Quality control inspector jobs in Hammond, IN

Akkodis is seeking an Quality Inspector for a 8+ Contract position with a client located in Aurora, IL Pay Range: $22/hr - $23/hr (The rate may vary based on experience, education, geographic location, and other factors.) Position Responsibilities The OPS Quality Inspector performs in-process inspections and tests of manufactured parts and assemblies to verify conformance with established quality standards. Perform in-process dimensional and visual inspections of parts and subassemblies at different stages of the manufacturing process to ensure compliance to all in-process, drawing and order requirements. Conduct in-process tests such as positive material Identification tests, hardness tests, paint thickness tests, hydro tests, visual examinations of welds and others as required. Appropriately identifies and segregates non-conforming material and initiates a nonconforming material report per NCR procedure. High school diploma or general education degree (GED). Two years of related experience in a manufacturing environment. Strong attention to detail and ability to detect defects in products. Must be able to interpret basic blueprints specifications, diagrams, and other written instructions. Strong visual abilities: able to visually identify defects, annual vision examen required. Ability to use calipers, micrometers, thread gauges, hardness testers, optical comparators, thickness testers, XRF analyzers and others. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. If you are interested in this Quality Inspector job, then please click APPLY NOW. For other opportunities available at Akkodis go to **************** If you have questions about the position, please contact Sunny Kumar at *****************************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Pride Health is hiring a Quality Control Technician to support our client's medical facility based in Elmhurst, Illinois. This is a 13-week contract job opportunity and a great way to start working with a top-tier healthcare organization! Job Summary: The Sterile Processing Quality Control Technician ensures the highest standards of instrument cleanliness, assembly accuracy, and quality assurance in sterile processing operations. This role combines hands-on technical processing responsibilities with detailed inspection and documentation tasks critical to patient safety and process reliability. This position focuses on quality assurance beyond standard sterile processing technician duties, ensuring compliance with all regulatory and internal standards while maintaining an unwavering commitment to safety and process excellence. Job Responsibilities: -Follow all ANSI/AAMI standards, manufacturer Instructions for Use (IFUs), SOPs, and company Work Instructions. -Decontaminate used surgical instruments and equipment using proper PPE and protocols. -Disassemble, clean, and reassemble complex surgical instruments as required. -Accurately assemble and package instrument trays and sets per guidelines. -Operate washers, sterilizers, and other processing equipment safely and effectively. -Inspect instruments for cleanliness, functionality, and damage prior to packaging. -Document missing or damaged instruments per SOPs. Required Skills & Experience: -Hands-on experience in sterile processing, demonstrating proficiency in decontamination, assembly, and sterilization procedures. -Strong attention to detail. -Ability to work effectively under pressure in a fast-paced, team-oriented environment. -General knowledge of surgical instruments and processing protocols. -Knowledge of sterilization techniques, including steam sterilization and infection control practices. -Familiarity with ANSI/AAMI standards and manufacturer Instructions for Use (IFUs). Additional Information: Location: Elmhurst, Illinois Schedule: 2nd Shift- 3 pm-11:30 pm & 3rd Shift- 11:00 pm-7:30am Pay Range: $24/Hr. - $28/Hr. Start: 12/15/2025 *Offered pay rate will be based on education, experience, and healthcare credentials. Interested? Apply now! About Pride Health As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Job Posting Start Date 12-17-2025 Job Posting End Date 01-19-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Job Description To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Control Inspector located in Buffalo Grove, IL Reporting to the manager the potential candidate would inspect electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. 0600pm-0600am Rotating Shift Responsibilities: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product. Qualifications: Completion of a high school degree or equivalent is preferred. Successful completion of company provided training may be required. Typically requires 1 year of related experience. AW20 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Receives specific assignments from the station manager relative to inspection position to be worked and any special instructions needed. Performs assigned tasks obtaining assistance as required for unusual or difficult problems encountered. Work is reviewed in terms of ability to complete accurate emission inspections within established time limits, follow proper test procedures, ability to deal effectively with the public, and cash collection accuracy. * Serves as lead lane inspector performing emission inspection functions in all test positions. * Assists in directing and training Lane Inspectors. * Follows established emission inspection procedures in testing vehicles. * Responsible for collecting inspection fees and accounting for the proper dollar amount collected in cash and charges. * Enters appropriate vehicle information into computer and verifies vehicle data against computer data. * Performs general lane operations including: tag renewals, greeting motorists as they enter the inspection station and provides general program information. * Operates vehicles during the emissions and evaporative system test. * Provides test results to customers and explains the printout as necessary. * Instructs customers on the next step in the inspections process after test is completed. * Collects documents from customers relative to inspection re-tests. * Refers questions or comments to appropriate individuals. * Performs other duties as assigned such as janitorial, lawn maintenance, and other facility care tasks as required. * Assists with opening and closing the station as needed. * Must be available to work 40 hours per week during station operating hours Tues-- Sat 8AM--6PM * Assist other stations as needed and as assigned. * Excellent customer service skills. * High School Diploma or equivalent preferred. * Previous computer and automotive experience helpful. * Must be 18 years of age. * Candidate must be in good standing with company. * Must possess manual dexterity sufficient to operate computer keyboard, make electronic equipment connections * Ability to endure long period of standing and walking. * Ability to stoop, bend, twist, reach and squat and balance body weight on one or both knees. * Ability to work in extreme hot and cold weather. * Ability to operate a motor vehicle, including a manual transmission and to operate testing equipment.

This position is responsible for providing analytical support and leadership within the quality organization to Operations at the Montgomery, Illinois facility. Key Responsibilities: Performs sampling, testing, and data reporting to ensure finished products, intermediates, and raw materials conform to release specifications. Provides analytical support to experimental orders. Follows all laboratory safety policies including safe handling of reagents and follows all chemical waste handling instructions according to VVF policies and procedures. Follows written lab procedures, or published standard methods or methods from compendia sources. Collects and analyzes data. Applies appropriate methodologies, data interpretation techniques, statistics, and computer software to assist in resolving production difficulties. Performs scheduled instrument checks and calibrations; assists in preparing, standardizing and labeling standard solutions. Complies with regulatory and GMP requirements relevant to job responsibilities in a GMP laboratory. Maintains accurate laboratory notebooks and other laboratory records. Troubleshoots the performance or accuracy issues of basic laboratory analytical instruments (including HPLC, Karl Fischer, and autotitrator instrumentation). Utilizes software programs for data collection and release documentation (ie: LIMs, LabX, Microsoft Dynamics GP, Excel, Office, etc) Initiates nonconforming reports for packaging, raw materials, in-process and finished product as necessary. Authors SOP's and Work instructions as assigned to support the quality systems. Assists in training activities, as needed. Ensures compliance with Company and Government regulations. Qualifications Basic Minimum Requirements: Meet the legal minimum age requirement. Authorized to work in the United States. Bachelor of Science Degree in Chemistry or related field or equivalent combination of experience and education. Ability to work all shifts. Ability to work overtime as needed. Other Required Skills: Ability to work independently and as part of a team. Strong attention to detail, planning and organizational skills. Strong written, verbal and interpersonal skills. Preferred Qualifications: 2 plus years laboratory experience. Experience in the operation of analytical instrumentation and other lab equipment relevant to the job responsibilities. Proficient in lab instrument maintenance and troubleshooting with specific certification. Physical Requirements Able to sit for long periods of time utilizing a computer. Able to stand for long periods of time. Lifting up to 25 lbs. VVF is an equal opportunity employer. We evaluate qualified applicants, without regard to race, color, religion, national origin, sex or gender, age, disability, veteran status, sexual orientation, gender identity or expression, genetic information, including the perception that a person has any of those characteristics or that the person is associated with a person who has, or is perceived to have, any of those characteristics, or any other consideration made unlawful by applicable law. VVF is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call Human Resources at ************** and let us know the nature of your request and your contact information.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Date posted: October 6, 2025 Pay: $27.50 per hour Job description: Parsec, LLC, a subsidiary of Universal Logistics Holdings, Inc., is a leading provider of contract intermodal management services throughout North America. Parsec's experienced management team, with its state-of-the art equipment provides solutions to its customers resulting in proven efficiencies and savings. We focus every day to be the most efficient leader in the transportation industry, while serving our customers and people with utmost respect and integrity. We are currently hiring for a supervisor position of the Depot Gate. This role is essential to the daily operations of our terminal and is responsible for efficiently and accurately coordinates the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for any type of damage. Gate Inspector Pay Rate- $27.50 hourly Watch our Parsec, Inc.- Team Member Interviews: ******************************************* Benefits: Medical (3 plan options) Dental & Vision 401(k) Paid Weekly Paid Time Off (Vacation & Sick Days - after probationary period) Amazing Opportunity for Growth Responsibilities: Gate Inspector Performs inspections chassis entering or leaving the yard gate using a hand-held device Mark & input the issues found of the chassis Weekly Yard Inventory Check Direct Drivers Chassis Lots Performs work in accordance with established safety & quality management procedures Operate Yard Hostler & Forklift Other duties as assigned Requirements Strong customer service skills Computer Literate Attention to detail Ability to follow directions Ability to work in an outside environment in all weather conditions year round Qualifications: Previous experience as a gate clerk or in a similar role within the intermodal rail or logistic industry is preferred Valid driver's license High school diploma or equivalent Excellent communication and interpersonal skills Strong attention to detail and accuracy in data entry and recordkeeping Ability to multitask and prioritize tasks effectively in a fast-paced environment Proficiency in using computer systems and data entry software Basic knowledge of transportation and logistics operations Familiarity with relevant safety and security regulations Ability to work independently as well as in a team environment Competencies: Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments. Interpersonal Skills--Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication--Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Parsec is an equal opportunity employer and does not discriminate against applicants or employees on the basis of race, color, religion, gender including pregnancy, childbirth, or related medical conditions), genetic information, national origin, ancestry, age, physical or mental disability, legally protected medical conditions, family care status, veteran status, sexual orientation, or any other basis protected by local, state or federal laws. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance

About Crown: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 23,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring the best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Division Overview: Crown's Beverage Division manufactures a variety of packaging solutions for soft drinks, craft beers, coffees and teas as well as new energy drinks. Crown Beverage leads the packaging industry with innovative technologies that redefine how the world looks at beverage cans. With a large printable surface area and a wide range of sizes, shapes and decorating options, our aluminum cans are the perfect packaging format to create compelling brand presence where it counts. Here is your chance to join the Crown Beverage Division. Location: 1035 E. North St. Bradley, IL. The Quality Control Technician works closely with Supervision and to ensure optimum levels in Quality Inspections, Testing, Package identification, and Final packaging. Duties And Responsibilities: Reporting directly to the Quality Assurance Manager and Production Supervisor, the Quality Control Technician responsibilities would include, but not be limited to, the following: Understand and follow verbal instructions to completion of assigned tasks. With focus on Safety and Spoilage, the responsibility of the Quality Control Technician will ensure a quality product is produced thru inspections and testing. Responsible for the quality of all operations of all process for the production of aluminum beverage cans. Ability to identify quality problems, and disposition. . Communicates all pertinent information between management, co-workers, and between shifts on changes to equipment, production problems or any other related information. Assists and trains and/or coaching of all new Technicians as needed or required. Applies skills, methods learned to improve plant production. Responsible in following JHA's, SOP's, Rules, 6S Housekeeping, maintaining gauging equipment and modifications of existing production standards to achieve optimal efficiencies Enter information into a computer to document data. Accurate and continuous quality checks and record keeping required. Complete and/or administer necessary documentation such as monthly SAFE cards, accident/near miss/hazard reporting, and data process control input. Performs other job-related duties as required or assigned. JOB REQUIREMENTS * In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements High School Education/GED 2-3 year(s) experience with computer skills in inspecting, testing, packaging and high speed manufacturing environment. Basic Computer skills required. Must be available to work various shifts if needed and be able to work nights, weekends, and overtime to cover absences or provide additional support. Preferred Requirements but not mandatory: Knowledge of all OSHA related training in a manufacturing environment. Beverage Packaging Quality industry experience Knowledge of AS400, QAS, and NWA 6S Training Competencies Problem solving skills through an individual and/or collaborative approach Ability to work independently or with a team. With consensus be able to look at new solutions and “think outside the box”. Effective leadership skills such as conflict resolution, communication, decision making, etc. Demonstrated good relations skills and the ability to motivate or team with people. Excellent time management skills and multi-tasking. Excellent oral and written communication skills. Computer skills and working knowledge of various Microsoft programs (Excel, Word, Access, etc.). Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. May be required to climb stairs to upper level at times. The associate may lift and/or move up to 50 pounds. Working Conditions Generally works in a manufacturing, office, packaging, and warehouse environment. While performing the duties of this job, the associate will be exposed to light lifting, warehouse forklift traffic. Production noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Benefits: Crown offers competitive pay, comprehensive benefits including free company paid health insurance for employees as well as company matched 401(k). COMPENSATION: Actual salary will be determined based on skill and experience level. Pay rate $ 27.96- $ 28.57 per hour. Starting at $ 27.96 per hour. Interested: Take the next step in your career and apply online today at www.crowncork.com/careers. EEO/AA/Vets/Disabled

Receives specific assignments from the station manager relative to inspection position to be worked and any special instructions needed. Performs assigned tasks obtaining assistance as required for unusual or difficult problems encountered. Work is reviewed in terms of ability to complete accurate emission inspections within established time limits, follow proper test procedures, ability to deal effectively with the public, and cash collection accuracy. Serves as lead lane inspector performing emission inspection functions in all test positions. Assists in directing and training Lane Inspectors. Follows established emission inspection procedures in testing vehicles. Responsible for collecting inspection fees and accounting for the proper dollar amount collected in cash and charges. Enters appropriate vehicle information into computer and verifies vehicle data against computer data. Performs general lane operations including: tag renewals, greeting motorists as they enter the inspection station and provides general program information. Operates vehicles during the emissions and evaporative system test. Provides test results to customers and explains the printout as necessary. Instructs customers on the next step in the inspections process after test is completed. Collects documents from customers relative to inspection re-tests. Refers questions or comments to appropriate individuals. Performs other duties as assigned such as janitorial, lawn maintenance, and other facility care tasks as required. Assists with opening and closing the station as needed. Must be available to work 40 hours per week during station operating hours Tues-- Sat 8AM--6PM Assist other stations as needed and as assigned.

Job Board Only - No Asmts Allowed Joliet Staffing is Hiring: Quality Inspector in Chicago Heights, IL! General Purpose of the Job The Quality Inspector is responsible for ensuring that all customer products are manufactured to the correct specifications throughout the entire production process. This includes verifying compliance with manufacturing requirements and customer standards. Job Title: Quality Inspector Schedule: 6:30 AM - 3:00 PM Pay Rate: $18.00/HR Position Type: Temp-to-Hire Benefits through Jolie Staffing: Medical, Dental, AD&D Essential Duties & Responsibilities Inspect parts according to production drawings before running full production, ensuring all dimensions meet specifications. Maintain daily records of final inspections and shipping processes. Provide assistance to Machine Operators when necessary. Coordinate with production teams to conduct plant-wide gauge and equipment calibration. Identify non-conforming products and properly document all rejected materials/products. Perform in-process product verification as needed. Confirm revision accuracy on all related documentation and products. Maintain basic computer documentation and inspection reporting. Ensure the company complies with applicable manufacturing standards and codes. Inspect incoming raw materials, parts, and subassemblies, mark results, and complete required paperwork. Perform first-piece inspections per control plan before production begins. Conduct in-process inspections to verify adherence to drawings, specifications, and manufacturing plans. Perform final inspection to confirm the product meets customer standards and all certifications/documentation are in place prior to shipment. Maintain and manage inspection fixtures, gauges, and measuring devices to ensure accurate measurements and documentation. Knowledge Base Understanding of steel fabrication processes, including laser cutting, press brake bending, and welding. Knowledge of paint line powder coating processes and cured finish testing. Proficient use of metrology and measurement instruments. Ability to read and interpret production drawings, blueprints, and technical specifications. Education & Experience High School Diploma or GED required; Associate degree preferred. One to three years of related manufacturing or quality inspection experience, or a combination of education and experience. Language Skills Ability to read and interpret technical procedures and business documentation. Capable of preparing written reports and presenting information clearly. Must be bilingual (English/Spanish). Mathematical Skills Ability to apply fractions, percentages, ratios, and proportions to practical manufacturing and measurement scenarios. Reasoning Ability Ability to identify problems, collect data, analyze results, and draw valid conclusions. Capable of interpreting detailed instructions, procedures, and technical documents. #IND-M

Job Description Key Areas of Responsibility (Answerable for the following end results) 1. Inspect parts at 200% inspection of headliners. 2. Assist hourly workforce with end of line (EOL) responsibilities. 3. Support APQP activities including PPAP, Trial Runs, and Engineering changes. · Perform Inspection activities as needed. · Verify material is properly identified · Provide and communicate breakpoint 4. Ensure all nonconforming material is properly identified, contained and dispositional per the Control Plan and BOS. · Identify and communicate nonconformance internally and between shifts · Monitor effectiveness of Quality Alert · Provide and communicate breakpoint · Support problem solving activity · Escalate out of specification conditions per Control Plan requirements 5. Ensure area of responsibility, equipment, inspection fixtures and documentation is organized, clean and in good working order and communicate any out of order conditions. 6. Document all activities as required. 7. Adhere to all company guidelines for Emergency Evacuation to ensure employee safety. 8. Any additional responsibility deemed necessary by management. Limits of Authority · Advise Department Supervisor/Manager of those situations that may pose a significant risk to the program, product assurance, facilities, employee safety or customer satisfaction results. · Communicate and work adjacent with Quality Coordinator to reach Quality goals · Initiate actions to prevent the occurrence of any nonconformance relating to product, process & systems. · Identify and record any problems relating to the product, process or system. · Initiate, recommend or provide solutions through the appropriate channels and verify implementation. · Control further processing and delivery of nonconforming product until the deficiency is corrected. Basic Education, Experience and Training Requirements · High school diploma or equivalent. · At least 1 year of automotive experience is preferred. · Excellent written, mathematical, interpersonal and analytical skill. · Proficient computer skills in Word, Excel, Power Point, and data entry. · Working knowledge of statistics. · Able to maintain confidentiality on products, services and processes. · Must be flexible and able to work across all shifts as needed. Internal Training Requirements · Dakkota Orientation · Dakkota Vision and Culture · Departmental Training o Process 12 - Preventive, Corrective and Nonconformance Management o Process 16 - Quality and Inspection Management · Company Training o BOS Overview o Information Technology o Outlook o Purchase Requisitions · Quality Mission Statement Health, Safety and Physical Demand Requirements · Normal amount of sitting and standing, average mobility to move around an office and plant environment, able to conduct normal amount of work on a computer. Risks Associated with Job Function · None Travel Requirements · None Life at Dakkota Our success is rooted in meaningful relationships and a culture that feels like family. We champion compassion, respect, and work-life balance, while supporting each team member's personal and professional growth. Through ongoing development, competitive pay, and a comprehensive benefits package, we empower our people to thrive both at work and in life. The pay range for this role is $36,700 - $43,200 per year. This role is also eligible for bonus/incentive pay. The pay range listed for this position represents a good-faith estimate of potential compensation at the time of posting. Actual pay may vary based on factors such as experience, skills, and location. This range is subject to change in the future and does not guarantee a specific salary. Our benefits include paid time off, medical, dental, and vision coverage, and a 401(k) plan for eligible employees. Explore everything we have to offer at Dakkota Careers!

