Quality control inspector jobs in La Crosse, WI

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm. • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed. • Perform rotational capacity tests on bolts prior to use in shop. • Work with outside inspectors to resolve quality issues on the floor. • Monitor welder qualification tests. • Monitor and record welding parameters to insure compliance to approved WPS. • Be able to read and understand the Welding code and Specifications. • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Perform in a manner that will assure quality work flowing through the shop. • Work with welders and leadmen to maintain quality. • Be available, by use of a radio, etc. to perform needed checks. • Maintain a log of work done, and complete required reports. • Interpret the Specifications and applicable Codes. • Ability to be flexible to work either early or late within assigned shift as needed. • Coordinate inspection of QC hold points between production and DOT Inspectors. • Use and encourage safe working habits. Must have CWI Certification NACE or BCI Certification is desired Ability to be conscious of Specifications and Company standards Ability to be organized and precise in maintaining a diary and reports Must have good people skills in dealing with difficult situations Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. • Coordinate your work with shipping department to assure loads have been inspected and ready to ship. • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time. • No accidents. A safe worker is an asset to both their fellow worker and the company. • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Friday - Sunday 5am - 5pm

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: * Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements * Review drawings, specifications, and quality plans * Document inspections, test results, and non-conformance reports (NCRs) * Support field teams with quality assurance processes * Ensure adherence to safety protocols including LOTO and arc flash * Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: * Bachelor's degree in a related field (or equivalent experience) * Minimum 3 years of construction or field-related experience * Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam * OSHA 30 preferred (or willingness to obtain) * Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: * Competitive Pay * Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings * Employer-Paid Short- and Long-Term Disability Programs * Employer-Paid Life Insurance * Generous Paid Time Off Provisions * 401K Retirement Savings Plan with Company Match * Tuition Reimbursement * Fully Paid Parental Leave * Voluntary Products Including: Critical Illness Insurance and Accident Insurance * Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

Quality Control Inspector - 1st Shift, 7am-3:30pmPay: $20-$24/hour (Based on Experience) At our client, they don't just build components-they ensure quality at every step. As a Quality Control Inspector, you'll play a critical role in maintaining the excellence our customers depend on. If you're detail-driven, reliable, and ready to grow within a fast-paced manufacturing environment, this is your opportunity to make an impact. We are seeking a meticulous and motivated Quality Control Inspector for our 1st shift team. You will be responsible for performing Incoming, In-Process, and Final Inspections, using traditional metrology tools to ensure components meet required specifications and quality standards. Essential Duties and Responsibilities: Inspect alignment and dimensions of parts using ID/OD micrometers, height stands, and calipers Perform manual drafting to document dimensional requirements Verify parts against product specifications, drawings, and part lists Visually examine parts and document production results Ensure all inspections and records comply with the Quality Management System and Customer Requirements Confirm assembly completeness and identify missing or incorrect hardware Participate in ongoing training and maintain equipment certifications Required Competencies & Skills: Proficient with manual inspection tools (Micrometers, Calipers, Height Stands) Ability to read and interpret manufacturing drawings and blueprints Strong verbal and written communication skills Solid mathematical knowledge including geometry, trigonometry, fractions, decimals, and layout functions Excellent critical thinking, problem-solving, and time management abilities Adaptable and able to work both independently and as part of a team Preferred Qualifications: Valid driver's license Prior experience in a manufacturing or quality control environment Exceptional attendance record (required) Completion of Overhead Crane and Forklift Training (training provided upon hire if needed) Physical Requirements: Frequent standing, walking, climbing, stooping, kneeling, bending, and lifting (up to 50 lbs) Frequent use of hands, tools, and inspection equipment Occasional talking or hearing in a production setting

PCB Manufacturing | QC Inspector Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Be able to complete AS 9102 Reports Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of Quality Control experience Knowledge of AS 9100 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC).Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB, AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Visit us!********************* Salary Description $20-$25.00/hour

