Quality control inspector jobs in Mission Viejo, CA

With a legacy spanning over 35 years, Harris Spice has been a trusted partner and leading supplier of high-quality spices, herbs, and innovative seasoning blends. With international facilities and a global supply chain, we proudly serve multiple channels of trade-including industrial bulk, food service, and retail. Our commitment to excellence, quality and consistency has earned us the trust of some of the nation's largest and most recognized brands. As Harris Spice continues to grow, we are dedicated to cultivating a dynamic, inclusive workplace where innovation thrives. We're looking for diverse, talented individuals who are ready to grow with us and help strengthen a brand known for trust, quality, and bold flavor solutions. Position Overview/Job Summary: We are looking for a 1st shift (4:30am-1:00pm) Quality Control Technician to join our team. The Quality Control Technician is responsible to ensure food safety and quality of plant through enforcement of HACCP, and Good Manufacturing Practices (GMPs) are followed by all personnel and to confirm each product meets specifications and quality parameters. Essential Job Functions: Performing pre-operational inspections at beginning of shift or production line changeovers to achieve on-time start-up and first-time quality. Collect raw material samples upon receipt and report any discrepancies to Quality Manager. Verify correct raw materials and packaging are being picked, staged, and used in production. Determine the acceptability of products using visual inspections, sampling, and testing protocols (when necessary). Perform detail-oriented tasks to support production such as checking legible lot codes, “best by” dates, container seals, handling production line rejects, etc. Enforce good manufacturing practice Provide support to the production department to minimize downtime and run efficiently. Maintain orderly paperwork and verify accurate documentation among production, quality, sanitation, maintenance, warehouse, and R&D departments. Organize production and quality records by following established protocol. Perform, log, and verify metal detector checks and provide training to production coworkers. Escalate issues of non-conforming products in a timely manner to management and segregate or place on hold. Interact and support cross-functional department personnel and adapt to change in a fast-paced environment. Ability to work with minimum supervision. Follow and enforce personal safety procedures and escalate to management. Other duties as assigned. This position has no direct reports but may assist in training coworkers and/or covering absences. This describes just some of the main duties, activities and responsibilities for the role which may change at any time with or without prior notice. Skills/Qualifications: 1-2 years of experience in a quality or lab role, preferably within a food manufacturing environment. Knowledge of sanitary food lab techniques and equipment. Able to read Standard Operating Procedures and follow instructions. Able to interpret product specifications. Good communication skills Understand and apply company and customer quality standards. Comfortable working with Microsoft Office and other production or lab information systems as needed. English fluency required, bilingual Spanish a plus. Physical Requirements: Ability to stand in a lab environment, ability to lift 55lbs, and handle food samples in a sanitary manner Sit, use hands & arms, twist, bend, push or pull Walking, standing, stooping, bending, kneeling, pulling, pushing, twisting, climb etc. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Harris Spice reserves the right to revise or change job duties and responsibilities as the need arises. Equal Employment Opportunity Statement Harris Spice is a certified Minority-owned business. Our business is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.

QUALITY CONTROL Cutting Edge Supply Company is North America's Largest Independently Owned Distributor of Ground Engaging Tools.” In operation since 1950; we have been a leader in the Heavy Equipment parts business for over 75 years. Our focus is to provide the highest quality and largest selection of wear parts for the Mining, Construction, and Material Processing. Description The quality control inspector performs assessment, documentation and organization tasks to support the efficiency and effectiveness of their organizations supply chain. Their duties and responsibilities include, but not limited to the following: Position Qualification and Physical Requirements Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality Experience inspection both large & small, fabricated assemblies Experience with calipers, micrometers and other inspection tools Position requires accurate use of a tape measure Drive and operate a forklift Must have experience handling big loads such as rebar, I Beams, or heavy material Ensure that production line adheres to standards and procedures Review blueprints and specifications to compare to produced goods Record inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database Train production team on quality control measures to improve product excellence Propose improvements in the production process Monitor the use of equipment to ensure it is safe and discard or red tag any equipment that do not meet requirements Keep measurement equipment operating accurately by following calibration requirements and scheduling repairs as needed Must be able to lift up to 70/lbs. and use lifting devices Must be able to communicate questions, issues, and discrepancies to supervision. Sufficient math skills to be able to add and subtract dimensions and perform basic shop math. Experience in heavy equipment industry a PLUS Must be a team player Pay Scale: Based on Ability and Experience. We offer 100% paid HMO employee insurance with PPO options available for a shared cost, dental, vision, life insurance, paid time off, 401(k) retirement savings plan that matches .50 cents on the dollar, and 5% profit sharing! Come work with us! Please, No Agencies Please, No phone calls

