Quality Control Inspector Jobs in Gaithersburg, MD

Piper Health & Sciences is seeking a QC Technician II to support the quality control microbiology department of a growing biotechnology company in the Columbia, MD area. This role is first shift, Monday - Friday working schedule. Responsibilities for the QC Technician II include: · Perform routine and in-process environmental monitoring (EM) sampling in a cleanroom environment. · Conduct and monitor environmental parameters including viable sampling, personnel sampling, temperatures, humidity, etc. · Perform bioburden, TOC, conductivity, and endotoxin analysis of water and manufacturing samples. · Properly label and document cleanroom plates, EM data, and logbooks according to Good Documentation Practices (GDP). · Compliance with Good Manufacturing Practices (GMP/cGMP) and guidelines, including proper gowning/PPE and following aseptic protocols. Qualifications for the QC Technician II include:· 2+ years of relevant EM sampling, bioburden, endotoxin, conductivity, and/or TOC analysis within a GxP regulated environment. · Prior experience within the biotechnology or pharmaceutical industry. · Minimum of a High School Diploma/GED is required. Associate's degree or Bachelor's degree in a relevant field is preferred. Compensation for the QC Technician II includes:· Salary range: approximately $22. 00 - $30. 00 hourly, commensurate with experience· Benefits: Cigna Medical, Dental, Vision, 401k w/ ADP QC micro, qc analyst, quality control, em, environmental monitoring, bioburden, endotoxin, toc, conductivity, total organic carbon, gmp, cgmp, gxp, gdp, eqms, clean room, iso 5, iso 8, microbial, microbiology, data analysis, data trending, biotechnology, life sciences, pharmaceutical, biopharmaceutical, biologics#LI-CP1 #LI-ONSITE #pando

Hogan & Sons Tire and Auto - We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages. ** REQUIRED: Must have a current/valid Virginia State Inspection Certification ** Up to $28/hr- Inspector Only ( MUST HAVE- VA state safety AND VA Emissions inspector ) TECHNICIAN W/ C.R.T ( VA state safety AND VA Emissions inspector- Where applicable ) up to $45 Flat Rate hour Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Health/Flexible Spending Account Employee Assistance Program Telemedicine Program Supplemental Critical Illness, Hospital and Accident Plans Life Insurance (Company paid) Short/Long Term Disability Health Savings and Flexible Spending Account 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! The State Inspector will perform state inspections. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Principal Duties and Responsibilities: Successfully complete inspections on customer's vehicles. Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines. Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Qualifications: High School Diploma or equivalent Possess valid driver's license Current Virginia state inspector's license + Emissions. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license, inspector's license and be able to pass a pre-employment drug test, MVR, and criminal background check. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions include product design, printed circuit board layout, test development, and manufacturing support through the whole product lifecycle. The products and designs Zentech support are an integral part of everyday life and in mission critical environments. Many can be seen every day at sporting events, on delivery trucks, in medical offices, at construction sites, on American farms, and on commercial aircraft. Other products and designs are unseen but vital, such the work we do for our domestic and foreign military customers who rely on our technical skills to help ensure our country remains safe, our warfighters remain out of harm's way, and our nation's networks remain free from intrusion. Zentech has developed strengths in the required manufacturing processes for high reliability, high complexity, low-to-medium volume printed circuit boards and box builds, all with best-in-class ability to scale to higher volume products. Zentech products are proudly Made in America. Job Description: The Quality Control Inspector performs product inspections utilizing magnified visual aids and mechanical measuring devices to ensure product conformance to internal and customer technical data package requirements. This process includes analyzing technical data packages (e.g. assembly instructions, engineering drawings, schematics, bills of material, specifications, etc.) in order to: Identify and resolve issues affecting product configuration Identify and assign rework actions necessary to rework production product Accept production product work-in-process and approve for next assigned operation Skills: Candidates must be able to work in a self directed manner in a fast-paced working environment Foster and maintain professional and productive relationships with other staff and management Possess excellent verbal and written communication skills Demonstrate proficiency in computer based applications Have experience with electronic assembly including; SMT, T/H & Mechanical Ability to effectively operate visual magnification devices (scope) Ability to effectively operate and interpret basic electronic measuring devices Ability to effectively operate and interpret basic mechanical measuring devices Qualifications: High school diploma or equivalent required, some college preferred Basic math skills required Acceptable visual acuity and eye-hand coordination Must have, or be able to acquire, operator certification for IPC-A-610 Must have, or be able to acquire, operator certification for J-STD-001 Ability to review and interpret technical data packages for electronic assemblies Physical Demands: While performing these duties, the employee is required to sit or stand for extended periods of time, reach with hand and arm, and talk or hear. Employee may be required to lift up to 50 pounds. Zentech Manufacturing is an Equal Opportunity Employer. Zentech will recruit, hire, train, and promote persons in all job titles without regard to real or perceived classification of race, ethnicity, ancestry, color, marital status, religion, national origin, veteran status, sex, sexual orientation, genetic information, gender identity or expression, age, or physical or mental disability. PIbd9a3ccbf5c8-26***********2

SUMMARY Are you an Electrical Engineering Major interested in Building Automation Systems? Havtech Solutions is looking for Summer 2024 Interns! Havtech is the Mid-Atlantic’s largest and most experienced commercial HVAC equipment, building automation, service, and energy solutions, provider. Havtech represents 50+ manufacturers in HVAC Equipment and Building Automation for both commercial and industrial markets. With the number of products we represent along with the skill and ability of our technicians to integrate multiple systems, we give our clients the opportunity to leverage the best equipment across manufacturers. WHAT WILL YOUR INTERNSHIP CONSIST OF? Learning our systems and products from a network of qualified Havtech Solutions Controls Technicians. On-site training applying knowledge of a variety of electronic or digital controls systems by assisting Controls Team with installations, programming, commissioning, troubleshooting, repair, and maintenance of building automation systems. Exposure to multiple languages of systems software used in technical projects QUALIFICATIONS include the following: Bachelor’s degree currently in progress in Electrical Engineering, Construction, or other related areas. Interest in the HVAC industry, and a potential HVAC related career track. Working knowledge of Microsoft Office (Word, Excel, and Outlook) and Web-enabled applications. Ready to learn and volunteer to assist others. Demonstrate collaborative and respectful behavior in a team environment. Excellent math aptitude. Possess time management skills and the ability to follow up. Junior and senior level students strongly preferred but class level not required. DECLARATION: Human Resources retains the sole right and discretion to make changes to this job description. Any employee making changes unauthorized by the President or Human Resources will be subject to disciplinary action up to and including termination.

