Quality control inspector jobs in New Bedford, MA

Location: Rochester MA (100% On-site), 1st shift only 6:30A-3:30P M-F, salary range $72K-$82K, full-time role: health insurance with an HRA, dental, vision, LTD, and a 401(k) retirement plan with an employer match. 3 weeks PTO, 1 week sick. Generous relocation package offered. Qualified candidates are encouraged to apply. Large precast concrete supplier in Massachusetts and New Hampshire, providing high-quality products for over 70 years. Their extensive product range includes septic tanks, manholes, drainage structures, bulkheads, curbing, residential steps, and retaining wall systems, all crafted to precise specifications. They cater to engineers, contractors, and homeowners, emphasizing superior performance and exceptional customer service. The Quality Control Technician (“QC Technician”) will work within the production plant and is ultimately responsible for product testing. The QC Tech will assist in the execution of quality control processes, procedures and protocol associated with the production of pre and post concrete pours. Responsibility Responsible for ACI concrete field tests Responsible for quality control inspections in manufacturing plant Inspect forms before pouring (Pre-Pour). Inspect product after removed from forms (Post-Pour) Notifies Production Supervisor if deficiencies are found. Perform and/or schedule repairs on products as needed. Housekeeping - maintain a clean work area. Including cleanliness within breakroom, restroom, and general facility areas. Expected to maintain knowledge of precast plant techniques and procedures. May assist with precast production operation as needed. Characteristics Always committed to safety. Maintain a safe work area. Follow safe work practices as outlined in the Safety Program. Always committed to quality. Follow and implement quality control measures. Excellent attendance. Reliable means of transportation to and from work. Ability to learn, organize and prioritize work and handle multiple tasks. Outstanding attitude, honesty, and ethic at all times. Expected to use sound judgment, diplomacy, and discretion. Work independently or cooperatively with others. Self-drive in carrying out the functions of the job. Requirements: ACI Concrete Field-Testing Grade 1 Certified (preferred) NPCA PQS Training Must be at least 18 years of age per federal guidelines. Good communication skills, both verbal and written to all levels of staff Ability to remain focused in busy environment. Computers and tablets skills in order to perform tasks. Ability to read blueprints and sketches.

Contract Length: 6 month with potential extension About the Role We are seeking a highly motivated and independent QC Equipment Technician to be the operational and compliance expert for all laboratory equipment within our state-of-the-art biopharmaceutical Quality Control (QC) facilities. This specialized role is critical for ensuring the continuous qualification, calibration, and maintenance of high-precision analytical instrumentation, directly supporting the compliance and integrity of our clinical and commercial testing programs. Key Responsibilities The QC Equipment Technician manages the full lifecycle of laboratory assets and supports the robust quality system that governs their use: Equipment Lifecycle & Maintenance Coordinate and schedule calibration, maintenance, and Installation, Operational, Performance Qualification (IOPQ) activities with Facilities, Metrology, and QC end-users to minimize equipment downtime and address Out of Tolerance (OOT) events immediately. Monitor, coordinate, and communicate equipment lifecycle timelines-from acquisition and induction to qualification, implementation, and decommissioning-utilizing project management tools. Submit asset induction, work, and administrative requests to ensure equipment failures are addressed immediately and data in the Computerized Maintenance Management System (CMMS) is accurate and in the proper state. Serve as the primary QC point person for all equipment inquiries, acting as the liaison between the laboratory team and appropriate external vendors. Ensure all vendor representatives strictly follow site safety and cGMP procedures when working on equipment. Perform minor, non-invasive repairs on high-precision systems like UHPLC (e.g., changing capillaries, flow cells, needles/seats) and execute basic troubleshooting to diagnose complex failures. Quality & Compliance Documentation Support the authoring, review, and maintenance of high-stakes quality system records, including Deviations, Change Controls, and CAPAs (Corrective and Preventive Actions) as required. Author, revise, and maintain Equipment/Instrument Standard Operating Procedures (SOPs). Review preventative maintenance reports, calibration certifications, CMMS records, and perform system inventory audits to ensure compliance. Ensure all equipment documentation meets stringent cGMP, GDP (Good Documentation Practices), and data integrity requirements (ALCOA+) throughout its operational life. Ensure all tasks are performed in compliance with safety and cGMP requirements. Inventory & Logistics Order supplies and maintain inventory for equipment consumables and accessories. Assist with locating and collecting assets due for service and returning them to the laboratory promptly once service is complete. Basic Qualifications Education: Bachelor's degree (BS) in a relevant scientific discipline (e.g., Chemistry, Biology, Engineering, or related field). Experience: Minimum of 5 years of experience in a regulated laboratory setting with a BS degree. OR Minimum of 3+ years of experience in a GMP Quality Control (QC) laboratory setting. Knowledge: Demonstrated aptitude and ability to learn quickly to develop a strong understanding of GxP principles (cGMP, GLP). Skills: Proven expertise in laboratory equipment IOPQ, calibration, maintenance, and troubleshooting. Familiarity with electronic Quality Management Systems (eQMS) and CMMS software.

