Quality control inspector jobs in Lafayette, LA - 268 jobs

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Job SummaryInspect raw material and/or parts, audit production practices and processes, and report on non-conformances.Job Description Key Accountabilities: Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions. Segregate non-conforming parts or material. Complete required documentation for work performed. Perform data entry of work results into appropriate databases. Perform final inspection to reconcile outgoing shipments, as required. May be required to identify causes of non-conformance. This is a position that works directly on the warehouse floor on or around heavy machinery. Meet TKMNA Employee Attributes / Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: High school diploma or equivalent Ability to read and write English and perform basic math problems Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) Basic computer knowledge to complete data entry Attention to detail and accuracy Ability to accurately inspect basic material, commodities, and/or processes Safety Mindset. Preferred requirements: Some college courses or certificates in Quality Assurance-related field of study Prior experience using basic measurement instruments Prior experience in a quality assurance inspection position Benefits Overview We offer competitive company benefits to eligible positions, such as : Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) and RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. This position is responsible to ensure equal opportunity in employment in that all persons are treated equally and on the basis of merit, in decisions regarding selection, placement, promotions, training, work assignments, transfers and other personnel actions. City: Lafayette State: Louisiana - The key responsibilities for this position include: Serve as an on-site customer QA/QC representative to ensure quality tools are delivered in a timely manner to support ongoing drilling and completions operations. Operate in and on-call environment with 2 scheduled weekends off per month Quality Assurance & Control: DS-1 , customer, industry, or vendor specification monitoring and enforcement on drilling, completions, handling and specialty tools Actively monitor inspection, assembly, and testing operations Mill Surveillance of drill pipe and casing manufacturing Quality Audits: Quality Management System (QMS) reviews and technical process audits of Rental/Specialty Tool Providers, Inspection Facilities, Machine Shops, and Rig-sites to evaluate conformance to applicable international, industry, internal and customer specific standards Communicate with Project Managers during assignments of job progress and issues Critical thinking and problem solving to ensure a viable solution for our clients Deliverables for all assignments are a detailed report and associated field documents containing findings, actions and relevant technical details of the job - Experience, Skills, and Education Requirements: Demonstrated technical knowledge of the Standard DS-1, relevant API specifications, and other applicable industry standards Demonstrated aptitude to read, interpret, and enforce job associated inspection, assembly, or testing procedures Effectively read, interpret, and utilize drawings and technical schematics to enforce client requirements Demonstrated ability to measure dimensions using calipers, micrometers, and scales, reading to within 1/64th of an inch Perform basic mathematic computations and conversions Effective and grammatically appropriate written and verbal communication skills Ability to efficiently produce detailed technical reports in MS Office Suite Software (Word, Excel) - to include scanning and uploading supporting documents and incorporating photos into report Demonstrated ability to professionally communicate via email and phone with coworkers, vendors, and customers on a daily basis as necessary Intermediate level familiarity with Microsoft Windows / Microsoft Office applications (Word, Excel, Outlook) - to include typing skills and electronic file organization Social and emotional intelligence - proven ability to interact, manage and mitigate conflict with personnel at all levels of industry - Preferred Qualifications: NDT experience (Level II certifications in MP, LP, UT, VT) Oil & Gas industry experience (3 or more years) Experience with assembly, repair, or qualification of Drilling & Completions tools Experience with DS-1 Vol 3 & 4; API 5DP, 5CT, and other API specifications related to drilling and completions equipment Physical Requirements: Ability to sit, walk, climb stairs, or stand for up to 14 hours with limited breaks Ability to hear: audible shop alarms, safety instructions issued verbally by shop safety coordinators or equipment operators, phone calls from project managers, dispatch and other internal and external company employees Ability to see visual defects as small as 1/64” in tools being inspected Ability to carry a tool bag, computer bag and other personal effects to/from worksite (50lb) Ability to travel via automobile or airplane At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. - Here's a breakdown of what we provide: Hourly Rate: $25-28 an hour Annual Incentive Bonus Plan Pay offered may vary depending on job-related knowledge, skills, experience, and market location. Our Health and Welfare Benefits are designed to meet your needs, eligible on your first day of employment: Medical, Dental, and Vision coverage Company-matched Retirement plan Generous Paid Time Off and Company Holidays Life Insurance and AD&D coverage Short-Term Disability (STD) and Long-Term Disability (LTD) Optional life and pet insurance EAP and Total Wellbeing Lifestyle Programs Tuition Assistance and/or Professional Development Employee Discounts This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities. If you are an individual with a disability and you would like us to assist you with searching the Careers Page site for employment opportunities and/or assistance with completing your profile and application, please contact us at ************** or email us with your request to ********************************. We are happy to assist you and encourage you to consider Bureau Veritas for your next great career opportunity! If you would like additional information regarding Bureau Veritas' federal obligations in regards to equal employment opportunity, please click the link below: ******************************************

