Quality control inspector jobs in Clay, NY - 63 jobs

Job DescriptionDescription: With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: Competitive Pay Competitive Health Insurance Paid training and certification with cash bonuses for successful completion Advancement career and opportunity planning Company vehicle for travel to project sites Paid Vacations/Sick/Personal/Holidays Safety training and equipment provided 401(k) Retirement Savings Plan with company match Certified Welding Inspector (CWI) Qualifications: Strong written and verbal communication skills Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations. Proficient in Microsoft Office Ability to work with AWS & AISC codes One or more of the following certifications is required: ICC Structural Steel and Bolting Special Inspector, ICC Structural Welding Special Inspector, AWS CWI, AWS CAWI, SSPC, AMPP or ASNT NDT Certified Welding Inspector (CWI) Responsibilities: Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State. Perform special inspections in accordance with the applicable building code requirements. Review project plans and specifications. Review and perform welding procedure and performance qualification testing. Routinely and effectively communicate with colleagues, contractors, and clients. ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Requirements:

Description: Primary responsibility is the daily execution of all Quality Assurance processes. This includes all product testing, field testing, and data tracking. This team member must have a drive for continuous improvement in all processes, critical thinking skills, and the desire to lead by example. Responsibilities: Perform daily laboratory analyses capturing data points necessary to track the health of fermentation. Daily analyses include, but not limited to: Daily Brix, pH, Titratable Acidity, temperature, Free Sulfur Analysis, and Dissolved Oxygen Content Assist/lead with data collection, data entry, and reporting of compiled data Perform laboratory analyses to effectively monitor fermentation health Be responsible for the cleaning and calibration of all laboratory equipment/machines Ensure that all team members uphold Blake's Quality Standards Perform routine checks on packaging line throughout the day to ensure equipment and product is being held up to industry standards Perform Incoming ingredient and material inspections for compliance with food safety programs Willing to assist in any other tasks or duties as requested by the manager Education, Skills & Knowledge: High school diploma or general education degree (GED) required Preference of 1-2 years of experience working in a lab Well-developed tasting skills Understanding of Food and Beverage Industry Computer proficient in Excel and Word Good organizational, planning, and presentation skills Clear commitment to high quality and attention to details Able to work independently with minimum supervision. Must have the ability to be on your feet for an entire shift. Strong attention to detail Knowledge of GFCO and GMPs preferred On-site training available and Course training available periodically Working Conditions: The work for this position will be in a climate-controlled, smoke-free environment. The noise level in the work environment is usually moderate with some periods being loud. Work will be performed as per the schedule you create for the team. Some weekend work required as needed. Must be able to work safely in both hot and cold environments Requirements: Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor.

