Quality control inspector jobs in New Hampshire - 181 jobs

Second Shift Temp to perm $25 - $35 / hr Description We are seeking a detail-oriented and experienced Quality Inspector to join our team in the plastics industry. As a Quality Inspector, you will be responsible for ensuring that our products meet the highest standards of quality and safety before they are shipped out. Your keen attention to detail and strong problem-solving skills will be crucial in identifying any defects or issues in the manufacturing process. This is an excellent opportunity to contribute to a growing company and make a significant impact in the plastics industry. Responsibilities Conduct thorough inspections of plastic products to ensure they meet quality standards Identify and document any defects or non-conformities in the manufacturing process Implement quality control measures and procedures to improve overall product quality Collaborate with production teams to address quality issues and provide feedback for process improvement Perform random sampling and inspections of raw materials and finished products Review and interpret technical drawings and specifications to ensure compliance Conduct root cause analysis for quality failures and implement corrective actions Maintain accurate records of inspection results and provide detailed reports to management Requirements Proven experience as a Quality Inspector in the plastics industry CMM experience In-depth knowledge of quality control procedures and regulations Familiarity with technical drawings and specifications Strong analytical and problem-solving skills Excellent attention to detail and ability to work independently Proficient in using quality inspection tools and equipment Good communication skills, both verbal and written High school diploma or equivalent; additional certification in quality control is a plus Compensation: $25.00 - $35.00 per hour Our History2006The Bedford NH office opens and Staff Hunters begins working with more and more clients in the greater Manchester marketplace. The personalized approach, consistency and high quality control creates a distinct competitive advantage in a market where fast growth at any cost is the norm. 2008Ari joins the Bedford office of Staff Hunters to focus on building a Senior-level Finance practice in Southern, NH and Northern, MA. 2013Sara opens the Administrative practice in Bedford and makes an immediate impact in the scope and depth of the recruiting and placement in the office. 2015The Bedford office grows and Tony makes plans to transition toward retirement. Raven Ridge is founded and acquires the Bedford location. The office expands and moves to a larger space in Bedford, NH. Payroll and billing operations move to the Bedford office. Growth and change create new business partners and new relationships; both internal and external. 2016A banner year for finding great team members! Dennis joins the Technical / Engineering group, assisting in the growth of the business. Kassey joins the Administrative team offering expertise in the Administrative and Human Resources job market. 2020Ashlee joins the organization to head up administrative operations in charge of payroll and billing.

Job Description Were seeking a Quality Mechanical Inspector to perform detailed, accurate mechanical inspections-including FAIs, Gage R&R, OQ, PQ, and IQ-to strict drawing requirements and established quality standards. This role is highly detail-oriented and requires precision, hands-on metrology experience, and the ability to document results clearly. Youll work with CMM (Hexagon PC-DMIS), optical comparator, OGP, and traditional inspection tools (calipers, micrometers, height gages, pin gages, tool mics), and complete visual inspections to established standards. Key Responsibilities Perform dimensional and visual inspections using CMM, optical comparator, calipers, micrometers, height gages, and other metrology tools. Accurately document inspection results per company inspection procedures (e.g., TechNH standards if applicable). Write basic CMM programs to measure parts for FAIs, CPKs, PQs, OQs, and IQs. Conduct FAIs and Gage R&R, as well as PQ, OQ, and IQ inspections. Utilize standardized CMM fixturing based on part geometry. Interpret ballooned customer drawings with a basic understanding of GD&T. Maintain an accurate library of programs and written setup instructions for all CMM and OGP programs. Qualifications Required: Minimum 1 year experience as a mechanical inspector. Minimum 1 year CMM experience; ability to create basic CMM programs (Hexagon PC-DMIS knowledge required). Proficiency with optical comparators, tool mics, pin gages, and related tools. Basic understanding of GD&T measurements. Proficient in Microsoft Excel and MS Office. Ability to read blueprints, inspection reports, and quality documentation. Strong communication skills; ability to work independently with minimal supervision and collaborate with engineers, shift supervisors, and machine technicians. Demonstrated ability to work effectively in a multi-discipline, collaborative environment. Experience in QMS/Regulatory environments. Preferred: Experience writing basic programs for OGP systems. Familiarity with CPK studies and data reporting. Strong presentation and reporting skills. What Youll Bring High attention to detail and a commitment to accuracy. Ability to take direction well and carry out instructions competently. A team-first mindset and clear, professional communication.