Desired Skills and Experience Current NACE Level 1, 2 or 3 Certified Coating Inspector required, OCAT Technician is a plus Have a valid TWIC Card and Driver's License Safe Gulf Trained Current METS Water Survival is a plus Familiar with NACE, SSPC and ASTM Standards Current Driver's License Daily Inspection of work site and equipment Ensure contractor is following Client's Coating Specification Taking and recording of ambient conditions Able to read and understand the Clients Coating Specification Observe, document, and report hourly status of contractor Track daily cost of project and clients reporting Ensure job is running in a safe and cost-effective manner Proficient with Microsoft Suite (Word, PPT, Excel, etc.) Great communication skills to give daily updates to client and Management Team Self-motivator Attend weekly phone conferences Able to work at heights Problem-solver Respectful of others and outgoing personality Physical Requirements: Close, color, distance, depth vision, and ability to adjust focus; Helicopter, marine vessel, automobile travel and ability to work outside (including inclement weather); Moving the entire body, considerable use of arms, legs, walking, bending, stooping, twisting, crawling, lifting, balancing, reaching and bending on a regular basis; Able to lift +/-50 lbs. Be able to climb and perform coating inspections at high elevations during inspection of offshore oil and gas facilities and working in confined spaces and on uneven terrain; Able to work off of various scaffolding types including suspension scaffolding and Rigging. Versa offers an excellent total compensation opportunity package, plus competitive benefits that consist of medical, dental, vision, life, & STD/LTD insurance, bonus program, a 401(k) program with company match, paid vacation, paid holidays, EAP and more. Versa is a Drug Free Workplace. The Company's pre-employment screening process includes but is not limited to social security verification, criminal background check, and drug test. MAY be required to pass DOT physical, MVR, and/or credit history based on essential functions of position. Versa Integrity Group, Inc. is proud to be an Equal Opportunity Employer. Applicants are considered for all positions without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, ancestry, marital or veteran's status.

STI provides inspection services of all Downhole Tubular Goods. We provide the highest level of technology, combined with superiorly trained inspectors, to provide our customers with the reassurance that their tools are ready for service. Minimum Requirements: Oilfield experience in Quality Control function - Dimensional Measuring Devices Excellent communication skills with the ability to resolve issues as they arise Knowledge of Microsoft office Knowledge of Inspection and Quality Control methods, techniques and equipment Excellent time-management skills with the ability to work independently with minimum supervision Responsibilities: Sustains quality in correlation with industry standards and customer requirements. Responsible for compilation and maintenance of inspection reports and records. Coordinates and performs internal and external quality audits. Participates in the investigation of faulty work and consult with customers and management team. All other duties as assigned To keep our phone lines clear, once you submit an application, please DO NOT contact the phone numbers on the website. If the Manager at the Hiring Location is interested, they will contact you once your application has been reviewed. An Equal Opportunity Employer Job Type: Full-time View all jobs at this company

TITLE : QC Inspector - AEX REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. Work Location and Schedule This position is based in Alexandria, LA. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Duration: Approximate 6 month project specific position - potential for extension based on project needs (possibility of permanent placement at conclusion of project) Employment Type: Full-time Job Summary The Quality Inspector will be responsible for maintaining Acadian Contractors Inc.'s quality standards across project fabrication operations, including piping, structural, and vessel projects. This role requires a strong technical background, excellent attention to detail, and effective communication skills. The ideal candidate will have a proven track record in fabrication quality control, with a strong understanding of applicable industry codes, standards, and customer specifications. Responsibilities and Duties Attend pre-job and project kick-off meetings as assigned by the Quality Manager Issue and manage Approved-For-Construction (AFC) drawings and revisions to fabrication personnel Interpret and apply job-specific requirements from structural, piping, and vessel drawings Verify materials, dimensions, and tolerances per AFC drawings and job specifications