7118 - Laurel - 8800 Freestate Dr, Laurel, Maryland, 20723 CarMax, the way your career should be! Under general supervision, the State Inspection Technician performs State vehicle safety inspections tests per state and/or federal regulations. *Only candidates external to CarMax will qualify to receive the sign-on bonus. Principle Duties and Responsibilities: Perform state inspections using appropriate equipment and adhering to prescribed rules, standards and procedures Ensure that all vehicles meet CarMax Final Quality Standards. Provide outstanding customer service at all times. Maintain, repair, and clean special equipment Job Specifications: Read, interpret and transcribe data in order to maintain accurate records. 2 Year automotive trade school degree or has minimum 2 years automotive experience Requires appropriate state inspection certification Work with and through associates of other departments within the store. Perform additional duties in a high-energy, fast-paced working environment as requested by supervisor Possess above attention to detail and demonstrate manual dexterity in both arms and hands Speak and listen to customers, associates and managers in person, on the phone, and/or on the radio. Lift objects that weigh as much as 50 lbs. Comply with CarMax, O.S.H.A., and EPA policies Working Conditions: Combination of both indoor and outdoor environment; May include working at times in noisy and/or inclement weather conditions. May require walking or standing for an extended time. Variable work schedules with shifts that may include nights, weekends, holidays and extended hour days. Comply with all state, federal and company regulations, procedures and work rules. Adheres to all CarMax policies including, but not limited to: Attendance, Proper Recording of Time, Asset Protection, EH&S (Environmental, Health, and Safety) and standards of Professional Appearance. Disclaimer and Approvals: This document is intended to describe the general nature and level of work being performed by people assigned to this job. This information is current at the time of publication. Responsibilities may include other duties as assigned and may be amended at the discretion of CarMax with or without notice. This document has been reviewed and approved by management and Human Resources and cannot be modified without written consent by a member of management authorized to modify any such responsibilities. CarMax is an Equal Opportunity Employer and complies with federal and state laws which forbid discrimination because of race, color, age, religion, sex, national origin, disability and other protected characteristics. Employment at CarMax is at-will, and therefore, can be terminated, with or without cause, at any time, at the option of the associate or CarMax. This at-will employment relationship will remain in effect throughout an associate's employment with CarMax unless it is modified by a specific, express written employment contract that is signed by an officer of CarMax and the associate. This at-will employment relationship may not be modified by any oral or implied agreement. Specifically, this job description is not a contract of employment and does not create any contractual rights of any kind between the Company and its Associates. The hourly rate for this position is: $23.20 - $40.60 Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commission/incentive eligible: To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company. For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our CarMax Benefits website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application .

Ameresco, Inc. (NYSE:AMRC) is a leading cleantech integrator and renewable energy asset developer, owner and operator. Our comprehensive portfolio includes energy efficiency, infrastructure upgrades, asset sustainability and renewable energy solutions delivered to clients throughout North America and Europe. Our solutions range from upgrades to facility's energy infrastructure to the development, construction and operation of renewable energy plants combined with tailored financial solutions. We foster an entrepreneurial, collaborative, and forward-thinking culture that thrives with innovation, diversity of thought, and inclusion. We are excited with all that the future holds for our industry, planet, and communities. Ameresco is currently seeking a Quality Control Inspector to join our Operations & Maintenance Team at a site in Washington, DC. This position is responsible for conducting inspections of the facility to ensure compliance with site-specific quality control standards and contract specifications. This position covers a broad scope of work, including mechanical, electrical, plumbing, and carpentry disciplines. Responsibilities: Conduct daily inspections of the facility to ensure all mechanical, electrical, plumbing, and carpentry work meet quality standards and comply with codes and regulations. Report on any facility repairs that are needed across various trades. Collaborate with contractors and Federal employees to ensure adherence to all applicable codes and regulations. Communicate effectively with team members and management, providing detailed reports on inspection findings. Document findings and report any issues, discrepancies, or potential safety hazards. Maintain accurate and up-to-date records of all inspections, including detailed reports for each discipline. Perform other duties as assigned. Minimum Qualifications: High school diploma or equivalent. Minimum 5 years of quality control experience with building trades, including mechanical, electrical, plumbing, or carpentry. Ability to review confidential US security information. Additional Qualifications: Basic computer skills for generating and maintaining reports. Strong communication and documentation skills. Willingness to conduct thorough inspections, which may include walking the entire facility daily. Ability to work with a team and interact effectively with other contractors and federal employees. Attention to detail and the ability to identify potential issues or discrepancies across multiple trades. Physical ability to walk up and down stairs frequently. #LI-AWS #LI-Onsite AMERESCO challenges the brightest, most talented and creative individuals in the industry by providing an environment that embraces initiative, diversity, and achievement along with comprehensive rewards, including people-oriented insurance, investment, and incentive plans. Genuine Ameresco communications ***************** emails; any other domain is fraudulent. Report suspected phishing to 1-866-AMERESCO. Equal Opportunity/Affirmative Action Employer/Women/Minorities/Veteran/Disability.

