Quality control inspector jobs in Cranston, RI

Location: Rochester MA (100% On-site), 1st shift only 6:30A-3:30P M-F, salary range $72K-$82K, full-time role: health insurance with an HRA, dental, vision, LTD, and a 401(k) retirement plan with an employer match. 3 weeks PTO, 1 week sick. Generous relocation package offered. Qualified candidates are encouraged to apply. Large precast concrete supplier in Massachusetts and New Hampshire, providing high-quality products for over 70 years. Their extensive product range includes septic tanks, manholes, drainage structures, bulkheads, curbing, residential steps, and retaining wall systems, all crafted to precise specifications. They cater to engineers, contractors, and homeowners, emphasizing superior performance and exceptional customer service. The Quality Control Technician (“QC Technician”) will work within the production plant and is ultimately responsible for product testing. The QC Tech will assist in the execution of quality control processes, procedures and protocol associated with the production of pre and post concrete pours. Responsibility Responsible for ACI concrete field tests Responsible for quality control inspections in manufacturing plant Inspect forms before pouring (Pre-Pour). Inspect product after removed from forms (Post-Pour) Notifies Production Supervisor if deficiencies are found. Perform and/or schedule repairs on products as needed. Housekeeping - maintain a clean work area. Including cleanliness within breakroom, restroom, and general facility areas. Expected to maintain knowledge of precast plant techniques and procedures. May assist with precast production operation as needed. Characteristics Always committed to safety. Maintain a safe work area. Follow safe work practices as outlined in the Safety Program. Always committed to quality. Follow and implement quality control measures. Excellent attendance. Reliable means of transportation to and from work. Ability to learn, organize and prioritize work and handle multiple tasks. Outstanding attitude, honesty, and ethic at all times. Expected to use sound judgment, diplomacy, and discretion. Work independently or cooperatively with others. Self-drive in carrying out the functions of the job. Requirements: ACI Concrete Field-Testing Grade 1 Certified (preferred) NPCA PQS Training Must be at least 18 years of age per federal guidelines. Good communication skills, both verbal and written to all levels of staff Ability to remain focused in busy environment. Computers and tablets skills in order to perform tasks. Ability to read blueprints and sketches.

Contract Length: 6 month with potential extension About the Role We are seeking a highly motivated and independent QC Equipment Technician to be the operational and compliance expert for all laboratory equipment within our state-of-the-art biopharmaceutical Quality Control (QC) facilities. This specialized role is critical for ensuring the continuous qualification, calibration, and maintenance of high-precision analytical instrumentation, directly supporting the compliance and integrity of our clinical and commercial testing programs. Key Responsibilities The QC Equipment Technician manages the full lifecycle of laboratory assets and supports the robust quality system that governs their use: Equipment Lifecycle & Maintenance Coordinate and schedule calibration, maintenance, and Installation, Operational, Performance Qualification (IOPQ) activities with Facilities, Metrology, and QC end-users to minimize equipment downtime and address Out of Tolerance (OOT) events immediately. Monitor, coordinate, and communicate equipment lifecycle timelines-from acquisition and induction to qualification, implementation, and decommissioning-utilizing project management tools. Submit asset induction, work, and administrative requests to ensure equipment failures are addressed immediately and data in the Computerized Maintenance Management System (CMMS) is accurate and in the proper state. Serve as the primary QC point person for all equipment inquiries, acting as the liaison between the laboratory team and appropriate external vendors. Ensure all vendor representatives strictly follow site safety and cGMP procedures when working on equipment. Perform minor, non-invasive repairs on high-precision systems like UHPLC (e.g., changing capillaries, flow cells, needles/seats) and execute basic troubleshooting to diagnose complex failures. Quality & Compliance Documentation Support the authoring, review, and maintenance of high-stakes quality system records, including Deviations, Change Controls, and CAPAs (Corrective and Preventive Actions) as required. Author, revise, and maintain Equipment/Instrument Standard Operating Procedures (SOPs). Review preventative maintenance reports, calibration certifications, CMMS records, and perform system inventory audits to ensure compliance. Ensure all equipment documentation meets stringent cGMP, GDP (Good Documentation Practices), and data integrity requirements (ALCOA+) throughout its operational life. Ensure all tasks are performed in compliance with safety and cGMP requirements. Inventory & Logistics Order supplies and maintain inventory for equipment consumables and accessories. Assist with locating and collecting assets due for service and returning them to the laboratory promptly once service is complete. Basic Qualifications Education: Bachelor's degree (BS) in a relevant scientific discipline (e.g., Chemistry, Biology, Engineering, or related field). Experience: Minimum of 5 years of experience in a regulated laboratory setting with a BS degree. OR Minimum of 3+ years of experience in a GMP Quality Control (QC) laboratory setting. Knowledge: Demonstrated aptitude and ability to learn quickly to develop a strong understanding of GxP principles (cGMP, GLP). Skills: Proven expertise in laboratory equipment IOPQ, calibration, maintenance, and troubleshooting. Familiarity with electronic Quality Management Systems (eQMS) and CMMS software.