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.08 - $33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Join Our Team at The Fountainhead Group - Now Hiring Quality Inspectors for All Shifts! Are you detail-oriented and passionate about quality? The Fountainhead Group is seeking dedicated Quality Inspectors to join our growing team on both 1st and 2nd shifts. As part of our Quality Department, you'll play a key role in ensuring the products we proudly manufacture meet the highest standards. In this hands-on role, you'll perform first-piece, incoming, in-process, and final inspections to ensure quality at every stage of production. You'll also help evaluate and document customer returns-all while keeping accurate records that support both company and customer requirements. Be part of a team that values precision, collaboration, and pride in workmanship! Available Shifts & Pay: 1st Shift: 7:00 AM - 3:30 PM, Monday-Friday | $19.00/hour 2nd Shift: 3:00 PM - 11:30 PM, Monday-Friday | $19.00/hour + $0.50 shift differential 3rd Shift: 11:00 PM - 7:30 AM, Monday - Friday | $19.00/hour + $0.50 shift differential Want to learn about our open positions at the Fountainhead Group...Click here to learn more! **************************** Responsibilities Conduct First Article Inspection on new products and/or revised products. Inspection throughout the entire manufacturing process including inspection of raw materials, parts, sub-assemblies and finished goods. Ensure appropriate action is taken when non-conforming material is found. Make production run or hold recommendations based on the critically of the defect. Ensure operators are processing or assembling material according to Work Orders and/or BOM. Communicate discrepancies to the attention of the Supervisor, Assistant Q.C. Manager and Q.C. Manager Document performed inspections including non-conforming product found during the inspection process. Create DMR's in Epicor for all non-conforming product. Operate basic measuring devices like micrometers, calipers, height gages, etc. Follow Q.C. procedures, plans and test procedures as outlined Examine, disposition and document customer returns. Maintain good housekeeping and safety in all of the quality control work areas Prompt completion of tasks assigned by Quality Management. All other tasks so assigned. Remote Position No Min Compensation USD $19.00/Hr. Max Compensation USD $19.00/Hr. Qualifications Who You Are: High school diploma or equivalent education required Prior experience in Quality Control and/or Manufacturing preferred You are detail-oriented, capable of reviewing and documenting a high volume of product evaluations You are a skilled written and verbal communicator You possess excellent time management skills and can prioritize various tasks as assigned by the Quality Control Manager to ensure their completion in a timely manner You are capable of operating basic measuring devices (such as micrometers, calipers, height gauges, etc.) You are a team player who likes to work collaboratively In addition to a competitive salary, we are pleased to offer the following benefit package: Medical Dental Paid Vacation Holiday Pay 401k with employer match Tuition Reimbursement Health Reimbursement Account (HRA) Flexible Spending Account (FSA) Employer paid Life Insurance Employee paid Voluntary Life and Short Term Disability Coverage Company Website ************************************* Want to learn more about The Fountainhead Group? Check us out! "We Are The Fountainhead Group" ******************************************* Company Profile The Fountainhead Group is a family-owned and operated company, dedicated to the success and longevity of our business, our employees, and our community. For more than 130 years, FGI has been creating, innovating, and manufacturing liquid sprayer products for the world's top brands and retailers. From the first compressed air sprayer in 1888, we have dedicated ourselves to creating products that make our customer's lives easier, expanding our offering to include the highest quality sprayer technology for both home and professional use. Across four manufacturing and distribution centers in Central New York, we're committed to the betterment of our FGI Family of employees and our local community, supporting more than 350+ local nonprofits through our robust philanthropy and volunteer programs to ensure the success of our community for generations to come. To learn more about our company culture and commitment to the local community, visit the “Community” page of our website and be sure to follow our Facebook account for exciting updates and events! ************************************** ************************************* The Fountainhead Group is an Equal Opportunity Employer (AAE/EEO) and ranked one of the Best Companies to Work for in New York State by the Society for Human Resource Management. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, refugee or disability status. With over 12 languages spoken at FGI, regardless of language ability, education, or training, there is a place for you within the FGI Family!

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Inspect and document that welds have been produced and implemented as required by all contract documents. Perform work with an outstanding attention to detail; read and understand construction plans, accurately document and report collected information, and communicate effectively with clients. This is a regular full-time position in the Syracuse, NY area. Responsibilities Perform internal and external inspections to determine if weldments and bolts meet the acceptance criteria of a specific code, standard or document Interpret regulations, codes and industry standards to apply to daily tests and inspections Compile and submit inspection reports, daily Perform other construction materials testing and inspection, when necessary Qualifications Must possess Certified Welding Inspector Certification through the American Welding Society (AWS CWI) Knowledge of industry standards including AWS and ASTM required Working knowledge of NDT methodologies, a plus Possess good interpersonal and communication skills Attention to detail and problem-solving skills Must possess and maintain a valid driver's license Compensation: $25 - 34/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job Description Extrusion Quality Auditor Hours: 3rd Shift: Sunday - Thursday 11:00pm - 7:00am Pay: $17.00 to $20.00 an hour depending on experience Requirements High School Diploma or GED Responsible for evaluating, documenting, and dispositioning the conformity of materials and products being manufactured Ability to follow and execute detailed processes/directions Must work effectively in a team environment in a culturally diverse workplace Previous warehouse/manufacturing experience preferred Steel toe boots/shoes required Benefits Temp to Hire Position Weekly Pay Benefits once hired on Responsibilities Audit materials and products being manufactured Excellent communication to communicate conformity status with details Maintaining records Ability to use measuring equipment for auditing Maintain standards in a fast-paced and dynamic environment Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations Performs all other duties as assigned What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration!

