Quality control inspector jobs in Lafayette, IN - 54 jobs

A confidential aerospace manufacturer is seeking a Production Quality Inspector to ensure the highest standards of quality and compliance in advanced manufacturing operations. In this role, you will perform inspections on structural assemblies, components, and systems that support critical aerospace and defense programs. This is an onsite position requiring U.S. citizenship or permanent resident status in alignment with federal contract requirements. Key Responsibilities Perform in -process and final inspections to verify products meet engineering drawings and specifications. Validate assembly completion and support production teams with quality checks throughout the build process. Identify defects in surfaces, fasteners, coatings, and systems; document and communicate corrective actions. Compile inspection data, reports, and deviation records for Material Review Board review. Monitor and manage non -conforming materials according to established procedures. Support tooling validation, metrology, and standardized work practices. Maintain a clean, safe, and compliant work environment. Required Qualifications High school diploma or GED required (Associate degree or technical training preferred). Minimum 2 years of quality inspection experience in structural or manufacturing environments, OR equivalent education. VantageClear credential (or equivalent) Ability to read and interpret engineering drawings and specifications. Strong communication and teamwork skills. Must be physically able to perform inspections (standing, climbing, bending, lifting up to 50 lbs). Preferred Qualifications Quality inspection experience in aerospace, automotive, or defense manufacturing. Knowledge of ISO/AS9100 standards and structured quality systems. Familiarity with BACS and other industry specifications. Proficiency with inspection tools, measuring devices, and computer -based reporting.

Job SummaryInspect raw material and/or parts, audit production practices and processes, and report on non-conformances.Job Description Key Accountabilities: Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions. Segregate non-conforming parts or material. Complete required documentation for work performed. Perform data entry of work results into appropriate databases. Perform final inspection to reconcile outgoing shipments, as required. May be required to identify causes of non-conformance. This is a position that works directly on the warehouse floor on or around heavy machinery. Meet TKMNA Employee Attributes / Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: High school diploma or equivalent Ability to read and write English and perform basic math problems Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) Basic computer knowledge to complete data entry Attention to detail and accuracy Ability to accurately inspect basic material, commodities, and/or processes Safety Mindset. Preferred requirements: Some college courses or certificates in Quality Assurance-related field of study Prior experience using basic measurement instruments Prior experience in a quality assurance inspection position Benefits Overview We offer competitive company benefits to eligible positions, such as : Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) and RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

At Saab in West Lafayette, IN, you have the opportunity to join a team that manufactures the rear section of the T-7A Redhawk military trainer aircraft for the United States Air Force. This flagship facility utilizes advanced manufacturing techniques and leverages research and development to support Saab's broad product portfolio. As Saab continues to expand their team in West Lafayette, IN, we are currently seeking a Quality Inspector to support the operation. Responsibilities include: Authorize assembly process completion and support the assembly team with in-process inspections during the build process Validate, visually and dimensionally, that the product meets requirements compared to engineering drawings Inspect for defects in surfaces, fasteners, sealant, paint, and testing Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions Develop deviation reports and represent quality at the Material Review Board Responsible for monitoring non-conforming material processes and procedures Deliver high level of workmanship in inspection processes for structural assembly and system installations Participate in tooling validation and application to meet product requirements in quality and efficiencies Support metrology measures as needed Develop standardization for working procedures for high repeatability Contribute to a people-first culture in alignment to Saab values, demonstrating core Company values: Trust, Drive, Expertise, and Support Other tasks as assigned and authorized. Compensation: Base hourly rate up to $25.00 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required 2+ years of quality inspection experience in structural manufacturing or an Associate's degree is required Quality inspection experience in aeronautics or automotive manufacturing field preferred Technical degree or certification in the field of air structure assembly or related technical field is a plus Experience with ISO/AS9100 and highly standardized processes preferred Working knowledge of industry customer BACS is a plus Strong communication skills and ability to work as part of a high-performance team Proficiency interpreting engineering drawings and specifications in written and digital format is a plus Experience executing appropriate working methods and selecting the correct tools to achieve quality and efficiency standards Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment Must be self-mobile and able to stand for extended periods Ability to perform physical tasks such as bending, stooping, twisting, grasping, gripping, standing, walking, kneeling, climbing, and reaching throughout a normal work shift Ability to regularly lift up to 25 pounds, and up to 50 pounds on occasion Hearing and vision within normal ranges is necessary for accurate quality product inspection Ability to work extended hours and weekend overtime when required Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