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: * Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. * Judge as "fit for release" production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. * Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. * Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. * Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. * Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. * Document inspection results. Required Experience: * 1-3 years of production/manufacturing/quality control experience preferred but not required. * High school diploma or equivalent, Associate's or Bachelor's degree a plus * Some background in physical sciences and algebra * Ability to accurately read and enter computer data through a variety of tests * Proficiency in Excel, Word, and other MS Office applications * Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

The Panther Group is looking to hire a Quality Inspector to support production at a leading manufacturer's Franklin, MA facility. The selected candidate will be responsible for the following duties: Self-starter able to work independently Responsible for supporting incoming, in-process, and final inspections - focus on machined and assembled mechanical components Verify product conformance to program specifications, drawings and acceptance tests Capture all inspection data and supplier data packages in ETQ and Deltek Knowledge of test and inspection methodology Able to properly utilize standard inspection tools; calipers, micrometers, height stands, etc Support of QMS, AS9100D and CMMI processes Supports assigned programs in accordance with detailed Quality Plans Assure inspection equipment used is calibrated Assist with cable & circuit board inspection as needed Required Qualifications: Minimum 3 Years experience Experience working on DOD electromechanical products Must be proficient in Microsoft Office applications Possess good technical communications and team building skills Must be able to interface with engineering, manufacturing, program office and configuration management Ability to problem solve and critically think Good trigonometry/geometry math skills Experience with Geometric Dimensioning and Tolerancing (GD&T) IAW ANSI/ASME Y14.5 Preferred Qualifications: Certified to or knowledgeable of IPC-A-610/620 requirements Recent experience working in an AS9100 environment Recent experience operating a CMM Pay Rate: Up to $35.00 per hour DOE #INDENG

Job Title: QA Inspector - Receiving (Contract) Job Type: Full-time Busek Co. Inc. (************** researches, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Job Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. Key Responsibilities: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Qualifications: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal

CITY OF EAST PROVIDENCE EMPLOYMENT OPPORTUNITY - PART TIME MECHANICAL INSPECTOR Division: Building and Zoning $35.00 Per Inspection / No Benefits Up to 19 Hours per week Description: Under the general supervision of the Building Official, Mechanical Inspector performs technical work inspecting mechanical installations for conformity with State regulations and City Ordinances. The Mechanical Inspector performs property inspections, and is responsible for interpretation of codes, regulations and ordinances covering existing and new installations. In carrying out the City's inspection program, the Mechanical Inspector reviews plans, approves or disapproves permit applications, conducts field inspections, makes reports, and may perform duties as the Building Inspector. The Mechanical Inspector takes individual initiative and exercises judgment and discretion within the limits of standard practices and legal requirements. General Responsibilities: Reviews plans, approves or disapproves permit applications, conducts field inspections, and makes reports related to construction projects in the City. Interprets and explains application of codes or provisions of building code to contractors and property owners. Inspects mechanical installations found in building construction for conformity with required codes, regulations, ordinances, standards, and laws. Ensures that work is being performed by personnel with appropriate licenses. Investigates complaints related to violations of mechanical codes. Issues verbal or written orders for correction of defects, workmanship and materials. Prepares reports of all inspections performed, covering conditions discovered, action taken and recommendations for future action. Performs related work as required. Desirable Abilities, Knowledge, and Skills: Ability to read and interpret plans and specifications for mechanical installations, and general building construction. Ability to successfully meet and establish satisfactory work relationships with contractors, property owners and the public. Ability to enforce regulations with firmness, tact and impartiality. Ability to prepare written reports. Thorough knowledge of laws, codes, ordinances and regulations governing mechanical installations and property standards. Through knowledge of the methods, materials and techniques of mechanical and building trades. Considerable knowledge of possible defects and faults in mechanical systems. Considerable knowledge of standard testing devices and effective corrective measures. Ability to detect and locate building mechanical violations. Knowledge of the stages of construction and installation where defects are most usually found and remedied. Knowledge of warm air heating, ventilating and air conditioning systems, steam and hot water heating systems, boiler and pressure vessel maintenance and inspection, mechanical refrigeration, gas, liquid and solid fuel piping and equipment and air pollution control equipment. Ability to draw floor plan sketches and locate exits, windows, sanitary facilities, etc. and ordinances. Ability to use productivity software like Microsoft Word and Excel and industry specific software and applications. Physical Requirements: Ability to work in active construction projects, sometimes in rugged terrain. Ability to lift and carry objects such as surveying equipment. Ability to lift up-to 40 pounds such as removal of manhole covers and catch basin grates. Ability to perform work at a computer workstation in an office setting. Minimum Qualifications: Graduation from a high school, trade school, or an equivalent 5 years' experience as a pipefitter. Possession of a current Rhode Island Pipefitter's Master I, Contractor or Journeymen license. Possession of a Rhode Island Mechanical inspection certification within 6 (six) months of employment. Examination Weight: Oral 100 % Application Process: Apply on the City of East Providence Employment website on ADP Workforce Now. Posted: September 30, 2025