Job Description Job Title: Quality Inspector Company Overview: At AVStar, we pride ourselves on delivering superior products in the general aviation sector. We are committed to fostering a fast-paced, collaborative environment where your contributions truly matter. Join our dedicated team and play a crucial role in our mission to achieve customer satisfaction and company success. Position Summary: We are seeking experienced Quality Inspectors to join our team. This role offers hands-on challenges and opportunities for growth as you work with a diverse array of parts in a supportive environment. If you are passionate about manufacturing processes and want to be part of a brilliant, cohesive team, we want to hear from you! AVStar NY is currently seeking an experienced 1st shift Quality Control Inspector for our Auburn, NY location. For more information about AVStar, please view our video at ********************* Position Summary: Perform inspection operations while working from drawings, customer specifications and process operating documents on moderately complex machined parts Key Responsibilities Include: Inspects finished precision machined products, including in process, incoming materials, parts, and assemblies, etc., for conformance to company standards Inspects randomly selected samples to verify accuracy Familiar with precision measuring instruments and devices Perform first piece, first article and final inspection Offers suggestions to improve/enhance the inspection process Capable of interpreting blueprints Understanding of geometric tolerance Coordinates with personnel for resolutions to quality issues Required Qualifications: High School Diploma Work Experience: 2 years' experience measuring precision machined parts CMM Experience, preferably Zeiss Key Competencies Include: Ability to perform assigned tasks independently with limited supervision Ability to read and understand component and assembly drawings Ability to perform repetitive tasks accurately Must be a detail-oriented individual Ability to use simple measurement tools such as calipers or gauges Ability to work both independently and as part of a team Demonstrates ability to work in a dynamic, fast-paced work environment Ability to accurately perform basic computer tasks Requires understanding of related inter-department processes Must work with a limited number of outside departments Ability to collect data and update measurements Pay Range: $23.00 - $26.00 depending on experience AVStar offers a comprehensive and competitive compensation and benefits package, including: Health insurance with substantial Company Contribution. Simple IRA Retirement Plan with Employer Match Dental, and Vision Insurance as offered Life Insurance for each employee Nine Paid Holidays Vacation Pay Equal Opportunity Employer: Disability/Veteran Job Posted by ApplicantPro

Job Description As a valued member of our team, you will conduct first piece, incoming, in-process and finished goods inspections as directed by the Q.C. Manager or Supervisor. You'll maintain the necessary records to meet both company and customer documentation requirements. Additionally, you'll evaluate and document Customer Returns, ensuring our high standards of quality are consistently met. Tasks and Responsibilities: Conduct First Article Inspection on new products and/or revised products. Inspection throughout the entire manufacturing process including inspection of raw materials, parts, sub-assemblies and finished goods. Ensure appropriate action is taken when non-conforming material is found. Make production run or hold recommendations based on the critically of the defect. Ensure operators are processing or assembling material according to Work Orders and/or BOM. Communicate discrepancies to the attention of the Supervisor, Assistant Q.C. Manager and Q.C. Manager Document performed inspections including non-conforming product found during the inspection process. Create DMR's in Epicor for all non-conforming product. Operate basic measuring devices like micrometers, calipers, height gages, etc. Follow Q.C. procedures, plans and test procedures as outlined Examine, disposition and document customer returns. Maintain good housekeeping and safety in all of the quality control work areas Prompt completion of tasks assigned by Quality Management. All other tasks so assigned. Who You Are: High school diploma or equivalent education required Prior experience in Quality Control and/or Manufacturing preferred You are detail-oriented, capable of reviewing and documenting a high volume of product evaluations You are a skilled written and verbal communicator You possess excellent time management skills and can prioritize various tasks as assigned by the Quality Control Manager to ensure their completion in a timely manner You are capable of operating basic measuring devices (such as micrometers, calipers, height gauges, etc.) You are a team player who likes to work collaboratively Second and third shift employee must be able to train on first shift The Fountainhead Group, Inc. is a family-owned and operated company, dedicated to the success and longevity of our business, our employees, and our community. For more than 130 years, FGI has been creating, innovating, and manufacturing liquid sprayer products for the world's top brands and retailers, driven by the hard work of our FGI Family of employees. Across four manufacturing and distribution centers in CNY, our commitment to the betterment of our employees and our community is demonstrated in our robust philanthropy and volunteer programs, supporting more than 350+ local nonprofits and ensuring the success of the community for generations of the FGI Family to come. The Fountainhead Group Inc. is an AAE/EEO employer. In addition to a competitive salary, we are pleased to offer the following benefit package: Medical Dental Paid Vacation Holiday Pay 401k with employer match up to 2% Tuition Reimbursement Health Reimbursement Account (HRA) Flexible Spending Account (FSA) Employer paid Life Insurance Employee paid Voluntary Life and Short Term Disability Coverage Company Website ************************************* To learn more about our company culture and commitment to the local community, visit the “Community” page of our website and be sure to follow our Facebook account for exciting updates and events! ************************************** *************************************