At Saab in West Lafayette, IN, you have the opportunity to join a team that manufactures the rear section of the T-7A Redhawk military trainer aircraft for the United States Air Force. This flagship facility utilizes advanced manufacturing techniques and leverages research and development to support Saab's broad product portfolio. As Saab continues to expand their team in West Lafayette, IN, we are currently seeking a Quality Inspector to support the operation. Responsibilities include: Authorize assembly process completion and support the assembly team with in-process inspections during the build process Validate, visually and dimensionally, that the product meets requirements compared to engineering drawings Inspect for defects in surfaces, fasteners, sealant, paint, and testing Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions Develop deviation reports and represent quality at the Material Review Board Responsible for monitoring non-conforming material processes and procedures Deliver high level of workmanship in inspection processes for structural assembly and system installations Participate in tooling validation and application to meet product requirements in quality and efficiencies Support metrology measures as needed Develop standardization for working procedures for high repeatability Contribute to a people-first culture in alignment to Saab values, demonstrating core Company values: Trust, Drive, Expertise, and Support Other tasks as assigned and authorized. Compensation: Base hourly rate up to $25.00 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required 2+ years of quality inspection experience in structural manufacturing or an Associate's degree is required Quality inspection experience in aeronautics or automotive manufacturing field preferred Technical degree or certification in the field of air structure assembly or related technical field is a plus Experience with ISO/AS9100 and highly standardized processes preferred Working knowledge of industry customer BACS is a plus Strong communication skills and ability to work as part of a high-performance team Proficiency interpreting engineering drawings and specifications in written and digital format is a plus Experience executing appropriate working methods and selecting the correct tools to achieve quality and efficiency standards Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment Must be self-mobile and able to stand for extended periods Ability to perform physical tasks such as bending, stooping, twisting, grasping, gripping, standing, walking, kneeling, climbing, and reaching throughout a normal work shift Ability to regularly lift up to 25 pounds, and up to 50 pounds on occasion Hearing and vision within normal ranges is necessary for accurate quality product inspection Ability to work extended hours and weekend overtime when required Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

ABOUT COMPAL We are in the business of collaborative innovation and making those ideas happen. As one of the world's leading manufacturers of notebook PCs, smart devices, data center equipment and LCD products, and automotive electronics, we take pride in bringing breakthrough design concepts to life with world class R&D, manufacturing, and supply chain management. Innovation is in our DNA and no challenge is too big for our award-winning design teams. Unparalleled experience across a broad range of technologies translates into projects being delivered with the highest design integrity and quality. Compal has 80,000 employees across 8 countries in USA, Mexico, Brazil, Poland, India, China, Vietnam, and Taiwan to provide engineering, manufacturing, service support to our customers. OUR CULTURE We believe innovation happens when people do what they love and have the opportunity to grow. Compal is powered by some of the brightest talent from around the world, working together to push creative and technical boundaries on behalf of our clients and their products. Every day we strive to create an environment where people can grow and learn from each other, while receiving the support to do the best while working on what they love. ABOUT THE ROLE The Quality Technician plays a key role in ensuring compliance with customer, industry, and internal quality standards in printed circuit board assembly (PCBA) manufacturing. This position has a strong focus on process audits, ESD compliance auditing, and initial investigation of material and process issues. The Quality Technician documents findings and reports directly to the Quality Engineer, supporting corrective actions and continuous improvement efforts. Major responsibilities: Perform process audits across PCBA manufacturing operations to verify compliance with work instructions, quality standards, and regulatory requirements. Conduct ESD (Electrostatic Discharge) audits to ensure personnel, workstations, and equipment meet established ESD controls. Perform initial investigations of material issues or process issues identified during production, including defect containment, data collection, and communication of findings. Document and communicate inspection, audit, and investigation results, and report findings to the Quality Engineer for review and action. Carry out in-process, first article, and final inspections of PCBs to verify compliance with IPC-A-600, IPC-A-610, and customer requirements. Issue non-conformance reports (NCRs) and assist with root cause and corrective action activities under guidance of the Quality Engineer. Monitor adherence to ISO 9001, IATF 16949, and customer-specific quality requirements. Support calibration and maintenance of inspection/test equipment, ensuring accurate and reliable measurements. Collaborate with production staff and supervisors to provide feedback on quality issues, recommend corrective actions, and reinforce best practices. Participate in continuous improvement initiatives to strengthen process controls, reduce defects, and improve yields. DESIRED QUALIFICATIONS: High school diploma or equivalent; associate degree or technical training in electronics, quality, or manufacturing preferred. Experience in PCBA manufacturing or electronics assembly environment strongly preferred. Familiarity with IPC-A-600 and IPC-A-610 acceptance standards. Prior experience in process auditing, ESD auditing, or material/process investigations is highly desirable. Understanding of ISO 9001 and IATF 16949 quality management systems. Strong analytical, problem-solving, and organizational skills. Effective verbal and written communication skills for reporting and cross-functional collaboration. WORK ENVIRONMENT: Combination of production floor and inspection/office environment. Requires use of microscopes, precision measuring instruments, and test equipment. May involve standing, sitting, or bending for extended periods; occasional overtime as needed to meet customer deadlines. TRAVEL: Less than 10% BENEFITS AT COMPAL USA (INDIANA) Inc. Medical, dental vision and prescription drug insurance Life insurance Short- and long-term disability Excellent 401k plan with matching contributions Generous PTO policy Company paid holidays Compal USA (Indiana) Inc. is an equal-opportunity employer and is committed to providing a workplace free from harassment and discrimination. All employment is decided on the basis of qualifications, merit, and business need without regard to any protected status.