Anteris is a science-driven structural heart company that is redefining expectations and advancing the field through cutting-edge solutions focused on restoring native-like physiology versus treating symptoms of structural heart disease. We are currently developing a new class of TAVR designed to mimic the performance of a healthy aortic valve. With offices in Minneapolis, MN, US; Geneva, Switzerland; and Brisbane and Perth, Australia, we have a growing and inclusive team. The Quality Control Inspection team plays a key role supporting our manufacturing operations at the Maple Grove site. This role is involved in a wide range of inspection tasks, where the primary goal is to assure that the products we produce are conforming to specifications and properly evaluated for compliance to visual, dimensional, functional, and various other specified requirements. The QC Inspector will be responsible for performing inspections in a highly regulated medical device development and manufacturing environment across all areas of standard work for the team (receiving inspection, first article inspections, label verifications, valve inspections, tissue inspections, pre-sterile product inspections, and sterile product inspections). This is a high visibility role with daily interactions across a wide range of peer groups in the Maple Grove site. Shift: Day Shift, Monday through Friday, 6:00 a.m. - 2:00 p.m. At Anteris Technologies, you'll be part of a team dedicated to enhancing the quality of life for patients with aortic stenosis through groundbreaking medical devices. Join us in our mission to revolutionize structural heart solutions. Primary Duties and Responsibilities Perform all duties listed below in strict compliance with the Anteris Quality Management System including Good Documentation Practices. * Responsible for performing receiving inspection on material / products supplied to Anteris to ensure conformance to requirements and specifications. * Perform microscope and other aided visual inspections on biological tissue based medical device products to ensure conformance to processing requirements and specifications. * Perform machine / software-controlled inspections on products to ensure conformance to processing requirements and specifications. * Perform inspections, as required by procedure, in support of first article inspections and label verifications. * Perform physical and visual inspections on material, products, and/or packaging being processed for sterilization. * Make an informed decision, based on training to tasks assigned, on the acceptance of materials, products, and inspected features, requirements, and specifications in all standard work tasks. * Complete and maintain accurate records of inspection activities, including measurements, observations, results, conclusions, nonconformance issues, and full completion of quality record fields in support of standard work tasks. * Collaborate with peers in Operations to effectively stay on plan, be mutually organized to goals, and communicate effectively through escalation channels as required. * Other tasks assigned by group lead or designee. Skills, Knowledge, Experience & Qualifications Required Skills and Knowledge: * High School diploma or equivalent. * 5+ years' overall experience in Medical Device (ISO 13485, FDA QSR) manufacturing environment. * 5+ years' equivalent work experience directly applicable to Primary Duties and Responsibilities listed above. * Strong attention to detail and experience in reading, interpreting, and comprehending product requirement documents and specifications. * Experience in learning and cross-training on widening set of responsibilities in a team-based environment. * Experience working directly with computers to input data, perform electronic based work tasks, complete training, and manage email communications. * Effective verbal and written communication * Ability to work in a fast-paced environment. * Effective problem-solving and troubleshooting skills. Preferred Skills and Knowledge: * Vocational or technical training in assembly, sewing, or inspection of biological tissue based medical devices. * Vocational or technical training in the use of microscopes, including the use of specialized reticles and/or tappi charts. * Vocational or technical training in the use of MicroVu optical inspection systems. * Vocational or technical training in Lean or 5S principles. * Vocational or technical training in GD&T principles and specification designs. What We Offer: * Opportunity to make a significant impact on the healthcare industry by advancing groundbreaking therapies. * Collaborative and dynamic work environment with a culture of innovation and excellence. * Competitive compensation package, including salary, performance-based bonuses, and stock options. * Career development opportunities and a chance to be part of a growing company that values its employees. Health and Wellness Offerings: * Medical, Dental, and Vision Plans * Flexible Spending Account (FSA) * 401k + Company Match * Life, AD&D, Short Term and Long-Term Disability Insurance * Bonus Plan Eligibility * Employee Equity Program * Paid Holidays & PTO * Employee Assistance Program * Inclusive Team Environment Note: We may require proof of COVID-19 vaccination to comply with the state, local municipality, and/or travel regulations. Anteris Technologies recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. We have a clear vision: to be a place of belonging for all humans by promoting diversity, multiculturism and inclusion, as a goal and reflection across the organization. Diversity is more than a commitment - it is part of our mission to deliver the best structural heart products on a global scale. By applying to this position, you consent to receive text messages from the Anteris Talent Acquisition team regarding your application. Message and data rates may apply. You may opt out at any time by replying STOP.