Armstrong has an opening for a Quality Inspector 2 on first shift. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, vision, medical, accident, cancer and critical care insurance and safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is ******************* and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our Inspector 2 job is $18.00-$21.00 per hour. Refer to the below: Summary/Objective: Responsible for performing visual and gauge inspection of plastic parts. Job Responsibilities Performs first piece, in process and final inspection to blueprint specifications Verifies parts are compliant with process sheet specifications Visually inspects parts for cosmetic imperfections such as flash, voids, texture, gloss level, etc. and makes minor corrections as necessary Verifies correct number, placement and proper depth of inserts Regardless of location(s) of quality inspection tasks, quality checks and recheck on rework are conducted, documented, and communicated to supervisor and direct manager. If an item/good continually fails quality checks, all documented reflects this communication to supervisor and direct manager is essential as decisions, meetings, and communication from an MRB standpoint occur. Documents actions by completing all required paperwork and quality logs. Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping. Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct. Proactively supports the ISO process approach to quality management and the Syteline MIS system. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested). Performs other tasks as directed. Educational, Experience Based, and Skill Qualifications High school diploma or equivalent with good math skills and ability to read blueprints. 6 months experience in a quality inspection capacity preferred. Foundry, machining company, or injection molding background preferred. Strong attention to detail. Basic math, & Geometry/Trigonometry Flexibility based on plant product schedules A minimum of 6 months previous experience using a computer and measuring instruments preferred Testing on inspection and measurement is a prerequisite for this position. CMM machine experience is a plus. Strong attention to detail. Conceptual Skills and good hand eye coordination to inspect parts. Physical Requirements Ability to walk, remain on feet for extended time periods, reach, stoop. Kneel and lift up to and including 35 pounds as needed. Visual abilities and manual dexterity. Requires close, distance, color, and peripheral vision, depth perception and the ability to continually adjust focus. AAP/EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at ************ or by email to ******************. * unless an employee reasonable accommodation would result in undue hardship. Management reserves the right to revise (s) at any time. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of this job. Duties, responsibilities and activities may change at any time with or without notice.

Are you ready to join a company that values tradition, innovation, and excellence? At Midstate Spring, we are proud to be the last great American Springmaker, crafting precision springs since 1939. Our fully climate-controlled facility in Syracuse offers a comfortable work environment year-round. We provide comprehensive training, abundant career growth opportunities, and a collaborative team atmosphere. If you are passionate about quality, attention to detail, and making a tangible impact, Midstate Spring is the perfect place for you. Job Summary: The Quality Inspector plays a key role in supporting the Quality Manager and ensuring adherence to Midstate Spring's Quality Management System. This position is primarily responsible for conducting visual and dimensional inspections, monitoring quality throughout the production process, and accurately documenting inspection results. The Inspector helps identify and communicate process trends, supports lot control and traceability, and ensures that products meet internal and customer specifications. This role contributes to defect prevention, operational consistency, and overall product quality, while offering hands-on experience in precision spring manufacturing and the opportunity to directly support customer satisfaction and compliance. Duties/Responsibilities: Gather, record, and plot Statistical Process Control (SPC) data to monitor production quality trends. Document, track, and support the resolution of internal and external quality issues. Conduct root cause investigations and assist in implementing corrective and preventive actions. Conduct 100% inspection, sorting, and packaging of parts as required to meet customer quality standards. Create and maintain ISO documentation and support audit processes. Perform part inspections as assigned to verify conformance to specifications. Complete compliance requests from customers. Maintain general housekeeping standards within the quality work area and assist in other duties as assigned. Required Skills/Abilities: Basic computer skills required, including Microsoft Office, email composition and other communication/collaborative tools. Must be able to type at least 45 words per minute. Education and Experience: Associate's degree in a technical field or equivalent; relevant work experience may be considered in lieu of a formal degree. 1-3 years of manufacturing experience in an industrial environment. Benefits: Benefits include health, dental & life insurance, available the first of the month following date of hire. 401K (with match) is available January 1st or July 1st after 6 months of service. Paid Time Off (PTO) is awarded upon hire and on a quarterly basis. We offer opportunities for professional development and advancement, a dynamic and supportive work environment with the chance to be part of a growing company committed to quality and sustainability. Physical Requirements: Lifting: 50 lbs. Carrying: 50 lbs. Pushing: 50 lbs. Pulling: 50 lbs. Standing: 40% Walking: 5% Sitting: 55% If you enjoy hands-on work, possess a keen eye for detail, and are eager to learn, Midstate Spring could be the perfect place for you. Apply today to join our dedicated team and contribute to our mission of excellence in spring manufacturing. EOE Statement: Midstate Spring, Inc. is dedicated to being an equal opportunity employer. We recruit, employ, train, compensate, and promote employees without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state, or local laws. At Midstate Spring, we believe in equal opportunity for all. We are committed to ensuring that every individual, including those with disabilities, has the opportunity to apply for positions they are interested in and qualify for, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. We are also committed to providing reasonable accommodations to qualified individuals so they can perform their job-related duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation due to a disability, please contact Amy Clifford at ************. If you enjoy hands-on work, possess a keen eye for detail, and are eager to learn, Midstate Spring could be the perfect place for you. Apply today to join our dedicated team and contribute to our mission of excellence in spring manufacturing.

