Quality control inspector jobs in Chico, CA - 1,554 jobs

Job Title: Quality Inspector Duration: 06 Months contract (Potential Temp to Perm) Payrate: $23.75/hr. Shift: 2nd shift, Mon-Fri, 1:45pm-10:15pm Description: Responsible for performing and recording dimensional and visual inspection of parts, assemblies, and final product in coordination with the Engineering, Production, and Manufacturing Engineering departments. Responsibilities: Conduct all levels of product inspections using a variety of inspection instruments and equipment (e.g. CMM, micrometers, calipers, parallels, sine bars, height masters, optical comparator, Johnson gauges, etc.) Verify compliance of finished hardware with drawing requirements based on shop practices as they relate to unfinished hardware. Perform both detailed, assembly-level drawings with appropriate supporting documentation verifying actual results against drawing and/or specification requirements. Correctly read and interpret detailed, assembly-level drawings and customer specifications. Use shop mathematical calculations relative to the complexity of the project (e.g., GD&T, tolerance stack-ups, calculations for areas, angles, lengths, etc.) Execute formal first article reports to AS9102 standards. Mentor inspectors, as needed. Use statistical process control (SPC) symbols and tools along with correct interpretation of associated control plans and charts. Meet deadlines of assigned jobs while maintaining the integrity of the position. Work closely with customer representatives during source inspections and audits. Seek lean process improvements. Requirements: High school diploma/GED 1 year certificate from college or technical school OR 3-5 years related experience and/or training US Citizenship required Skills: Good written and verbal communication skills Excellent problem-solving and analytical skills Keen attention to detail Ability to understand and conform to internal company procedures. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Familiarity with but not limited to: Database, Basic windows/internet browser, ERP/Inventory, Microsoft Office - Excel, Word, Power Point, Blueprint Reading, GD&T Terminology and Symbols, Material finishes, Raw Materials, Mechanical Inspection Blueprint reading capabilities Ability to lift 40lbs Teamwork and collaboration

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shear wave)/MT will be conducted upon hiring. The position will be supporting clients in the Los Angeles area. ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shear wave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

A global technology company is seeking a Hardware Engineering Manager in Sunnyvale, California. This hybrid role emphasizes leading a team to ensure high-quality hardware for networking products. Candidates should have a Bachelor's in Electrical Engineering or Computer Science, with 3+ years in hardware leadership and a strong customer focus. The position includes managing multiple projects and driving hardware quality improvements. Competitive compensation based on experience, ranging from $130,500 to $300,000 annually. #J-18808-Ljbffr

A construction safety company based in California is seeking a Traffic Control Associate responsible for managing traffic around work zones. Applicants must possess a valid California Driver's License and demonstrate strong interpersonal skills. The position involves coordinating traffic flow, setting up safety equipment, and ensuring the safety of all personnel involved. Potential candidates should have a high school diploma and experience in a similar role is preferred. We offer competitive wages and a robust benefits package. #J-18808-Ljbffr

Essential Duties and Responsibilities Include the following (other duties may be assigned): Perform visual inspections of structural steel fabrication, welding and bolting. Perform material identification, verification and sampling of unidentified steel Prepare reports and other related documents in accordance with good engineering practices and applicable building codes Communicate and document discrepancies in work inspected to steel shop and field crews and to SALEM engineers. Complete appropriate documentation in a timely and accurate manner Understand and utilize safe working practices Preferred Certifications CWI (Certified Welding Inspector) Certification ICC Structural Steel & Welding Special Inspector and ICC Structural Steel & Bolting Special Inspector certifications are a plus Requirements Minimum of 5 years of welding inspection experience preferred CWI and ICC certifications maintained current and in good standing Valid driver's license and clean driving record required Ability to use Microsoft Office Suite to submit reports on company templates Must be able to lift a minimum of 50 lbs. Must be able to work off ladders and scaffold at construction sites English speaking, reading and writing required Job Type: Full-time

