Quality control inspector jobs in Galveston, TX - 256 jobs

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. Essential Duties and Responsibilities Conduct QC inspections and audits on contract requirements, and other services performed. Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. Checks randomly selected samples, and verifies accuracy of equipment or process. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Schedule inspection activities. Knowledge, Experience and Skill Requirements Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards Knowledge of recognized and generally accepted good engineering practice regulations and codes. Excellent analytical and computer skills, specifically in MS Office Suite. Strong written and oral communication and presentation skills. Strong teamwork and interpersonal skills Work Experience Up to 2 years of experience of Quality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide. Education, Licenses and Certification Required: High School Diploma OSHA Certification This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Quality Control Inspector II (Current Aerospace Industry Exp. Req.) Employment Type Full-Time Benefits Offered Dental, Life, Medical, Paid Time Off, Retirement, Vision Compensation $20 to $23 per hour to be determined at the time of the interview with our customer. This is a Permanent position. Our customer is a leading and growing company in the aerospace market that has grown every year since our inception over 20 years ago. Key Responsibilities and Accountabilities: · Examine materials and final products, calculates tolerances and dimensions using hand tools, verifies conformance to standards, reads work orders, routers and blueprints to determine product specifications as a part of inspecting products and materials in process and in final inspection · Document / record quality inspection information · Evaluate information to determine whether parts and materials conform to regulations and standards · Maintain current knowledge of organizational policies and procedures, federal and state policies and directives · Analyze data or information · Establish and maintain interpersonal relationships · Evaluate information to determine compliance with standards Professional Skills: · HS diploma or equivalent or equivalent combination of experience/education · 4 or more years of related experience required · Intermediate knowledge of mathematics and applications · Basic AS9100 knowledge · Intermediate knowledge of machines and tools, including their designs, uses, repair, and maintenance. This includes Keyence inspection equipment, optical comparators, digital micrometers and calipers, gage pins, ring gages, dial indicators, concentricity gage, thread segments Intermediate knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints (including geometric dimension and tolerancing features), drawings, and models as well as advanced knowledge of geometric dimension tolerancing (GD&T) features Physical Requirements and Working Condition: · Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, and ladders · Must be able to work at heights utilizing fall protection equipment (man lifts, ladders, and stand) · Must be able to lift up to 45lbs · Subject to environmental conditions -protection from weather conditions but not necessarily from temperature changes · Subject to hazards to include a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat or exposure to chemicals · Subject to loud constant noise Subject to atmospheric conditions such as fumes, odors, dust, mists, gases, or poor ventilation Employee Acknowledgement: The above information on this description has been designed to indicate the general nature and level of work performed at this client's location. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of successfully passing a background check and required drug testing. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

Key Responsibilities include: * Set up all hand tools readily accessible to the job being performed. * Review work order packet for job to verify correct product is to be produced. * Assure Log Sheets are correct for the product to be produced. * Coordinate with the Gage Lab for proper gages to measure product. * Assure gages are mastered and set as required before production starts, as well as during production operation as required. * Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer. * Identify all rejected product on Log Sheet and describe reason. * Identify all rejected physical product as per instructions and alert operator. * Assure all First and Last Article inspection is conducted as required. * Alert operator and Foreman if cause of rejection persists and participates in resolving of reason for rejection. * Assure that material for order is correct as described on the work order. * Alert Foreman and Gage Lab of any concerns regarding performance of gaging or measurement instruments. * Quality minded individual with a dedication to superior products. * Follow all applicable work instructions, specifications and requirements. * Assist in training of inexperienced inspectors. * Follow all Company Rules, Procedures and Policies. * Follow all Company Safety Rules. * Any other duties as assigned by Foreman or Manager. Requirements * High School education or equivalent, required. * Three (3) years previous experience in threading quality control, FVI experience is a plus. * Ability to read, write and speak English. * Working knowledge of blueprint reading, shop math, geometry, trigonometry, and non-destructive testing. * Ability to understand and execute instructions well.

We are seeking an experienced QC Representative to join our team in east Houston. The QC Representative reports to the Production Supervisor of their respective warehouse and inspects value-added finished products to ensure the product meets all the customer specifications. Responsibilities: Inspects products to ensure that they meet company and customer quality standards Ensures products meet customer expectations on company objectives Rejects all products and materials that fail to meet quality expectations Completes nonconformance reports when a product does not meet customer quality standards Completes quality reports to document compliance or errors of product inspected Communicates the results of inspections and puts forward corrective suggestions Labels parts as specified by the customer and company quality system Palletizes and/or bundles finished products for shipment to customers Reviews shipments and accompanying documents for quality and accuracy Transports and/or loads finished products (manually and/or using forklifts and overhead cranes) Additional duties as assigned including but not limited to: palletizing, deburring Qualifications: High School Diploma, GED, or equivalent 2+ years of related experience Strong organizational skills and attention to detail Ability to read and understand company and customer drawings Strong math aptitude and ability to accurately utilize measuring instruments such as measuring tape and caliper Extensive product and industry knowledge (carbon steel plate, burning, rolling, and beveling) preferred Professional communication and interpersonal skills Physical Requirements: Ability to lift up to 50 lbs independently on a routine basis and handle materials safely as part of daily job duties. Ability to stand for extended periods and maintain safe body positioning while performing tasks and moving through the work area, including walking on concrete floors and uneven surfaces. Frequent squatting, bending, stooping, reaching, pushing, pulling, and lifting, requiring full-body mobility, balance, and upper- and lower-body strength to perform work safely. Manual agility to operate tools safely and effectively, with regular use of arms, shoulders, and back for lifting, reaching, and positioning tasks. Ability to work safely in a warehouse environment with exposure to noise, dust, moving equipment, and varying temperatures. Ability to demonstrate adequate visual and auditory acuity to safely perform assigned tasks, including but not limited to: identifying potential hazards, reading and/or recording measurements, inspecting materials, and responding promptly to verbal instructions, alarms or hand signals in the work environment.

Full-time Description Job Title: Quality Control Inspector III Classification: Full-time, Hourly Non-Exempt Reports To: Quality & Safety Manager, Surface Technologies US ABOUT THE COMPANY: Kymera International: Kymera International is a leading global producer of specialty metal powders, pastes, and granules, catering to industries such as aerospace, defense, automotive, and electronics. Our mission is to drive innovation while adhering to the highest standards of sustainability, operational excellence, and ethical business practices. We are committed to continuous improvement and regulatory compliance on a global scale. Job Overview The Quality Control Inspector III is a senior-level role responsible for leading quality inspections, ensuring compliance with regulatory standards, driving process improvements, and mentoring junior inspectors. This role has significant responsibility for auditing, documentation, and quality assurance across the manufacturing process. Responsibilities • Lead visual and dimensional inspections of mechanical parts, machined components, and thermal spray coatings to ensure full compliance with engineering, customer, and regulatory specifications. • Utilize advanced precision measurement tools including calipers, micrometers, bore gauges, depth gauges, height gauges, dial indicators, surface profile gauges, surface roughness testers, and coating thickness gauges. • Verify dimensions, tolerances, surface profiles, and coating thicknesses per drawings, specifications, and customer requirements. • Conduct root cause investigations, support troubleshooting of coating or machining defects, and drive corrective and preventive actions. • Maintain accurate inspection records, nonconformance reports, corrective actions, and full traceability documentation. • Serve as a primary liaison and support internal and external audits, including ISO 9001, AS9100, and safety inspections. • Verify calibration status, proper use, and handling of all inspection and measurement equipment. • Support FOD prevention, process control, and continuous improvement initiatives. • Review and interpret complex engineering drawings, specifications, and quality plans. • Prepare comprehensive reports on inspection results, trends, quality risks, and corrective actions for management. • Provide training, mentoring, and guidance to Inspectors I and II and other production personnel on inspection techniques and quality expectations. • Collaborate with engineers, machinists, production teams, and suppliers to resolve complex quality issues. • Follow all facility and OSHA safety requirements related to machining operations and thermal spray processes, including PPE, hazard communication, and equipment safety. • Report unsafe conditions, near misses, and potential risks immediately. Requirements Required Skills and Abilities • Expert proficiency with mechanical and precision inspection tools and techniques. • Advanced blueprint and technical drawing interpretation skills. • Strong analytical, problem-solving, and documentation skills. • Experience supporting audits, performing root cause analysis, and driving corrective actions. • Ability to lead quality initiatives and provide mentorship to team members. • Strong collaboration and communication skills with cross-functional teams. Education and Experience • High school diploma required; associate degree in machining, engineering, or related field preferred. • Minimum 5 years of experience in quality control within a machine shop, repair facility, or manufacturing environment. • Demonstrated proficiency with precision measurement tools, including calipers, micrometers, bore gauges, surface profile gauges, and coating thickness gauges. • Strong working knowledge of ISO 9001:2015 and AS9100 standards. • Thermal spray coatings experience strongly preferred. • Demonstrated leadership experience in mentoring or training quality team members. • Ability to read and interpret engineering drawings, specifications, and quality requirements. • Ability to work independently, lead by example, and communicate effectively in written and verbal formats. • Legally eligible for employment in the United States; must meet US person requirements where applicable. • Ability to pass required background check, drug screen, and health screening. • Possession of a valid driver's license and passport and ability to travel as required. Physical Requirements • Ability to stand, walk, and perform repetitive manual tasks for extended periods. • Strength to lift, carry, push, or pull up to 50 pounds unassisted, repeatedly throughout a shift. • Ability to perform physical tasks, including bending, kneeling, crouching, reaching overhead, and climbing ladders or stairs, as needed. • Capability to pass a respiratory medical evaluation, including hearing and vision exams, and meet all necessary physical qualifications. • Ability to wear and work comfortably in required personal protective equipment (PPE), including gloves and steel-toe boots, for prolonged periods. • Adaptability to work in diverse environments, such as high temperatures, confined spaces, and areas with potential exposure to dust, fumes, and noise. • Coordination and manual dexterity to safely operate machinery, tools, and equipment while maintaining focus on ergonomics and safety. When requested by employees, and when possible, reasonable accommodation may be provided to help individuals with disabilities perform their essential job functions. Kymera is an Equal Opportunity Employer, encouraging diversity in the workplace. EOE: race/color/religion/sex/sexual orientation/gender identity/national origin/disability.

A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: Setup all hand tools readily accessible to the job being performed Review work order packet for job to verify correct product is to be produced Assure Log Sheets are correct for the product to be produced Coordinate with the Gage Lab for proper gages to measure product Assure gages are mastered and set as required before production starts, as well as during production operation as required Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer Identify all rejected product on Digital Log Sheet and describe reason Identify all rejected physical product as per instructions and alert operator Assure all First and Last Article inspection is conducted as required Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection Assure that material for order is correct as described on the work order Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments Quality minded individual with a dedication to superior products Follow all applicable work instructions, specifications, and requirements Assist in training of inexperienced inspectors Follow all Company Rules, Procedures and Policies Follow all Company Safety Rules Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: 1 year experience as production operator/or previous experience as QC inspector in previous company Working knowledge of blueprint reading and basic math. Must be fluent in English, with the ability to read, write, and communicate effectively. Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

The Quality Control Shop Inspector is responsible for ensuring that products and services meet established Everllence specifications and Industry standards such as API. This role involves active monitoring, policy implementation, audit preparation, and continuous improvement initiatives to enhance operational quality and compliance. Key Job Responsibilities: Evaluate mechanical systems and components for adherence to quality standards and regulatory compliance. Perform rigorous testing and assessment of mechanical parts to ensure optimal performance and reliability. Prepare comprehensive inspection reports detailing findings and recommendations for improvements. Collaborate effectively with engineers and production teams to troubleshoot and resolve technical issues. Advise on corrective measures to address and rectify quality concerns and enhance system performance. Ensure strict adherence to internal and external standards through meticulous inspection practices. Maintain precise records of inspections and tests to support quality assurance and traceability. Utilize advanced precision measurement tools and equipment to ensure accurate assessments. Detect and analyze defects and deviations from specifications to uphold product quality. Contribute to continuous improvement initiatives by identifying opportunities for process enhancements. Mentor and train junior inspectors, sharing expertise and fostering professional development. Stay abreast of industry trends and best practices to apply cutting-edge knowledge in inspections. Assist in developing and refining inspection procedures to improve efficiency and effectiveness. Interpret and review technical drawings and specifications to ensure accurate inspections. Ensure proper calibration and maintenance of inspection tools and equipment to guarantee reliable results. Oversee the lessons learned process, documenting insights and improvements for future reference. Manage and document HSEQ shop intent processes and procedures to ensure compliance and safety. Fulfill additional responsibilities as assigned by Everllence Management to support organizational goals. Education: Bachelor's degree or ASQ and/or equivalent experience in a related role. Demonstrating strong technical expertise, organizational abilities, and excellent written communication skills. Experience/Qualifications/Skills: Minimum five (3) to seven (5) years experience in quality control and/or operations. ASQ Quality Inspector Certification or equivalent is highly preferred. Experience as an ISO Internal Auditor is preferred, with a strong understanding of ISO standards (9001, 14001, and 45001). Experience in Non-Destructive Evaluation (NDE) coordination and testing is advantageous. Demonstrated expertise in data analysis and statistical analysis, with the ability to interpret and utilize data effectively. Desired Good communication skills, capable of engaging professionally and effectively across all organizational levels and in multinational environments. Desired Proficiency in root cause analysis techniques, such as the 5 Whys or Fishbone Diagram, to identify and resolve issues efficiently. Desired Experienced in quality inspection, lean improvement methodologies, and adherence to industry-specific quality standards. Proficient in Microsoft Office Suite, including Excel, and other quality control applications. In-depth knowledge of QC metrology tools, concepts, and methodologies for precise quality assessments. Strong understanding of relevant regulatory requirements and their application within the quality control process.