Coordinate Non-Destructive Examination (NDE) activities, including issuing POs and directing third-party inspectors using call-out sheets Conduct 100% dimensional and visual inspections of final fabricated products Monitor welding operations to ensure adherence to Acadian's approved Welding Procedure Specifications (WPS) Spot-inspect layout and fit-ups using calibrated measuring tools (tape, laser, angle finder, etc.) Document all inspection results, including sign-offs on QC drawings and ITP/Traveler forms Confirm welder stencil IDs and ensure accurate heat number documentation on drawings Manage and maintain job-specific Quality Control (QC) data books in accordance with company and customer expectations Perform weld parameter monitoring (voltage, amperage, heat input, gas flow) and update monitoring boards daily Apply "yellow" ribbons to equipment upon QC clearance before shop release Identify, report, and help resolve repetitive quality or workmanship issues with appropriate leadership Flag hold points or work stoppages and authorize release when resolved Foster positive relationships with customers and uphold Acadian's commitment to service excellence Qualifications High School diploma or equivalent preferred. Minimum of 5 years' experience in piping, vessel, and/structural fabrication. Current CWI certification required. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate implementation of proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, best practices, and client-specific site policies. Make a personal commitment and be accountable for HSE results, supporting team members through coaching and mentoring to achieve goals. Accept coaching and demonstrate ownership and improvement of HSE processes based on feedback and ongoing mentorship.

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking an I/E Quality Control Technician for a position in New Iberia, LA. This role plans and coordinates quality control program designed to ensure continuous production of products consistent with established standards. Non-exempt role; Reports to Site QC Manager or QC Supervisor; Performs a variety of routine duties within established policies. This position will build I/E packages that include all drawings, specification sheets for all instruments and electrical equipment, and check-off sheets needed for a complete checkout of the completed module. All Conduit, Cable Tray, Lighting, and associated electrical and instrumentation junction boxes will be inspected before being shipped to the client's location. This Role will require the employee to build packages for both sites. Essential Qualifications: High school or equivalent Minimum three (3) years of experience in all aspects of welding, quality control, and / or inspection Certified Welding Inspector (CWI) preferred Excellent communication, interpersonal, organizational, and problem solving skills Computer Literacy Ability to read isometric diagrams, PIDs, CAD drawings, etc. Interpreting / Understanding 3D modeling Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the Turner Industries Drug, Alcohol and Contraband Policy Comply with company and client job site safety requirements Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Develops an understanding and working knowledge of the company quality control program, company standards, procedures, codes, etc. required to perform assigned work; performs inspections and witnesses tests to determine acceptability of work; performs audits to ensure compliance with QA/QC requirements; defines corrective measures for problem areas and ensures implementation; formulates and maintains quality control objectives and supervises workers engaged in plant functions, such as inspection and testing to ensure continuous quality control over materials and production facilities; develops and analyzes statistical data and specifications to indicate present product standards and establish proposed quality and reliability expectancy of finished product; plans, promotes, and organizes quality and reliability activities; maintains work performance records, inspection records and other related items; assures correctness of all documents; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: quality control, inspection, certified welding inspector, CWI, quality control technician, quality control manager, isometric diagrams, PIDs, CAD drawings, welding, welding inspection, quality control program, quality codes, QA/QC, quality assurance, quality control objectives, production facility, quality activities, reliability activities, inspection records Job Posted by ApplicantPro

Summary of Responsibilities Join the Stratosphere Quality Team! Stratosphere Quality cultivates a positive organizational work environment, where employees are compelled to perform their best. Our team enjoys rewarding and meaningful work in a wide range of manufacturing work environments. Begin a rewarding career today and envision yourself at work with Stratosphere Quality. Rate of Pay:16.00 /hour Quality Inspector Job Summary Quality Inspectors perform various sorting, inspection, production, and data capture. Quality Inspectors work in partnership with our customers to contain and improve quality issues in the most efficient way possible. Stratosphere Quality's vision is to be the Leading Global Provider of Premium Inspection and Quality Assurance Services. We create an atmosphere where we recognize the individual, work together to solve problems, and foster an environment for employee growth. Quality Inspectors work in manufacturing plants, warehouses or other locations where our customers parts are being produced or stored. The location may vary day to day depending on the needs of