Quality control inspector jobs in Kendall, FL

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Job Description The Cleaning Authority of Fort Lauderdale is looking for experienced professional cleaners who are ready to take the next step in their career - becoming trainers for our growing team! We're a trusted and well-established company, and with demand increasing, we need leaders who can coach, motivate, and guide new hires to deliver the high-quality cleanings our customers expect. What You'll Do Train new employees in the field (on-site and hands-on) Demonstrate and enforce our Detail-Clean Rotation System Ride along with new hires during their first 3 days Provide ongoing coaching and performance feedback Support office management in maintaining team standards Who We're Looking For Minimum 1 year of residential cleaning experience Strong communication and leadership skills Reliable transportation & valid driver's license Positive, team-first attitude Bilingual (English and Spanish) Pay & Benefits $17-$19/hr based on experience Paid travel time & mileage Weekly pay via direct deposit No nights or weekends Paid holidays & vacation time Career advancement opportunities (Team Leader & Supervisor roles) Why Work With Us? We value our employees and believe great training starts with great people. You'll be respected, rewarded, and a key part of our leadership team as we continue growing in Fort Lauderdale. Ready to lead and grow with us? Apply now and let's build a team that shines! Job Type: Full-time Pay: $18.00 - $20.00 per hour Expected hours: 38 - 40 per week Benefits: Fuel reimbursement Mileage reimbursement On-the-job training Paid time off Paid training Schedule: Monday to Friday Supplemental Pay: Performance bonus Tips Language: English (Preferred) Spanish (Preferred) License/Certification: Driver's License and reliable car (Required) Ability to Commute: Fort Lauderdale, FL 33312 (Required) Work Location: In person

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2nd Shift: 2:00pm-10:30pm

Mittera is looking for a Quality Inspector to join our growing team! The Quality Inspector will be responsible for developing, implementing, and maintaining comprehensive quality management systems that ensure our products consistently meet and exceed the highest industry standards. This role is critical in maintaining our reputation for excellence in our printing and collectible card production. Key Responsibilities * Perform inspections (in process, incoming and final) per procedures. * Release all acceptable finished goods, quarantine problematic finished goods for QA analysis. * Collect, review, and distribute Customer Samples based on Customer requirements * Collect, review, and file Retains. * Conducts WIP quality checks in each production department * Quarantine tag production that is outside of normal Mittera quality standards. * Sorts nonconforming product when required. * Notify Management immediately when any quality issue jeopardizes the completion of the order specified quantity. * Ensures tests and procedures are properly followed during production * Provides other assistance to the Quality Assurance Manager as requested * Works proactively to promote teamwork at all levels of the company * Conforms with and abides by all regulations, policies, work procedures, safety rules, security procedures and instructions * Performs all duties according to established safety policy, including wearing any required PPEs to perform duties as applicable * Willing to work flexible hours as needed * Ensure security of confidential Customer records and data * Special projects as assigned, working independently and/or within a team * And other job duties as assigned. Requirements Required Skills & Qualifications * Ability to understand, speak, read and write English * Self-starter and/or team player with strong verbal, written, and communication skills. * Courteous professional manner when interacting with all employees. * Solid technology skills with ability to utilize and learn various types of technology. * Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy * Efficient and high standards of accuracy and organization in performing tasks * Strong decision making skills and ability to prioritize work; effective time management skills * Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency * Proficient in Microsoft Office, including Word, Excel, internet and email * Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information * Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. * Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. * High School Diploma or equivalent * 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: * Medical * Dental * Vision * Life and AD&D Policies * Short and Long-Term Disability * 401K with Company Match * Paid Time Off * Paid Volunteer Time Off * Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

TITLE: QC Inspector - HRL REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This position is based in Harlingen, TX. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

Quality Control Inspector Miami International Airport Quality Control Inspectors report to the Quality Manager. This position requires certification under FAR Part 65, subparts D, E and acceptable training and experience. A minimum of three years documented verifiable experience or acceptable training on Transport Category Aircraft (including military types) is preferred. [FAR: 65. Subpt-D, 65. Subpt-E]. Duties and responsibilities include: Ensuring that aircraft maintenance work, materials and practices conform to the regulations and company policies and procedures. Reviewing paperwork, including maintenance forms, parts tags, work cards, maintenance orders and log sheets, etc. for proper completion per company requirements. Perform facility audits, work in progress audits and ramp and stockroom checks for cleanliness and organization. Coordinating RII inspection requirements for scheduled work. Accomplishing RIIs in accordance with the company procedures. Performing receiving inspection of parts, materials and components to ensure conformity with company requirements. Perform routine inspections of company tooling for condition, security and calibration. Making recommendations to overcome deficiencies in procedures, manuals or with aircraft or equipment. Performs additional duties and responsibilities as directed in other company manuals such as the Fueling and CASS Manuals. Perform any additional duties and responsibilities as directed by the Quality Manager or Director of Quality. Requirements Qualifications and Requirements Must hold a current Airframe & Powerplant license. Must be flexible to work any shift as necessary including weekends and holidays. Must be legally authorized to work in the United State and able to acquire airport security clearance. Must be fluent in the English language (written and spoken). Must be willing to travel on short notice. Have Boeing 767 aircraft maintenance experience, or equivalent experience working on wide body aircraft. Have at least two years of Quality control experience (preferred). Have strong analytical skills. Able to read and understand technical documents (AMM, IPC's SRM's, EO's, AD's, etc.) Able to identify problems, collect data, and develop corrective actions. Able to interact with Federal Aviation representatives. Physical Requirements. Must be able to lift 25 pounds.