. What You'll be Doing: This position will conduct building inspections/assessments, based on APPA cleaning standards and service level commitments utilizing specialized software. Plan and schedule inspections to ensure their timely completion, while also maintaining the integrity of the quality assurance database. Clearly communicate results of inspections to staff and leadership while offering suggestions for future improvement. Provide small group, departmental process training. Plan, schedule, and conduct building inspections based on the APPA cleaning standards and service level commitments utilizing specialized software. Responsible for the accuracy and timeliness of building inspections and the quality assurance database. Evaluate and verify that the work performed meets the University standard. Apply Today! Join a team that keeps Purdue University's campus beautiful year-round and enjoy a benefits package designed for you and your family: * Paid Time Off - Generous vacation, holiday, sick, and military leave * Retirement Contributions - Purdue contributes up to 8% of your annual income * Educational Opportunities - Tuition assistance for you and eligible family members, including the opportunity to earn a degree through Purdue Global. * Comprehensive Insurance - Medical, dental, and vision coverage to keep you and your family healthy * Life Insurance - Financial protection for you and your loved ones Schedule: Monday-Friday, 5:00 am to 1:30 pm Hourly Pay: $19.25 What We Are Looking For: Education and Experience Qualified Candidates Will Need: * High school diploma or equivalent * 4+ years of relevant work experience * Must have completed Building Services Custodial Development Program, or be enrolled in program within 90 days of hire * Ability to train small (3 - 10) groups * Ability to read, write and speak English * Must be able to communicate effectively with supervisor, co-workers, and customers both verbally and in writing * Ability to read, write and perform basic mathematics and effectively communicate via a computer * Good work organization ability * Knowledge of policies and procedures regarding custodial cleaning and safety * Personal protective equipment may be required during specific work duties as determined by the department * Ability to lift and carry 25-50 lbs. frequently, and up to 60 lbs. occasionally required * Ability to work efficiently and professionally in a fast paced and diverse team setting * Will work outdoors 10% of the time in temperatures below 32 degrees or above 90 degrees * A valid US or Canadian driver's license What's Nice to Have: * High school diploma/GED * One year of supervision experience * Knowledge of campus buildings and locations * Highly motivated and possess the ability to use independent judgement in the completion of assigned duties * Must be able to compile data, identify problems, analyze information, and develop and implement solutions * Possess excellent organizational/time management skills, prioritize/balance multiple tasks with deadlines, and handle confidential information with discretion * Must be able to work independently and as part of a team * Must be able to apply general rules to specific problems and identify answers that make sense * Expect to manage their work load with little to no supervision What We'd Like You To Know: * To learn more about Purdue's benefits summary CLICK HERE * Purdue will not sponsor employment authorization for this position * A background check will be required for employment in this position * FLSA: Non-Exempt (Eligible For Overtime) * Retirement Eligibility: Non-exempt Defined Contribution Plan Career Stream * Administrative and Operational Support 3 * Pay Band S045 * Job Code# 20002365 Career Path Maker: ****************************************** Who We Are: Purdue is a community built on collaboration, with global perspectives, Boilermaker pride and endless opportunity to live, learn and grow. Join us and contribute to our culture. Equal Opportunity Employer: Purdue University is an EA/EO employer. Apply now Posting Start Date: 12/23/25

