Quality control inspector jobs in Loveland, CO - 107 jobs

UXO Quality Control Specialist This identifies the major responsibilities of this position. It does not include all aspects of the position such as potential additional duties requested by supervisors/managers and the requirement for flexibility in helping others for the Company's overall benefit. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. JOB SUMMARY Manage the site quality program under the auspice of the company Quality Assurance Manager. DUTIES AND RESPONSIBILITIES Responsible for implementing and enforcing all quality requirements in the Project Work Plan. Ensure operations produce a quality product while adhering to federal and state regulations. Inspect procedures and policies for compliance to industry standards. Evaluate methods and means for cost effectiveness. Reduce waste, duplicated effort, and product failure. Ensure operations adhere to the project work plan. Conduct workforce training on ordnance. Inspect safety procedures and training programs to maximize time and effectiveness. Conduct stakeholder feedback. Communicate negative trends of production or quality to the project manager. Communicate major deficiencies to the Quality Manager and Project Manager. Coordinate efforts with SUXOS to streamline operations through experience and teamwork. Serves as site liaison to the on-site USACE Safety Representative. MINIMUM QUALIFICATIONS, SKILLS, AND EDUCATIONAL REQUIREMENTS Graduate of a qualified explosive ordnance disposal (EOD) school with at least eight years combined military and commercial UXO experience. As an exception, a UXOSO may be a graduate of a qualified UXO school and have at least eight years commercial UXO experience, as required by DDESB TP18. Current 40-Hour HAZWOPER certification IAW 29 CFR 1910.120 Current 29 CFR 1910.120 HAZWOPER Physical Member of American Society for Quality (ASQ) ASQ Certified Quality Auditor (CQA), preferred, or in training for certification Ability to obtain a Secret Clearance Broad understanding of the Foreign Corrupt Practices Act (FCPA) Ability to work outside normal work hours at short notice as dictated by workload Ability to work away from primary work location in excess of normal workday Ability to travel outside the US Outstanding verbal and written communication skills; ability to interpret and explain company policy concerning MEC safety practices to executives, managers, employees, and clients Intermediate user level of computer systems; Microsoft office software (word, excel, outlook), inventory databases, and documentation control systems Valid Driver License Acknowledgment Selected candidate will be responsible for the satisfactory execution of these duties, responsibilities and functions. Duties and responsibilities may change from time to time without these changes being specified in this and that this job description in no way states or implies that these are the only duties to be performed when filling this position. We are committed to a merit-based hiring process that values individual skills, qualifications, and performance. Our hiring practices comply with all applicable federal, state, and executive orders, including the recent Executive Order on Equal Opportunity Hiring.

Leprino Foods' history dates back over 65 years, when Jim Leprino first started making small batches of mozzarella for local markets and eateries in the Little Italy neighborhood of Denver. We've grown a bit since then. Today, Leprino is the largest manufacturer of mozzarella and lactose in the world, and a leading producer of whey protein. Still owned by Jim and the Leprino family, our sights are set to be the "World's Best Dairy Food and Ingredient Company." To help us achieve that daring vision, we're looking for our secret ingredient: You. A motivated individual who is the best at what you do. Three people in a small corner grocery store in the early 1950s have now grown to over 4,300 employees throughout 16 global locations. Will you join us on our journey? The Greeley Team is seeking a Quality Technician / Team Member II to help us achieve our goals. We Ask of You To: * Be responsible for the safe operation of its associated equipment and/or processes, the quality of incoming raw materials, the quality of the outgoing products in accordance with Standard Operating Procedures (SOP's), Good Manufacturing Practices (GMP) and safe work practices. * Be responsible for maintaining 5S standards and participating in and implementing continuous improvement. * Communicate effectively in relaying information to team members, team leads, supervisors, and managers as applicable. * Have strong time management and organizational skills. * Meet food safety and quality requirements by following the Food Safety Plan, Quality Plan and company policies. We Offer You In Return: At Leprino Foods, starting compensation for this role is $25.00 per hour. * A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries, tuition assistance, vacation, holiday, dedicated sick time, matching 401(k), annual merit increases and bonuses, as well as our annual Profit-Sharing plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. You Must Have (Minimum Qualifications): * Must be 18 years of age * Must be able to read, write and speak the English language in order to understand/adhere to Standard Operating Procedures (SOP's) and Good Manufacturing Practices (GMP's), to communicate effectively with others, to complete required documentation both in written and electronic form, and to troubleshoot systems utilizing the English language. * Must have the ability to perform essential job functions * Must wear required personal protective equipment * Must comply with all applicable safety practices * Maintain a clean work area * Complete written reports * Perform basic and intermediate mathematical calculations * Enter data into and pull data from computer systems * Must possess considerable problem-solving ability in dealing with equipment or troubleshooting when supervision is not readily available for consultation * Must have an understanding of basic chemistry or biology, and basic lab equipment and testing through on the job experience, or through high school or college coursework * Experience in instrumentation operation and troubleshooting in a manufacturing environment, experience with computers and programs We Hope You Also Have (Preferred Qualifications): * Advanced level science knowledge (e.g. chemistry, biology); and lab work experience (e.g. computer-assisted analytical equipment, balances, fat extraction, pH meter, incubators, infrared analyzer (FT2) are preferred. Experience in a manufacturing environment is preferred "The culture of Leprino Foods is built by a family of passionate employees who believe in what they do, who understand the value of teamwork and understand that no one person is greater than the other." - Andy, Greeley, Colorado Plant Manager Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at ******************** Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at ******************** Leprino Foods requires all individuals to wear the appropriate Personal Protection Equipment (PPE) as required by the role and location. Leprino Foods Company supports a drug-free workplace and is an EEO/Affirmative Action Employer - M/F/Disability/Veteran Leprino uses Psychemedics for a 90-day hair follicle drug test as part of the employee pre-employment process and also participates in E-Verify. All employees in our manufacturing facilities are required to wear Personal Protective Equipment (PPE) as mandated by their role and location.