Quality Management Inspector page is loaded **Quality Management Inspector** **Quality Management Inspector** locations Dulles, VA time type Full time posted on Posted 24 Days Ago time left to apply End Date: November 30, 2024 (5 days left to apply) job requisition id JR10292054 Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * (English) * (Spanish) ****Job Description:**** **Airbus Commercial Aircraft** is looking for a **Quality Management Inspector** to join our team based in **Sterling, VA (near Dulles airport).** You will be part of a team which focuses on Product Assurance requirements and Regulations, Inspection Plan and/or drawings and/or specifications linked to the activity. ****Meet the team:**** From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen. ****Your working environment:**** Located just five miles from Washington Dulles International Airport, and 30 miles from the U.S. Capitol, this site serves as our major parts distribution hub in the Americas. The facility is a 24/7 fulfillment center, with an Aircraft on Ground (AOG) support desk, and Quality Assurance (QA) operations. To best support our customers, our 250,000-square-foot warehouse features a brand new technology called Autostore, aiming at increasing productivity. ****:**** * **Financial Rewards:** Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) * **Work/Life Balance:** Paid time off including personal time, holidays and a generous paid parental leave program. * **Health & Welfare:** Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. * **Individual Development:** Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. ****Your challenges:**** * Inspect varieties of finished products to ensure conformance with FAA/EASA Part 21 specifications and established quality standards, including customer requirements * Perform first article inspections on aerospace components and GSE tools. * Review, analyze, and approve aerospace articles that have been maintained under FAA/EASA Part 145 regulations and/or received special certification processes * Assist in the resolution of customer complaints concerning Proprietary Parts and Supplier quality problems * Issue Discrepancy Reports and Unserviceable Tags on non-conforming material. ****Your boarding pass:**** * A&P (Airframe and Power Plant) license or Military Maintenance Certification is required (or its equivalent) * 5+ years of maintenance experience and knowledge of aircraft operations, systems and practices * Familiarization with aerospace quality control and quality assurance systems * Aerospace Design - knowledge of design techniques, tools, and principals involved in the production of aerospace components. Ability to read and understand engineering drawings, schematics and ICA operating * Quality Management Analysis - experience in conducting tests and inspections of products, services, or processes to evaluate quality or performance * Team working mindset This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. ********Company:******** Airbus Americas Customer Services, Inc.**Employment Type:** Permanent**Experience Level:** Professional**Remote Type:** On-site**Job Family:** Quality Inspection ------ Job Posting End Date: 11.30.2024------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Mindlance is a national recruiting company which partners with many of the leading employers across the country. Feel free to check us out at ************************* Job Description Job Title: QC Inspector Location: Baltimore, MD Duration: 2+ Years Responsibilities: Inspector is in a high visibility position and therefore must always present themselves in a professional manner, with honesty and integrity. Must possess good interpersonal skills and willingness to learn. Observe, monitor and document proper completion of the following tasks in accordance with BGE specifications: Site survey Gas meter relocation To exterior Elevated Bollard installations Bucket Core drilled Bolt Down Elevate to Meter Engineering & Standards unique protection situations Coordinate with County/Municipal building inspectors for permits and final inspections Resolve customer questions and elevate to Field Supervisor as necessary unresolved issues Perform and document field safety audits. Proficient in using utility maps and locating equipment in the field. Must have 5+ years of QC inspection experience in a utility setting Gas OQ certified and/or Master Plumber/Gas Fitter are preferred Additional Information Thanks & Regards' ___________________________________________________________________________ Vikram Bhalla | Team Recruitment | Mindlance, Inc. | W: ************ All your information will be kept confidential according to EEO guidelines.

Main Tasks & Responsibilities: + Responsible for performing inspections during the overall production process, which ranges from quality of raw materials (incoming material inspections) before manufacturing begins to final inspections, when production is completed. The Quality inspector is responsible for a final in-depth inspection, before signing off and approving the product for shipment to the customer. In addition, the quality inspector is responsible to fins the faults in both materials and the manufacturing process an initiate corrective actions which will correct or eliminate identified faults, to ensure a better finished product. + Inspecting and approval of incoming materials for use in production, by confirming compliance with our clients designs, and customer specifications; conducting visual inspections and physical measurements, as needed, to keep non- conforming materials from getting into the production operations. + Inspecting in-process assembly and production operations to confirm compliance with our clients and customer procedures, requirements, and specifications; conducting visual inspections and physical measurements, as needed, to assure that production results are as designed and expected. + Documenting and reporting quality non-conformances and process issues to the quality and production supervisors where adjustments can be introduced to eliminate nonconforming conditions. + Enforcing quality corrective actions to ensure that the corrective actions effectively remedy production quality discrepancies and justify closure of Non-Conforming Reports (NCRs). + Prepares quality inspection results records and submits copies of all final inspection quality records to the Quality Supervisor(s) or Quality Document Control Clerk for including those records into the Car History Books. + Verifies effectiveness of quality control inspections (Incoming, In-process or Final inspections). + Audit and monitor quality requirements in accordance with the company quality assurance policies, procedures, project Quality Assurance Plans (QAP) and customer specifications. + Ensure that all work is performed per inspection procedures. + Perform inspections during production in-process operations and completes the final inspections. + Initiate Non-Conformance reports (NCRs) as required to document and record noncompliant materials, processes, or production quality results. + Document and report inspection findings and results to ensure that nonconforming conditions have been resolved. + Regularly audit and inspect production assembly and instruction packages on the shop floor, to ensure that production documents are the current and the latest customer approved configuration. + Perform other miscellaneous duties as assigned by the Quality Supervisor(s) or Quality Management. + Ability to interpret and read production drawings and schematics, good verbal and written communication skills. + Computer skills to support entry or retrieval of data and information via computer applications and systems consisting of various databases and other internal programs. + Must have the ability to log in production related non-conformities and generate corresponding reports (NCR) and Car History Book documents. + Must have demonstrated proficiency in the following areas or items: + Attention to detail + Working knowledge of computer applications and computer systems such as, Ms- Office Applications (Ms-Excel, PowerPoint, and Ms-Word) + Working knowledge of Adobe Acrobat. At least 2-years or more of experience in quality control performing quality inspections, in a manufacturing organization such as, aerospace, automotive, or passenger transportation industries (passenger airplanes, passenger cars, passenger buses, or passenger rail vehicles). EDUCATION: Minimum Education Requirement - High School Diploma or equivalent, technical trade school, or 2-year College Associate's Degree . PHYSICAL DEMANDS: + While performing the duties of this job, the employee is frequently required to walk. The employee occasionally is required to stand; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. + The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 75 pounds. WORK ENVIRONMENT: + This position works in a warehouse/production environment. The employee occasionally works near moving mechanical parts. The noise level in the work environment is usually loud. + The performance of this position requires exposure to the manufacturing areas where certain areas require. This position is a 6 month contract that will then go permanent. $24/hr to start then $28/hr after going permanent. #LI-JB1 #M1 System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Quality Assurance, Inspector Key Job Responsibilities: * Conduct inspections to ensure compliance and conformance with project or contract specifications * Conduct inspections in accordance with Quality Control Plan * Conduct inspections to ensure adherence to applicable legal requirements * Confer with Quality Assurance, Manager as appropriate * Read blueprints and specifications * Monitor operations to ensure that they meet specifications * Recommend adjustments to the assembly or installation process * Inspect, identify, and submit material, components, or products for testing and measurement * Operate electronic inspection equipment and software * Document approval or rejection of inspected material, components, or products * Identify for removal all components, products and materials that fail to meet specifications * Report inspection and test data and quantities inspected * Participate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work. * Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures * Participate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents. * Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC. * Collect data, analyze for continuous improvement, and share with project team weekly. * Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work. * Document daily QC reports * Understand and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS. * Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment. * Immediately notify operators, or supervision of any non-conformances in products * Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) * Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. * Assist in the training of operators and provide guidance. Assist in the problem-solving process. * Participate in the Daily ORM work briefings to represent the Quality Portion. * Assist in root cause, corrective and preventive action development for systemic issues. Advise appropriate party of any corrective action to be taken. * Coordinate with supervisor to ensure all shifts are covered appropriately in case of absence of an inspector. Required Qualifications: * Associates Degree in Technical Discipline (may be substituted for quality related experience) * At least 6 years hands-on experience in construction, estimation, and/or quality control activities. * Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards * Experience with receiving, production, shipping and quality processes. * Excellent communication skills (written, and verbal) * Strong attention to details, highly organized and computer literate. * Ability to work well in a fast-paced manufacturing environment Certification Requirement: * Possess Journeyman Electrical License or obtain the Journeyman License within 6 months of employment. Abilities: * Exposure to computer screens for an extended period of time. * Sitting for extended periods of time. * Reach by extending hands or arms in any direction. * Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. * Listen to and understand information and ideas presented through spoken words and sentences. * Communicate information and ideas in speaking so others will understand. * Read and understand information and ideas presented in writing. * Apply general rules to specific problems to produce answers that make sense. * Identify and understand the speech of another person.