TRIGO Global Quality Solutions has an immediate opening for a Quality Inspectors in Mossville, IL. Pay is $18.50-20hr and it is 2nd shift. Reports to Site Supervisor/Site Leads Quality Inspector Responsibilities (To include but not limited to the following) Client Relationship & Business Development * The Quality Inspector acts as an impartial third party between the production source and the customer facility to ensure the product meets set criteria. Operations * The Quality Inspector performs quality inspection / quality audits on incoming material using hand gaging and visual techniques to determine conformance to specifications and fitness for use. * Contains non-conforming parts and/or sub-assemblies. * Rectifies non-conforming material by rework, sorting and/or scrapping as directed by Team Leader. * Uses methods such as de-rusting, grinding, drilling, tapping, assembly and/or disassembly to rectify non-conforming material. * Determines the tools and equipment needed to do the job. * Grinds, sands, cleans and oils parts and/or sub-assemblies by using hand tools or equipment. Organization & Management * Communicate sort/inspection results to managers, supervisors and production source. Technical * MUST be able to use basic hand tools such as gaging, drills, taps, grinders and/or sanders to repair and/or clean parts and/or sub-assemblies. * Utilize company portal for time recording and policy acknowledgements. Knowledge, skills, abilities Hard skills * Proficiency in English * Excellent written and verbal communications skills * Ability to Coordinate, prioritize and multitask * Demonstrated flexibility within a fast-paced, challenging environment * Ability to take initiative and recognize needs * Ability to handle highly sensitive and confidential material * Ability lift /move 30 pounds * Must have reliable transportation Work experience Overall recommendations * 1+ year in Quality related position. * Basic knowledge of materials and production processes. * Basic knowledge of quality control methods. Education background Overall recommendations * High School Diploma or Equivalent About TRIGO Global Quality Solutions * Founded in 1997 * 10,000 professionals in 20+ countries worldwide * Serves the automotive, aerospace and heavy transportation industries * Offers quality control & supply chain services including inspection, logistics, auditing, consulting & training * The leading quality solutions provider, trusted by the world's top 10 automotive & aerospace companies TRIGO Global Quality Solutions is committed to equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Job Description Graywolf Integrated Construction is seeking traveling QA/QC CWI Pipe & Structural Steel Inspectors to be assigned to in Lebanon, IN Graywolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers. The QA/QC Inspector role provides quality inspections regarding welding and welder's certifications, pressure vessels, heat exchangers and boilers, piping, mechanical equipment, painting and coatings, structural steel and fabricated materials. Essential Duties: Experience or working of the following codes; ASME B&PV, ASME B31.1 and B31.3, NBIC,API, AWS, ACI, AISC, RCSC and others as determined by job requirements. Ability to read and interpret various codes, standards and specifications. Familiarity, experience, or previous training and certification in Liquid Penetrant testing, Magnetic Particle testing, Ultrasonic testing, and radiography. Inspector has responsibility for the performance and scheduling of all inspection and testing activities as defined by contract. Willingness to attend training and acquire additional training and certifications as required. Assess sub-contractors' capabilities to meet the quality requirements of the project as required. Assure that the contract obligations' for testing and record keeping are adhered to. Control calibrated measuring and test equipment used on the project. Keep calibration records and ensure that all testing equipment has current calibration records. Ensure proper turnover of complete quality control package(s). Responsible for ensuring that turnover documentation is maintained, organized and turned over on schedule and scanned into the database. Maintain project quality records for the construction phase of the project and quality audit plans, performance and management thereof. Perform evaluations of sub-contractors' facilities to determine their capabilities in meeting the quality requirements. Conduct periodic Quality Program training and coaching for site supervisory personnel. All other duties as normally required by our QA/QC Department, and as required by day-to-day business Qualifications: Four (4) years of formal training and experience in heavy industrial projects such as refineries, petro- chemical complexes, power plants, etc. CWI required. Experience in understanding WPSs, PQRs, and WPQs Ability to effectively interact with project team members, clients, subcontractors and craft employees. Must be capable of obtaining or possess inspection licenses and/or certifications as required. Read, write and communicate using English language sufficient to perform job functions as required by client and/or facility policy Must be able to communicate and document via company web mail programs Must be able to successfully complete all required pre-hire requirements. Physical/Site Requirements: Lift and carry heavy items weighing up to 45 pounds. Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age. Work up to a 12-hour shift in varying temperature extremes and other outside conditions. Climb and maintain balance on steel framework, stairs, ladders, and scaffolds. Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Reports to Site Supervisor/Site Leads Quality Inspector Responsibilities (To include but not limited to the following) Client Relationship & Business Development The Quality Inspector acts as an impartial third party between the production source and the customer facility to ensure the product meets set criteria. Operations The Quality Inspector performs quality inspection / quality audits on incoming material using hand gaging and visual techniques to determine conformance to specifications and fitness for use. Contains non-conforming parts and/or sub-assemblies. Rectifies non-conforming material by rework, sorting and/or scrapping as directed by Team Leader. Uses methods such as de-rusting, grinding, drilling, tapping, assembly and/or disassembly to rectify non-conforming material. Determines the tools and equipment needed to do the job. Grinds, sands, cleans and oils parts and/or sub-assemblies by using hand tools or equipment. Organization & Management Communicate sort/inspection results to managers, supervisors and production source. Technical MUST be able to use basic hand tools such as gaging, drills, taps, grinders and/or sanders to repair and/or clean parts and/or sub-assemblies. Utilize company portal for time recording and policy acknowledgements. Knowledge, skills, abilities Hard skills · Proficiency in English · Excellent written and verbal communications skills · Ability to Coordinate, prioritize and multitask · Demonstrated flexibility within a fast-paced, challenging environment · Ability to take initiative and recognize needs · Ability to handle highly sensitive and confidential material · Ability lift /move 30 pounds · Must have reliable transportation Work experience Overall recommendations 1+ year in Quality related position. Basic knowledge of materials and production processes. Basic knowledge of quality control methods. Education background Overall recommendations High School Diploma or Equivalent About TRIGO Global Quality Solutions Founded in 1997 10,000 professionals in 20+ countries worldwide Serves the automotive, aerospace and heavy transportation industries Offers quality control & supply chain services including inspection, logistics, auditing, consulting & training The leading quality solutions provider, trusted by the world's top 10 automotive & aerospace companies TRIGO Global Quality Solutions is committed to equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Job title: Ready Mix Concrete Quality Control Technician Reports to: Quality Control Manger Shelby Materials Shelby Materials is a central Indiana supplier that offers ready-mix concrete and aggregate materials for various construction projects. Their services cover a wide range, from large industrial buildings and infrastructure to residential construction. Additionally, they supply specialty blends for golf courses and athletic facilities. Job Description As a quality control technician, you will play a key role in ensuring the quality and consistency of our ready-mix concrete. You will be responsible for conducting on-site and lab testing to ensure compliance with all applicable ASTM, ACI, & Job Specific Standards. Duties and Responsibilities Perform field testing on freshly mixed concrete batches for workability, slump, air content, temperature, and other specified properties. Communicating with customers on job sites, relaying relevant information to them and help in managing pours and directing trucks. Conduct sampling and testing of hardened concrete specimens for compressive strength, density, and durability. Document and record test results accurately and maintain detailed records of all testing activities. Monitor production processes and adjust mix designs as necessary to meet quality standards. Work with production and quality control teams to troubleshoot issues and optimize mix designs. Comply with safety protocols and quality control procedures at all times Key Skills Skills Needed Include: Ability to interpret technical specifications and communicate them effectively Detail-oriented with strong analytical and problem-solving skills. Physical stamina to work in outdoor environments and lift/move heavy materials as needed. Ability to perform basic math functions by memory. Valid driver's license and clean driving record. Qualifications Qualifications include: One year experience as a concrete field testing technician, or a similar role in the construction industry High school diploma or equivalent; additional technical training, certification in concrete technology, or ACI certification is preferred. Knowledge of concrete testing methods, equipment, and relevant ASTM/ACI standards. Compensation/Benefit Package Benefits of working at Shelby Materials include: Competitive compensation package based on experience and qualifications. Traditional 401(k) / Roth 401(k) retirement plans with 6% employer match Health Insurance with low premiums and multiple plans Health Savings Account (HSA) with employer matching Voluntary wellness program with guaranteed employer payout with participation Paid holidays and PTO days Employer-provided PPE, safety equipment, high visibility workwear.

