Quality control inspector jobs in Greeley, CO

Full-time Description A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times). Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Estimated application closing date: 10/31/25 Requirements Qualifications Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Powerplant license. Experience Requirements: Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Three years business/corporate aircraft maintenance experience Other Requirements: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ideal Candidate Will Possess the Following Skills: Attention to detail. Sincere desire to assist others. Able to develop a friendly rapport. Persistence in the face of obstacles. Professional in appearance and mannerisms. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Salary Description $34-$45/hr DOE

Description The Quality Inspector role offers the opportunity to ensure excellence across manufacturing and inspection processes, supporting compliance, quality standards, and customer specifications. This position plays a key role in delivering high-quality products and services while collaborating with Engineering, Project Management, Procurement, and Manufacturing teams. Quality Inspectors drive continuous improvement, identify non-conformances, and help create a culture of safety, accountability, and operational excellence. This role provides hands-on experience with inspection tools, blueprints, and technical drawings, with increasing responsibility based on experience level. It offers the chance to mentor and develop team members, influence process improvements, and contribute directly to the success and efficiency of manufacturing operations. RK Company Overview As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services. Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collaboration. Our exclusive building methodologies, accredited safety standards and professional execution allow us to turn our customers' greatest concepts into reality. The Quality Inspector will be responsible for ensuring that all manufacturing and inspection activities align with established quality standards, process documentation, and customer specifications. This role plays a key part in cross-functional teams including Engineering, Project Management, Procurement, and Manufacturing teams. The Quality Inspector upholds organizational performance by driving compliance, identifying non-conformances, and contributing to continuous improvement initiatives. Role Responsibilities Provide overall supervision for assigned project processes, including achieving performance metrics for safety, quality, delivery, and productivity. Drive the application of Lean Manufacturing tools and concepts to achieve measurable and sustainable improvements for assigned project processes. Train, mentor, and grow production team members to build a high performing and engaged workforce. Supervise manufacturing personnel, ensuring alignment, engagement, development, and retention of talent. Promote a culture of safety, accountability, continuous improvement, and operational excellence consistent with RK Mission Critical values. Identify opportunities for process efficiency and waste reduction. Accountable for the supervision of assigned project processes, including adherence to safety requirements, and standard work instructions. Coordinate with the Production Manager to provide tactical input on manufacturing support and execution. Participate in the development and implementation of manufacturing processes, including hazard analysis, safety procedures, and team member skill assessments. Perform these and other comparable related duties as instructed by the management team. Qualifications Quality Inspector-1: Includes All of the above plus: High school diploma or GED required; additional vocational or technical training preferred. 2+ years of related experience, preferably in a manufacturing or construction environment. Receives direct supervision in performing technical responsibilities. Familiar with basic inspection tools and techniques. Ability to follow detailed instructions and work in compliance with standard procedures. Understands acceptance criteria and is aware of internal and external quality expectations. Actively supports team goals and production timelines. Displays judgment and initiative in resolving issues and making recommendations. Willingness to contribute to continuous improvement efforts. Proficient in Microsoft Office 365 and capable of navigating ERP systems. Brings energy to a team under the general supervision of an experienced professional or manager. Quality Inspector-2: Includes All of the above plus: Associate degree or equivalent combination of education and experience. 4+ years of quality experience in manufacturing or construction, with increasing responsibility. Reads and interprets blueprints, diagrams, technical drawings, and models independently. Able to perform majority of installer tasks independently while meeting quality and delivery expectations. Strong understanding of industry standards such as NFPA 70 (NEC), NECA, and NEMA. Experience managing non-conformances and supporting corrective/preventive action processes. Effective communicator with strong documentation and reporting skills. Strong attention to detail and commitment to quality. Able to design and deliver basic training on inspection protocols or tools. Demonstrates initiative, problem-solving ability, and independent judgment in evaluating quality issues. Effectively balances workload while consistently meeting deadlines and shifting demands. Proactively collaborates with team members to meet production goals. Understands continuous improvement initiatives and is willing and able to make contributions. Quality Inspector-3 (Exempt): Includes All of the above plus: Senior-level Inspector responsible for complex installation requirements, troubleshooting, and team leadership. 6+ years of quality experience in manufacturing or construction, with increasing responsibility. Demonstrated ability to independently perform complex inspections and resolve quality issues. Proven experience identifying process gaps and suggesting effective improvements. Working knowledge of ISO 9001 principles and quality management systems. Excellent problem-solving skills with a proven ability to collaborate with engineering, project management, and production teams to effectively resolve complex related challenges and plan upcoming projects. Reads and interprets advanced blueprints and manages job requirements independently. Leads, trains, mentors, develops, and drives a quality team. Demonstrates deep understanding of methods, tools, standards, and quality assurance. Actively supports lean manufacturing principles and continuous improvement initiatives. Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch for extended periods. Ability to lift, move, and/or carry 50 lbs. Comply with all company policies and procedures. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis. RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

SummaryPerform product Quality Inspection and Release activities to meet operational needs for product manufactured at the Longmont site. Document defects and support Quality and Manufacturing teams with related defect tracking, investigation, communication, and issue resolution. Job Description: In this role you will be responsible for Product Release & Inspection requirements to coincide with schedules. You will document defects and assist with tracking and trending while working with Manufacturing teams to investigate causes and implement preventive measures. May provide back up support to operational functions on an as needed basis. Essential Responsibilities: Perform inspection and release of product manufactured at the Longmont facility. Support efforts to continually improve efficiency and effectiveness of our Quality Control and product release procedures. Have comfort and proven technical abilities to ensure products match drawings/prints. Contribute to the effort to maintain all documentation and quality records for product inspection and release to ensure compliance including N299 Nuclear standards. Interacts with peers, manufacturing supervisors, engineering to help resolve technical questions and potential issues. Provide input to controlled documentation related to product release and inspection, assist with maintaining daily SQDC boards. Requires some personal initiative and occasional ingenuity, planning, scheduling, organizing and prioritization of workload. May provide advice, training, & guidance to lower-level team members on projects Provide training and communication related to Manufacturing caused defects to shop teams. Document and record repeated issues, track and trend findings and collaborate with assembly supervisor trends discovered in QC of products. Qualifications/Requirements: Ability to work 1st shift (flexible start) High School diploma or equivalent At least three years of relevant experience with technical products and exposure to quality control processes. Proficient with computers including Windows and Microsoft office products (Excel is a must) Attention to detail and accuracy. Strong written and verbal communication skills with the ability to effectively collaborate with cross-functional teams. Desired Characteristics: Technical/ associate degree in technology or similar technical area. Sound decision making and problem-solving skills. Flexible and proven ability to adapt in a changing environment. Ability to multitask and work on several projects simultaneously without compromising quality. Ability to work in a team environment. Dependable and safety minded, self-motivated and easily directed. Driven to build effective working relationships with coworkers, customers, engineers, and management of all levels. Driven to process improvements and effectiveness of QC procedure and work instructions. Leadership Skills: Demonstrated ability to lead and inspire a team, providing clear direction, setting goals, and fostering a positive work environment. Analytical Thinking: Strong analytical skills to assess identify trends and make data-driven decisions for process improvement. Attention to Detail: Meticulous attention to detail to ensure accurate documentation, compliance. Time Management: Exceptional organizational skills to prioritize tasks, meet deadlines, and handle multiple projects simultaneously. Pay Transparency: The base hourly pay range for this position is $25.82 - $30.62/hr. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is currently offered at a Level 2 pay rate. However, there is potential for a higher compensation if your skills and experience align. This posting is expected to close when suitable candidate is identified. Benefits Available to You: GE employees rise to the challenge of building a world that works. In order to meet this mission, we provide varied, competitive benefits to help support our workforce: Our Culture | GE Vernova (gecareers.com) Our compensation & benefits are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements. A healthy, balanced lifestyle can mean different things to different people. We've created programs that support the way you live and work today. GE invests to provide opportunities to grow your career by providing a path for continued on-the-job learning and development. Inclusion & Diversity: At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: ************************************************** About GE Gas Power: GE Gas Power engineer's cleaner, more accessible energy that people depend on, powering growth and prosperity for people everywhere. Our leading technologies produce a third of the world's electricity thanks to our talented people, who make gas work for our customers, stakeholders and the world. Through relentless innovation and continuous partnership with our customers, we are building the energy technologies of the future and providing the cleaner, more efficient power people depend on today. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No Application Deadline: January 05, 2026For candidates applying to a U.S. based position only:*The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas.This posting is expected to remain open for at least seven days after it was posted on November 18, 2025.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date).GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Full-time Final QC Inspector We are seeking a highly skilled and detail-oriented Full-time Final QC Inspector to join our quality assurance team in Longmont, CO. The ideal candidate will have extensive experience in quality control inspection, with a focus on electronic assemblies and cable harnesses. This position requires proficiency in IPC-A-610 and IPC/WHMA-A-620 standards, as well as a strong background in quality inspection techniques. Shift: Monday - Thursday 7 am- 4:30 pm, Fridays 7 am -12 pm OT Schedule: Monday- Thursday, 6 am- 5:30 pm, Friday 6 am- 2 pm Pay: $21-25/hr (DOE) Key Responsibilities Perform final quality control inspections on electronic assemblies, printed circuit boards (PCBs), and cable harnesses to ensure compliance with IPC standards and customer specifications Utilize visual inspection techniques and measurement tools to identify defects, non-conformities, and quality issues Conduct thorough examinations of products at various stages of the manufacturing process Verify that all components and materials meet required specifications and quality standards Document inspection results, maintain accurate records, and prepare detailed reports Collaborate with production teams to address quality concerns and implement corrective actions Ensure compliance with company policies, industry standards, and regulatory requirements Communicate effectively with cross-functional teams Qualifications 2+ years of experience in quality control inspection, preferably in the aerospace industry IPC-A-610 Certification preferred IPC/WHMA-A-620 Certification preferred Proficiency in quality inspection techniques and methodologies Strong attention to detail and ability to identify subtle defects and non-conformities Excellent written and verbal communication skills Ability to read and interpret technical drawings, schematics, and specifications Proficiency in using measurement tools such as calipers, micrometers, and microscopes Familiarity with industry standards and regulations (e.g., ISO 9001, AS9100) Strong problem-solving and analytical skills Ability to work independently and as part of a team Proficiency in Microsoft Office suite (Word, Excel, PowerPoint) Call Hannah at 720-716-5732 to learn more! #INDHE

Job Description About Us: James Fisher Technologies (JFT) is a reputable provider of remote solutions, specialty engineering, and technical services for applications within hazardous environments. In other words, we get things done for the nuclear industry. Our talented team tackles one-of-a-kind problems to provide our customers with highly engineered and proven solutions. Our goal is to recruit and retain the finest staff. Everyone at JFT has the chance to forge their career in an environment that values initiative, persistence, respect, curiosity, and passion. JFT is growing and looking for a Sr. QC Inspector, CWI preferred, to join our team in our Loveland, CO office. The anticipated closing date for this posting is 12/31/25 and applications will be reviewed on a rolling basis. Function: The Sr. QC Inspector will utilize their inspection experience to ensure the products coming from external and internal vendors are compliant with the technical requirements specified. This position is responsible for verifying requirements from purchase orders are satisfied, all needed and substantiating documentation is created and recorded, and all parts are released to continue down through production. Responsibilities Include: Gather needed certifications and documents required for our ISO 9001:2015, ASME, NQA-1 and 10CFR50 Appendix B quality programs. Review and approve quality paperwork and perform timely in-process inspections. Measure precision machined components and fabrications against drawing requirements. Measure and inspect components coming from vendors for conformance to engineering drawings, schematics, and specifications; process standards and specifications; and production or process plans. Utilize digital CMM equipment and laser trackers, as well as calibrated hand tools to perform measurements. Accept or reject material and identify and document anomalies and non-conformances. Create and maintain inspection records utilizing many different electronic information systems. Qualifications and Experience: Experience with mechanical inspection, programming digital coordinate measurement machines, measurement using hand inspection tools and troubleshooting sources of error are critical to the position. At least 3 years of experience working within an ISO 9001 quality management system in a manufacturing and engineering environment. QA experience in the application of ASME, NQA-1 and/or 10CFR50 Appendix B, as well as audit support. NDT experience including magnetic particle, liquid penetrant or leak testing (MT, PT, LT). ASNT qualifications and AWS CWI certification is a plus. Customer specification and drawing review, and quality document submittal preparation experience is desired. Typical Working Conditions: The QC Inspector works in a fabrication shop as well as an office environment. The fabrication shop may involve exposure to heavy machinery, welding operations, and metal or plastic fabrication processes. The role requires strict adherence to safety protocols, including the use of personal protective equipment (PPE). Occasional travel may be required to vendor locations to perform inspections or audits. JFT has implemented a 9/80 work schedule, and the office is closed every other Friday. Physical Requirements: This position requires the ability to stand for long periods, walk throughout the shop floor, and move between workstations. Frequent bending, kneeling, and crouching may be required during inspections. May involve lifting and carrying objects, typically up to 50 pounds, as well as the ability to use hand tools and inspection equipment that may require physical strength. Manual dexterity is essential for handling small parts, tools, and precision instruments. Vision, including color perception, depth perception, and the ability to focus on small details is required. The ability to hear instructions, alarms, or equipment sounds that indicate potential issues is necessary. This position requires sustained concentration to ensure detailed inspections and accurate measurements. Must be able to work on a computer, use standard office equipment, and be able to communicate effectively in writing and verbally with team members, customers and vendors. Access to Restricted Information: This role requires routine access to restricted information, including but not limited to Export Controlled Information (ECI), Unclassified Controlled Nuclear Information (UCNI), Controlled Unclassified Information (CUI), Department of Energy Official Use Only (DOE OUO); and/or ITAR-controlled technical data. As required by applicable federal laws and regulations, candidates must be U.S. citizens or lawful permanent residents and all offers of employment will be contingent on satisfying applicable licensing, training, and other requirements. James Fisher Technologies does not sponsor employment visas. James Fisher Technologies, LLC is an Equal Opportunity Employer. JFT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. A criminal history background check will be obtained pre-employment.

Perform in-process inspection on product being processed through the work cell, specifically at SMT, Wave and Selective Soldering operations. Essential Duties and Responsibilities: * Adhere to all ESD requirements and Board Handling. * Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). * Verify process compliance to document control process and procedures. * Examine product to verify conformance to workmanship standards. * Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials through the designated ERP system. * Inspect product being processed through work cell according to specific in-process inspector training and procedure, along with IPC-A-610 & J-STD-001 workmanship standards. * Documents inspection results by completing reports and logs as applicable. * Resolve quality-related issues in a timely matter. * Approves finished material and/or product by confirming specifications, conducting visual measurement tests, returning products for re-work and confirming re-work. * Responsible for stopping processes, with communication to Production Supervisor, lead and/or engineering, to control manufacture of non-conforming assemblies. * Support and follow all ISO standards related to various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. * Maintains safe and healthy work environment by following standards and procedures, and complying with legal regulations. * Perform all other duties, as assigned.

PCB Manufacturing | QC Inspector Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Be able to complete AS 9102 Reports Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of Quality Control experience Knowledge of AS 9100 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties

PCB Manufacturing | QC Inspector Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Be able to complete AS 9102 Reports Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of Quality Control experience Knowledge of AS 9100 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC).Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB, AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Visit us!********************* Salary Description $18.00

Job Details $27.00 - $30.00 HourlyDescription Quality Inspector - Sheet Metal Fabrication Type: Full-Time We're looking for an experienced Quality Inspector to join our sheet metal fabrication team. This role involves performing First Article Inspections (FAI) and Production Inspections, using precision measurement tools to ensure parts meet specifications. Responsibilities: Conduct FAI and complete documentation of customer requirements following internal procedures. Inspect sheet metal parts using calipers, micrometers, height gauges, and other tools. Read and interpret blueprints. Record inspection results and report non-conformances. Basic familiarity with user-based calibration of measurement tools. Requirements: 1+ years in quality inspection within sheet metal fabrication processes. Strong attention to detail and ability to work independently. Proficient with various measurement tools. Experience using Microsoft Excel and Word. Considered a plus: ISO/AS9100 familiarity Basic CMM operation Knowledge of GD\&T standards.