Job Description About Us Stellar Industries is a rapidly growing industry leader in manufacturing metalized ceramics. We are a major supplier of innovative, high-quality parts to the Aerospace, Photonics, Telecommunications, and Commercial industries. The company was acquired by TRUMPF Photonics in 2019 and has significant growth goals. About the Role The Quality Control Inspector Level II maintains quality standards by inspecting incoming materials from outside suppliers, in-process production, and finished products in accordance with the quality standards and operating procedures set forth by the Head of Quality Control/Quality Assurance. What You Get to Do Works independently with minimal supervision. Maintain an organized and clean work area. Uses Hand tools, including but not limited to tweezers, calipers, and micrometers. Confirms specifications by conducting visual and measurement tests. Works with a variety of blueprints and technical drawings; must be able to interpret changing requirements as products and builds vary. Completes a General Inspection Report by documenting inspection findings regarding product dimensions, quantity of parts accepted/rejected, and basis of rejection. Uses Vision Systems and documents results into the computer. Follow all safety protocols. Cross-train as requested in other areas of the company. About You Minimum of 3 years of quality control experience. Must be able to work in a sitting position for up to 10 hours. Must be able to wear a lab coat, spittle mask, and gloves while working. The position requires working with measuring devices and microscopes. Individuals must have previous experience working in a similar environment. Must be able to work independently and demonstrate extremely high levels of precision and accuracy. line, High-Temperature BTU Furnaces, as well as various facility-related items, including air handlers, air compressors, air filtration units, etc. What We Offer Competitive pay A generous benefits package that includes medical, dental, 401K plan, and PTO Employer-paid vision plan, Employer paid Basic Life and AD&D Insurance, and Employer Paid Disability Insurance Tuition Reimbursement 4-Day workweek, Monday-Thursday 12 pm-10:30 pm Monday-Thursday 12:00 pm - 10:30 pm

So why join Hologic? You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. The Quality Control Inspector is a critical member of the Quality Assurance team, responsible for ensuring that finished products and in-process components meet all regulatory, quality, and customer requirements before release to inventory. This role involves the meticulous review of Device History Records (DHRs), performing inspections, and providing support to manufacturing and quality processes, such as Incoming Inspection, Material Review Board (MRB), Calibration and Returned Material Authorization (RMA) activities. The Final Inspector 2 is instrumental in upholding Hologic's commitment to excellence by ensuring compliance with Good Manufacturing Practices (GMP), ISO standards, and quality systems, while fostering a culture of continuous improvement and collaboration. What to expect: Lead with Ownership - Demonstrate integrity and always aim to do the right thing. Be highly accountable for your work, follow through on commitments, and take responsibility when things don't go as planned. Embrace opportunities to try new things and learn from mistakes. Act with Speed - Approach tasks with a strong sense of urgency and a bias toward action. Keep stakeholders informed by providing regular updates early and often, ensuring transparency and avoiding unexpected surprises, even when working at a fast pace. Foster Partnerships - Collaborate effectively with teammates and stakeholders to achieve shared goals. Invest in building strong working relationships and contribute to efforts that fulfill the organization's Purpose, Promise, and Passion. Delight Customers - Strive to exceed expectations by delivering high-quality work, exceptional experiences, and innovative solutions. Engage in proactive communication, provide excellent service, and develop a deep understanding of customer needs to create positive, lasting impressions and build trust-based relationships. Celebrate WINS! - Take pride in delivering impactful results. Contribute to a positive team environment by celebrating both individual and team accomplishments. Support colleagues, recognize collective successes, and embody the mindset of an 'A-player' who inspires others. What we expect: Perform detailed reviews of Device History Records (DHRs) as part of final inspection and release activities for finished products, ensuring accuracy and compliance with documentation standards. Conduct reviews of manufacturing records for replacement components, subassemblies, and in-process inspections to ensure alignment with quality requirements. Support manufacturing personnel by ensuring proper documentation of Failure Investigation Reports and processing of Non-Conforming Materials in the Product Lifecycle Management (PLM) system, including identification, quarantine, and documentation. Perform routine inspections, including field service and special inspections, to support validations, studies, and incoming inspection activities. Communicate and reinforce Good Manufacturing Practices (GMP) to manufacturing personnel to uphold quality standards. Review and provide input on new releases of Inspection and Test documents to ensure adherence to Good Documentation Practices (GDP). Maintain QA Activity Collection Plans, First Pass Yield reports, and other applicable tracking mechanisms to monitor quality metrics. Collaborate with Engineering to provide feedback on documentation improvements and process changes. Support Incoming, product returns and calibration teams as needed as needed. Perform other duties as assigned by leadership to meet organizational and operational needs. Education and Experience: High school degree and/or an equivalent technical school education preferred. Minimum of 3 to 5 years related Quality Inspection experience in Medical Manufacturing environment. Experience with Oracle, and Agile preferred. The annualized base salary range for this hourly role is $46,100-$69,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