Join our dynamic Quality Assurance team at our Organic Dairy Processing facility in Platteville, CO. Be a part of a 2025 Top Workplace USA! Purpose: The Quality Assurance Lab Technician is responsible for in-process and finished product quality testing, maintaining accurate and complete records, and alerting management to any potential quality issues. Shift Days 6am - 6pm Essential Responsibilities: All plant personnel have the responsibility to monitor and report any deviations from our Food Safety and Food Quality (HACCP & SQF) programs to your immediate supervisor. Assist in all in-bound and finished product milk processing including but not limited to: Customer Service, working with our Laboratory and Product Information Management System, Tanker/Silo Inventory Control, administrative assistant duties. Competency in Microsoft Windows and Office products. Responsible for performing process control testing in a manufacturing environment. Maintain accurate and complete laboratory testing result records. Maintain Good Manufacturing Practices, Good Laboratory Practices and Safety Procedures. Communicate any potential quality issues to QA Management. Professional communication and customer service skills in working with multiple departments and external partners. Other Required Responsibilities: Laboratory testing result data entry. Member of HACCP team. Other quality department responsibilities as deemed necessary. Knowledge & Experience: High School Diploma or equivalent. Bachelor's degree in Dairy Manufacturing, Food Science, Microbiology, or related field preferred. Experience in dairy laboratory testing procedures preferred. Knowledge of laboratory testing methods. Detail oriented and team member. Strong, honest work ethic with ability to handle multiple tasks daily. Good communication skills. Physical Requirements: Must be able to sit for extended periods of time; Must be able to stand or walk for more than 50% of the shift. Must be able to bend, stoop, kneel or crawl; reach grasp and lift, push, pull up to 50 lbs. regularly and up to 80 lbs. occasionally. Day Shift 6am - 6pm

Tendeg LLC is an engineering-driven company that designs and builds high-performance antenna systems and precision structures for space missions. Our work supports communications, sensing, and data delivery in demanding orbital environments, with applications ranging from weather forecasting and Earth science to global connectivity, national security, and scientific exploration. Our hardware is flight-proven, with more than 25 antennas currently on orbit and a portfolio of deployable apertures that spans multiple sizes and frequency regimes. As we scale manufacturing to meet growing demand, we re building a team focused on disciplined execution, technical rigor, and delivering hardware that works. If you re interested in joining a growing team that designs and builds the infrastructure behind modern space missions, we d like to hear from you. Tendeg s Philosophy We encourage innovation and entrepreneurial energy. We are successful because we take a unique approach to solving problems. We look for creative thinkers and self-motivated people that can collaborate within our open team environment. TENDEG is an acronym for TENacious Design and Engineering Group. Obviously, tenacity is another trait we embrace. Title: Quality Inspector Position Type: Full-Time/Non-Exempt Pay Range: $30.00 - $35.10 Hourly (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data) Location: Louisville, CO (Onsite) Position Purpose: As a Quality Inspector II you will be responsible for inspecting electrical wiring harnesses, circuit boards, machine parts and mechanical assemblies used in Tendeg deployable antennas, ground support equipment, test equipment, and/or internal development tools. They work closely with engineers and other technicians to ensure that electrical and mechanical systems function efficiently and reliably, and document non-conformances when they occur. Job Responsibilities: Complies with established job safety practices, policies and procedures as specified in plant and corporate directives for the safe performance of the work assignment. Advises production when inspection results do not meet customer specifications and create non-conformance reports. Performs record keeping duties as required under the direction of the QA Manager. Initiates, reviews, and follows all standard operating procedures (SOPs) for area of responsibility. Conduct detailed inspections of aerospace components, structures, systems, and material certifications according to established standards and procedures. Perform visual and dimensional inspections using precision measuring instruments such as calipers, micrometers, and precision measurement equipment. Verify compliance with engineering drawings, specifications, and technical documents. Document inspection results accurately and thoroughly, including any deviations or non-conformities. Collaborate with engineers, technicians, and other team members to document and resolve quality issues. Participate in the development and improvement of inspection processes and procedures. Maintain a clean and organized work environment and ensure proper handling and storage of inspected components. Adhere to safety protocols and regulations at all times to ensure a safe working environment. Establishes and maintains effective work relationships within the department, the division, the group, and the company. Complies with environmental regulations when using, dispensing, or handling hazardous and non-hazardous materials and wastes. Perform other duties as assigned. Required Skills, Qualifications and Education: 3-6 years of experience High school diploma or equivalent; technical education or certification in aerospace technology, quality control, or a related field is preferred. Experience with GD&T, Zeiss CMM, FaroArm, Leica and Micro vu preferred. IPC-620, IPC-610 and J-STD 001 certifications are preferred but not necessary. Strong attention to detail and excellent observational skills. Proficiency in using precision measuring instruments and basic hand tools. Ability to interpret engineering drawings, specifications, and technical documents. Good