This position performs Quality Assurance (QA) tests and laboratory checks to ensure finished products are meeting food safety regulations and product specifications at all times. At any time duties and responsibilities may be added, modified, or changed at the discretion of management - formally or informally, verbally or in writing - due to the nature of a food manufacturing business. Essential Duties and Responsibilities: •Follow and comply with applicable good manufacturing, safety, and quality assurance practices. •Follow and comply with applicable regulatory standards (State Health Dept., FDA, USDA, etc.) •Monitor cleaning records and frequencies •Develop and implement food safety programs related to production •Follow-up on customer complaints and correspond with production and sales related to complaints •Monitor accuracy of analytical testing and ensure the product is compliant with product specification •Manage product specifications •Maintain documentation from suppliers related to food safety •Maintain resources related to regulatory compliance and product requirements •Maintain and implement policies and procedures relating to GMP's, food safety and regulatory compliance •Perform all required job duties at a consistent pace, long periods of time on feet and an environment where temperatures range between 35F - 100F degrees. •Conducts routine checks and testing in support of company policies and procedures, including but not limited to environmental swabbing, temperature checks and calibration checks for all assigned areas and equipment •Deviations from QC programs in area of responsibility shall be brought to the attention of the Plant QA Director immediately. Recommend corrective actions on product not meeting quality standards. Be thoroughly familiar with product specifications for quality purposes. •Responsible for assisting with in-plant organoleptic testing. Must become knowledgeable about all equipment used in the processing areas. •Ensures product integrity through inspections and testing. •Be aware of and report non-compliance with GMP's and federal regulations regarding handling of products, proper clothing and hand washing rules. •Be vigilant to prevent actions leading to injuries or accidents. Report any safety violations. •Monitors labeling of finished product shipping bins to assure correct shipping of products for further processing. •Other duties as assigned. These positions operate on 12 hour shifts, 3 days per week on a rotating schedule • Multiple shift times available • Over time may be required Knowledge, Skills, and Abilities: •Exceptional attention to detail and strong organizational skills •Ability to adapt effectively within a continually changing and demanding environment •Must be able to demonstrate an ability and willingness to communicate effectively in order to maintain high levels of safety, quality, and efficiency •Demonstrate ability to effectively manage multiple tasks and duties as they relate to food safety and regulatory compliance •Exceptional leadership characteristics, communication skills, and ability to interact with management and employees Education and Experience: •High School degree required. Prefer Associates Degree in Food Science, Production or related field. •Or at least 5 years experience in Production with an emphasis in Quality Systems Benefits Park 100 Foods also offers a comprehensive benefit package which includes, but is not limited to: Medical, Dental, and Vision plans Group life insurance PTO Flexible Spending Accounts 401k with employer match Prescription drug coverage Equal Employment Opportunity: Park 100 Foods is an Equal Opportunity Employer.

1st shift: 6:30 am - 3pm Starting pay $17/hr. (Temp to hire) After 90 days, $18/hr. Job Summary:We are seeking a detail-oriented and hands-on Quality Inspector who will also be responsible for performing rework on non-conforming products. This dual role involves inspecting products at various stages of production to ensure they meet quality standards, identifying defects, and performing corrective actions to bring products into compliance.Key Responsibilities:Quality Inspection: Conduct inspections of incoming materials, in-process components, and finished products. Record inspection results and maintain accurate quality documentation. Report and document non-conformances and collaborate with the production team to determine root causes. Assist in audits, process validations, and quality improvement initiatives. Rework & Repair: Perform hands-on rework on defective or non-conforming products based on established procedures or work instructions. Document rework activities, including materials used and time spent. Collaborate with engineering or quality teams to develop or update rework procedures. Ensure reworked items meet all quality standards before release. Qualifications: High school diploma or equivalent. 2+ years of experience in quality inspection, manufacturing, or a similar role. Experience with rework or repair of mechanical, electronic, or assembly-based products is a strong plus. Proficient in reading technical drawings, work instructions, and inspection documentation. Strong attention to detail and commitment to product quality. Basic computer skills for data entry and report generation. Working Conditions: This role may require standing for extended periods and working with small parts or tools. Use of personal protective equipment (PPE) may be required depending on the work environment. Occasional lifting of up to 30 lbs. #Indy

