Quality control inspector jobs in Cincinnati, OH

Job Titles: Quality Inspector Shift time: Monday - Thursday - 2nd shift - 3:30pm - 2am Performs new and routine inspections, checks, tests and sampling procedures of standard parts. Responsible for receiving, in-process, or final inspections as required. Duties and Responsibilities Responsible for utilizing aptitude in measurement techniques, metrology, and blueprint reading and verify operators are accurately measuring and recording dimensions on IP sheets or other documentation. Perform first article and first piece approval for operators. Perform inspection duties for in-process and final inspection. Complete and review non-conformance documentation. Support quality improvement and cost savings initiatives, as required. Assist Quality Engineers, as required. Assist in other production areas, as needed. Perform other quality or document control duties, as assigned. Perform part measurement on CMM.

Our client, a global leader in the pharmaceutical manufacturing industry, is seeking a QC Analyst to join their team! - Pay: $25-30/hr ($25/hr for entry level/recent graduate) - Shift: 1st shift M-F GENERAL DESCRIPTION: The QC Analyst I performs testing of samples submitted to the laboratory in a cGMP compliant manner, as well as according to approved written procedures. The QC Analyst I may be required to write or revise SOPs, analytical procedures, or other analytical documentation at the discretion of quality control supervisory staff. KEY DUTIES: Perform testing in accordance with written procedures (i.e. USP/EP/JP grade) Documentation of laboratory activities including worksheet/notebook entries according to procedures that define laboratory documentation practices. Processing of electronic data using procedures that ensure data integrity and security. Ship samples to contract testing facilities. Entry of test results from contract laboratories Review and countersign (when necessary) logbooks, notebooks, and worksheets for the purpose of verifying compliance with written procedures, good documentation practices, data integrity and accuracy of calculations. Transcribe results onto analysis reports. Perform daily standardization and performance verifications on laboratory equipment. Comply with site-wide procedures including but not limited to change control, documentation, deviation reporting, cGMP compliance, safety, and electronic data security. Identify deviations to written procedures. Disposal of laboratory waste on an as needed basis. Identify and report unsafe conditions within the laboratory. Identify OOS results, atypical results, and atypical laboratory events requiring a laboratory investigation; perform investigative testing. SKILLS/ABILITIES: Ability to perform routine analysis, such as wet chemistry and operate basic laboratory equipment. Understands paperwork review process. Ability to follow written procedures and exhibit excellent documentation practices. Basic laboratory knowledge and skills analytical techniques in wet chemistry/chromatography Practical experience with various types of laboratory instrumentation Troubleshooting skills with analytical methodology and instrumentation. Technical writing skills Employee must be able to pass a vision exam prior to employment and annually thereafter. PERSONAL ATTRIBUTES: Proactively achieves results for the best of the organization. Willingness to learn new things. Ability to function in a small company atmosphere. Ability to cope with a rapidly changing work environment. Commitment to teamwork. Commitment to continuous improvement in all areas. Ability to focus attention to details and ensure high quality work. Ability to work safely; seek out and encourage safe practices Responsible for managing their time, organizing their workload to be efficient, and have good organizational and communication skills EDUCATION AND EXPERIENCE: Bachelors Degree in Chemistry with 0-2 years of laboratory experience. Other fields of specialty in Sciences are also acceptable provided sufficient chemistry coursework is completed. This job description is a complete list of all desired skills, but not all are required. We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Demonstrated oral and written communication skills required * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information clearly to others in writing and verbally in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, move throughout the facility, use hands, reach with hands and arms, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #3201761025 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