Job Details Corporate Headquarters Miami - Doral, FLDescription For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the role of the QC Inspector is to ensure that all incoming and outgoing material is being checked for compliance to customer and/or DASI standards. Key accountabilities: Investigate NCM (Nonconforming Material). Control the segregation and proper disposition of material designated by the Material Review Board. Collect data for QA to use in training and performance evaluation of inspection staff. Coach Inbound and/or Outbound inspection teams to recognize errors and areas for improvement. Scrap process as required. Participate in Continuous Improvement Projects (CPAR's). Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. A pro-active team worker with warehouse experience ideally in an aerospace related business Ability to be flexible, responsive and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Looking for a challenging role in which they can develop personally and professionally. Results driven, taking pride in achieving objectives. Ability to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Experience and qualifications: High school diploma or equivalent required. Minimum 2 years of processing aviation surplus parts is required. ISO and/or AS Quality Standard knowledge, a plus. DASI, LLC. and group companies are an Equal Opportunities Employer

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and maintenance. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has close to 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries and Log Book Entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to them by the receiving inspector. Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as directed. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Direct Reports: This role has no direct reports. Work Authorization: Must be authorized to work in the United States of America. Requirements Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of five years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check.

SEGULA TECHNOLOGIES is hiring a Quality Inspector to join our client´s growing team in: Miami, Florida We offer a competitive salary and benefits plan, and great opportunities for career growth! Vacation days Flexible Spending Acounts Domestic Partner Coverage Health Savings Accounts Life and Disability Plan options Vision, Dental and Medical options 401K 2% Match With a global presence in 28 countries with 140 offices worldwide, SEGULA GROUP fosters a close relationship with its customers thanks to the expertise of its 11,000 employees. SEGULA TECHNOLOGIES is an Engineering and Design Services company with a proven ability to boost innovation and competitiveness within the major industrial sectors, including Automotive, Aerospace & Defense, Energy, Rail, Naval, Pharmaceutical, and Oil and Gas Job Description Responsible to ensure all airworthiness quality requirements are performed and documented in accordance with all applicable regulations in regards to maintenance, preventative maintenance, repair and alteration of aircraft, engine and aircraft components/parts for which the Repair Station is rated. • Adhere to General Work Requirements as required in coordination with Quality leadership • Conduct weighing procedure in accordance with manufacturers recommended practices and procedures • Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt • Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) • Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements • Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity • Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained • Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) • Perform walk around inspection of aircraft for release from maintenance • Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service • Provide data to customers as requested Qualifications • You have a minimum 3 years aircraft maintenance experience or substantiated equivalent experience • You have a minimum of 2 years of corporate / commercial jet experience • You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools • You have A&P Certification • You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment • You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements • You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc) • You have working knowledge of return-to-service procedures • You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification Additional Information All your information will be kept confidential according to EEO guidelines.

Job Requirements: include the following essential duties and responsibilities: Develop a thorough knowledge of CHAUVET DJ Product range and a working knowledge of Pro Product including both operation and multiple unit connectivity. Visually and physically inspect all products to determine they meet specification in regard to Packaging and Presentation, Physical Appearance, Performance and Functionality, using a range of necessary tools for testing. Safely and responsibly handle / operate hand tool such as calipers, power drills, screw drivers, laser testers, light meters, heat guns, box cutters and others as may be required. Document and report all issues to QC Supervisor that could lead to customer dissatisfaction, contribute to recurring defects and potential loss of sales. Provide timely feedback to Supervisor regarding product failures or performance concerns. Make sure Labeling, Barcoding and Silk Screening are accurate and correctly placed. Participate in department wide training, cross training and mentoring programs for new and existing team members with a view to increasing personal knowledge of Chauvet Products and Control systems specifically DMX protocol and ShowXpress. Develop skills that aid is successful diagnosis of errors related to product operation or functions. Partner with Customer Service. Repair Technicians, Sales and Shipping personnel to meet and exceed Chauvet Customer experience. Other duties as assigned. Education and/or Experience: High school diploma or general education degree (GED); 2-4 years or more experience in repair/service of lighting, small electronics or technical products. Ability to interpret technical instructions, follows established procedures, and keeps accurate records. Good observation and analytical skills. Attention to detail. Excellent communication and time-management skills with the ability to work independently with little supervision in a fast- paced environment. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand; walk; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and/or move up to ten pounds, frequently lift and/or move up to fifty pounds, and occasionally lift and/or move more than one hundred pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Ability to perform physical work and wear the proper safety equipment at the same time. Working Conditions: Work may be performed outside of a climate controlled environment.