The Panther Group is looking to hire a Quality Inspector to support production at a leading manufacturer's Franklin, MA facility. The selected candidate will be responsible for the following duties: Self-starter able to work independently Responsible for supporting incoming, in-process, and final inspections - focus on machined and assembled mechanical components Verify product conformance to program specifications, drawings and acceptance tests Capture all inspection data and supplier data packages in ETQ and Deltek Knowledge of test and inspection methodology Able to properly utilize standard inspection tools; calipers, micrometers, height stands, etc Support of QMS, AS9100D and CMMI processes Supports assigned programs in accordance with detailed Quality Plans Assure inspection equipment used is calibrated Assist with cable & circuit board inspection as needed Required Qualifications: Minimum 3 Years experience Experience working on DOD electromechanical products Must be proficient in Microsoft Office applications Possess good technical communications and team building skills Must be able to interface with engineering, manufacturing, program office and configuration management Ability to problem solve and critically think Good trigonometry/geometry math skills Experience with Geometric Dimensioning and Tolerancing (GD&T) IAW ANSI/ASME Y14.5 Preferred Qualifications: Certified to or knowledgeable of IPC-A-610/620 requirements Recent experience working in an AS9100 environment Recent experience operating a CMM Pay Rate: Up to $35.00 per hour DOE #INDENG

Job Description Busek Co. Inc. (************** research, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. How you will make an impact: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Skills: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. The expected salary range for this position is $52,000 - $79,000. Actual compensation will be determined by the candidate's experience, education, and alignment with organizational needs. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal Powered by JazzHR 7u9ZsAqfCq

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. PAY RANGE: $32.00/hour- $42.00/hour based on experience Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

At Spindrift, we're making every beverage a positive force of nature. Founded in 2010, we believe the best flavors come directly from nature. That's why every Spindrift beverage is made the hard way-with real squeezed fruit, never from concentrate. From sourcing the best-tasting fruit globally to maintaining a carefully honed manufacturing process, we believe in doing things the hard way, the intentional way, the better albeit more challenging way, the right way - because, in the end, it's worth it. Spindrift sparkling water is available nationwide, and Spindrift Spiked and Spindrift SODA is available in select markets. We are also a proud member of 1% for the planet, donating to environmental causes. Spindrift is headquartered in Newton, MA. The Quality Technician Role The Quality Technician will be responsible for supporting the Spindrift quality program across Spindrift's beverage portfolio, assist with maintenance of the retain library, assistance with recruiting and training internal sensory panelists, assist with collecting, synthesizing and archiving data as it relates to quality initiatives. Responsibilities include: Assisting the Sensory Analyst with managing the Spindrift sensory program by supporting new panelist onboarding and training, product retain tastings onsite, raw material evaluations, and standard production retains Assisting with managing the Product Retain Library to ensure it is neatly organized at all times, including maintaining an orderly process of receiving/processing product retains into the library upon arrival and the disposal/removal of out-of-date code samples Supporting the creation and organization of quality documentation (i.e. SOPs, protocols, training documents and more as needed) Collaborating with various teams within operations on the following activities: Finished product releases as needed, including review of finished micro reports and sensory evaluations Production holds as needed, including performing sensory evaluations on finished product and communicating results to relevant parties Assist with qualification of new suppliers, including performing required sensory evaluation of raw materials to determine acceptability for use Data entry and approval for specified raw materials into quality management system Assist with consumer complaint process, to include but not limited to: data entry, sample collection, investigation support Requirements Previous food safety experience, with experience in HACCP, GMP, USDA, or FDA preferred. Previous experience with SQF, ISO, GFCO, and/or FDA audits desirable Excellent verbal and written communication skills Thrives in an entrepreneurial environment and considers no task too small nor too large Consistently demonstrates accuracy, thoroughness and dependability Establishes and maintains effective channels of communications with internal and external contacts Adjusts tasks and focus in accordance with changing deadlines and priorities Available to travel up to 10% Able to work in the Newton, MA office Benefits Hourly rate for this part-time position is $22 - $25 / hour, 24-32 hours per week.

Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. Remote Work Option: Remote work is permissible in some positions at SMOC depending on the key functions and responsibilities. The Lead Inspector position is eligible to work from home 0% of the week in scheduling coordination with the department manager. Monday-Friday; 9am-5pm 35

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries. With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. PAG supports operators in the Airline, Business and General Aviation (BGA), Military and Rotary Wing markets through its Inventory Supported Maintenance, Repair, and Overhaul (ISMRO ) business model. JOB PURPOSE We are seeking motivated candidates for this position which involves receiving, inspecting components for repair and overhaul, generating pre-established technical documentation and shop travelers. Data entry experience is a plus! but not required. JOB DUTIES AND RESPONSIBILITIES Essential Job Functions: • Receiving incoming Components for Repair / Overhaul • Generating documentation, technical data and shop travelers using customer repair orders as guidance. • Perform Visual and Dimensional Inspections using manual inspection tools to determine serviceability • Perform Floor Inspections on various machines / ensuring tolerances are met • Maintain FAA Documentation / Record keeping • Prepare Customer Repair / Overhaul Quotes • Perform Final Inspections / Generate FAA / DOT Documentation • Assist in Maintaining FAA/DOT Quality System WORKING CONDITIONS Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position may require walking primarily on a level surface for periods of time as well as reaching above shoulder heights or below the waist or lifting as required to file documents or store materials throughout the workday Equipment Operated: Ability to operate office machines and equipment and troubleshoot problems with equipment. Work Location: Aviation Welding Technologies, LLC 73 Commerce Drive, Uxbridge, MA Protective Equipment Required: None Potential Hazards: Exposure to materials identified on Material Safety Data Sheets. JOB SPECIFICATIONS Knowledge, Skills and Abilities: Must have a minimum of 5 years' experience. • Must be Highly Motivated individual • Must possess Excellent Organizational and Communication Skills • Must have Data Entry Skills / computer literate • Must be able to read, write and understand English • Must be available to work Fulltime, M-F, Hours ranging from 7am- 5pm • Must pass FAA/DOT Pre-Employment drug test and background screen, also will be subjected to random drug and alcohol testing. Education/Training: Minimum of a H. S. Diploma or GED. Experience: Minimum of 3 years' experience. Certificates/Licenses: None We offer competitive pay and a wide variety of benefits. Full time associates qualify for health benefits the first of the month following 30 days' employment. Options include 4 medical plans, 2 dental plans, vision, base life (company paid), voluntary life, short and long-term disability, flex spending accounts, and telemedicine. Other benefits include vacation and PTO time accrued with each pay cycle with a vacation carryover/payout option at year end, 9 paid holidays, 401k with company match contributions. Qualified candidates with strong drive, work ethic and commitment to quality are invited to apply at www.precisionaviationgroup.com using the Careers tab. EOE/Vets/Disabled