People Drive Our Success Are you enthusiastic, highly motivated, and have a strong work ethic? If yes, come join our team! At Cathay Bank - we strive to provide a caring culture that supports your aspirations and success. We believe people are our most valuable asset and we proudly foster growth and development empowering you to achieve your professional goals. We have thrived for 60 years and persevered through many economic cycles due to our team members' drive and optimism. Together we can make a difference in the financial future of our communities. Apply today! What our team members are saying: Video Clip 1 Video Clip 2 Video Clip 3 Learn more about us at cathaybank.com GENERAL SUMMARY Responsible for review/callback of new loan bookings, renewals, monetary transactions, maintenance, and other loan servicing activity. Ensure loan servicing activity follows established procedures, data entry is accurate, and proper support is obtained. ESSENTIAL FUNCTIONS Review of new loan bookings, renewals and modifications ensuring loans are entered into the servicing system accurately. Review of loan maintenance ensuring the compliance with the loan terms and supporting documentation. Review of designated monetary transactions for accuracy, proper authorization, validating computations, such as interest adjustments, prepayment calculations, etc. Review of servicing activities, such as demands and collateral releases, for compliance with established bank policies and procedures. Review ARM/variable rate adjustments and payment changes, including other system automated activity ensuring calculations are according to the loan documents. Instructs staff on finding that require correction/review and confirms proper correction. Maintains callback and exception report documentation in an organized and accessible manner as evidence of review and correction. Supports internal/external audits and examinations providing supporting documentation in a timely manner. Completes all special projects as requested. QUALIFICATIONS Education: High school diploma or equivalent; some college courses a plus. Experience: 3 years of commercial loan servicing experience required Skills/Ability: PC literate, proficiency with MS Office General knowledge/proficiency of IBS loan system a plus Able to work in a fast pace environment while maintaining a high level of accuracy Strong organization skills, able to prioritize work Detail oriented Strong problem-solving skills Strong verbal and written communication skills OTHER DETAILS $26.44 - $31.25 / hour Pay determined based on job-related knowledge, skills, experience, and location. This position may be eligible for a discretionary bonus. Cathay Bank offers its full-time employees a competitive benefits package which is a significant part of their total compensation. It is our goal to provide employees with a comprehensive benefits package to fit their needs which includes, coverage for medical insurance, dental insurance, vision insurance, life insurance, long-term disability insurance, and flexible spending accounts (FSAs), health saving account (HSA) with company contributions, voluntary coverages, and 401(k). Cathay Bank may collect personal information from potential job candidates and applicants. For more information on how we handle personal information and your applicable rights, please review our Privacy Policy. Cathay Bank is an Equal Opportunity and Affirmative Action Employer. We welcome applications for employment from all qualified candidates, regardless of race, color, ethnicity, ancestry, citizenship, gender, national origin, religion, age, sex (including pregnancy and related medical conditions, childbirth and breastfeeding), reproductive health decision-making, sexual orientation, gender identity and expression, genetic information or characteristics, disability or medical condition, military status or status as a protected veteran, or any other status protected by applicable law. Click here to view the "Know Your Rights: Workplace Discrimination is Illegal" Poster: Poster- English Poster- Spanish Poster- Chinese Traditional Poster- Chinese Simplified Cathay Bank endeavors to make **************************** to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact, Mickey Hsu, FVP, Employee Relations Manager, at or . This contact information is for accommodation requests only and cannot be used to inquire about the status of applications.

