Quality control inspector jobs in Hamilton, OH

Job Titles: Quality Inspector Shift time: Monday - Thursday - 2nd shift - 3:30pm - 2am Performs new and routine inspections, checks, tests and sampling procedures of standard parts. Responsible for receiving, in-process, or final inspections as required. Duties and Responsibilities Responsible for utilizing aptitude in measurement techniques, metrology, and blueprint reading and verify operators are accurately measuring and recording dimensions on IP sheets or other documentation. Perform first article and first piece approval for operators. Perform inspection duties for in-process and final inspection. Complete and review non-conformance documentation. Support quality improvement and cost savings initiatives, as required. Assist Quality Engineers, as required. Assist in other production areas, as needed. Perform other quality or document control duties, as assigned. Perform part measurement on CMM.

Our client, a global leader in the pharmaceutical manufacturing industry, is seeking a QC Analyst to join their team! - Pay: $25-30/hr ($25/hr for entry level/recent graduate) - Shift: 1st shift M-F GENERAL DESCRIPTION: The QC Analyst I performs testing of samples submitted to the laboratory in a cGMP compliant manner, as well as according to approved written procedures. The QC Analyst I may be required to write or revise SOPs, analytical procedures, or other analytical documentation at the discretion of quality control supervisory staff. KEY DUTIES: Perform testing in accordance with written procedures (i.e. USP/EP/JP grade) Documentation of laboratory activities including worksheet/notebook entries according to procedures that define laboratory documentation practices. Processing of electronic data using procedures that ensure data integrity and security. Ship samples to contract testing facilities. Entry of test results from contract laboratories Review and countersign (when necessary) logbooks, notebooks, and worksheets for the purpose of verifying compliance with written procedures, good documentation practices, data integrity and accuracy of calculations. Transcribe results onto analysis reports. Perform daily standardization and performance verifications on laboratory equipment. Comply with site-wide procedures including but not limited to change control, documentation, deviation reporting, cGMP compliance, safety, and electronic data security. Identify deviations to written procedures. Disposal of laboratory waste on an as needed basis. Identify and report unsafe conditions within the laboratory. Identify OOS results, atypical results, and atypical laboratory events requiring a laboratory investigation; perform investigative testing. SKILLS/ABILITIES: Ability to perform routine analysis, such as wet chemistry and operate basic laboratory equipment. Understands paperwork review process. Ability to follow written procedures and exhibit excellent documentation practices. Basic laboratory knowledge and skills analytical techniques in wet chemistry/chromatography Practical experience with various types of laboratory instrumentation Troubleshooting skills with analytical methodology and instrumentation. Technical writing skills Employee must be able to pass a vision exam prior to employment and annually thereafter. PERSONAL ATTRIBUTES: Proactively achieves results for the best of the organization. Willingness to learn new things. Ability to function in a small company atmosphere. Ability to cope with a rapidly changing work environment. Commitment to teamwork. Commitment to continuous improvement in all areas. Ability to focus attention to details and ensure high quality work. Ability to work safely; seek out and encourage safe practices Responsible for managing their time, organizing their workload to be efficient, and have good organizational and communication skills EDUCATION AND EXPERIENCE: Bachelors Degree in Chemistry with 0-2 years of laboratory experience. Other fields of specialty in Sciences are also acceptable provided sufficient chemistry coursework is completed. This job description is a complete list of all desired skills, but not all are required. We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Demonstrated oral and written communication skills required * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information clearly to others in writing and verbally in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, move throughout the facility, use hands, reach with hands and arms, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #3201761025 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

