Quality control inspector jobs in Ohio - 695 jobs

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

This position is responsible for ensuring the Bank maintains a sound loan portfolio ensuring compliance with all state and federal laws and regulations and Civista Bank lending policies and procedures. The Analyst will review a variety of new and modified commercial loan types in this role - C&I, CRE, SBA, Participations, Swap, and others. Additionally, the Analyst will review documentation for accuracy, completeness, and compliance in both pre-close and post-close while promoting and maintaining a positive internal and external customer relationship. Key Accountabilities and Expectations: To maintain regular contact and proper escalation with the Commercial Quality Control Supervisor regarding the status of loans in process, audit requests. Reviews complex commercial loan documentation and related supplements to support business partners, ensuring accuracy and adherence with Bank loan policy and guide. Determines document options and presents options to lenders/documentation specialists as applicable. Embraces change and continuous improvement concept, constantly looking to improve both efficiency and effectiveness of the Quality Control team and their processes. Responds to all requests for information and assistance in a prompt, efficient and friendly manner by relaying information as requested, and follows up on all situations that cannot be handled immediately. Resolves complaints in a reasonable timeframe. Maintain a good working knowledge of all Bank policies and procedures and identify deviations from policy, escalating as appropriate to the Commercial Quality Control Supervisor. Develop deep relationships with business partners, including Lenders, Credit Analysts, and Administrative Assistants to ensure optimal efficiency and effectiveness regarding services provided. To provide accurate, efficient, courteous, prompt, and professional telephone service to all customers and potential customers. To research, respond to customer inquiries and resolve customer complaints/issues in a timely and effective manner. To ensure loan documents and files are complete, accurate and in accordance with Bank loan policy. To track all outstanding loan documents/collateral items to ensure Bank's lien position is obtained. To assist with additional loan operation roles, as requested or necessary. Requirements: Qualifications, Knowledge and Skills: 3-5 years of related loan processing experience and/or training; or the equivalent combination of education and experience. Work related experience should consist of Audit, Legal, Compliance, Financial Analysis, Credit Review, or similar fields. Educational experience, through in-house training sessions, formal school or financial industry related curriculum, should be business or financial industry related. Bachelor's degree in accounting, business, finance, or equivalent experience. A significant level of trust and diplomacy is required, in addition to normal courtesy and tact. Work involves extensive personal contact with others and is usually of a sensitive nature. Outside contact becomes important and fostering sound relationships with other entities (customers, vendors, etc.) becomes necessary. Solid working knowledge of banking industry practices relative to bank loan operations with respect to loan products, services, and terminology. Knowledge of commercial, construction, real estate and consumer loan products and processing. Knowledge of related state and federal lending and compliance laws and regulations, and other Bank lending policies. Highly accurate data entry skills and strong level of skill working with a variety of PC and internet applications, including spreadsheets (creating formulas) and the ability to navigate key industry specific Internet sites. Strong multi-tasking, time management, thoroughness, and accuracy skills required. Solid communication and organizational skills with focus on teamwork and cooperation. A high level of confidentiality is required. Ability to work under deadlines with frequent interruption. Physical Requirements: Work involves eye strain due to the constant use of computer screens, reading of reports, and sitting the majority of the day. Work involves being able to concentrate on the matter at hand, under sometimes distracting work conditions. Work involves lifting and moving loan files of up to 20 pounds. EOE - Race/Sex/Disability/Veteran This Position Description is not a complete statement of all duties and responsibilities comprising this position. Nothing in this restricts management's right to assign or reassign duties and responsibilities to this position at any time. Please see job description PI281165844 Job distributed by JobTarget.