AP Emissions Technologies As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. The Quality Assurance Technician is responsible for ensuring parts received externally and produced internally are of excellent quality, meeting all form, fit, and function specifications. ESSENTIAL JOB DUTIES Inspect and evaluate parts, rejects parts as necessary, and initiating appropriate corrective action. Review and interpret relative documentation to include but not limited to, part drawings, part lists, part datasheets, part samples and fixtures, Bill of Materials, Bill of Operations, and Kanban Structures. Maintain quality standards documentation, databases, and records relative to respective assigned area(s). Document defects with conciseness, accuracy, and details to ensure defects are not reproduced. Other duties as assigned. KNOWLEDGE, SKILLS & ABILITIES Thorough understanding of DataFlo system (or equivalent system), processes and procedures. Must be able to utilize and comprehend Quality Verification Resources to include but not limited to check gauges, calipers, micrometers, scaled ruler, and the use of different hand tools. Must be able to interpret blueprints, part datasheets, and fixtures. Ability to work in a fast-paced, high-speed environment, follow standardized work, and adhere to safe work practices in a continuous improvement environment. Ability to effectively follow instructions; work independently with minimum supervision. Must know basic math such as addition, subtraction, division, and multiplication. Must demonstrate basic computer skills. Demonstrated good housekeeping practices. Strong problem-solving skills. Possess a positive attitude. Strong work ethic, ability to multi-task, and excellent communication skills. EDUCATION, CREDENTIALS & EXPERIENCE High School Diploma or GED. (preferred) 6 months to 1 year of experience as a QC inspector/technician. WORKING ENVIRONMENT & PHYSICAL EFFORT Must adhere to safety standards and wear the correct PPE as specified for the job, inclusive of steeled toe shoes and warehouse vests. Repetitive work and long periods of standing, bending, twisting or lifting, need mental and physical stamina and strength. Must be able to lift, load, unload, push, and pull parts weighing up to 50 pounds. Hours as assigned with the probability of overtime during the week and on Saturday. Must be able to work in the summer heat and winter cold. DISCLAIMER This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. AP Emission Technologies is an equal opportunity employer and will not discriminate against any applicant for employment because of race, color, religion, sex, national origin, disability, age, genetic information, or any other status protected by state or local law for an individual who falls within the jurisdiction of such law. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Quality Control Associate (Entry Level) Inspect and document vehicles for carrier damage Verify reported vehicle damage on and off rail cars Help manage facility access until repairs are completed Transmit damage document to the OEM reporting sites (Data Entry) Report damages in the BNSF system Training Provided Areas of Responsibility: Comply with all industry, client, and company safety regulations and operating procedures Work independently and with a team Other tasks as assigned What's Required: High School Diploma or GED Safety first mentality Able to meet attendance requirements Basic knowledge of Microsoft Office Suite Able to work on rail cars in all elements (outside position) Valid driver's license Type: F/T Pay: $20/ hr Hours: Wed-Sun 8:30AM-5:00PM We Offer: A Full Benefits package including Medical, Dental, 401K Paid Holidays and Vacations An annual Steel Toe Boot allowance All Personal Protective Equipment (PPE) provided Veteran Friendly We love to promote hard workers Company Overview: Established in 1987, Road & Rail Services has grown and diversified to become a leading provider of rail-related services in North America. Our network of skilled associates provides plant and terminal operating expertise as well as field maintenance of rail assets for railroads, rail shippers, and owners of rail related equipment and facilities. Visit us online at ******************* for more information!

Job Title: Quality Control Inspector Department: Quality Reports to: Quality Control Manager Classification: Non-Exempt Travel: None GWS is the North American leader in the design and manufacturing of custom cutting tools. Servicing industries including Aerospace, Automotive, Medical, Energy and general Engineering. As the fastest growing company in our industry, the career opportunities are numerous and the pathways for advancement nearly limitless. Entry-level position with limited prior training or relevant work experience. Has basic skills to perform routine tasks. Works within clearly defined standard operating procedures. Works with either close supervision or under clearly defined procedures. Job Summary: The Quality Control Inspector is responsible for ensuring that all products meet customer and company standards by inspecting end mills and form tools at the end of production. Responsibilities include inspection and test of product, process audits and disposition of non conforming product. Coordinating the use, calibration, and servicing of all inspection equipment. Duties/Responsibilities: Inspect cutting tools manufactured within extremely tight tolerances. Examine tools for proper geometry within blueprint specifications. Compare quantity and part number of items received with procurement data and other specifications to ensure completeness of and accuracy of order. Approve or reject items, and record inspection and disposition data. Inspect incoming raw material, thin film coating, vendor supplied tooling, grinding wheel geometric configurations and final inspections. Prepare inspection procedures for reference use in subsequent inspections. Run inspection programs for in-process process and final inspection. Assist in etching product identifications. Other duties as assigned. Education and Experience: High school diploma or general education degree (GED) or 1-3 years industry related experience and/or training. Certification from a qualified training institution in the field of tool and cutter grinding is ideal but not . Manufacturing experience is . Strong geometry knowledge is . Experience with hand gauges and non contact-contact inspection equipment is required. Required Skills/Abilities: Ability to convert metric to inch and decimal to fractions. Strong analytical troubleshooting ability. Uses standard operating procedures to guide own work and solve standard problems. Applies basic skills to perform simple activities. Understands how the assigned duties relate to others in the team and how the team integrates with others. Uses communication skills to exchange information. Use assigned methods, tools and processes. Support sharing of best practices. Familiarity with navigating Windows based computer programs. knowledge of the gauge calibration process. Ability to read and comprehend blueprints. Knowledge of calipers, hand micrometers, and metrology equipment. Ability to work in a fast paced manufacturing environment. Involvement And Knowledge of the use of quality management system procedures, forms, work instructions, and certifications. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

ATMI Precast is not your average construction company. You will join a high-performing team that values clear communication, strong processes, and doing things the right way. Our leadership is approachable, our projects are meaningful, and your work will make a real difference. As a Quality Control Inspector A, you will be on the front lines of ensuring the quality, precision, and strength of our precast concrete products. You will gain hands-on experience in inspection, testing, and production, working directly with skilled professionals who take pride in craftsmanship and accuracy. Whether inspecting forms, testing materials, or verifying finished products, your attention to detail will play a key role in keeping our projects on track and our standards high. Summary The Quality Control Inspector A is responsible for checking the quality of precast concrete panels through one of three specialties: pre-pour inspection, post-pour inspection, or laboratory testing. Each inspector ensures that all work meets company, PCI, and industry standards while supporting ATMI's commitment to quality, safety, and continuous improvement. Responsibilities Pre-Pour Inspection Inspect forms to PCI-MNL-117 tolerances, including squareness, location of architectural features and openings, reinforcement placement, and surface quality Verify and record strand elongations Prepare and cast next-day concrete cylinders for testing Report any discrepancies or deviations to QC management Post-Pour Inspection Approve finished products by verifying specifications and conducting visual and dimensional checks Release tables to stripping crews by breaking next-day cylinders Tag panels with all required information, including cast date, panel number, control number, job number, and bed number Identify nonconformities and confirm rework when required Report any discrepancies to QC management Laboratory Testing Conduct fresh concrete testing for temperature, unit weight, air content, slump, and 28-day cylinders Store, break, and record 28-day cylinder results Perform aggregate testing such as moistures and gradations Maintain a clean and organized laboratory environment Requirements High school diploma or equivalent Ability to occasionally lift and move objects up to 50 lbs Ability to work outdoors in varying conditions including heat, humidity, and exposure to dust Strong attention to detail and commitment to accuracy Willingness to learn and follow established procedures Excellent communication and teamwork skills

Job Description Step into a day of precision Start your day validating the calibration status of measurement equipment, then move to acceptance testing on incoming materials from external suppliers. You'll record findings with care, collaborate with Engineering and Production to remove roadblocks, and close the loop by documenting issues and resolutions. Throughout, you'll follow the policies and procedures of Aztech Locknut Company and keep data flowing accurately through our systems. Choose your growth path We're serious about development. After your first 90 days, you'll select a formal path and begin approved courses and projects: Quality Inspection Track: Pursue ASQ certifications such as Quality Inspector, Calibration Technician, and Certified Quality Technician. Mechanical Engineering Track: Build applied engineering skills alongside production and engineering teams through structured coursework and projects. What you'll do Execute daily inspections using established criteria, procedures, and a range of metrology tools. Inspect products received from external sources and disposition findings. Perform and/or verify equipment calibrations and keep accurate calibration records. Partner closely with Engineering and Production to resolve quality concerns during manufacturing. Maintain thorough documentation of inspections, nonconformances, and corrective actions. Complete accurate data entry to support quality records and reporting. Adhere to all policies and procedures of Aztech Locknut Company. Qualifications High school diploma or equivalent (additional education in quality or related field is a plus). Experience in quality assurance, inspection, or a similar function. Strong attention to detail and analytical problem-solving. Comfort working independently and in cross-functional teams. Knowledge of quality control methods and tools. Clear written and verbal communication skills. Proficiency with Microsoft Office and quality management software. Ability to lift and move up to 50 lbs. You should be proficient in Continuous Improvement AS9100 Tolerance Analysis Mechanical Testing Blueprint Reading Machines & technologies you'll use Vision System Ready to build a career in quality or mechanical engineering while making a tangible impact on product reliability? We look forward to your application.

In the Quality Inspector role, you will be responsible for inspection and quality services to ensure company products and processes meet customer, company, and other specification. This role supports company initiatives, provides training and assists the Quality Control Manager. Essential Responsibilities: Comply with all quality, safety, and work rules and regulations. Quality Management: Assure that employees operate consistently within the policies and procedures of VPET USA INC. Evaluate problems and make initial recommendations for possible corrective action to supervisor. Participate in the construction and/or revision of SOPs for the inspection function. Provide support to production team when required. Visually and physically inspects materials, components, subassemblies, assemblies, tools, and final product configuration using blueprints, sketches, engineering drawings, and orders, and other applicable sources to observe, measure, record conformity to customer, regulatory, and company specifications. Records compliance with quality standards to verify that company products and processes meet customer, company, and other specifications. Solves inspection problems; methods-procedures, plans, and details. Audits products and processes to verify system. Maintains necessary inspection logs and writes inspection reports. Communicate quality problems and work with engineering and leads to support, investigate and resolve the quality issues. Perform all other duties as assigned. Minimum Requirements: Ability to manage multiple tasks, set priorities, identify, address problems and meet deadlines. Self-motivated with ability to work independently in a fast-paced environment with changing priorities. Computer skills to include Microsoft programs. Must be able to use computer programs to keep track of administrative tasks such as report writing, analysis of work orders, evaluations, etc. English skills must be proficient to understand, read, write and speak English Ability to work overtime and weekends as required. Must be committed to the success of the entire organization. Physical Requirements: Requirements include, but are not limited to: Must be able to stand and walk for prolonged periods of time. Must be able to lift and carry up to 25 lbs. Must be able to push, pull, twist, climb, balance, stoop, kneel, and crawl. Must be able to perform repetitive motions such as reaching and grasping. Must be able to use a ladder or step ladder. Work environment is in a warehouse and temperatures inside vary between hot or cold based on the outside conditions. This is a fast-paced environment with constantly changing priorities. Education/Experience: High School diploma or equivalent preferred. Minimum of 3 years of experience in a similar role or a combination of experience and education will be considered. Familiar with SQF 2000, HACCP, and GMP preferred. Experience in the plastic bottle industry or in a manufacturing environment is preferred. Competitive Benefits: Medical (HMO), dental and vision insurance premium. 401k plan, Employer contributes 3%, up to 5%. Company offers vacation and sick pay. Holiday Pay: Eight (8) paid holidays per year. Basic Life Insurance Paid (25K policy). We are an Equal Opportunity/ Affirmative Action Employer and do not discriminate against applicants due to veteran status, disability, race, gender, gender identity, sexual orientation or other protected characteristics.

This is an hourly position in Manteno, IL that reports to the QC Supervisor. QC Inspector conducts Line clearance, routine analysis of raw materials, in-process & finished products using a variety of testing devices & procedures to maintain product quality. Ensures that all documents for Quality compliance are consistently preserved for Product Traceability, Customer & Regulatory audit. Ensures that SOPs are adhered to in production line & reports non-compliance promptly for immediate correction to avoid possible product or raw material spoilage. Scope of Job Function: Conducts line inspections prior to start-up, verifies that items in the checklist listed in the Line Clearance Approval sheet are complied. Preforms swab test & allergen test as per established procedures, documents & communicate results to production to release the line. Conducts GMP compliance & in-line process inspection & document results in SafetyChain. Conducts metal detector tests (Fe, non-Fe, & SS) every 2 hrs. for ALL running lines. Record results in the SafetyChain Metal Detector Check form. Verifies that production complete the test at the start & end of the run for each running line. Compares analysis results to specifications & informs the QC Supervisor if results are not in compliance. Confirms compliance with all other specifications including labeling, packaging, code dating & other customer specific requirements. Performs analytical tests, using standard methods of analysis specific to the raw material or finished product. The test includes but limited to TA, TS pH, leakers, viscosity, moisture, & net weight. Puts “MRB-HOLD” tag on non-compliant products identified while still in the production floor. Collects retention samples & puts them in Cooler Retains Area for future reference during traceability or customer complaints. Conducts GMP (Good Manufacturing Practices) compliance inspection & ensures mix deck raw material is not expired. Checks refrigerated raw materials in the mix deck to ensure that material are not kept unrefrigerated for extended period of time that may jeopardize product safety & quality integrity (45F max allowed). Verifies compliance to SOP (Standard Operating Procedures) & prepares incident report promptly. Inspects products retained for shelf life to validate product shelf life & customers claim on product defects. Collects samples for micro & environmental testing as per established sampling scheme. Inspects in-coming Raw Materials per QC protocol, reports non-compliance to the QC Supervisor to complete SCAR. Conducts QCP & CCP tests as per protocol, documents result in SafetyChain & confirms specs compliance to Food Safety & QM systems. Performs analytical tests on samples, using standard methods of analysis specific to the raw material or finished product. Puts “HOLD” tag on non-conforming raw materials or finished products, record in the MRB log & removes tag as soon as Quality Management disposition is issued. Maintains orderliness & cleanliness in the Lab. Other duties as assigned. Requirements Required: High School Graduate with a background in any Science courses (Food Science, Chemistry, Microbiology etc.) or equivalent work experience an advantage. Competence in math & calculations with computer skills. Good attention to details & ability to recognize non-conformance to SOP. Good organization skills & detailed in reporting. Good communication & interpersonal skills. Ability to work well with other departments in the company especially in production environment. DESIRED: Knowledge of general manufacturing environment & practices. Business Acumen.

Description: The Quality Control Inspector is responsible for ensuring that all incoming products meet company quality and food safety standards. This role requires close collaboration with suppliers, internal teams, and management to identify, report, and resolve quality issues. The specialist will oversee product evaluations, inventory management, and shipping/receiving operations while supporting the company's food safety program. The Quality Control Inspector will oversee distribution center procedures and compliance with third party audits, provide feedback to domestic and international growers, and entering & reviewing data and reports. Responsibilities: Perform thorough quality inspections on all incoming products to ensure compliance with established standards. Immediately notify management of any deviations from quality specifications or potential food safety concerns. Document and communicate inspection results to the appropriate supplier group. Collaborate with suppliers to address and resolve quality-related issues. Conduct evaluations of new product varieties, packaging materials, and shelf-life performance. Manage cooler inventory and monitor product condition to maintain quality and freshness. Oversee shipping and receiving processes to ensure accuracy and adherence to company standards. Provide cross-training and support for the company's food safety program. Perform additional duties as assigned to support departmental and organizational objectives. Requirements: Required Skills / Abilities: High school diploma or equivalent; Degree in Food Science, Quality Assurance, or related field preferred. Minimum of 1-3 years of experience in quality control, food safety, or related role (produce or food industry experience preferred). Knowledge of food safety regulations, quality assurance practices, and inventory management. Strong attention to detail and ability to identify non-conformance issues. Effective communication skills for interacting with suppliers, management, and internal teams. Proficiency with basic computer applications (Microsoft Office, inventory systems, quality tracking tools). Strong supervisory and leadership skills Ability to prioritize tasks and to delegate them when appropriate Written and oral communication in both Spanish and English (Preferred) Physical Abilities: Extended Computer Use: The role requires prolonged periods of computer use, including typing, data analysis, and report generation. Standing and Walking: Frequent standing and walking may be necessary, especially during operation shifts in warehouse, suppliers/customer facilities, meetings, presentations, or visits to other locations. Occasionally required to travel domestically and internationally to attend meetings, conferences, and other business-related events. Lifting and Carrying: While not typically a primary responsibility, the role may occasionally involve lifting or carrying lightweight objects. Manual Dexterity: Frequently required to use hands to type, handle, or feel objects, tools, or controls, and reach with hands and arms. Visual Requirements: Ability to read, analyze, and interpret complex statistical data, databases, financial data and information on a computer screen and in printed materials. Communication: Regularly required to communicate with others to exchange information effectively by email, both in person and via telephone or video conferencing Stress Management: The ability to manage stress effectively in a fast-paced and dynamic work environment is important for success in the role. Adaptability: Flexibility and adaptability to changing priorities, deadlines, and business needs are necessary. Professional Appearance: Maintaining a professional appearance is important, especially when representing the company at external events or meetings. Benefits 401(k) Health insurance Paid time off Vision insurance Dental insurance Life insurance Notice: Sun Belle is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, marital status, disability, or any other protected status. All qualified applicants will receive consideration for employment. Sun Belle has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.

: HireQuest Direct in Griffith is hiring for Quality Inspectors in Hammond, IN and Chicago, IL! It is a full-time and temp-to-hire position. Pay is $10/hr. **Pays Weekly!!** Shifts: 6 am - 6 pm and 6 pm - 6 am Weekend shifts. Friday & Saturday - Days Sun & Monday - Nights Requirements: Must have a reliable transportation Ability to stand for 12 hours **APPLY NOW** Please either call us or visit us!! · Office Number: ************** · Office Location: 1935 W. Glen Park Ave., Griffith, IN 46319 Sincerely, Your HireQuest Direct Griffith Team ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HireQuest Direct (formerly Command Center, Inc.) is a nationally recognized temporary staffing agency that provides services in areas such as general labor, industrial, skilled trade, hospitality, and construction. We take the time to get to know each applicant to ensure the best match when placing in all positions. We serve many clients so we have various opportunities available each day. Call us to experience staffing done differently! Note: This job description is not intended to represent a complete, comprehensive list of all duties, responsibilities, and requirements that may be needed for this position. Unplanned activities and additional responsibilities and requirements may be assigned.