TempToFT Quality Inspector Rate: $18-22/hr Hours: 7am-3pm Wilmington, OH C-D Responsibilities: - Inspects raw materials, parts, component, and finished product for compliance with dimensional and performance specifications using established inspection plans. - Use handheld measuring equipment and with working knowledge of at least 1 advanced measurement system (e.g., CMMs, optical comparators). - Statistical sampling using an inspector's rule. - Read comprehend simple instructions, short correspondence, and memos. - Documents inspection observations and reports non-conformances in the computer system. - Use ERP computer system. - Operate forklifts. - Safely lift and transport up to 50 lbs. over short distances. Requirements: - High School diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience - Availability for shift work and overtime as needed - Close vision (corrected or uncorrected) with peripheral, depth perception and color vision capability - Three years of on-the-job experience - Ability to write simple correspondence - Ability to speak effectively before groups of customers or employees of organization - High school level reading, writing and comprehension proficiency - Inspector 1 math skills - Ability to read, understand, and analyze product requirements against the actual product for purposes of evaluation If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

Quality Inspector BH Job ID: 3460 SF Job Req ID: 16206 Title: Quality Inspector Shift: 1st Shift Mon-Fri 6am - 2pm Pay: $23-$27 per hour based on experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: The Quality Inspector will be responsible for inspecting materials and products, providing quality support through knowledge of inspection procedures and tools, identify deviations, work with production team members to document non-conforming materials, and communicate with teams within in a manufacturing facility. A Quality Inspector works with a team to ensure all products meet established quality standards. The ideal candidate is adaptable, a team player, a great communicator, and can meet deadlines by prioritizing multiple tasks/projects. Responsibilities: * Perform inspection of in-house production, vendor supplied parts, or final products * Interpret engineering drawings/specifications and geometric dimensioning and tolerancing (GD&T) * Identify and document defects, deviations, or non-conforming items * Operate Positive Material Identification (PMI) Gun to check materials against specifications * Ensure inspection tools and equipment are properly calibrated and maintained and report issues * Collaborate with team members to optimize workflow and achieve daily and monthly targets * Perform quality checks by established quality procedures and ISO requirements * Maintain accurate records of inspection results, quality control data, and non-conforming products. Generate reports and documentation as required Requirements: * High School Diploma or GED * 1+ year experience in Quality Control or Quality Inspector experience Core Competencies: * Teamwork, Communication, Collaboration * Efficiency, Productivity, Accuracy * Integrity, Problem Solving, Detail Oriented, Results Driven * Time Management, Strategic Thinking, Adaptability Preferences: * Ability to read and understand the bill of materials and work instructions, or technical drawings * Ability to operate precision tools such as micrometers, callipers, height and thread gauges, tape measure, level, etc. * Ability to lift a maximum of 40 lbs * Experience using CMM or other automated measurement/verification devices * Proficient computer knowledge (i.e. log on credentials, SAP, and Microsoft Outlook, Word and Excel) Travel & Work Arrangements/Requirements: * This position will be based at our site in Enon, OH no travel. Pay Range: * Starting Pay will range between $23.00 - $27.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.

Responsibilities: Conduct visual inspections for compliance and quality standards Perform part and serial number verification Record inspection data into tracking systems Follow safety and quality protocols at all times Skills and Industry Experience: 1+ years (inspection, inventory control, or quality-related roles) High school diploma or equivalent (technical degree preferred); ability to read/interpret technical drawings, part numbers, and inspection documents; basic computer/data entry skills computer/data entry skills ASQ Certified Quality Inspector (CQI) or OSHA Safety Training preferred Ability to work well in independent and group problem-solving situations Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events Flexibility in scheduling Job type: 1099 contract Project Duration: Typically 1-2 day assignments Note: This is a 1099 contract role - project duration may vary based on client needs Shift Hours: Note: As a 1099 contractor, project schedules may vary depending on site availability Ability to commute to Columbus, OH Compensation: $20.00 - $30.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Quality Control Inspector Make sure the military gets the best product available by joining our team of expert inspectors! First and second shift positions are available! FUNCTION: Inspect castings, forgings, fabrications, assemblies and machined workpieces for conformance to specifications and blueprints, using standard and precision measuring devices/instruments, formulas and shop mathematics. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints and engineering specifications to obtain product information, such as specified material, surface finish, and dimensions. Computes angles, radii, and other unspecified dimensions of workpiece. Measures dimensions, such as length, height, distance and angles using standard and precision measuring instruments such as CMMs, micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, ultrasonic equipment and profilometer. Inspects first run parts, including fabrications and assemblies. Write reports regarding inspection and testing results. Position castings, forgings or finished parts on surface plate and layout reference points and centerlines. Examine defective parts to determine cause of defect and recommend changes or modifications. REQUIRED EDUCATION/KNOWLEDGE: High school diploma or GED is required. Two years of related quality inspection based experience is preferred. Training in Statistical Process Control (SPC) data collection techniques and evaluating is preferrable. REQUIRED EXPERIENCE/SKILLS: Experience in a manufacturing environment using various standard measurement gages, preferably in aerospace or defense contracts. Proven problem-solving skills, with proven ability to establish an effective course of action. Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

At CTS, we're not just applying coatings- we're solving complex challenges for industries that demand precision, durability, and innovation. If you're someone who thrives on quality, takes pride in detail, and enjoys contributing to a high-performance team, we want to meet you. We're currently hiring Quality Control Inspectors at our Blue Ash, Ohio location. This role is essential to ensuring every part we produce meets the highest standards and exceeds customer expectations. What You'll Do Conduct final visual and dimensional inspections of completed parts, verifying that all required operations, tests, and documentation are complete. Use precision tools and equipment to take accurate measurements. Complete and sign off on routers and certificates of conformance. Maintain a strong focus on safety, quality, and continuous improvement. Support other tasks and team needs as required. Requirements Age 18 or older High School Diploma or GED Must be a U.S. Person under ITAR/EAR regulations (able to provide a U.S. Passport, Permanent Resident Card, Birth Certificate, or Naturalization Certificate) Ability to pass a background check and DOT drug screening Strong attention to detail and decision-making skills Available Shifts Weekend Shift: Friday-Sunday, 9:00 AM-9:30 PM Bonus Points If You Have 1+ year of experience in inspection, especially in aerospace, thermal spray, or coating environments D.S.Q.R. certification We believe in potential. If you're excited about this role but don't meet every requirement, we still encourage you to apply. Let's grow together. Why CTS? We offer a competitive benefits package designed to support your health, well-being, and future: Medical, dental, vision, life, short and long-term disability insurance 401(k) with company match Paid Time Off & Paid Holidays Tuition Reimbursement Employee Referral Program Company-sponsored events and celebrations About CTS CTS is a leader in advanced coating technologies. We specialize in transforming tough challenges into high-performance solutions. From R&D to manufacturing and application services, our team is dedicated to helping customers grow and succeed in a rapidly evolving world.

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.

Job Summary: Quality inspector is responsible for reviewing products and materials during manufacturing to ensure they meet quality requirements. Must be willing to work D Shift: Thursday, Friday, Saturday and Every Other Sunday, 7PM to 7AM. $2 per hour shift differential applies to this position. Job Duties: Approving or rejecting material with respect to quality standard. Discuss production results with the production team. Maintain inspection reports. Uphold company safety measures. Generate certificate of conformance or certificate of analysis. Ensure test equipment is calibrated and working correctly. Verify that production adheres to quality standards and procedures, by pulling samples to test using the appropriate methods and tools. Other duties as assigned Job Qualifications: Minimum of a High school diploma. Would prefer a degree related to quality or manufacturing. Ability to work alone with minimal supervision. Must have organizational skills with an ability to prioritize and multi-task Strong analytical and communication skills Ability to interact in a professional manner with employees. Ability to communicate effectively both verbally and in writing Working understanding of Excel and Word Transcendia is an equal opportunity employer and will consider all candidates for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