TempToFT Quality Inspector Rate: $18-22/hr Hours: 7am-3pm Wilmington, OH C-D Responsibilities: - Inspects raw materials, parts, component, and finished product for compliance with dimensional and performance specifications using established inspection plans. - Use handheld measuring equipment and with working knowledge of at least 1 advanced measurement system (e.g., CMMs, optical comparators). - Statistical sampling using an inspector's rule. - Read comprehend simple instructions, short correspondence, and memos. - Documents inspection observations and reports non-conformances in the computer system. - Use ERP computer system. - Operate forklifts. - Safely lift and transport up to 50 lbs. over short distances. Requirements: - High School diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience - Availability for shift work and overtime as needed - Close vision (corrected or uncorrected) with peripheral, depth perception and color vision capability - Three years of on-the-job experience - Ability to write simple correspondence - Ability to speak effectively before groups of customers or employees of organization - High school level reading, writing and comprehension proficiency - Inspector 1 math skills - Ability to read, understand, and analyze product requirements against the actual product for purposes of evaluation If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

Responsibilities: Conduct visual inspections for compliance and quality standards Perform part and serial number verification Record inspection data into tracking systems Follow safety and quality protocols at all times Skills and Industry Experience: 1+ years (inspection, inventory control, or quality-related roles) High school diploma or equivalent (technical degree preferred); ability to read/interpret technical drawings, part numbers, and inspection documents; basic computer/data entry skills computer/data entry skills ASQ Certified Quality Inspector (CQI) or OSHA Safety Training preferred Ability to work well in independent and group problem-solving situations Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events Flexibility in scheduling Job type: 1099 contract Project Duration: Typically 1-2 day assignments Note: This is a 1099 contract role - project duration may vary based on client needs Shift Hours: Note: As a 1099 contractor, project schedules may vary depending on site availability Ability to commute to Columbus, OH Compensation: $20.00 - $30.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Quality Control Inspector Make sure the military gets the best product available by joining our team of expert inspectors! First and second shift positions are available! FUNCTION: Inspect castings, forgings, fabrications, assemblies and machined workpieces for conformance to specifications and blueprints, using standard and precision measuring devices/instruments, formulas and shop mathematics. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints and engineering specifications to obtain product information, such as specified material, surface finish, and dimensions. Computes angles, radii, and other unspecified dimensions of workpiece. Measures dimensions, such as length, height, distance and angles using standard and precision measuring instruments such as CMMs, micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, ultrasonic equipment and profilometer. Inspects first run parts, including fabrications and assemblies. Write reports regarding inspection and testing results. Position castings, forgings or finished parts on surface plate and layout reference points and centerlines. Examine defective parts to determine cause of defect and recommend changes or modifications. REQUIRED EDUCATION/KNOWLEDGE: High school diploma or GED is required. Two years of related quality inspection based experience is preferred. Training in Statistical Process Control (SPC) data collection techniques and evaluating is preferrable. REQUIRED EXPERIENCE/SKILLS: Experience in a manufacturing environment using various standard measurement gages, preferably in aerospace or defense contracts. Proven problem-solving skills, with proven ability to establish an effective course of action. Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

At CTS, we're not just applying coatings- we're solving complex challenges for industries that demand precision, durability, and innovation. If you're someone who thrives on quality, takes pride in detail, and enjoys contributing to a high-performance team, we want to meet you. We're currently hiring Quality Control Inspectors at our Blue Ash, Ohio location. This role is essential to ensuring every part we produce meets the highest standards and exceeds customer expectations. What You'll Do Conduct final visual and dimensional inspections of completed parts, verifying that all required operations, tests, and documentation are complete. Use precision tools and equipment to take accurate measurements. Complete and sign off on routers and certificates of conformance. Maintain a strong focus on safety, quality, and continuous improvement. Support other tasks and team needs as required. Requirements Age 18 or older High School Diploma or GED Must be a U.S. Person under ITAR/EAR regulations (able to provide a U.S. Passport, Permanent Resident Card, Birth Certificate, or Naturalization Certificate) Ability to pass a background check and DOT drug screening Strong attention to detail and decision-making skills Available Shifts Weekend Shift: Friday-Sunday, 9:00 AM-9:30 PM Bonus Points If You Have 1+ year of experience in inspection, especially in aerospace, thermal spray, or coating environments D.S.Q.R. certification We believe in potential. If you're excited about this role but don't meet every requirement, we still encourage you to apply. Let's grow together. Why CTS? We offer a competitive benefits package designed to support your health, well-being, and future: Medical, dental, vision, life, short and long-term disability insurance 401(k) with company match Paid Time Off & Paid Holidays Tuition Reimbursement Employee Referral Program Company-sponsored events and celebrations About CTS CTS is a leader in advanced coating technologies. We specialize in transforming tough challenges into high-performance solutions. From R&D to manufacturing and application services, our team is dedicated to helping customers grow and succeed in a rapidly evolving world.

QUALITY INSPECTOR DEPARTMENT: Quality REPORTS TO: Quality Manager PURPOSE: This position is responsible to insure the quality of the customer products through competent and efficient inspection in support of manufacturing. DUTIES/RESPONSIBILITIES: Follow all Quality Department inspection procedures for first article, in-process and final inspections Support all manufacturing concerns in a timely manner Set-up gages for floor inspection Follow tag system Fill out, stamp and sign Quality Inspections Log and file quality records E2 documentation - daily time reporting Carry out all other duties as assigned REQUIREMENTS: High school diploma or equivalent or 6 months experience in a similar position The ability to read and understand prints, routers and quality plans and to communicate the information contained Must be able to use, maintain and calibrate all common measuring instruments including caliper, micrometers, height gages and bore gages Capable of following and using the tag system, completing inspection reports and filing quality records An ability to learn additional measuring systems including CMM inspection/programming and to operate computers WORK ENVIRONMENT: While performing the duties of this job, the employee may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud when on the shop floor. This position also has a role in a professional office environment which routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. HEALTH AND SAFETY: Work in compliance with the Occupational Health and Safety Act and regulations. Follow Company safety rules. Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately. Maintain a clean and safe work area. PERSONAL PROTECTION REQUIREMENTS: Use or wear the equipment, protective devices or clothing that is required to be used or worn (When applicable to work environment): Safety shoes Safety glasses Hearing protection Other types of PPE as needed

The Quality Inspector is an entry-level position responsible for performing inspections on final products, assisting with the development of weld and assembly work instructions, and supporting the administration of weld qualification tests. This role works closely with experienced quality staff, production teams, and supervisors to ensure products meet company standards and customer requirements.Key Responsibilities Inspection Perform visual and dimensional inspections of final products using basic measuring tools (tape measures, calipers, gauges). Verify that parts and assemblies meet engineering drawings, specifications, and quality standards. Record inspection results and report non-conformances to the Quality Manager or supervisor. Assist in re-inspecting corrected items to confirm they meet requirements. Work Instructions Help create and update simple weld and assembly work instructions under the guidance of senior staff. Take photos and document production steps for clarity in work instructions. Assist in organizing and maintaining work instruction files for easy access by production staff. Weld Exam Support Assist in scheduling and setting up welder qualification and requalification tests. Help maintain basic records of welder certifications. Support the Quality Manager in distributing and collecting test materials. General Quality Support Maintain cleanliness and organization in inspection and testing areas. Participate in basic quality training to develop skills in inspection techniques and standards. Support other quality-related projects as assigned. Qualifications Required: High school diploma or equivalent. Strong attention to detail and accuracy. Basic math skills and ability to use a tape measure and hand tools. Willingness to learn welding symbols, inspection methods, and quality standards. Ability to follow written and verbal instructions. Preferred (but not required): Experience in a manufacturing or fabrication environment. Familiarity with welding processes or shop drawings. Basic computer skills (Word, Excel, email). Physical Requirements Ability to stand, walk, bend, and perform inspections for extended periods. Lift and carry up to 40 lbs as needed. Work in a manufacturing environment with exposure to welding, grinding, and assembly operations. Work Environment This role will work primarily on the manufacturing floor with some office time for documentation and training. Safety equipment will be provided and must be worn when required.

Do you think you can MAKE THE CUT? Apply today to join our team! Kett Tool Company has a long standing history in the production and manufacturing of specialty power tools in Cincinnati, Ohio since 1940. From our product line of shears, saws, and nibblers, we provide quality and power to contractors, builders, and manufacturers across a multitude of industries. With over 70 years of experience, we make tools that you will find nowhere else. Our Mission Our people and our customers are our priority. Through innovation, service, and a focus on quality we strive to deliver the best product and experience. Culture We promote an employee-first culture where you are appreciated, valued, and empowered to work together to promote our corporate mission. The Kett Tool brand and our team stand for integrity, accountability, and impact. We Want You Are you ready to make an impact? If you challenge yourself to grow and learn every day, we want you. Do you want your ideas to promote innovation? If you are excited about improving processes and thinking outside of the box, we want you. Are you a team player? If you work well with others and enjoy a collaborative workplace and culture, we want you. Do you say what you mean and mean what you say? If you conduct yourself with honesty, integrity, and accountability, we want you. Benefits/Offerings All full time employees are eligible for our benefits program. Benefit offerings include: Medical Vision Dental 401K Paid Medical Leave Policies Education Assistance Program Company Sponsored Short Term Disability, Long Term Disability, and Life AD&D coverage Personal and Vacation Time Job Title: Quality Inspector I Department: Quality Reports to: Quality Engineer FLSA Status: Non- Exempt Purpose The purpose of the Quality Inspector is to perform inspections on incoming, in-process, and final materials/components to verify that such meet required quality specifications. Primary responsibilities Inspect and measure incoming materials/components using established quality standards and documentation for each part Inspect and measure start-up and in-process components using established quality standards and documentation for each Inspect and measure final components and products using established quality standards and documentation for each part Read engineering drawings and instructions to comprehend the quality expectations for the product and supplies Approve or reject parts based on quality requirements Assist Quality Engineer in performing First Article inspections as needed Assist Quality Engineer and other management personnel in identifying in-process or supplier trends Assist Quality Engineer and other engineering/management personnel in identifying opportunities for improving processes and procedures related to quality and material flow Responsible for maintaining a safe work environment Competencies and Skills Ability to learn, understand, and effectively apply sampling plans Excellent attention to detail with a quality mindset Self-motivated and able to work with minimal supervision Ability to work in a team environment Willingness to take further technical training in areas required to improve job skills when necessary Ability to use a computer or tablet to process transactions Ability to read and interpret mechanical drawings, industry specifications and work instructions Basic knowledge of measuring instruments such as calipers, micrometers, bore micrometers, height gauges, etc. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the primary responsibilities of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is mostly in a sitting position but will occasionally be required to walk and lift up to 50 lbs. Occasionally required to climb, balance, stoop, kneel, crouch, and walk. Occasionally move up to 100 pounds using a pallet jack. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision and ability to adjust focus. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions, fume or airborne particles. The employee is frequently exposed to moving mechanical parts. The noise in the work environment is moderate to loud. The primary responsibilities of this job involve working in a warehouse facility with exposure to both heat and cold. Other Duties This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Kett Tool Company, a division of Endurance Industries, is an equal opportunity employer: qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex, national origin, citizenship status, disability status, protected veteran status, age, marital status, sexual orientation, gender identity, genetic information, or any other characteristic protected by law. If a qualified individual with a disability or disabled veteran needs a reasonable accommodation to use or access our online system, that individual should please contact us at ************

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. This individual has the responsibility and authority to carry out assigned tasks. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.

Join trak group in partnering with a growing client in Fairfield, Ohio that's expanding its All team. Job Title: Contract Quality Inspector - Mechanical Job Description: We are seeking a skilled Contract Quality Inspector with expertise in mechanical systems to join our team at our Fairfield, Ohio location. The Quality Inspector will be responsible for ensuring that all mechanical components and products meet quality standards and specifications. Key Responsibilities: - Conduct inspections of mechanical components and assemblies to ensure compliance with engineering specifications and quality standards. - Utilize precision measurement tools and equipment to perform detailed inspections. - Interpret engineering drawings and specifications to identify quality requirements. - Document inspection results and maintain accurate records of findings and corrective actions. - Collaborate with engineering and production teams to address quality issues and implement improvements. - Assist in the development of quality control procedures and inspection plans. - Participate in internal and external audits as required. Required Skills: - Strong knowledge of mechanical inspection techniques and quality standards. - Proficiency in using precision measurement tools such as calipers, micrometers, and gauges. - Ability to read and interpret engineering drawings and specifications. - Excellent attention to detail and problem-solving skills. - Strong communication skills for effective collaboration with cross-functional teams. - Experience with quality management systems and documentation. Qualifications: - High school diploma or equivalent;technical training in mechanical inspection preferred. - Previous experience in a mechanical quality inspection role. - Familiarity with industry standards and best practices for quality assurance. Contract Details: - This is a contract position with competitive hourly compensation. - Flexible working hours with potential for overtime as needed. Apply today to join our team and contribute to maintaining high-quality standards in our mechanical products and components! If you're ready to take the next step in your career and want to make an impact, partner with trak group to explore this opportunity.

Mattr delivers advanced material technologies and complex manufacturing expertise. Through a portfolio of brands, we offer highly engineered solutions, technology and products to support infrastructure markets worldwide. DSG-Canusa has been developing and producing high-quality heat shrink tubing, cold-applied accessories and heat shrink equipment for over 50 years. Driven by our long-term commitment to the research and development of outstanding materials, products and technologies, our mission is to lead the industry in manufacturing superior heat and cold shrink products that meet CGA, UL and other industry approved certifications. We proudly manufacture in Europe, North America, and China to provide strong regional and global supply chain options for our customers. Why Join Mattr? Multiple medical, dental & vision plan options (Blue Cross Blue Shield & VSP) Health Savings Account (HSA) with monthly company contributions 401(k) with dollar-for-dollar match, vested from day one Incentive bonus plans + paid vacation & sick leave Employer-paid Life, AD&D, and Long-Term Disability insurance Wellness incentives Free Employee Assistance Program (EAP) Discounts on fitness, shopping & travel (Blue365, LifeMart & more) Year-round permanent work at one location with tools, PPE & safety training Onsite parking + staff social events POSITION SUMMARY: The Quality Inspector is responsible for quality on the production floor and working toward keeping all nonconforming products and processes in house. DUTIES: Support the corrective and preventive action process by conducting lap tests (Hot set, Melt Index, Optical Comparator / Shadowgraph, Calipers, Micrometers) and other lab equipment as needed. Test materials and products and create COAs Facilitate the closure of internal NCRs. Audit the production process. Review and approve incoming raw material COA's / COC's. Assist in calibration compliance & equipment verifications. Collect and compile quality data. Assist in the development of test methods and inspection plans. Train the production team on quality control measures to improve product excellence. REQUIREMENTS: Minimum 3-5 years of related experience in Quality inspection. Previous manufacturing experience. High School Diploma or Equivalent required. Quality Inspection & Auditing experience. IATF 16949 Experience - preferred. Computer Software (Microsoft SharePoint, Suite, Minitab, etc.) Basic understanding of inspection equipment (Hot set, Melt Index, Optical Comparator / Shadowgraph, Calipers, Micrometers) and other lab equipment as needed. #IND1 WHAT MATTR OFFERS • At Mattr, safety comes first! We go the extra mile to ensure our employees are safe and healthy • We understand times have changed and so have we. Mattr offers flexible work arrangements (where possible) to suit your needs • Comprehensive total rewards package that includes competitive salaries, annual incentives, medical benefits, retirement savings plans, paid vacation days, education assistance programs, corporate discounts and more! • Participation in service milestone awards and recognition opportunities • Access to mental health support resources such as our Headversity mental health and wellness platform and free, confidential access to our Employee and Family Assistance Program (EFAP) • Rewarding growth opportunities (may include global career and travel opportunities) supported by personalized training, development and mentoring programs • Commitment to providing a diverse, inclusive and accessible workplace environment • We prioritize our Environment, Social and Governance (ESG) values and offer a paid Impact Day, allowing employees an opportunity to support charitable organizations in their communities • Company events, social gatherings and team building activities that promote fun! • We're working to create a better world. Join us! Mattr delivers advanced material technologies and complex manufacturing expertise through brands offering engineered products, technology and solutions to support infrastructure projects & markets world-wide. Mattr brands: Shawflex, DSG-Canusa, Flexpipe and Xerxes. At Mattr, we have built a true team environment where all employees are empowered to contribute to the success of the company. We want you to join our team! #IND1

Job DescriptionQuickPro Staffing in Xenia is hiring for a Part-Time Quality Technician. We are seeking a detail-oriented Part-Time Quality Technician to join our team. This position is ideal for someone with prior inspection or quality experience in a manufacturing environment who is looking for a flexible part-time schedule. The role is conveniently located on the bus line, making it accessible for candidates who rely on public transportation. As a Quality Technician, you will perform inspections to verify that products and documentation meet required specifications for dimensions, quality, and appearance. Key Responsibilities Inspect in-process production and finished goods per internal and customer requirements. Read and interpret customer specifications and blueprints. Perform product audits, inspections, and documentation in support of PPAP, SPC, and MSA. Operate and program CMM inspection equipment; maintain inspection set-ups. Apply geometric tolerancing and solve trigonometric problems when required. Support corrective and preventative action programs. Maintain accurate technical records in support of ISO 9001 and TS16949 certification. Communicate effectively with customers, vendors, and cross-functional teams. Follow all company safety policies and procedures. Qualifications Associate's or Bachelor's degree in a related field preferred, or 3+ years of relevant inspection/quality experience. Strong knowledge of gauge metrology, PPAP, SPC, and MSA. Familiarity with ISO 9001 and TS16949 standards is a plus. Proficient in Microsoft Office (Word, Excel, Outlook). Ability to read blueprints and technical specifications. Strong written and verbal communication skills. Physical Requirements Ability to sit, stand, walk, and occasionally lift items per company guidelines. Requires close vision and the ability to adjust focus. Exposure to a production floor environment; stair access required. Why Join Us? Flexible part-time hours for work-life balance. Convenient location on the bus line. Opportunity to contribute to a quality-focused, professional team.

Job Details PJ Ohio Mfg Facility - Mt Orab, OH Full Time $17.00 - $20.00 Hourly DayQuality Control Inspector $17-$20 pr hour paid weekly/ Retention bonus $1000/ Attendance bonus of $3 per hour on the first 40 hours worked each week paid out as $240 bi-weekly. Benefits available after 60 days following the 1st of the month, including 80 hours of Paid Time off (PTO). Quality control inspectors' tasks include running tests, keeping a record of defects, analyzing products, and overseeing procedures. Quality control inspectors may work from a variety of locations, from assembly lines to the Shipping department. This may involve long hours of standing at a time, depending on the location. This job is well suited for people with an eye for detail, who have an aptitude for math, and who have technical skills. Duties and Responsibilities Checks the quality of trailers for Big Tex and PJ Trailers by conducting tests, monitoring production processes, and identifying malfunctions. Appropriate usage of all required PPE. Collaborates with the plant manufacturing team and operations staff to deliver the highest quality product possible. Tracks quality assessments to ensure the plant output meets expectations daily. Utilizes checklists, standard work, quality standards, engineering standards, and iAuditor templates to monitor the manufacturing process and report on plant quality KPI's. Follows product through the entirety of the manufacturing process to ensure each step is completed as intended. Performs detailed inspections of raw materials and final products and confirm they are manufactured to standard. Tracks, records, and maintains quality assurance data. Performs other duties as required. Required Abilities Ability to demonstrate organizational skills and pay close attention to detail. Ability to communicate effectively in written or verbal form. Ability to work in a fast-paced production environment. Ability to frequently lift, push, pull, and maneuver up to 40+ pounds. Frequently exposed to outside temperatures and weather. Continuously exposed to a manufacturing/industrial environment. Qualifications High school diploma or equivalent is required. Two years of experience in a manufacturing environment preferred. Good verbal and written communication skills. Mathematical skills. Attention to detail. Organizational skills

Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to:• Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary• Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored• Reading and following written and verbal work instructions• May work overtime and/or weekends as assigned Qualifications• HS diploma or GED equivalency• Steel toe shoes• Basic math skills• Detailed oriented • Follow verbal and written instructions• Provide accurate and complete information for required paperwork• Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us• Variety of work in various manufacturing plants and industries• Medical, Dental, Vision and Short-Term Disability, upon eligibility• Paid weekly• Six (6) paid Holidays, upon eligibility• Forty (40) hours of paid vacation, upon eligibility• Retirement Program, upon eligibility• Birthday, Work Anniversary and Employee of the Month recognition program• Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.

Full-time Description Join Our Team as a Quality Inspector at Empower Manufacturing! Are you a skilled Quality Inspector looking for a rewarding opportunity? At Empower Manufacturing, we value our employees and provide a supportive, team-oriented environment. If you're passionate about precision and quality, we'd love to have you on our team! Why Empower Manufacturing? Competitive pay Work-Life Balance: Enjoy a 4-day work week with optional overtime. Culture: A positive and supportive work culture. Check us out by Clicking Here! Work Schedule: 40 hours per week, Monday through Thursday. Monday - Thursday: 6:00am - 4:30pm. Fridays as needed. Our Fantastic Benefits! Medical, Dental, and Vision Insurance Company-paid Life Insurance Employee Assistance Program Dollar-for-dollar 401K match up to 4% 80 hours Paid Time Off Maternity / Paternity Leave 8 paid holidays Monthly Bonus Potential General Description of Duties: Interpret drawings Perform in process and final inspections Complete inspection checklist and accurately record data Electronically file records Upload inspection records to customers Review quality deviations with quality engineer, customer support, Quality Supervisor and/or Plant Manager Requirements Qualifications/Physical Demands: Experience interpreting drawings Knowledge of manufacturing inspection procedures Knowledge of geometric and dimensional tolerancing; drawing interpretation Ability to use micrometers, dial indicators, optical comparators, height gages, snap gages, gage blocks and pins Occasional stooping, kneeling, or crouching Constant standing and walking Occasional talking and hearing Frequent use of hands and arms to reach Must be able to lift and carry 25 lbs. and occasionally up to 50 lbs. Ability to see up close and have accurate depth perception Work Environment: The employee is regularly working near moving mechanical parts Join a company that puts Culture first. Check us out at empowermfg.com and see why Empower Manufacturing could be your next great opportunity!

Job DescriptionDescription: We are hiring and looking for a talented individual with hands-on experience in a QC role for a job shop/manufacturing environment position. Must have experience with quality inspections, blue prints, in process inspections, first article inspections, final inspections, and much more! Requirements: Must have 3 yrs + QC experience working in a manufacturing environment Must have 3+ years of experience with measuring instruments such as micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, etc. Faro Arm/Laser experience is highly preferred Must have very solid GD&T and math aptitude Must have a great work ethic, collaborative, team player Must have strong blue print reading skills Born in US, or INS certificate of naturalization REQUIRED Thanks for your interest in Magna Machine! EEO Disabilities/Veterans

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.