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Responsibilities Inspect complex machined and fabricated parts using advanced measuring and layout instruments and equipment, visual and mechanical inspection methods. Prepare required inspection documentation such as written descriptions of inspection results including deviations from engineering specifications. Must be able to pass a Dimensional Measurement and Color ID Review. Must wear steel toe shoes. Must have a reliable form of transportation and ability to travel to other company locations. Flexibility to work OT when needed including some Saturdays. Understanding of how to identify non-conforming material properly. Strong attention to detail. Qualifications Minimum of 5 years' experience working as an mechanical inspector Ability to learn and work with specialized inspection equipment (i.e.CMM, comparator, etc… Proficient working with inspection tools: microscope, magnifier. Able to work with effectively little or no direct supervision. Ability to understand and execute First Article Inspections to meet requirements. Excellent communication and writing skills. Meticulous record keeping and tremendous attention to detail Columbia Tech is an Equal Opportunity Employer. Columbia Tech does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business needed.

Are you passionate about your work and want to make a hands on difference in critical industries? EaglePicher Electronic Packaging is a leading developer and manufacturer of hermetic housings and other components for the reliable, long-term protection of mission critical electronics. WE ARE GROWING OUR SOUTHBRIDGE, MA LOCATION AND WE ARE A GREAT PLACE TO WORK! We are actively seeking a Quality inspector at our Southbridge, MA facility. Candidate will perform complex inspections of assemblies and finished product for Aviation, Defense, and Space designs. Requires inspection using a microscope and some product bench testing. Responsibilities Perform simple and complex measurements in accordance with company standards and procedures. Keep accurate records of inspections on product travelers and process logs. Perform First Article Inspections (FAI's). Guide new product through the Production Part Approval Process. Perform data entry and review Quality Inspection Plans for accuracy. Approve or reject based upon relevant standards. Perform visual inspection per customer / industry requirements. Review documentation produced by the Quality Control Inspection Team. Examine and audit records for accuracy to product specifications. Comply with all EH&S requirments for work areas, including but not limited to PPE requirements for individual work areas. Qualifications U.S. Citizen or Permanent Residency required (Green Card Holder) High School Diploma or equivalent required, college or technical coursework leading to a degree or certificate is perferred 3-5 years manufacturing inspection experience (quality control) preferred (position may be filled at higher or lower grade level based on experience) Strong written and verbal communication skills Ability to work independently and as a part of team Capable of reading blueprints Strong knowledge of optical comparators Proficiency with using caliper, micrometer, drop indicator, gauges and other standard Quality measuring devices Strong basic arithmetic skills Understanding of Geometric Dimensioning and Tolerancing Standards (GD&T.) Must have strong basic computer skills. Experience with ISO9001, AS9100 or ISO13485 Quality Management Systems The salary range for this position is $19.28 - $21.82 per hour and represents the minimum and maximum for the position. The actual range will vary based upon factors including but not limited to: prior experience, knowledge, skill and education as they relate to the position's qualifications and internal equity. The posted salary range reflects just one component of our total rewards package. Other components include: PERKS OF BEING AN EAGLEPICHER EMPLOYEE Medical, dental, vision, life, and disability insurance with coverage on day one 11 paid holidays Paid vacation (PTO) Paid sick/personal time Matching 401K with vesting on day one Tuition reimbursement Dependent scholarship programs ABOUT EAGLEPICHER EaglePicher Technologies, LLC is a leading producer of batteries and energetic devices for the defense, aerospace, medical, commercial, oil, and gas industries. The company provides the most experience and broadest capability in battery electrochemistry of any battery supplier in the United States. Battery technologies include lithium ion, thermal, silver zinc, lithium carbon monofluoride, lithium thionyl chloride, lithium manganese dioxide, lithium sulfur dioxide, and reserve lithium oxyhalide. EaglePicher also provides custom battery assemblies, battery management systems, pyrotechnic devices, and other power solutions. EaglePicher Technologies is headquartered in Joplin, MO. and is ISO9001:2008, ISO 13485, and AS9100C certified. For more information, visit ******************** EaglePicher Electronic Packaging, LLC., is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, natural origin, religion, sexual orientation, gender identity, status as a veteran and basis of disability, or any other federal, state or local protected class.

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions Responsible for individual Inspection activities Undergo training when necessary Adhere to policies and procedures related to specific customer requirements Ability to understand specific directions and follow guidelines that are common throughout the department Ability to maintain a constant focus on quality and accuracy Ability to work with minimal supervision Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens Obey all safety rules, use caution in work activities, and continuously practice safe behaviors Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred High school diploma or equivalent 1 year of Product Operator experience necessary Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities Understand Quality Management System (QMS) requirements Training on the specific equipment must be fully completed within 90 days of hire Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.

So why join Hologic? You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. The Quality Control Inspector is a critical member of the Quality Assurance team, responsible for ensuring that finished products and in-process components meet all regulatory, quality, and customer requirements before release to inventory. This role involves the meticulous review of Device History Records (DHRs), performing inspections, and providing support to manufacturing and quality processes, such as Incoming Inspection, Material Review Board (MRB), Calibration and Returned Material Authorization (RMA) activities. The Final Inspector 2 is instrumental in upholding Hologic's commitment to excellence by ensuring compliance with Good Manufacturing Practices (GMP), ISO standards, and quality systems, while fostering a culture of continuous improvement and collaboration. What to expect: * Lead with Ownership - Demonstrate integrity and always aim to do the right thing. Be highly accountable for your work, follow through on commitments, and take responsibility when things don't go as planned. Embrace opportunities to try new things and learn from mistakes. * Act with Speed - Approach tasks with a strong sense of urgency and a bias toward action. Keep stakeholders informed by providing regular updates early and often, ensuring transparency and avoiding unexpected surprises, even when working at a fast pace. * Foster Partnerships - Collaborate effectively with teammates and stakeholders to achieve shared goals. Invest in building strong working relationships and contribute to efforts that fulfill the organization's Purpose, Promise, and Passion. * Delight Customers - Strive to exceed expectations by delivering high-quality work, exceptional experiences, and innovative solutions. Engage in proactive communication, provide excellent service, and develop a deep understanding of customer needs to create positive, lasting impressions and build trust-based relationships. * Celebrate WINS! - Take pride in delivering impactful results. Contribute to a positive team environment by celebrating both individual and team accomplishments. Support colleagues, recognize collective successes, and embody the mindset of an 'A-player' who inspires others. What we expect: * Perform detailed reviews of Device History Records (DHRs) as part of final inspection and release activities for finished products, ensuring accuracy and compliance with documentation standards. * Conduct reviews of manufacturing records for replacement components, subassemblies, and in-process inspections to ensure alignment with quality requirements. * Support manufacturing personnel by ensuring proper documentation of Failure Investigation Reports and processing of Non-Conforming Materials in the Product * Lifecycle Management (PLM) system, including identification, quarantine, and documentation. * Perform routine inspections, including field service and special inspections, to support validations, studies, and incoming inspection activities. * Communicate and reinforce Good Manufacturing Practices (GMP) to manufacturing personnel to uphold quality standards. * Review and provide input on new releases of Inspection and Test documents to ensure adherence to Good Documentation Practices (GDP). * Maintain QA Activity Collection Plans, First Pass Yield reports, and other applicable tracking mechanisms to monitor quality metrics. * Collaborate with Engineering to provide feedback on documentation improvements and process changes. * Support Incoming, product returns and calibration teams as needed as needed. * Perform other duties as assigned by leadership to meet organizational and operational needs. Education and Experience: High school degree and/or an equivalent technical school education preferred. Minimum of 3 to 5 years related Quality Inspection experience in Medical Manufacturing environment. Experience with Oracle, and Agile preferred. The annualized base salary range for this hourly role is $46,100-$69,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

Job Description Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. Remote Work Option: Remote work is permissible in some positions at SMOC depending on the key functions and responsibilities. The Lead Inspector position is eligible to work from home 0% of the week in scheduling coordination with the department manager. Monday-Friday; 9am-5pm 35

Job Title: QA Inspector - Receiving (Contract) Job Type: Full-time Busek Co. Inc. (************** researches, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Job Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. Key Responsibilities: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Qualifications: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal

Job Description The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions * Responsible for individual Inspection activities * Undergo training when necessary * Adhere to policies and procedures related to specific customer requirements * Ability to understand specific directions and follow guidelines that are common throughout the department * Ability to maintain a constant focus on quality and accuracy * Ability to work with minimal supervision * Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens * Obey all safety rules, use caution in work activities, and continuously practice safe behaviors * Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred * High school diploma or equivalent * 1 year of Product Operator experience necessary * Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities * Understand Quality Management System (QMS) requirements * Training on the specific equipment must be fully completed within 90 days of hire * Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.