Direct Hire Beyond TalentEdge has partnered with a global leader in the design and manufacture of engineered solutions in search of a Quality Control Inspector to join their team. This role is Direct hire; we invite you to apply today! Responsibilities: Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as profilometer, optical comparator, height gauge, microscope, smart scope and CMM. Perform incoming and receiving inspection to specified requirements. Perform inspection of finished details and assemblies to specified requirements. Performs Statistical Process Control (SPC) analysis. Enter inspection results into a variety of data collection tools and databases. Inspection of welded and brazed assemblies. Candidate requires internal certification of weld inspection. Keep accurate records and maintain quality documentation. Perform inventory movement transactions in the ERP system and ensure traceability of product. Understand the non-conforming material process to ensure control of material. Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner. Write clear material rejection reports that contain problem statements, dimensions, and data. Retrieve test data from databases and assemble documentation packages to ship with the product. Proficient in multiple customer websites and requirements in order to assemble documents and perform DSQR (customer delegated source inspection). Use Syteline (ERP System) in order to retrieve quality requirements and perform tasks related to moving product in system. Understand the return material process in order to assemble parts and documentation for eventual shipment back to the customer. Perform tasks as assigned by the Inspection department Supervisor or Quality Manager Requirement Qualifications: Minimum education is High School Diploma Associates or higher in Technical Discipline/Trade preferred Minimum 3 years in a precision manufacturing or machining environment Basic Statistical Process Control and Statistical Fundamentals Minimum 3 years in a precision manufacturing or machining environment Experience with computer software like; Statistical Software, Access, advanced Excel Experience in writing programs in Calypso Salary & Schedule: $20-25 an hour or more depending on experience Schedule: Monday- Friday 8am- 5:00pm Benefits: PTO, Holiday, 401k “Beyond TalentEdge is an Equal Opportunity Employer. It is the policy of Beyond TalentEdge to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition,predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.”

Job Title: QC TechnicianJob Description We are seeking a dedicated QC Technician to conduct quality control tests on materials, ensuring compliance with industry standards. You will be responsible for collecting, analyzing, and documenting test results to support production quality. Collaborating closely with production teams, you will identify and address quality concerns, maintain laboratory equipment, and ensure calibration for accurate testing. Adherence to safety and environmental regulations is essential. Responsibilities * Conduct quality control tests on materials to ensure compliance with industry standards. * Collect, analyze, and document test results to support production quality. * Work closely with production teams to identify and address quality concerns. * Maintain laboratory equipment and ensure calibration for accurate testing. * Follow all safety and environmental regulations in testing procedures. Essential Skills * Strong understanding of quality control testing methods and industry standards. * Attention to detail with the ability to analyze and document findings accurately. * Ability to collaborate effectively with cross-functional teams. * Commitment to safety protocols and adherence to regulatory guidelines. Additional Skills & Qualifications * Willingness to learn and adapt to new technologies and processes. * Experience in quality control, laboratory work, inspection, quality assurance, document control, and materials handling is beneficial. * High School Diploma required. * Previous QC or lab experience is a plus. Work Environment This position involves working 50% of the time in a laboratory setting and 50% in the field. The work environment requires a balance between lab and fieldwork, ensuring a dynamic and engaging experience. Job Type & Location This is a Permanent position based out of Auburn, NY. Pay and Benefits The pay range for this position is $47840.00 - $52000.00/yr. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled Workplace Type This is a fully onsite position in Auburn,NY. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Line of Business: Other About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform sampling and testing of materials to ensure product quality and compliance Record, analyze, and report test results with accuracy and attention to detail Support production teams by communicating quality findings and recommending adjustments Maintain laboratory equipment and follow all quality control procedures Contribute to a strong safety culture by following all site and lab safety protocols What Are We Looking For Ability to perform accurate testing and follow established quality procedures Strong attention to detail and commitment to producing reliable results Capability to learn and apply technical standards, specifications, and testing methods Effective communication skills and the ability to work collaboratively with operations teams Reliability, problem‑solving skills, and readiness to adapt in a dynamic environment Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Some positions require FMCSA regulated ongoing drug and alcohol testing Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $23.00 to $25.00 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 56 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