Job Description Responsibilities • Support receiving inspection process including visual and dimensional verification of mechanical assemblies per engineering requirements and operations schedules. Complete and electronically store receiving inspection checklists. • Utilize calipers, tape measures, blueprints, and Microsoft excel. • Perform data collection/analysis and electrical hardware functionality/verification per work instructions, checklists, and engineering requirements. Utilize Microsoft Excel, Word, and PowerPoint, multimeters, test fixtures, tape measures, CAN-testing tools, and proprietary software. • Ensure that each final assembly has a complete quality document package including completed checklists, data files and product pictures. • Ensure that non-conforming products are identified appropriately with a complete description and inform the appropriate department. Ensure that deviations from requirements, if applicable, are approved prior to acceptance of product. Qualifications • Must be able to organize and prioritize job related duties based upon operations schedules. • Ability to handle dynamic priorities and remain flexible. • Must have the ability to work independently and self-motivated • Must have excellent oral/written communication skills. Ability to communicate clearly with multiple departments. Must have proficient use of computers and Microsoft Office suite • Must be able to use basic hand tools including wrenches, drivers, and riveters • Must be able to lift 50 pounds, sometimes in a twisting or bending form. • High school diploma minimum. Electrical background is a plus • Mon-Fri 7AM to 3:30PM core hours • Occasional overtime including weekends required

Company: Bryan Steam At Bryan Steam LLC we pride ourselves on providing world leading craftsmanship to satisfy the needs of our customers around the world. Our team is passionate about growth, quality and teamwork. We believe in continuous improvement. If you are a self-starter and like resolving tough challenges, you might be a great fit for our team. We are seeking a Quality Technician to join our team! This position assists in a variety of laboratory tests on assigned projects. You would assist in fabrication and testing of prototype boilers. Conduct tests and record data in accordance with procedures outlined by advisory or regulatory agencies. This position assists with request for technical assistance from customers and salespersons concerning Bryan Steam produced products and or services. Essential duties and responsibilities include the following: other duties may be assigned: * Must be able to travel out of state with short notice * Set up boilers and burners according to standard test procedures of ANSI/CSA (American National Standard) IBR (Institute of Boiler and Radiation Manufacturers), SBI (Steel Boiler Institute), or similar advisory or regulatory agency. * Conduct tests and record data in accordance with procedures outlined by these agency requirements. * Fabricate simple parts and models from drawings for prototype testing- perform basic pipe fitting, welding, assembly and adjustment of units to obtain proper operation. * Wire electric controls for burners and boilers to ensure proper operator and safety. * Assist in other laboratory functions as required, including maintenance and calibration of equipment and general clean-up. * Other duties as needed Qualifications/Requirements: * One year certificate from college or technical school; or three to six months related experience/training or combination. * Be able to read and understand prints * Problem solving skills * Team player * Self-motivated and goal oriented * Need to be able to multitask * Strong communication skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to sit; reach with hands and arms; bend, stoop, kneel crouch, talk and hear, stand for long periods of time; walk and climb up stairs/steps. The employee must regularly lift and/or move up to 25 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of a production worker. While performing the duties of the job, the employee may be exposed to moving mechanical parts, forklift traffic, hot sand, loud noise, chemicals, high temperatures, hot surfaces, molten metal, sharp objects or edges, grinding with wheels and carbides, silica dust and water. We offer a comprehensive benefits package including, but not limited to: * Medical, dental, and vision coverage * 401(k) plan * Weekly pay * Paid holiday * Vacation * Prescription safety glasses * Short term disability * Life insurance * Employee Assistance Program