Anteris is a science-driven structural heart company that is redefining expectations and advancing the field through cutting-edge solutions focused on restoring native-like physiology versus treating symptoms of structural heart disease. We are currently developing a new class of TAVR designed to mimic the performance of a healthy aortic valve. With offices in Minneapolis, MN, US; Geneva, Switzerland; and Brisbane and Perth, Australia, we have a growing and inclusive team. The Quality Control Inspection team plays a key role supporting our manufacturing operations at the Maple Grove site. This role is involved in a wide range of inspection tasks, where the primary goal is to assure that the products we produce are conforming to specifications and properly evaluated for compliance to visual, dimensional, functional, and various other specified requirements. The QC Inspector will be responsible for performing inspections in a highly regulated medical device development and manufacturing environment across all areas of standard work for the team (receiving inspection, first article inspections, label verifications, valve inspections, tissue inspections, pre-sterile product inspections, and sterile product inspections). This is a high visibility role with daily interactions across a wide range of peer groups in the Maple Grove site. Shift: Day Shift, Monday through Friday, 6:00 a.m. - 2:00 p.m. At Anteris Technologies, you'll be part of a team dedicated to enhancing the quality of life for patients with aortic stenosis through groundbreaking medical devices. Join us in our mission to revolutionize structural heart solutions. Primary Duties and Responsibilities Perform all duties listed below in strict compliance with the Anteris Quality Management System including Good Documentation Practices. Responsible for performing receiving inspection on material / products supplied to Anteris to ensure conformance to requirements and specifications. Perform microscope and other aided visual inspections on biological tissue based medical device products to ensure conformance to processing requirements and specifications. Perform machine / software-controlled inspections on products to ensure conformance to processing requirements and specifications. Perform inspections, as required by procedure, in support of first article inspections and label verifications. Perform physical and visual inspections on material, products, and/or packaging being processed for sterilization. Make an informed decision, based on training to tasks assigned, on the acceptance of materials, products, and inspected features, requirements, and specifications in all standard work tasks. Complete and maintain accurate records of inspection activities, including measurements, observations, results, conclusions, nonconformance issues, and full completion of quality record fields in support of standard work tasks. Collaborate with peers in Operations to effectively stay on plan, be mutually organized to goals, and communicate effectively through escalation channels as required. Other tasks assigned by group lead or designee. Skills, Knowledge, Experience & Qualifications Required Skills and Knowledge: High School diploma or equivalent. 5+ years' overall experience in Medical Device (ISO 13485, FDA QSR) manufacturing environment. 5+ years' equivalent work experience directly applicable to Primary Duties and Responsibilities listed above. Strong attention to detail and experience in reading, interpreting, and comprehending product requirement documents and specifications. Experience in learning and cross-training on widening set of responsibilities in a team-based environment. Experience working directly with computers to input data, perform electronic based work tasks, complete training, and manage email communications. Effective verbal and written communication Ability to work in a fast-paced environment. Effective problem-solving and troubleshooting skills. Preferred Skills and Knowledge: Vocational or technical training in assembly, sewing, or inspection of biological tissue based medical devices. Vocational or technical training in the use of microscopes, including the use of specialized reticles and/or tappi charts. Vocational or technical training in the use of MicroVu optical inspection systems. Vocational or technical training in Lean or 5S principles. Vocational or technical training in GD&T principles and specification designs. What We Offer: Opportunity to make a significant impact on the healthcare industry by advancing groundbreaking therapies. Collaborative and dynamic work environment with a culture of innovation and excellence. Competitive compensation package, including salary, performance-based bonuses, and stock options. Career development opportunities and a chance to be part of a growing company that values its employees. Health and Wellness Offerings: Medical, Dental, and Vision Plans Flexible Spending Account (FSA) 401k + Company Match Life, AD&D, Short Term and Long-Term Disability Insurance Bonus Plan Eligibility Employee Equity Program Paid Holidays & PTO Employee Assistance Program Inclusive Team Environment Note: We may require proof of COVID-19 vaccination to comply with the state, local municipality, and/or travel regulations. Anteris Technologies recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. We have a clear vision: to be a place of belonging for all humans by promoting diversity, multiculturism and inclusion, as a goal and reflection across the organization. Diversity is more than a commitment - it is part of our mission to deliver the best structural heart products on a global scale. By applying to this position, you consent to receive text messages from the Anteris Talent Acquisition team regarding your application. Message and data rates may apply. You may opt out at any time by replying STOP.

Job Description Why Kendall Howard? We're a growing IT manufacturer with a no-nonsense attitude: stay humble, work hard, and take on challenges head-first. Around here, you won't just “do your job” - you'll be part of a team that builds, solves, and delivers products we're proud to put our name on. The benefits and pay are solid, but the real perk is being part of something that matters alongside people who care just as much as you do. Our Benefits We know benefits matter, and we've got you covered. Full-time employees enjoy: Medical, Dental & Vision coverage Supplemental insurance options 401(k) with company match Paid Time Off (PTO) Paid holidays Job Summary: The Quality Control Inspector is accountable for the practical application of the internal Quality Control System. This position ensures that the quality standards as defined by the designers are being met on the shop floor as well as with materials and services supplied by outside vendors. Essential Functions: Perform in-process and final inspection activities to ensure all products are manufactured in compliance with work order, traveler, and blueprint specifications. Develop and maintain inspection reports and documentation. Measures all parts according to blueprint using Vernier caliper, micrometer, protractor, height gauge, hole and thread gauge, and other tools as needed. Aids in troubleshooting problems during inspection activities and recommends corrective actions to resolve issues. Follow up on all cases involving product issues and provide resolution recommendations to Quality Manager, Lean Coordinator, Plant Manager, or Engineering Manager Maintain periodic inspection schedules to ensure spot checking of production quality. Maintain 3rd party inspection process. Maintain the returns and reject re-distribution and scrap procedures. Minimum Qualifications 1-4 years of experience in the quality field Experience with blueprints and calibrating measurement tools is required. Good Oral and written communication skills. Understanding of the manufacturing process. The ability to work with minimal supervision. Strong time management skills. Monday-Friday