Quality Manger LIGHT Helmets (Safer Sports, Inc.) Carlsbad, CA (with occasional travel to supplier) LIGHT Helmets is a cutting-edge football helmet manufacturer located in Carlsbad. We are hiring immediately for a Production Manager for our assembly operations. We are a high growth company that offers career advancement opportunities. LIGHT is looking for a HIGHLY MOTIVATED, FOCUSED individual to be part of our fun sports-oriented team. The ideal candidate must have excellent multi-tasking skills and perform a wide variety of duties including: · Required Experience Minimum 2 years of experience managing Quality Assurance/Quality Control (QA/QC) ISO 9001 certification preferred Key Responsibilities o Quality Oversight Manage all quality-related aspects of our products Oversee lot acceptance and inventory management Develop inspection standard operating procedures (SOPs) and acceptance criteria Monitor and ensure paint quality standards o Vendor and Product Compliance Manage vendor quality control procedures Ensure product compliance with internal and external standards o Quality System Management Oversee internal quality systems Maintain and update the quality management system to ensure compliance with the SEI Program Manual Lead SEI audit preparations and communications with the auditor o Product Testing Coordinate NOCSAE testing (initial and annual) Schedule testing and collaborate with production to build helmets for quality testing Manage in-house lab testing of products Perform routine maintenance and calibration of lab equipment Train lab technicians on helmet and component testing procedures Archive and manage testing data o Training and Documentation Train staff on quality inspection protocols Ensure ongoing compliance through regular training Handle documentation and reporting related to quality processes Compensation Base Salary $78,500-98,500 Employee Stock Ownership plan after 12 months of contiguous employment Target Bonus 5-10% of base tied to predetermined KPIs related to defect, costs, etc.

Job Posting Start Date 12-12-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Production Manager, Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Nikkiso ACD is an engineering and manufacturing company specializing in machinery designed to operate at cryogenic temperatures as low as - 420 degrees Fahrenheit, the boiling point of Liquid hydrogen. For over 50 years, Nikkiso ACD has specialized in centrifugal and reciprocating pumps as well as turbines for air separation. Nikkiso ACD has the most diversified product line in the industry covering nearly every application requiring pumps or turboexpanders. This position is based at Nikkiso ACD located in Santa Ana, CA. Job Overview The Quality Control Inspector is responsible for ensuring that all incoming materials are received accurately and routed to the appropriate departments. This position involves verifying that materials match orders, inspecting for defects or damages, and maintaining the organization of the workspace. You will play a key role in maintaining quality and ensuring that our operations run smoothly. Responsibilities Ensure all products are properly packaged, labeled, and lot controlled. Verify products against purchase orders or packing slips for accuracy. Performs visual, dimensional, and functional inspection and testing according to documented policies and procedures. Maintain ISO standards of the products and ensure that there is proper handling of inspection tools. Maintain the QA incoming and first article database. Records inspection and test data as prescribed by written instructions and procedures. Operates all associated test and measurement equipment as instructed and as documented in procedures. Develop and maintain company inspection reports through the manufacturing process. Receive inventory records, process of receiving inspection documents and all other applicable documentation in coordination with the QA department. Reporting quality anomalies to the supervisor. Manage non-conforming components, ensuring relevant departments are informed and assisting in final resolution. Read and interpret manufacturing drawings. Prepare non-conformance reports, as necessary. May prepare and submit change requests. Documents non-conformances in Non-Conforming Material Review system. May train other Inspectors. Assists in gathering, analyzing, and trending of data. Require to keep accurate records to ensure ISO compliance and to be prepare for regular ISO audits. Other Duties: Performs work of a miscellaneous nature as required. Qualifications High school diploma or GED. Some college preferred. Minimum of 5 years' experience as an Inspection or quality technician/specialist in machine shop, foundry, or sheet metal shop. Experience in use of precision tooling/measuring devices. (Calipers, micrometers, welding gases, torque wrench, scale, measuring tape, jigs, multimeter, etc.) High-level of visual awareness and attention to detail. Advanced organizational and multitasking skills. Experience drafting reports and collating data. Ability to work alone with minimal supervision. Ability to analyze and interpret technical drawings and weld symbols. Microsoft Office 360 (Word, Excel, Outlook) Knowledge, Skills, and Abilities Good vision and hearing. Basic understanding of metrology and arithmetic. Familiarity with ERP/ MRP operating systems. Physical Demands Ability to lift, carry, push, and pull up to 50 pounds unassisted; heavier loads require assistance or a lifting device. Ability to remain on feet for prolonged periods and move around the facility without limitations. Ability to sit and work at a station for extended periods without limitations. Capable of completing tasks that involve repetitive use of hands and other body parts. Safety Expectations Maintain a clean and organized work area. Actively participate in safety improvement activities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Environmental Safety Requirements New Employee Safety Training is required by all newly hired employees, including Safety Awareness. All safety-related training is provided and tracked by the EHS Director. Job specific training modules deemed necessary by the employee's Manager or Director will be required of all employees on an ongoing basis. Understanding and ability to safely work in a potentially explosive environment. Employees are required to wear Nikkiso provided PPE as/when needed. PPEs include safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats, and dust masks. Failure to comply with Nikkiso safety requirements will result in disciplinary actions, up to and including termination. In compliance with the Americans with Disabilities Act of 1990, the employer will provide reasonable accommodations to meet the work environmental and physical demands listed above. Salary Range: $55,000/yr. - $65,000/yr. EEOC Statement Equal Opportunity Employer/Veterans/Disabled Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

GLAUKOS - QUALITY CONTROL INSPECTOR I - 1st SHIFT (SAN CLEMENTE, CA) How will you make an impact? The Quality Control Inspector I will be responsible for all aspects of inspection (receiving, in-process and final). In addition, this position will provide QSR support for other QA activities such as calibration, environmental monitoring, product testing, label control, etc. What will you do? Receiving Inspection Receiving inspection of components following procedures, specifications and drawings. Utilize a variety of standard metrology equipment, including: Optical comparator, height gauge, master height gauge, CMM, Vision Metrology System (VMS, e.g., Smartscope), calipers, micrometers, surface table, gauge blocks, pin gauges, dial indicators, durometer, measuring microscope, hardness testers, pull force testers, surface roughness testers, etc. Read engineering drawings and interpret geometric dimensioning and tolerancing. Review associated paperwork, complete inspection records using good documentation practices, and release components. Program the Smartscope to run automatic routines for multiple part inspections. (Level 2 and higher) Write clear and concise procedures for inspection of components, machined tubing, etc. (Level 2 and higher) Carefully handle and process extremely small components without damaging them. In-Process Inspection Perform Line Clearance for Operations activities Inspect and release labeling Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform inspections on components and assemblies in manufacturing Final Inspection Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform final inspection on finished goods Inspect finished goods for proper labels, packaging, tamper seals and product in accordance with procedures. Coordinate final inspection activities with outside vendors, i,e, LAL, peel testing Perform in-house peel testing on sealed packages Maintain sample retain area Other Duties Work with engineering in the design of high quality inspection / metrology fixtures. Support equipment and process validation activities by inspecting process outputs Conduct periodic compliance audits of manufacturing operations and procedures for cGMP compliance. Ensures on a daily basis quality records and company practices are compliant with internal procedures and regulations. Coordinate the monthly environmental monitoring of the cleanrooms. Coordinate quarterly dose audits. How will you get here? High School Diploma required. 0-2 years industry experience. Knowledge, Skills, and Abilities Medical device experience and working knowledge of QSR a must Experience working in a clean room and/or performing in-process assembly and manufacturing verification inspections desirable Attention to detail and accuracy a must Must have excellent documentation skills Team player, good written/oral communicator Must be organized and able to coordinate activities with outside vendors #GKOSUS

Job Details Irvine, CA Full Time High School $25.00 - $25.00 HourlyDescription Job Title: Inspector, Quality Control Supervisor/Manager Title: Staff Engineer, Quality (Production Support) Job Description Summary: Responsible for supporting the Quality department with quality control activities related to the manufacture of the THV within the Leeds and Irvine production facilities. To include in-process and final inspection, labelling/packaging, documentation, and environmental monitoring. The role holder will also provide routine reports and communications to provide timely updates on inspection status. Job Responsibilities: Conduct routine testing on THV, to include functional, visual, and final inspection processes, along with supporting sterilization preparation. Perform Microbiological monitoring on ViVitro (Leeds) or BDC (Irvine) when required. Conduct Preventative Maintenance and calibration of the ViVitro (Leeds) or BDC (Irvine) equipment. Conduct audits on the in-process paperwork associated with the manufacturing process including, but not limited to: manufactured valve DHRs, Jasmine preparation and ancillary logs. Provide support to the Engineering staff by gathering data on clinical product to allow decisions to be made on functionality. Adhere to Quality System and record retention requirements. Comply with all site Health & Safety requirements. Contribute to continuous improvement efforts related to valve manufacture and inspection processes. Inspect final packaging labels and confirm they are applied correctly per the relevant standards and Work Instructions. Support other areas of the business as necessary and applicable to the role. Qualifications Required Education and Experience: A-Levels, or equivalent and substantial relevant practical experience, in science related subjects are required. Bachelor's degree in a division of Biology, Chemistry or a Biomedical related discipline is desired (Leeds). Minimum of 3-5 years' experience in Quality within the medical devices or pharmaceutical industries is desirable. Must be familiar with 21CFR820 and ISO 13485 requirements. Hands on experience with these requirements is preferred. Experience assessing products for compliance and final release is desirable. Skills and Abilities Required for This Job: Must be able to work effectively and collaborate within cross-functional teams. Must possess the ability to handle multiple tasks, with high attention to detail. Ability to file and organize records in a compliant, easily retrievable manner. Must be able to effectively articulate (verbally and in writing) results and conclusions. Must have good documentation skills. Must be able to take initiative and work autonomously with the ability to prioritize a workload.

Under Quality supervision, evaluates materials and products to ensure conformance to drawing requirements, procurement specifications and approved procedures. Evaluations include dimensional, functional, cosmetic and documentation as required per applicable inspection plan. Essential Duties and Responsibilities * Perform Quality Control inspections, as required per ATEC procedures * Read, understand, and interpret engineering (blueprint) drawings and associated GD&T (Geometric Dimension & Tolerances) * Perform mechanical, visual and functional inspection. Utilization of Micro-Vu or similar lighting inspection systems preferred * Engage with respective department members to maintain best inspection practices, foster a cooperative work environment, propose improvements when inefficiencies are observed * Generate, complete, and maintain quality documentation such as inspection records, non-conformance reports, deviation, and scrap forms * Process non-conforming materials following established procedures, able to identify and segregate non-conforming materials, transact as required in the company ERP (SAP) * Perform transactions in ERP system, as necessary to release product from Inspection * Read and conform to all company policies and procedures * Perform documentation evaluations * Interface with other departments including, Purchasing, Shipping, Receiving, Manufacturing, and Engineering as well as Supplier representatives * Assist auditors during internal audits * Other duties as assigned

"At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are core values. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us." JOB SUMMARY To interpret engineering data such as drawings and specifications and inspect in accordance with the data. Must be able to use standard measuring equipment such as calipers, micrometers, height gages, dial indicators etc. Perform visual and dimensional inspections for receiving, in process, final and first article inspections on aviation parts from details to top assemblies. Must be able to understand visual and cosmetic standards. Must have the ability to clearly write nonconformance reports and assist in corrective actions investigations. SUMMARY OF JOB DUTIES Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions * Interpret engineering data such as drawings and specifications * Competent in using measuring equipment such as calipers, micrometers, height gages, indicators. * Perform visual and dimensional inspection * Perform receiving, in-process, final, and first article inspections * Perform inspections to visual and cosmetic standards * Able to write inspection reports and nonconformance reports * Able to understand root cause and participate in corrective actions * Perform review of supplier certifications for conformance to requirements * Data collection for statistical analysis * Must understand and be able to interpret tolerances * Understand application and use of all types of precision measuring instruments used in mechanical inspection, including interpretations of geometrical and positional tolerance requirements. * Travel as required to support suppliers or source/auditing inspection program. GENERAL QUALIFICATIONS - Education, Knowledge, and Experience Education: * A High School Diploma is required. * A two-year college (Associate degree) or ASQ Certification is desired. Experience: * Position may be filled with both entry level and experienced candidates. Skills: Preferred Skills/Experience: Other: * Extended or irregular hours may be required. * Must be authorized to work in the United States. * Boeing EnCore is an "at-will" employer; employment is at the mutual consent of both the employee and the employer, and may be terminated at will for any reason, with or without cause, at any time during employment with the Company. * As business conditions warrant a change in the operating necessities of the Company, all employees are expected to react productively, handle other essential tasks assigned now or in the future. * Tasks may vary slightly based on products produced at a division.

GLAUKOS - QUALITY CONTROL INSPECTOR I - 1st SHIFT (SAN CLEMENTE, CA) How will you make an impact? The Quality Control Inspector I will be responsible for all aspects of inspection (receiving, in-process and final). In addition, this position will provide QSR support for other QA activities such as calibration, environmental monitoring, product testing, label control, etc. What will you do? Receiving Inspection Receiving inspection of components following procedures, specifications and drawings. Utilize a variety of standard metrology equipment, including: Optical comparator, height gauge, master height gauge, CMM, Vision Metrology System (VMS, e.g., Smartscope), calipers, micrometers, surface table, gauge blocks, pin gauges, dial indicators, durometer, measuring microscope, hardness testers, pull force testers, surface roughness testers, etc. Read engineering drawings and interpret geometric dimensioning and tolerancing. Review associated paperwork, complete inspection records using good documentation practices, and release components. Program the Smartscope to run automatic routines for multiple part inspections. (Level 2 and higher) Write clear and concise procedures for inspection of components, machined tubing, etc. (Level 2 and higher) Carefully handle and process extremely small components without damaging them. In-Process Inspection Perform Line Clearance for Operations activities Inspect and release labeling Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform inspections on components and assemblies in manufacturing Final Inspection Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform final inspection on finished goods Inspect finished goods for proper labels, packaging, tamper seals and product in accordance with procedures. Coordinate final inspection activities with outside vendors, i,e, LAL, peel testing Perform in-house peel testing on sealed packages Maintain sample retain area Other Duties Work with engineering in the design of high quality inspection / metrology fixtures. Support equipment and process validation activities by inspecting process outputs Conduct periodic compliance audits of manufacturing operations and procedures for cGMP compliance. Ensures on a daily basis quality records and company practices are compliant with internal procedures and regulations. Coordinate the monthly environmental monitoring of the cleanrooms. Coordinate quarterly dose audits. How will you get here? High School Diploma required. 0-2 years industry experience. Knowledge, Skills, and Abilities Medical device experience and working knowledge of QSR a must Experience working in a clean room and/or performing in-process assembly and manufacturing verification inspections desirable Attention to detail and accuracy a must Must have excellent documentation skills Team player, good written/oral communicator Must be organized and able to coordinate activities with outside vendors #GKOSUS

Job DescriptionBenefits: Dental insurance Health insurance Paid time off Profit sharing Vision insurance D.W. Mack Co., Inc is seeking a full time Junior Quality Inspector to join our team. You will conduct tests to determine the quality of finished materials and finished products. Alternative Workweek Schedule -Hours are Monday - Thursday 7:00am - 5:30pm Benefits include: Health, dental, vision, life insurance, profit sharing, vacation, sick pay Responsibilities: Inspect in-process production by confirming specifications, conducting visual measurement tests, and communicating required adjustments to the production supervisor or machine operator. Approves finished products by confirming the specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Documents inspection results by completeing reports and logs. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations. Be a team member of the Quality department and support production and other internal departments to further th interest of the company. Qulaifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication Basic computer and math skills to calibrate and measure specifications Blueprint reading Ability to use measuring devices such as gauges, meters and calipers Experience in the Aerospace industry a Plus Conversational Spanish a Plus About D.W. Mack Co., Inc : D.W. Mack Co., Inc. is a family owned business that has been in operation since 1969. We are a Tool & Die stamping house with in house Die making, EDM, CNC mill & CNC lathe capabilities. Most of our business is working with the aerospace industry. We are AS9100D certified.

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS Medical, dental, life insurance covered by the company 401(k) retirement plan with company match Two (2) weeks vacations Ten (10) paid holidays POSITION SUMMARY This position performs works related to online inspection, sanitation inspection, receiving inspection, and other activities related to quality assurance and quality control. ESSENTIAL FUNCTIONS Online Inspection Conduct online inspections and verify the control parameters according to procedures and instructions for production, filling and packaging process. Record result of inspection, including weigh-up, filling temperature, packaging material, product code, container closure, etc. Perform GMP/hygiene inspection based on GMP and hygiene standards. Correct GMP/hygiene violation and report to production supervisor and/or QA Manager. All jobs shall be conducted timely according to QA/QC work instruction. Sanitation Inspection Conduct daily and monthly sanitation inspections, including pre-operation inspection and post-operation inspection. Perform ATP test and environmental swabbing. Monitor environmental air quality and inspect employees' hygiene condition. Record the result of inspection and communicate with Production Supervisor and Quality Assurance Manager. Receiving Inspection procedures Inspect incoming raw materials and packaging materials according to QA/QC work instruction. Take samples when needed according to the receiving manual Organize and update Raw Material Manual. Organize and update receiving records. Organize and update COA from suppliers Other tasks Observe and record nonconforming products / production and promptly communicate with production supervisor and Quality Assurance Manager or designee for immediate action. Make routine decisions for product holding, production line holding, etc, and verify correction and corrective action and document the incident accordingly. Calibrate equipments used for inspections and report immediately if the device is malfunction. Assist Quality Assurance Manager with any tasks related to quality compliance. Perform other special assignment from the management. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE This position requires with minimum a high school diploma or general education (GED). Candidate must be able to work independently and in cross-functional teams to achieve established goals. Individual must be detailed-oriented, quality-oriented, with high sense of responsibility. LANGUAGE SKILLS Candidate must be able to speak, write, read and understand English to perform daily functions. Bilingual in English/Chinese or Spanish preferred. MATHEMATICAL SKILLS Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Ideal candidate must be able to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. CERTIFICATES, LICENSE, REGISTRATIONS Not required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to perform daily job functions. The employee is required to stand, sit, kneel, and walk when performing essential job functions. Occasional lifting and/or move up 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment may be high and individual who works in certain areas needs to wear proper PPE (Personal Protective Equipment). Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee's policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Job Posting Start Date 10-15-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

SPT Labtech is a global supplier of innovative lab automation products for the life science markets. Our solutions save time and material costs and simplify complex operations. We are natural innovators. We create, design and manufacture high quality, robust and innovative automated laboratory equipment for academic, pharmaceutical and biotechnology research. We are looking for a talented Quality Control Inspector to join our growing team. You must have the ability to work on complex products and to work collaboratively and flexibly across several inter-disciplinary teams. Inspector Job Responsibilities: Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspect in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Reject all in-coming materials, in-process production, and finished goods products that fail to meet quality standards by specifications or quality criteria through non-conformance process. Assists Quality team members or management with failure and nonconformance data recording and reporting Prioritizes schedules based on product introduction and manufacturing schedules, maintaining a minimum turnaround time. Accomplishes quality and organization mission by completing tasks and responsibilities as needed. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Support the engineering manager or take ownership in resolving quality-related issues in a timely manner Recommend improvements to the production and quality control inspection process to ensure quality control. Be a team member of the quality department and support Production, Engineering and other internal departments to further the interests of the company as a whole. Requirements Written and verbal communication skills Experience with inspecting electromechanical assemblies, machined and metal fabrication highly desired. CMM experience a plus Basic math skills Excellent computer skills to include use of MS Office Attention to detail Analytic skills Documentation skills Time management skills Flexibility and able to change priorities on short notice based on production demands Hand/eye coordination Reporting skills Blueprint reading Education and Experience Requirements: High school diploma Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments One to two years' quality inspector experience Knowledge of ISO and QMS is highly desired Benefits 401(k) Health insurance Dental insurance Vision insurance Paid time off SPT Labtech is committed to a diverse and inclusive workplace. SPT Labtech is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Role: The QC Inspector plays a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections and tests on raw materials, in-process components, and finished goods to identify defects or deviations from specifications. The QC Inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate documentation and reporting, the inspector supports continuous improvement initiatives and helps uphold the company's reputation for excellence. Ultimately, this role ensures that only products meeting the highest quality criteria reach customers, thereby safeguarding customer satisfaction and company success. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or inspection within a manufacturing environment. Familiarity with quality control procedures, inspection techniques, and measurement tools. Basic understanding of manufacturing processes and product specifications. Ability to read and interpret technical drawings and quality documentation. Preferred Qualifications: Certification in Quality Control or related fields (e.g., ASQ Certified Quality Inspector). Experience with statistical process control (SPC) and root cause analysis. Proficiency in using digital measurement instruments and quality management software. Knowledge of ISO 9001 or other relevant quality management systems. Strong problem-solving skills and attention to detail. Responsibilities: Perform visual and dimensional inspections of materials and products at various stages of the manufacturing process. Utilize measurement tools and testing equipment to verify product specifications and tolerances. Document inspection results accurately and report any non-conformances or quality issues to the quality control manager. Collaborate with production and engineering teams to investigate defects and implement corrective and preventive actions. Ensure compliance with company quality standards, safety regulations, and industry guidelines during all inspection activities. Maintain inspection equipment and ensure calibration is up to date to guarantee measurement accuracy. Participate in internal audits and assist in external quality audits as required. Skills: The QC Inspector applies their skills daily by meticulously examining products to ensure they meet all quality standards, using both visual assessment and precise measurement tools. Their ability to interpret technical drawings and specifications allows them to identify deviations and potential defects early in the production process. Communication skills are essential as they report findings clearly and collaborate with cross-functional teams to resolve quality issues effectively. Analytical skills support their role in conducting root cause analysis and contributing to continuous improvement efforts. Additionally, proficiency with quality management software and inspection equipment ensures accurate data recording and compliance with regulatory requirements.

TempToFT Are you detail-driven with a passion for precision electronics? Come join the team of a leading electronics manufacturer, and help ensure the highest standards in quality and compliance. Responsibilites • Conduct in-process and first article inspections using customer drawings • Record inspection results and maintain accurate QC documentation • Inspect electronic assemblies and components to IPC and ANSI Class 3 standards • Monitor wave soldering processes and verify operator self-inspections • Use microscopes and precision tools to inspect PCBs and support soldering tasks Required • High school diploma with 5+ years in EMS or OEM electronics manufacturing • Skilled in blueprint reading, assembly instructions, and IPC/ANSI/NASA standards • Experienced in ISO 9001, AS9100, NADCAP environments and AS9102 documentation • Strong English communication; familiar with AOI equipment 23.00 Qualifications High School Diploma/GED 5+ years in EMS or OEM electronics manufacturing