The Receiving Inspector II performs inspection of purchased parts, materials, components and equipment as materials are received from vendors or subcontractors. Responsibilities Conducts detailed dimensional and visual inspections on critical parts, assemblies, and raw material, including first piece, in-process, incoming, and final. Inspection involves using tools such as; calipers, micrometers, gauges, optical comparator, and more Works from drawings, sketches and specifications. Adapts inspection measuring devices and procedures where necessary Documents inspection findings and produces the necessary documentation/reports, establishing acceptance or rejection Determines or assists in determining methods, sequences and procedures necessary for inspection Works on assignments that are moderately difficult, requiring judgment in resolving issues or in making recommendations Other duties as assigned Basic Qualifications (Required Skills & Experience) Minimum High School diploma or GED equivalent is required. Vocational school or Technical training is preferred or equivalent combination of education, training, and experience Minimum 2 - 4 years of mechanical inspection experience Demonstrated knowledge of the requirements, maintenance, and implementation of ISO 9001 and/or AS9100 guidelines required Experienced using tools such as calipers, micrometers, gauges and optical comparator This position requires traveling to the supplier sites within 100 miles Must have a valid driver's license and clean DMV record Other Qualifications & Desired Competencies Demonstrated familiarity with source inspections and/or audits is desired Demonstrates intermediate to advanced drawing interpretation skills Demonstrates understanding of geometrical tolerancing and dimensional measurements Strong computer skills and proficiency in MS Office Suite needed to document findings and produce inspection reports Is highly motivated, committed to high quality standards, and be able to function with minimal supervision Demonstrates competency in reading, comprehending, and ensuring compliance to internal standards, drawings, and customer requirements Exhibits strong interpersonal, written and verbal communication skills Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork and puts the success of the team above one's own interests Physical Demands Ability to work in an office and manufacturing environment (Constant) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level No Clearance The salary range for this role is: $23 - $32 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview Under the direction of the Task Order Manager, the Quality Control Inspector is responsible for conducting inspections to ensure compliance with contract requirements and Quality Control and Safety Plans. Pay Rate: $26.74/hourly Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Review all site work to verify compliance in accordance with applicable plans and procedures. * Inspect and diagnose problems to determine corrective actions/repairs. * Inspect work in progress and finished work for discrepancies in accordance with the QC and applicable Safety Plans, and contract requirements.Complete necessary inspection reports and documentation required to support findings. * Assist in preparing Safety incident and hazard reports as required. * Maintains accurate administrative records. * Review all site work to verify compliance in accordance with applicable plans and procedures. * Respond to emergency site maintenance as required. * Ensures proper housekeeping practices are strictly observed. * Maintain open communications with personnel. * Performs other duties as assigned by the supervisor. * Other duties as assigned. Accountable For: * Tools and equipment within his or her possession. * Using PPE when required. * Timely completion and accuracy of all work. * Working closely and harmoniously with fellow workers. * Adherence to all Safety rules and regulations. Job Requirements Mandatory: * Working knowledge of Microsoft Programs, including but not limited to: Outlook, Word, PowerPoint, and Excel or equivalent software program. * Understanding of Government contracts, correspondence, reports, and records. * Knowledge of generally accepted standards of workmanship in custodial services. * Excellent communication skills, both oral and written. * Excellent organizational skills. * Mature judgment and ability to work with little or no supervision. * Ability to communicate ideas effectively with personnel at all levels. * United States Citizen. * High School Diploma or Equivalent. * Ability to pass pre-employment background check and drug screen. * Must be able to read, write, and speak English fluently. * Valid driver's license with excellent driving record (Must provide current driving record). * Ability to obtain access to U.S. Government Installations through the Defense Biometric Identification System (DBIDS). Preferred: * 2 yrs custodial experience. * Two-year degree in Safety, Industrial