Job DescriptionDescription: Verifies the correct assembly at the in-process assembly stages as described in the applicable inspection plan. Performs physical inspection of the assembled product prior to the performance of any functional tests performed to verify safe completion of the product. Uses production control systems and generates reports for product documentation files. Performs the final inspection of the completed product, includes both a physical and documentation review. Confirms the modification status, ensuring compliance to the current requirements. Verifies the correct configuration and identification of the end product. Prepares and completes all applicable release documentation. Ensures compliance to the quality procedures affecting the production process. Assists in troubleshooting technical problems of work in progress. Participates in continuous improvement efforts Maintains tool calibration log and schedules Performs other functions as assigned that do not conflict with the final inspection function. Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements. Moves between production assignments that utilize multiple skills as needed to support production requirements. Participates in the cross training of other technicians as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. Carries out other duties as assigned. Requirements: Has knowledge and experience using calipers, micrometers, CMM's, thread gages, etc Excellent Communication skills both verbal and written Cross functional collaboration necessary US Citizenship or Permanent Resident required for US Department of Defense work Familiarity with the defense/aerospace industry Prior quality experience required PM19 TopFlite, a division of kSARIA Corporation is an Equal Opportunity Employer/Disabilities/Veterans

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description QUALITY INSPECTOR Role Summary/Purpose: Ensure the parts and components of aircraft equipment conform to design specifications and meet industry standards. Interact directly with Aircraft Parts Technicians, customer engine sites, airline customers, engineering, and quality regarding technical issues. Essential Responsibilities: Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspects in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to customers, engineering, production, and quality. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Documents inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Qualifications / Skills: High school diploma / GED One to two years related experience or training Must be authorized to work in the United States Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments Requires the ability to read, write, and speak the English language: interpret and follow written procedures, etc., complete documentation, i.e. routers, etc., and follow verbal instructions Basic math, computer skills, attention to detail; Hand/eye coordination and analytic skills Documentation and Reporting skills Near Vision: 20/25 (Snellen) at 16” (42 cm) ± 1” (2.54 cm) or equivalent in at least one eye, natural or corrected is required. Physical Demands / Work Environment The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently required to sit, stand, regularly use full range of motion of upper and lower extremities, regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Exposure to chemicals, noise, varying temperatures, and other workplace hazards however, PTI has established process, procedures, and protective equipment to reduce or eliminate exposures to these hazards and full compliance is a requirement of the job. About Us Propulsion Technologies International, LLC (PTI), a joint venture between GE Aviation & Safran Aircraft Engines, offers a great work environment with fast-paced, challenging and rewarding careers. Both GE & Safran are world leaders in the design and manufacture of aircraft engines, propulsion systems, & aircraft equipment. This could be your opportunity to join the exciting aviation industry! We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. PTI will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen. 2nd Shift - M-F 2:30pm-11:00pm

