Back shop TI shall have at least one year's experience on components being inspected. Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P) (preferred). Valid Driver's License. Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20. Clearance Requirements Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Knowledge & Skills Thorough knowledge of aircraft systems on the assigned MDS. Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). Advanced knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects Possess the level of experience to inspect all required aeronautical-type maintenance to be performed by aircraft mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Exceptional communication skills, leadership abilities, and personnel management skills are required. Ability to communicate effectively, both verbally and in writing. Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.