Hygiene, or a related field or broad experience in the same or similar areas. * Bilingual - Spanish Working Conditions: * Work is performed indoors and outdoors. Outdoor work is subject to temperature extremes and inclement weather conditions. * Work hours are subject to change, with overtime, weekend and/or holiday work as needed. * Subject to hazards that may cause personal bodily harm; diseases, cuts, bruises, burns, common cold, influenza, dust odors and elevated noise levels. * Tasks may be performed on uneven, inclined, hard and soft carpeted floors, cement structures and surfaces. * While performing duties of this job, the employee is occasionally required to stand and/or walk for long periods of time, sit, use of hands and fingers, handle, or feel objects, tools or controls, reach with hands and arms, climb stairs, climb ladders, balance, stoop, kneel, crouch or crawl, talk, hear, or smell. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision. May be required to operate regular and specialized vehicles. Physical Requirements: * Must be able to lift to 50 lbs. * Must be able to climb stairs and ladders as required. * Must be able to load/unload materials, tools, and equipment. * Involves walking, bending, stooping, twisting, and reaching. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Step into Your New Role Kleinfelder Construction Services is seeking an experienced Lead Roadway Inspector to perform quality assurance inspection services on transportation-related road and highway improvement projects in the Inland Empire. The Lead Roadway Inspector will be assigned a field vehicle and gas card, reporting to a construction job site(s), with the ability to work extended shifts and nights as needed. The initial assignment is for a bus rapid transit project in Ontario. Job Duties * Lead a team of field inspectors coordinating inspection between multiple jurisdictions and municipalities * Perform quality assurance inspection and documentation of civil (roadway) construction activities under the direction of a Resident Engineer * Coordinate construction activities with various property/business owners within the proximity to the project; provides verification of adherence to temporary construction easements * Issue field directives to the Contractor; attend weekly construction meetings; coordination of the construction schedule and notifications with the public outreach team * Coordinate Quality Assurance materials sampling and testing * Verify the implementation of the Contractor's Quality Control Program and adherence to plans and specifications * Prepare detailed Daily Inspection Reports, with photos, accurately reflecting the construction progress * Measure, calculate, track, and record pay quantities for monthly estimates * Assist in maintaining, supporting, and promoting a safe work environment while complying with applicable safety rules, policies, and procedures * Maintain a set of field as-built drawings * Assist the Resident Engineer with field input on change orders, RFIs, submittals and response letters to the contractor, and as-built drawings Qualifications/Skills * High school diploma or equivalent. Associate degree preferred. * Minimum of ten (10) years of demonstrated experience in roadway construction inspection of highways or major public works projects including traffic control, PCC and AC paving, earthwork, grading, drainage, and signing and striping * Knowledge and experience with equipment used in construction inspection, surveying and field testing of construction materials. * Knowledge and experience with principles of effective communication and supervision * Able to work independently, make effective decisions concerning construction work in progress and solve field problems * Able to direct the efforts of subordinate inspectors Additional Preferred Qualifications 1) BS degree in Civil Engineering and/or EIT 2) Caltrans inspection experience 3) Proficient in the use of Microsoft Office programs 4) Knowledge of Caltrans standard plans, specifications, procedures, and Construction Manual 5) Ability to assist the Resident Engineer in all aspects of required field and office construction engineering work including, but not limited to the following: * Experience in the inspection of traffic control system compliance * Experience in Water Pollution Control Program (Storm Water Pollution Prevention Plan) enforcement * Knowledge and experience with equipment used in construction inspection, surveying, field testing of construction materials, and construction office engineering * Knowledge of computers, computer applications, and computer software programs such as Microsoft Office (Word, Excel, PowerPoint, and others) * Knowledge and experience with principles of effective communication and supervision * Ability to work night shifts for an extended duration Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. Salary range: $34.73 - 57.96/hr. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder. #LI-SF1

