Quality control inspector jobs in Helena, MT

QA Inspector ***Work Location: Cavalier, ND (Cavalier SFB)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Observes and investigates construction phases for compliance with schedules, specifications, and shop drawings. Identifies problems, recommends changes, and assesses the need for contract modifications. Performs inspections and completes daily site reports in RMS. Include comments and monitoring of progress, work activities, safety issues and subcontractor manpower in the reports. Assists in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and assists with preparation of contract modification documentation. Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Participates and executes RFI and Submittal reviews, including coordination with the designers, RE, and technical experts and executes responses to the contractor. Logs and maintains data as necessary to assist with project management and decision making. Performs other duties as assigned Education/Experience: High School Diploma/GED minimum; Construction related degree, preferred Minimum of 5 years of applicable experience on construction projects large complex multimillion dollar federal projects, Department of Defense or USACE preferred Experience using RMS 3.0, preferred Experience with three-phase inspection process Experience with OSHA and EM 385-1-1 USACE Safety Manual, preferred Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Coca-Cola, with its many brands, has been recognized and enjoyed by people around the world for over a century. Founded in 1956, Coca-Cola Bottling Company High Country is a family owned, regional Bottler serving portions of Colorado, Minnesota, Montana, North Dakota, South Dakota, Utah, and Wyoming. Every day we honor our core values of Honesty, Integrity, Trust, and Respect through encouraging our team members to develop, grow and serve. Together we become more effective and productive… in life and work. Refresh your career and join us in refreshing the world! Apply Today! Hourly pay for the Production Quality Control Technician role is $20.00 per hour. Robust benefits package including 100% paid employee health, dental and vision options! 100% Employer Paid Life Insurance for Employees 401K With Employer Match Product Discounts Much more! What will you do as a Production Quality Control Technician? As part of the Operations Team, the Quality Control Technician is responsible for quality control functions including inventory control and auditing to assure company standards are maintained and product integrity is preserved. The QC Technician conducts product age studies as required by company's standard operating procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES Test syrup and water to ensure they meet KORE requirements. Understand mixing instructions and requirements. Inventory raw materials to prep for production. Utilize proper equipment and machinery including forklifts as required. Evaluate sanitation effectiveness and respond to emerging deficiencies. Set up equipment in preparation for use by manually lifting and moving equipment and/or chemicals and/or concentrates. Assess and rectify problems on all equipment. Read, understand and follow standard operating procedures. Conduct product testing as required by KORE. Oversight of calibration program. Conform with and abide by all regulations, policies, work procedures and processes. Adhere to good manufacturing practices and safety standards. JOB KNOWLEDGE, SKILLS AND ABILITIES Ability to operate various equipment. Ability to read and understand Material Safety Data Sheets. Ability to read, write, and keep records. Demonstrated attention to detail and accuracy. Adaptability - Ability to adapt to change in the workplace. Leadership - Ability to inspire and motivate others to perform well; accept feedback. Communication - Ability to effectively, clearly and concisely communicate verbally and in writing. Decision Making - Display willingness to make critical decisions while following company practices. Enthusiasm - Ability to bring energy to the day to day as well as long-term tasks and plans. Judgment - Display willingness to make timely decisions and exhibit sound and accurate judgment. Planning & Organizing - Ability to prioritize and plan work activities, use time efficiently and develop realistic action plans. Reliability - Demonstrate regular attendance and availability to staff and management. Safety & Security - Promote and personally observe safety and security procedures and uses equipment and materials property. Honesty, Trust & Respect - Must be seen as truthful and credible and exhibit respectful behavior in all actions representing the company. Training skills Requirements EDUCATION AND EXPERIENCE High School diploma or GED, minimum. Food or chemical industry work experience preferred. Forklift certification a plus. Strong analytical skills. Good computer skills including literacy with Microsoft Excel and Word. Familiarity with lab safety and handling of hazardous materials. TRAINING REQUIREMENTS New Hire Orientation Company's Inter-Active Safety Training Diversity & Harassment Training Spill training. PHYSICAL DEMANDS Work in a manufacturing environment; sustained posture in a standing position for prolonged periods of time. Work involves walking, talking and hearing, lifting over 50 lbs, and using hands to handle, feel or operate objects. Vision abilities required by this job include close vision and the ability to focus when using computer terminal. PERSONAL PROTECTIVE EQUIPMENT (PPE) As required with regard to hazardous materials and operations. May include protection from hazardous chemicals, cuts, or damage to hearing or vision. Hearing protection dependent on specified areas. Face shield and gloves mandatory while filling CO2. Hair nets if working on open container end of the lines. Safety glasses Steel/ceramic toed boots with slip resistant sole. WORK ENVIRONMENT The noise level in the work environment can be moderately high due to manufacturing and/or warehousing equipment in operation. Some areas are slippery due to the production process. Warehouse area has heavy forklift travel. This job description lists the major duties and requirements of the job and is not all-inclusive. Incumbent(s) may be expected to perform job-related duties other than those contained in this document and may be required to have specific job-related knowledge and skills. Coca-Cola Bottling Company High country is an Equal Opportunity/Affirmative Action Employer, requires pre-employment drug testing for all applicable positions and adheres to an Alcohol and Drug-Free Workplace. Salary Description $20.00 per hour

At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Impact The OSP Inspector plays a critical role in ensuring the safety, quality, and compliance of outside plant (OSP) infrastructure. By inspecting aerial, underground, and buried plant facilities and validating contractor work against industry and client standards, this role directly supports network reliability, public safety, and regulatory compliance. Accurate documentation, timely issue identification, and clear communication with internal teams and contractors help reduce rework, mitigate risk, and ensure projects are delivered to standard. Core Responsibilities Perform field inspections, audits, and corrections verification for OSP facilities, including: Aerial plant Underground and buried plant Conduct wooden pole ground-line inspections and assess pole conditions for compliance with standards. Verify contractor work complies with OSP Construction Standards and National Electric Safety Code (NESC) requirements. Document inspections, audits, and pole transfers electronically, including: Inspection findings Required corrections Compliance verification Perform documentation manually using printed spreadsheets when required. Utilize mapping and GPS tools to locate, track, and document facilities Communicate effectively with internal teams, contractors, and clients via email and mobile phone. Track inspection progress, follow up on corrective actions, and escalate non-compliance issues as needed. Manage time, travel, and inspection schedules efficiently, including short-notice travel. Support construction contractor oversight, ensuring corrective actions are completed accurately and on schedule. Core Requirements Required Qualifications Previous experience performing NESC inspections OR hands-on experience working on an aerial cable line crew. Experience conducting wooden pole ground-line inspections. Strong knowledge of OSP Construction Standards. Working knowledge of the National Electric Safety Code (NESC). Proficiency with computers and basic office software, including: Microsoft Windows Microsoft Excel (2003 or newer) Microsoft Outlook Comfortable using the internet and web-based systems. Strong communication skills, both written and verbal. Proven time management and organizational skills. Valid driver's license with the ability to travel on short notice. Experience inspecting underground and buried plant in addition to aerial facilities. Familiarity with mapping and GPS technologies. Experience with mapping tools such as Microsoft MapPoint (2009 or newer) preferred. Demonstrated construction contractor management or oversight experience. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30-$32 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at ************************

Minimum: Maximum: Location:Helena, MontanaJob Type:Part time Job Title:Night Patrol SpecialistJob Description: GENERAL PURPOSE: Drives around a specified geographic area to locate and report sign/lighting outages or other service issues by performing the following duties: ESSENTIAL DUTIES & RESPONSIBILITIES: Drive an automobile around a predetermined route to survey the repair and service needs of sign and lighting components Documents outages by taking pictures and notating other details per established procedures Locates signs on an area map, determines sign and lighting outage and/or sign service issues location and address Estimates size and characteristics of outage or service issue, and reports findings to supervisor. Relays information to other interested departments, store managers, and/or owners Determines and plans best traveling routes to ensure the specified geographic area is fully surveyed and best time management is utilized Maintains records and logbooks Performs cleaning, preventative, and operator maintenance on YESCO company vehicles if provided MARGINAL DUTIES & RESPONSIBILITIES Assists Night Patrol Supervisor with duties Draws maps to assist techs and contractors locate outages Delivers parts Performs other functions as necessary or as assigned NATURE OF WORK CONTACTS: Interacts daily with supervisor, service, and sales employees in the field and in the office to discuss observations of possible sales/service leads and/or service issues TRAINING & QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Less than high school education; or up to one-month related sign project experience or training; must have a state-issued driver's license in good standing; or any combination of education, experience, and training which provides the following knowledge, skills and abilities: Ability to read and comprehend simple instructions, correspondence, and memos Ability to write simple correspondence Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Ability to read, interpret, and apply safety rules, operating and maintenance instructions, and procedure manuals Ability to drive an automobile Ability to communicate in person Ability to see from a distance PHYSICAL/SENSORY DEMANDS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed in company-owned or personal vehicles. While performing the duties of this job, the employee is often required to sit; use a computer to enter data; use a telephone to converse with YESCO employees. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms, and talk or hear. The noise level in the work environment is usually moderate. Specific vision abilities include clarity of vision at a distance of 50 feet or more. We maintain a drug-free workplace. We do test for marijuana. Young Electric Sign Company is an EEO/AA employer. We welcome all qualified job seekers. Jobseekers will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or another legally protected status.

Mountain Ltd. has an opening for an OSP Inspector working in the Butte, MT area! Since 1979, Mountain Ltd. has successfully created and supported turnkey engineering solutions for traditional and wireless telecom providers across the United States. We are a national leader in the industry, providing high-quality engineering, on-time service delivery, and skilled personnel paired with innovative technology and creative solutions. Specialties include OSP/ISP engineering, design, permitting, right-of-way and CAD for traditional and wireless telecommunications companies. Overview: + 1. Monitor construction crews for compliance with client and jurisdictional requirements and specifications, including but not limited to cable/duct depth, separation and clearance requirements, labeling, grounding, node site construction, etc. Track and monitor any exceptions in depth. All data shall be recorded in client systems + Ensure job site(s) is clean and secure at the end of each day + Document and monitor quality instances that require remediation through full remediation. All data shall be recorded in CLIENT systems. + Manage remediation work resulting from customer complaints. All data shall be recorded in client systems + Document initial utility strike and report to client OSPC resource for proper distribution of notification, determine type and cause per client utility strike process and update status through final remediation of strike. All data shall be recorded in client systems. + Confirm and update HSR (hard surface restoration) type once captured by OSP construction contractor. If HSR is identified as pass through provide to client OSP resource for approval. All data shall be recorded in client systems. + Ensure that each SSR (Soft Surface Remediation) instance that cannot be fully remediated in 14 days window is captured and monitored to be fully repaired. All data shall be recorded in client systems + Document and understand change to construction that will result in design change and relay to OSPC for approval + Confirm and update cost adder change request once captured by OSP construction contractor. Send cost adder change request to client OSPC resource for approval. All data shall be recorded in client systems. Qualifications: + Underground telecom experience is a requirement. + Previous experience performing NESC inspections or experience working on an aerial cable line crew + Previous experience performing wooden pole ground line inspections. + Must be proficient in OSP Construction Standards + Familiarity with the National Electric Safety Code. + Computer experience: + Microsoft Windows XP, Excel 2003 or newer and Outlook + Experience with mapping tools such as Microsoft MapPoint 2009 or newer is preferred, but not required. + Familiar and comfortable with internet usage, and web page browsing. + Good communication skills. + Personal time management and organization skills. + Construction contractor management skills. + A valid driver's license and the ability to travel on short notice. Thank you for your interest in Mountain Ltd. For more career opportunities, please visit us at ******************* #M4 System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Quality Control Inspector Company: Loenbro - Industrial Services Group Reports To: Regional Quality Manager Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: We are looking for an experienced initiative-taking QC Inspector to join our growing Industrial Construction team. This position will be responsible for the duties listed below along with other related functions. A team-oriented mentality and the drive to continuously improve is what sets the Loenbro team at the top of the industry. This position works closely with related engineering, construction, fabrication, and other departments to ensure that the team's aligned goals are met. Employee will be expected to travel to remote jobs as needed throughout the intermountain region and possibly beyond Job Duties: * Weld Map Isometric drawings. * Enter welding and inspection information into tracking tools. * Assist with pressure testing plans and functions. * Review and File NDE/NDT Reports. * Work with NDE personnel for planning and execution of work. * Assemble and review project documentation packages. * Perform and document inspections based on drawings, specifications, and procedures to determine compliance. * Perform weld inspections. * Review welding requirements and ensure welding procedures comply. * Create and implement Project Quality Assurance Plans. * Provide support and training to other inspectors. * Write inspection and assess plans (I&TP's). * Committed to Loenbro's core values and safety policies. Skills/Qualifications: * Have a current AWS CWI or ASNT VT II or ability to pass the VT II exam. * Knowledge of NDT methods (UT, MT, PT, RT) with ASNT-SNT-TC-1A documented training/hands on hours. * Well-rounded with ASTM standards and materials. * Efficient in Microsoft Excel and Word. * Ability to communicate effectively with co-workers Quality Control Inspector. * Excellent interpersonal written and verbal communication skills. * Elevated level of organizational skills. * Extensive knowledge of reading and understanding drawings. * Must be a quick learner and motivated. * Ability to travel and relocate as needed. * Initiative-taking with the drive to learn and grow. * Must be able to work as a team. Essential Requirements: * Comply with all company policies and procedures. * Ability to work in a challenging environment. * Climbing up and down stairs and ladders while working on scaffolds and in trenches to access work. * Lifting up to 50 pounds. * Walking on uneven terrain for extended periods. * Standing for extended periods. * The use of respirators if required by projects Quality Control Inspector. * Driving if required to travel to and from locations. * Occasionally you may need to kneel, reach, or stoop. * If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Benefits * Personal Time Off (PTO). * Holidays: 6 paid holidays. * Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. * 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Job Description Avmax is looking to expand its workforce in Great Falls, MT. If you have the necessary experience and motivation to become a part of our team, please apply at ************** About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting: The Quality Control Inspector reports directly to the Quality Control Manager. Core Competencies: Communication Attention to detail Organization Professionalism Critical Thinking Key Performance Indicators / Duties & Responsibilities: Review all Major Repair Data and Progress on each project for completions and accuracy. Act as RII inspector for all Major Repairs. Planning of all Major Repairs. Report unserviceable maintenance equipment to their assigned Project Manager. Carry out inspections (MRB and Buyback) on aircraft following the applicable standards of airworthiness. Ensure that all reportable Service Difficulties and Irregularities are completed and forwarded to Quality Assurance & SMS in a timely manner. Attend training courses as directed by company management. Act as a receiving inspector for parts as required. Ensure parts are scrapped in accordance with Scrap Parts program on the approval the Project Manager or Customer's authority. Certify components repair by Avmax (e.g. batteries, cowling etc.) Ensure all defects being deferred have been done following proper procedures. Ensure material required for generated non-routines has been researched accurately and placed on order. Provide technical assistance or guidance to the crew. Communicate when tasks are complete so next trade can move onto the job. Ensure that all crew members' paperwork is up-to-date. Ensure work environment is safe and clean. Promote company values, vision, and mission. Certify aircraft for return to service. Qualifications: Certified A&P. Good knowledge of aviation regulations. Demonstrated ability to work well with other individuals throughout the organization. Possesses strong fundamental aircraft knowledge. Demonstrated capability and competency in field of expertise. Experience: 18 months experience in the field is preferred. Qualifications: Requirements include an A&P license, excellent oral and written communication skills, the ability to lift up to 50 lbs. NDT experience is preferred. Experience with CRJ 200/700, Dash 8, BAE 146, and/or EMB 120/135/145 is preferred. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. The employee will be required to; Occasionally lift 50 pounds Bend Stoop Kneel Crawl Climb ladders Stand for extended periods of time Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary. Our recruitment commitments: We thank all applicants for their interest; however, only those selected for an interview will be contacted. Depending on qualifications, selected candidates may be offered a role at a more appropriate level. Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan. Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA employer. We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups. Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Key Performance Indicators / Duties & Responsibilities: Review all Major Repair Data and Progress on each project for completions and accuracy. Act as RII inspector for all Major Repairs. Planning of all Major Repairs. Report unserviceable maintenance equipment to their assigned Project Manager. Carry out inspections (MRB and Buyback) on aircraft following the applicable standards of airworthiness. Ensure that all reportable Service Difficulties and Irregularities are completed and forwarded to Quality Assurance & SMS in a timely manner. Attend training courses as directed by company management. Act as a receiving inspector for parts as required. Ensure parts are scrapped in accordance with Scrap Parts program on the approval the Project Manager or Customer's authority. Certify components repair by Avmax (e.g. batteries, cowling etc.) Ensure all defects being deferred have been done following proper procedures. Ensure material required for generated non-routines has been researched accurately and placed on order. Provide technical assistance or guidance to the crew. Communicate when tasks are complete so next trade can move onto the job. Ensure that all crew members' paperwork is up-to-date. Ensure work environment is safe and clean. Promote company values, vision, and mission. Certify aircraft for return to service. Qualifications: Certified A&P. Good knowledge of aviation regulations. Demonstrated ability to work well with other individuals throughout the organization. Possesses strong fundamental aircraft knowledge. Demonstrated capability and competency in field of expertise. Experience: 18 months experience in the field is preferred. Qualifications: Requirements include an A&P license, excellent oral and written communication skills, the ability to lift up to 50 lbs. NDT experience is preferred. Experience with CRJ 200/700, Dash 8, BAE 146, and/or EMB 120/135/145 is preferred. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. The employee will be required to; Occasionally lift 50 pounds Bend Stoop Kneel Crawl Climb ladders Stand for extended periods of time Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary. Must be authorized to work in the USA.

The Quality Technician 1 is responsible for following procedures to ensure part and material conformance per specifications utilizing safety standards as required. Quality Technician 1 will demonstrate the ability to work with minimal supervision in multiple disciplines listed below in this description. Duties and Responsibilities Metrology Use lab equipment for gage calibration and auditing parts. Conduct heat treat testing per specification. Manage calibration recordkeeping and update records on system. Setup and operate Vision system to measure angles, lengths, radii, and center distances. Take appropriate corrective action for continuous quality improvement and customer satisfaction. Know and practice the 5 S's for industrial housekeeping. Operate lab equipment and gages properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned. Receiving Inspection Inspect all incoming material and parts per quality specification after being received in cell. Maintain receiving files and records per requirements. Place kanban cards on inspected material. Create and complete NCR's, SCAR's, and CAR's and enter information into computer. Perform workplace audits with documented results. Set up and operate gages to accurately inspect material and parts. Control scrapped or rejected parts until disposition is determined. Perform preventative maintenance as required. Take appropriate corrective action for continuous quality improvement and customer satisfaction. Know and practice the 5S's for industrial housekeeping. Operate tools, and equipment properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned Heat Treat Preparation of test samples through a process of polishing and chemical activation of sample surface. Set up and operation of gages to accurately inspect material hardness and micro-hardness. Creation of test samples through the use of specialized cutting equipment. Maintain files and records per requirements. Take appropriate corrective action for continuous quality improvement and customer satisfaction. Know and practice the 5S's for industrial housekeeping. Operate tools, presses and equipment properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned. Auditing Conduct recon tools, accessories packaging, and accessories manufacturing audits daily utilizing print and process control plan specifications. Disassemble and analyze product during the performance of a teardown audit. Perform Process Control Plan audits when required. Investigate and use SPC tools for problem solving failures and rejects. Maintain and complete proper records and documentation. Take appropriate corrective action for continuous quality improvement and customer satisfaction including NCR, SCAR, and CAR databases for non-conforming product. Use gauges and other equipment to measure tolerances and dimensions of parts per specifications. Know and practice the 5S's for industrial housekeeping. Operate tools, and equipment properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned. Battery Warranty Analysis Conduct warranty analysis on batteries returned from Authorized Service Centers and Authorized Distributors per the Battery Return Policies currently in place. Maintain and complete proper records and documentation. Prepare batteries for recycling once they have been evaluated. Know and practice the 5S's for industrial housekeeping. Able to react to change effectively and handle other tasks as assigned. Education/ Requires an education equivalent to high school diploma or GED. Technical certification is preferred Experience Quality assurance or quality control experience preferred. Experience reading prints and using gages required. Vendor/supplier relations experience helpful. Knowledge Required Computer experience and experience using SPC techniques helpful. Excellent organizational skills required. Ability to perform work per instructions with minimal supervision, and within reasonable time Milwaukee Tool is an equal opportunity employer.

At Lumibird Photonics USA, you'll be part of a team that delivers cutting-edge laser technology to global customers in research, defense, medical, and industrial markets. You'll play a vital role in ensuring every product that leaves our facility meets the highest standards of precision and performance. JOB SUMMARY: The Quality Technician is responsible for ensuring that incoming components and outgoing laser systems meet Lumibird's quality standards and customer requirements. This position plays a key role in maintaining product reliability and compliance through careful inspection and documentation. ESSENTIAL FUNCTIONS: * Incoming inspection of mechanical, optical, and electrical components. * Verify recieved materials against component specifications. * Utilize precision measurement tools such as calipers. * Record inspection results accurately and initiate nonconformance reports when applicable. * Interface with suppliers when discrepancies/deviations are found and support corrective actions for reocurring issues. * Outgoing final inspection of laser systems. * Conduct final inspection and verification of completed laser systems prior to shipment. * Review test data, build documentation, and serial number traceability records for completeness and accuracy. * Ensure labeling and documentation meet internal and customer-specific requirements. * Participate in the Internal Quality Audit Program, with audits occurring throughout the year. * Data entry in Enterprise Resource Planning (ERP) system. * Engineering Change Notice (ECN) / Revision control * Training records * Nonconforming Material (NCM) records * Equipment calibration records * Create and revise work instructions for manufacturing processes. * Manage routine maintenance for non-calibrated equipment such as electrostatic discharge (ESD) equipment, Clean Dry Air, HEPA filters, UV Ovens, Environmental Chambers, etc. * Support Foreign Object Detection (FOD) and 5S Programs. * Encourage and support corporate best practices, promoting quality culture and continuous improvement. * Other duties as assigned. QUALIFICATIONS: * Working knowledge of Microsoft software packages such as WORD, EXCEL, OUTLOOK and PowerPoint. * Familiarity with component inspection tools such as calipers. * Strong verbal, and written, communication skills. * Exceptional attention to detail. * This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. NON-ESSENTIAL DESIRED QUALIFICATIONS: * Familiarity with ISO 13485, ISO 9001, and AS9100. * Bilingual in French/English. * Experience in manufacturing. PHYSICAL REQUIREMENTS: * Must be capable of working in front of a computer for long periods of time. * Must be able to stand and sit for extended periods of time. * Ability to lift up to 50 lbs. * Ability to use fingers and hands to manipulate small parts. * Excellent vision is required to perform job. Lumibird Photonics USA Inc. is an Equal Opportunity Employer We consider applicants for all positions on the basis of qualifications and without regard to race, color, religion, sex, national origin, gender, marital status, veteran status, disability, sexual orientation and any other legally protected status. ELECTRONIC SIGNATURE: By using this electronic application, you agree to use an electronic signature in lieu of a paper-based signature. You understand that electronic signatures are just like signing any document and that it is legally binding in the United States and in other countries. You consent and agree that the use of a key pad, mouse or other device to select an item, button, icon or similar act/action while using any electronic service offered; or in accessing or making any transactions regarding any agreement, acknowledgement, consent, terms, disclosures or conditions constitutes your signature, acceptance and agreement as if it were actually signed by you in writing.