our customers. Stratosphere Quality teams work collectively to ensure that we are responsive, accountable, and accurate in all aspects of our work. It's important and our people are key to our continued success. Quality Inspector Job Responsibilities & Duties Performs various sorting, inspection, production, and data entry Reads and follows work instructions, work rules and directions Maintains organization and cleanliness of work area Uses inspection, measuring and test equipment as required Completes required training classes Follows all employee policies and other duties as assigned Quality Inspector Job Qualifications & Skills Flexibility and adaptability Positive attitude and self-motivated Detail oriented Top 10 Reasons to work for Stratosphere Quality: Free Training - No Experience Necessary! Vacation Time - Start accruing PTO on Day One Benefits - Medical Benefits, Life Insurance, & 401k Advancement Opportunities - After just 90 days of Employment Referral Program - Earn $200 per referral! SQ Rocs and President's Club - Be rewarded for your hard work Shutdown Savings - Save wages for a rainy day Reimbursement Program - New Equipment On Us! New Tech - Learn and Work with our newest Technology Platforms Travel Opportunities - Customer sites from coast to coast We can recommend jobs specifically for you! Click here to get started.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position Overview:We are seeking a detail-oriented and motivated Quality Inspector to join our shipyard team in support of the construction, integration, and testing of autonomous surface vessels. The Quality Inspector plays a critical role in ensuring that all materials, components, assemblies, and completed vessels meet the highest standards of quality, safety, and regulatory compliance. This position requires flexibility in shift work, a strong eye for detail, and the ability to collaborate closely with engineering, production, and regulatory representatives in a fast-paced shipyard environment.Key Responsibilities Inspection & Testing: Perform in-process and final inspections of welds, hull structures, electrical/electronic systems, outfitting, and finished vessels to verify compliance with drawings, specifications, regulatory/military standards, and customer requirements. Support harbor and sea trials with inspection and verification activities. Documentation: Maintain accurate inspection records, including results, nonconformances, and corrective actions. Prepare inspection reports and provide timely feedback to engineering and production teams. Compliance: Ensure adherence to internal quality standards, ISO 9001, regulatory, and military specific standards. Verify that processes and products comply with all applicable requirements. Problem-Solving: Identify defects, deviations, or nonconformances. Work with cross-functional teams to investigate root causes, recommend corrective/preventive actions, and verify effectiveness of fixes. Continuous Improvement: Actively support quality improvement initiatives, process audits, and implementation of best practices in the shipyard. Provide input on opportunities for inspection efficiency and effectiveness. Collaboration: Partner with engineering, production, and supply chain teams to address quality issues and support on-time delivery of fully compliant autonomous vessels. Interface with regulatory inspectors and customer representatives as required. Training & Support: Assist in training new inspectors and shipyard personnel in inspection procedures, quality standards, and the proper use of inspection tools and documentation systems. Qualifications Minimum 1+ years of experience in quality inspection, preferably in shipbuilding, defense, aerospace, or maritime industries. Experience with autonomous or advanced systems is a plus. Solid understanding of quality control principles, inspection techniques, and measurement methods. Proficiency in using inspection tools and equipment (e.g., calipers, micrometers, gauges, weld inspection tools, electrical test equipment). Familiarity with industry standards and regulations. Experience with ISO 9001, ABS, Navy, and/or Department of Defense quality standards is highly desirable. Strong problem-solving skills with high attention to detail and accuracy. Effective written and verbal communication skills; able to clearly document findings and interact with production and engineering teams. Ability to thrive in a fast-paced shipyard/startup environment with shifting priorities. Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

TITLE: QC Inspector - AEX REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. Work Location and Schedule This position is based in Alexandria, LA. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Special Inspector to join our growing team. The Special Inspector will perform inspections and tests on construction materials and activities in the field to ensure compliance with project specifications, building codes, and relevant industry standards. This position requires strong technical knowledge, excellent communication skills, and a commitment to accuracy and integrity. Essential Functions of the Position Perform field and/or laboratory inspections of construction materials and activities such as reinforced concrete, structural masonry, welding, soils, fireproofing, and structural steel. Prepare and maintain detailed records of inspections, test results, and observations. Interpret project plans, specifications, and codes to ensure compliance. Communicate with project managers, contractors, and engineers to report findings and resolve issues. Maintain certifications and continuing education as required. Minimum Requirements High School Diploma or equivalent; Associates or Bachelor's degree in engineering, construction management, or related field preferred. Minimum 3 years of experience in construction inspection or materials testing. Current certifications in one or more of the following: ICC Special Inspection (e.g., Reinforced Concrete, Structural Masonry, Soils, Steel & Welding) ACI Concrete Field Testing Technician - Grade I AWS Certified Welding Inspector (CWI) NICET certification in construction or geotechnical inspection (preferred) Strong understanding of IBC, ASTM, ACI, AWS, and other applicable codes and standards. Valid driver's license and reliable transportation. Ability to work independently in a field environment and maintain professionalism with clients and coworkers. Preferred Certifications (Not Required, but a Plus): Experience working on commercial, residential, and infrastructure projects. Ability to read and interpret blueprints and construction documents. OSHA 10/30 certification. Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of experience in aircraft maintenance. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Ability to obtain a government flight line driver's license. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. Role overview: To do inspections regarding quality of work that was performed at the site. This is achieved by documenting by visual, hands on or regulatory standarads. Position Responsibilities: Hands on inspection, on the quality of work performed at the site Document any rework that may need to be performed Conduct in-service and final inspection of repair and testing of portable tanks in a production environment Inspect completed preparations of portable tanks for loading Verify all inspections meet or exceed customer and regulatory standards Watch for Safety related issues and report to the Supervisor Direct employees to wear the required PPE Other duties as assigned Qualifications: 2 years working in an industrial setting Knowledge of Tank regulations - Must Have Strong organizational skills Ability to prioritize Possess strong verbal and written communication skills Computer literacy required High School Diploma or GED required LOCATION: Chalmette, LA DCI Benefits: Medical, dental and vision Insurance 401(k) with generous employer match Paid time off, including 10 paid holidays Optional health savings account & flexible spending account Life insurance Employee assistance program Parental leave Referral program Tuition reimbursement

Empower AI is AI for government. Empower AI gives federal agency leaders the tools to elevate the potential of their workforce with a direct path for meaningful transformation. Headquartered in Reston, Va., Empower AI leverages three decades of experience solving complex challenges in Health, Defense, and Civilian missions. Our proven Empower AI Platform provides a practical, sustainable path for clients to achieve transformation that is true to who they are, what they do, how they work, with the resources they have. The result is a government workforce that is exponentially more creative and productive. For more information, visit *************** Empower AI is proud to be recognized as a 2024 Military Friendly Employer by Viqtory, the publisher of G.I. Jobs. This designation reflects the company's commitment to hiring and supporting active-duty and veteran employees. Responsibilities Provide Quality Control (QC) support on a wide variety of IT systems, to include premises wiring; inside plant (ISP) infrastructure, telecommunications rooms/areas and associated infrastructure; and outside cable plant (OSP) infrastructure. This is for Inside and Outside Plant with experience with TIA and ANSI standards. Performing walkthroughs/inspections. Reviewing and validating installation procedures. Maintaining QC checklists and logs. Witnessing IT testing. Witnessing critical aspects (i.e. concrete encasement, mandrelling, etc.) of outside plant construction. Performing checkpoint reviews and filing reports. Attending project briefings. Provides installation and operational support of voice and data communications hardware and software systems. Designs, develops, implements, tests, debugs, and maintains communications systems. Performs configuration of operating system and security patches for host and distributed systems, and implements incident response procedures during incidents of a network or host security breach. Complies with prescribed customer, industry, and agency standards. Qualifications Required: Bachelor's degree in computer science, engineering, or related discipline with 0-5+ years' experience, or Associate's degree in computer science, engineering, or related discipline with 7+ years' experience. SECRET security clearance. Preferred Education and Experience: Up to five (5) years experience in IT installation and testing Experience with optical fiber and copper cable testing. Experience with grounding, bonding, and shielding. Familiarity with ANSI/TIA standards. Familiarity with military IT/construction projects. Physical Requirements: This position requires the ability to perform the below essential functions: Standing for long periods. Ambulate throughout a building. Ambulate between several buildings. Stoop, kneel, crouch, or crawl, as required. About Empower AI All hiring and promotion decisions at Empower AI are based on merit to bring the best talent available to contribute to our firm's overall success. It is the policy of Empower AI not to discriminate against any applicant for employment, or employee because of age, color, sex, disability, national origin, race, religion, or veteran status. Empower AI is a VEVRAA Federal Contractor.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.