Job Description Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part may evaluate new procedures for non-standard rest and perform special set-up on new equipment assist others in correcting or preventing deficiencies in quality or workmanship give work direction to other inspectors know your customers expectations and drive action to meet them perform first article process identify component perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: Attention to detail Communication skills - verbal and written Organizing Judgement Data collection, management and analysis Team work Ability to interpret complex customer rules and regulations Demonstrated skills in project management and ability to train others to lead projects Works well independently Excellent interpersonal and communication skills Ability to mange time and prioritize multiple task in a fast paced environment Proficient in use of MS Office applications, MS Project, Outlook May require international travel and international business experience Knowledge of Lean manufacturing fundamentals

Career-defining. Life-changing. At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career About This Role: The 2nd Shift Quality Control (QC) Inspector is responsible for supporting manufacturing operations during second shift by performing inspection, documentation review, and batch release readiness activities for finished goods and sub-assemblies. This role focuses on reviewing batch records, travelers, and routers, ensuring Good Documentation Practices (GDP) compliance, identifying quality issues, and initiating nonconformances (NCs) when required. The QC Inspector also provides Receiving Inspection (RI) support as needed to ensure material flow continuity and compliance with inspection requirements. Why This Role Is Critical * Provides real-time quality oversight on second shift, ensuring batch records, travelers, and GDP compliance are verified at the time of execution rather than retrospectively. * Enables timely identification and containment of nonconformances, reducing quality escapes, rework, and compliance risk. * Supports on-time release readiness and uninterrupted manufacturing flow, preventing inspection and documentation backlogs into first shift. * Strengthens audit readiness and cross-shift continuity, ensuring clear handoff and sustained control of quality issues across shifts. What You WIll Be Doing Batch Record, Traveler & Router Review * Perform detailed review of batch records and travelers for finished goods and sub-assemblies to ensure completeness, accuracy, and compliance with approved procedures. * Verify that all required manufacturing steps, inspections, testing reports, in-process checks, and approvals are properly completed and documented. * Ensure material traceability, including material lots, subassemblies, equipment identification (when applicable), and inspection status. * Access and reference the electronic Quality Management System (eQMS) to ensure the current, approved revisions of drawings, specifications, procedures, and work instructions are used during inspection and batch record review activities. * Verify that batch records, travelers, and inspection activities are executed against the correct released document revisions, and escalate discrepancies when outdated or incorrect documents are identified * Identify documentation errors, omissions, or discrepancies and ensure timely correction in accordance with GDP requirements. Finished Goods & Sub-Assembly Inspection * Perform in-process, final, or verification inspections of finished goods and sub-assemblies per approved inspection plans and work instructions. * Ensure inspection results are accurately recorded and aligned with acceptance criteria. * Support timely review and release readiness of manufacturing lots to maintain production flow. Nonconformance Identification & Escalation * Identify, document, and initiate Nonconformance (NC) records when inspection results, documentation, or material conditions do not meet requirements. * Ensure nonconforming material is properly identified, labeled, and segregated to prevent unintended use. * Escalate quality issues to Quality Control leadership and Manufacturing supervision as required. Good Documentation Practices (GDP) Compliance * Enforce GDP standards across all reviewed records, including batch records, travelers, routers, and inspection forms. * Ensure corrections, clarifications, and late entries (when applicable) are performed per approved GDP procedures. * Support identification of recurring documentation issues and participate in corrective actions or retraining as needed. Receiving Inspection (RI) Support * Perform Receiving Inspection (RI) activities when required, following approved sampling plans, inspection criteria, and procedures. * Verify material identification, lot traceability, and acceptance status. * Accurately document RI results and communicate material status to Manufacturing and Quality teams. Compliance & Audit Readiness * Perform all activities in compliance with ISO 13485, and internal QMS SOPs, DOP's and work instructions. * Maintain inspection areas and records in a state of audit readiness. * Support internal audits and regulatory inspections by providing accurate records and inspection evidence as requested. Cross-Shift & Cross-Functional Communication * Communicate inspection results, documentation issues, and open quality concerns clearly during shift handoffs. * Collaborate with Manufacturing, Quality Engineering, Receiving, and first-shift QC personnel to ensure continuity of quality controls. What We Want to See * High School Diploma or GED required; Associate's or Bachelor's Degree in a technical or life sciences field is preferred. * Minimum of 2-5 years of experience in a medical device manufacturing, pharma, aerospace or regulated manufacturing environment, preferably in Quality Control or Inspection. * Experience navigating an electronic Quality Management System (eQMS) to review and reference released drawings, specifications, SOPs, and work instructions * Working knowledge of Good Documentation Practices (GDP) and controlled document execution. * Experience reviewing batch records, travelers, routers, and inspection records. * Ability to identify quality issues and initiate nonconformance records in accordance with established procedures. * Strong attention to detail with a focus on accuracy, compliance, and data integrity. * Ability to work independently on second shift with minimal supervision. * Effective verbal and written communication skills. * Ability to manage multiple tasks and prioritize work to support production needs. Ways to Stand Out * Experience performing Receiving Inspection (RI) or FAI activities. * Familiarity with sampling plans, inspection plans, and acceptance criteria. * Demonstrated experience reviewing engineering drawings, including GD&T, to identify critical-to-quality (CTQ) characteristics, specification notes, and applicable inspection requirements, and applying them during inspection and batch record review * Experience using enterprise resource planning (ERP) systems (e.g., QAD, SAP) to support manufacturing execution, batch review, material status, and traceability is a plus Location: Orange County Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location. Estimated Pay Range $21.15 - $26.44 As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY. For more information, see *********************************************************************************** and *****************************************

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Perform routine sampling and testing of aggregate materials to ensure compliance with quality standards. * Document and communicate test results to operations and quality teams. * Assist in troubleshooting production issues related to material quality. * Maintain and calibrate laboratory equipment and ensure proper testing procedures. * Support continuous improvement initiatives in product quality and process efficiency. What Are We Looking For * Strong attention to detail and commitment to quality assurance. * Ability to follow standardized testing procedures and safety protocols. * Effective communication skills and ability to work collaboratively. * Basic computer proficiency for data entry and reporting. * Willingness to learn and adapt in a fast-paced industrial environment. Conditions of Employment * Successful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check. * Must be eligible to work in the United States without sponsorship. Work Environment * Shift Hours: 7pm - 3am * Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. Physical Demands of the Job * Ability to lift and carry up to 50 pounds regularly. * Frequent standing, walking, bending, and climbing in outdoor and industrial settings. * Manual dexterity required for operating testing equipment and handling materials. * Visual and auditory acuity to safely navigate work areas and monitor equipment. * Ability to wear required personal protective equipment (PPE) for extended periods. What We Offer * Starting Pay $24.63 per hour DOE * 401(k) retirement savings plan with an automatic company contribution as well as matching contributions * Highly competitive benefits programs, including: * Medical, Dental, and Vision along with Prescription Drug Benefits * Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) * AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance * Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled #HMSWJobs

Bring your experience working in a warehouse as a Quality Control for an outstanding facility in Chico, CA. Uses weight and volume measuring instruments and makes precise measurements. Knows how to identify oils and mix blends. Handles and pours oils. Labels bottles; Packages products. Prepares packages for shipment. Affix shipping labels. Ensures labels are correct. Requirements: Quality control exp. Bilingual in English and Spanish Able to work long hours, stand, and pay attention to details. Pay: $18.00 plus Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun Safety and attendance incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website, *********************** Please select a branch near you or call our office at ************ Stop in and see our experienced, bilingual, and friendly staff today at 2201 Pillsbury Rd., Unit 108, Chico, CA 95926. Advance Services is an equal opportunity employer

Duties and Responsibilities: Perform inspections of purchased parts according to acceptance criteria using standard sampling plan. Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies. Physical, mechanical and/or electrical measurements in compliance with the company Quality System. Accurately document results of inspection / testing and maintain controlled document files, logs and test records. Inspect cables per wiring configuration. Initiate non-conformance process and assist in resolving non-conformances. Monitor receiving inspection backlog. Able to be flexible with the work schedule. Process SAP transactions to segregate and disposition non-conforming product. Other duties and responsibilities in the Quality Department as assigned. Ability to conduct basic troubleshooting and problem resolution. Education and Experience: High School Diploma or Equivalent. Preferred one year of experience in an FDA regulated environment and/or ISO 13485 standards in the medical device industry and/or in-vitro diagnostics preferred. Technical and physical position requirements: Familiar with measuring equipment such as micrometer, caliper height gauges, plug gauges. Able to lift at least 35 lbs. Strong attention to details and ability to understand and follow complex procedures. Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook. Effective and clear written and verbal communication skills in English language. The US base salary range for this full-time position is $20.60 - $31.60. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time RegularColleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job Description Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Job Posted by ApplicantPro