Transco As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Who We Are: Transco Railway Products, Inc. has been the leader in providing railcar maintenance and services to the railcar industry. We have earned the reputation for honesty, integrity, and superior quality which has allowed us to establish a committed customer base. Transco is part of Marmon - a strong, growing, global organization that consists of more than 100 autonomous manufacturing and service companies. Job Description: We are looking for a Quality Control Inspector to perform final inspections on railcars to ensure the required work is completed and in compliance with industry standards and customer requirements. The QC Inspector will also support the production team with other quality initiatives as needed. Job Requirements: * Perform inspections of the final product to assess the quality of work performed and compliance to company standards using checklists, reports, forms, procedures, hand tools, gauges, and test instruments. * Work with production to identify and plan for the day's shipments to ensure verifications and inspections are made in a timely manner. * Ability to use railroad gauges, testing techniques, and test equipment necessary for railcar inspections. * Report adverse and/or non-compliant items to the responsible supervisor and QA Manager and follows-up to confirm that remedies have been put in place on items before the car is released to subsequent processes/stages. * Communicate technical information verbally and in writing. * Ability to instruct employees on proper railcar maintenance activities using established procedures and training materials. * Able to perform tasks that require climbing and balancing on ladders and platforms. Verifies cars are properly secured and identified prior to being released. * Able to pass drug screen and physical. What We Offer: * Transco strives to be the Employer of Choice. Our generous benefits package includes: * Benefits on Day 1 * Medical/Dental/Vision with first in class vendors * Health Savings Account * Flexible Spending Account (Medical and Dependent Care) * Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance * Employee Assistance Program * 4 weeks of Paid Parental Leave * Vacation Benefits * 401k with generous company match and additional employer annual contribution Don't worry if you think that you do not meet all the qualifications. The tools, technology, and methodologies we use are constantly changing and we value talent and interest over specific experience. It is the policy of Transco to provide equal employment opportunities to all qualified persons, and to recruit, hire, train, promote, and compensate persons in all job without regard to race, color, religion, sex, national origin, disability, or sexual orientation, gender identify, protected veteran status or any other protected characteristic protected by the law. Pay Range: 54,000.00 - 66,000.00 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

As a Quality Control Inspector, you are an invaluable manufacturing team member, ensuring the highest production quality from in-process inspections to final inspections. Inspect products and materials visually and with measurement tools like torque wrenches, micrometers, or calipers. Your job is to ensure our products are consistently high quality and adhere to relevant specifications. Support operations and quality teams regarding the quality of the products and materials, process scrap, perform rework and efforts and help solve problems by providing rejection information for root cause analysis. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. * Perform quality inspections to ensure products and materials meet standards, print and/or specifications * Conduct quality in process and final inspections * Document issues noticed during testing, measurement or visual inspection * Removing products that don't meet production standards * Accepting or rejecting finished products and discussing inspection results with the production team and Quality Engineers * Serve as the primary quality resource to operations * Interface with quality and operation representatives concerning quality problems * Directly support the Quality Engineer to adequately control the quality hold area and the disposition of materials and products. * Directly support Quality Engineer to evaluate causes of scrap and work toward the elimination of such defects * Coordinate with Operations and direct associates on quality standards * Regular and reliable attendance at work * Participate in all TVS SCS quality and excellence initiatives. Competencies * Attention to detail * Be able to follow inspection sheets and work instructions * Knowledge of basic math and computer skills * Ability to influence others to follow work instructions, rules and regulations * Strong leadership skills and teamwork mentality * Verbal and written communication skills * Dexterity, physical strength, and physical stamina * Conscientious * Adaptable * Initiative Physical Demands The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The associate may occasionally be required to lift 51 pounds, anything greater than 51 pounds requires assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment This job is performed in a busy warehouse environment with high forklift traffic. Warehouses are subject to seasonal temperatures. Steel-toed shoes, safety glasses and vests are required personal protective equipment (PPE). It is estimated a 10% office environment and 90% warehouse environment. Position Type/Expected Hours of Work Full Time, Non-Exempt. Schedule flexibility for extended or unplanned work hours is required. Travel Travel is not expected for this position. Education and Experience * High school diploma or GED certificate * Ability to read work instructions/inspection sheets and use precise measurement tools, such as a torque wrench, micrometer, and caliper * Attention to detail * Ability to follow verbal and written instructions * Valid driver's license and reliable transportation * Proficiency with Microsoft Office Suite including Excel, Word, and PowerPoint Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. TVS SCS NA is committed to cultivating a diverse and inclusive culture as an EEO employer. The TVS SCS NA team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law within any employment practices. We are pleased to provide reasonable accommodations to applicants; please contact [Hope Molyneaux, *********************] to request a reasonable accommodation. The employee selected for this role must be able to perform the position's essential functions satisfactorily. If requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. TVS SCS NA complies with the CPRA: CALIFORNIA PRIVACY NOTICE **************************************************************************************************