A Team Member in the Quality Assurance Technician position will complete and document quality control audits, monitor adherence to USDA regulations verifying HACCP and SSOP task while enforcing hygiene behaviors. Individuals must be able to assure pertinent, accurate and timely collection of data from all processes in the plant to aid operations in decision making, as well as continuously striving for improvement. First shift hours are from 5:00am-3:00pm. Responsibilities: * Complete and document primal and sub-primal quality control audits including weights, measurements, and visual assessments of raw pork products * Release or retain product based on audit results, including informing production supervision * Monitor adherence to USDA regulations by monitoring and verifying HACCP and SSOP tasks * Perform monitoring and verification tasks prescribed in HACCP and SSOP plans, including monitoring and enforcing employee hygiene behaviors * Complete other QA inspections including but not limited to boneless meat inspections, ambient and product temperature monitoring, Xray and metal detector function checks, chemical concentration verifications, inspection of packaging materials, animal handling audits, process, and procedural verifications * Commitment to complete tasks on time to achieve goals * Collaborate with co-workers, supervisors, and managers by maintaining a positive work atmosphere putting the success of the team above own interest * All team members are expected to adhere to their scheduled working hours and attend work consistently to ensure smooth operation and effective teamwork Qualifications: * Associates degree in related field preferred * 2 years of previous meat facility experience preferred * Trustworthy and highly ethical * Must be a self-started and able to work with limited supervision, strong work record and excellent attendance is a must * Demonstrated strong attention to detail * Must be available to work overtime, weekends and holidays as required for 24-hours operation * Must have strong leadership capabilities with excellent communication skills, allowing for positive working relationships within close working environments. * Demonstrated objectivity and openness to others' views, receiving and providing feedback in a positive manner Work Environment: While performing the duties of this job, the team member is occasionally exposed to a variety of extreme conditions on the site including exposure to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud and hearing protection is required. The position regularly works near moving mechanical parts and in hot and cold, and outdoor conditions that include inclement weather, and exposure to dust. Physical Demand: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The position lifts heavy objects up to 30 lbs., walks and stands for long periods of time and performs strenuous physical labor under adverse field conditions. The team member lifts, pushes, pulls, or carries objects; uses abdominal and lower back muscles to provide support without fatigue. The position requires good manual dexterity (hand, hand with arms and fingers, two hands) and multi-limb coordination. The position requires the ability to quickly move arms and legs. Team members must have excellent stamina and vision and be able to work from heights. Other Duties: This job description is not designated to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties and responsibilities may change at any time with or without notice. Benefits and Pay: * Health insurance including three health care options (including an HSA) * Two Dental Insurance Options * Two Vision Options * 401K plan with company match * Tuition Reimbursement * Competitive hourly wage. * Monday-Friday with some weekend work. * On-the-job training provided. * Discounts on company products in our employee store. * Opportunity to gain experience in the food processing industry. The Quality Assurance Technician second shift position earns a competitive wage of $22.83 per hour. OUR COMPANY: INDIANA PACKERS CORPORATION Indiana Packers Corporation (IPC) is a fully integrated retail, food service and private label producer of fresh and processed meats company. IPC is majority owned, by Mitsubishi Corporation, Japan's largest trading company with more than 60,000 team members. As a company, we are growing; in the past five years, we've grown by more than 50% to almost 3,000 team members with 4 primary processing facilities. We value diversity, innovation, collaboration and those passionate about their jobs. Are you ready to step up to the challenge of launching your career with Indiana Packers? Location This factory position is in Delphi Indiana (6755 W 100 N Delphi, IN 46923), a short drive from Lafayette Indiana & Purdue University. EOE, including Disability/Veteran Hiring Immediately INDHRE

Graywolf Integrated Construction is seeking traveling QA/QC CWI Pipe & Structural Steel Inspectors to be assigned to in Lebanon, IN Graywolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers. The QA/QC Inspector role provides quality inspections regarding welding and welder's certifications, pressure vessels, heat exchangers and boilers, piping, mechanical equipment, painting and coatings, structural steel and fabricated materials. Essential Duties: Experience or working of the following codes; ASME B&PV, ASME B31.1 and B31.3, NBIC,API, AWS, ACI, AISC, RCSC and others as determined by job requirements. Ability to read and interpret various codes, standards and specifications. Familiarity, experience, or previous training and certification in Liquid Penetrant testing, Magnetic Particle testing, Ultrasonic testing, and radiography. Inspector has responsibility for the performance and scheduling of all inspection and testing activities as defined by contract. Willingness to attend training and acquire additional training and certifications as required. Assess sub-contractors' capabilities to meet the quality requirements of the project as required. Assure that the contract obligations' for testing and record keeping are adhered to. Control calibrated measuring and test equipment used on the project. Keep calibration records and ensure that all testing equipment has current calibration records. Ensure proper turnover of complete quality control package(s). Responsible for ensuring that turnover documentation is maintained, organized and turned over on schedule and scanned into the database. Maintain project quality records for the construction phase of the project and quality audit plans, performance and management thereof. Perform evaluations of sub-contractors' facilities to determine their capabilities in meeting the quality requirements. Conduct periodic Quality Program training and coaching for site supervisory personnel. All other duties as normally required by our QA/QC Department, and as required by day-to-day business Qualifications: Four (4) years of formal training and experience in heavy industrial projects such as refineries, petro- chemical complexes, power plants, etc. CWI required. Experience in understanding WPSs, PQRs, and WPQs Ability to effectively interact with project team members, clients, subcontractors and craft employees. Must be capable of obtaining or possess inspection licenses and/or certifications as required. Read, write and communicate using English language sufficient to perform job functions as required by client and/or facility policy Must be able to communicate and document via company web mail programs Must be able to successfully complete all required pre-hire requirements. Physical/Site Requirements: Lift and carry heavy items weighing up to 45 pounds. Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age. Work up to a 12-hour shift in varying temperature extremes and other outside conditions. Climb and maintain balance on steel framework, stairs, ladders, and scaffolds. Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job title: Ready Mix Concrete Quality Control Technician Reports to: Quality Control Manger Shelby Materials Shelby Materials is a central Indiana supplier that offers ready-mix concrete and aggregate materials for various construction projects. Their services cover a wide range, from large industrial buildings and infrastructure to residential construction. Additionally, they supply specialty blends for golf courses and athletic facilities. Job Description As a quality control technician, you will play a key role in ensuring the quality and consistency of our ready-mix concrete. You will be responsible for conducting on-site and lab testing to ensure compliance with all applicable ASTM, ACI, & Job Specific Standards. Duties and Responsibilities Perform field testing on freshly mixed concrete batches for workability, slump, air content, temperature, and other specified properties. Communicating with customers on job sites, relaying relevant information to them and help in managing pours and directing trucks. Conduct sampling and testing of hardened concrete specimens for compressive strength, density, and durability. Document and record test results accurately and maintain detailed records of all testing activities. Monitor production processes and adjust mix designs as necessary to meet quality standards. Work with production and quality control teams to troubleshoot issues and optimize mix designs. Comply with safety protocols and quality control procedures at all times Key Skills Skills Needed Include: Ability to interpret technical specifications and communicate them effectively Detail-oriented with strong analytical and problem-solving skills. Physical stamina to work in outdoor environments and lift/move heavy materials as needed. Ability to perform basic math functions by memory. Valid driver's license and clean driving record. Qualifications Qualifications include: One year experience as a concrete field testing technician, or a similar role in the construction industry High school diploma or equivalent; additional technical training, certification in concrete technology, or ACI certification is preferred. Knowledge of concrete testing methods, equipment, and relevant ASTM/ACI standards. Compensation/Benefit Package Benefits of working at Shelby Materials include: Competitive compensation package based on experience and qualifications. Traditional 401(k) / Roth 401(k) retirement plans with 6% employer match Health Insurance with low premiums and multiple plans Health Savings Account (HSA) with employer matching Voluntary wellness program with guaranteed employer payout with participation Paid holidays and PTO days Employer-provided PPE, safety equipment, high visibility workwear.

Responsibilities • Support receiving inspection process including visual and dimensional verification of mechanical assemblies per engineering requirements and operations schedules. Complete and electronically store receiving inspection checklists. • Utilize calipers, tape measures, blueprints, and Microsoft excel. • Perform data collection/analysis and electrical hardware functionality/verification per work instructions, checklists, and engineering requirements. Utilize Microsoft Excel, Word, and PowerPoint, multimeters, test fixtures, tape measures, CAN-testing tools, and proprietary software. • Ensure that each final assembly has a complete quality document package including completed checklists, data files and product pictures. • Ensure that non-conforming products are identified appropriately with a complete description and inform the appropriate department. Ensure that deviations from requirements, if applicable, are approved prior to acceptance of product. Qualifications • Must be able to organize and prioritize job related duties based upon operations schedules. • Ability to handle dynamic priorities and remain flexible. • Must have the ability to work independently and self-motivated • Must have excellent oral/written communication skills. Ability to communicate clearly with multiple departments. Must have proficient use of computers and Microsoft Office suite • Must be able to use basic hand tools including wrenches, drivers, and riveters • Must be able to lift 50 pounds, sometimes in a twisting or bending form. • High school diploma minimum. Electrical background is a plus • Mon-Fri 7AM to 3:30PM core hours • Occasional overtime including weekends required

Company: Bryan Steam At Bryan Steam LLC we pride ourselves on providing world leading craftsmanship to satisfy the needs of our customers around the world. Our team is passionate about growth, quality and teamwork. We believe in continuous improvement. If you are a self-starter and like resolving tough challenges, you might be a great fit for our team. We are seeking a Quality Technician to join our team! This position assists in a variety of laboratory tests on assigned projects. You would assist in fabrication and testing of prototype boilers. Conduct tests and record data in accordance with procedures outlined by advisory or regulatory agencies. This position assists with request for technical assistance from customers and salespersons concerning Bryan Steam produced products and or services. Essential duties and responsibilities include the following: other duties may be assigned: Must be able to travel out of state with short notice Set up boilers and burners according to standard test procedures of ANSI/CSA (American National Standard) IBR (Institute of Boiler and Radiation Manufacturers), SBI (Steel Boiler Institute), or similar advisory or regulatory agency. Conduct tests and record data in accordance with procedures outlined by these agency requirements. Fabricate simple parts and models from drawings for prototype testing- perform basic pipe fitting, welding, assembly and adjustment of units to obtain proper operation. Wire electric controls for burners and boilers to ensure proper operator and safety. Assist in other laboratory functions as required, including maintenance and calibration of equipment and general clean-up. Other duties as needed Qualifications/Requirements: One year certificate from college or technical school; or three to six months related experience/training or combination. Be able to read and understand prints Problem solving skills Team player Self-motivated and goal oriented Need to be able to multitask Strong communication skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to sit; reach with hands and arms; bend, stoop, kneel crouch, talk and hear, stand for long periods of time; walk and climb up stairs/steps. The employee must regularly lift and/or move up to 25 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of a production worker. While performing the duties of the job, the employee may be exposed to moving mechanical parts, forklift traffic, hot sand, loud noise, chemicals, high temperatures, hot surfaces, molten metal, sharp objects or edges, grinding with wheels and carbides, silica dust and water. We offer a comprehensive benefits package including, but not limited to: Medical, dental, and vision coverage 401(k) plan Weekly pay Paid holiday Vacation Prescription safety glasses Short term disability Life insurance Employee Assistance Program