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: * Micrometers * Calipers * Pin/Plug Gages * Ring Gages * Go/No Go Gages * Height Gages * Profile Projectors * Profilometers * Surface Plates * Reading and interpretation of engineering drawings and specifications. * Computer skills, including familiarity with Microsoft Word and Excel. * Strong communication skills, both verbal and written. * Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. * Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. **Essential Duties and Responsibilities** + Conduct QC inspections and audits on contract requirements, and other services performed. + Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. + Checks randomly selected samples, and verifies accuracy of equipment or process. + Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. + Schedule inspection activities. **Knowledge, Experience and Skill Requirements** + Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. + Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. + ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards + Knowledge of recognized and generally accepted good engineering practice regulations and codes. + Excellent analytical and computer skills, specifically in MS Office Suite. + Strong written and oral communication and presentation skills. + Strong teamwork and interpersonal skills **Work Experience** + Up to 2 years of experience of Quality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide. **Education, Licenses and Certification Required:** + High School Diploma + OSHA Certification _This job description is subject to change by the employer as the needs of the employer and requirements of the job change._ J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

Were seeking a detail-oriented Quality Control Inspector to ensure that all manufactured pipe products meet strict quality and safety standards. This role is essential to maintaining compliance and delivering reliable products in a high-volume industrial setting. ️ Responsibilities: Inspect pipe and metal components for defects, dimensional accuracy, and compliance with specifications Conduct visual and physical inspections using calipers, micrometers, and other measuring tools Review blueprints and technical drawings to verify product conformity Document inspection results and maintain accurate records of quality checks Collaborate with production teams to identify and correct quality issues Perform pressure tests, ultrasonic tests, and other non-destructive testing methods Ensure adherence to industry standards and safety regulations Support continuous improvement initiatives and report recurring issues Requirements: Previous experience in industrial quality control, preferably in pipe or metal fabrication Familiarity with inspection tools and techniques Ability to read and interpret technical drawings and specifications Strong attention to detail and organizational skills Basic computer skills for data entry and reporting Must be dependable and able to work in a fast-paced environment Schedule: Monday -Friday 6AM -4PM Sat as needed Package Details

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. **Primary Job Functions:** + Conduct QC inspections and audits on contract requirements, and other services performed. + Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. + Checks randomly selected samples and verifies accuracy of equipment or process. + Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. + Schedule inspection activities. **Education, Experience and Certification:** **Required: High School Diploma or equivalent** **Required: 2 years of experience with q** **uality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide.** **Required: OSHA Certification** **Knowledge, Skills, and Abilities:** + Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. + - Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. + - ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards + - Knowledge of recognized and generally accepted good engineering practice regulations and codes. + Excellent analytical and computer skills, specifically in MS Office Suite. + Strong written and oral communication and presentation skills. + Strong teamwork and interpersonal skills **Financial Responsibilities:** Determine if the role has the authority over budget or revenue. If so, you must describe in what manner in the description box. **Disclaimer:** CBRE Government & Defense Services are thrilled at the opportunity for you to apply for one of our roles. The base salary range for this position is $40,000-$60,000. This position may also be eligible for a wide range of competitive benefits that can include but are not limited to medical, well-being, financial planning and short-term benefits. This description is not intended to be an "all inclusive" list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE'S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

We're looking for a highly motivated and self-directed QC Inspector. Responsible for ensuring that the product is within quality standards and specifications. This includes, but is not limited to, maintaining quality and safety standards; visual inspections measurements and functional testing of the product; recording data/test results to validate conformance; and assisting with quality related reports, reviews, and audits as needed. QC Inspector Responsibilities: Performs inspections of Induction Bends, Ductile Iron (DI), Carbon, Alloy Stainless Steel and Saw pipes and Tubes, finished company products according to well defined criteria and specifications. Collect all the required instruments for inspection from the QC Lab. Uses measuring equipment such as calipers, micrometers, gages, optical inspection and computerized inspection devices as needed. Rejects and returns nonconforming materials and/or products that do not meet applicable specifications and requirements. Documents inspection results by completing applicable inspection (red tagging) reports and logs. Maintains manufacturing and inspection related documentation. Supports the quality department with reviews, reports, and audits as needed. Participates in quality control/assurance related activities. Preforming in-process inspections. (pipe, fittings, flanges, valves, tubing, structural steel) Participates in performance improvement activities, utilizes resources efficiently and effectively takes responsibility for own learning needs. Collect all the required instruments for inspection from the QC Lab. Fills out inspection results and test results into ERP Software. Qualifications: 6+months of relevant work experience. Basic Math Skills Ability to communicate effectively (verbal and written) Basic computer skills including, Microsoft, Excel and Word. Maintain good housekeeping / follows safety measures. Bilingual (Spanish & English) Valid DL or ID Yard/Shop Environment; must be able to work in all-weather elements. Must be able to lift up to 55lbs.