Job DescriptionJoin our client's team in Kansas City! Are you passionate about ensuring airworthiness and safety in aircraft maintenance? Our client, a leading aircraft component service organization, is seeking a Quality Control Inspector with a keen eye for detail. If you thrive on precision and excellence, this role is perfect for you.Job Summary: As a Quality Control Inspector, you will play a crucial role in ensuring all maintenance work meets airworthiness standards and regulatory requirements. You will conduct various inspections on aircraft components to determine serviceability and airworthiness, ensuring compliance with technical data and documentation standards. Responsibilities: Perform preliminary, routine, and in-process inspections on aircraft and components. Document maintenance activities following relevant regulations and standards. Conduct final buy-back of maintenance and issue airworthiness releases. Monitor compliance with safety regulations and scrap bin policies. Provide oversight, guidance, and assistance on the floor. Conduct facility audits for regulatory compliance. Complete OJT documentation and maintain training records. Qualifications: Minimum three years of heavy aircraft maintenance or aircraft component maintenance experience. FAA Airframe and Powerplant (A&P) License required. Knowledge of technical and regulatory documentation interpretation. Strong communication skills and ability to work effectively in a team. Proficiency in MS Office and basic computer skills. Ability to work various shifts and schedules. Prior NDI and QC experience preferred. Benefits: We offer a competitive hourly rate, full benefits package, and a dynamic work environment that fosters growth and development. If you are ready to take the next step in your aviation career, apply now for the Quality Control Inspector position at Kansas City.

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

Benefits 401(k) with company matching• Health, dental, and vision insurance• Health savings account (HSA)• Paid time off• Employee assistance program (EAP)• Referral program 4 x 10 hour shifts Monday-Thursday Culture We foster a collaborative and positive work environment where clear and respectful communication is valued at every level. We actively embrace change by encouraging cross-functional improvements that enhance operational efficiency and product quality. Our team members are expected to listen thoughtfully to the ideas and concerns of others, respect confidentiality, and consistently embody our core values: Integrity, Trust, Creativity and Courage, Teamwork, and Excellence. Position Summary: We are seeking a meticulous and dependable Quality Control Inspector to join our team. The QCInspector will be responsible for conducting in-process and final inspections to ensure that parts,assemblies, and finished products meet internal quality standards and customer specifications. This role plays a key part in identifying non-conformities, maintaining documentation, and supportingcontinuous improvement within a fast-paced production environment Key Responsibilities In-Process Inspection• Perform inspections at various stages of manufacturing to verify dimensional accuracy,workmanship, and compliance with drawings and specifications.• Monitor and document production processes to ensure consistency and control.• Collaborate with machine operators and production personnel to identify and resolve qualityissues early in the process.• Record and communicate any discrepancies or deviations found during in-process checks.Final Inspection• Conduct final product inspections prior to shipment to verify compliance with all customer andinternal requirements.• Review travelers, inspection records, and customer documentation for job completionaccuracy.• Identify and document non-conforming materials, ensuring proper disposition per qualityprocedures.• Approve final product release and verify all required documentation is complete and accurate. Qualifications High school diploma or GED required; technical certification in Quality or Manufacturingpreferred.• 2+ years of quality inspection experience in a manufacturing environment (machining ormetalworking preferred).• Proficiency in interpreting mechanical drawings and GD&T.;• Skilled in the use of standard measuring and inspection equipment.• Strong documentation, analytical, and communication skills.• Detail-oriented, self-motivated, and capable of managing time effectively.• Working knowledge of quality management systems (e.g., ISO 9001) preferred.• Experience with ERP or quality software systems (e.g., NetSuite, IQMS, or similar) a plus.Culture• Foster a collaborative and positive work environment with clear and respectful communication.• Encourage and implement cross-functional improvements to enhance operational efficiencyand product quality.• Listen respectfully to feedback and ideas.• Maintain confidentiality and uphold company values: Integrity, Trust, Creativity and Courage,Teamwork, and Excellence. General Quality Control Duties Use precision inspection tools such as calipers, micrometers, height gauges, indicators, andoptical comparators.• Read and interpret blueprints, GD&T;, engineering drawings, and specifications.• Maintain accurate inspection records and detailed reports.• Collaborate with Quality Engineers and Supervisors on root cause analysis and correctiveactions.• Support internal audits and maintain compliance with ISO 9001 or other applicable quality systems. Working Conditions Fast-paced manufacturing environment.• Requires standing, walking, and lifting for extended periods.• May involve exposure to noise and varying temperatures.• Occasional lifting of up to 50 lbs.Attendance Requirements Regular and consistent attendance is mandatory. Accommodations Essential functions may include lifting, reaching, bending, stooping, twisting, kneeling, crouching,carrying objects, ascending/descending stairs, and commuting to the work location.Job TypeFull-time, In-Person (Osceola, WI) Shift AvailabilityDay Shift