Quality Control Inspector II/QC Lead BH Job ID: 3313 SF Job Req ID: 15820 Quality Control Inspector/Lead - 1st Shift (OT may be required) About Us Haskel is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary * This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. * Performs receiving , in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. * Identify accurate and efficient means of inspection techniques. * Works with general/minimal supervision. * Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities * The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. * Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. * Creates supporting documentation (data books, certificates of conformance, etc…) * Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. * Verifies first articles from suppliers and internal departments. * Prepares and processes records and reports to document supplier/operations performance. * Qualify supplier components and/or systems for assuring conforming product. * Adheres to calibrations system of inspection, measuring and test equipment. * Applies Statistical Quality Control techniques as directed. * Assist with interpretation of drawings, specifications and quality requirements. * Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. * The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. * Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. * Use basic problem-solving skills to ensure stable operation of the quality control cell. * Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. * Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. * Observe, maintain, coordinate and complete standard work. * Update production metrics and facilitate regular team communication. * Identify and support continuous improvement efforts with Quality management. * Sustain and drive lean manufacturing and 5S activities. * Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications * Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. * Experience with Microsoft Office (Word, Excel, Outlook). * Ability to communicate effectively through oral and written communications. * Ability to analyze and solve problems. * Ability to work with others collaboratively. * Strong organizational skills. Preferred * Experience leading teams or projects strongly desired. * Quality Control experience. * Lean manufacturing and continual process improvement experience. Educational Requirements * High School diploma or equivalent * Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; * Medical and Prescription drug plans * Wellness and Chronic disease management programs * Dental, vision, life/AD&D insurance * Short- and Long-term disability * Health Savings Account * Flexible Spending Account * Parental Leave * Employee Assistance Program * Discount Program * Employee Stock Grant * 401k plan with a company match * 3 weeks of paid vacation and 11 paid holidays throughout the calendar year * Voluntary benefits include legal, accident, and critical illness protection At Ingersoll Rand we foster inspired teams. As a powerful and progressive global industrial company, we are looking for talented candidates with a bias for action and an entrepreneurial spirit to join our team. Our employees are empowered to act as owners every day for our customers, our communities and themselves. We offer a broad range of opportunities to build a successful and rewarding career with an innovative company. Join us at the new and exciting Ingersoll Rand. Ingersoll Rand Inc . (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers, and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity, and efficiency. For more information, visit ************* Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances.

Job Description Job Title: Business Development Center Representative Department: Business Development Center Reports to: BDC Director FLSA Status: Non-Exempt Position Description: Communicates with customers through email and phone calls in order to schedule appointments for customers to visit the store by performing the following duties. Duties & Responsibilities: Responds to customer requests from the Internet lead system and gathers information from the customer about the make, type, and quality of vehicle desired; trade in details; customer's goals “Mines” the existing customer database for new and/or additional customer interest in additional vehicle purchases, contacting such customers by email, phone, and text messages Researches and develops lists of potential clients. Identifies and qualifies business opportunities Follows up on sales leads and makes cold calls to potential clients. Schedules appointment with customer to visit the dealership to meet with a salesperson who will then conduct the steps of the sale. Consults regularly with the Internet Director. Follows an owner follow-up system that encourages repeat and referral business and contributes to customer satisfaction. Follows a prospect development system and sends follow up emails and makes follow up calls to those potential customers. Follows established prospecting steps and procedures. Remains knowledgeable of new products, features, accessories, processes, etc. Attends sales meetings and training sessions as scheduled. Meets, or exceeds, written forecast and projection numbers. Other duties as assigned. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience: High school diploma or general education degree (GED); or one to three months' related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to communicate orally or in written form effectively with co-workers, potential and current clients,. Ability to read, analyze and interpret written and verbal instructions. Ability to write routine reports and correspondence, including writing grammatically correct emails and text messages. Ability to effectively present information and respond to questions from managers, clients, and customers. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, and percentages. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate the ability to anticipate and solve practical problems or resolve issues. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to work 5 days a week, 8 to 10 hours per day. The employee is regularly required to talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is frequently required to sit or stand as needed. May require walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder heights, below the waist or lifting as required to file documents or store materials throughout the workday. May include lifting up to 25 pounds for files, computer printouts on occasion. The employee must have excellent keyboarding skills. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to an office work environment. The noise level in the work environment is usually moderate. Primary environment: ambient room temperatures, lighting and traditional office equipment as found in a typical office environment. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. ______________________________ ________________ Signature (Employee) Date ______________________________ ________________ Signature (Supervisor) Date