QUALITY INSPECTOR DEPARTMENT: Quality REPORTS TO: Quality Manager PURPOSE: This position is responsible to insure the quality of the customer products through competent and efficient inspection in support of manufacturing. DUTIES/RESPONSIBILITIES: Follow all Quality Department inspection procedures for first article, in-process and final inspections Support all manufacturing concerns in a timely manner Set-up gages for floor inspection Follow tag system Fill out, stamp and sign Quality Inspections Log and file quality records E2 documentation - daily time reporting Carry out all other duties as assigned REQUIREMENTS: High school diploma or equivalent or 6 months experience in a similar position The ability to read and understand prints, routers and quality plans and to communicate the information contained Must be able to use, maintain and calibrate all common measuring instruments including caliper, micrometers, height gages and bore gages Capable of following and using the tag system, completing inspection reports and filing quality records An ability to learn additional measuring systems including CMM inspection/programming and to operate computers WORK ENVIRONMENT: While performing the duties of this job, the employee may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud when on the shop floor. This position also has a role in a professional office environment which routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. HEALTH AND SAFETY: Work in compliance with the Occupational Health and Safety Act and regulations. Follow Company safety rules. Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately. Maintain a clean and safe work area. PERSONAL PROTECTION REQUIREMENTS: Use or wear the equipment, protective devices or clothing that is required to be used or worn (When applicable to work environment): Safety shoes Safety glasses Hearing protection Other types of PPE as needed

The Quality Inspector is an entry-level position responsible for performing inspections on final products, assisting with the development of weld and assembly work instructions, and supporting the administration of weld qualification tests. This role works closely with experienced quality staff, production teams, and supervisors to ensure products meet company standards and customer requirements.Key Responsibilities Inspection Perform visual and dimensional inspections of final products using basic measuring tools (tape measures, calipers, gauges). Verify that parts and assemblies meet engineering drawings, specifications, and quality standards. Record inspection results and report non-conformances to the Quality Manager or supervisor. Assist in re-inspecting corrected items to confirm they meet requirements. Work Instructions Help create and update simple weld and assembly work instructions under the guidance of senior staff. Take photos and document production steps for clarity in work instructions. Assist in organizing and maintaining work instruction files for easy access by production staff. Weld Exam Support Assist in scheduling and setting up welder qualification and requalification tests. Help maintain basic records of welder certifications. Support the Quality Manager in distributing and collecting test materials. General Quality Support Maintain cleanliness and organization in inspection and testing areas. Participate in basic quality training to develop skills in inspection techniques and standards. Support other quality-related projects as assigned. Qualifications Required: High school diploma or equivalent. Strong attention to detail and accuracy. Basic math skills and ability to use a tape measure and hand tools. Willingness to learn welding symbols, inspection methods, and quality standards. Ability to follow written and verbal instructions. Preferred (but not required): Experience in a manufacturing or fabrication environment. Familiarity with welding processes or shop drawings. Basic computer skills (Word, Excel, email). Physical Requirements Ability to stand, walk, bend, and perform inspections for extended periods. Lift and carry up to 40 lbs as needed. Work in a manufacturing environment with exposure to welding, grinding, and assembly operations. Work Environment This role will work primarily on the manufacturing floor with some office time for documentation and training. Safety equipment will be provided and must be worn when required.

Job Details PJ Ohio Mfg Facility - Mt Orab, OH Full Time $17.00 - $20.00 Hourly DayQuality Control Inspector $17-$20 pr hour paid weekly/ Retention bonus $1000/ Attendance bonus of $3 per hour on the first 40 hours worked each week paid out as $240 bi-weekly. Benefits available after 60 days following the 1st of the month, including 80 hours of Paid Time off (PTO). Quality control inspectors' tasks include running tests, keeping a record of defects, analyzing products, and overseeing procedures. Quality control inspectors may work from a variety of locations, from assembly lines to the Shipping department. This may involve long hours of standing at a time, depending on the location. This job is well suited for people with an eye for detail, who have an aptitude for math, and who have technical skills. Duties and Responsibilities Checks the quality of trailers for Big Tex and PJ Trailers by conducting tests, monitoring production processes, and identifying malfunctions. Appropriate usage of all required PPE. Collaborates with the plant manufacturing team and operations staff to deliver the highest quality product possible. Tracks quality assessments to ensure the plant output meets expectations daily. Utilizes checklists, standard work, quality standards, engineering standards, and iAuditor templates to monitor the manufacturing process and report on plant quality KPI's. Follows product through the entirety of the manufacturing process to ensure each step is completed as intended. Performs detailed inspections of raw materials and final products and confirm they are manufactured to standard. Tracks, records, and maintains quality assurance data. Performs other duties as required. Required Abilities Ability to demonstrate organizational skills and pay close attention to detail. Ability to communicate effectively in written or verbal form. Ability to work in a fast-paced production environment. Ability to frequently lift, push, pull, and maneuver up to 40+ pounds. Frequently exposed to outside temperatures and weather. Continuously exposed to a manufacturing/industrial environment. Qualifications High school diploma or equivalent is required. Two years of experience in a manufacturing environment preferred. Good verbal and written communication skills. Mathematical skills. Attention to detail. Organizational skills

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector reports to the Quality Manager and ensures parts and processes meet the requirements of operation work instructions, customer requirements including the drawing. The schedule for this position is 1st shift, Monday - Friday 7:30 am - 4:00 pm Essential Responsibilities: Inspects and approves incoming materials/parts by confirming to work instructions, drawings, specifications, conducting visual and measurement tests, and rejecting unacceptable materials/ parts Inspects in-process & final production parts by confirming to work instructions, specifications, conducting visual and measurement tests, recording non-conforming parts in the appropriate database Maintain records of testing and information such as number of defective products, dimensional results, etc. in accordance with the Quality procedures Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs Ability to complete DSQR training and earn DSQR certification to meet customer requirements Use inspection equipment & automated systems to perform part inspections Accomplish [Verify] first piece at the operation which approves the parts to be processed Conveys verbally and/or in writing, the condition of the parts being inspected Utilize electronic databases for submitting non conformances or obtaining work instructions Performs administrative duties consistent with departmental practices Follows all safety policies and procedures Other duties as assigned Qualifications High School diploma or GED with excellent working knowledge of trigonometry. Minimum two years of experience in manufacturing including operational inspection or supporting quality inspection utilizing hand held gages. Knowledge and ability to apply GD&T DSQR/DPRV experience preferred Ability to read blueprints and instructions to comprehend the quality expectations for parts or materials Basic computer skills including data entry Reads and interprets customer and industry specifications. Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to:• Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary• Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored• Reading and following written and verbal work instructions• May work overtime and/or weekends as assigned Qualifications• HS diploma or GED equivalency• Steel toe shoes• Basic math skills• Detailed oriented • Follow verbal and written instructions• Provide accurate and complete information for required paperwork• Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us• Variety of work in various manufacturing plants and industries• Medical, Dental, Vision and Short-Term Disability, upon eligibility• Paid weekly• Six (6) paid Holidays, upon eligibility• Forty (40) hours of paid vacation, upon eligibility• Retirement Program, upon eligibility• Birthday, Work Anniversary and Employee of the Month recognition program• Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.

Job Description Job Scope: The Quality Control Technician is to be proficient in every aspect of performing the functions of this position. The Quality Control Technician's overall responsibility, and objective, is to ensure that all aspects of the SQF, Quality, and Food Safety Programs are followed by all employees, vendors, visitors, etc. Duties and Responsibilities: Routinely check operator paperwork for accuracy and completeness. Routinely check labels, bags, and seals for accuracy. Assure checks are documented clearly, cross referenced and traceable. Communicate results of routine QA tests to production personnel. Notify supervisory personnel and Quality Control and Food Safety Manager of product quality or plant conditions which may have a negative impact on product quality and work together to correct the situation. In the case of finished product, perform follow-up testing until situation is corrected and product disposition is resolved in a quality conscious manner. As directed and trained, conduct various tests for incoming ingredients, including sieve, NIR, moisture, and mycotoxin testing. Maintain and report hold/reject product and assure its proper disposition. Collect routine ingredients and finished product samples, as required (detailed in QA Manual). Train and educate all personnel on quality and food safety practices. Promptly respond to calls for assistance clearly communicating and ETA of arrival. Promptly respond to quality/food safety concerns, following up as needed. Follow First In First Out (FIFO) and enforcing other departments to follow the same process. Continuously work with and/or assist production, maintenance, and sanitation personnel as needed throughout the shift. Maintain a clean work environment and stock supplies as needed for next shift. Ensure, and hold accountable, all personnel, visitors, vendors, etc. comply with all Standard Operating Procedures (SOPs) in addition to all SQF, Quality, and Food Safety Programs. Maintain accurate, complete, and legible paperwork. Assist Quality Control and Food Safety Manager with all other duties/tasks as needed. Be an employee champion who will maintain a strong and positive working relationship with all employees with the utmost integrity, confidentiality, and ethical values. Additional Job Functions: Assist in maintaining a positive team environment and good working relationship by maintaining a positive attitude toward all Diamond team members, vendors, and customers. Participate effectively in a team atmosphere by modeling and promoting conflict resolution, diversity, ethical practices, and organizational citizenship. Responsible for other duties as deemed necessary by Management. QUALIFICATIONS: Must be willing to/have availability to work any shift (day or night shift). Ability to work independently without immediate direction or oversight. Self-motivated with a high degree of initiative and integrity Excellent communication skills, both oral and written, to effectively communicate in a professional manner. Excellent interpersonal skills (communication, listening, team player, cooperative, approachable). Ability to be organized, flexible, and perform acceptably under pressure. Must be able to take directions, work efficiently and safely. Must be able to stand, sit, and walk for long periods including on a catwalk. Must be capable of lifting, carrying, pushing, and pulling up to 50 pounds routinely. Must be capable of overhead work and manual dexterity for manipulating or moving objects. Must be able to climb both stairs and ladders up to a high elevation. Must be able to balance, stoop, kneel, crouch, and crawl. Must be able to operate a forklift. Must be able to perform moderate to heavy labor under constant machine operation and other noise. Education & Experience Recommendations: Quality experience at a food processing facility preferred. High School Diploma or GED required.

Job DescriptionDescription: We are hiring and looking for a talented individual with hands-on experience in a QC role for a job shop/manufacturing environment position. Must have experience with quality inspections, blue prints, in process inspections, first article inspections, final inspections, and much more! Requirements: Must have 3 yrs + QC experience working in a manufacturing environment Must have 3+ years of experience with measuring instruments such as micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, etc. Faro Arm/Laser experience is highly preferred Must have very solid GD&T and math aptitude Must have a great work ethic, collaborative, team player Must have strong blue print reading skills Born in US, or INS certificate of naturalization REQUIRED Thanks for your interest in Magna Machine! EEO Disabilities/Veterans

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. This individual has the responsibility and authority to carry out assigned tasks. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.

Job Summary: Quality inspector is responsible for reviewing products and materials during manufacturing to ensure they meet quality requirements. Must be willing to work D Shift: Thursday, Friday, Saturday and Every Other Sunday, 7PM to 7AM. $2 per hour shift differential applies to this position. Job Duties: * Approving or rejecting material with respect to quality standard. * Discuss production results with the production team. * Maintain inspection reports. * Uphold company safety measures. * Generate certificate of conformance or certificate of analysis. * Ensure test equipment is calibrated and working correctly. * Verify that production adheres to quality standards and procedures, by pulling samples to test using the appropriate methods and tools. * Other duties as assigned Job Qualifications: * Minimum of a High school diploma. Would prefer a degree related to quality or manufacturing. * Ability to work alone with minimal supervision. * Must have organizational skills with an ability to prioritize and multi-task * Strong analytical and communication skills * Ability to interact in a professional manner with employees. * Ability to communicate effectively both verbally and in writing * Working understanding of Excel and Word Transcendia is an equal opportunity employer and will consider all candidates for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.