About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities * Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) * Verify part conformance to engineering drawings, tolerances, and work instructions * Read and interpret blueprints, GD&T, and manufacturing specifications * Document inspection results accurately in quality records, travelers, and digital systems * Identify nonconformances * Conduct surface finish, weld quality and dimensional inspections as required * Collaborate with production operators and supervisors to resolve quality issues * Maintain a clean, organized, and safe work environment * Support continuous improvement initiatives Qualifications * Required: * 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing * Ability to read and interpret blueprints * Proficiency with standard inspection tools * Strong attention to detail and accuracy * Ability to work independently on 2nd shift * Basic computer skills for data entry and documentation * Preferred: * Experience with FAIRs & ISO 9001 environments * Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements * Ability to stand for extended periods * Ability to lift up to 40 lbs. * Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) Verify part conformance to engineering drawings, tolerances, and work instructions Read and interpret blueprints, GD&T, and manufacturing specifications Document inspection results accurately in quality records, travelers, and digital systems Identify nonconformances Conduct surface finish, weld quality and dimensional inspections as required Collaborate with production operators and supervisors to resolve quality issues Maintain a clean, organized, and safe work environment Support continuous improvement initiatives Qualifications Required: 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing Ability to read and interpret blueprints Proficiency with standard inspection tools Strong attention to detail and accuracy Ability to work independently on 2nd shift Basic computer skills for data entry and documentation Preferred: Experience with FAIRs & ISO 9001 environments Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements Ability to stand for extended periods Ability to lift up to 40 lbs. Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

JOB DETAILS Base Pay: $24 per hour Benefits Start Day 1 80 Hours Paid Time Off On Demand Pay - easy access to your pay when you need it DUTIES AND RESPONSIBILITIES We are currently seeking a Quality Technician to help us ensure that non-conforming products do not continue through the production process and are not distributed to customers. In this role, you will conduct routine quality inspections of raw materials and finished goods throughout production, including in-process and final inspections. During these inspections, Quick Problem-Solving, and Root Cause Analysis methods will be performed to support the manufacturing process and ensure delivery of quality material. * Drive quality at the source by providing work areas with the quality at the source necessities * Outline critical to quality process steps and understand capabilities, controls, and necessary equipment and tools to adequately perform job functions * Create work instructions and visual aids to support lines * Embody a no defect forward culture * Supports supervisor and operations with line calls * Maintain quality at the source through general quality controls and inspections * Audit the quality of in-coming materials, work in progress materials, and finished product in accordance with standards * Perform all required ASTM quality control testing on aggregate and concrete products including, but not limited to, field-testing (slump, air content, unit weight, yield, cylinders, etc.), gradations on production aggregates, and lab work (compression testing and scheduling) * Ensure test equipment is calibrated and working correctly and lab area is organized * Maintain accurate and up-to-date documentation of testing completed with results * Report quality nonconformances to the supervisor immediately * Participate with internal and external team members, vendors, and Regional Quality Manager in resolving quality problems by investigating complaints, collecting necessary data, and solving complaint utilizing established Cornerstone Building Brands Quality Problem-Solving methodology * Analyze and interpret technical information and effectively present information to sales, project managers, operations, and other employees within the organization * Support existing product specifications and new product request by documenting customer expectations and trialed product through detailed process steps, mix designs, and recipes Qualifications * English/Spanish Bilingual * High school diploma or GED, Associate's degree preferred * Experience as an Inspection or quality technician * Experience in manufacturing environments that are fast-paced * The employee must occasionally lift and/or move anywhere up to 75 lbs Skills & Competencies * Working computer knowledge; including applicable Microsoft software * Understanding of mathematical concepts such as ability to add, subtract, multiple and divide in all units of measure, using whole numbers, common fractions, and decimals * Working with a sense of urgency * Ability to work alone with minimal supervision * Teamwork - Contributes to building a positive team spirit * Judgment - Exhibits sound and accurate judgment * Planning/Organizing - Uses time efficiently and has advanced organizational skills * Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions * Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly * Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events * Attendance/Punctuality - Is consistently at work and on time * Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals * Initiative - Asks for and offers help when needed * Innovation - Generates suggestions for improving work Other * The employee is frequently required to sit, climb, and use hands to signal and handle equipment * The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception Additional Information Site Address: 6300 E 44th Ave, Denver, CO 80216 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. * Full-time is defined as regularly working 30+ hours per week. Union programs may vary depending on the collective bargaining agreement All your information will be kept confidential according to EEO guidelines. The US pay for this full-time position is $23.81 per hour + medical, dental, vision benefits starting day 1 + 401k and PTO. (Full-time is defined as regularly working 30+ hours per week. Union programs may vary depending on the collective bargaining agreement.) Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. * Full-time is defined as regularly working 30+ hours per week. Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or *******************************. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or *******************************. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Duties and Responsibilities: Work effectively with the Quality, Operations, and R&D departments to perform all work accurately, with a sense of urgency and a positive attitude. Activities include the following: In-Process and Final Device Inspection and Test : Support Manufacturing as the QC inspector for clean-room & packaging inspection activities. Perform and document in-process and final inspection/test of devices and sub-assemblies. Provide inspection/test assistance to R&D, Operations and Quality Engineering in support of design and process verification/validation activities. Receiving Inspection and Test : Perform and document receiving inspection/test of device components & raw materials in accordance with drawings/specifications. Maintain accurate & timely records of inspection activities and recording such activities in the QC Receiving Log. Non-Conforming Materials : Identify, segregate and quarantine non-conforming materials resulting from inspection activities. Initiate NCRs and notify the workstream owner in a timely manner. Execute and record disposition activities in accordance with approved NCRs. Microbiological Monitoring : Participates in periodic microbiological and particulate testing of the cleanroom and products as required. Returned Goods Authorization : Perform timely inspections and maintain accurate records of all returned TriSalus products through the RGA process. Correctly dispositions returned product as defined in approved procedures. Quality Record maintenance : Receive, verify, scan and physically file Quality Records in an organized manner as needed. Shipping QC : Verify TriSalus products and associated paperwork are accurate and complete prior to shipment. Audit Assistance : Help retrieve, review, organize and re-file documentation during all TriSalus site audit activities (internal, FDA, ISO registrar). GP Dynamics : Transfer released materials in the ERP software for material management as needed. Training Record support : Enter complete training/certification records into the eQMS as needed. General : Perform other quality inspection, test or administration activities as assigned. Qualifications Education & Certifications: High School diploma. Advanced education or certifications a plus. Work Experience: 2+ years of Quality Control / Inspection experience in a medical device or similar technical product manufacturing company. Experience working with sterile disposable products in a cleanroom environment a plus. Knowledge, Skills & Abilities: Able to read and interpret engineering drawings, specifications and detailed technical documents. Able to read and follow quality procedures and detailed work instructions (QLPs/OPs). Able to perform component and product inspection/testing using tools such as microscopes, calipers, micrometers, pin gauges, depth gauges, pull force test systems and vision measuring systems. (Sufficient knowledge to select and use the correct measurement tool for the required inspection accuracy. Able to accurately document results of inspections using good documentation practices. Able to understand and apply inspection sampling plans, such as C=0 or ANSI Z1.4. Able to utilize basic math skills. Able to use MS Word and MS Excel. Must possess strong attention to detail. Possess good communication skills and able to interact with peers in a professional manner. Possess knowledge and application of US and international standards for quality management (FDA 21 CFR 820, ISO 13485). Demonstrates excellent critical thinking skills. Ability to adapt to and rapidly learn new processes. Strong verbal and written communication skills and confidence in making inspection related decisions. Participates as a member of cross functional technical teams to support process improvements, special projects and investigations as needed. Approaches work tasks with a positive attitude and seeks feedback on performance to continually improve. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Must be able to lift and carry up to 30 lbs. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards.

ABOUT THE COMPANY Our founders, food industry veterans Mike and Tisha, knew that food wasn't what it used to be, so they wanted to make it better - by creating a new kind of farm. A farm that grows up to 300 times more food than an ordinary farm on a smaller footprint, without a drop of pesticides. Farms powered with 100% renewable energy, growing with 95% less water and delivering food within 48 hours for longer freshness for our customers and less food waste. 80 Acres Farms is a vertical farming leader, operating commercial farms in Ohio, Kentucky, and soon-to-be Georgia in addition to research and development farms in Arkansas and The Hauge, Netherlands. All farms utilize state-of-the-art technology and analytics developed by the Company's subsidiary, Infinite Acres. 80 Acres Farms branded salads, microgreens, herbs, and tomatoes are available at retailers and food service distributors, including Kroger, Whole Foods, The Fresh Market, Dorothy Lane Markets, Sysco, and US Foods from Michigan to Florida. 80 Acres Farms is supported by world-class investors and partners, including General Atlantic, Siemens, Barclays, Ocado, Priva, and Signify/Philips. If you're interested in making a difference, join our team in changing how the world eats. POSITION OVERVIEW The Quality Technician is responsible for driving the 80 Acres Farms quality and food safety program across all processes at the farm. With strong knowledge of 80 Acres Farms Food Safety and Quality procedures the Quality Technician will perform process audits, product monitoring and verification checks, shelf-life evaluations and collection of food safety and quality data as applicable. The Quality Technician will be responsible for on-time identification and escalation of food safety and quality issues at the farm level, assist in food safety and quality training, support implementation of corrective actions, conduct and participate in root cause analysis and continuous improvement projects. This is a great entry level position that provides a foundation that supports growth in a Quality career path. Key responsibilities and duties: Monitor and verify compliance with food safety and quality programs and procedures on a day-to-day basis. Evaluate and document effectiveness of cleaning and sanitation of equipment prior to start-up. Verify general areas are maintained in sanitary conditions throughout operations shifts. Evaluate product adherence to specification at different stages in the process, including harvest, mixing, and packing. Collect environmental and product samples in compliance with schedule. Collect and evaluate shelf-life samples in compliance with schedule. Verify and calibrate food safety and quality metric monitoring devices such as metal detector, scales, and temperature recorders. Monitor and verify implementation of corrective actions at the farm level. Ensure farm compliance with food safety regulations. Support continuous improvement projects as needed. Qualifications: 1+ year experience with food handling or processing Familiarity of GMPs and HACCP Inquisitive and detail-oriented mind set Comfortability in computer systems and programs Degree or applicable experience in Agriculture, Food Science, Chemistry (Preferred) Schedule: Schedules are day shift; (4) 10-hour days. Saturday or Sunday availability ENVIRONMENT Repetitive motion throughout the shift Standing or walking for a long duration of time Crouching and kneeling Lifting up to 50lbs Will be exposed to 39-degree temperatures when working in the leafy packaging area BENEFITS WE OFFER YOU Health, dental, and vision insurance starting day one of employment Two weeks paid vacation One week paid health & wellness time 10 paid holidays Parental leave 401k with up to 4% Company match Annual tuition reimbursement Company-paid life insurance Short and long-term disability insurance ABOUT OUR HIRING PRACTICES Statistics show that underrepresented communities don't apply for a job unless they meet 100% of the qualifications. Don't worry if you think you can't check every box on the list; we'll provide all the on-the-job training you need. 80 Acres Farms is an equal opportunity employer. You're defined by more than just your job title, and we want you to feel comfortable bringing your true self to work. We value your talents, your traditions, your take on the world, and everything else that makes you unique. We strive to be to be a place where a diverse mix of talented people want to come, to stay, and to do their best work. 80 Acres Farms participates in E-Verify. As required by law, your employment with the Company is contingent upon you providing legal proof of your identity and authorization to work in the United States. Employment decisions are made without regard to protected characteristics. All candidates will be given the same consideration.

Lazydays RV is looking for an experienced QC Check-In with a proven track record of success to join our winning team! Why our Teammates Choose Lazydays: Paid training The Best Dealership Facilities in the Area Competitive health and wellness benefits Paid vacation (yes, we are in the recreational sales and service industry) Employee Stock Purchase Plan (ESPP) Fun work environment Growth opportunities- the growth of our teammates preserves our culture! Sponsorships in our local communities-ways for you to get involved Paid OEM Training SUMMARY: This position ensures customers feel welcomed, informed, comfortable, and secure during check in process, as well as with their purchase. Since 1976, Lazydays RV has built a reputation for providing an outstanding customer experience with exceptional service excellence and unparalleled product expertise, along with being a preferred place to rest and recharge with other RVers. By offering the top selection of RV brands from the nation's leading manufacturers, state-of-the-art service facilities, and thousands of accessories and hard-to-find parts, Lazydays RV provides everything RVers need and want. Responsibilities ESSENTIAL JOB FUNCTIONS: Inspect all incoming units, new or used, for function, missing, defect, or damage and record as per check list Report any major issues, new/used, to manager for review before releasing drivers or turning in sheet to finance on trade Meet and greet each customer and transport to delivery site for inspection Change license plate from one RV to another Understand and address or relay to advisor and/or salesperson trade customer concerns and questions, including functional issues to be addressed by technicians Attend all company required meetings Additional responsibilities as requested or required Qualifications QUALIFICATIONS and EXPERIENCE: Valid Driver's License and clean driving record to meet insurance requirements Ability to learn the systems and features inside an RV Ability to speak, read, write and comprehend English Must have excellent customer service and communication skills, both verbal and written EDUCATION: HS Diploma or equivalent

Job DescriptionDescription: ROLE AND RESPONSIBILITIES • Inspect mechanical parts fabricated internally using industry standard inspection tools • Inspect mechanical parts and components provided externally by suppliers at inspection stations. • Inspect and monitor incoming raw materials/packaging and finished goods, including paint, for specification compliance • Inspect electrical wire routing, torquing and continuity as required • Conduct electrical testing of product as required • Assist in troubleshooting non-compliant inspected parts and components • Responsible for inspection related document control and records storage • Document and record inspection results in electronic and hardcopy format • Interpret mechanical drawing dimensional features and acceptable tolerances • Maintain a “floor presence” as an “auditor of quality” throughout the manufacturing facility and process • Regularly review work instructions, travelers, and production records for continuous compliance to manufacturing requirements • Works closely with production managers and manufacturing personnel conducting quality assurance checks • Participates in regular procedure training activities in production • Provides support for quality related projects, objectives and deadlines beyond the normal job scope as required • Makes key decisions concerning product quality on their own, including pausing the line when processes do not conform to specification • Facilitates GEMBA Walks, Quality Stand-up meetings, and other public speaking activities as needed • Compiles and distributes weekly quality metrics data at the direction of the Dir of Quality QUALIFICATIONS AND EDUCATION REQUIREMENTS • A minimum of 3 years' experience as a Quality Inspector in an ISO 9001 environment is required for this position • A minimum of 3 years' electrical/electronic manufacturing experience is required • ASQ CQT certification or current pursuit of certification is highly desired • A 2-year technical or vocational certificate is highly desired • Advanced working knowledge of ISO 9001:2015 is highly desired • Knowledge of AQL acceptance sampling plans using ANSI Z1.4 is strongly desired • Knowledge of 5S +1 principles highly desired PREFERRED SKILLS • Advanced hands-on experience using common inspection tools and instruments • Highly proficiency in MS Office Suite (e.g., Excel) • Highschool math skills required • Experience inspecting SS and CRS weld joints is highly desirable • Ability to manage multiple concurrent tasks is required • Deliver results accurately and on time while utilizing a strong learning mindset • Must be capable of working independently to achieve production schedules and quality goals • Effective interpersonal skills involving the ability to work effectively, cross-functionally and cross-culturally • Excellent communication skills adaptable to all levels of the organization • Ability to communicate clearly in a proactive positive sense BENEFITS • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance PERFORMANCE BONUS - Eligible A written and / or practical skills assessment will be required of the successful applicant. Requirements:

Job Description Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Job DescriptionDescription: A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times). Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Estimated application closing date: 10/31/25 Requirements: Qualifications Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Powerplant license. Experience Requirements: Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Three years business/corporate aircraft maintenance experience Other Requirements: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ideal Candidate Will Possess the Following Skills: Attention to detail. Sincere desire to assist others. Able to develop a friendly rapport. Persistence in the face of obstacles. Professional in appearance and mannerisms. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.