Job DescriptionQuality Inspector: $28/hr - 1st Shift We are seeking a meticulous Quality Inspector with expertise in welding and press brake operations to join our job shop team. This is a challenging and rewarding position where you will play a crucial role in ensuring product quality and contributing to continuous improvement initiatives. Compensation and Benefits Pay Rate: The expected hourly wage is $28/hr. Pay will be offered based on several factors, including the candidate's education, work experience, work location, specific job duties, and certifications. Benefits: We offer comprehensive benefits, which include health insurance and an incentive recognition bonus. (All benefits are based on eligibility). Responsibilities Include: Conduct visual and dimensional inspections of welded components and press brake-formed parts to ensure compliance with engineering drawings, specifications, and quality standards. Document inspection results, deviations, and non-conformances accurately and in a timely manner using inspection reports and quality control records. Maintain comprehensive records of inspections and provide feedback to the production team for continuous improvement. Monitor and evaluate welding processes, including MIG, TIG, and spot welding, for compliance with established procedures and standards. Monitor press brake operations to ensure proper setup and adherence to bending angles and tolerances. Identify and address any issues related to equipment performance or process deviations. Verify the quality of raw materials and welding consumables, ensuring they meet required specifications and standards. Assess the suitability of materials for the intended applications, reporting any issues to the appropriate personnel. Investigate and analyze the root causes of non-conformities and defects, working closely with the production team to implement corrective and preventive actions. Provide guidance and training to production personnel on quality standards, best practices, and quality control procedures. Actively participate in continuous improvement initiatives and collaborate with engineering/production to implement quality enhancements and optimize processes. Ensure that all quality inspections are performed safely and in compliance with company safety protocols. Skills and Qualifications ️ Proven experience as a Quality Assurance Inspector in a job shop environment with welding and press brake operations. Must have Job Shop experience. Strong knowledge of welding processes, including MIG, TIG, and spot welding, as well as press brake forming. Proficiency in reading engineering drawings and blueprints is a must. Excellent attention to detail and strong analytical skills. Strong problem-solving and root cause analysis skills. Knowledge of quality control tools and techniques. Experience using calipers and micrometers is a plus. Ready to Apply? Are you ready to make a difference as a meticulous Quality Assurance Inspector? Join our team and take the first step toward a rewarding future. Apply today! We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Job DescriptionSalary: PURPOSE: Inspects materials to ensure they comply with defined requirements. RESPONSIBILITIES: Ensure that materials entering operations department meet design and customer requirements by inspecting and confirming dimensions, visual/cosmetic attributes, functional requirements, and supporting documentation Compare measurements against established requirements, determine pass/fail, and document any non-conforming material Conduct Coordinate Measuring Machine (CMM) part setup and operation utilizing fixturing and probe calibration Develop inspection methods and set-ups Develop and use Inspection Sampling Plans with assistance of the QA Manager and QA Engineering Originate and maintain all inspection records Originate Nonconformance Reports in the internal system Support MRB (Material Review Board) activities Perform Liquid Penetrant Inspection to verify weld quality and workmanship Perform mechanical calibration of inspection and measurement tools and administers calibration system EDUCATION AND EXPERIENCE: High School Diploma required Associate Degree in related field or certificate from technical school highly preferred. ASQ Certified Inspector preferred 2 years-experience inspecting product in an ISO 9001 manufacturing environment CMM programming software knowledge KNOWLEDGE AND SKILLS: Proficient in the use of inspection and measurement hand tools (calipers, micrometers, height gauge, etc.) Ability to read and decipher blueprint layouts & GD&T Ability to read electrical/mechanical diagrams, spec sheets, and outline drawings Good communication skills, verbal and written Strong organizational skills and the ability to successfully complete multiple tasks within established and changing deadlines WORKING CONDITIONS: Standing 95% Lifting up to 50 lbs. We offer full benefits and competitive compensation. Hourly range: $22.53 - $30.48 depending on experience Benefits: 401(k) with generous match Dental insurance Employee discount Flexible spending account Health insurance Life insurance Paid time off Parental leave Tuition reimbursement Vision insurance Equal Opportunity Employer - Minorities/Women/Veterans/Disabled *This organization participates in E-Verify.*