communication skills and the ability to work effectively in a team environment. Willingness to learn and adapt to new technologies and inspection techniques. Commitment to maintaining high standards of quality and safety. Benefits: As we are growing and investing in our company, we invest in our team. We recognize employee contributions through competitive salaries and bonuses and take pride in taking care of our employees. Here is how we show our appreciation: Generous Paid Time Off Paid Parental Leave Medical/Dental and Vision Insurance Plans Tax Advantage Account (Flexible Spending Account) (FSA) Retirement Savings Plan-Traditional 401(k) Plan Employer Paid Short Term Disability and Basic Life, AD&D Additional Benefit Options Including Voluntary Life and Long Term Disability Employee Assistance Program (EAP) Company SWAG Dog friendly work environment Free company parking Break rooms fully stocked with snacks, drinks, and an espresso coffee machine "Must be a U.S. Person as defined by 22 CFR 120.62." Tendeg LLC is an Equal Employment Opportunity (EEO) employer. All qualified applicants are considered for employment without regard to race, religion, color, sexual orientation, age, disability, marital status, genetic information, national origin, veteran status and any other protected factor. #LI-TENDEG

Join RK as a Quality Inspector - Where Excellence Meets Opportunity At RK, quality isn't just a standard-it's our promise. As a Quality Inspector, you'll be the cornerstone of that commitment, ensuring every project meets the highest level of precision and craftsmanship. This is your chance to work alongside skilled professionals in both shop and field environments, contributing to diverse, impactful projects that shape industries. Self. Made. at RK At RK, Self. Made. isn't a tagline, it's how work gets done. People here build more than projects; they build capability, confidence, and careers they can be proud of. With so much work designed and fabricated in-house, ideas move quickly from concept to shop floor to job site. Teams collaborate across disciplines, solve real-world challenges, and grow through hands-on work that truly matters. RK Company Overview RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Position Summary The Certified Welding Inspector (CWI) is responsible for ensuring conformance with internal quality standards and external accreditation requirements (ISO 9001, AISC, and ASME). CWIs conduct inspections, support audits, and collaborate with production teams to ensure high-quality fabrication practices. This role plays a key part in maintaining certifications and creating a culture of continuous quality improvement. The role and responsibilities expand with each level of experience and competency. Role Responsibilities * Responsible for assessing corporate conformance to the Quality Management System (QMS), AISC Certification, and ASME Certification * Assist with all inspection and testing services provided by RK * Monitor activities relating to client expectations of the company. * Report QMS progress, activities, and observations to Quality Manager. * Review plans to ensure they meet building codes, local ordinances and zoning regulations * Monitor construction sites/fabrication facilities to ensure overall compliance * Use survey instruments, testing equipment, and other systems to ensure that product meets code and requirements * Verify alignment, level, and elevation of products * Keep daily logs, including photographs taken during inspection * Provide written feedback related to the findings * Other duties as assigned Qualifications * Indirect supervision. * Fully competent in all conventional aspects of subject matter or functional area. * Plans and conducts work requiring judgment in independent evaluation, selection and substantial adaptation/modification of standards. * Devises new solutions to problems encountered. * Independently performs most assignments with instruction * Receives guidance for unusual or complex problems and supervisor approval for changes in standards. * College/university graduate or equivalent combination of skills and experience generally expected for specified technical roles. * CWI Preferred Minimum Physical Requirements and Accountability * Work outside, inside, and in dusty, noisy and hazardous areas. * Work in high places, tight places, confined spaces and/or other adverse locations. * Climb, balance, squat, kneel and crouch. * Work in all types of weather. * Must have working knowledge of all trade materials and tools. * Ability to lift, move, and/or carry 50 lbs. What Sets RK Industries Apart * Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental * Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition * Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards * Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation * Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis

Job DescriptionSalary: $20/hr - $33/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The Quality Inspector performs inspections of product against customer requirements and according to internal procedures while maintaining the timely flow of product and minimizing escapes and other non-conforming materials. Quality Inspector Key Responsibilities and Accountabilities: Perform First Piece, Lot and Final Inspections against customer requirements Conduct in-depth review and able to properly interpret acceptance criteria in accordance with customer purchase order & specifications, including industry standards Command of problem solving techniques such as; 8D, Fish-Bone, 5-why & facilitate Team Based Root Cause Corrective Action(s). Define detailed in-process & final inspection plans Audit in process inspection reports/checklist on the production floor Perform and fill out AS9102 First Article Inspections and Inspection Reports Compile and confirm the accuracy of customer required shipment paperwork Understand and follow internal inspection procedures and maintain inspection records Proper tool selection based on tolerance zones Understand and maintain the ERP system per company policies Keep current with industry inspection techniques, practices and required standards Understand and stay current