FOR INTERNAL USE ONLY Final Inspector 1 Grade: H30 EEOC Classification: Operatives FLSA Status: Non-Exempt About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: The employee performs inspection of components, sub-assemblies, and fully assembled products. The employee would be responsible for gauging, measuring, and visually inspecting product, including all associated paperwork, making sure that it complies with our print specifications. Key Responsibilities : Understanding and inspecting a wide variety of interrelated dimensions and surface finishes. Responsible for inspection of in-process and processed parts. Performs special inspection set-ups either on machines or at benches. Use and understand all applicable instruments and gages such as height gauge, thread gauges, micrometers, calipers, ring gauges, depth gauges, and comparator. Required to read and understand complex blueprints, procedures, travelers, and comp cards. Utilize Excel files and Team Improvement Boards to collect and display FTY information. Work closely with Group Leaders and Team Leaders on problem solving activities. Utilize main frame system for scan/verify operations. Work with Planner and Team Leader on daily shipments. Work closely with both the teams Quality and Manufacturing Engineers when quality issues arise, ability to understand internal MDR/MRB and external case record requirements. Meet all requirements of VCT Inspection (S19)-Knowledge of proper use of stamps, router systems, move/stock systems, “hold” and “Variations” systems, and material release systems. Meet all requirements of Specific Hand Deburr (A07)-Demonstrate use of hand tools to a specific operation. Explain paperwork responsibility. Interpret process and allowable practices. Demonstrate ability to work under microscope. Knowledge of routine maintenance of tools. Ability to use both dot peen and laser marking systems, along with associated verification devices. May be expected to train others in the role of Final Inspection in value streams for which he/she are certified. Pass internal certification requirements in order to judge hardware cosmetics as directed by our customer assessed by the Quality Leader. Required Qualifications: Possess a High School Diploma or Equivalent preferred Knowledge of welding terms and symbols, sectioning and polishing techniques, and use of lab microscopes. Basic understanding of Microsoft Office suite Preferred Qualifications: Experience in manufacturing environment minimum of 2 years Background in inspection including hard gaging, use of calipers, micrometers, and visual inspection minimum of 1 year Experience with the deburring of metal hardware Experience with weld and/or inspection of weld or braze Key Competencies Include: Demonstrates accurate record keeping ability. Possess knowledge of machining and welding procedures. Advanced knowledge and use of standard and special gaging and comparators. Strong communication skills. Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the team member is required to walk, stand, stoop, bend, crawl, climb and sit for extended periods of time. The team member is required to demonstrate manual dexterity and use hands to operate machinery. Specific vision abilities required by this job include close vision. Also expected of the team member is regular attendance and the ability to work cooperatively and professionally with others. May be required to lift up to 50 lbs.