Temp To Full-Time Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality, and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner.

SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS

The Quality Technician will support manufacturing operations utilizing Wabash Quality disciplines, processes, and tools with the objective of improving operating performance and ensuring our products meet the customer's needs and expectations. The Quality Technician will work with the Wabash Quality Philosophies in mind with a focus on risk mitigation, error proofing, and problem solving. Essential Duties and Responsibilities: B elow are examples of the type of duties you could be responsible for: Adheres to and promotes the safety objectives of the organization Provide leadership and training in supporting the Quality system To assist the manufacturing team in improving quality and mistake proofing processes Collect data, perform capability studies/reports, interpret charts and solve problems, grading, snow plowing, and other such tasks Support a variety of manufacturing operations using various quality tools and techniques such as inspecting, gathering data, containment, problem solving, help implement problem resolutions and follow up on actions. Must be willing to work flexible shifts/hours as required Data collection, and documentation support Process Audits Manage the measurement and test equipment, torque wrenches, dial calibers, weld gages in calibration database Conduct PPAP (Production Part Approval Process) functional and dimensional trials Processing nonconforming material and conducting receiving inspection Work with engineers, supervisors, and shop personnel to ensure work is done to specific procedures and customer specifications. Issue Inspection Forms and enforce in-process record keeping. As a standard practice for continual improvement of quality, question any condition that appears to be sub-standard even if not defined in inspection documents, Respond to shop requests for inspection assistance with a sense of urgency; routinely perform all inspections and documentation completely and in ethical manner Become familiar with the latest applicable mandatory ASME Code and National Board specifications. Become familiar with the applicable 3-A Sanitary Standards. May be required to train, lead, and/or direct the work of others. Follow up on identified nonconformities (Rework and Warranty) to ensure proper resolution and action taken to prevent in the future. Maintain up-to-date files of inspections records, test certifications, documents, reports, etc. Suggest improvements or alternative methods and materials to reduce cost and/or improve quality. Always follow established safety procedures and policies. Works closely with other members of business unit to meet the units' strategic objectives. Assist with coordinating and administering company policies and programs. Performs other duties as apparent or assigned. Performs and leads WMS Problem Solving and Audits. Approve or reject components and products at various stages of the production process from receiving through final test and shipment including communicating, documenting and disposition of nonconformities. Follow up on identified nonconformities in production to ensure their proper completion. Question any conditions that appear to be sub-standard, even if not defined in inspection documents, as a standard practice for continual improvement of quality. Interface with employees, customers, and vendors in an effective manner to ensure that quality requirements are properly conveyed and achieved. Assist other Quality members as required. May lead and direct the work of others. Keep Production Supervisor and Q.C. Manager/Supervisor advised of any quality problems, concerns, delays, etc. Advise Supervisor of any required maintenance work. Maintain an orderly and safe work environment. Suggest methods improvements or alternate methods and materials to reduce cost and/or improve quality Confirms and Completes Tanks for Final in SAP Tools & Equipment: Below is a list of examples of the potential tools and equipment you may find yourself working with depending upon your department and location. Wabash provides all the necessary training for you to feel comfortable and confident to excel at your new career with us. Computer iPad Flashlight Radio Tape Measure SAP software Email Other various test equipment Microsoft Office PMI Gun All Hydro equipment and gauges Alignment testing equipment Light and brake testing equipment Black Light for L.P.E 3 Testing Qualifications: 4 years' manufacturing experience Experience with Microsoft applications programs -- Excel, Word, Outlook, PowerPoint, SharePoint Competent in basic Mathematics and English High School degree or G.E.D equivalent. Problem Solving experience preferred (8D, 5 Why, etc.) Understand basics engineering concepts, fit, form, and function Must have both good written and verbal communication skills Must have analytical skills and be able to exercise independent judgment Ability to read and interpret technical data and engineering drawings is required Experience reading and using a variety of precision measuring instruments preferred Must be able to direct and influence the actions of others within areas of responsibility Ability to function under pressure and maintain professionalism Ability to interact with management, customers, and suppliers Ability to train others individually and in a group setting Must be able to pass a pre-employment drug screen.

Shape What's Next at Select Custom Solutions At Select Custom Solutions, we don't just make ingredients-we create possibilities. From La Crosse, WI, our team brings innovation and expertise to contract manufacturing, branded dairy and non-dairy ingredients, custom blends, and ingredient distribution. With modern facilities and cutting-edge capabilities, we help some of the world's most trusted brands deliver products that make a difference in people's lives. With a strong focus on growth, innovation, and excellence, Select Custom Solutions offers opportunities to be part of meaningful work that impacts industries worldwide. Whether you're working hands-on in manufacturing or supporting operations, your contributions help drive the future of food and nutrition. We're proud to be partnered with Select Milk Producers, one of the nation's most progressive dairy cooperatives. With over 110 family-owned dairies and multiple processing plants and joint ventures nationwide, our partnership connects us to a powerful network driving the future of food and nutrition. Join us-and help shape what's next. What Select offers you: Comprehensive benefits package focusing on your physical, financial and emotional health to include the following perks as well as the standard benefit offerings (health, dental, vision, etc.): Paid Time Off Paid Holidays Off Uniform Program Shoe Allowance Onsite gym Career Advancement Opportunities Leadership Development Opportunities to support our local communities Chance to apply best practices in sustainability and environmental initiatives Commitment to producing high quality nutritious products and providing nourishment around the world What this role is all about: We are looking for a Quality Control Services Technician in La Crosse, WI. Schedule: Monday Friday, 7:00 AM - 3:00 PM The Quality Control Services Technician assists in collection, approval, maintenance, and documentation of quality and technical information. The Quality Control Services Technician is responsible for ensuring all products (incoming and outgoing) meet quality release standards and responds to ‘out of specification' conditions through investigation and setup of extended testing. Job Duties: Verify that Preventive Controls were performed for all finished product prior to approval for release. Employees in this role are considered Qualified Individuals under Select Custom Solutions' Food Safety Plan. Coordinate with Quality Assurance to ensure the Corrective Actions do not impact finished product food safety or food quality. Create finished product Certificates of Analysis and approve finished product release. Review third party reports and enter test results into the Quality Control Operations Management Portal. Follow up on any delayed or late results. Communicate ingredient and finished product laboratory test results to Customer Experience, Sales, Innovation, Production, Warehouse, and Quality Assurance as necessary to meet shipment deadlines or contribute to projects. Daily direct dialogue with internal and external laboratories. Lead investigations for out of specification laboratory tests. Communicate directly with key customers for specification changes, production/ process deviations, out of specification conditions, and exceptional release of finished product. Compile information and generating reports to be approved by the customer. Enter hold records into the Hold Management database for raw ingredients, finished goods, and expired products. Assist with the creation of new and existing bulk material and finished product specifications. Interpret Change Control requests and update supporting documentation as necessary. This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Qualifications: Education Required: Associate's Degree in a Scientific field required. Bachelor's Degree in a Scientific field preferred. Equivalent combination of education and/or experience will be considered. Experience Required: Minimum two (2) years of laboratory experience preferred. Knowledge of the operation of laboratory equipment required. Where you'll be working: Our La Crosse, WI, plant is home to approximately 330 employees. This facility supplies the food, beverage, and nutritional industries with innovative functional ingredients and superior quality contract manufacturing services. La Crosse, WI, is nestled between the Mississippi River and the rolling river bluffs. This town is home to a plethora of colleges, high-quality health care, community events, and cultural opportunities. If you want to enjoy outdoor activities there are many opportunities, such as hiking, cycling, skiing, and boating. The town hosts multiple events annually and is famously known for their Oktoberfest celebration as well as offering a minor league baseball team. Visit the La Crosse Chamber site ******************************** for more information on local events. AA/EEO - Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity

As a valued Trelleborg team member, you will enjoy: Greater opportunity for impact Competitive compensation Generous benefits package: Health, Dental, Vision, STD, LTD, Life, 401k Paid time off Bonuses Pay and Schedule: $19 - $24 per hour Hours: 6:00am - 2:30pm Monday through Friday Qualifications: High School diploma or equivalent Required: 0-3 years' experience in manufacturing environment Desired: Experience with clean room manufacturing Responsibilities: Conducts inspections to ensure compliance with product specifications. Inspections include visual, dimensional, functional, and physical testing on product from all departments. Performs all duties per appropriate work instructions. Completes required documentation. Verifies packaging and documents for shipping parts. Performs accurate data entry. Collaborates and gathers documentation or data, tests product or materials for root cause analysis, investigations, and drives continuous improvement activities. Communicates orally in a professional, courteous manner. Written communications should be clear and concise. Serves as a good team player. Uses Lean Enterprise methods to reduce waste and complexity in all processes and organizes work area. Ensures work area is clean and safe. Assists with filing or scanning for QA Dept. Able to accurately scan processing records to computer files for archiving.

AMPI owns seven Midwest-based manufacturing plants where 10 percent of the nation's American-type cheese, processed cheese and butter is produced. The cooperative's award-winning cheese, butter and powdered dairy products are marketed to foodservice, retail and food ingredient customers. In 2019, the co-op launched its Dinner Bell Creamery brand and accompanying Co-op Crafted promise, highlighting more than 50 years of dairy farm families partnering with skilled buttermakers and cheesemakers. This internship will allow the qualified candidate to participate in a learning program designed around training into a potential full-time opportunity of a role similar to the one in the description listed below. DoD SkillBridge participants are not eligible for compensation from Associated Milk Producers, Inc, as they continue to receive military compensation and benefits as active-duty service members. ESSENTIAL RESPONSIBILITIES This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time: All AMPI employees have an obligation to report employee safety, food safety and food quality issues to personnel of authority. This position has a heightened food safety and food quality responsibilities. Execute required tests on finished product according to SOPs and customer requirements. Execute required test on incoming ingredients according to QMS (Quality Monitoring Scheme). Responsible for daily/weekly plating, reading, calibration, sample collection, Internal Control Plan, sample preparations, etc. Support investigations on improvement projects (e.g., holds, consumer complaints), helps to identify root causes, and helps to identify corrective actions and monitors for effectiveness. Support training for operators to ensure process checks are accurate and timely as state in QMS. Communicate out-of-specification product results to supervisor. Calibrate lab equipment such as pH meter and scales, etc. according to SOP's. Conduct daily routine sample analyses using lab techniques and other instrumentation following Good Laboratory Practices (GLP). Organize laboratory records and files. Ensures compliance to procedures and work instructions. Ensures correct recording of laboratory and quality records in compliance with SOP's including storage and retrieval of records. Support laboratory activities to ensure that a high quality of products, services, housekeeping, and hygiene standards are maintained and improved in laboratory and other analytical areas. Supports laboratory compliance (calibration, equipment testing, etc.) to SQF and AMPI requirements. Employee shall follow and carry out company policy on all required GMP, quality and food safety requirements and escalate quality or food safety findings or incidents. Support execution of GMP's throughout the plant and follow safety rules and procedures. Support improvement of GMP's throughout the plant and follow safety rules and procedures. Support improvement initiatives (e.g., complaints, holds) for facility. Other duties as assigned.

Job DescriptionDescription: Join a Leader in Sustainable Packaging Innovation! At Arena Products innovation isn't just what we do - it's who we are. As trailblazers in reusable transport packaging, we're redefining how products move through the supply chain while reducing waste and driving sustainability. We're a family-owned business with big impact, serving industries from dairy and fresh produce to non-hazardous chemicals and health & beauty. Our team combines creative design, smart engineering, and advanced manufacturing to deliver packaging solutions that perform better and last longer. We are seeking a detail-oriented and proactive Quality Technician to join our dynamic team. In this role, you will play a vital part in ensuring our products meet the highest standards of quality and safety. If you are passionate about quality assurance and continuous improvement, we invite you to contribute your skills to our innovative organization. Essential Job Functions: Set-up, perform, analyze and report on all phases of product testing based on developed test plans Training staff on rewash & quality inspection related to mold & broken parts. Responsible for maintaining accurate quality related records Provide detailed results of testing and inspections to Depot Manger o ensure quality standards are satisfied Follows all ISO regulations and requirements for testing, GMP inspecting, documenting Reviewing all paperwork for accuracy and completion on a daily, weekly and monthly basis Oversee the implementation of the food safety plan Ensure plant is within compliance by performing, Quarterly Deibel swabs, daily verification of swabs and plates, signing off on weekly Microbial swab paperwork Perform performance audits on current and new products Responsible for plant GMP audits and presenting findings at monthly quality meetings. Other duties as assigned Requirements: Education and Experience: Associate's degree in a technical field, or 1-2 years' experience in quality in lieu of degree Familiarity with ISO and Food Safety standards preferred Knowledge, Skills, and Abilities High level of accuracy and attention to detail Proficient in Microsoft Office Strong written and verbal communication skills Ability to understand and follow Quality Control Specifications Physical Requirements While performing the duties of this job, the employee is frequently required to sit, stand bend, and reach with hands and arms and lift up to 25-35 pounds repetitively. Work Environment Typically, work takes place indoors in a factory, plant, or warehouse setting. These facilities may not always be temperature-controlled. While performing the duties of this job, the employee is occasionally exposed to chemicals and moving mechanical parts. The noise level in the work environment is usually moderate.