Full-time Description General MRO Aerospace (GMA) is a globally recognized FAA 145 Repair Station that specializes in maintenance and repairs of hydraulic, pneumatic, electrical, fuel and electromechanical aircraft components. Since 2006, we have consistently set new industry standards in all aspects of our business by providing unmatched flexibility, tailored services, and highly competitive turnaround times. We are looking for an experienced, hardworking and motivated individual to join our Quality team. If you have what it takes to perform this job, then we want you in our team! Essential Duties: Develops methods and write detailed instructions for inspection processes. Direct involvement with maintaining FAA and AS9100 standards and other quality accreditations. Use standard electrical and mechanical measurement devices. Document inspections. Use MS Office products to update test and inspection documents, reports, charts, checklists and databases. Maintain and inspect repair station to FAA regulatory guidelines. Align process documentation with process capabilities. Analyze and implement customer requirements into existing systems and processes. Coordinates the calibration of equipment and the ordering of testers, gauges, and equipment to support product acceptance. Maintain our technical library, ensuring all component maintenance manuals are within revision along with all Air worthy directives, service bulletins, etc. Will be assisting with creating and implementation of corrective action reports, addendums to manuals, trainings through the facility. Other duties as assigned. Requirements Experience, Skills and Qualification: Experience: The review of all traceable parts to sources 121, 129, 145, 135, and OEM's. Knowledge and understanding of FAR (Federal Aviation Regulations) Experience is acceptable but not a requirement as the company is willing to provide OJT. Skills: Excellent organizational skills. Must be able to convey accurate notes and messages. Proficient with Microsoft office, word and Excel. Ability to work in a fast-paced environment and meet deadlines. Strong interpersonal and problem-solving abilities. Ability to manage complex projects and multi-task. Highly responsible and reliable. Qualification: **Minimum of 2-years in quality assurance, aerospace quality control inspection. High school diploma or equivalency certificate. Advanced knowledge of inspection techniques and instruments. Read, interpret and support development of engineering drawings. Requires training in inspection techniques and principles. Benefits Offered: 50% employer-paid medical for individual coverage Medical, vision, dental, and gap coverage Life, critical illness, short-term disability and accident coverage 401(k) with employer match Paid Time Off (PTO) and Vacation 7 Paid major holidays Employee Referral Program Positive team-focused work environment Opportunity for internal growth and advancement

Job DescriptionDescription:Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements:What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs.

Job Summary of the R&O Quality Inspector The R&O Quality Inspector is responsible for the Quality Control of the repairs within the 145-repair station. Must adhere to the Repair Station Quality Control Manual (RSQCM), Component Maintenance Manuals (CMM), and all 14 CFR Aviation Regulations. Duties/Responsibilities of the R&O Quality Inspector Train, direct, and assist all inspection personnel performing work under the repair station certificate as directed by the Accountable Manager. Ensure the proficiency of every inspector by completing the Inspector Proficiency Checklist Form RSF-211-01. Ensure all incoming, hidden damage, preliminary, in-process, and final inspections are performed following the procedures outlined in the manual. Respond to any request for inspection of this repair station certificate. Determine the final disposition of articles failing to meet the incoming inspection review as directed by the Accountable Manager. Ensure appropriate calibrations and checks are made on the tools and equipment used by the repair station as described in the manual. Red-tag or placard any malfunctioning or non-functioning equipment. Assist Field & Tech Services with aviation technical questions. Additional duties as assigned Note: This description is an outline of the major recurring responsibilities of the job. It is not intended to be all-inclusive of the work to be performed. Other related job objectives, special assignments, and less significant responsibilities typically performed by the incumbent are not included. Required skills/abilities of the R&O Quality Inspector Read and understand drawings, manuals (CMMs), work instructions, and schematics. Use industry-standard electronics bench test equipment, i.e., Spectrum Analyzer, O-scope, multi-meter, and power supplies. Ability to read, write, and speak English. Proficient with a PC and Microsoft Office products (Excel, Word, Outlook) Computer and website navigation skills are required. Strong Customer service and communication skills Phone skills are required, as well as organizational skills Knowledge, Education, and Experience of the R&O Quality Inspector Airframe or Repairman Certification, or the ability to obtain within a six-to-twelve-month timeframe 3+ years of experience working with an AS9100 QMS 3+ years of experience in electronics or avionics installation and repair Experience dealing with Aviation OEMs is a plus General knowledge of the FAA requirements for a FAR 145 repair station is required

When applicable, Bombardier promotes flexible and hybrid work policies. **Why join us?** Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. **Bombardier's Benefits Program** With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: + Insurance plans + _Dental, medical, life insurance, disability, and more_ + Competitive base salary + Retirement savings plan + Employee Assistance Program **What are your contributions to the team?** + Adhere to General Work Requirements as required in coordination with Quality leadership + Conduct weighing procedure in accordance with manufacturers recommended practices and procedures + Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt + Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) + Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements + Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity + Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained + Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) + Perform walk around inspection of aircraft for release from maintenance + Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service + Provide data to customers as requested **How to thrive in this role?** + You have an Airframe & Powerplant (A&P) Certification + You have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience + You have a minimum of 2 years' of corporate / commercial jet experience + You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools + You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment + You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements + You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc.) + You have working knowledge of return-to-service procedures + You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification **_This position may be eligible for up to a 5K sign-on bonus!_** _(Terms & Conditions apply)_ **Now that you can see yourself in this role, apply and join the Bombardier family!** Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. **Job** Quality Inspector **Primary Location** Opa Locka Service Center **Organization** Learjet Inc **Shift** **Employee Status** Regular **Referral Amount** $2,000.00 **Requisition** 2483 Quality Inspector

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.