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants Read construction documents and specifications and correctly interpret test results Record and report test results in a clear, concise manner Complete each testing assignment accurately and in accordance with the appropriate standards Turn in field data records and completed reports for each project daily Communicate regularly with direct supervisor to provide updates on project details Complete continuing education and preparation for additional certifications Qualifications High School Diploma required Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Familiarity with construction materials, procedures and documents a plus Must possess and maintain a valid driver's license Must possess reliable transportation and current/required automotive insurance coverage Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job Title: Quality Inspector Company Overview: At AVStar, we pride ourselves on delivering superior products in the general aviation sector. We are committed to fostering a fast-paced, collaborative environment where your contributions truly matter. Join our dedicated team and play a crucial role in our mission to achieve customer satisfaction and company success. Position Summary: We are seeking experienced Quality Inspectors to join our team. This role offers hands-on challenges and opportunities for growth as you work with a diverse array of parts in a supportive environment. If you are passionate about manufacturing processes and want to be part of a brilliant, cohesive team, we want to hear from you! AVStar NY is currently seeking an experienced 1st shift Quality Control Inspector for our Auburn, NY location. For more information about AVStar, please view our video at ********************* Position Summary: Perform inspection operations while working from drawings, customer specifications and process operating documents on moderately complex machined parts Key Responsibilities Include: Inspects finished precision machined products, including in process, incoming materials, parts, and assemblies, etc., for conformance to company standards Inspects randomly selected samples to verify accuracy Familiar with precision measuring instruments and devices Perform first piece, first article and final inspection Offers suggestions to improve/enhance the inspection process Capable of interpreting blueprints Understanding of geometric tolerance Coordinates with personnel for resolutions to quality issues Required Qualifications: High School Diploma Work Experience: 2 years' experience measuring precision machined parts CMM Experience, preferably Zeiss Key Competencies Include: Ability to perform assigned tasks independently with limited supervision Ability to read and understand component and assembly drawings Ability to perform repetitive tasks accurately Must be a detail-oriented individual Ability to use simple measurement tools such as calipers or gauges Ability to work both independently and as part of a team Demonstrates ability to work in a dynamic, fast-paced work environment Ability to accurately perform basic computer tasks Requires understanding of related inter-department processes Must work with a limited number of outside departments Ability to collect data and update measurements Pay Range: $23.00 - $26.00 depending on experience AVStar offers a comprehensive and competitive compensation and benefits package, including: Health insurance with substantial Company Contribution. Simple IRA Retirement Plan with Employer Match Dental, and Vision Insurance as offered Life Insurance for each employee Nine Paid Holidays Vacation Pay Equal Opportunity Employer: Disability/Veteran

Job Description3rd Shift Quality Control InspectorHours: 11PM..-7:30AM. Monday-Friday Quality Control Inspector will be responsible for first piece, incoming, in process and finished goods inspections as directed by the Assistant Q.C. Manager. Will maintain the appropriate records to comply with the company and customer documentation requirements., and will be responsible for the evaluation and documentation of all Customer Returns. Qualifications: High School diploma / GED Minimum of 3 years' experience as a quality control inspector or a minimum of 3 years in manufacturing.Experience using measuring devices Blue print reading experience Requirements:Must be able to read and write English Must be able to work overtime Must have good attendance Must be able to perform mathematical equations What's in it for you?Staffworks associates are eligible for the following: Accrued Paid Sick Leave Referral Bonus Incentives Become eligible for Health Insurance* and More!!

Job DescriptionDescription: With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: Competitive Pay Competitive Health Insurance Paid training and certification with cash bonuses for successful completion Advancement career and opportunity planning Company vehicle for travel to project sites Paid Vacations/Sick/Personal/Holidays Safety training and equipment provided 401(k) Retirement Savings Plan with company match Certified Welding Inspector (CWI) Qualifications: Strong written and verbal communication skills Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations. Proficient in Microsoft Office Ability to work with AWS & AISC codes One or more of the following certifications is required: ICC Structural Steel and Bolting Special Inspector, ICC Structural Welding Special Inspector, AWS CWI, AWS CAWI, SSPC, AMPP or ASNT NDT Certified Welding Inspector (CWI) Responsibilities: Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State. Perform special inspections in accordance with the applicable building code requirements. Review project plans and specifications. Review and perform welding procedure and performance qualification testing. Routinely and effectively communicate with colleagues, contractors, and clients. ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Requirements:

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform routine testing of ready mix concrete to ensure compliance with specifications and standards Maintain accurate records of test results and communicate findings to production and quality teams Assist in troubleshooting product quality issues and recommend corrective actions Calibrate and maintain testing equipment to ensure reliability and accuracy Support continuous improvement initiatives in product quality and operational efficiency What Are We Looking For Strong understanding of concrete materials and testing procedures Ability to work independently and manage multiple tasks effectively Detail-oriented with strong analytical and problem-solving skills Clear and professional communication skills Commitment to safety and quality standards Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Must meet all legal requirements to work in the U.S. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $23 - $27 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 56 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled