Quality control inspector jobs in Houston, TX

As a Quality Inspector, you'' be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Specialist, you will be responsible for: + Inspecting parts, assemblies and subassemblies to required drawings and prints. + Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. + Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. + Initiating corrective action requests when conditions adverse to quality are repetitive in nature. + Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems + Completing, inspecting and distributing all quality records and documents and performing specialized testing as required + Verifying tests as required on all components and completed assemblies. + 1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. + Candidate will start on day shift due to training then move to nights. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Quality Control CMM Inspector (Night Shift) Shift: Night Shift (Monday - Thursday 4:30PM-3:00AM 10 hr. shift) As a Quality Inspector, you will play a crucial role in ensuring that our products meet or exceed customer specifications and quality standards. You will be responsible for inspecting machined parts, identifying defects, and verifying compliance with engineering drawings and the necessary part numbers and traceability numbers. Job Responsibilities: Perform in-process and final inspections on valve components, machined parts and detailed final assemblies. Perform receiving inspection on incoming product. Proficient in visual and dimensional inspections using all inspection tools for granite plate inspection. Interpret drawings, certifications, and industry specifications. The ability to apply GD&T. Trains and mentors less experienced inspectors. Create inspection reports and maintain accurate records of inspections and findings. Collaborate with production teams to address quality issues and provide feedback for process improvement. Performs other duties as assigned. Follow company instruction in record management including calibration, inspection, and test report. Able to lift to 50 pounds occasionally and be able to use forklift equipment Job requires walking through the campus 80% of time during shift, may be exposed to elements. May perform any other work-related functions as deemed necessary and appropriate by immediate supervisor or manager, as directed. . Skills & Abilities: Ability to interpret mechanical drawings of components and assemblies Knowledge of Geometric Dimensioning and Tolerancing (GDT) required Ability to read and interpret standards and specifications such as ASME, ANSI, NACE, etc. Proficient in MS Office Suite specifically MS Excel, and experience with ERP/MRP systems. Ability to work in a team-oriented environment that is fast paced and demanding. Must be self-directed, have excellent initiative and organizational skills. Exhibits a strong ability to handle multiple demands with a sense of urgency, drive, and energy. Works well meeting multiple deadlines with the ability to deliver on time. Excellent written and verbal communications skills. Core Qualifications: High School diploma or equivalent required. Minimum of five years QC inspection experience of raw material, machined parts, coating, and review of inspection and testing documentations. Minimum of 3 years of experience working in a machining and assembly environment Candidate must have Portable CMM (Faro, Romer) and/or Stationary CMM experience preferred Experience with nonconforming material control and ability to follow company specific instructions and directions. Experience with equipment calibration program. Experience with the review and approval of Certified Material Test Reports with respect to internal and national material specifications/standards. Experience with evaluation for acceptance of inspection and testing reports including Certificate of Conformance, Coating, Welding, Hardness Test, Heat Treat, Liquid Penetrant, Magnetic Particle Testing, Ultrasonic Testing, and Radiographic Testing.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with Baker Hughes global standards. This is for a third shift position (9pm-5: 30am). Training will be on the first and second shifts until training is complete (training timeframe dependent on competencies) -(1st)5am-1: 30pm and (2nd)-1pm-9: 30pm. The plant runs 24/7 so they need coverage 7 days a weeks. The inspector will work a 8 hour shift for 4 to 6 days a week, as dictated by necessity of the plant. Must be available to work weekends, as necessary. Key responsibilities: •Inspecting parts, assemblies and subassemblies to required drawings and prints •Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. •Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. •Initiating corrective action requests when conditions adverse to quality are repetitive in nature. •Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems •Completing, inspecting and distributing all quality records and documents and performing specialized testing as required •Verifying tests as required on all components and completed assemblies. •1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. •Candidate will start on day shift due to training then move to nights. Skills & Competencies: •Be able to read and correctly interpret prints / drawings and specifications •Display understanding of defects, problem-solving skills or an enthusiasm to learn and develop your skill set in a hands-on environment •Have excellent communication skills and the ability to be a valuable team player Work Environment: •Fast paced and noisy environment with constant movement. •Regular lifting and/or moving up to to 50 lbs. Qualifications: •Have a High School Diploma or equivalent level of education •Demonstrate proven experience in a Quality Technician or Inspection role Shifts: •2nd shift: Monday -Friday from 3pm - 3am (12 hour shift for 4 to 6 days a week) •Must be able to work some weekends

Job Description Reports to: Quality Control Manager Shift: Mondays - Thursdays 3pm to 1:30am Primary Responsibility: This position is responsible for product quality of the complete MIRATECH product line, in the Houston, Texas What You'll Do: Dimensional Inspection to verify the product matches the sales drawing. This inspection would include but not limited to the following. Diameter, Overall Length, Nozzle Projection, Nozzle Orientation, Test Ports, Couplings, Drains, Etc. Weld Inspection to verify all welding meets or exceeds the weld details on the fabrication drawings. This inspection would include but not limited to. Weld Profile, Weld Size, Weld Length, Porosity, Cracks, Undercut, Inclusions, Excessive Spatter, Etc. Visual Inspection to verify that the finished product meets the overall standards of MIRATECH. This inspection would include but not limited to the following. Paint Defects, Deformation, Defects, Tagging, Labeling, Etc. Labeling / Tagging - verify that all the products all labeled, marked, or tagged with the correct job number and stock code. Maintain job travelers in job packets, inspection reports, test and quality checks. Report any defects, issues, or non-conformities to the Quality Control Manager. Assist with 3rd Party Inspections that are coordinated through the Quality Control Manager. Inspect raw materials in the Non-Conformance Department to verify the following match the Material Traceability Report (MTR) provided by the vendor; Thickness, Specification, Grade, Heat Number, Slab Number, Etc. Calibrate inspection and testing equipment to ensure accuracy and reliability. Ensure that all safety standards are adhered to during inspections and testing. Communicates with other QC Inspectors and takes ownership and initiative. How to Qualify: High school diploma Blueprint interpretation Using measuring tools such as tape measure, micrometer, level, fillet weld gauges, etc. Experience with steel fabrication and welding. Experience with quality related procedures and processes. English and Spanish speaker (preferred). Communication and interpersonal skills to liaise with quality control manager, production supervisor, direct laborers, and cross-functional teams. What's In it For You: Health, Dental & Vision Insurance Annual Bonus Program $350 Annual Wellness Credit Flexible Spending Account (FSA) 401k with match up to 5% Life insurance Disability insurance 4 days of paid sick leave annually 12 days PTO annually (prorated based on start date) $350 Production Reimbursement Program Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. Job Posted by ApplicantPro

Job Description Key Activities and Accountabilities Perform inspection (visual, dimensional, gauging and comparison as appropriate) on new manufactured, repaired and modified equipment and components pre, during and post qualification testing Raise Non-conformance Reports against non-conforming equipment / components and manufacturing, repair, modification quality records Work in accordance with Goods Inwards Quality Procedures Ensure inspection measuring equipment is kept safe, clean, fit for purpose and in current calibration Perform inspection surveys on returned operational equipment (Rosehill Resource and Customer owned) Perform Quality Control checks to Operations Support processes at key stages (i.e. prior to final shipment, job card completion etc.,) Perform Non Destructive Testing on components for certification purposes Witness pressure testing of equipment for certification to ensure that the tests are conducted to the required standards Job Knowledge and Qualifications Experience in a similar role - inspection of mechanical components & assemblies Trained and Experienced Internal Quality Auditor would be an advantage Good knowledge of workshop procedures and practices Knowledge of Risk Assessment/Job Card/Engineering Test Procedure compliance Able to display quality control/certification techniques Knowledge of MS Office (Excel, Word, Outlook & Teams) Ability to read and interpret drawings & technical documentation

(Temp-to-Hire) Also referred to as DPI or DUPRO Start: 9/29/2025 Pay: Starting at $17.00-$19.00 Day Shift: 4am-4pm Night Shift: 4pm-4am 5-6 days/ week Looking for a quality inspectors to conduct inspections while production is underway. This would be ideal for someone with 1-2+ years' production experience of very minimal quality control experience. Must pass background check and drug screen. High School Diploma or GED. Some experience using micrometers, calipers, and gauges. Experience with coupling, pipe, and threading is a plus. This position is in a non-climate controlled manufacturing facility. Please send resumes to [email protected] and put QW in subject.

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: * Micrometers * Calipers * Pin/Plug Gages * Ring Gages * Go/No Go Gages * Height Gages * Profile Projectors * Profilometers * Surface Plates * Reading and interpretation of engineering drawings and specifications. * Computer skills, including familiarity with Microsoft Word and Excel. * Strong communication skills, both verbal and written. * Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. * Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: * Setup all hand tools readily accessible to the job being performed * Review work order packet for job to verify correct product is to be produced * Assure Log Sheets are correct for the product to be produced * Coordinate with the Gage Lab for proper gages to measure product * Assure gages are mastered and set as required before production starts, as well as during production operation as required * Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer * Identify all rejected product on Digital Log Sheet and describe reason * Identify all rejected physical product as per instructions and alert operator * Assure all First and Last Article inspection is conducted as required * Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection * Assure that material for order is correct as described on the work order * Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments * Quality minded individual with a dedication to superior products * Follow all applicable work instructions, specifications, and requirements * Assist in training of inexperienced inspectors * Follow all Company Rules, Procedures and Policies * Follow all Company Safety Rules * Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: * 1 year experience as production operator/or previous experience as QC inspector in previous company * Working knowledge of blueprint reading and basic math. * Must be fluent in English, with the ability to read, write, and communicate effectively. * Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: * High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: * Teamwork * Adaptability * Accountability * Reliability/dependability * Initiative * Safety awareness * Ability to receive and provide constructive feedback * Pride in performance * Continuous Improvement/Quality * Communication * Positive responses to change * High attention to detail

Job DescriptionQC Inspector - 77073 Night Shift: 5:00 PM - 5:30 AMDays: Monday - FridayFlexibility Required: Must be open to working weekends as needed Pay: Based on Experience Position OverviewThe Quality Control (QC) Inspector is responsible for inspecting manufactured or processed products to ensure compliance with customer contract specifications, internal quality standards, and regulatory requirements. This role focuses on dimensional accuracy, tolerances, hardness, and overall product quality.Essential Responsibilities: Inspect products to verify compliance with order specifications, company quality systems, and applicable legal requirements Approve or reject products and document inspection results Measure and evaluate Dimensions and tolerances Angles, radii, contours, clearances Thread lead and surface finish Perform hardness testing on parts Inspect and verify gauges and measuring instruments for accuracy and conformance Prepare inspection reports, labor cards, job tickets, and required documentation Maintain established productivity and quality standards Communicate effectively with production, management, and other departments Maintain a clean, neat, and organized work area Follow all Good Manufacturing Practices (GMP) and safety procedures Ensure machine guards and safety equipment are in place and functioning properly Monitor and ensure required Personal Protective Equipment (PPE) is used at all times Perform additional duties as assigned QualificationsHigh School Diploma or GED required1-3 years of related quality inspection or manufacturing experience preferred Experience & KnowledgeAbility to perform a variety of inspection tasks Ability to read and interpret technical drawings, specifications, procedures, and regulations Ability to effectively communicate with managers, customers, and team members Working knowledge of word processing, manufacturing, database, and order processing systems Skills & CompetenciesStrong attention to detail and documentation accuracy Excellent organizational, time-management, and communication skills Solid math skills using whole numbers, fractions, and decimals Safety-focused and quality-driven mindset Ability to prioritize tasks in a fast-paced environment Physical RequirementsAbility to stand or sit for up to 8 hours Frequent hand and finger dexterity and fine motor coordination Occasional walking, climbing, balancing, and stooping Ability to lift up to 5 lbs frequently and up to 20 lbs occasionally Vision requirements include close vision, depth perception, color vision, and focus adjustment

Ameritex Machine and Fabrication is a high mix low volume sheet metal and structural fabrication facility that uses a variety of equipment such as CNC Fiber Lasers, CNC punch presses, CNC press brakes, and tube lasers to support over 19 production and assembly lines. The company serves customers in energy, oil and gas, automotive, electric vehicle, and aerospace. We operate out of a state of the art 100,000 sqft facility in Conroe, Texas. Job Responsibilities \tAddresses daily quality concerns and questions \tTroubleshoots manufacturing problems and quality issues \tWork closely with operation teams to ensure process controls are in place and adequate to meet standard requirements \tEnsure any non-conforming product is properly identified, quarantined and communicated \tExamines material or product for surface defects such as crack, pits, and incomplete welds \tVerifies specified dimensions of product or material \tConduct incoming material inspection, in-process inspection, and final inspection to procedures, specifications, drawings, samples, or illustrations. \tMust be able to follow instructions and work independently \tCleaning, organizing, and setting up workstations \tKitting or grouping required parts per job requirements \tMust be able to easily multitask around the shop. Qualifications \tExperience in manufacturing quality environment \tTooling experience needed \tComputer capable \tAble to stand, walk, squat, move for 8+ each day At least 2 years of college education Work Schedule Though this professional needs to complete his/her work during the standard routine hours, he/she might need to be flexible at times and extend beyond the normal hours to do the work which needs to be completed on a priority basis. $18.00 - $28.00 Hourly

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

The Quality Control Inspector is responsible for providing specialized technical expertise in support of the Quality program, including specialized inspection, testing techniques, quality training, statistical methods, audits, and quality tools for problem-solving and assessment. This position supports the Operations team and works with other team members, senior management, and personnel from all departments. Responsibilities 1. Complete inspection reports stating the conditions of a work area to ensure requirements are met. 2. Make recommendations for corrective action. 3. Apply knowledge of quality systems and tools to validate. 4. Verify customer specifications are met in project execution. 5. Implement principles of performance evaluation; prediction methods are used to improve product systems safety, reliability, and maintainability. 6. Complete documentation necessary to attest to satisfactory completion of inspection or test activities. 7. Under strict supervision, develop skills and knowledge to determine degree of conformance of products to specifications. 8. Perform other duties as required and/or assigned. Qualifications 1. A High School Diploma, or equivalent. 2. 5 years of related experience. (This exceeds minimums for Quality Control Manager) 3. Advanced Microsoft Excel skills. 4. Excellent written and verbal communication skills. 5. Strong interpersonal skills for interacting with team members and upper management. 6. Ability to think creatively, highly-driven and self-motivated. 7. Strong attention to detail, with a track record for leading the team around them to higher levels of operational excellence. 8. Ability to accurately keep records while managing multiple projects at one time. 9. Ability to work in a fast paced, high volume work environment. 10. Ability to read and understand maps, drawings, and diagrams for project build process. 11. Ability to communicate clearly and maintain a calm and effective demeanor in all circumstances. 12. Problem solving aptitude. 13. Ability to work independently with minimal supervision. 14. Ability to work weekends, holidays, and on-call, as needed. 1. A High School Diploma, or equivalent. 2. 5 years of related experience. (This exceeds minimums for Quality Control Manager) 3. Advanced Microsoft Excel skills. 4. Excellent written and verbal communication skills. 5. Strong interpersonal skills for interacting with team members and upper management. 6. Ability to think creatively, highly-driven and self-motivated. 7. Strong attention to detail, with a track record for leading the team around them to higher levels of operational excellence. 8. Ability to accurately keep records while managing multiple projects at one time. 9. Ability to work in a fast paced, high volume work environment. 10. Ability to read and understand maps, drawings, and diagrams for project build process. 11. Ability to communicate clearly and maintain a calm and effective demeanor in all circumstances. 12. Problem solving aptitude. 13. Ability to work independently with minimal supervision. 14. Ability to work weekends, holidays, and on-call, as needed. 1. Complete inspection reports stating the conditions of a work area to ensure requirements are met. 2. Make recommendations for corrective action. 3. Apply knowledge of quality systems and tools to validate. 4. Verify customer specifications are met in project execution. 5. Implement principles of performance evaluation; prediction methods are used to improve product systems safety, reliability, and maintainability. 6. Complete documentation necessary to attest to satisfactory completion of inspection or test activities. 7. Under strict supervision, develop skills and knowledge to determine degree of conformance of products to specifications. 8. Perform other duties as required and/or assigned.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Job Description Job Title: Quality Control Inspector Employment Type: Full-Time Shift: 1st Shift: 7:00 AM - 3:30 PM; requires some flexibility and the ability to work weekends. Company Overview At Ultra Corpotech Inc., we are shaping the future of manufacturing through precision, performance, and people. As a global company with a new U.S.-based operation, we are committed to delivering world-class products while upholding the highest quality standards. We foster a dynamic work environment built on continuous improvement, collaboration, and innovation. Join us as we continue to grow and raise the bar in manufacturing excellence. Position Overview The Quality Control Inspector is responsible for conducting visual, dimensional, and mechanical inspections of raw materials, in-process components, and finished goods to ensure compliance with engineering specifications, industry standards, and customer requirements. This role also supports document control, warehouse operations, and continuous quality improvement initiatives. This is a dynamic, hands-on position ideal for a candidate with a manufacturing background who is adaptable, detail-oriented, and eager to learn new skills across multiple functions. Key Responsibilities Perform inspections on incoming materials, in-process parts, and finished goods using appropriate measurement tools. Use calipers, micrometers, height gauges, go/no-go gauges, thread gauges, and tape measures. Inspect components based on technical drawings, blueprints, work instructions, and customer specifications. Identify and document non-conformances (NCRs) and collaborate with production and quality teams for resolution. Maintain accurate inspection records, test results, and quality data logs. Conduct first article inspections (FAIs), final inspections, and spot checks. Assist with root cause analysis and corrective actions for internal and customer-related quality issues. Support ISO 9001 compliance and participate in quality audits and documentation processes. Help calibrate and verify measuring instruments; report any out-of-tolerance or damaged tools. Assist in document creation and control to ensure internal compliance with quality procedures. Collect data from the shop floor and participate in continuous improvement initiatives. Required Qualifications High school diploma or GED required; technical certifications preferred. Minimum 5 years of quality inspection experience in a manufacturing or fabrication setting. Proficiency in interpreting blueprints, technical drawings, and material specifications. Working knowledge of ISO 9001 standards and quality systems. Experience documenting non-conformances, conducting inspections, and completing reports. Familiarity with warehouse operations such as receiving, inventory, packaging, and basic maintenance. Experience using Microsoft Office (Excel, Word) and/or quality databases. Forklift operation experience required. Preferred Qualifications Experience in metal fabrication, machining, or sheet metal inspection. Familiarity with CMM (Coordinate Measuring Machine) operation is a strong plus. Bilingual in English and Spanish highly preferred. Experience working with ERP or QMS systems. Knowledge of packaging methods and warehouse data systems. Skills Strong attention to detail with a commitment to accuracy. Quick learner with the ability to adapt in a fast-paced, cross-functional environment. Excellent verbal and written communication skills. Ability to interact effectively with individuals at all skill levels. Team player with a proactive attitude and a focus on continuous improvement. Physical Requirements Must be able to stand, walk, bend, and lift up to 50 lbs. Ability to work in a manufacturing environment with exposure to noise, dust, and moving machinery. Use of hands and arms to operate tools, lift materials, and conduct inspections. Benefits Competitive hourly compensation with growth opportunities Health, dental, and vision insurance Paid time off and holidays Ongoing training and development Opportunity to be part of a rapidly growing company committed to excellence Ultra Corpotech Inc. is an equal opportunity employer and encourages applications from all qualified individuals. We thank all applicants for their interest; however, only those selected for an interview will be contacted. Please note that all offers of employment are contingent upon successful completion of a background check and drug screening. Ultra Corpotech Inc. is committed to maintaining a safe and productive work environment and conducts pre-employment screenings to ensure our standards are met.

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you'll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: * Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required. * Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements * Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations. * Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database * Assist in training the production team on quality control measures to improve product excellence * Proposing improvements to the production process * Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements * Updating job knowledge by engaging in educational opportunities and regular training * Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs * Reading and interpreting engineering drawings and electrical schematics. * Comprehension and operation of basic electrical measuring equipment. * Collecting and compiling statistical quality data * Assisting in the development of test methods and inspection plans * Determining the causes of product defects and reworks * Verifying all equipment is calibrated correctly * Inspection of welded components * Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels. * Coordination and Support of customers during the FAT process. * Associates degree required * One year of experience with electrical inspection and testing required * One year of experience with fabrication and welding inspection required * Good written and verbal communication skills required * Excellent problem-solving and analytical skills required * Keen attention to detail required * Basic computer and math skills to calibrate and measure specifications required * Ability to use measuring devices such as gauges, meters, calipers, and computers required * In-depth understanding of company standards required * Up-to-date knowledge of federal and industry standards, UL codes, and best practices required * Understanding of target market and consumer needs required * Blueprint and electrical schematic reading capabilities required * Documentation and reporting skills required * Teamwork and collaboration required * Growth mindset with the ability to accept challenges required * Ability to pass physical, drug, driving, and background check required * Ability to physically push, pull, and lift 50lbs or more required * Ability to sit, stand, and walk for four-plus hours at a time required * Alignment with company core values required * Medical, dental, vision, HSA, term life, AD&D, STD, LTD * 100% medical premium paid for by Panelmatic for the employee-only level medical coverage * 80% paid by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family) * 401K and bonus * Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided * PTO and paid holidays provided * Career advancement opportunities * Competitive wages * Family-friendly environment with average employee tenure above five years

: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity before and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Shift Schedule: 12-hour shifts (4 days on / 4 days off) Rotational