Quality control inspector jobs in Mississippi - 167 jobs

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. We need two Quality Engineering Technicians to support key quality areas including Supplier Quality Assurance (SQA), Continuous Improvement, ISO 9001 compliance, and QA operations. These roles will help track supplier issues, verify incoming parts, and close supplier-related defects faster; collect and analyze data to identify root causes and support corrective and preventive actions; assist with audits, documentation, and corrective action tracking to maintain ISO readiness; and provide QA coverage across both shifts to reduce issue carryover, improve response time, and increase efficiency. Adding these positions will reduce defect recurrence and supplier-related downtime, improve turnaround time for quality issues, strengthen compliance and audit readiness, and free engineers to focus on higher-level improvements. @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Basic Purpose: The Quality inspector is responsible for performing in-process and final quality inspections of fabricated components, painted parts, and finished assemblies to ensure all products meet established quality standards. This role supports quality assurance efforts by maintaining inspection documentation and verifying that finished products comply with bill of materials and customer requirements prior to release. This position reports to the Compliance & Quality Manager. Primary Accountabilities: Implement Quality Management Strategy: Review and execute quality management plans that cover the full production process, ensuring adherence to all quality standards from receipt of materials to final delivery. Create and Maintain Quality Control Checklists: Develop and maintain detailed checklists that establish clear standards for production activities, ensuring the final product meets customer order specifications and bill of materials. Monitor Performance and Take Corrective Action: Continuously monitor performance according to established quality standards, including fabricated parts, enclosure assemblies, and painted components. Identify deviations from the standards, communicate findings to appropriate personnel in a timely manner, and follow up to ensure corrective actions are implemented and effective. Inspect Fabricated Parts and Assemblies: Verify dimensions, forming, and workmanship of fabricated parts and enclosures during the assembly process to ensure conformance with engineering drawings and quality standards. Measure and Record Paint Quality Data: Perform and document dry film thickness (DFT) measurements on the paint line to ensure coating applications meet required specifications and quality standards. Inspect Finished Units for Conformance: Perform thorough inspections of all finished units to ensure they comply with the bill of material specifications, confirming that the units have no deficiencies prior to release for delivery to customers. Maintain Quality Records and Documentation: Maintain accurate inspection records, including photographs, measurements, and completed checklists, organized by serial numbers. Utilize company Quality Control software to document inspection results and track quality data. Establish Communication Strategies for Quality Awareness: Promote quality awareness across the production floor and paint line. Support continuous improvement initiatives through clear communication, collaboration, and proactive problem-solving. Support Root Cause Analysis: Collaborate cross-functionally with production, fabrication, paint, engineering, and quality teams to assist in identifying root causes of quality issues using structured problem-solving methods. Additional Tasks as Requested: Perform any other tasks as assigned by the Compliance & Quality Manager to support the overall quality program, including participating in audits, assisting with supplier quality issues, and engaging in ongoing training to stay current with industry best practices. Qualifications Qualifications: High school diploma or equivalent; further technical education or certification in quality control is a plus. Previous experience in quality control or inspection within a manufacturing environment preferred. Strong attention to detail and ability to identify quality issues. Excellent organizational and documentation skills. Strong computer and technology skills Ability to work independently and as part of a team. Knowledge of quality standards and inspection tools. Familiarity with ISO 9001 or similar quality management systems Ability to read and interpret engineering drawings, work instructions, and weld symbols is preferred

_239 69th Avenue, Meridian, MS, USA_ | _Hourly_ | _Full Time_ Ensures the quality of incoming and outgoing products or materials by conducting tests, analyzing measurements, and overseeing production processes. - Inspect finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. - Perform quality control inspections, checks, and tests during the manufacture of products. - Inspect materials, parts, and products at different stages of production. - Check and verify the accuracy and completion of manufacturing SOPs or checklists at stages of production. - Report conditions leading to quality defects or anything requiring immediate repair. - Use advanced inspection methods to execute on manufacturing quality programs. - Keep records and makes reports indicating results of inspections and communicate to management. - Inspect work areas to detect, correct, and resolve any unsafe conditions or products. - Obtain samples to conduct studies in laboratory analysis and determine measures to be taken to remedy deviations from standards - Record observations and may make recommendations for improving processes. **Required Qualifications** - Required qualifications to effectively perform the job. An equivalent combination of education, training and experience will be considered. (Additional requirements may be designated by position.) - This position requires a high school diploma or equivalent. - One to three years of related experience. - Knowledge of welding techniques, welding quality, and troubleshooting typical welding issues, welding certification is preferred - Ability to follow blueprints and welding symbols - Preference for those who have or are able to obtain ACI Concrete field-testing Grade 1 Certification **Knowledge, Skills and Abilities** - May be representative, but not all-inclusive, of those knowledge, skills and abilities commonly associated with this position. - Proficient in Microsoft Office products - specifically Excel, Word, and Outlook. - Critical thinker with exceptional attention to detail. - Excellent problem-solving skills. - Excellent communication skills, both verbally and in writing. - Ability to effectively organize and prioritize work as well as concentrate on multiple tasks simultaneously. - Ability to develop and maintain effective working relationships. **Work Environment** - Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. - General