with industry standard inspection equipment; including calipers, micrometers, bore gauges, height gauges, indicators, etc. and the calibration and maintenance of these instruments Understand and stay current with GD&T standards, terminology and inspection methodologies Be willing to perform other duties as assigned (Calibration, Audits, CAPA, Customer Complaints, RMAs, etc.) At least 3-5 years practical experience in bench inspections and general practices and methodologies Requirements Experience with AS9100 and AS9102 Working knowledge of Special Processes Minimum of 3-5 years practical experience working with bench inspection processes and in-process inspections Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) Strong time management Ability to work independently and meet deadlines Experience working in a manufacturing environment Good verbal and written communication Experience working with MS Excel and Word We offer comprehensive benefits including: Paid Time Off 401(k) with employer match Quarterly Incentive compensation Paid Holidays Medical, dental, vision & life insurance Short- and long-term disability IMPORTANT NOTICE: To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, or lawful permanent resident of the U.S. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Starting compensation: $21.00 per hour (plus a $1.50 shift differential) Shift Days: Sunday to Thursday Shift Hours: 2:30 PM to Close Shamrock anticipates closing the application window for this job opportunity on or before December 31, 2026 Maintains all aspects of Quality Assurance to ensure proper, safe and exceptional operation of the department. Essential Duties: * Audits products for quality and safety prior to sending out to customers. * Audits incoming raw materials for supplier specifications, quality, and food security. * Reviews incoming ingredients for allergen checks and quality standards. * Responsible for compliance with all regulations. Food Safety - plant in proper sanitary condition at all times, including allergen control, pest control, guidelines followed. * Fills out necessary paperwork for product audits and HACCP documents. * Reviews HACCP documents prior to handing paperwork to QA Supervisor/Manager. * Work with operational teams daily with paperwork, quality checks, and HACCP procedures. * Ensure adherence to all standard work processes, including the Production Sanitation processes. * Aides in plant training requirements and training frequencies. Work with QA Supervisor/ Manager to ensure plant training requirements and frequencies are met. Conduct plant training sessions as needed. * Maintain understanding of processes and functional interdependencies. Recognize and escalate, as needed, those issues identified as risks to, or opportunities to improve, plant performance. * Must be able to work within timelines and in pressure situations. * Other duties may be assigned. Qualifications: * High School Diploma or GED preferred * Meat Protein Experience * HACCP certified, preferred Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education, wellness programs. Equal Opportunity Employer Shamrock Foods Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Job Description The job of the Quality Control Technician is to ensure compliance with cGMP requirements and company procedures while providing support to the QC team and throughout the QA and Operations departments. Additionally, this role is responsible for coordinating QC sample preparation and external laboratory shipments in relation to Environmental Monitoring activities and other required sampling. This role will work closely with the Production team and report quality data to department management, as needed. Duties/Responsibilities: Maintain retention materials and disposal when required. Assist with review and release of raw materials, API, excipients, and sterile supplies. Coordination of Biohazard waste destruction. Perform sampling and inspection of in-process and finished products. Assists with Environmental Monitoring and microbiological sample evaluation activities. Coordination of submitting samples for testing with third party vendors on their respective web portals or paper submissions. Logbook and controlled document generation. Assist with investigations and develop and implement corrective and preventive actions geared toward continuous process improvements. Review GMP documents including production environmental monitoring forms, room and equipment logs, etc. Support quality management system activities including document control and training program management. Other duties and tasks, as assigned. Required Skills/Abilities: Excellent independent judgement, written communication, verbal communication, and interpersonal skills. Strong attention to detail. Familiarity with Good Manufacturing Practices and FDA Regulations. Proficient in using Microsoft Word, Excel, PowerPoint, Outlook. Education and Experience: 1-3 Years as a Quality Control Technician Pharmaceutical, Medical Device, or biotechnology industry experience, preferably in support of manufacturing. Associate degree in the sciences or equivalent experience preferred. Physical Requirements: Ability to work in a clean room setting Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times. 7:00 am to 3:30 pm, Monday through Friday

The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities * Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) * Verify part conformance to engineering drawings, tolerances, and work instructions * Read and interpret blueprints, GD&T, and manufacturing specifications * Document inspection results accurately in quality records, travelers, and digital systems * Identify nonconformances * Conduct surface finish, weld quality and dimensional inspections as required * Collaborate with production operators and supervisors to resolve quality issues * Maintain a clean, organized, and safe work environment * Support continuous improvement initiatives Qualifications * Required: * 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing * Ability to read and interpret blueprints * Proficiency with standard inspection tools * Strong attention to detail and accuracy * Ability to work independently on 2nd shift * Basic computer skills for data entry and documentation * Preferred: * Experience with FAIRs & ISO 9001 environments * Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements * Ability to stand for extended periods * Ability to lift up to 40 lbs. * Frequent bending, reaching, and handling of materials