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries. With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. PAG supports operators in the Airline, Business and General Aviation (BGA), Military and Rotary Wing markets through its Inventory Supported Maintenance, Repair, and Overhaul (ISMRO ) business model. JOB PURPOSE We are seeking motivated candidates for this position which involves receiving, inspecting components for repair and overhaul, generating pre-established technical documentation and shop travelers. Data entry experience is a plus! but not required. JOB DUTIES AND RESPONSIBILITIES Essential Job Functions: • Receiving incoming Components for Repair / Overhaul • Generating documentation, technical data and shop travelers using customer repair orders as guidance. • Perform Visual and Dimensional Inspections using manual inspection tools to determine serviceability • Perform Floor Inspections on various machines / ensuring tolerances are met • Maintain FAA Documentation / Record keeping • Prepare Customer Repair / Overhaul Quotes • Perform Final Inspections / Generate FAA / DOT Documentation • Assist in Maintaining FAA/DOT Quality System WORKING CONDITIONS Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position may require walking primarily on a level surface for periods of time as well as reaching above shoulder heights or below the waist or lifting as required to file documents or store materials throughout the workday Equipment Operated: Ability to operate office machines and equipment and troubleshoot problems with equipment. Work Location: Aviation Welding Technologies, LLC 73 Commerce Drive, Uxbridge, MA Protective Equipment Required: None Potential Hazards: Exposure to materials identified on Material Safety Data Sheets. JOB SPECIFICATIONS Knowledge, Skills and Abilities: Must have a minimum of 5 years' experience. • Must be Highly Motivated individual • Must possess Excellent Organizational and Communication Skills • Must have Data Entry Skills / computer literate • Must be able to read, write and understand English • Must be available to work Fulltime, M-F, Hours ranging from 7am- 5pm • Must pass FAA/DOT Pre-Employment drug test and background screen, also will be subjected to random drug and alcohol testing. Education/Training: Minimum of a H. S. Diploma or GED. Experience: Minimum of 3 years' experience. Certificates/Licenses: None We offer competitive pay and a wide variety of benefits. Full time associates qualify for health benefits the first of the month following 30 days' employment. Options include 4 medical plans, 2 dental plans, vision, base life (company paid), voluntary life, short and long-term disability, flex spending accounts, and telemedicine. Other benefits include vacation and PTO time accrued with each pay cycle with a vacation carryover/payout option at year end, 9 paid holidays, 401k with company match contributions. Qualified candidates with strong drive, work ethic and commitment to quality are invited to apply at www.precisionaviationgroup.com using the Careers tab. EOE/Vets/Disabled