office conditions. Exposed to moderate noise levels. - General factory conditions. Exposed to high noise levels, variable temperatures, and uneven terrain. **Physical Abilities** - Activities commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. - Required to use close vision and be able to focus. - Regularly required to talk and hear; frequently required to sit, stand and bend at the knee and waist, and walk. - Must be able to have repetitive wrist, hand and/or finger movement to type and work on computer. - Must have finger dexterity and hand-eye coordination to work on computer, measuring tapes, rulers, telephones, and related office equipment. - Regular attendance is a necessary and essential function. Fairbanks Scales Inc. is an Equal Opportunity Employer including Disability/Vets DISCLOSURE REGARDING BACKGROUND INVESTIGATION Fairbanks Scales Inc. may obtain information about you from a third-party consumer reporting agency for employment purposes. Thus, you may be the subject of a "consumer report" and/or "investigative consumer report" which may include information about your character, general reputation, personal characteristics, and/or mode of living, and which can involve personal interviews with sources such as neighbors, friends, or associates, The reports may contain information regarding your credit history, criminal history, social security verification, motor vehicle records ("driving records"), verification of your education or employment history, or other background checks. Credit history will only be requested where such information is substantially related to the duties and responsibilities of the position for which you are applying. NOTIFICATION OF PRE-EMPLOYMENT DRUG SCREENING Fairbanks Scales Inc. performs post-offer, pre-employment drug testing for all roles prior to being hired into any role as part of our Drug Free Workplace Policy. In addition, Fairbanks Scales Inc. performs post-offer, pre-employment drug testing under the authority of the U.S. Department of Transportation prior to being hired for any role or transferred into a safety-sensitive role.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

PRIMARY FUNCTION: Primarily responsible for verification of production processes, packaging, food safety and monitoring of operational sanitation. Responsible for proper documentation, inventory control, and release of hold product. Assist production Team Members, Team Leaders, and Supervisors in assuring that safe and quality products are produced according to specification. Performs all work in compliance with company policies, NCC Animal Welfare Guidelines and local, state and federal policies, laws and regulation RESPONSIBILITIES AND TASKS: Under minimal supervision, communicate with Production & QA Team Members, Team Leaders, and Supervisors to assure proper handling of all products and timely correction of deficiencies Monitor lines and paperwork throughout the day to assure specification compliance for each product Verify and help enforce GMP's Verify labels, lot codes, bags, boxes, and pallets are correctly adhered, printed, sealed, and stacked Verify receiving of incoming raw materials and ingredients, informs Shipping/Receiving Team Leader and QA Team Leader or QA Coach if any product does not meet specifications Assist Production with day to day quality problems to reach workable solutions Assure microbiological swabs and samplings are performed at correct times and correct positions Assist in making sure all quality and food safety policies and procedures are being followed Work in compliance with all company policies, NCC Animal Welfare Guidelines and local, state and federal policies, laws and regulations All other duties as assigned EDUCATION AND CERTIFICATIONS: High School Diploma or equivalent EXPERIENCE AND SKILLS: Minimum 1 year experience in quality assurance or 6 months WayneSanderson Farms employee Intermediate math (add, subtract, multiply and divide) and computer skills Detail oriented Must have the ability to effectively communicate in English, both verbal and written, with internal and external customers in a timely and professional manner; ability to communicate in multiple languages preferred Sound work ethic, honesty and moral character SAFETY REQUIREMENTS: Follow departmental and company safety policies and programs Must wear Personal Protective Equipment (PPE) at all times in areas where required. PHYSICAL REQUIREMENTS: Stand up to 8 hours. Lift up to 60 lbs. Exposure to wet and dusty environment. Frequently reaching, bending, stooping, kneeling and crawling. Work around raw, live animal odors Ability to work nights, weekends, holidays and extended shift hours We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. Join the Airbus Helicopters team as a Quality Inspector A, where your technical mastery meets world-class aerospace engineering. You will be responsible for the end-to-end quality lifecycle of our aircraft, ensuring total compliance with FAA and EASA regulations. What You'll Do: * Total Aircraft Inspection: Execute detailed inspections across aircraft systems, including dimensional checks, hidden damage assessments, and functional testing. * Material Excellence: Approve or reject incoming materials, ensuring only the highest quality components enter our production line. * Master the Tools: Utilize a variety of precision aids and devices to determine specification limits with absolute accuracy. * Airworthiness Authority: Take ownership of the final "stamp of approval," certifying that our helicopters are safe, compliant, and ready for the sky. Meet The Team: From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen. Your Working Environment: On the eastern border of Mississippi you'll find Columbus, home to our Helicopter manufacturing and assembly lines and Center of Excellence for the entire North America region. It's here that we produce the UH-72A Lakota Helicopters for the U.S. Army in addition to the H-125 aircraft for civil and commercial customers. Your challenges: Inspection: 60% * Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts * Perform in-process inspections for components in electrical backshops, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint * Perform detailed inspections of manufactured components such as but not limited to dimensional checks and acoustic tap testing * Inspect aircraft aluminium, titanium or steel structures for cracks, corrosion, damage and improper assembly. * Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data * Detect hidden damage during inspections of airframe structures, components and sub-assemblies that could occur during shipping, receiving, or manufacturing * Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings * Physically and systematically quarantine non-conforming components and assemblies identified during inspections * Monitor the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle * Perform stock inspections/purges when notified of possible non-conforming/suspected unapproved material * Evaluate and disposition sales returns * Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals * Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub-assemblies * Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components * Inspect multiple airframe components to determine proper fit, form and function of the components * Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data * Qualify dynamic component parts applying visual inspection and precision measurement methods. * Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications * Ensure compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins * Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43 Documentation: 30% * Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories * Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness * Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed * Create QN/NCs for non-conforming material detected and coordinate with Quality Engineers on non-conformity resolution * Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance) * Process Goods Receipts during receiving of material * Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures. * Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components * Read and validate engineering drawings, reports, and test specifications * Properly identify and document items in quality quarantine cage * Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification * Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems 3. Quality Department Support/Continuous Improvement: 10% * Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability * Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion * Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness * Ensure compliance with company policies, procedures and FAA & EASA Regulations * Support Company events, departmental meetings, special projects and team meetings * Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are met Additional Responsibilities: * Other duties as assigned at management discretion Your boarding pass: Education: * High School Diploma or equivalent * * Current/Valid FAA Airframe & Power Plant License* * ·4 years of quality inspection on aircraft components and systems --or-- * ·6 years as an aviation maintenance technician (AMT) on aircraft components and systems * Ability to interpret technical and regulatory documentation * Familiar with inspection tools, aids and devices used in determining tolerances and specification limits * Part 145 Repair Station experience Preferred Education/Skills: * Proficiency in French, German or Spanish * FAA Inspection Authorization (IA) * FCC 2nd Class License * Non Destructive Inspection (NDI) Certificate * Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector * Associates Degree in Aviation or related industry Physical Requirements: * Onsite: 100% unless on business travel. * Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable. * Hearing: able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily. * Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily. * Equipment Operation: able to operate most office and personal electronic equipment and some tools daily. * Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily. * Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily. * Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily. * Sitting: able to sit for long periods of time in meetings, working on computer several times a week. * Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily * Standing: able to stand for discussions in offices or on production floor daily. * Travel: able to travel independently and at short notice 15% or less yearly. * Walking: able to walk through office and production areas including uneven surfaces daily. * Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters, Inc. Employment Type: Agency / Temporary Experience Level: Professional Remote Type: On-site Job Family: Quality Inspection * ----- Job Posting End Date: 01.31.2026 * ----- Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. Join the Airbus Helicopters team as a Quality Inspector A, where your technical mastery meets world-class aerospace engineering. You will be responsible for the end-to-end quality lifecycle of our aircraft, ensuring total compliance with FAA and EASA regulations. What You'll Do: Total Aircraft Inspection: Execute detailed inspections across aircraft systems, including dimensional checks, hidden damage assessments, and functional testing. Material Excellence: Approve or reject incoming materials, ensuring only the highest quality components enter our production line. Master the Tools: Utilize a variety of precision aids and devices to determine specification limits with absolute accuracy. Airworthiness Authority: Take ownership of the final "stamp of approval," certifying that our helicopters are safe, compliant, and ready for the sky. Meet The Team: From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen. Your Working Environment: On the eastern border of Mississippi you'll find Columbus, home to our Helicopter manufacturing and assembly lines and Center of Excellence for the entire North America region. It's here that we produce the UH-72A Lakota Helicopters for the U.S. Army in addition to the H-125 aircraft for civil and commercial customers. Your challenges: Inspection: 60% Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts Perform in-process inspections for components in electrical backshops, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint Perform detailed inspections of manufactured components such as but not limited to dimensional checks and acoustic tap testing Inspect aircraft aluminium, titanium or steel structures for cracks, corrosion, damage and improper assembly. Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data Detect hidden damage during inspections of airframe structures, components and sub-assemblies that could occur during shipping, receiving, or manufacturing Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings Physically and systematically quarantine non-conforming components and assemblies identified during inspections Monitor the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle Perform stock inspections/purges when notified of possible non-conforming/suspected unapproved material Evaluate and disposition sales returns Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub-assemblies Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components Inspect multiple airframe components to determine proper fit, form and function of the components Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data Qualify dynamic component parts applying visual inspection and precision measurement methods. Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications Ensure compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43 Documentation: 30% Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed Create QN/NCs for non-conforming material detected and coordinate with Quality Engineers on non-conformity resolution Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance) Process Goods Receipts during receiving of material Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures. Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components Read and validate engineering drawings, reports, and test specifications Properly identify and document items in quality quarantine cage Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems 3. Quality Department Support/Continuous Improvement: 10% Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness Ensure compliance with company policies, procedures and FAA & EASA Regulations Support Company events, departmental meetings, special projects and team meetings Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are met Additional Responsibilities: Other duties as assigned at management discretion Your boarding pass: Education: High School Diploma or equivalent *** Current/Valid FAA Airframe & Power Plant License*** ·4 years of quality inspection on aircraft components and systems --or-- ·6 years as an aviation maintenance technician (AMT) on aircraft components and systems Ability to interpret technical and regulatory documentation Familiar with inspection tools, aids and devices used in determining tolerances and specification limits Part 145 Repair Station experience Preferred Education/Skills: Proficiency in French, German or Spanish FAA Inspection Authorization (IA) FCC 2nd Class License Non Destructive Inspection (NDI) Certificate Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector Associates Degree in Aviation or related industry Physical Requirements: Onsite: 100% unless on business travel. Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable. Hearing: able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily. Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily. Equipment Operation: able to operate most office and personal electronic equipment and some tools daily. Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily. Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily. Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily. Sitting: able to sit for long periods of time in meetings, working on computer several times a week. Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily Standing: able to stand for discussions in offices or on production floor daily. Travel: able to travel independently and at short notice 15% or less yearly. Walking: able to walk through office and production areas including uneven surfaces daily. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters, Inc. Employment Type: Agency / Temporary Experience Level: Professional Remote Type: On-site Job Family: Quality Inspection ------ Job Posting End Date: 01.31.2026 ------ Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures Ensuring Compliance with Procedures Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: Monitoring and reporting on COMBS warehouse supply procedures. Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. Investigate and submit items for warranty claims when required. Accomplishing forms and documentation reviews as required. Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. Accomplishing site training for new personnel and assisting with training records maintenance. Monitor and maintain tool calibration and assist with GSB maintenance as needed. Setting up and maintaining the Technical Library. Performing QEC installation inspections. Cleaning of warehouse, shops, offices and restroom as required. Clerical and other assigned duties as required. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). Thorough knowledge of warehouse shipping and receiving procedures. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. Education and Experience: Valid FAA Airframe and Powerplant Certificate. Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. Documented proof of aircraft mechanic experience. Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures + Ensuring Compliance with Procedures + Dealing with Coworkers/Clients/Public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Monitoring and reporting on COMBS warehouse supply procedures. + Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. + Investigate and submit items for warranty claims when required. + Accomplishing forms and documentation **reviews as required.** + **Advises** management on revising inspection/receiving regulations, _as_ required, to meet contractual requirements. + Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to **be damaged when received.** + Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. + Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. + Accomplishing site training for new personnel and assisting with training records maintenance. + Monitor and maintain tool calibration and assist with GSB maintenance as needed. + Setting _up_ and maintaining the Technical Library. + Performing QEC installation inspections. + Cleaning of warehouse, shops, offices and restroom as required. + Clerical and other assigned duties as required. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities** (Required Skills include the ability to:) + Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). + Thorough knowledge of warehouse shipping and receiving procedures. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. + **Education and Experience:** + Valid FAA Airframe and Powerplant Certificate. + Graduation from a standard four (4) year high school or equivalent (GED) **AND** a Minimum of **FIVE** years' recent experience in aircraft maintenance. + Documented proof of aircraft mechanic experience. **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures * Ensuring Compliance with Procedures * Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: * Monitoring and reporting on COMBS warehouse supply procedures. * Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. * Investigate and submit items for warranty claims when required. * Accomplishing forms and documentation reviews as required. * Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. * Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. * Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. * Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. * Accomplishing site training for new personnel and assisting with training records maintenance. * Monitor and maintain tool calibration and assist with GSB maintenance as needed. * Setting up and maintaining the Technical Library. * Performing QEC installation inspections. * Cleaning of warehouse, shops, offices and restroom as required. * Clerical and other assigned duties as required. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). * Thorough knowledge of warehouse shipping and receiving procedures. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. * Education and Experience: * Valid FAA Airframe and Powerplant Certificate. * Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. * Documented proof of aircraft mechanic experience. Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Perform in-process, start-up, final and first article inspection of injection molded parts per Corelle Brands Policies and Procedures. Primary Responsibilities: In-process inspection of injection molded parts for critical dimensions, form, fit and function per the Corelle Brands Inspection Plans. Meet with the previous shift inspector (at shift change) to go over any production issues discovered from the off-going shift. Audit each press to ensure that the product being produced, dimensionally, visually, packaging labeling and palletizing, conform to Corelle Brands standards. Perform First Article Inspection of injection molded parts, per First Article Inspection procedure. Process discrepant Material per Nonconforming Product Standard Operating Procedure. Complete all assigned audit forms daily. The audit forms include but are not limited to: Quality Assurance Inspection Log, In-Process Visual Inspection Log, Inspection History Cards, Quality Assurance Daily Information Log and Line Clearance Log Re-Inspect the product after disposition has been completed. Assist in training manufacturing personnel on quality requirements, as necessary. Perform other duties as instructed by the Q.A. supervisor or as necessary to maintain efficient operation at Corelle Brands. Required Qualifications: High School Diploma /GED 2+ years' experience in Quality Preferably experience with working in a fast-paced assembly environment. Ability to regularly lift and or move up to 10 pounds and occasionally lift and or move up to 50 pounds. If over 50 lbs., team lift is required. Software: Excel, Word, Outlook Familiar with basic quality assurance tools (e.g. calipers, micrometers). Must be familiar with Statistical Process Control (SPC) for Variable/ Attribute charting. Must be able to read, write, speak, and understand English. Ability to read Engineering drawings

Temp Immediate opening for a Quality Inspectors in the Madison, MS area. All candidates must be able to pass a pre-employment drug screen and criminal background check. * Automotive Manufacturing and/or Quality Control Experience a plus * Familiar with containment - inspection, sort and rework of components * Long term contract assignment * Fluent in spoken and written English * High school diploma or GED preferred * Must be 19 years of age or older * Must be a team player, take directions and have a sense of urgency * Mature, professional attitude, reliable transportation and professional appearance required various, Madison, MS 39110, United States of America

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to thrive and deliver your best. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Learn more about our story HERE. Your Role: The Quality Technician is responsible for following procedures to ensure part and material conformance per specifications utilizing safety standards as required. Quality Technician 1 will demonstrate the ability to work with minimal supervision in multiple disciplines listed below in this description. Duties and Responsibilities: Metrology · Use lab equipment for gage calibration and auditing parts. · Conduct heat treat testing per specification. · Manage calibration recordkeeping and update records on system. · Setup and operate Vision system to measure angles, lengths, radii, and center distances. · Take appropriate corrective action for continuous quality improvement and customer satisfaction. · Know and practice the 5 S's for industrial housekeeping. · Operate lab equipment and gages properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Receiving Inspection · Inspect all incoming material and parts per quality specification after being received in cell. · Maintain receiving files and records per requirements. · Place kanban cards on inspected material. · Create and complete NCR's, SCAR's, and CAR's and enter information into computer. · Perform workplace audits with documented results. · Set up and operate gages to accurately inspect material and parts. · Control scrapped or rejected parts until disposition is determined. · Perform preventative maintenance as required. · Take appropriate corrective action for continuous quality improvement and customer satisfaction. · Know and practice the 5S's for industrial housekeeping. · Operate tools, and equipment properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Heat Treat · Preparation of test samples through a process of polishing and chemical activation of sample surface. · Set up and operation of gages to accurately inspect material hardness and micro-hardness. · Creation of test samples through the use of specialized cutting equipment. · Maintain files and records per requirements. · Take appropriate corrective action for continuous quality improvement and customer satisfaction. · Know and practice the 5S's for industrial housekeeping. · Operate tools, presses and equipment properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Auditing · Conduct recon tools, accessories packaging, and accessories manufacturing audits daily utilizing print and process control plan specifications. · Disassemble and analyze product during the performance of a teardown audit. · Perform Process Control Plan audits when required. · Investigate and use SPC tools for problem solving failures and rejects. · Maintain and complete proper records and documentation. · Take appropriate corrective action for continuous quality improvement and customer satisfaction including NCR, SCAR, and CAR databases for non-conforming product. · Use gauges and other equipment to measure tolerances and dimensions of parts per specifications. · Know and practice the 5S's for industrial housekeeping. · Operate tools, and equipment properly and adhere to all safety requirements in the work area. · Able to react to change effectively and handle other tasks as assigned. Battery Warranty Analysis · Conduct warranty analysis on batteries returned from Authorized Service Centers and Authorized Distributors per the Battery Return Policies currently in place. · Maintain and complete proper records and documentation. · Prepare batteries for recycling once they have been evaluated. · Know and practice the 5S's for industrial housekeeping. · Able to react to change effectively and handle other tasks as assigned. Education · Requires an education equivalent to high school diploma or GED. · Technical certification is preferred Experience · Quality assurance or quality control experience preferred. · Experience reading prints and using gages required. · Vendor/supplier relations experience helpful. Knowledge Required · Computer experience and experience using SPC techniques helpful. · Excellent organizational skills required. · Ability to perform work per instructions with minimal supervision, and within reasonable time. Milwaukee Tool is an equal opportunity employer. Shift hours: 1st-7am-3pm; 2nd shift-3pm-11pm; 3rd shift 11pm-7am Milwaukee Tool is an equal opportunity employer.

At Aurora Flight Sciences, we design, build, and fly advanced aircraft and enabling technologies from concept to reality. We are searching for a talented and self-motivated Quality Inspector - 3D to help us create the future of flight. Responsibilities will include but not be limited to the following: Responsibilities * Primarily reviews composite molded components/assemblies, but may also review sheet metal details and machined metal components. * Interprets design/process drawings, procedures, and specifications. * Creates routines for and performs inspection operations for Model Based Definition inspection utilizing CATIA files and Verisurf software for laser tracker instruments. * Analyze data from inspection operations to provide result reports and non-conformance reports as required. * Participate in company internal audits and support customer audits as required to support the quality management system goals. * Coordinate corrective action with operations, purchasing, production control, and liaison engineering. * Maintain quality departmental documentation, in written and computer formats, supporting inspection, certification reviews, and non-conforming reports as required. * Perform other duties as assigned. Minimum Requirements * Education/experience typically acquired through advanced education (e.g. Associate) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor, 3 years' related work experience, etc.). * Experience using CMM/PCMM equipment - strong preference in Verisurf and CATIA software including basic CAD skills related to import/export of file formats supporting theses devices; other formats may be considered based on industry experience and product type: [surface plate / 2D height gage layout, calipers, micrometers, functional gages, etc.] visual inspection techniques, basic shop math geometry, and GD&T. * Able to read and interpret engineering drawings, military, and industrial specifications/standards. * Proficiency in verbal and written technical communication, and able to work from written or verbal instructions. * Basic math and computer skills with proficiency in MS Office Software. * Must be a US Person. Preferred Requirements * Associate degree in a technical discipline. * Experience in aerospace production facility. * Experience in carbon composite aerospace manufacturing processes. * Experience in Laser Tracker Systems and optical scans desired, Leica preferred. Physical Requirements * Ability to work in a manufacturing environment and wear proper PPE. * Pass annual visual acuity exams. * Physical dexterity sufficient to use hand inspection tools and equipment. * Able to lift 35lbs. safely without special accommodations and stoop, crawl, bend, crouch, climb, and kneel. * Capable of lifting/maneuvering/assembling/using 3D measuring equipment. * Work onsite in Columbus, MS. * Availability to work any shift, including off-shifts, overtime, and weekends. Salary Range (Annualized USD) * Minimum Range: $38,000.00 to $68,000.00 * Maximum Range: $45,000.00 to $79,000.00

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Quality Technician: Performs functions associated with quality control and quality assurance operations, including working with engineers in set-up and calibration tasks and carrying out rework and quality assurance procedures related to production or operations. Uses sophisticated programs to collect and evaluate data to assist in assessing and documenting results of quality assurance and control processes. Determines and may assist in developing methods and procedures for quality assurance and control. Works with engineers in conducting experiments. Survey Tip: Technicians involved primarily with performing inspections, checks testing and sampling procedures for product manufacturing processes should be matched to QC Inspector (7681-7684). @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Ensures the quality of incoming and outgoing products or materials by conducting tests, analyzing measurements, and overseeing production processes. • Inspect finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. • Perform quality control inspections, checks, and tests during the manufacture of products. • Inspect materials, parts, and products at different stages of production. • Check and verify the accuracy and completion of manufacturing SOPs or checklists at stages of production. • Report conditions leading to quality defects or anything requiring immediate repair. • Use advanced inspection methods to execute on manufacturing quality programs. • Keep records and makes reports indicating results of inspections and communicate to management. • Inspect work areas to detect, correct, and resolve any unsafe conditions or products. • Obtain samples to conduct studies in laboratory analysis and determine measures to be taken to remedy deviations from standards • Record observations and may make recommendations for improving processes. Required Qualifications - Required qualifications to effectively perform the job. An equivalent combination of education, training and experience will be considered. (Additional requirements may be designated by position.) • This position requires a high school diploma or equivalent. • One to three years of related experience. • Knowledge of welding techniques, welding quality, and troubleshooting typical welding issues, welding certification is preferred • Ability to follow blueprints and welding symbols • Preference for those who have or are able to obtain ACI Concrete field-testing Grade 1 Certification Knowledge, Skills and Abilities - May be representative, but not all-inclusive, of those knowledge, skills and abilities commonly associated with this position. • Proficient in Microsoft Office products - specifically Excel, Word, and Outlook. • Critical thinker with exceptional attention to detail. • Excellent problem-solving skills. • Excellent communication skills, both verbally and in writing. • Ability to effectively organize and prioritize work as well as concentrate on multiple tasks simultaneously. • Ability to develop and maintain effective working relationships. Work Environment - Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. • General office conditions. Exposed to moderate noise levels. • General factory conditions. Exposed to high noise levels, variable temperatures, and uneven terrain. Physical Abilities - Activities commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Required to use close vision and be able to focus. • Regularly required to talk and hear; frequently required to sit, stand and bend at the knee and waist, and walk. • Must be able to have repetitive wrist, hand and/or finger movement to type and work on computer. • Must have finger dexterity and hand-eye coordination to work on computer, measuring tapes, rulers, telephones, and related office equipment. • Regular attendance is a necessary and essential function. Fairbanks Scales Inc. is an Equal Opportunity Employer including Disability/Vets DISCLOSURE REGARDING BACKGROUND INVESTIGATION Fairbanks Scales Inc. may obtain information about you from a third-party consumer reporting agency for employment purposes. Thus, you may be the subject of a "consumer report" and/or "investigative consumer report" which may include information about your character, general reputation, personal characteristics, and/or mode of living, and which can involve personal interviews with sources such as neighbors, friends, or associates, The reports may contain information regarding your credit history, criminal history, social security verification, motor vehicle records ("driving records"), verification of your education or employment history, or other background checks. Credit history will only be requested where such information is substantially related to the duties and responsibilities of the position for which you are applying. NOTIFICATION OF PRE-EMPLOYMENT DRUG SCREENING Fairbanks Scales Inc. performs post-offer, pre-employment drug testing for all roles prior to being hired into any role as part of our Drug Free Workplace Policy. In addition, Fairbanks Scales Inc. performs post-offer, pre-employment drug testing under the authority of the U.S. Department of Transportation prior to being hired for any role or transferred into a safety-sensitive role.

Quality Inspector -Level 1 Taylor Defense Products, LLC 107 Thompson Street Louisville, MS 39339 Taylor Defense Products was established in 2017 as part of the Taylor Group of Companies. Our mission is to provide the U.S. Military, its allies, and the U.S. government with the longest-lasting, best-supported, and lowest total cost material handling, construction, engineering, and logistics products. Taylor Defense has been rewarded for our performance and continues to capture additional work, fueling our growth and expansion. We operate in a culture of high expectation and high personal responsibility. Our team-oriented approach and flat organizational structure support rapid decision-making, rewarding results, and personal growth. Like our customers, we are looking for a few good men and women to join our team. Position Overview We are seeking a motivated and detail-oriented Level 1 Quality Inspector to support our defense fabrication and assembly operations at Taylor Defense Products. This role is instrumental in ensuring that all welding, machining, and mechanical assembly processes meet stringent military, commercial, and internal quality requirements. The ideal candidate will have experience in a manufacturing environment, preferably in defense, aerospace, or heavy equipment sectors, and be comfortable inspecting components across multiple production disciplines including welded assemblies, machined parts, and mechanical systems. The Quality Inspector will report to the Quality Manager and collaborate closely with welders, machinists, assemblers, engineers, and supervisors to ensure all products conform to drawing specifications, applicable standards, and customer expectations. Duties & Responsibilities Perform in-process and final inspections on welded, machined, and assembled components to verify dimensional accuracy, workmanship, and conformance to drawing and specification requirements. Inspect welds visually in accordance with AWS D1.1 and/or project-specific standards; familiarity with MIL-STD-3040A preferred. Utilize precision measurement tools (e.g., calipers, micrometers, height gauges, indicators) to inspect critical dimensions of machined and assembled components. Interpret engineering drawings, blueprints, and GD&T callouts to validate proper fit, form, and function. Verify part traceability, material certifications, and ensure build documentation is complete and compliant. Record and report inspection findings; issue nonconformance reports (NCRs) as required. Support first article inspections (FAI) and assist with part validation per internal procedures. Collaborate with production teams to identify quality trends, support root cause analysis, and implement corrective/preventive actions. Assist with internal and customer audits and help maintain ISO 9001:2015 quality system requirements. Provide feedback and coaching to technicians and production operators on quality-related concerns. Qualifications Required Qualifications Minimum 3 years of quality inspection or equivalent experience in manufacturing, fabrication, or machining environments. Strong knowledge of mechanical inspection techniques and familiarity with weld and machining standards. Ability to read and interpret blueprints, welding symbols, and GD&T. Working knowledge of AWS D1.1 and ISO 9001:2015. Proficiency in Microsoft Office and ability to complete digital inspection records accurately. Excellent communication skills and attention to detail. Ability to work independently in a fast-paced production environment. Preferred Qualifications Experience with defense or government fabrication programs. Familiarity with MIL-STD-3040A, MIL-DTL-46100, or other defense-related material/weld specs. Prior hands-on experience in welding, machining, or assembly is a strong plus. Associate's degree in Industrial Technology, Quality, or related technical discipline. NDT Level I or II certifications a plus. Prior exposure to PPAP, FAI, or APQP processes. Job Requirements Ability to work in a manufacturing environment with exposure to welding, grinding, and heavy machinery. Capable of standing, walking, and climbing for extended periods. Must be able to lift up to 50 lbs. and use appropriate PPE. Occasional travel may be required for supplier or customer audits. Compensation Salary will be commensurate with experience. A comprehensive benefits package is provided, including healthcare, retirement, and paid time off. Benefits Include Medical/Prescription Dental Vision 10 Paid Holidays Paid Vacation 401(k) Retirement Plan Company-Paid Life Insurance

Perform in-process, start-up, final and first article inspection of injection molded parts per Corelle Brands Policies and Procedures. Primary Responsibilities: In-process inspection of injection molded parts for critical dimensions, form, fit and function per the Corelle Brands Inspection Plans. Meet with the previous shift inspector (at shift change) to go over any production issues discovered from the off-going shift. Audit each press to ensure that the product being produced, dimensionally, visually, packaging labeling and palletizing, conform to Corelle Brands standards. Perform First Article Inspection of injection molded parts, per First Article Inspection procedure. Process discrepant Material per Nonconforming Product Standard Operating Procedure. Complete all assigned audit forms daily. The audit forms include but are not limited to: Quality Assurance Inspection Log, In-Process Visual Inspection Log, Inspection History Cards, Quality Assurance Daily Information Log and Line Clearance Log Re-Inspect the product after disposition has been completed. Assist in training manufacturing personnel on quality requirements, as necessary. Perform other duties as instructed by the Q.A. supervisor or as necessary to maintain efficient operation at Corelle Brands. Required Qualifications: High School Diploma /GED 2+ years' experience in Quality Preferably experience with working in a fast-paced assembly environment. Ability to regularly lift and or move up to 10 pounds and occasionally lift and or move up to 50 pounds. If over 50 lbs., team lift is required. Software: Excel, Word, Outlook Familiar with basic quality assurance tools (e.g. calipers, micrometers). Must be familiar with Statistical Process Control (SPC) for Variable/ Attribute charting. Must be able to read, write, speak, and understand English. Ability to read Engineering drawings 2nd shift - 3:00pm - 11:30pm

The Quality Technician 1 is responsible for following procedures to ensure part and material conformance per specifications utilizing safety standards as required. Quality Technician 1 will demonstrate the ability to work with minimal supervision in multiple disciplines listed below in this description. Duties and Responsibilities Metrology Use lab equipment for gage calibration and auditing parts. Conduct heat treat testing per specification. Manage calibration recordkeeping and update records on system. Setup and operate Vision system to measure angles, lengths, radii, and center distances. Take appropriate corrective action for continuous quality improvement and customer satisfaction. Know and practice the 5 S's for industrial housekeeping. Operate lab equipment and gages properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned. Receiving Inspection Inspect all incoming material and parts per quality specification after being received in cell. Maintain receiving files and records per requirements. Place kanban cards on inspected material. Create and complete NCR's, SCAR's, and CAR's and enter information into computer. Perform workplace audits with documented results. Set up and operate gages to accurately inspect material and parts. Control scrapped or rejected parts until disposition is determined. Perform preventative maintenance as required. Take appropriate corrective action for continuous quality improvement and customer satisfaction. Know and practice the 5S's for industrial housekeeping. Operate tools, and equipment properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned Heat Treat Preparation of test samples through a process of polishing and chemical activation of sample surface. Set up and operation of gages to accurately inspect material hardness and micro-hardness. Creation of test samples through the use of specialized cutting equipment. Maintain files and records per requirements. Take appropriate corrective action for continuous quality improvement and customer satisfaction. Know and practice the 5S's for industrial housekeeping. Operate tools, presses and equipment properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned. Auditing Conduct recon tools, accessories packaging, and accessories manufacturing audits daily utilizing print and process control plan specifications. Disassemble and analyze product during the performance of a teardown audit. Perform Process Control Plan audits when required. Investigate and use SPC tools for problem solving failures and rejects. Maintain and complete proper records and documentation. Take appropriate corrective action for continuous quality improvement and customer satisfaction including NCR, SCAR, and CAR databases for non-conforming product. Use gauges and other equipment to measure tolerances and dimensions of parts per specifications. Know and practice the 5S's for industrial housekeeping. Operate tools, and equipment properly and adhere to all safety requirements in the work area. Able to react to change effectively and handle other tasks as assigned. Battery Warranty Analysis Conduct warranty analysis on batteries returned from Authorized Service Centers and Authorized Distributors per the Battery Return Policies currently in place. Maintain and complete proper records and documentation. Prepare batteries for recycling once they have been evaluated. Know and practice the 5S's for industrial housekeeping. Able to react to change effectively and handle other tasks as assigned. Education/ Requires an education equivalent to high school diploma or GED. Technical certification is preferred Experience Quality assurance or quality control experience preferred. Experience reading prints and using gages required. Vendor/supplier relations experience helpful. Knowledge Required Computer experience and experience using SPC techniques helpful. Excellent organizational skills required. Ability to perform work per instructions with minimal supervision, and within reasonable time Milwaukee Tool is an equal opportunity employer.