Westaff is hiring Quality Inspectors in Merrimack, NH Benefits to our Westaff Associates: Medical Dental Vision Retirement Savings Plan FREE Online Classes WEEKLY PAY Schedule of the Quality Inspectors: Monday - Friday 3pm - 11pm Summary: The Quality Control Inspector is responsible for inspecting the quality of in-process, final, and incoming materials. Meets all the requirements of a Level 1 with additional experience. Responsibilities of the Quality Inspectors: Perform accurate dimensional and visual inspections of product Collect and accurately document inspection results Maintain collection of samples and document the results Perform inspection of incoming, in-process, and final product Evaluate product in relation to requirements Can “Shadow” new employees and aid in training activities Other duties as assigned Experience of the Quality Inspectors: Must have experience using Calipers, Micrometers, Height Gages, Microscopes, etc. Must be able to read and understand drawings Must have prior Inspector experience Qualifications of the Quality Inspectors: Ability to effectively use MSOffice Software Ability to communicate effectively with all departments Ability to determine tolerances and specifications from printed documents Ability to lift 30 pounds Must be detail oriented Must take direction well and competently carry out instructions Can run programs on Optical Comparator and CMM lean room experience a plus ISO and FDA experience a plus Training Requirements: Good documentation practices Inspection equipment-CMM, Tool Makers Mic IQMS-MRB, Drawings, QMS, Transactions, Scanning product to the next operation Visual Rejections Calibration

Job DescriptionDescription: Haigh-Farr is a premier antenna design, manufacturing and test house developing products used across all platforms in the aerospace industry including missions to Mars, the International Space Station and products fielded to the U.S. Military supporting the warfighter. In our over 50-year history we have enjoyed steady, planned growth. In 2020, Haigh-Farr plans to further grow our team and capabilities to meet increasing demand and to expand into new markets and antenna technologies. Haigh-Farr is seeking a Quality Inspector with a demonstrated background in roles where a high attention to detail was required. The successful candidate will be responsible for performing inspection and test on products at various stages of production to ensure that customer specifications are being met and company quality standards are followed. Requirements: Responsibilities: Inspect inbound parts and materials from vendors and outbound products for shipping Create comprehensive documentation for quality issues and note the corrective actions that were taken Educate others within the department on quality control issues and work with department managers to improve overall company safety and product quality Create process checklists and coordinate quality inspections with department managers Maintain and update quality inspection records Identify, set aside and document all suspect or defective items Knowledge & Skills: Good working knowledge of the AS-9100 Quality Standard Strong attention to detail to ensure that products meet required specifications Able to read engineering drawings Knowledge of geometric dimension and tolerancing a plus Experience with a CMM a plus Experience working in a manufacturing environment Excellent computer skills, proficient in Excel, and Word Independent, self-starter with the ability to multi-task Possess excellent communication skills and positive attitude Qualifications: High school diploma/GED required Proven work experience of 5+ years U.S. citizenship required Ability to possess a security clearance Why should you join Haigh-Farr? Haigh-Farr is a fast paced, growing company that recognizes employees with a promote-from-within philosophy. We believe in a friendly work environment where employee contributions are well received and a key component to our success. Our facility features state of the art technology and the latest manufacturing and testing capabilities. Please see more details about our benefits below. Health Insurance Plan with Health Reimbursement Feature, Dental Insurance and Vision Insurance Flexible Spending Accounts - Health and Dependent Care Company Paid Disability Insurance and Group Term Life Insurance Paid Vacation, Holidays, and Sick Time 401K with Company Match Competitive salary, commensurate with experience and capabilities Company Sponsored Social Events - pizza luncheons, golf outings, food truck BBQ luncheons, Holiday Parties Wellness Prevention - Annual In-House Flu Clinic, Gym Membership discount through Health Insurance Plan

Haigh-Farr is a premier antenna design, manufacturing and test house developing products used across all platforms in the aerospace industry including missions to Mars, the International Space Station and products fielded to the U.S. Military supporting the warfighter. In our over 50-year history we have enjoyed steady, planned growth. In 2020, Haigh-Farr plans to further grow our team and capabilities to meet increasing demand and to expand into new markets and antenna technologies. Haigh-Farr is seeking a Quality Inspector with a demonstrated background in roles where a high attention to detail was required. The successful candidate will be responsible for performing inspection and test on products at various stages of production to ensure that customer specifications are being met and company quality standards are followed. Requirements Responsibilities: Inspect inbound parts and materials from vendors and outbound products for shipping Create comprehensive documentation for quality issues and note the corrective actions that were taken Educate others within the department on quality control issues and work with department managers to improve overall company safety and product quality Create process checklists and coordinate quality inspections with department managers Maintain and update quality inspection records Identify, set aside and document all suspect or defective items Knowledge & Skills: Good working knowledge of the AS-9100 Quality Standard Strong attention to detail to ensure that products meet required specifications Able to read engineering drawings Knowledge of geometric dimension and tolerancing a plus Experience with a CMM a plus Experience working in a manufacturing environment Excellent computer skills, proficient in Excel, and Word Independent, self-starter with the ability to multi-task Possess excellent communication skills and positive attitude Qualifications: High school diploma/GED required Proven work experience of 5+ years U.S. citizenship required Ability to possess a security clearance Why should you join Haigh-Farr? Haigh-Farr is a fast paced, growing company that recognizes employees with a promote-from-within philosophy. We believe in a friendly work environment where employee contributions are well received and a key component to our success. Our facility features state of the art technology and the latest manufacturing and testing capabilities. Please see more details about our benefits below. Health Insurance Plan with Health Reimbursement Feature, Dental Insurance and Vision Insurance Flexible Spending Accounts - Health and Dependent Care Company Paid Disability Insurance and Group Term Life Insurance Paid Vacation, Holidays, and Sick Time 401K with Company Match Competitive salary, commensurate with experience and capabilities Company Sponsored Social Events - pizza luncheons, golf outings, food truck BBQ luncheons, Holiday Parties Wellness Prevention - Annual In-House Flu Clinic, Gym Membership discount through Health Insurance Plan

1. Qualifications: a. High school diploma or GED required b. Minimum 3 years of relevant quality experience, within ISO13485/GMP manufacturing environment preferred, within extrusion is a plus c. Demonstrated efficiency and competency in core and advanced methods and gages for the inspection of tightly toleranced products d. Ability to read and interpret Engineering drawings e. Demonstrate initiative and self-motivation to create efficiencies and improve productivity within the inspection process f. Able to adapt and apply inspection knowledge to an array of product geometries and materials g. Work independently and prioritize assignments h. Will receive ongoing training to support competency and growth within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Organization Able to react and maintain order and focus across shifting priorities and tasks b. Time Management Able to balances multiple responsibilities and create efficiencies within the inspection process and achieve due dates c. Critical Thinking Able to apply and adapt training and experience effectively to assigned tasks; ability to interact with data and identify risk d. Communication Able to contribute across the team and coordinate with and support others to achieve departmental goals e. Mature work ethic professional and positive attitude; provide constructive feedback and ownership to drive improvement within areas of responsibility 3. Reports to: Quality Supervisor 4. Primary job responsibility: The QC Inspector Level 2 is a mid-level position within the QC department for individuals who have demonstrated proficiency in all Level 1 competencies and responsibilities. The Level 2 Inspector utilizes core and advanced inspection methods and gages efficiently to perform inspections of extruded product across a broad range of product geometries and material to determine conformance to defined specifications. This position may include responsibility for an assigned Quality workflow and/or area of focus within an area of demonstrated expertise, efficiency and experience. 5. Essential functions of position: Perform Final Inspection for product Lot Release a. Prepare, follow, perform and document final inspections as defined on inspection paperwork for lot release b. Adapt inspection method techniques to accommodate the inspection of an array of products, including prototypes, profiles, multi-lumen and thin wall extruded tubes c. Demonstrate acceptable measurement error within inspection methods and techniques d. Assess conformance to defined specifications and requirements and identify and document non-conformance reports (NCR) e. Perform boundary inspections and actions as required to contain non-conforming product f. Complete thorough and detailed end-of-shift reporting Perform Start up and In-process inspection of manufacturing extrusion lines a. Prepare, follow and perform start-up and in-process inspections for multiple extrusion lines within a shift for an array of parts with varying degrees of difficulty relating to raw material properties, geometries, tolerances and methods b. React, adjust and communicate appropriately to challenges encountered during the extrusion process c. Identify and document non-conformances to defined specifications and requirements during the extrusion process d. Communicate inspection results and work with extrusion technician or operator to address non-conformances and at-risk product e. Identify, document, and perform boundary inspection to contain at-risk product encountered during the extrusion process Assigned Quality Workflow or Area of Focus a. Support assigned workflow or area of focus with accountability and action b. Create documented procedures and provide training as warranted c. Maintain appropriate documentation and tracking of workflow outcomes and performance as warranted d. Identify under performance and risk within the workflow and action needed to sustain and/or improve workflow outcomes and performance as warranted e. Coordinate and work with others as needed in support of assigned workflow f. Provide and maintain active communication and updates of assigned workflow to Quality Manager and/or Supervisor. Inspection Methods, Gages and Equipment a. Utilize pin gages, ring gages, calipers, rulers, vision systems, and other applicable gages as specified and within scope of training b. Utilize advanced inspection methods including automated OGP routines and advanced vision system techniques such as modeling and construction c. Recognize and respond to basic visual and dimensional quality indicators and erroneous data d. Create efficiencies within the inspection process e. Identify and report equipment and gages outside of calibration dates and exhibiting damage, wear, or malfunctions Documentation and Compliance f. Adhere to Good Documentation Practices (GDP) requirements g. Maintain accurate and complete records in all required documentation h. Follow defined processes and procedures appropriately and effectively identify gaps and/or misalignment with requirements i. Maintain product and lot traceability throughout the workflow and in all inspection documentation Safety and Housekeeping a. Follow all requirements and equipment safety procedures b. Identify and report safety hazards c. Keep work area clean and organized Communication a. Professional and courteous interactions b. Effective use of email and daily reporting to facilitate follow-up and action c. Proactive and constructive communication and support across the team to drive improvement and collaboration 6. Is the work described above checked by another individual? ? YES ? NO 7. Work Environment: a. Dynamic and fast-paced manufacturing floor, prone to interruptions b. Exposure to noise, high temperatures, moving machinery, and high-voltage equipment c. Clean room and gowning requirements * Is the work described above checked by another individual? YES * Consistent motor skills and other requirements of the position: Persistent: Standing: 10% Sitting: 75% Walking: 15% Consistent lifting of up to 35 lbs. Rarely lifting of 1 lb. Frequently Maximum carrying distance of up to 30 ft. Occasionally Reaching must be able to reach machines and/or materials up to 6 ft. from Frequently Kneeling N/A Climbing stairs N/A Repetitive motion right/left hand/wrist Frequently Repetitive motion right/left foot/ankle N/A Continuous arm motions Yes Must be able to avoid potentially moving which could cause injury Yes Must be able to grasp and move object consistently and regularly Yes Vision: intricate nature of work requires of 20/20 with or without corrective lenses Yes Must be able to use gaging equipment and tools Yes Must demonstrate to work productively and efficiently with others Yes Microspec offers competitive wages and benefits, including: Sign-On Bonus Comprehensive Health Insurance Matching 401K plan annually after 1 year Entry-level 2 weeks paid vacation 64 Hours personal/sick time (unused time paid out at the end of the year) Annual discretionary bonus Salary range-$26.50-$28.00 per hour based on experience 20% Second Shift Differential

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Health insurance Resin Systems is a manufacturer of custom thermoset resin castings utilizing epoxy, urethane and silicone materials designed for highly dependable performance in hundreds of demanding applications and environments. Resin Systems creates components for a wide range of industries including Semiconductor, RF Microwave and Medical. Resin Systems Corporation is looking for talented individuals to support our continued growth. We have 1st shift positions available in our QC inspection department. Quality Inspector Responsibilities: - Conduct dimensional inspections on incoming materials, in-process production, and finished products from the various product lines as assigned by supervisor/management. - Use various measuring tools and equipment such as calipers, thread gages, pins and height gages to ensure product specifications are met - Perform visual inspections to identify any cosmetic defects or non-conformities - Perform cosmetic rework on identified minor cosmetic defects - Document and report inspection results and maintain accurate records - Follow established quality control (QC) procedures and guidelines Quality Inspector Skills: - Strong knowledge of quality control principles and practices - Proficiency in using measuring tools and equipment - Attention to detail and ability to identify defects or non-conformities - Excellent analytical and problem-solving skills - Familiarity with QC (Quality Control) processes - Ability to read and interpret technical drawings and specifications - Positive attitude and strong communication skills to collaborate with cross-functional teams - Must be willing to take initiative and be a self-starter Please note that this is not an exhaustive list of responsibilities and skills. Other duties may be assigned as needed by supervisor/management based on business requirements. Job Type: Full-time 8 hour shift Day shift Monday to Friday One location Ability to lift 50 lbs

Trystar is a leader in power distribution equipment and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Based in our Merrimack, NH facility, safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar's team members are our most important asset, and we expect this position to play a critical role in achieving our strategic objectives. We are seeking a Quality Inspector who enjoys working as a member of a team to support, improve & drive elements of our quality management system. This position will report to our Site Manufacturing Leader and will work collaboratively with other parts of the organization and team members to maximize success for Trystar and our customers. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. Job Responsibilities: Demonstrate Trystar's guiding principles and values. Complete first article, in-process, and final inspection of printed circuit boards, custom harnesses, sheet metal, machined parts, completed electromechanical systems, and populated, conformal-coated electronic assemblies. Documenting inspection reports and test records. Resolving non-conforming material internally and with suppliers. Routing product for rework or repair. Maintain the cleanliness of the work area, ensure all equipment is in safe working condition. Perform other duties as required. Job Requirements: Basic Qualifications Minimum 5 years of experience as a Quality Inspector or similar work in electronic high tech, contract manufacturing, or related field. Demonstrate attentiveness to detailed oriented tasks Basic computer skills and competency with Microsoft Office Effective oral and written communication skills Ability to read assembly drawings, electrical schematics, and mechanical blueprints. Ability to identify electronic components. Understanding of PCB assembly techniques including knowledge of hand, surface mount, and through-hole assembly methods Competency in the use of stereo microscope, micrometers, gages, calipers, digital multimeters Understanding of ESD and of how to work within an ESD controlled environment Demonstrate the ability to pay close attention to detail. Ability to work independently as well as in a team environment. Excellent verbal and written communication skills. Must be proficient in reading, speaking and writing in English for the purpose of record keeping, and quality training processes Preferred Qualifications IPC Certification preferred - 600, 610 and/or 620 Strong attention to detail. Ability to multi-task, prioritize, and organize efficiently. Ability to problem solve. Strong communications skills with excellent teamwork skills to resolve issues/concerns. Analytical and computer skills with experience with Epicor ERP / MRP or similar and Microsoft 365. Experience with 5S and Lean principles desired but not required Benefits: 401 (k) with company match Medical Insurance Dental Insurance Vision Insurance Disability Insurance PTO Sick Time Employee Appreciation Time Paid Holidays Trystar is an Equal Opportunity Employer and is committed to creating a diverse and inclusive environment. We consider all applicants for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, marital status, veteran status, or any other characteristic protected by law. We are committed to providing equal opportunities for all individuals and to fostering a workplace that values diversity, equity, and inclusion.

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES * Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. * Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. * Reads and interprets work instructions and to determine dimensions and tolerances. * Reads blueprints or specifications to determine dimensions and tolerances. * Collates test data and drafts quality reports. * May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. * Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. * Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. * May interpret Geometric Dimensioning & Tolerance * Strong attention to detail, organization, and documentation skills. * May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. * Assists in other areas in support of product conformity. * Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. * Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. * Complies with federal and state laws, regulations, specifications and company standards. * Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations.

is responsible for inspection of Printed Circuit Boards in the final stages. Duties/Responsibilities: Visual inspection of printed circuit boards including - backplane, daughter cards, flex circuits, and assemblies. Must be able to use a micrometer, Vernier and pin gauges. Use of Coordinate Measurement Machines (CMM) desired, Micro view. Follow process instructions on work documents such as batch cards, and Inspection Reports. Perform physical measurements such as Bow & Twist, and adhesion testing based on IPC-TM-650. Perform physical and visual inspection of final finishes such as Tin, Gold, Solder, and verify that they meet specifications. Inspection of various product types (flex, rigid-flex, rigid) Work safely to prevent injuries and follows all safety regulations. May be required to cross train in other departments. This position may require overtime for coverage on alternate shifts and weekends. Will be required to perform other duties as requested, directed or assigned. Requirements: High school diploma or general education degree (GED); or one to two years related experience and/or training; or equivalent combination of education and experience. Ability to read blue print /customer drawings. Ability to work with limited supervision. Ability to work standing for extended periods of time and able to lift up to 25 lbs. safely. Understand basic IPC specification and understand military/commercial specs. IPC-A-600 Certification Basic Computer experience - Microsoft Office-Outlook/Word/Excel. 2+ Years PCB experience a plus Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U. S. person as defined in ITAR, 22 CFR 120. 15 (U. S. Citizenship or Resident Alien Status) and defined by 8 U. S. C. 1101(a) (20). Amphenol is a proud Equal Opportunity Employer as to all protected groups, including Individuals with Disabilities and Protected Veterans. For consideration for this position, please apply online to: ********************* acquiretm. com APC859

Looking for a Production Quality Inspector to ensure that products meet established standards and specifications by identifying defects and ensuring compliance with regulations. This role is vital for maintaining product integrity and customer satisfaction. Job Requirements & Essential Functions: Strong attention to detail skills related to product inspection and documentation. Effective communication and ability to communicate cross functionally with all levels. Knowledge of GDP (Good Documentation Practices) Knowledge of visual and mechanical inspection. Knowledge of sampling techniques or equivalent. Ability to interpret inspection procedures, drawings, and instructions Ability to raise issues to supervision/management for resolution. Ability to work under pressure balancing multiple demands Ability to use mechanical equipment that may include but not limited to Optical comparator, CMM, micrometers, pin gages, etc. Self-starter and independent individual with strong organizational, time management and computer skills. Work with the Production department to effectively and efficiently inspect manufactured products. Work with Quality Engineers to collect data and drive nonconformance resolution. Drive containment actions as needed when a non-conforming action has been determined, following all Quality Management System (QMS) requirements. Education & Experience: H.S. Diploma or equivalent Minimum of 3 years' experience as a quality inspector. 5+ years desired. Prior experience in medical device and or electro mechanical assembly required. Prior experience working with an ERP/MRP system (SAP, InforXA, ExactMax, etc.). Prior experience working in an ISO9001, AS9100, or ISO13485 environment Prior experience handling/disposition of non-conforming material a plus.

The Quality Inspector plays a critical role in ensuring that all products meet the company's high standards for quality and precision. This position involves inspecting components and finished products, identifying defects, and ensuring compliance with customer specifications and industry standards. Minimum Qualifications Education: High school diploma or equivalent; technical certification or associate degree in a related field preferred. Experience: 2+ years of experience in a manufacturing or quality inspection role. Knowledge: Familiarity with ISO 9001:2015 and AS9100D requirements preferred Familiarity with either IPC/WHMA-A-620 preferred Familiarity with AS9102 First Article Inspections preferred Skills: Strong understanding of precision measurement tools and techniques. Proficiency in reading and interpreting engineering drawings and blueprints. Excellent attention to detail and organizational skills. Effective communication skills and ability to work collaboratively in a team environment Ability to work in high mix, low volume environment Job Responsibilities Perform detailed inspections of incoming materials, in-process components, and finished products using precision measuring instruments (e.g., calipers, micrometers, tape measures). Interpret engineering drawings, blueprints, and specifications to ensure products meet design requirements. Identify and document non-conforming materials or products and provide feedback to operators. Maintain accurate inspection records Conduct First Article Inspections (FAI) in accordance with company and industry standards. Monitor and enforce compliance with customer workmanship standards. Participate in root cause analysis and recommend solutions to prevent recurring issues. Other duties as required Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. About 603 Manufacturing Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule. 603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

JOB TITLE: Quality Inspector Quality Manager Responsible for the quality of product, product assembly, and packaging in all areas of manufacturing. ESSENTIAL JOB FUNCTIONS: MUST HAVE EXPERIENCE AS A QUALITY INSPECTOR AND MUST HAVE CONSISTENT LONGEVITY IN POSITIONS Perform thorough examinations of all materials and finished products Conduct and report internal audits and evaluations Implement and improve quality control operating procedures Identify and troubleshoot equipment problems and defects Participate in routine visual inspections Maintain a clean and safe environment work Document and record control; Control the non-conformance area (inventory, disposition, and associated costs.) QUALIFICATIONS: Previous work experience in quality control, quality assurance, or other related fields is desirable. Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication skills Proficient with Microsoft Office (Outlook, Excel, Word, Powerpoint); SUPPLEMENTAL JOB FUNCTIONS: Performs additional duties as directed. EDUCATION AND EXPERIENCE REQUIRED: High School education or equivalent

Job DescriptionDescription: Summary Perform visual and dimensional checks on materials, assemblies, tube details, components and finished goods to validate conformance to blue prints and instructions by customers, and to company operating procedures by performing the following duties. Candidates are required to possess a basic understanding of manufacturing and quality processes (Internal Procedures, ISO 9001, etc.). Must be able to use various precision equipment including (but not limited to) Micrometers, Calipers, Fixtures, Thread Gages etc. Basic blueprint reading & specifications/technical data Good mechanical aptitude Basic understating of manufacturing processes (machined components, hose, tube, bending, welding etc.) Ability to use basic hand measuring tools Elementary level shop math Maintains inspection reports/logs as required Meets productivity standards (as defined by management), Maintains and promotes a clean, FOD free, and organized work area Safety-minded and adheres to all company policies and practices safe work habits Has a can-do attitude. Approaches others in a tactful and respectful manner. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Consistently, regularly and predictably at work and on time Other duties may be assigned as needed Competencies To perform the job successfully, an individual should demonstrate the following competencies: Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Works effectively and efficiently to meet productivity standards; Completes work in timely manner; Strives to increase productivity while meeting safety and quality requirements. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. Requirements: Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High School Diploma/Equivalent with at least one year of previous manufacturing/technical experience. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have knowledge of Inventory software and Manufacturing software. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

Job Description Quality InspectorLocation: Hampton, NHAmphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. RESPONSIBILITIES:The Quality Inspector performs incoming, in process, mechanical and final inspection tasks as assigned. The Quality Inspector performs a wide variety of inspection tasks involving a RAM Optical Vision System and associated hand tools recording results against a defined specification. The inspector determined acceptability and recommends disposition of defective items in accordance with the defined procedures. o Incoming Quality Inspection of components, assemblies, and raw materials utilizing RAM Optical Vision System and general hand tools per the specification assigned. o Perform final inspection on outgoing finished goods and prepare documentation when required. o Process non-conformances and help the MRB team to disposition as required. o Organize and document inspection results and non-conformances. o Communicate directly with vendors, engineering, and purchasing to discuss quality related items. o Assist in vendor specific quality metrics and vendor audits when required. SKILLS & QUALIFICATIONS:o The ideal candidate will have two years Inspection experience o Strong GD&T (General Dimension and Tolerances) a plus o Knowledge of general quality techniques, root cause analysis, and sampling plans. o Ability to read specifications, Solid Works familiarity a plus o Knowledge of measurement equipment, RAM Optical, tools, and gauges o Advanced Personal Computer Skills o Strong communication skills both written and oral o A self-starter who uses initiative and problem identification to find solutions. o Ability to lift up to 70 pounds.

EPTAM Precision Plastics is looking for a Class C Quality Inspector - 1st Shift to join our team in Northfield, NH. Join us as we create devices being used in all facets of the medical industry. Our parts are seen in the following areas including; biopharma, molecular diagnostics, robot assisted surgeries, implantable devices, and much more. We look forward to sharing more about how we help the world around us. Since its founding in 1981, EPTAM Precision Plastics , a Northfield, New Hampshire-based company, has been a leader in solving the most difficult challenges in plastic component manufacturing and CNC machining. EPTAM Plastics is the largest North American manufacturer of machined plastic products and assemblies. The professional team comprises over 285 engineers, production specialists, and dedicated quality control experts. The FDA-registered, ISO 13485 center also features comprehensive automated inspection. With 10+ probe and vision coordinate-measuring machines (CMM), EPTAM Plastics can support you with metal-to-plastic conversions, material design support, and design for manufacturability using FMEA practice. EPTAM Plastics is the leader in complex multi-axis plastic machining using 3-, 5-, and 7-axis machine centers, CNC turning, Swiss, milling, routing, sawing, and drilling. We believe that the key to our success is combining world-class machining with our world-class metrology. Partnering those components with our proven processes and exceptional team helps us bring the best to our customers and the world. EPTAM Solutions , our parent Company, with locations nationwide, is at the heart of manufacturing. We recognize our parts touch lives, and our teams assume this responsibility with vigor. Our minds never sleep. Join our incredible team at any one of our locations and reap the benefits of an employee-focused company. We excel at what we do for our customers, our employees, and the world. Benefits Include: Professional Development/On the Job Training Health and Wellness Benefits Clean, Friendly, Safe work Environment Recognition and Rewards Program Tuition Re-imbursement Competitive Pay/Merit Increases 401k w/ Company Match Employee Assistance Program (EAP) SCHEDULE : 1st shift - 7:00AM to 3:30PM (Monday through Friday) POSITION SUMMARY: The Quality Inspector C is primarily responsible for the following: Perform detailed inspection of all mechanical dimensions of parts and maintain documentation. ESSENTIAL FUNCTIONS: Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Perform CMM operations as necessary to meet assigned goals. Ability to interpret reported CMM data, while ensuring the integrity of the recorded information. Perform first piece, in-process, and final inspection for dimensions of parts produced and maintain documentation as required. Keep count of parts and maintain accurate records in ERP, as well as other supporting documentation. Perform routine measurement of components utilizing identified sophisticated equipment, including various hand gages, such as calipers and micrometers. Compare print and customer requirements with parts produced to determine the final quality of the part. Provide accurate and detailed feedback to the operations team. Assist with calibration system maintenance. Assist with equipment calibration as required. * Employees must be able to relate to other people beyond receiving instructions. Can get along with co-workers or peers and respond appropriately to feedback from a supervisor in a professional manner. *Essential function does not apply to all employees with the job title of Quality Inspector C. EDUCATION AND EXPERIENCE: EDUCATION: High School diploma, general education degree (GED) and/or trade school graduate preferred. EXPERIENCE: 1+ year(s) experience in quality inspection, preferably in a manufacturing environment, equivalent combinations of education and experience accepted OR demonstrated ability to execute the Essential Functions for this position. Internships and PT experience acceptable. LICENSES, CERTIFICATIONS AND/ REGISTRATIONS: None B236 ADP1424 2XG-260106-458

Job DescriptionSalary: $20 Westaff is hiring Quality Inspectors in Merrimack, NH Benefits to our Westaff Associates: Medical Dental Vision Retirement Savings Plan FREE Online Classes WEEKLY PAY Schedule of the Quality Inspectors: Monday - Friday 3pm - 11pm Summary: The Quality Control Inspector is responsible for inspecting the quality of in-process, final, and incoming materials. Meets all the requirements of a Level 1 with additional experience. Responsibilities of the Quality Inspectors: Perform accurate dimensional and visual inspections of product Collect and accurately document inspection results Maintain collection of samples and document the results Perform inspection of incoming, in-process, and final product Evaluate product in relation to requirements Can Shadow new employees and aid in training activities Other duties as assigned Experience of the Quality Inspectors: Must have experience using Calipers, Micrometers, Height Gages, Microscopes, etc. Must be able to read and understand drawings Must have prior Inspector experience Qualifications of the Quality Inspectors: Ability to effectively use MSOffice Software Ability to communicate effectively with all departments Ability to determine tolerances and specifications from printed documents Ability to lift 30 pounds Must be detail oriented Must take direction well and competently carry out instructions Can run programs on Optical Comparator and CMM lean room experience a plus ISO and FDA experience a plus Training Requirements: Good documentation practices Inspection equipment-CMM, Tool Makers Mic IQMS-MRB, Drawings, QMS, Transactions, Scanning product to the next operation Visual Rejections Calibration

Job Description Qualifications: a. High school diploma or GED required b. 0-3 years of relevant experience preferred; prior quality experience preferred, within GMP manufacturing environment is a plus Skills d. Familiarity with the fundamental concepts of Engineering drawings, inspection and documentation e. Demonstrate initiative and self-motivation to grow and succeed within the position f. Able to work semi-independently after initial training g. Display aptitude and willingness to learn and accept coaching h. Will receive hands-on training to support competency within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Flexibility - Able to adapt to shifting priorities and tasks b. Time Management - Able to balance multiple responsibilities and complete them efficiently c. Aptitude - Able to apply training effectively to assigned tasks d. Attention to Detail - Able to complete all documentation thoroughly and correctly e. Communication - Able to receive and give feedback and work well with others to achieve shared goals f. Mature work ethic - punctual with demonstrated good attendance record 3. Reports to: Quality Supervisor 4. Primary job responsibility: The QC Inspector Level 1 is an entry-level position within the Quality Control department. This position is focused on developing and applying foundational knowledge and the hands-on skills and competencies necessary for the inspection of extruded components utilized in Medical Devices. The Level 1 Inspector utilizes basic and foundational methods and gages to perform inspections of extruded product to determine conformance to defined specifications, adheres to GDP documentation requirements, and contributes to the daily productivity of the QC Team. This position is performed with guidance and supervision with increasing independence with experience 5. Essential functions of position: Perform Final Inspection for product Lot Release a. Prepare, follow and perform final inspections as defined on inspection paperwork for lot release b. Perform inspections using defined methods, gages and equipment c. Apply and follow ANSI and C = 0 Sampling Plans d. Document inspection results and complete all inspection paperwork as required e. Assess conformance to defined specifications and requirements f. Identify and document non-conformances to defined specifications and requirements g. Recognize, document and escalate quality concerns and issues h. Complete end-of-shift reporting Perform Start up and In-process inspection of manufacturing extrusion lines a. Prepare, follow and perform start-up and in-process inspections as defined on inspection paperwork of high-volume extrusion lines for production parts exhibiting recurring similar and consistent product geometries and materials and inspection methods b. Perform inspections using defined methods, gages and equipment c. Document inspection results and complete all inspection paperwork as required d. Assess conformance to defined specifications and requirements e. Identify and document non-conformances to defined specifications and requirements f. Communicate inspection results to the extrusion technician or operator g. Recognize, document and escalate quality concerns and issues h. Identify, document, and communicate at-risk product to appropriate personnel Inspection Methods, Gages and Equipment a. Utilize pin gages, ring gages, calipers, rulers, vision systems, and other applicable gages as specified and within scope of training b. Recognize and respond to basic visual and dimensional quality indicators and erroneous data c. Create efficiencies within the inspection process d. Identify and report equipment and gages outside of calibration dates and exhibiting damage, wear, or malfunctions Documentation and Compliance e. Adhere to Good Documentation Practices (GDP) requirements f. Maintain accurate and complete records in all required documentation g. Follow defined processes and procedures appropriately and effectively h. Maintain product and lot traceability throughout the workflow and in all inspection documentation Safety and Housekeeping a. Follow all requirements and equipment safety procedures b. Identify and report safety hazards c. Keep work area clean and organized Communication a. Professional and courteous interactions b. Effective use of email and daily reporting Work Environment: a. Dynamic and fast-paced manufacturing floor b. Exposure to noise, high temperatures, moving machinery, and high-voltage equipment c. Clean room and gowning requirements Is the work described above checked by another individual? YES Consistent motor skills and other requirements of the position: Persistent: Standing: 10% Sitting: 75% Walking: 15% Consistent lifting of up to 35 lbs. - Rarely Minimum lifting of 1 lb. - Frequently Maximum carrying distance of up to 30 ft. - Occasionally Reaching - must be able to reach machines and/or materials up to 6 ft. from floor - Frequently Kneeling - N/A Climbing stairs - N/A Repetitive motion - right/left hand/wrist - Frequently Repetitive motion - right/left foot/ankle - N/A Continuous arm motions - Yes Must be able to avoid potentially moving object which could cause injury - Yes Must be able to grasp and move object consistently and regularly - Yes Vision: intricate nature of work requires vision of 20/20 with or without corrective lenses - Yes Must be able to use gaging equipment and tools - Yes Must demonstrate ability to work productively and efficiently with others - Yes Microspec offers competitive wages and benefits including: Sign-On Bonus Comprehensive Health Insurance Matching 401K plan annually after 1 year Entry level 2 weeks paid vacation 64 Hours personal/sick time (unused time paid out at end of year) Annual discretionary bonus Salary range-$23-$26 per hour based on experience 20% Second Shift Differential

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. Reads and interprets work instructions and to determine dimensions and tolerances. Reads blueprints or specifications to determine dimensions and tolerances. Collates test data and drafts quality reports. May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. May interpret Geometric Dimensioning & Tolerance Strong attention to detail, organization, and documentation skills. May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. Assists in other areas in support of product conformity. Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. Complies with federal and state laws, regulations, specifications and company standards. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements QUALIFICATIONS, SKILLS, AND ABILITIES Two-year certification from college or technical school; or ASQ Certified Quality Technician; or 4 years related experience and/or training; or equivalent combination of education and experience. Experience as an inspector or quality technician. Experience working with quality management systems, should know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Comfortable using Microsoft Office (Excel, Word, Outlook, PowerPoint) or similar software. Preference for experience in aerospace, defense, other regulated manufacturing environments; experience working with NAVSEA is highly desirable. BENEFICIAL SKILL OR EXPERIENCE Advanced skills in Word and Excel. Strong technical writing skills: ability to create or update procedures and work instructions. Experience operating and setting up CMM's and Faro arms beneficial but not required. Advanced knowledge of inspection, plating and coating processes, and raw materials a plus. A personal and professional background sufficient to secure Government Security Clearance. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits Paid time off Floating holidays Paid holidays 401(k) 401(k) company matching Dental & Vision insurance (Company paid) Employee assistance program Flexible spending account Competitive health insurance Health savings account Life insurance Referral program