Pay Type: Salary Estimated Wage Range $57,600 - $67,700/Annually Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions are inside the buildings and infrastructure that connect people and advance how we live. And we invite you to come and build with us. As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build _your_ ambition. Learn more at ********************** (****************************************** Description: Join Amrize as a Quality Control Technician II and help construct whats next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! **ABOUT THE ROLE** Collects samples and performs accurate quality control testing to ensure product quality. Provides verbal and/or written test results to management and production staff in a timely manner. Assists manager with customer service issues as directed. Certifies results of laboratory findings. Provides QC support on various residential and commercial projects. **WHAT YOU'LL ACCOMPLISH** + Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. + Ensures that all testing is conducted efficiently and consistently to ensure accurate results. + Prepare required documents with test results to be presented to production personnel and quality control management. + Maintains mix designs as required by DOT or local city/county specifications or to ensure accuracy of products used in mix. + Ensure that safety, compliance and environmental requirements are followed. + Examines laboratory samples to determine their physical properties. Uses a variety of instruments and calculations to determine conformity. Performs various tests to make certain that samples meet required standards. + Records, analyzes, certifies and prepares summaries of findings. Maintains records of test results using various databases. + Provide technical support for production. + Assist in the investigation and testing, and sampling of raw materials and finished products to help solve quality problems. + Demonstrate a commitment to communicating, improving and adhering to health, safety andenvironmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. **WHAT WE'RE LOOKING FOR** **Education:** High school diploma or equivalent **Required Work Experience:** 3-5 year **Required Training/Certifications** : State regulated or industry certifications, as required **Travel Requirements:** 5% **Additional Requirements:** + Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment (PPE), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test **WHAT WE OFFER** + Competitive salary + Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings + Medical, Dental, Disability and Life Insurance + Holistic Health & Well-being programs + Health Savings Accounts (HSAs), Flexible Spending Accounts (FSAs) for health and dependent care + Vision and other Voluntary benefits and discounts + Paid time off & paid holidays + Paid Parental Leave (maternity & paternity) + Educational Assistance Program + Dress for your day Accepting applications through 12/23/25 **Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.** _We thank all applicants for their interest; however, only those selected for an interview will be contacted._ **BUILDING INCLUSIVE WORKSPACES** At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. **Nearest Major Market:** Denver

About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities * Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) * Verify part conformance to engineering drawings, tolerances, and work instructions * Read and interpret blueprints, GD&T, and manufacturing specifications * Document inspection results accurately in quality records, travelers, and digital systems * Identify nonconformances * Conduct surface finish, weld quality and dimensional inspections as required * Collaborate with production operators and supervisors to resolve quality issues * Maintain a clean, organized, and safe work environment * Support continuous improvement initiatives Qualifications * Required: * 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing * Ability to read and interpret blueprints * Proficiency with standard inspection tools * Strong attention to detail and accuracy * Ability to work independently on 2nd shift * Basic computer skills for data entry and documentation * Preferred: * Experience with FAIRs & ISO 9001 environments * Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements * Ability to stand for extended periods * Ability to lift up to 40 lbs. * Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) Verify part conformance to engineering drawings, tolerances, and work instructions Read and interpret blueprints, GD&T, and manufacturing specifications Document inspection results accurately in quality records, travelers, and digital systems Identify nonconformances Conduct surface finish, weld quality and dimensional inspections as required Collaborate with production operators and supervisors to resolve quality issues Maintain a clean, organized, and safe work environment Support continuous improvement initiatives Qualifications Required: 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing Ability to read and interpret blueprints Proficiency with standard inspection tools Strong attention to detail and accuracy Ability to work independently on 2nd shift Basic computer skills for data entry and documentation Preferred: Experience with FAIRs & ISO 9001 environments Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements Ability to stand for extended periods Ability to lift up to 40 lbs. Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Quality Inspector - 2nd Shift Reports to: Quality Manager Department: Quality Wage Range: $19.00 to $24.00 Are you a forward-thinking leader passionate about optimizing supply chain operations? PTA Plastics, an employee-owned and innovative leader in the plastic injection molding, contract manufacturing and tool-building industry, is looking for a Quality Inspector to join our dynamic team. At PTA Plastics, we're more than just a manufacturer; we partner with Fortune 500 OEMs in the medical device, defense, homeland security, and technology sectors, constantly pushing the boundaries of product development and manufacturing excellence. As an employee-owned company, every team member has a stake in our success, creating a collaborative and entrepreneurial environment where innovation thrives. Job Summary: The 2nd Shift Quality Inspector is responsible for ensuring that all plastic products meet the company's quality standards and specifications. This role involves inspecting products at various stages of the manufacturing process, performing tests, and identifying any defects or issues that could affect product performance and safety. The Quality Inspector will work closely with production teams to ensure continuous improvement and compliance with quality regulations. Key Responsibilities: Conduct visual and dimensional inspections of plastic products to ensure they meet quality specifications. Perform tests to check for material strength, durability, and other physical properties. Use measuring tools such as calipers, micrometers, gauges, and other inspection equipment to assess product dimensions and tolerances. Record and maintain detailed inspection reports, including measurements, test results, and any identified defects. Prepare and update quality control checklists and procedures. Maintain accurate and organized records of all inspections and tests performed. Monitor the production process to ensure adherence to quality standards. Identify non-conforming products and initiate corrective actions. Work with production and engineering teams to resolve quality issues and implement process improvements. Ensure compliance with industry standards, safety regulations, and company policies. Collaborate with production teams to provide feedback on quality issues. Participate in meetings to discuss quality control results and improvement strategies. Assist in training production staff on quality standards and inspection procedures. Suggest and implement improvements to inspection processes to enhance product quality and efficiency. Stay up to date with industry developments, new inspection techniques, and technological advancements. What We're Looking For: High school diploma or equivalent; associate degree or certification in quality control, engineering, or a related field is preferred. Proven experience as a quality inspector in a plastics manufacturing environment. Familiarity with quality control standards (e.g., ISO 9001). Strong knowledge of inspection equipment and measuring tools. Ability to read and interpret technical drawings, blueprints, and specifications. Excellent attention to detail and problem-solving skills. Good communication skills and the ability to work well in a team. Ability to work in a fast-paced environment and handle multiple tasks. Physical Requirements: Ability to stand for long periods and perform repetitive tasks. Comfortable working in various environmental conditions, including noise, heat, cold, and exposure to chemicals. Ability to work in a fast-paced environment and adapt to changing priorities. Comfortable wearing personal protective equipment (PPE) such as safety glasses, gloves, and ear protection when on the manufacturing floor. Ability to work in temperature-controlled environments and withstand exposure to noise levels associated with manufacturing machinery. Ability to receive, comprehend and utilize required training from OSHA and Company including but not limited to the following: Hazard Communication, Lock Out/Tag Out, First Aid and CPR (optional) AAP Statement: PTA Plastics is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

JOB TITLE: Quality Control Technician DEPARTMENT: Quality Assurance DIRECT SUPERVISOR: Director of QA GENERAL JOB DESCRIPTION: Scheduled hours for this position can vary depending on the needs of the company at the time. Shifts will generally be scheduled for four 10 hour shifts, from 1:00 - 11:30 pm Tuesday and Wednesday, and 4:00 am - 1:30 pm Saturday and Sunday. MAJOR DUTIES AND RESPONSIBILITIES: Responsible for carrying out policies and procedures as implemented by EB including GMPs, food safety, and quality to always keep facility “audit ready” Report violations to Production Lead or Supervisor, if repeat violations occur report to QA & Production Managers. Responsible for verifying policy, procedure and standard compliance through monitoring and documentation This includes but is not limited to Net Weight, Metal Detection, QC Checks, Retention Sample Log, Hold Log, Label Verifications & Misc. Paperwork that may be needed. Responsible for implementing corrective actions for non-compliance to policy and procedure and standards variance. Pulls retention samples and stores them in appropriate places with appropriate information logged. Inspects equipment at the beginning of production day & throughout the day for cleanliness and safe use. Other projects as assigned. Reports any food safety or quality issues immediately to Management. MINOR DUTIES: Places out of spec items on hold as needed. Identifies quality and food safety issues. Performs GMP training to new hires & refresher training as needed. QUALIFICATIONS: Food manufacturing experience preferred Able to stand for 4 hours at a time Attention to detail Comfortable correcting peers Outlook, Word and Excel preferred Bilingual (English and Spanish) preferred but not required RESPONSIBLE FOR FOOD SAFETY: Yes Pay Rate: $21.00 - $23.50 DOE WORK SETTING: In-person ABILITY TO COMMUTE/RELOCATE: Thornton, CO 80023: Reliably commute or planning to relocate before starting work (Required) WORK LOCATION: ONE LOCATION

Duties and Responsibilities: Work effectively with the Quality, Operations, and R&D departments to perform all work accurately, with a sense of urgency and a positive attitude. Activities include the following: In-Process and Final Device Inspection and Test : Support Manufacturing as the QC inspector for clean-room & packaging inspection activities. Perform and document in-process and final inspection/test of devices and sub-assemblies. Provide inspection/test assistance to R&D, Operations and Quality Engineering in support of design and process verification/validation activities. Receiving Inspection and Test : Perform and document receiving inspection/test of device components & raw materials in accordance with drawings/specifications. Maintain accurate & timely records of inspection activities and recording such activities in the QC Receiving Log. Non-Conforming Materials : Identify, segregate and quarantine non-conforming materials resulting from inspection activities. Initiate NCRs and notify the workstream owner in a timely manner. Execute and record disposition activities in accordance with approved NCRs. Microbiological Monitoring : Participates in periodic microbiological and particulate testing of the cleanroom and products as required. Returned Goods Authorization : Perform timely inspections and maintain accurate records of all returned TriSalus products through the RGA process. Correctly dispositions returned product as defined in approved procedures. Quality Record maintenance : Receive, verify, scan and physically file Quality Records in an organized manner as needed. Shipping QC : Verify TriSalus products and associated paperwork are accurate and complete prior to shipment. Audit Assistance : Help retrieve, review, organize and re-file documentation during all TriSalus site audit activities (internal, FDA, ISO registrar). GP Dynamics : Transfer released materials in the ERP software for material management as needed. Training Record support : Enter complete training/certification records into the eQMS as needed. General : Perform other quality inspection, test or administration activities as assigned. Qualifications Education & Certifications: High School diploma. Advanced education or certifications a plus. Work Experience: 2+ years of Quality Control / Inspection experience in a medical device or similar technical product manufacturing company. Experience working with sterile disposable products in a cleanroom environment a plus. Knowledge, Skills & Abilities: Able to read and interpret engineering drawings, specifications and detailed technical documents. Able to read and follow quality procedures and detailed work instructions (QLPs/OPs). Able to perform component and product inspection/testing using tools such as microscopes, calipers, micrometers, pin gauges, depth gauges, pull force test systems and vision measuring systems. (Sufficient knowledge to select and use the correct measurement tool for the required inspection accuracy. Able to accurately document results of inspections using good documentation practices. Able to understand and apply inspection sampling plans, such as C=0 or ANSI Z1.4. Able to utilize basic math skills. Able to use MS Word and MS Excel. Must possess strong attention to detail. Possess good communication skills and able to interact with peers in a professional manner. Possess knowledge and application of US and international standards for quality management (FDA 21 CFR 820, ISO 13485). Demonstrates excellent critical thinking skills. Ability to adapt to and rapidly learn new processes. Strong verbal and written communication skills and confidence in making inspection related decisions. Participates as a member of cross functional technical teams to support process improvements, special projects and investigations as needed. Approaches work tasks with a positive attitude and seeks feedback on performance to continually improve. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Must be able to lift and carry up to 30 lbs. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards.

The Quality Control Technician at our 503B outsourcing facility is responsible for ensuring that all products meet the highest standards of quality and safety before they reach our clients. This role involves performing various tests and inspections on raw materials, in-process samples, and finished products, and environmental monitoring in cleanroom environments. The Quality Control Technician will work closely with production, quality assurance, and other teams to identify and resolve any quality issues, maintain accurate documentation, and support continuous improvement initiatives. This position requires a strong understanding of Good Manufacturing Practices (GMP), FDA regulations, and 503B guidelines, along with excellent attention to detail and analytical skills. RESPONSIBILITIES Conduct routine testing and inspection of raw materials, in-process samples, and finished products to ensure compliance with established quality standards and specifications. Perform environmental monitoring, including sampling of air, surfaces, and personnel in cleanroom environments, ensuring adherence to GMP regulations. Maintain accurate and detailed records of all quality control activities, including test results, deviations, and corrective actions. Collaborate with production and quality assurance teams to investigate and resolve any quality issues or non-conformances. Operate and maintain laboratory equipment, ensuring proper calibration and function according to standard operating procedures (SOPs). Participate in the validation and qualification of new equipment, processes, and methods to ensure consistent quality and reliability. Assist in the development and revision of SOPs, work instructions, and other quality-related documents. Ensure timely and accurate completion of all required documentation and reports, maintaining compliance with FDA regulations and 503B guidelines. Support internal and external audits by providing necessary documentation and responding to audit findings in a timely manner. Stay current with industry trends, regulatory updates, and best practices related to quality control and 503B outsourcing facilities. Assist in the training and mentoring of new quality control staff, ensuring adherence to company policies and procedures. Work closely with the Quality Assurance team to implement and monitor quality improvement initiatives. Conduct stability testing and data analysis to ensure product integrity over specified shelf life. PHYSICAL REQUIREMENTS Must possess 20/20 vision (with or without correction) and be able to pass vision and colorblindness test

The Quality Technician II is responsible for maintaining the Quality Management System by following the required procedures and ensuring customer requirements are identified and met. Essential Duties & Responsibilities Reads part drawings and assesses dimensions. Supports inspection equipment operation within the production cell as required, including Coordinate Measurement Machine. Initiates Management Review Board and performs actions as assigned. Performs Final Inspection - Ensures required documentation from all inspections are complete and all functions of the manufacturing process have been verified as complete. Ensures correct product identification and traceability of materials is maintained throughout the operations process. Initiates Quality-related turnbacks and communicates with production. Creates basic and intermediate certifications as required by the Work Order, including FAIRs. Performs specialised inspection, including visual and dimensional checks. Assists with Internal Auditing as required. Assists with measurement tool calibration as required. Creates basic CMM programs in the production cell to aid in inspection. Participates in small projects or other tasks as required. Education and Experience This position requires a High School Diploma or GED equivalent. This position should have 2-3 years of experience in a quality role in a manufacturing environment. Experience with QMS compliance software (e.g., Qualtrax) and enterprise resource planning system (e.g., JD Edwards or SAP) is required. Knowledge, Skills, and Abilities Must have the ability to multitask in a fast-paced environment. Excellent interpersonal skills and ability to effectively communicate with all levels of the organization both written and verbal in English. Ability to work in a team environment. Must have a high level of attention to detail and excellent problem-solving skills. Must be proficient with Microsoft Office, specifically Excel and Outlook, and general computer skills. High knowledge of materials and material requirements as they relate to customer orders. High knowledge of purchase order requirements. Ability to read blueprints and product drawings and interpret requirements as needed. Must be able to operate various inspection tools such as dial calipers, micrometers, optical comparator, height gages, pin & plug gages, pi tape and microscopes. Must have excellent math aptitude. Work Environment/Physical Demands/Equipment Used This position is located in a manufacturing facility which requires prolonged sitting, standing, walking, squatting, twisting, and bending. This position will spend about 90% of their time on the production floor where heavy machinery is present and loud sounds exist. Requires manual dexterity for typing and considerable time at a computer. Health and Safety - PPE Requirements Safety Glasses to be worn at all times when on the production floor Safety Shoes to be worn at all times when on the production floor Must wear appropriate PPE for all work activities performed; varies based work

Job DescriptionDescription: ROLE AND RESPONSIBILITIES • Inspect mechanical parts fabricated internally using industry standard inspection tools • Inspect mechanical parts and components provided externally by suppliers at inspection stations. • Inspect and monitor incoming raw materials/packaging and finished goods, including paint, for specification compliance • Inspect electrical wire routing, torquing and continuity as required • Conduct electrical testing of product as required • Assist in troubleshooting non-compliant inspected parts and components • Responsible for inspection related document control and records storage • Document and record inspection results in electronic and hardcopy format • Interpret mechanical drawing dimensional features and acceptable tolerances • Maintain a “floor presence” as an “auditor of quality” throughout the manufacturing facility and process • Regularly review work instructions, travelers, and production records for continuous compliance to manufacturing requirements • Works closely with production managers and manufacturing personnel conducting quality assurance checks • Participates in regular procedure training activities in production • Provides support for quality related projects, objectives and deadlines beyond the normal job scope as required • Makes key decisions concerning product quality on their own, including pausing the line when processes do not conform to specification • Facilitates GEMBA Walks, Quality Stand-up meetings, and other public speaking activities as needed • Compiles and distributes weekly quality metrics data at the direction of the Dir of Quality QUALIFICATIONS AND EDUCATION REQUIREMENTS • A minimum of 3 years' experience as a Quality Inspector in an ISO 9001 environment is required for this position • A minimum of 3 years' electrical/electronic manufacturing experience is required • ASQ CQT certification or current pursuit of certification is highly desired • A 2-year technical or vocational certificate is highly desired • Advanced working knowledge of ISO 9001:2015 is highly desired • Knowledge of AQL acceptance sampling plans using ANSI Z1.4 is strongly desired • Knowledge of 5S +1 principles highly desired PREFERRED SKILLS • Advanced hands-on experience using common inspection tools and instruments • Highly proficiency in MS Office Suite (e.g., Excel) • Highschool math skills required • Experience inspecting SS and CRS weld joints is highly desirable • Ability to manage multiple concurrent tasks is required • Deliver results accurately and on time while utilizing a strong learning mindset • Must be capable of working independently to achieve production schedules and quality goals • Effective interpersonal skills involving the ability to work effectively, cross-functionally and cross-culturally • Excellent communication skills adaptable to all levels of the organization • Ability to communicate clearly in a proactive positive sense BENEFITS • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance PERFORMANCE BONUS - Eligible A written and / or practical skills assessment will be required of the successful applicant. Requirements: