Quality control inspector jobs in New Orleans, LA - 56 jobs

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Join our team as a QUALITY TECHNICIAN and be responsible for ensuring all Reily Foods products meet all our customer and regulatory standards! We're family owned and have a passion for flavor providing iconic coffee and tea beverages that have created memories for over 120 years! Hours: 1st shift 4:30am - 3:00pm Responsibilities: Conduct routine inspections of raw materials, in-process production, and finished goods Perform quality tests and analyses using appropriate tools and equipment Utilize Digital Production System (Redzone) to complete quality compliance documents Monitor and ensure production checks are completed for specified area Collaborate with production team to address quality concerns and implement corrective actions Calibrate and use all quality equipment for specified area Learn and maintain customer standards for product specifications and acceptable quality Assist in cupping and other lab functions Support and comply with good manufacturing practices (GMP's) Other duties as assigned Qualifications High school diploma or GED Machine quality or food production experience preferred Knowledge of GFSI audit schemes, such as BRC and SQF and understanding of legal food safety requirements Technical skills include the ability to calibrate testing equipment, using RedZone manufacturing software, and become certified in Quality areas Interpersonal skills include good verbal and written communication, good time management skills, strong attention to details with ability to follow standardized procedures Leadership skills include a positive attitude, being a team player and self-leadership Benefits include health insurance, 401k, LTD, paid vacation and holidays! Reily Foods Company is an equal opportunity employer, Minorities/Females/Disability/Protected Veteran/Sexual Orientation/Gender Identity.

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. Role overview: To do inspections regarding quality of work that was performed at the site. This is achieved by documenting by visual, hands on or regulatory standarads. Position Responsibilities: Hands on inspection, on the quality of work performed at the site Document any rework that may need to be performed Conduct in-service and final inspection of repair and testing of portable tanks in a production environment Inspect completed preparations of portable tanks for loading Verify all inspections meet or exceed customer and regulatory standards Watch for Safety related issues and report to the Supervisor Direct employees to wear the required PPE Other duties as assigned Qualifications: 2 years working in an industrial setting Knowledge of Tank regulations - Must Have Strong organizational skills Ability to prioritize Possess strong verbal and written communication skills Computer literacy required High School Diploma or GED required LOCATION: Chalmette, LA DCI Benefits: Medical, dental and vision Insurance 401(k) with generous employer match Paid time off, including 10 paid holidays Optional health savings account & flexible spending account Life insurance Employee assistance program Parental leave Referral program Tuition reimbursement

Join our team as a QUALITY TECHNICIAN and be responsible for ensuring all Reily Foods products meet all our customer and regulatory standards! We're family owned and have a passion for flavor providing iconic coffee and tea beverages that have created memories for over 120 years! Hours: 1st shift 4:30am - 3:00pm Responsibilities: Conduct routine inspections of raw materials, in-process production, and finished goods Perform quality tests and analyses using appropriate tools and equipment Utilize Digital Production System (Redzone) to complete quality compliance documents Monitor and ensure production checks are completed for specified area Collaborate with production team to address quality concerns and implement corrective actions Calibrate and use all quality equipment for specified area Learn and maintain customer standards for product specifications and acceptable quality Assist in cupping and other lab functions Support and comply with good manufacturing practices (GMP's) Other duties as assigned * High school diploma or GED * Machine quality or food production experience preferred * Knowledge of GFSI audit schemes, such as BRC and SQF and understanding of legal food safety requirements * Technical skills include the ability to calibrate testing equipment, using RedZone manufacturing software, and become certified in Quality areas * Interpersonal skills include good verbal and written communication, good time management skills, strong attention to details with ability to follow standardized procedures * Leadership skills include a positive attitude, being a team player and self-leadership Benefits include health insurance, 401k, LTD, paid vacation and holidays! Reily Foods Company is an equal opportunity employer, Minorities/Females/Disability/Protected Veteran/Sexual Orientation/Gender Identity.

Job DescriptionDescription: Support Point Eight Power in being an integral part of our clients' value chain by bringing best in class thinking and service to the oil and gas, marine, and energy markets. The Process Control Department is responsible for the integrity of Point Eight Power operations by maintaining and establishing quality standards as governed by policies, procedures, and regulations. The overall objective of this position is to ensure Point Eight Power's manufactured products meet or exceed Point Eight Powers' quality standards and practices. Schedule: Monday to Friday, 6:00 AM to 5:00 PM, with Saturday 6:00 AM to 12:00 PM | OT is required Responsibilities: Inspect, test, or measure materials, products, installations, or work for conformance to client specifications. Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers. Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required. Conduct As-Built Quality Reviews to ensure our products meet or exceed client expectations in terms of quality, uniformity, and reliability upon final inspection. Facilitate the timely and effective resolution of product quality issues by serving as a liaison between the Manufacturing Engineer, Manufacturing Managers and/or Shop Foreman. Ensure Point Eight Power's quality and reputation by coordinating the UL labeling of products and assisting during UL inspections and other third-party inspections. Uphold impeccable quality levels by working closely with the Manufacturing Engineer to continually develop an understanding of Point Eight Power Policies & Procedures and ISO 9001 standards. Engage in systematic listening and responsiveness with partners and key clients by assisting the Manufacturing Engineer in handling complaints in a timely and effective manner. Decrease operational costs and risks by actively assisting in the development and maintenance of policies that enhance process compliance and ensure product quality. Qualifications Education/Certifications High School Diploma or GED, Required. ASQ certification in lean manufacturing, six sigma, preferred ISO Internal Auditor Certifications, preferred Experience 1+ years of experience performing quality control of structural, Electrical assemblies, or Fabrication, Required. Intermediate computer skills, Required. 1+ years of experience applying ISO 9001 Quality Management System requirements, preferred. Must have the ability to travel between all three facilities in Belle Chasse, LA & Bay St. Louis, MS. Required. Knowledge, Skills & Abilities Customer and Personal Service: Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Equipment Maintenance: Knowledge of Point Eight Power products and equipment. Use of tools such as wrench, screwdrivers, ratchets/sockets, tape measures, and torque wrenches. Technical Services: Extensive knowledge of processes related to our products. Safety Compliance: The ability to recognize unsafe work habits. Understanding of OSHA regulations. Verbal & Written Communication Skills: Intermediate skills required. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Math Skills: Intermediate skills required, including ability to calculate figures/discounts, proportions, area, etc. Computers and Electronics: Knowledge of computer hardware and software, including applications and programming such as Microsoft Office Business Suite. Production and Processing: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Quality Control Analysis: Conducting tests and inspections of products, services, or processes to evaluate quality or performance. ISO 9001 Quality Management System: knowledge of ISO 9001 Quality Management System Requirements. Work Environment and Physical Demands This is an FLSA Non-Exempt position and is eligible for overtime pay in accordance with federal and state labor laws. This position is classified as non-exempt based on job duties that do not meet the exemption criteria outlined by the FLSA. The standard workweek is Monday through Friday, 40 hours per week; overtime may be required, including evenings or weekends, based on production demands. Work is performed in a manufacturing plant environment with exposure to moving machinery, dust, and industrial noise Noise levels range from moderate to high; hearing protection may be required in designated areas May be exposed to varying temperatures depending on the season and production processes Personal Protective Equipment (PPE) is required, including safety glasses, steel-toed shoes, gloves, and hearing protection as applicable Must be able to stand and walk for extended periods (up to 8-10 hours per shift) Regularly required to lift and/or move materials up to 50 pounds; team lifts used for heavier loads Frequent bending, stooping, reaching, and twisting to handle materials or access equipment Repetitive hand, wrist, and arm motions may be required depending on the task Frequent use of material handling equipment such as carts, pallet jacks, and forklifts (if certified) Must have the visual acuity to inspect materials and read job orders, labels, and production instructions Requirements:

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job Description Pay DOE- Starting at $16.00 per hour NIGHT: Monday- Thursday; 3:00pm - 1:00am (Fridays, Weekends, & Overtime as needed) Chilly Air Conditioning Weekly Pay Opportunities for Advancement Elmer Chocolate is the oldest family-owned chocolate company in America. Our factory in Ponchatoula is the 2nd-largest manufacturer of Valentine boxed chocolate in North America. • Blue Cross/Blue Shield medical plans for the entire family • Paid vacation • 401k plan • Monthly employee appreciation events • Free chocolate QUALIFICATIONS • Must be 18 years old & pass a drug screen • Must be able to pass an annual background check • High School Diploma or Equivalent • Reliable transportation • Dependable attendance • Ability to read, write, and follow instructions • Ability to work overtime and weekends if needed • Ability to demonstrate basic food quality and safety knowledge (Experience in food manufacturing preferred) • Basic math skills and unit conversions, and the ability to complete and run reports required BASIC RESPONSIBILITIES • Accurate weighing, recording, and labeling work in progress and finished goods, based on sampling schedule • Checking scales and metal detectors for functionality & accuracy • Ensure the safety and cleanliness of lab, materials & equipment • Assist Tank Room Attendant, when needed • Additional tasks assigned by Team Lead, Supervisor or QA Manager • PHYSICAL REQUIREMENTS • Ability to stand & walk for long periods of time • Ability to stoop, bend, reach, use force, carry, push/pull, and lift • Ability to apply manual dexterity and specified visual acuity Elmer Chocolate is committed to providing equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, creed, gender, sexual orientation, gender identity, status as a disabled veteran or other veteran or military status, sex, age, national origin, ancestry, disability, marital status, status with regard to public assistance, or other protected by class status. Job Posted by ApplicantPro

Temp Great Opportunity with a local growing Overview: Kenner, Louisiana: Flexforce Pros is looking to hire a Quality Inspector II for Shift 1 in Department 1461 Quality Test, offering $21.55/hr. This position requires a High School diploma or equivalent, with additional certifications or training in quality control considered a plus. The ideal candidate will have prior experience in industrial manufacturing, with specific skills in reading electrical schematics, and extensive familiarity with testing equipment and measurement tools, including proficiency with a multimeter. Knowledge of both A/C and D/C electricity is essential, as is experience in troubleshooting electrical circuits using schematics and multimeters. The role demands the ability to work both independently and as part of a team, along with strong problem-solving skills and the capacity to perform root cause analysis. Essential Duties: • Read and interpret electrical schematics • Utilize testing equipment and measurement tools effectively, with required experience using a multimeter • Demonstrate knowledge and experience in both A/C and D/C electricity • Troubleshoot electrical circuits using schematics and a multimeter • Work independently and collaboratively within a team environment • Employ problem-solving skills to perform root cause analysis Requirements/Skills: • High School diploma or equivalent • Additional certifications or training in quality control preferred • Previous experience in industrial manufacturing highly desirable • Experience with electrical schematics and troubleshooting • Familiarity with testing equipment and measurement tools, including multimeters • Knowledge and experience in both A/C and D/C electricity • Ability to work independently and in a team • Strong problem-solving skills and ability to perform root cause analysis SHARE Equal Opportunity Statement: FFlexforce Pros is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status

New Orleans, LA: Flexicrew Technical Services (FTS) is seeking a detail-oriented and skilled Quality Control Technician with strong electrical knowledge to join our team. The ideal candidate will have experience in industrial manufacturing, troubleshooting electrical circuits, and use testing equipment to ensure product quality and compliance with standards. Essential Duties: Perform inspections and quality checks on products, components, and systems. Read and interpret electrical schematics to support testing and troubleshooting. Utilize testing equipment and measurement tools, including multimeters, to verify product specifications. Diagnose and troubleshoot A/C and D/C electrical circuits using schematics and testing tools. Conduct root cause analysis and recommend corrective actions to resolve quality issues. Document inspection results, test findings, and corrective actions accurately. Collaborate with production and engineering teams to maintain product standards and resolve issues. Maintain compliance with safety procedures and quality standards. Requirements/Skills: Previous experience in industrial manufacturing highly desirable. Strong knowledge of A/C and D/C electricity. Proficiency with testing equipment, specifically multimeters. Ability to read and interpret electrical schematics. Experience troubleshooting electrical circuits using schematics and test equipment. Strong problem-solving skills with the ability to perform root cause analysis. Ability to work independently and as part of a team. Physical Requirements: Ability to stand and walk for extended periods (8-12 hour shifts). Ability to bend, stoop, reach, and climb as needed to perform job duties. Regularly lift, carry, push, or pull materials and products (up to 50 lbs). Education: High school diploma or equivalent required; additional certifications or training in quality control preferred. Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age,

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements: Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of experience in aircraft maintenance. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Ability to obtain a government flight line driver's license. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Brief Description The Quality Control Inspector is responsible for ensuring compliance with quality standards in the reception, processing, and packaging of meat and marinated products. They will conduct inspections at each stage of production, supervise staff to ensure adherence to procedures, and record results to maintain product traceability. Attention to detail, effective communication skills, and leadership ability are required. Responsibilities Supervision and Quality Control Supervise production staff, ensuring compliance with quality and hygiene procedures. Train employees in good manufacturing practices, food safety, and quality standards. Ensure food safety and sanitation regulations are followed at all stages of meat and marination processing. Monitor the proper handling, storage, and temperature of meat and marinated products. Inspection of Raw Materials and Final Product Verify that meat and marination ingredients meet quality specifications before use in production. Inspect meat cuts for defects, cross-contamination, or irregularities in weight and presentation. Approve or reject in-process and finished products based on established standards. Coordinate with the production team to correct any deviations in real-time. Safety and Hygiene Ensure staff use appropriate protective equipment (gowns, gloves, hairnets, etc.). Supervise the cleaning and sanitization of work areas and equipment before, during, and after production. Guarantee compliance with food safety regulations and USDA guidelines. Documentation and Reporting Record inspection results in quality control logs. Report any non-compliance or findings to supervisors and management for corrective action. Keep sanitation and temperature monitoring records up to date. Record and analyze daily production. Conduct inventories and report shortages as necessary. Equipment Operation and Maintenance Supervise the safe handling of knives, meat saws, and processing machinery. Report equipment malfunctions or maintenance needs for production and/or refrigeration equipment. Other Duties Assist in internal and external quality and food safety audits. Collaborate with other departments to improve efficiency and compliance with standards. Perform other tasks as needed. Physical Requirements Ability to move, lift, and carry products exceeding 50 pounds, with or without assistance. Willingness to work in environments with variable temperatures, including refrigerated and frozen areas, as well as high-temperature production zones. Ability to stand for extended periods, perform repetitive movements such as bending, lifting, and handling heavy products. Possible use of stairs and platforms to access higher storage and production levels.

American Rheinmetall Vehicles, LLC Title: Quality Tech Reports To: Site Quality Manager Department: Quality FLSA Status: Hourly Pay Band/Salary: JOB SUMMARY Assist/support the Quality Engineers by providing production expertise to resolve Quality issues within the production operation. Ensure that the product meets customer's requirements (both internal and external) at each stage of its manufacturing process, carrying out relevant testing and where necessary take corrective action to rectify non-conformance issues. Report quality issues, data, ensuring the Quality Management System is adhered to at all stages. Inspects and tests incoming parts from supply chain companies and internally produced components/vehicles to meet the quality standards and systems required. Essential Functions: Carry out product tests and thorough independent final inspection of finished assemblies to defined procedures, formally reporting all defects Responsible for checking, progressing and collating accurate build and inspection records Provide technical support in the areas of tool/fixture inspection, incoming inspection, and Production line Quality support activities Inspect and auditing of all components and all stages of the manufacturing process Investigate any quality issues to identify root cause and raise appropriate corrective action paperwork and ensure issues are addressed and resolved Ensure compliance and assist with adherence to the Quality Management system (AS9100/ISO9001) Support regular inspection meetings with representatives from appropriate departments to establish an action plan for improving build quality Attend and report at regular improvement meetings, providing secure preventative actions to external and internal quality related concerns Ensure all products flow through the inspection department Ensure all incidents of non-conformance are recorded Maintain the calibration system, ensuring all equipment is correctly calibrated Assist the Quality Engineer with new product introduction Ability to read and understand drawings to ensure build standard control is maintained on assigned projects. Understanding of GD&T. Carry out internal audits as required Undertake special projects as required Contribute to continuous improvement activities Quality control of work by appropriate reviews Support and participate in process improvement activities Write simple reports and provide information to management Achieve goals within budget Plan projects or subtasks so they may be tracked and presented Be aware and work to achieve the Key Performance Indicators (KPIs) Attend various meetings and action/communicate instructions Undertake continuous training and development Participate in root cause analysis and resolving problems Concur with the approach to be taken to assigned tasks Comply with the Health, Safety and Environmental Policies Supervisory Responsibilities: No Supervisory responsibilities Minimum Qualifications: Knowledge, Skills and Abilities (as demonstrated through experience, training and/or testing) Knowledge and experience working with AS9100D/IATF16949/ISO9001 Standards Laser Tracker/CMM experience and ability to program, analyze data, and generate legible inspection reports Ability to read and understand drawings. Working knowledge of GD&T Capable with Microsoft Office tools - Excel, Word, PowerPoint would be advantageous Understand of lean thinking, using lean tools to improve performance Working knowledge of TeamCenter would be advantageous Problem Solving: Uses root cause analysis tools like 8D, 5 Why, etc. Understanding of Continuous Improvement Good communication, teamwork and interpersonal skills Good analytical and problem-solving skills Practical ‘hands on' attitude with the ability to operate independently Must promote collaboration and facilitate teamwork across the organization and its external service providers. Must be tactful, diplomatic, and work with integrity, honesty, and respect for others. Customer Oriented: Must display exceptional listening and analytical skills in order to understand customer concerns and needs with the ability to respond promptly and effectively to those needs. High level of self-motivation and standards with the ability to multi-task; balancing "analysis" with "doing". Must be adaptable and able to prioritize and work under pressure to meet deadlines. Work on own initiative. Preferred Qualifications: Working knowledge of Solumina, Plex and Teamcenter preferred Education: Technical certificate/training is advantageous High school diploma or GED with at least 5 years of relevant experience as a quality technician Experience: 5 or more years of relevant manufacturing experience 5 years relative experience in defense or automotive industry preferred Experience with quality or engineering in a highly regulated industry Background Prerequisites: Must undergo and meet company standards for background check, employment verification, reference checks and controlled substance testing. All employment at AR is contingent upon the ability to obtain and maintain a government security clearance if the position requires it. Working Conditions and Physical Demands: With or without reasonable accommodations, requires the physical and mental capacity to perform effectively all essential functions. In addition to other demands, the demands of the job include: Ability to lift up to 25 pounds occasionally Ability to travel up to 10% of the time. Occasional travel to Europe may be required Ability to stand for long periods Ability to work overtime as needed

Job Title: QA Technician Department: Quality Reports To: QA Manager FLSA Status: Non-Exempt Hours: 10pm - 6am The Quality Assurance Technician serves as support for the Brewing and Packaging departments by testing and analyzing samples from the beginning to the end of the beer production process. The Quality Assurance Technician is responsible for sampling products, conducting laboratory testing, and analyzing data to ensure the product remains in specification. Essential Duties and Responsibilities include but are not limited to: · Packaged product: ensure desired specifications for label adhesion and placement, correct crown color, date coding, fill heights, dissolved oxygen, carbon dioxide, pH, microbiological plating, can seam inspections, and chemical analysis via Anton Paar Analysis System. · Sensory analysis: taste product to ensure product consistently matches the desired flavor profile. Assist in conducting group sensory analysis program. · Wort analysis: ensure consistency between brews by microbiological plating, chemical analysis, international bitterness units, and color. · Fermentation analysis: Take daily samples from fermenting and aging brews to test for temperature, pH and gravities. When applicable prepare samples and test them using Gas Chromatography. · Temperatures & Gravities: Take daily fermentation and again samples from BH tanks, conduct · Bright beer: ensure consistency between brews by tasting, microbiological plating, chemical analysis, international bitterness units, pH and color. · Adhere precisely to QA procedures and specifications. Notify QA Manager of product non-conformance and place product on hold until disposition can be determined. · Maintain sanitation and calibrate laboratory instrumentation. · Collect samples properly for laboratory testing and retention. · Enter data into Excel files and Vicinity software databases accurately. · Utilize excellent multi-tasking and problem-solving skills. · Perform additional duties as assigned by QA Manager. · Comply with Employee Handbook policies and safety requirements. · Correct safety hazards or notify Safety Manager when hazards or unsafe conditions are identified. · Adhere to Brewery GMP practices and HACCP plan. · Ability to work independently with little supervision. · Keep work areas clean and organized by picking up scrap trash/debris and removing all waste from lab daily. Working Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job with or without reasonable accommodations. · Hours may vary if emergencies arise (typical workweek = 40 hours). · Ability to work outside their regular scheduled hours, to be available for emergency and/or prearranged work. · Ability to perform duties involving prolonged standing, sitting, crouching and/or stooping. · Ability to push, pull, and position tools, equipment, and structural material weighing in excess of 65 pounds. · The ability to work near moving parts and machinery. · Ability to work on smooth or uneven surfaces and under varying climatic conditions including exposure to seasonal heat and cold and/or adverse weather conditions · Close vision, distance vision peripheral vision, depth perception, the ability to adjust focus and the ability to see color; either with or without accommodation. Education/Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability required to perform this job effectively. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Degree in Microbiology, Chemistry, Biology or Biochemistry preferred and/or relevant lab experience. · Extensive experience and understanding of aseptic packaging procedures, cleaning and sanitation, preventive maintenance, brewing microbiology and microscopy, record keeping and data analysis. · Knowledge of computers (Word, Excel, Outlook). · Positive attitude with an ongoing sense of urgency. · Ability to understand and execute against deadlines. · Excellent time management skills. · Exceptional written and verbal communication and organizational skills. · Must be at least 21 years of age and eligible to work in the United States. __________________________________________________________________________________________ The Abita Brewing Company reserves the right to revise and alter this job description as needed. ABITA BREWING CO is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

Job Description DIHO Consulting USA is seeking applicants for an entry, mid, or senior level Construction Materials Testing Technician. This position will require testing and inspection of various construction materials including soils, concrete and pile monitoring. The preferred candidate will possess ACI, NICET or TXDOT certifications. Experienced and inexperienced candidates are encouraged. The necessary training will be provided. RESPONSIBILITIES Produce timely and detailed reports Operate vehicle in a safe manner and follow our corporate safety procedures at all time Follow all company's procedures and protocols Cooperate with technical team and share information across the organization Build positive relationships with clients Arrive at the job site to which you are dispatched, on time each day Communicate with dispatch on a daily basis Communicate with onsite clients each day and relay any information to management REQUIREMENTS Must have dependable transportation, a truck is preferable as we have an incentive program to use it for work Must be able to pass a DISA drug screen Must be able to pass TWIC background check Physically capable of lifting heavy materials and equipment Capable of maintaining an "On Call" type schedule and must be willing to work obscure hours

Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. Role overview: To do inspections regarding quality of work that was performed at the site. This is achieved by documenting by visual, hands on or regulatory standarads. Position Responsibilities: Hands on inspection, on the quality of work performed at the site Document any rework that may need to be performed Conduct in-service and final inspection of repair and testing of portable tanks in a production environment Inspect completed preparations of portable tanks for loading Verify all inspections meet or exceed customer and regulatory standards Watch for Safety related issues and report to the Supervisor Direct employees to wear the required PPE Other duties as assigned Qualifications: 2 years working in an industrial setting Knowledge of Tank regulations - Must Have Strong organizational skills Ability to prioritize Possess strong verbal and written communication skills Computer literacy required High School Diploma or GED required LOCATION: Chalmette, LA DCI Benefits: Medical, dental and vision Insurance 401(k) with generous employer match Paid time off, including 10 paid holidays Optional health savings account & flexible spending account Life insurance Employee assistance program Parental leave Referral program Tuition reimbursement

Full-time Description Support Point Eight Power in being an integral part of our clients' value chain by bringing best in class thinking and service to the oil and gas, marine, and energy markets. The Process Control Department is responsible for the integrity of Point Eight Power operations by maintaining and establishing quality standards as governed by policies, procedures, and regulations. The overall objective of this position is to ensure Point Eight Power's manufactured products meet or exceed Point Eight Powers' quality standards and practices. Schedule: Monday to Friday, 6:00 AM to 5:00 PM, with Saturday 6:00 AM to 12:00 PM | OT is required Responsibilities: Inspect, test, or measure materials, products, installations, or work for conformance to client specifications. Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers. Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required. Conduct As-Built Quality Reviews to ensure our products meet or exceed client expectations in terms of quality, uniformity, and reliability upon final inspection. Facilitate the timely and effective resolution of product quality issues by serving as a liaison between the Manufacturing Engineer, Manufacturing Managers and/or Shop Foreman. Ensure Point Eight Power's quality and reputation by coordinating the UL labeling of products and assisting during UL inspections and other third-party inspections. Uphold impeccable quality levels by working closely with the Manufacturing Engineer to continually develop an understanding of Point Eight Power Policies & Procedures and ISO 9001 standards. Engage in systematic listening and responsiveness with partners and key clients by assisting the Manufacturing Engineer in handling complaints in a timely and effective manner. Decrease operational costs and risks by actively assisting in the development and maintenance of policies that enhance process compliance and ensure product quality. Qualifications Education/Certifications High School Diploma or GED, Required. ASQ certification in lean manufacturing, six sigma, preferred ISO Internal Auditor Certifications, preferred Experience 1+ years of experience performing quality control of structural, Electrical assemblies, or Fabrication, Required. Intermediate computer skills, Required. 1+ years of experience applying ISO 9001 Quality Management System requirements, preferred. Must have the ability to travel between all three facilities in Belle Chasse, LA & Bay St. Louis, MS. Required. Knowledge, Skills & Abilities Customer and Personal Service: Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Equipment Maintenance: Knowledge of Point Eight Power products and equipment. Use of tools such as wrench, screwdrivers, ratchets/sockets, tape measures, and torque wrenches. Technical Services: Extensive knowledge of processes related to our products. Safety Compliance: The ability to recognize unsafe work habits. Understanding of OSHA regulations. Verbal & Written Communication Skills: Intermediate skills required. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Math Skills: Intermediate skills required, including ability to calculate figures/discounts, proportions, area, etc. Computers and Electronics: Knowledge of computer hardware and software, including applications and programming such as Microsoft Office Business Suite. Production and Processing: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Quality Control Analysis: Conducting tests and inspections of products, services, or processes to evaluate quality or performance. ISO 9001 Quality Management System: knowledge of ISO 9001 Quality Management System Requirements. Work Environment and Physical Demands This is an FLSA Non-Exempt position and is eligible for overtime pay in accordance with federal and state labor laws. This position is classified as non-exempt based on job duties that do not meet the exemption criteria outlined by the FLSA. The standard workweek is Monday through Friday, 40 hours per week; overtime may be required, including evenings or weekends, based on production demands. Work is performed in a manufacturing plant environment with exposure to moving machinery, dust, and industrial noise Noise levels range from moderate to high; hearing protection may be required in designated areas May be exposed to varying temperatures depending on the season and production processes Personal Protective Equipment (PPE) is required, including safety glasses, steel-toed shoes, gloves, and hearing protection as applicable Must be able to stand and walk for extended periods (up to 8-10 hours per shift) Regularly required to lift and/or move materials up to 50 pounds; team lifts used for heavier loads Frequent bending, stooping, reaching, and twisting to handle materials or access equipment Repetitive hand, wrist, and arm motions may be required depending on the task Frequent use of material handling equipment such as carts, pallet jacks, and forklifts (if certified) Must have the visual acuity to inspect materials and read job orders, labels, and production instructions

Pay DOE- Starting at $16.00 per hour NIGHT: Monday- Thursday; 3:00pm - 1:00am (Fridays, Weekends, & Overtime as needed) Chilly Air Conditioning Weekly Pay Opportunities for Advancement Elmer Chocolate is the oldest family-owned chocolate company in America. Our factory in Ponchatoula is the 2nd-largest manufacturer of Valentine boxed chocolate in North America. * Blue Cross/Blue Shield medical plans for the entire family * Paid vacation * 401k plan * Monthly employee appreciation events * Free chocolate QUALIFICATIONS * Must be 18 years old & pass a drug screen * Must be able to pass an annual background check * High School Diploma or Equivalent * Reliable transportation * Dependable attendance * Ability to read, write, and follow instructions * Ability to work overtime and weekends if needed * Ability to demonstrate basic food quality and safety knowledge (Experience in food manufacturing preferred) * Basic math skills and unit conversions, and the ability to complete and run reports required BASIC RESPONSIBILITIES * Accurate weighing, recording, and labeling work in progress and finished goods, based on sampling schedule * Checking scales and metal detectors for functionality & accuracy * Ensure the safety and cleanliness of lab, materials & equipment * Assist Tank Room Attendant, when needed * Additional tasks assigned by Team Lead, Supervisor or QA Manager * PHYSICAL REQUIREMENTS * Ability to stand & walk for long periods of time * Ability to stoop, bend, reach, use force, carry, push/pull, and lift * Ability to apply manual dexterity and specified visual acuity Elmer Chocolate is committed to providing equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, creed, gender, sexual orientation, gender identity, status as a disabled veteran or other veteran or military status, sex, age, national origin, ancestry, disability, marital status, status with regard to public assistance, or other protected by class status.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of experience in aircraft maintenance. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Ability to obtain a government flight line driver's license. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .