Quality control inspector jobs in Clarkstown, NY - 101 jobs

About the Brand: Founded in 1884, Breitling is a leading Swiss watchmaker. The innovative company defined the modern chronograph and pioneered the navigational tool watch. Today, it's still breaking new ground as a casual, inclusive, and sustainable luxury brand with more than 250 industrial loft-inspired retail locations around the world. Breitling's collections center around air, land, and sea pursuits, all captured in the brand's unmistakable modern-retro style. The exceptional quality of every watch movement is confirmed by its status as a COSC-certified chronometer, and the brand remains one of only a handful of independent watchmakers to produce its own manufacture calibers. Combining classic watchmaking with the latest innovations, Breitling is both a company with history and one that's ahead of its time. Position Summary: The Quality Control Technician is responsible for ensuring that all Breitling timepieces leaving the workshop fully meet the job card, brand standards, technical specifications, and customer expectations. This role acts as the final quality control before delivery, confirming that all functional, aesthetic, and customer-specific requirements have been completed accurately and consistently. The position plays a critical role in protecting brand integrity, reducing rework, and delivering an exceptional customer experience. Essential Duties and Responsibilities: Perform comprehensive final quality control inspections on mechanical and quartz Breitling watches prior to release. Verify correct completion of all technical interventions in accordance with Breitling specifications, service guidelines, and quality standards. Conduct functional checks including (but not limited to): timekeeping performance, power reserve, chronograph operation, calendar functions, and winding/setting performance. Perform aesthetic inspections including case, bracelet, dial, hands, crystal, crown, pushers, and overall finishing quality. Confirm water-resistance testing results and documentation. Ensure all customer-reported issues, service requests, and special instructions have been fully addressed prior to watch release. Validate accuracy and completeness of service documentation, QC records, and system entries. Identify discrepancies, incomplete repairs, or quality risks and escalate them promptly to the Workshop Manager or Technical Leader Adhere strictly to all Breitling policies, procedures, and technical guidelines. Ensure compliance with safety, security, and handling standards for our timepieces. Promote and uphold Breitling brand values, craftsmanship standards, and customer-centric culture. Perform additional reasonable duties as required by the Workshop Manager to support workshop operations. Participate in training, quality initiatives, and audits as required. Skills, Education and Experience: Self-motivated and well organized Attention to detail Understanding of customer expectations / requirements Able to manage targets, priorities and deadlines Excellent motivational and communication skills Able to work in a team environment Proactive problem solving Basic computer skills Good levels of concentration Good eye/hand coordination Strong manual dexterity Previous bench experience Trained watchmaker High School education or equivalent Note: This job description is not exhaustive and may evolve over time to meet the changing needs of the business. Inclusive Benefits: We offer a comprehensive range of benefits including: Medical, Dental, and Vision benefits FSA & HSA Group life insurance and disability benefits Paid parental leave and adoption support Wellness and Vision reimbursement Retirement Savings Plan (401k) with company match Paid Time Off Education Assistance Employee Assistance Program Commuter benefits Employee Discount Work Environment: The work environment characteristics described here are represented of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to sit; use hands to hold, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, or crouch. The employee must occasionally lift and/or move up to 20-40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Breitling is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, sex, sexual orientation, gender identity, race, color, creed, religion, ethnicity, national origin, citizenship, disability, marital status, military status, pregnancy or any other legally-recognized protected basis prohibited by applicable law.

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: Supporting Incoming, in-process and final inspection including customer source inspections Obtaining and upholding IPC credentials required of the position. Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. Verifying compliance of in-process material against Customer and Industry Standards Ensuring documentation is accurately recorded and collected. Escalating systemic issues to Quality and Manufacturing Engineering Supporting first-piece verification runs with accompanying documents. Documenting non-conformities to the process and specifications Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. Advocating proper ESD, PPE, and FOD prevention Required Qualifications: Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment J-STD-001 Class 3 and/or IPC 610 certified Physically able to spend up to 8 hours a day using a microscope Familiarity with IPC Industry Standards High-School Diploma Preferred Qualifications: Experience working in an ISO-9001 and/or AS9100 Quality System environment Operating appropriate inspection equipment; (AOI, XRAY, etc.…) Ability to communicate openly and effectively to provide real-time feedback Ability to work in a fast-paced team environment Customer-Focused, "Zero-Defect" Mindset Documentation Abilities Computer literacy Industry-Relevant Quality Inspection or Control experience Willingness to cross train in multiple Quality areas This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility. The ideal candidate will be responsible for ensuring that products meet specified quality and reliability standards through inspections, measurements, and testing. This role requires a solid understanding of mechanical drawings, measurement tools, and quality control processes. -Salary range- $22.00per hour- $25.00 per hour -Benefits: 401(k) Aflac Dental insurance/ Vision insurance Health insurance reimbursement Life insurance Paid time off -Full Time- 8am to 4:30pm, Monday-Friday Responsibilities Interpret engineering drawings, schematic diagrams, and technical documentation to determine quality and reliability standards. Collaborate with management and engineering teams to address quality concerns and establish inspection criteria. Compile and evaluate statistical data to monitor and maintain product quality and consistency. Conduct in-process and final inspections of rubber products using precision measuring instruments (e.g., calipers, micrometers). Document inspection results, report non-conformances, and assist in root cause analysis and corrective actions. Validate data or flag deviations from standards through reports and quality documentation. Maintain accurate records of inspections and test results. Ensure compliance with company and industry quality standards and safety regulations. Qualifications Qualifications: High school diploma or equivalent required; additional technical training or certifications in quality inspection preferred. Minimum 2 years of experience in a manufacturing or quality inspection role, preferably in the rubber industry. Ability to read and interpret mechanical and engineering drawings. Proficient with measuring tools such as calipers, micrometers, and other gauges. Strong math and analytical skills. Computer literate: familiarity with MS Office and quality management systems is a plus. Excellent attention to detail, communication, and documentation skills. Ability to work independently and in a team environment. Physical Requirements: Must be able to stand for extended periods and lift up to 50 lbs. Manual dexterity for operating measurement tools. Ability to work in a manufacturing environment with exposure to noise, machinery, and rubber materials. Company Website *********************************

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Job DescriptionDescription: : Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. "Offer of employment is contingent upon successfully completing DOT background check screening and drug testing required by federal regulation for this role." Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program Requirements:

Job DescriptionDescription: A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements: Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ where most valve and regulator products are manufactured. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: “Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment.” Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment Join our growing team and be a part of our journey! Generant is looking for a 3rd shift Quality Control Inspector Join our growing company! 3rd shift is Monday - Friday. 11:00pm - 07:30am Job Summary: The primary function of the Quality Control Inspector is to help assure the quality of finished goods and conformance to product requirements. This is accomplished by inspecting parts, checking calibration status of measurement devices, and documenting inspections and nonconformance. Essential Functions: · Conduct First Article Inspection and in-process inspections of products to ensure compliance with quality standards and specifications. · Maintain Calibration of Metrology Tools · Perform In-Process inspections, Final Inspection, Raw Material Inspection - Bar Stock, Inspection of Incoming Purchased Parts, and Outside Process Inspection · Data Entry into Quality Databases · Interpret mechanical drawings · Communicate product and material nonconformances to management. · Identify and report any deviations from quality standards to the appropriate personnel · Collaborate with production teams to resolve quality issues and implement corrective actions · Conduct root cause analysis and implement preventive measures to minimize defects and improve product quality · Maintain accurate records of inspections, test results, and quality documentation. · Assist in the development and implementation of quality control procedures and processes · Other duties as assigned Requirements Qualifications: Education/Experience/Skills: · High School Diploma or equivalent · 2+ years as a Quality Control Inspector in a manufacturing environment that produces metal pieces · Able to read and interpret engineering drawings · Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators · Advanced Math Skills · Strong knowledge of Statistical Process Control (SPC) techniques and tools · Familiarity with quality control standards and regulations · Must be able to work in a fast-paced environment · Excellent attention to detail and analytical skills · Ability to work independently and as part of a team · Fluent in English (Good Verbal and Written Communication Skills) · Ability to carryout detailed, written and verbal instructions Physical Demands: · Must frequently lift up to 25 pounds and occasionally lift up to 75 pounds · When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear · Employee is frequently required to reach with hands and arms · Employee is occasionally required to stand, walk, stoop, kneel, crouch, or crawl · Specific vision abilities require close vision, distant vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: · Inspector works near moving mechanical parts and is occasionally exposed to vibration · Noise level is usually moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Job Description : Freshline Produce LLC., a premium fresh fruit and vegetable processor based in Mahwah, NJ, is seeking a talented Quality Assurance Technician, for its 1st shift, to join its fast growing organization. This is perfect opportunity for a candidate looking to begin their QA career in the food industry. Responsibilities: Incoming Raw Materials/ Inspection/ Inform QA Manager and Operations Manager if there are quality issues. Fill out Receiving Log Identify, label, date, and make a daily inventory list of all WIP products in the coolers Production Line Quality Checks including product quality, case quality, Tsunami checks, Metal detector check and room temperature checks Practice and enforce GMP regulations - (Hand washing, no jewelry, no gum) Recognize and examine all inventory at all times Serve as member HACCP Team Requirements: Good communication, training and interpersonal skills Very detail oriented Strong problem solving skills Bi-lingual (English and Spanish) is preferred Experience in the food industry is a plus Effective organizational skill; Able to manage priorities and complexities Intermediate computer skills Proficiency with Microsoft Word, Excel and Outlook Strong multi-tasking skills

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

QUALITY CONTROL - WALDWICK NEW JERSEY START NOW !!!!!!!!!!!!!!!!!! ** We are looking for reliable and responsible candidate for warehouse associate in Waldwick. Pay rate: $13.50 (NEGOTIABLE DEPENDING ON EXPERIENCE) 2nd shift QA( Quality Assurance) Train for 2 weeks on 1st shift MONDAY - FRIDAY ( 7am-3:30pm) Regular hours MONDAY - FRIDAY 3pm-11:30pm OVERTIME AVAILABLE Must work weekends.( rotate) Requirements: Computer Knowledge, Inspecting Materials, Test Samples Able to stand all day performing this job. Bilingual is a plus Must have transportation Benefits offered - Health Care Sick Pay 401 k offered in 2021 MUST HAVE TRANSPORTATION!!!!!!!!!!!!!!!! Start now! Vaccinated

Goodwill NYNJ Ecommerce Quality Control - Part time Job Position To receive merchandise and sort & separate items based on quality standards for listing. • Receive incoming totes from stores & record seal information as directed. • Research items online for matching descriptions and value by using different market places. • Accept and reject items based on quality standards. • Use provided manifesting software to print SKUs and safely apply them to a variety of items. • Comply with production expectation. • May need to lift up to 50lbs. • Additional duties as required. • Minimum high school diploma. • Ability to read and write English. • Basic computer & internet research skills. • Ability to deal with change and work in a dynamic environment. • Able to work under minimal supervision and process the expected number totes per day. • Able to work as part of a team involved in the quality control of items for Goodwill's E-Commerce (Online) department. Duties will be performed in an industrial warehouse environment. This job requires you to stand/move for long periods of time. Covid-19 Update - In alignment with New York City's decision to lift the private employer vaccination requirements, effective November 1, 2022, Retail Employees in NYC are now exempt from submitting vaccination proof and/or no longer required of submitting proof of weekly PCR/Antigen(Rapid) testing if they have requested medical/ religious accommodation. Retail stores in NJ and Upstate continue to be exempt as per New Jersey and New York State Guidelines.

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required . Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.