Shift: 5:30am - 9:30am (Monday through Friday) Set Pay Rate: $22.66 Responsible for assisting in quality control and providing training and assistance for custodial work according to the provisions of the contract. Position requires strong interpersonal skills and compassion and respect for persons with disabilities. Essential Functions: Complies with all Agency policies and procedures and follows contract specifications Keeps up with contract changes, modifications, and provisions Monitors customer and Agency compliance with applicable contract specifications Follows prescribed inspection procedures Makes daily routine inspections Inspects all cleaning work performed to ensure high quality and adherence to contract Prepares inspection and observation reports and submits daily Maintains a file of inspection reports and other required reports on an electronic tracking system Utilizes inspections to ensure a continuous improvement process and high quality work Strives to improve customer satisfaction and reduce cleaning complaints Responds promptly to contracting office staff, building management, and customers Walks worksite with COTR weekly or as required by contract Attends meetings and training programs and applies required changes Attends work regularly according to assigned work schedule Complies with dress code and personal hygiene standards Passes and complies with all building and security requirements and procedures Wears ID badge(s) at all times while performing work under this Contract Attends and participates in in-service training, staff meetings, and other activities to facilitate professional development Works cooperatively with others in a manner which is positive, enthusiastic, respectful and courteous Secondary Functions: Performs other duties, tasks, and special projects as required *Duties, responsibilities, and tasks may change at any time with or without notice Physical Abilities Needed to Meet Work Demands: Ability to stand or walk for long periods of time Ability to go up and down stairs Ability to reach above the head, bend, kneel, and, stoop Ability to lift, carry, and push up to 50 lbs. as needed Ability to work in dusty spaces or adverse weather conditions Ability to see details on the floor, above the head, or on surfaces Job Competencies Needed for Success on the Job: Ability to work independently and collaboratively with others Ability to be flexible and dedicated to quality and customer service Ability to work in a constant state of alertness and with safety always in mind Ability to supervise and develop others Ability to make decisions and solve problems Ability to plan, implement, organize, and prioritize Ability to manage multiple tasks effectively Ability to react immediately to emergency situations Ability to analyze data and recommend corrective action Ability to read, understand, and apply complex contract provisions and technical material Ability to maintain and submit reports, logs, and other paperwork in a timely manner Ability to understand and comply with safety procedures and environmental requirements Ability to report problems and supply and equipment needs to proper authority Ability to use technology for completion of specified job duties Ability to manipulate numbers Ability to act with integrity and ethical standards in job performance Ability to operate machinery without posing a safety hazard to self or others Ability to use and care for equipment and cleaning supplies properly Ability to complete tasks in a timely manner with numerous interruptions Ability to work a flexible schedule Ability to deal with others in a positive, enthusiastic, respectful, and courteous manner Ability to provide guidance, direction, and technical support Other requirements: Valid driver's license from state of residence and ability to drive, if applicable for site License must have been valid for at least 3 years Acceptable driving record as determined by Agency's insurance carrier and by Chimes DC policies and procedures If driving 15 passenger van, must be at least 25 years old Ability to acquire and maintain Security Clearance Essential Personnel: This position is designated as essential. This means that when the facility is faced with an institutional emergency, employees in this position may be required to remain at their work location or to report to work to protect, recover, and continue operations at the facility. Education: High School diploma or equivalent Valid CPR/FA certification preferred Knowledge of green cleaning principles and CIMS certification requirements Knowledge of quality standards Knowledge of regulatory standards, hospital standards, and facility management Knowledge about regulations for SDS, Fire and Safety, Hazard Communications and Bloodborne Pathogens Experience: Minimum of 2 years' experience in past 5 years performing quality control inspections Experience with electronic tracking systems such as JAMS Notes: At the discretion of the Personnel Officer, additional related experience and/or education may be substituted in lieu of the requirements specified above under Education and Experience

* Tribal 1 Construction * Gaithersburg, MD, USA * 80000-100000 per year $80,000 - $100,000 / DOE * Salary * Full Time * *Health, dental and vision insurance; disability and life insurance; and 401(k) with match; paid time off; and paid holidays.* Email Me This Job **Tribal One Construction** is looking to hire a **full-time Safety/Quality Control Officer** to join our team in Gaithersburg, Maryland. Are you looking to **advance your career****growing and innovative** construction company that **values its employees** This is a Safety/Quality Control Officer position with a small company managed by a cohesive team of professionals that is looking to increase our capability. This position earns a **competitive wage** of **$80,000 - $100,000/annual**, depending on experience. We provide outstanding **benefits**, including **an annual incentive bonus program; auto and cell phone allowances; health, dental, vision, disability, and life insurance programs; and a 401(k) plan with company match**! **ABOUT TRIBAL ONE CONSTRUCTION** Tribal One Companies was formed in February of 2012 to provide our clients with comprehensive construction services. We provide these services to the U.S. Federal Government, State and local Governments, businesses, organizations, and Tribal entities. Tribal One executes a wide array of projects including vertical and horizontal construction projects, and through integrity, hard work and innovation; we continue to exceed the expectations of our clients on every project we take on. We are proud to say our employees are some of the best in the industry and work hard to create partnerships with our clients and partners built on mutual trust. Through open and honest communication, our team never fails to safely deliver projects on schedule and within budget. Our top priority is taking care of our people. We provide a **positive work environment** and are dedicated to helping our employees develop the **skills needed to help build successful careers**. **A DAY IN THE LIFE OF A SAFETY/QUALITY CONTROL OFFICER** The Construction Safety/Quality Control Officer is responsible for overseeing safety protocols and ensuring that all construction activities meet the required quality standards on a federal construction project. The role involves implementing safety programs, conducting inspections and ensuring that all construction activities adhere to federal, state and local laws and guidelines. The Safety/Quality Control Officer also ensures that the work meets the project specifications, standards and requirements as outlined in the contract documents. The following will provide a base for you to compare your experience and knowledge against. This list is not intended to be inclusive of the experience and skills necessary to perform the duties of this position. **Duties/Responsibilities:** **Safety Responsibilities** * Implement Safety Protocols: Develop, implement and manage safety plans in compliance with federal Occupational Safety and Health Administration (OSHA) guidelines and other relevant federal regulations. * Inspections: Conduct regular site inspections to ensure safety measures are in place and effective, including identifying and rectifying safety hazards. * Training: Provide safety orientation and ongoing safety training for site personnel. Ensure workers are aware of safety procedures, including the use of personal protective equipment (PPE). * Incident Reporting: Investigate accidents, near-misses and safety incidents, including reporting such incidents to federal authorities as required. Ensure corrective actions are taken to prevent future incidents. * Documentation: Maintain safety logs, accident reports and inspection records in compliance with federal and project-specific requirements. * Emergency Response: Develop and implement emergency response plans. Lead site emergency drills and coordinate with emergency services when necessary. **Quality Control Responsibilities** * Quality Assurance: Ensure that all construction activities meet the quality standards and requirements outlined in the contract, including federal and state regulations. * Inspections: Conduct regular quality inspections of materials, workmanship and equipment to ensure compliance with project specifications. * Submittals and Testing: Review and approve submittals, shop drawings and samples. Coordinate material testing with third-party laboratories to verify compliance. * Non-Conformance Reporting: Identify non-conforming work, report deviations and ensure corrective actions are taken. Track and document any quality deficiencies. * Documentation: Maintain a detailed record of inspection reports, testing results and corrective actions. Prepare daily quality reports for submission to the Project Manager and federal oversight bodies (if required). * Coordination with Subcontractors: Ensure that subcontractors adhere to quality control standards and safety regulations. **Federal Compliance** * Adherence to Federal Standards: Ensure all construction activities comply with federal guidelines, including those outlined by OSHA, the Environmental Protection Agency (EPA) and other relevant agencies. * Federal Reporting: Prepare and submit required safety and quality documentation to federal agencies overseeing the project, including periodic compliance reports. * Labor Compliance: Ensure compliance with the Davis-Bacon Act and other labor-related federal guidelines, including proper documentation of employee wages and benefits. Other duties as assigned by management. **Job Qualifications:** * Bachelor's degree in construction management, engineering, occupational health and safety or a related field is preferred. Equivalent work experience may be considered. * Minimum of five (5) years of experience in construction safety and quality control, preferably on federal construction projects. * Familiarity with federal contracting regulations (FAR) and federal safety/quality standards. * Must be either a citizen of the U.S. or a non-U.S. citizen who has been lawfully admitted for permanent residence as evidenced by a Permanent Resident Card (USCIS I-551). * Certifications: + Certified Safety Professional (CSP), Occupational Health & Safety Technologist (OHST) or similar, preferred. + OSHA 30-hour Construction Safety certification, required. + Quality Control certification, such as Certified Quality Manager (CQM) by the Construction Quality Management (CQM) programs for contractors, preferred. * Ability to successfully pass and remain in compliance with required background checks from Tribal 1 and any required federal government background checks. * Must pass drug screen and remain in compliance with drug free workplace policies. * Valid driver's license. * Ability to lift 50 pounds, stand or sit for long periods of time, access roofs, crawl spaces and all construction areas. If you feel that you would be right for this Safety/Quality Control Officer job, please fill out our initial **3-minute, mobile-friendly application**. We look forward to meeting you! Location: 20899