Nature of Work The Quality Control Foreman oversees asset management, inspections, and quality control of all street maintenance, construction, snow and ice control, and contractor-performed work within the City's right-of-way. The role emphasizes safety leadership, ensures compliance with City and regulatory standards, and requires advanced technical and computer skills, including Microsoft Office. Provides technical guidance and direction to City crews while maintaining proficiency in inspections, recordkeeping, permit tracking, data analysis, and reporting. Work is performed under the general direction of the Street Division Manager and Street Division Superintendent. Essential Functions of Work * Provides daily work direction, technical guidance, and logistical support to City crews, fostering effective teamwork, adherence to best practices, and compliance with City Standard Operational Procedures. * Oversees quality control and inspections for all street construction, maintenance, pavement preservation, and snow/ice control, ensuring contractor compliance, adherence to City specifications, and safety standards. * Performs data entry for task orders, permits, warranties, and condition inspections using asset management software (e.g., Cartegraph), ensuring accurate record-keeping and reporting. * Utilizes spreadsheets, word processing, and reporting tools to track, analyze, and communicate project performance, progress, and resource requirements. * Receives and responds to customer complaints and inquiries in a professional, timely, and solution-oriented manner. * Operates a wide variety of heavy equipment with advanced skill to maintain, repair, and construct streets, including performing snow and ice control, while ensuring safety, equipment upkeep, and efficient work. Education and Experience * High school diploma or equivalent. * Minimum of ten (10) years of experience in street maintenance and heavy equipment operation, including at least five (5) years in a lead or advanced role. NECESSARY SPECIAL QUALIFICATIONS * Possession of a valid Class A Commercial Montana Driver's (CDL) license with Air Brake and Tanker endorsement or the ability to obtain one within 6 months of employment. * Must meet Federal Motor Carriers Safety Administration (FMCSA) Clearinghouse requirements. * Pavement Inspection Certification Modules 1, 5, 6, 7, and 8 within 6 months of employment. As of January 6, 2020, employers of CDL drivers must query the Clearinghouse to verify that a current or prospective driver is not prohibited from operating CMVs or performing other safety sensitive functions. CDL Drivers must now be registered with the FMCSA Clearinghouse. For more information, please visit the website at ************************************ Requirements of Work * Extensive knowledge of computers, including typing, email communication, spreadsheets, databases, word processing, and online research. * Substantial knowledge of construction and maintenance practices, materials, and snow/ice control methods. * Ability to communicate effectively both written and verbally to peers, management, and customers on a daily basis. * Supports operational requirements and sustains routine, emergent, and essential City services through proactive problem-solving, effective resource management, and strict adherence to safety practices. * Ability to provide technical guidance, dispatching, and inspection of both City staff and contractors. * Extensive knowledge of Street Overall Condition Index Score, inspections, and asset management programs (Cartegraph). * Ability to prepare accurate reports and maintain organized records. * Must have working knowledge of survey and grade setting equipment. CORE COMPETENCIES * Safety Awareness * Decision making * Problem Solving * Teamwork * Communication * Customer Service * Conflict resolution * Organizational Skills * Technical Capacities SUPERVISORY RESPONSIBILITY While not exercising formal supervisory authority, this position leads through technical expertise, providing daily direction, quality oversight, and inspection of City crews and contractors working within the City Right-of-Way. WORK ENVIRONMENT Work is performed in an office and outdoor environment. While performing the duties of this job, the employee is exposed to cold, heat, snow, ice, wind, and rain. Employees are provided personal protective equipment and are required to follow standard operating guidelines to prevent exposure to hazards. PHYSICAL DEMANDS While performing the duties of this job, the employee is frequently required to stand, walk, sit, crawl, bend, twist, kneel, reach, grasp, pick, pinch, push, pull, ride, climb and perform similar body movements. Must have the ability to perform heavy physical work and to occasionally lift and carry up to 100 pounds at a time; the possession of hand/eye coordination sufficient to operate Street maintenance equipment, hand tools, and a motor vehicle; the ability to talk and hear in person or by telephone or two-way radio; and the ability to see and read dials, instructions and reports. EXPECTED HOURS OF WORK The work week is Sunday through Saturday. Work is typically performed during a 40-hour work schedule, Monday through Friday. Schedule involves mandatory shift work to include nights, overtime, weekends and holidays. This position is a non-exempt and eligible for overtime which must be approved by the supervisor prior to working. Employees are expected to report to work on time, fully prepared for scheduled workdays. TRAVEL Travel is primarily local during the business day. Occasional travel may be required to attend off-site training and educational opportunities.

QA Inspector ***Work Location: Grand Forks, ND ( Grand Forks AFB)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Observes and investigates construction phases for compliance with schedules, specifications, and shop drawings. Identifies problems, recommends changes, and assesses the need for contract modifications. Performs inspections and completes daily site reports in RMS. Include comments and monitoring of progress, work activities, safety issues and subcontractor manpower in the reports. Assists in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and assists with preparation of contract modification documentation. Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Participates and executes RFI and Submittal reviews, including coordination with the designers, RE, and technical experts and executes responses to the contractor. Logs and maintains data as necessary to assist with project management and decision making. Performs other duties as assigned Education/Experience: High School Diploma/GED minimum; Construction related degree, preferred Minimum of 5 years of applicable experience on construction projects large complex multimillion dollar federal projects, Department of Defense or USACE preferred Experience using RMS 3.0, preferred Experience with three-phase inspection process Experience with OSHA and EM 385-1-1 USACE Safety Manual, preferred Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Impact The OSP Inspector plays a critical role in ensuring the safety, quality, and compliance of outside plant (OSP) infrastructure. By inspecting aerial, underground, and buried plant facilities and validating contractor work against industry and client standards, this role directly supports network reliability, public safety, and regulatory compliance. Accurate documentation, timely issue identification, and clear communication with internal teams and contractors help reduce rework, mitigate risk, and ensure projects are delivered to standard. Core Responsibilities Perform field inspections, audits, and corrections verification for OSP facilities, including: Aerial plant Underground and buried plant Conduct wooden pole ground-line inspections and assess pole conditions for compliance with standards. Verify contractor work complies with OSP Construction Standards and National Electric Safety Code (NESC) requirements. Document inspections, audits, and pole transfers electronically, including: Inspection findings Required corrections Compliance verification Perform documentation manually using printed spreadsheets when required. Utilize mapping and GPS tools to locate, track, and document facilities Communicate effectively with internal teams, contractors, and clients via email and mobile phone. Track inspection progress, follow up on corrective actions, and escalate non-compliance issues as needed. Manage time, travel, and inspection schedules efficiently, including short-notice travel. Support construction contractor oversight, ensuring corrective actions are completed accurately and on schedule. Core RequirementsRequired Qualifications Previous experience performing NESC inspections OR hands-on experience working on an aerial cable line crew. Experience conducting wooden pole ground-line inspections. Strong knowledge of OSP Construction Standards. Working knowledge of the National Electric Safety Code (NESC). Proficiency with computers and basic office software, including: Microsoft Windows Microsoft Excel (2003 or newer) Microsoft Outlook Comfortable using the internet and web-based systems. Strong communication skills, both written and verbal. Proven time management and organizational skills. Valid driver's license with the ability to travel on short notice. Experience inspecting underground and buried plant in addition to aerial facilities. Familiarity with mapping and GPS technologies. Experience with mapping tools such as Microsoft MapPoint (2009 or newer) preferred. Demonstrated construction contractor management or oversight experience. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30-$32 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at ************************

Mountain Ltd. has an opening for an OSP Inspector working in the Helena, MT area! Since 1979, Mountain Ltd. has successfully created and supported turnkey engineering solutions for traditional and wireless telecom providers across the United States. We are a national leader in the industry, providing high-quality engineering, on-time service delivery, and skilled personnel paired with innovative technology and creative solutions. Specialties include OSP/ISP engineering, design, permitting, right-of-way and CAD for traditional and wireless telecommunications companies. Overview: + Monitor construction crews for compliance with client and jurisdictional requirements and specifications, including but not limited to cable/duct depth, separation and clearance requirements, labeling, grounding, node site construction, etc. Track and monitor any exceptions in depth. All data shall be recorded in client systems + Ensure job site(s) is clean and secure at the end of each day + Document and monitor quality instances that require remediation through full remediation. All data shall be recorded in CLIENT systems. + Manage remediation work resulting from customer complaints. All data shall be recorded in client systems + Document initial utility strike and report to client OSPC resource for proper distribution of notification, determine type and cause per client utility strike process and update status through final remediation of strike. All data shall be recorded in client systems. + Confirm and update HSR (hard surface restoration) type once captured by OSP construction contractor. If HSR is identified as pass through provide to client OSP resource for approval. All data shall be recorded in client systems. + Ensure that each SSR (Soft Surface Remediation) instance that cannot be fully remediated in 14 days window is captured and monitored to be fully repaired. All data shall be recorded in client systems + Document and understand change to construction that will result in design change and relay to OSPC for approval + Confirm and update cost adder change request once captured by OSP construction contractor. Send cost adder change request to client OSPC resource for approval. All data shall be recorded in client systems. Qualifications: + Underground telecom experience is a requirement. + Previous experience performing NESC inspections or experience working on an aerial cable line crew + Previous experience performing wooden pole ground line inspections. + Must be proficient in OSP Construction Standards + Familiarity with the National Electric Safety Code. + Computer experience: + Microsoft Windows XP, Excel 2003 or newer and Outlook + Experience with mapping tools such as Microsoft MapPoint 2009 or newer is preferred, but not required. + Familiar and comfortable with internet usage, and web page browsing. + Good communication skills. + Personal time management and organization skills. + Construction contractor management skills. + A valid driver's license and the ability to travel on short notice. Thank you for your interest in Mountain Ltd. For more career opportunities, please visit us at ******************* #M4 System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Avmax is looking to expand its workforce in Great Falls, MT. If you have the necessary experience and motivation to become a part of our team, please apply at ************** About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting: The Quality Control Inspector reports directly to the Quality Control Manager. Core Competencies: Communication Attention to detail Organization Professionalism Critical Thinking Key Performance Indicators / Duties & Responsibilities: Review all Major Repair Data and Progress on each project for completions and accuracy. Act as RII inspector for all Major Repairs. Planning of all Major Repairs. Report unserviceable maintenance equipment to their assigned Project Manager. Carry out inspections (MRB and Buyback) on aircraft following the applicable standards of airworthiness. Ensure that all reportable Service Difficulties and Irregularities are completed and forwarded to Quality Assurance & SMS in a timely manner. Attend training courses as directed by company management. Act as a receiving inspector for parts as required. Ensure parts are scrapped in accordance with Scrap Parts program on the approval the Project Manager or Customer's authority. Certify components repair by Avmax (e.g. batteries, cowling etc.) Ensure all defects being deferred have been done following proper procedures. Ensure material required for generated non-routines has been researched accurately and placed on order. Provide technical assistance or guidance to the crew. Communicate when tasks are complete so next trade can move onto the job. Ensure that all crew members' paperwork is up-to-date. Ensure work environment is safe and clean. Promote company values, vision, and mission. Certify aircraft for return to service. Qualifications: Certified A&P. Good knowledge of aviation regulations. Demonstrated ability to work well with other individuals throughout the organization. Possesses strong fundamental aircraft knowledge. Demonstrated capability and competency in field of expertise. Experience: 18 months experience in the field is preferred. Qualifications: Requirements include an A&P license, excellent oral and written communication skills, the ability to lift up to 50 lbs. NDT experience is preferred. Experience with CRJ 200/700, Dash 8, BAE 146, and/or EMB 120/135/145 is preferred. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. The employee will be required to; Occasionally lift 50 pounds Bend Stoop Kneel Crawl Climb ladders Stand for extended periods of time Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary. Our recruitment commitments: We thank all applicants for their interest; however, only those selected for an interview will be contacted. Depending on qualifications, selected candidates may be offered a role at a more appropriate level. Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan. Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA employer. We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups. Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening.

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to thrive and deliver your best. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Learn more about our story HERE. Your Role: The Quality Technician is responsible for following procedures to ensure part and material conformance per specifications utilizing safety standards as required. Quality Technician 1 will demonstrate the ability to work with minimal supervision in multiple disciplines listed below in this description. Duties and Responsibilities: Metrology · Use lab equipment for gage calibration and auditing parts. · Conduct heat treat testing per specification. · Manage calibration recordkeeping and update records on system. · Setup and operate Vision system to measure angles, lengths, radii, and center distances. · Take appropriate corrective action for continuous quality improvement and customer satisfaction. · Know and practice the 5 S's for industrial housekeeping. · Operate lab equipment and gages properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Receiving Inspection · Inspect all incoming material and parts per quality specification after being received in cell. · Maintain receiving files and records per requirements. · Place kanban cards on inspected material. · Create and complete NCR's, SCAR's, and CAR's and enter information into computer. · Perform workplace audits with documented results. · Set up and operate gages to accurately inspect material and parts. · Control scrapped or rejected parts until disposition is determined. · Perform preventative maintenance as required. · Take appropriate corrective action for continuous quality improvement and customer satisfaction. · Know and practice the 5S's for industrial housekeeping. · Operate tools, and equipment properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Heat Treat · Preparation of test samples through a process of polishing and chemical activation of sample surface. · Set up and operation of gages to accurately inspect material hardness and micro-hardness. · Creation of test samples through the use of specialized cutting equipment. · Maintain files and records per requirements. · Take appropriate corrective action for continuous quality improvement and customer satisfaction. · Know and practice the 5S's for industrial housekeeping. · Operate tools, presses and equipment properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Auditing · Conduct recon tools, accessories packaging, and accessories manufacturing audits daily utilizing print and process control plan specifications. · Disassemble and analyze product during the performance of a teardown audit. · Perform Process Control Plan audits when required. · Investigate and use SPC tools for problem solving failures and rejects. · Maintain and complete proper records and documentation. · Take appropriate corrective action for continuous quality improvement and customer satisfaction including NCR, SCAR, and CAR databases for non-conforming product. · Use gauges and other equipment to measure tolerances and dimensions of parts per specifications. · Know and practice the 5S's for industrial housekeeping. · Operate tools, and equipment properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Battery Warranty Analysis · Conduct warranty analysis on batteries returned from Authorized Service Centers and Authorized Distributors per the Battery Return Policies currently in place. · Maintain and complete proper records and documentation. · Prepare batteries for recycling once they have been evaluated. · Know and practice the 5S's for industrial housekeeping. · Able to react to change effectively and handle other tasks as assigned. Education · Requires an education equivalent to high school diploma or GED. · Technical certification is preferred Experience · Quality assurance or quality control experience preferred. · Experience reading prints and using gages required. · Vendor/supplier relations experience helpful. Knowledge Required · Computer experience and experience using SPC techniques helpful. · Excellent organizational skills required. · Ability to perform work per instructions with minimal supervision, and within reasonable time. Milwaukee Tool is an equal opportunity employer. Shift hours: 1st-7am-3pm; 2nd shift-3pm-11pm; 3rd shift 11pm-7am Milwaukee Tool is an equal opportunity employer.

QA Inspector ***Work Location: Grand Forks, ND ( Grand Forks AFB)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Observes and investigates construction phases for compliance with schedules, specifications, and shop drawings. Identifies problems, recommends changes, and assesses the need for contract modifications. Performs inspections and completes daily site reports in RMS. Include comments and monitoring of progress, work activities, safety issues and subcontractor manpower in the reports. Assists in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and assists with preparation of contract modification documentation. Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Participates and executes RFI and Submittal reviews, including coordination with the designers, RE, and technical experts and executes responses to the contractor. Logs and maintains data as necessary to assist with project management and decision making. Performs other duties as assigned Education/Experience: High School Diploma/GED minimum; Construction related degree, preferred Minimum of 5 years of applicable experience on construction projects large complex multimillion dollar federal projects, Department of Defense or USACE preferred Experience using RMS 3.0, preferred Experience with three-phase inspection process Experience with OSHA and EM 385-1-1 USACE Safety Manual, preferred Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Impact The OSP Inspector plays a critical role in ensuring the safety, quality, and compliance of outside plant (OSP) infrastructure. By inspecting aerial, underground, and buried plant facilities and validating contractor work against industry and client standards, this role directly supports network reliability, public safety, and regulatory compliance. Accurate documentation, timely issue identification, and clear communication with internal teams and contractors help reduce rework, mitigate risk, and ensure projects are delivered to standard. Core Responsibilities Perform field inspections, audits, and corrections verification for OSP facilities, including: Aerial plant Underground and buried plant Conduct wooden pole ground-line inspections and assess pole conditions for compliance with standards. Verify contractor work complies with OSP Construction Standards and National Electric Safety Code (NESC) requirements. Document inspections, audits, and pole transfers electronically, including: Inspection findings Required corrections Compliance verification Perform documentation manually using printed spreadsheets when required. Utilize mapping and GPS tools to locate, track, and document facilities Communicate effectively with internal teams, contractors, and clients via email and mobile phone. Track inspection progress, follow up on corrective actions, and escalate non-compliance issues as needed. Manage time, travel, and inspection schedules efficiently, including short-notice travel. Support construction contractor oversight, ensuring corrective actions are completed accurately and on schedule. Core Requirements Required Qualifications Previous experience performing NESC inspections OR hands-on experience working on an aerial cable line crew. Experience conducting wooden pole ground-line inspections. Strong knowledge of OSP Construction Standards. Working knowledge of the National Electric Safety Code (NESC). Proficiency with computers and basic office software, including: Microsoft Windows Microsoft Excel (2003 or newer) Microsoft Outlook Comfortable using the internet and web-based systems. Strong communication skills, both written and verbal. Proven time management and organizational skills. Valid driver's license with the ability to travel on short notice. Experience inspecting underground and buried plant in addition to aerial facilities. Familiarity with mapping and GPS technologies. Experience with mapping tools such as Microsoft MapPoint (2009 or newer) preferred. Demonstrated construction contractor management or oversight experience. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30-$32 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at ************************

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to provide technical solutions on our Manufacturing Quality Team. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Year after year, our team continues to make significant breakthroughs in the industry. We're just getting started. To learn more about our story click HERE. Your Role on Our Team The Quality Technician II will be responsible for ensuring the quality of all products produced meet agreed upon standards and expectations. The Quality Technician II will demonstrate the ability to put people and process first at all times to ensure Milwaukee Tool's unwavering devotion to a robust quality culture. This position is the standard bearer for who we are and the obsession we have with being the market leader. A Quality Technician II is charged with overseeing the quality, safety, productivity, and training linked within their assigned team. The ability to effectively communicate to the team is crucial to the continued success and development of the personnel and equipment managed. Through resourcing of timely product inspections, and directing of plant quality technicians, the Quality Technician II position is tasked with the short- and long-term success of the Manufacturing Quality Team. Shift: 2nd Shift, Monday-Friday 3:00-11:00pm You'll be DISRUPTIVE through these duties and responsibilities: Key contributor of the manufacturing quality assurance organization by performing daily audits of the manufacturing process to ensure all products and processes are abiding by the specifications and standards set by the leadership teams User of test lab equipment such as tensile/torsion testers, hardness testers, metallurgical equipment (cut/mount/polish, optical and stereo microscopes), and other various test equipment Operate CMM and VMM measuring machines and user of handheld devices such as calipers, micrometers, height/snap/pin gauges and other various devices to support metrology needs Initiate Quality System documentation, such as Inspections, Non-Conforming Material Reports (NCMR's), quality alerts Contribute to the creation of work instructions Complete dimensional inspections of incoming raw material Ability to navigate document repository web page to locate inspection reports, blueprints and other quality documents Participate in gage R&R studies as needed Mentor Quality Technician I personnel and provide guidance to manufacturing operators Effectively communicate across shifts and weekend work within internal teams and cross-functional teams Support Operator instruction/ training on new procedures or techniques Perform basic math; fraction to decimal conversion, arithmetic and units of measure conversion, and basic statistics Consciously abide by all safety policies and procedures to create a safe working environment Other duties as assigned The TOOLS you'll bring with you: High School or GED diploma 2+ years of previous quality experience or 5+ years of manufacturing experience Basic understanding of Microsoft Office Suite, Excel and Microsoft Outlook Excellent oral and written communication skills Ability to navigate technology such as computer, tablet and printer systems Ability to work independently and as part of a team Ability to read blueprints Problem solving abilities, interpersonal skills, and the ability to manage interruptions Proven hands-on skills and ability to follow detailed instructions is a huge plus Other TOOLS we prefer you to have: Understanding of metrology fundamentals, GD&T We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site food and coffee service And many more, check out our benefits site HERE Milwaukee Tool is an equal opportunity employer.