Since 2009, Info Way Solutions has earned a reputation as a full-service staffing firm that excels in a fast-paced marketplace. We have placed highly skilled professionals on a temporary, temporary-to-hire and direct-hire basis in the fields of accounting and finance, IT technology,office administration, marketing and design. Info Way Solutions is dedicated to providing you quality professionals with well-matched skills to your unique hiring requirements and workplace environment. We collaborate with customers to consistently and cost-effectively plan, execute and deliver high-quality services and results.Our consultants are seasoned professionals who build long-term,trusted relationships that bring about a high level of energy, integrity, experience and value to our client's work. Our superior client-consultant relationships and in-depth insight of services have resulted in significant repeated business with clients. In addition, we are partners with best-in-class technology vendors that enable us to best determine the most appropriate hardware, software and services to cater to any of our client's business needs. We have often collaborated with them to make optimal use of today's technology while also planning for the future. More than 50 customers - including mid-market leaders and many of the Fortune 500 Companies - rely on our expertise to leverage their investments. Job Description Responsible for cleaning\decontamination of returned product samples. After processing of samples, responsible for shipping samples to appropriate manufacturing location. Must be able to handle lifting of boxes on a daily basis. Will be responsible for lifting Biohazards shipping boxes with assistance from a second person to be placed on a designated cart; these boxes can weigh upwards of 55 pounds. Analyze samples using specific procedures and instrumentation. Maintain documentation. May provide assistance in troubleshooting results outside of predefined specifications. SUMMARY OF POSITION: The candidate will support the Post Market Vigilance Investigations team's activities for the Patient Monitoring and Recovery (PMR) Division. These activities include; assist in managing the receipt of incoming physical complaint product, conducting follow ups with accounts and/or International Subsidiaries to rectify discrepancies with product receipt, assisting in managing the process flow of complaint investigations, performing Device History Record Reviews, and performing root cause analysis on PMR Product customer returns to ensure high levels of quality, reliability, safety, and efficacy. Additional responsibilities include management of clinically applied medical device retains and associated paper records in accordance with Covidien Medtronic Record Retention Policies and support staffing needs. ESSENTIAL FUNCTIONS: • Assist PMV Investigations Coordinator with managing receipt of physical complaint product samples, in addition to corresponding with domestic and international accounts to rectify discrepancies in product receipt. • Assist in the coordination of sanitization of clinically applied medical device returns and shipment to respective Medtronic Manufacturing facilities, as well as coordinating the investigation process with internal Engineering and Quality groups. • Test and thoroughly evaluate clinically applied surgical medical devices of various degrees of complexity to determine root cause analysis within a closely monitored time frame. • Identifying the appropriate test method/regiment from existing Standard Operating Procedures for complaint sample evaluation, execute the method, and interpret the data (technical) for definitive root cause analysis determination. Test methods may include dimensional and/or tensile testing and interpretation of the technical data yielded in accordance with USP/EP/ASTM standards. • Replicate reported failure mode with bench top or in vivo test methods and document observations accordingly. • Initiate and distribute Corrective Action Requests to Manufacturing or Engineering Departments as needed. • Prepare technical investigation reports based on results of evaluation and/or review of the manufacturing plant reports to be documented in the QA (Quality Assurance) Department complaint database and incorporated into customer response letters. • Certification with OSHA's BloodBorne Pathogens Standard 29 CFR 1910.1030 and adherence to Corporate and Local Environmental Health and Safety Policies. MINIMUM REQUIREMENTS: Minimum Experience: 2 to 3 yrs • Academic or work experience in a laboratory or manufacturing environment. Experience with laboratory equipment or test equipment or manufacturing equipment highly desirable. • Experience with medical devices preferred but not required. Skills/Qualifications: • Must be proficient with MS Office (with emphasis on Excel and Word). • Critical independent thinking and timely follow up. • Time management skills. • Excellent written and verbal skills necessary. QD003425-001, Rev A ORGANIZATIONAL RELATIONSHIPS/SCOPE: • Quality Assurance • Manufacturing • Engineering • Research and Development • Regulatory Affairs • Legal • Marketing/Sales WORKING CONDITIONS: Biohazardous laboratory environment requiring use of personal protective equipment in accordance with CDC and OSHA regulations. Responsible for cleaning\decontamination of returned product samples. After processing of samples, responsible for shipping samples to appropriate manufacturing location. Must be able to handle lifting of boxes on a daily basis, some boxes weigh upwards of 50 pounds each. Must be able to handle lifting of boxes on a daily basis. Will be responsible for lifting Biohazards shipping boxes with assistance from a second person to be placed on a designated cart; these boxes can weigh upwards of 55 pounds. Analyze samples using specific procedures and instrumentation. Maintain documentation. May provide assistance in troubleshooting results outside of predefined specifications. Qualifications Education: BS Degree in a Science or Engineering discipline.

Acute Care Technology At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary In-Process and Final Inspection of all medical device products manufactured and distributed by ZOLL Medical Pawtucket to ensure conformance to specifications. Essential Functions * Performs in-process and final inspection of all product lines and areas for conformance to specifications (inspection procedures and engineering drawings), conducting visual inspection and testing components/assemblies in production. * Verify Calibration status of critical equipment and instrumentation. * Maintains and records quality testing information as part of a DHR (Device History Record). * Initiates DMR's (Discrepant Material Report) for nonconforming material. * Understands and ensures compliance to procedures. * Populate required inspection metric information. * Prepare retain samples for storage. * Completes all tasks within established guidelines. Understands and apply principles of GMP. * Maintains work areas and equipment in a clean and orderly condition and follows prescribed safety regulations. * Must be able to work in a Team environment, multi-task and communicate effectively. Required/Preferred Education and Experience * High School Diploma or equivalent required * 1 - 2 years' experience in related position, or a sufficient combination of the two. required Knowledge, Skills and Abilities * Proficient in the English language (speak, read and write). * Proficient in the use of basic Dimensional Measuring Tools. * Proficient in basic computer skills. * Ability to perform basic math calculations (addition, subtraction, multiplication and division). * Ability to read specifications, procedures, and engineering drawings, basic blueprint reading. * Strong attention to detail ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $22.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