Job Description Tribal One Construction is looking to hire a full-time Safety/Quality Control Officer to join our team in Gaithersburg, Maryland. Are you looking to advance your career? Do you have experience as a Safety/Quality Control Officer? Would you like to work for a growing and innovative construction company that values its employees? If so, please read on! This is a Safety/Quality Control Officer position with a small company managed by a cohesive team of professionals that is looking to increase our capability. This position earns a competitive wage of $80,000 - $100,000/annual, depending on experience. We provide outstanding benefits, including an annual incentive bonus program; auto and cell phone allowances; health, dental, vision, disability, and life insurance programs; and a 401(k) plan with company match! ABOUT TRIBAL ONE CONSTRUCTION Tribal One Companies was formed in February of 2012 to provide our clients with comprehensive construction services. We provide these services to the U.S. Federal Government, State and local Governments, businesses, organizations, and Tribal entities. Tribal One executes a wide array of projects including vertical and horizontal construction projects, and through integrity, hard work and innovation; we continue to exceed the expectations of our clients on every project we take on. We are proud to say our employees are some of the best in the industry and work hard to create partnerships with our clients and partners built on mutual trust. Through open and honest communication, our team never fails to safely deliver projects on schedule and within budget. Our top priority is taking care of our people. We provide a positive work environment and are dedicated to helping our employees develop the skills needed to help build successful careers. A DAY IN THE LIFE OF A SAFETY/QUALITY CONTROL OFFICER The Construction Safety/Quality Control Officer is responsible for overseeing safety protocols and ensuring that all construction activities meet the required quality standards on a federal construction project. The role involves implementing safety programs, conducting inspections and ensuring that all construction activities adhere to federal, state and local laws and guidelines. The Safety/Quality Control Officer also ensures that the work meets the project specifications, standards and requirements as outlined in the contract documents. The following will provide a base for you to compare your experience and knowledge against. This list is not intended to be inclusive of the experience and skills necessary to perform the duties of this position. Duties/Responsibilities: Safety Responsibilities Implement Safety Protocols: Develop, implement and manage safety plans in compliance with federal Occupational Safety and Health Administration (OSHA) guidelines and other relevant federal regulations. Inspections: Conduct regular site inspections to ensure safety measures are in place and effective, including identifying and rectifying safety hazards. Training: Provide safety orientation and ongoing safety training for site personnel. Ensure workers are aware of safety procedures, including the use of personal protective equipment (PPE). Incident Reporting: Investigate accidents, near-misses and safety incidents, including reporting such incidents to federal authorities as required. Ensure corrective actions are taken to prevent future incidents. Documentation: Maintain safety logs, accident reports and inspection records in compliance with federal and project-specific requirements. Emergency Response: Develop and implement emergency response plans. Lead site emergency drills and coordinate with emergency services when necessary. Quality Control Responsibilities Quality Assurance: Ensure that all construction activities meet the quality standards and requirements outlined in the contract, including federal and state regulations. Inspections: Conduct regular quality inspections of materials, workmanship and equipment to ensure compliance with project specifications. Submittals and Testing: Review and approve submittals, shop drawings and samples. Coordinate material testing with third-party laboratories to verify compliance. Non-Conformance Reporting: Identify non-conforming work, report deviations and ensure corrective actions are taken. Track and document any quality deficiencies. Documentation: Maintain a detailed record of inspection reports, testing results and corrective actions. Prepare daily quality reports for submission to the Project Manager and federal oversight bodies (if required). Coordination with Subcontractors: Ensure that subcontractors adhere to quality control standards and safety regulations. Federal Compliance Adherence to Federal Standards: Ensure all construction activities comply with federal guidelines, including those outlined by OSHA, the Environmental Protection Agency (EPA) and other relevant agencies. Federal Reporting: Prepare and submit required safety and quality documentation to federal agencies overseeing the project, including periodic compliance reports. Labor Compliance: Ensure compliance with the Davis-Bacon Act and other labor-related federal guidelines, including proper documentation of employee wages and benefits. Other duties as assigned by management. Job Qualifications: Bachelor's degree in construction management, engineering, occupational health and safety or a related field is preferred. Equivalent work experience may be considered. Minimum of five (5) years of experience in construction safety and quality control, preferably on federal construction projects. Familiarity with federal contracting regulations (FAR) and federal safety/quality standards. Must be either a citizen of the U.S. or a non-U.S. citizen who has been lawfully admitted for permanent residence as evidenced by a Permanent Resident Card (USCIS I-551). Certifications: Certified Safety Professional (CSP), Occupational Health & Safety Technologist (OHST) or similar, preferred. OSHA 30-hour Construction Safety certification, required. Quality Control certification, such as Certified Quality Manager (CQM) by the Construction Quality Management (CQM) programs for contractors, preferred. Ability to successfully pass and remain in compliance with required background checks from Tribal 1 and any required federal government background checks. Must pass drug screen and remain in compliance with drug free workplace policies. Valid driver's license. Ability to lift 50 pounds, stand or sit for long periods of time, access roofs, crawl spaces and all construction areas. Are you attentive to detail, want to work hard and be rewarded for it? Do you have excellent verbal and written communication skills? Can you balance multiple tasks while adapting to an evolving market? Are you self-confident, reliable and responsible? Do you have superb problem-solving abilities? If yes, you might just be perfect for this Safety/Quality Control Officer position! ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this Safety/Quality Control Officer job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 20899 Job Posted by ApplicantPro

$22.42/hr The Quality Control Inspector implements quality control procedures to ensure compliance with contract specifications through inspection of completed work tasks. Inspections are documented using a CMMS so that data is available for analysis and reporting and to generate needed work orders for corrective actions. Implements inspection procedures, checklists, and schedules. Communicate inspection results with the QC Coordinator, QA Manager, or Director Quality Development - as appropriate. Releases inspection reports in accordance with the contract and Didlake operating procedures. Meets regularly with QC Coordinator and the QA Manager/Director Quality Development to provide written, and/or oral status reports on quality assurance program. Participates in all initial training programs and assists with conducting training as required or requested. Fosters teamwork while balancing team and individual responsibilities; giving feedback to nurture a positive team spirit and quality performance; and modeling dependability, hard work, strong business ethics, and professional personal appearance. Assures safety of employees by monitoring proper use of equipment and adherence to safety policies as discovered through inspection activities. Fosters an atmosphere that promotes Human Rights for all clients and ensures training, incident reporting, and awareness of responsibilities of all personnel regarding Human Rights matters. Completes required paperwork and/or documentation. Completes and maintains all Didlake required training. Responsible for appropriate conduct and demeanor as dictated by Didlake policy. Other duties as assigned, or as stated in Statement of Work. Didlake, Inc. is a non-profit rehabilitation services organization. At Didlake, creating opportunities that enrich the lives of people with disabilities is our mission. Since 1965, Didlake has served thousands of people with significant disabilities by providing training, job placement, employment opportunities and day support services. We provide rewarding and purposeful work.

Quality Control Inspector Job Responsibilities: The Quality Control Inspector is responsible for performing inspections during the overall production process, which ranges from quality of raw materials (incoming material inspections) before manufacturing begins to final inspections, when production is completed. The Quality inspector is responsible for a final in-depth inspection, before signing off and approving the product for shipment to the customer. In addition, the quality inspector is responsible to fins the faults in both materials and the manufacturing process an initiate corrective actions which will correct or eliminate identified faults, to ensure a better finished product for customers. Quality Control Inspector Job Duties: The Quality Control Inspector, provides guidance and supervision to the company’s quality control inspectors by assigning quality inspection assignments, policing the production line to ensure that production workers are using the latest production documentation and drawings to assemble and build products. The Quality Control Inspector monitors production operations for correct materials, use of calibrated production tools, and acceptable workmanship. The Quality Control Inspector, monitors the production line or operations to ensure that Hitachi Rail USA’s production operators or workers are not using nonconforming materials or practices. The Quality Control Inspector is responsible for; Inspecting and approval of incoming materials for use in production, by confirming compliance with designs, and customer specifications; conducting visual inspections and physical measurements, as needed, to keep non-conforming materials from getting into the production operations. Inspecting in-process assembly and production operations to confirm compliance with Hitachi Rail USA’s and customer procedures, requirements, and specifications; conducting visual inspections and physical measurements, as needed, to assure that production results are as designed and expected. Documenting and reporting quality non-conformances and process issues to the quality and production supervisors where adjustments can be introduced to eliminate nonconforming conditions. Enforcing quality corrective actions to ensure that the corrective actions effectively remedy production quality discrepancies and justify closure of Non-Conforming Reports (NCRs). Prepares quality inspection results records and submits copies of all final inspection quality records to the Quality Supervisor(s) or Quality Document Control Clerk for including those records into the Car History Books. Verifies effectiveness of Hitachi’s quality control inspections (Incoming, In-process or Final inspections). Audit and monitor quality requirements in accordance with the company quality assurance policies, procedures, project Quality Assurance Plans (QAP). and customer specifications. Ensure that all work is performed per Hitachi’s inspection procedures. Perform inspections during production in-process operations and completes the final inspections. Initiate Non-Conformance reports (NCRs) as required to document and record noncompliant materials, processes, or production quality results. Document and report inspection findings and results to ensure that nonconforming conditions have been resolved. Regularly audit and inspect production assembly and instruction packages on the shop floor, to ensure that production documents are the current and the latest customer approved configuration. Perform other miscellaneous duties as assigned by the Quality Supervisor(s) or Quality Management. Education: Minimum Education Requirement – High School Diploma or equivalent, technical trade school, or 2-year College Associate’s Degree. Experience: At least 2-years or more of experience in quality control performing quality inspections, in a manufacturing organization such as, aerospace, automotive, or passenger transportation industries (passenger airplanes, passenger cars, passenger buses, or passenger rail vehicles). Other Experience or Training: Ability to interpret and read production drawings and schematics, good verbal and written communication skills. Computer skills to support entry or retrieval of data and information via Hitachi’s computer applications and systems consisting of various databases and other internal programs. Must have the ability to log in production related non-conformities and generate corresponding reports (NCR) and Car History Book documents. Must have demonstrated proficiency in the following areas or items: Attention to detail Working knowledge of computer applications and computer systems such as, Ms-Office Applications (Ms-Excel, PowerPoint, and Ms-Word) Working knowledge of Adobe Acrobat.

3800 Cedar Dr Gwynn Oak, MD 21207-6358 ************ **Do Not Sell My Personal Information** ** Manage Consent Preferences** Always Active **Sale of Personal Data** * label * label

Perform quality control /assurance/ of the Building Operations Support (BOS) services at the Mark Center in Alexandria, VA. This includes the mechanical/electrical/plumbing (MEP) and custodial subcontractors, vendors (e.g., elevators, escalators, boilers, chillers, generators, etc.), and IDIQ construction and repair projects. Ensure compliance with the contract Performance Work Statement and Performance Requirements Summary. Continually drive improvement through proactive problem solving. Support the BOS vision and objectives. Position reports directly to the Quality Manager. Primary Duties Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities will be rated on the Annual Performance Review. + Independently conduct quality inspections/reviews with emphasis on our MEP subcontractor and technical vendors (e.g., elevator and escalator maintenance; security doors, turnstiles and gates, boilers, chillers, generators, etc.). Interact and coordinate with the MEP team and SSI leadership to help ensure contract requirements are met or exceeded, and MEP work is performed accurately and timely. + Utilize Maximo, a computerized maintenance management system (CMMS), for QC documentation. Attend training and quickly become a proficient user of the software features and capabilities. Independently write reports clearly and accurately so issues are easily understood by both a technical and non-technical audience. + Oversee project quality control plan for IDIQ projects by executing submittal review process, three phase control system, material inspection, QA/QC/safety inspections and documentation. + Provide administrative support to the Quality Manager; manage and maintain records and inspection documentation; track status of issues, inspections , etc., and ensure timely closeout; generate monthly status report. + Periodically evaluate the status of programs/issues through research, data collection, and data/trend analysis. Draw valid conclusions and recommend/implement improvements in coordination with responsible party. This requires knowledge and experience in trouble-shooting building systems (e.g., back-up generators, UPS, boilers, chiller plants, switchgear, water chemistry, heat exchanger, etc.). + Provide quality recommendations to SSI management on best business practices to improve performance and increase customer satisfaction. Assist the BOS team in the achievement and retention of LEED EBOM certification for the Mark Center. Additional Duties + Assume Quality Manager roles and responsibilities as needed for all quality aspects of the Base Operations & Support (BOS) contract at the Mark Center. + Drive continual quality improvement in a facilities management service environment by recommending process improvements. + Assist in the quality assurance and quality control in functional areas and participate in Leadership Walkthroughs/Open Forums. + Apply knowledge of ISO 9001:2015 to ensure SSI at the Mark Center maintains its certification. + Respond to unforeseen programmatic situations needing an initial response and assessment. Transpose handwritten notes into electronic form. + Create corrective action documentation for quality investigations and communicate status of open actions to the Quality Manager and others as required. + Track and verify effectiveness of corrective actions. + Assist in the training of non-quality staff for the overall improvement of the quality management system. + Perform other responsibilities as assigned. Qualifications: Education, Experience, and Certification(s ) + US citizen or permanent resident with minimum 3 years of residency status in US. + Ability to clear government employment background check. + Bachelor's degree in engineering, construction management, or related field required. + Five years of experience in construction quality control of commercial/industrial projects or quality control/assurance inspections in facility management services with emphasis on building mechanical, electrical systems, and masonary or carpenting required. + Possess or immediately obtain CQM (Construction Quality Management) certification from USACE (US Army Corps of Engineers). + Experience with USACE CQM three-phase control system required. + Experience with USACE EM 385-1-1 or OSHA 10/30 in general industry or construction preferred. + Thorough knowledge of construction materials and processes required. + Thorough knowledge of submittal review process required. + Experience in hazard identification and safety compliance required. Knowledge, Skills, and Abilities + Ability to ensure workers comply with safety standards (construction or facility services), working knowledge of OSHA regulations. + Experience with ISO 9001:2015. + Ability to analyze complex documents such as spreadsheets and procedure manuals, read blueprints and drawings, review codes and regulations, analyze graphs and tables, and monitor trends. + Ability to independently write reports clearly and accurately. + Strong organizational and analytical skills; attention to detail and accuracy is essential. + Ability to manage multiple diverse projects at one time. + Ability to work effectively in a fast-paced construction environment. + Strong leadership skills. + Proficient in Microsoft Office Suite. + Strong written and verbal communication skills. + Ability to take initiative, demonstrate resourcefulness, and work with minimal supervision/direction. Safety & Health Responsibilities ServiceSource is committed to providing and maintaining a safe, secure and healthy work environment for all employees, persons-served, volunteers and visitors. As part of this commitment, ServiceSource has developed safety, security and occupational health policies, practices, guides and standards. With this understanding, all employees are required to: + Adhere to all local, state and federal safety and environmental codes, ordinances, standards and laws. + Adhere to all corporate and local safety plans, policies, practices and standards. + Be aware of and follow all safety rules of your work site. + Report any unsafe conditions or accidents to your supervisor. + Practice standard precautions (formerly universal precautions) always. + Participate in mandatory or available safety training. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be required to stand for extended periods; reach with hands and arms; and talk or hear. The employee is occasionally required to walk and sit. The employee may occasionally lift or move products and supplies, up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually quiet, although occasionally may be exposed to equipment operations (e.g., loading dock area). ServiceSource is committed to hiring and retaining a diverse workforce and building an inclusive workplace. We are an Equal Opportunity and Affirmative Action Employer, making employment decisions without regard to a person's race, color, religion, sex (including pregnancy, sexual orientation, gender identity and transgender status), national origin, age (40 or older), veteran status, disability, or any other protected class. We are an E-Verify Employer and a drug-free workplace. Pre-employment background checks are required for all employment positions. PAY TRANSPARENCY POLICY STATEMENT: The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information

Frederick, MD - Frederick, MD High School QA - Quality Control **OUR COMPANY** As a manufacturing firm, ACDi's biggest differentiator is our people. We're here to do more than simply build "widgets". Our people offer solutions to challenging design and product development issues and are passionate about hitting customer delivery schedules and exceeding expectations. We approach each project understanding that achieving the highest quality possible is required for every step of the electronics design, engineering, and manufacturing process. What we do day-in and day-out has a lasting, meaningful impact across many industries and in the lives of everyday people. At ACDi we create a seismic measuring system that prevents people from getting stuck in elevators during an earthquake; we defend our nation by helping to build gun turrets for tanks, communication systems for troops, and military avionics; we support NASA programs with communications systems that converse with launched vehicles. We approach each project understanding that achieving the highest quality possible is required for every step of the electronics manufacturing process, because these projects help keep our country and people around the world safe, secure, and free. At ACDi, we're more than just a contract manufacturer. **POSITION SUMMARY** The Quality Control Inspector will perform inspection of electronic components, sheet metal fabricated items, printed circuit boards and hardware to ensure compliance with quality standards and specifications. **ESSENTIAL DUTIES & RESPONSBILITIES** *To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Others duties may be assigned.* * Perform inspections on first article, incoming, in-process and final products by confirming product meets applicable IPC-A-610, IPC/WHMA-A-620, and IPC J-STD-001 workmanship standards, internal requirements, and customer documents, such as assembly drawings and bill-of-materials (BOM) * Perform AOI inspection for accurate, consistent detection of SMT paste, component placement and solder joint defects * Conduct visual and measurement tests * Document and communicate rejections of unacceptable items as required in a timely manner * Maintain accurate records of inspections * Generate interdepartmental forms/reports such as corrective action reports, scrap reports, non-conformance reports and any other required quality records * Perform internal manufacturing process audits as directed by the Quality Manager * Interact with the purchasing department around non-conforming product dispositions * Assist with receiving and stockroom functions to include the receipt, stocking and pulling of material * Other duties as assigned **SPECIFIC EDUCATIONAL/EXPERIENCE REQUIREMENTS** *The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.* * High school diploma or general education (GED) is required * 1-3 years of related inspection experience in a manufacturing environment is preferred **REQUIRED/PREFERRED SKILLS** * Knowledge of ISO9001 quality management system is preferred * Knowledge of IPC-A-610, IPC/WHMA-A-620, and IPC J-STD-001 workmanship standards * Strong verbal and written communication skills * Ability to read and/or interpret rough schematics, complex drawings, wiring diagrams, verbal instructions, and BOMs * Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements are met * Prior experience working with an ERP system is required, experience using Epicor is a plus * Strong attention to detail is required **BENEFITS** * Five (5) weeks PTO per year * Eight (8) paid holidays per year * 401(k) Retirement Savings Plan with employer match * Medical/Dental/Vision coverage (first of the month following hire date) * HSA & FSA Plans (with HSA employer contribution) * Company-paid life insurance **PHYSICAL DEMANDS** *The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.* While performing the duties of this job, the employee is regularly required to talk, hear, and use of vision. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. The employee frequently is required to walk and sit; occasionally required to stand. Employee must have use of hands and arms to reach overhead, finger, handle or feel. The employee must frequently lift and/or move up to 20 pounds. **ENVIRONMENT CONDITIONS** *The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.* While performing the duties of this job, the employee is occasionally exposed to hazards (chemical, mechanical and/or radiant energy). Employee will be required to wear protective equipment such as lab coat and heel straps. All of the work will be performed indoors. The noise level in the work environment is usually quiet. The employee may rarely be asked to travel on business. **ACDi is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by the law.**

Piper Life Sciences is seeking a QC Analyst for a well-known biotech organization in the Gaithersburg, MD area. The QC Analyst will be supporting microbiology, environmental monitoring (EM) and utility testing programs for a GMP facility. Responsibilities for the QC Analyst:· Create and maintain materials and reagents needed to execute experiments· Perform environmental monitoring and utility testing of the GMP facility· Conduct routine testing including bioburden, endotoxin testing & TOC testing· Assist with training other QC Micro AnalystsQualifications for the QC Analyst:· Bachelor's Degree in Biology, Microbiology, Biotechnology, Chemistry, Biomedical Engineering or other life science related field· Experience performing environmental monitoring, endotoxin, bioburden & TOC testing Compensation for the QC Analyst:· Compensation: Between $30. 00 - $43. 00 per hour based on years of relevant experience· Benefits: Full Medical, Dental & Vision Insurance, 401k Keywords:Research Associate, biotechnology, pharmaceutical, pharma, pharm, biotech, RA, research technician, laboratory technician, research assistant, researcher, ex vivo, cell culture, ELISA, cell maintenance, bioengineering, tissue engineering, biomaterials, cell characterization, mammalian cell lines, cho cells, 3D Printer, qPCR, PCR, tissue culture, materials science, bioink, cellularization, aseptic technique, immunostaining, qc, quality control, microbiology, microbiologist, EM, environmental monitoring, bioburden, endotoxinC#LI-BN1#LI-ONSITE