A challenging and exciting career is waiting for you! General Dynamics Electric Boat has a proud history dating back to its incorporation on February 7, 1899, and the delivery of the first practical submarine to the U.S. Navy the following year. During the ensuing century, Electric Boat has been at the forefront of every innovation in submarine technology. Today, we are the nation's premier designer and builder of nuclear submarines. We deliver the advantage that protects our sailors, our families and our freedom! Benefits: Medical, Dental, Vision Prescription Coverage Health and Wellness Programs 401K Commuter/Van Services Paid Vacation and Holidays Paid Training Shift Differential for 2nd and 3rd Shift Professional Development and Advancement Opportunities Learn more at gdeb.com/careers Quality Inspectors perform inspection duties throughout the facility, which includes verifying attributes for welds, structures and components. Candidates will be trained in Quality Control systems, Electric Boat procedures applicable to the work they are performing and Quality Department Instructions. Candidates must work in a collaborative environment to meet all company and organizational goals. All successful candidates will be required to maintain a Magnetic Particle certification. Further opportunity for inspection disciplines such as Liquid Penetrant, Pre-Test, Electrical, Mechanical, etc. may be made available once proficiency has been achieved and maintained in Magnetic Particle. Above all, successful candidates must embody the Electric Boats Core Values, work safely; be responsible for themselves, their peers, the ship and crew who will operate our vessel. This position will need inspectors who perform with integrity and purpose. Our sailors and their families deserve excellence in our workmanship and first time quality. We are the last line of defense for the integrity of our product. This position is located at the Quonset Point facility in North Kingstown, RI Qualifications Required: High School Diploma or equivalent OR 2 plus years of related technical experience Must be able to obtain and maintain an MT, PT, or ET certification Must be able to attain a key department qualification/certification within the first six months after starting as a Quality Inspector Ability to interpret technical manuals, shipyard procedures, test documents, blueprints and diagrams Basic mathematical skills The successful candidate must be able to work all shifts, extended week days and weekends as required Ability to work at heights, tightly confined spaces and in extreme weather conditions Accurate documentation, record keeping and archiving along with verifying previous status of work for completion is a critical job function Possess your own basic hand tools Ability to obtain and maintain a security clearance through the Department of Defense Preferred: Inspection/quality assurance experience Mechanical and Electrical experience Pipe hanger installation experience Structural experience NACE Certified Knowledge of shipboard assemblies, installations, components and structures Metal fabrication experience Military shipbuilding experience Vocational, Technical and Community Colleges or Apprentice programs Related military/Navy experience Skills Basic note taking Adaptability to switch from one job to another as business needs dictate Ability to communicate effectively with their management team and peers Must maintain a positive attitude and proactively attend to issues and concerns Attention to detail must be held at an extremely high level Physical Qualifications Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes Acids or Alkalis, Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Wet We can recommend jobs specifically for you! Click here to get started.

JOIN THE TEAM! Under the supervision of our Operations Director, you will be trained to ensure all company standards are met and maintained at each individual location. We are looking for responsible individuals that: Will be reviewing daily store status reports Documenting and tracking store readiness per the given guidelines. Observing locations using video monitoring systems to ensure and report the given sales process are being followed. The individual must stay up-to date on all current sales promotions and processes. Requirements: High school diploma or general education degree (GED), required Ability to use video monitoring equipment Ability to interpret a variety of instructions furnished in written, oral or schedule form Ability to work on the internet, Spreadsheet, Presentation and Word Processing software Strong written and verbal communication skills Must have the ability to complete required applicable forms in English, which requires the ability to read and write in English. Ability to work well with others in fast paced, dynamic environment. Ability to be respectful, approachable and team oriented while building strong working relationships and a positive work environment. .

Acute Care Technology At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary In-Process and Final Inspection of all medical device products manufactured and distributed by ZOLL Medical Pawtucket to ensure conformance to specifications. Essential Functions Performs in-process and final inspection of all product lines and areas for conformance to specifications (inspection procedures and engineering drawings), conducting visual inspection and testing components/assemblies in production. Verify Calibration status of critical equipment and instrumentation. Maintains and records quality testing information as part of a DHR (Device History Record). Initiates DMR's (Discrepant Material Report) for nonconforming material. Understands and ensures compliance to procedures. Populate required inspection metric information. Prepare retain samples for storage. Completes all tasks within established guidelines. Understands and apply principles of GMP. Maintains work areas and equipment in a clean and orderly condition and follows prescribed safety regulations. Must be able to work in a Team environment, multi-task and communicate effectively. Required/Preferred Education and Experience High School Diploma or equivalent required 1 - 2 years' experience in related position, or a sufficient combination of the two. required Knowledge, Skills and Abilities Proficient in the English language (speak, read and write). Proficient in the use of basic Dimensional Measuring Tools. Proficient in basic computer skills. Ability to perform basic math calculations (addition, subtraction, multiplication and division). Ability to read specifications, procedures, and engineering drawings, basic blueprint reading. Strong attention to detail ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $22.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

Location: 150 Kerry Place, Norwood, MA, 02062 Would you like a new career where you get training and have an opportunity to advance? Do you want to stop working crazy hours and have some flexibility in your schedule? As a Field Manager / Quality Control / Trainer, you are a key team member in upholding our commitment to customer satisfaction and professionalism. With a career at Molly Maid, you will bring customers joy and relief, and reward yourself in the process. Ready to join a company and a team that will support you? Apply today - we're ready for you!Prior customer service, training, cleaning experience or equivalent experience with the ability to learn quickly is a must!This job is right for you if you are self-motivated, energetic, and enjoy helping people. You are driven to provide the highest level of customer service and satisfaction, and able to effectively manage a variety of situations on a day-to-day basis. We'll teach you everything you need to know about what makes Molly Maid unique including our proven cleaning process, highly trained programs, commercial grade equipment and supplies, and our unique culture. Once you've enjoyed training in the Molly Maid process, you'll provide support to the teams that will deliver exceptional service customers. Part-Time. No nights. No weekends. No holidays. Receive a guaranteed minimum wage of $18. 00 per hour, paid weekly. If you delight customers using our proven processes and reach weekly and monthly targets, EARN EVEN MORE with our attractive incentives!We provide:A stable and consistent working schedule Paid training on our proven systems that WOW customers. Come grow with us!A fun culture where success is celebrated as a team. Access to ongoing training. And… a COMPANY CAR during work hours so you don't have to put miles on yours (gas and insurance included) Branded and comfortable clothing Benefits & PayThe pay range for this position is from $18/hr and is dependent on your experience and ability to connect, mastery of our processes and ability to retain and grow both customers and employees with your leadership. As a Field Manager / Quality Control / Trainer, you will be responsible for:• Grow and retain customers and employees - Follow our process and training while being "YOU" and you'll please delight every customer and employee. Do this and we'll celebrate as a team and have fun in the process! • Communicate with customers and employees in a friendly, positive, and professional manner - Our team members love our customers, and you will too. Show them you care about their home, and you'll win. As our brand ambassador in the field, you train cleaning staff on our processes and quality. Coach our staff on quality feedback from customer communications and home visits. Celebrate their good work while connecting with them on how to improve and delight customers every time. • Perform quality checks - Coach our staff on quality feedback from customer communications and home visits. Celebrate their good work while connecting with them on how to improve and grow. Develop relationships to satisfy and retain customers. • Build our culture and team - Interview, hire, and train individuals that build our team's energy and culture. Embrace our culture of teamwork and let your positive attitude energize the team. • Kick off our day! - Connect with the teams and set them up for a successful day. Manage and monitor teams' performance. This job will be a great fit for you if…• You feel energized talking with customers in their home. • You enjoy improving professionally, learning about what makes Molly Maid unique, managing customer expectations and working with our cleaning teams to deliver an experience for our customers that they will recommend to their friends and family. • You take pride in your attention to detail and a job well done. • You like knowing that there's a process for providing great training and follow through. • You want to learn new things and work in a variety of environments while getting to know our customers. • You enjoy leading and training a team. • You enjoy developing relationships and following through on exceptional service. Job Requirements Minimum requirements to be considered for position. • Legally authorized to work in the United States• Are 18 years of age or older• Prior cleaning and supervisory experience or equivalent experience • Complete a background check • Valid Driver's License• You are available to work Monday through Friday, 8am to 2/3pmReady for a fresh start where you can be your best?If that's you, APPLY TODAY! ************ or email mollymaidcanton@mollymaid. com If you meet the requirements for this position, we will schedule you for an interview immediately. "You are applying to work for a franchise owner of Molly Maid. If hired, the franchise owner will be your only employer. Franchise owners are independent business owners who are solely responsible for their own wage and benefit programs that can vary among franchise owners. This job description is meant to describe the general nature and level of work being performed. "

In order to be considered for this role, after clicking "Apply Now" above and being redirected, you must fully complete the application process on the follow-up screen. DEPARTMENT OVERVIEW:The Event Operations Team at the Boston Red Sox is committed to creating a friendly, inclusive, and memorable experience for every fan that comes to an event at Fenway Park. Our team consists of five groups that work as one to ensure our fans have an outstanding time at Fenway Park. Our commitment begins at the gates with our Ticket Takers, a ride on the elevator with our Elevator Operators and the directions given from our Greeters and Ushers to your seats. To close it out, our Quality Control team ensures your experience, wait time for concessions and the cleanliness of Fenway Park is at the highest standard. All of these groups work together to ensure that each fan is taken care of and satisfied with their experience at the park. The Event Operations team conducts periodic evaluations of team members' job performance to ensure alignment with our team's standards. POSITION OVERVIEW Quality Control Staff act as a liaison between all Fenway Park departments (Event Operations, Security, Medical, Fan Services, Aramark, Ticket Office, Facilities, etc.) The Quality Control team is responsible for the pre-game ballpark inspection, as well as in game walkthroughs of Fenway Park. Members of Quality Control operate the Event Operations dispatch radio, log concerns and complaints and connect with other ballpark departments to solve any problems that arise. “Please note that before the start of the 2026 season, you will be responsible for attending and completing our New Hire, All Staff and TEAM Trainings prior to your first day of work. The hourly rate for this role is $16.50. CHARACTERISTICS/QUALIFICATIONS: Must be 18 years of age or older. Ability to work 65+ Red Sox games and 75% of concerts. Must be able to work weekends and holidays. Many of our events occur on weekends so availability on Saturdays/Sundays is Ability to commute to Fenway Park and ability to provide own transportation. Ability to work flexible hours including nights, weekends, and holidays. Ability to access e-mail and enter availability from a smart phone or computer for Red Sox games and concerts. Excellent communication skills and ability to work in a fast-paced environment. Prior customer service experience is preferred, but not essential. Must be able to report to the park 2.5 hours prior to game time (i.e. 7:10p game, staff expected to be here for 4:40p and 1:05p game, staff expected to be here for 10:35a) and staff will work until 30 minutes post-game. Must be able to work in an outdoor environment under various weather conditions. Typical homestands can last anywhere from 7-10 days in a row on average, Event Operations employees will be expected to be on site completing their job for an entirety of their shift. At the Boston Red Sox and Fenway Sports Management, we go beyond embracing diversity. We're committed to living by our values, strengthening our community, and creating a workplace where people genuinely feel like they belong. Too often, job seekers don't apply to positions because they don't meet every qualification. If you love this role and are great at what you do, we encourage you to apply. Your unique skills and experiences might just be what we've been looking for. Prospective employees will receive consideration without discrimination based on race, religious creed, color, sex, age, national origin, handicap, disability, military/veteran status, ancestry, sexual orientation, gender identity/expression or protected genetic information. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, age, disability, gender identity, marital or veteran status, or any other protected class.

DEPARTMENT OVERVIEW:The Event Operations Team at the Boston Red Sox is committed to creating a friendly, inclusive, and memorable experience for every fan that comes to an event at Fenway Park. Our team consists of five groups that work as one to ensure our fans have an outstanding time at Fenway Park. Our commitment begins at the gates with our Ticket Takers, a ride on the elevator with our Elevator Operators and the directions given from our Greeters and Ushers to your seats. To close it out, our Quality Control team ensures your experience, wait time for concessions and the cleanliness of Fenway Park is at the highest standard. All of these groups work together to ensure that each fan is taken care of and satisfied with their experience at the park. The Event Operations team conducts periodic evaluations of team members' job performance to ensure alignment with our team's standards. POSITION OVERVIEW Quality Control Staff act as a liaison between all Fenway Park departments (Event Operations, Security, Medical, Fan Services, Aramark, Ticket Office, Facilities, etc.) The Quality Control team is responsible for the pre-game ballpark inspection, as well as in game walkthroughs of Fenway Park. Members of Quality Control operate the Event Operations dispatch radio, log concerns and complaints and connect with other ballpark departments to solve any problems that arise. Please note that before the start of the 2026 season, you will be responsible for attending and completing our New Hire, All Staff and TEAM Trainings prior to your first day of work. The hourly rate for this role is $16.50. CHARACTERISTICS/QUALIFICATIONS: Must be 18 years of age or older. Ability to work 65+ Red Sox games and 75% of concerts. Must be able to work weekends and holidays. Many of our events occur on weekends so availability on Saturdays/Sundays is Ability to commute to Fenway Park and ability to provide own transportation. Ability to work flexible hours including nights, weekends, and holidays. Ability to access e-mail and enter availability from a smart phone or computer for Red Sox games and concerts. Excellent communication skills and ability to work in a fast-paced environment. Prior customer service experience is preferred, but not essential. Must be able to report to the park 2.5 hours prior to game time (i.e. 7:10p game, staff expected to be here for 4:40p and 1:05p game, staff expected to be here for 10:35a) and staff will work until 30 minutes post-game. Must be able to work in an outdoor environment under various weather conditions. Typical homestands can last anywhere from 7-10 days in a row on average, Event Operations employees will be expected to be on site completing their job for an entirety of their shift. At the Boston Red Sox and Fenway Sports Management, we go beyond embracing diversity. We're committed to living by our values, strengthening our community, and creating a workplace where people genuinely feel like they belong. Too often, job seekers don't apply to positions because they don't meet every qualification. If you love this role and are great at what you do, we encourage you to apply. Your unique skills and experiences might just be what we've been looking for. Prospective employees will receive consideration without discrimination based on race, religious creed, color, sex, age, national origin, handicap, disability, military/veteran status, ancestry, sexual orientation, gender identity/expression or protected genetic information.

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions Responsible for individual Inspection activities Undergo training when necessary Adhere to policies and procedures related to specific customer requirements Ability to understand specific directions and follow guidelines that are common throughout the department Ability to maintain a constant focus on quality and accuracy Ability to work with minimal supervision Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens Obey all safety rules, use caution in work activities, and continuously practice safe behaviors Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred High school diploma or equivalent 1 year of Product Operator experience necessary Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities Understand Quality Management System (QMS) requirements Training on the specific equipment must be fully completed within 90 days of hire Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.