Join Us: Finding a better way. At CHA, we believe in the power of clean water, resilient energy, safer roads, and structures that harmoniously blend with their surroundings. We create solutions. We help People. We improve our world. At CHA, we embed ourselves in our communities - and take pride in improving things where we live. At the foundation is a commitment to inclusion and diversity and choosing to treat everyone with dignity and respect. We also take accountability for making decisions that promote sustainability in our business and our designs. We are on a mission to reduce our environmental footprint and bring greener solutions to our clients. We are responsibly creating a more sustainable future in ways that we can all see and touch. Together. Every day. CHA Consulting, Inc. is currently seeking an Ohio Construction Inspection Lead to join our Infrastructure - Construction Inspection Team at our Columbus, OH office. What You'll Do: CHA provides a full complement of construction administration and inspection services to monitor, record and deliver successful projects. Our inspection team includes seasoned certified construction professionals cross-trained in design, risk management, and health and safety compliance to underscore our commitment to stringent standards. Our team understands that small details can have a big impact. The Ohio Construction Inspection Lead is a senior level position that is responsible for overseeing construction inspection activities. They coordinate large construction projects, maintain project documentation and records, as well as oversee construction inspection field staff. The professional in this role will work with the project designer as necessary, chair all project related meetings, and review contractor pay quantities for accuracy. At CHA, you can build a career and find your passion across our diverse business lines and project teams. Being part of CHA means being part of a team of talented professionals, where you'll find support for your career growth and the opportunity to impact our industry and our communities. Find your "why" at CHA! What You Bring: * Bachelor's degree in Engineering is preferred * NICET Level IV certification or PE preferred * Valid Driver's License required * Minimum of 15 years of construction inspection experience is required; experience with Ohio DOT required * Prior management experience preferred * Proficient with Microsoft Office and Excel is preferred * Able to work independently * Good oral and written communication skills * Ability to understand and interpret client's contracts * Excellent knowledge of and reinforces the company's and client's standards * Demonstrates a thorough knowledge about the construction industry * Must be able to navigate through a construction site Salary Range: $53.00 - $65.00 Salary is based on a variety of factors, including, but not limited to, qualifications, experience, education, licenses, specialty, training, and fair market evaluation based on industry standards. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law. #LI-MP1

The Quality Inspector evaluates statistical data to determine and maintain quality and reliability of products on a 2nd shift schedule. What You'll Do: Perform first article inspection which include detailed documentation using customer's forms. Work with minimal supervision using detailed procedures forms and manuals as a guide to job performance. In process auditing that will require the review of operator and process performance working to specifications as referred to in material routings. Use control plans, Material routing instructions, computer print outs, and Pareto charts. Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Records test data, applying statistical quality control procedures. What You'll Need: High school diploma or general education degree (GED) and 5 years related experience and/or training; or equivalent combination of education and experience.

We are currently seeking candidates who are certified Lead Inspectors/Risk Assessors . This position is ideal for individuals with strong organizational skills and excellent verbal and written communication abilities. The Lead Inspector/Risk Assessor will be responsible for conducting inspections following EPA and HUD's Chapter 7: Lead-Based Paint Inspection Standards. Positions available in multiple states. Responsibilities Perform all types of Lead-Based Paint (LBP) inspections: Initial Inspections, Annual Inspections, Re-Inspections, Complaint Inspections, Abatement Inspections. Utilize X-ray fluorescence (XRF) technologies in private and public housing units in accordance with EPA and HUD Chapter 7: Lead-Based Paint Inspection guidelines. Conduct Visual Inspections of paint conditions in buildings. Collect dust and paint samples as required by various regulatory agencies, complete data sheets, and chain of custody forms, and prepare samples for shipment to the laboratory. Ensure accurate documentation of field paperwork. Prepare inspection reports (including diagrams and calibration) in accordance with applicable city, state, and federal regulations, promptly and accurately. Maintain professionalism in both appearance and communication. Maintain a good attendance record, including punctuality to scheduled appointments and in-office meetings. Adhere to company quality assurance and quality control requirements. Perform other related duties as assigned. Requirements 2-5 years experience as a licensed Lead Inspectors/Risk Assessor - with no history of violations/disciplinary actions by any State Licensing Board or Professional Trade Organization Experience operating an XRF instrument (preferably Viken Detection Pb200i Handheld XRF Lead Paint Analyzer) for use in LBP inspections or willingness to learn. Experience with procedures for collecting lead paint chip samples or willingness to learn. Flexibility to various work schedules and situations related to emergency response scenarios. Ability to complete inspections and subsequent paperwork independently, as well as occasionally working onsite and in the office with other team members. Ability to carry and climb ladders and use hand and power tools. Ability to wear a respirator, safety harness, and other safety equipment as needed. Strong commitment to punctuality and reliable attendance. Solid verbal communication skills. Maintain confidentiality regarding all company operations and sensitive information. High school diploma or GED certificate. Ability to travel as needed - Current driver's license. Must be available to drive during all working hours. Dependable transportation and adequate automobile liability insurance on the vehicle used to perform the job. Must pass a motor vehicle records check. Willingness/ability to use hand-held tablets for field inspections. Self-starter and able to work independently. Ability to work simultaneously on multiple projects with tight deadlines. Notes Salary: Negotiable, based on experience - contract/performance based Licensing support available through training programs Standard license fee for Lead Risk Assessor is $250 (can be covered by grant for eligible applicants) Standard license fee for Lead Inspector is $250 (can be covered by grant for eligible applicants) About Us Clarendon is a trusted partner for government compliance and advisory solutions, specializing in HUD-compliant services: HUD RCS, appraisals, brokerage, inspections, facility support and strategic guidance for agencies, housing authorities and property owners nationwide. As a cutting edge firm, we place great value on creative and innovative solutions offered to traditional problems and approaches. We employ a team approach to problem solving that ensures that our clients objectives are always at the forefront and believe our people are our greatest asset. If you possess a desire to enhance your career in commercial real estate and welcome a challenging independent position, consider an opportunity with our firm. Information Guidelines Any information you provide to Clarendon must be complete and accurate. Privacy Statement If you accept an offer of employment with Clarendon, the information provided in your application and/or candidate profile and any other information collected in the course of the application and selection process will be stored in our applicant database. Employment Screening As part of our recruitment process, we conduct background screening checks for candidates applying for roles with Clarendon in accordance with regulatory, local legislative, and geographic requirements. Must be authorized to work full-time in the U.S.A.

OGS Machining is a CNC Job Shop that is currently looking for a full-time Quality Inspector position for 3rd Shift. Standard shop hours are (4) ten-hour days Mon-Thurs. 3:30PM 2:00am, with occasional overtime on Fridays as needed. OGS Machining is a medium-volume, production job shop whose average machining order is 100 - 500 pcs. 75% of our jobs are made from bar stock with the remaining 25% are machining castings or billet. All parts can easily be held in your hand, no cranes or material handling equipment are necessary. The majority of our CNC turning equipment is less than 4 years old, and state-of-the-art. OGS Industries is seeking a Quality Inspector at our OGS Machining location to ensure customer satisfaction through compliance of internal and external customer imposed quality control requirements. Essential Duties Understand and follow OGS quality system requirements. Review and understand customer requirements. Provide documentation and results during Receiving, Layout, In-process, and Final Inspection. Document SPC as needed to support quality efforts. Follow Inspection Plan Documents (IPDs) that provide a basis for making quality decisions in accordance with customer requirements and OGS procedures. Use approved gauging and measurement techniques. Properly use inspection equipment, product inspection techniques, system software, and follow established OGS quality system procedures, and work instructions. Perform calibration activities and maintain calibration system as required. Equipment Used Wide variety of mechanical inspection-type measuring equipment, (i.e., dial/digital micrometers, calipers, height gages, CMM, optical comparator, hardness instruments Skill Requirements High School graduate or equivalent required. A minimum of five (5) years Quality Control/Assurance Inspection experience is required. Helpful if qualified candidate would be able to operate manual CMM and Optical Comparator. Basic understanding of precision machining operations (milling and turning machines). Drawing interpretation including GD&T. Knowledge of non-destructive and destructive testing and measuring techniques. Knowledgeable in the applications and requirements of ISO 9001, AS9100, IATF14949 Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time. OGS Industries is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. NO PHONE OR THIRD PARTY CALLS PLEASE PI090973a7b8e2-31181-39428472

Perform daily incoming/outgoing quality inspections as required by repair procedures. RESPONSIBILITIES Maintain quality inspection and performance documentation Advise repair team of corrective actions to correct repair quality issues Ensure adherence to standards relating to assembly revision levels, repair procedures, and quality standards Ensure proper packaging and shipment of repaired components as required by documented procedures Create and modify repair records as needed Daily computer input into business system, (SAP), of all aspects of the shipping process Perform all work with safety in mind and ensure that all safety measures are met QUALIFICATIONS HS Diploma/GED Two years of experience in shipping and receiving Additional three to five years' experience in assembly Vertiv training on documentation, repair procedures, and quality specifications Working knowledge of Microsoft Office applications and ability to utilize existing business systems such as SAP The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $5 billion in sales, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Build an Aviation Career You're Proud Of Your work ties us all together, helping our team's function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. What you'll do: Ensures the functional and acceptable status of the non-destructive test equipment in accordance with the appropriate company process. Determines the acceptance of parts and components for surface condition in preparation for the non-destructive test process. Performs the specific non-destructive test process as identified in the shop order work instruction. Processes the part(s) in accordance with the appropriate company process. Inspects and interprets the test results. Responsible for reporting on the status and performance of the NDT function to the NDT Manager as applicable. Exercises leadership on NDT related topics, including improvements and Continuous Improvement (CI) projects. Marks all unacceptable discontinuities for location and dimension. Provides technical support to NDT Inspectors Documents the completion and test results of non-destructive test process. Ensures parts are cleaned following completion of NDT process and in acceptable condition for further processing. Performs equipment and material maintenance checks in accordance with the appropriate company process. Maintains records of all maintenance performed on the non-destructive test equipment and materials. Provides instruction and training to NDT inspectors in inspection methods and practices to provide consistent application of best practices. Leads the development and monitoring of NDT related training plans including continual and re-current training Liaisons with engineering, inspection and other personnel as required to assist in researching and solving non-destructive test process problems. Acts as a mentor to NDT personnel and works closely with the Training and Development Specialist where necessary. Maintains personal qualifications as stated in the appropriate company process. Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. As required, may be assigned to perform selected duties of the NDT Inspector to meet operational goals. Carries out other duties as assigned. Position Requirements: Strong planning, organizational, leadership, interpersonal, decision making, oral and written communication skills. Minimum level III in one NDT method Knowledgeable in and understanding of inherent and non-inherent discontinuities found in materials. Knowledgeable in the Workplace Health & Safety requirements. Maintain internal non-destructive test process approval. Ability to read, understand and interpret blueprints Proficient in technical writing. Excellent decision-making skills to ensure compliance to all customer, regulatory and company requirements. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit and stand for prolonged periods. Working knowledge of production management computer system and other related internal control systems. Currently authorized to work in the Unites States without sponsorship.

PRIMARY FUNCTIONS The primary functions include performing visual and dimensional inspection on manufactured products to ensure compliance with customer requirements and print specifications. Scope of duties include routine or repetitive application of standard policies and processes. Inspection and testing for product or production equipment. Supports and creates effective teams, units and environments through a personal commitment to the company's vision and values. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each of the Major Responsibilities, including the following: Requires the ability to learn and meet established department specific work instructions and procedures. Inspects various parts; completed and/or in process products, recording and maintaining quality records, to ensure compliance with all quality requirements. Work demands a high degree of accuracy and close tolerance inspection. May be required to understand and demonstrate proficiency in geometric tolerances and must have basic Math skills. Willingly accepts responsibility of sharing skills and knowledge; trains other employees as needed. Responsibilities include understanding and knowledge of production/manufacturing inspection processes and procedures. Understands and meets quality standards. Seeks to minimize reject rate. Participates in continuous improvement efforts. Supports and helps to implement new ideas. Possesses the ability to use the computer system for basic departmental functions. Ability to understand print specifications including, product specifications, equipment dimensions, etc. Proficient with precision inspection instruments (e.g. micrometers, calipers, laser mic, optical comparator, toolmakers scope, Smart Scope, CMM, etc.) Effectively handles multiple tasks. Works overtime as necessary. Other duties as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Prefer an Associate Degree in a technical discipline; High School diploma, or GED equivalent required. Prefer one year of work related experience. Full Training will be supplied as necessary. LANGUAGE SKILLS: Good communication skills. Ability to read, analyze, and interpret, operating instructions, work instructions, customer supplied procedures, and routers. Ability to read, write, and comprehend simple instructions. Ability to effectively present information in one-on-one and small group situations to other employees of the organization. Effectively gives and receives feedback; willingly asks questions and seeks direction as needed. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit and talk or listen. The employee is frequently required to stand; walk; use hands to handle or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and color vision, depth perception, peripheral vision and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to moving mechanical parts, fumes or airborne particles, heat, and vibration. The noise level in the work environment is variable by department.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Responsibilities: * Working knowledge of statistical data collection Capabilities Studies and Gage R&R's * Work with Product development activities * Project management skills * Advance knowledge of metallurgical equipment * Assist in Development of training programs regarding complex measuring equipment * Create and modify programs for stationary and portable coordinates measuring equipment & related software. * Writing maintaining and troubleshooting gage programs * Participating in projects * Maintaining cleanliness and organization of work areas (5s) * Comply with all applicable occupational Environmental, Health, and Safety standards, as well as Crown's safety rules and regulations for each task performed. To prevent the risk of injury, report unsafe conditions and do not perform unsafe acts. * Other duties as assigned Requirements: * Per 8 hours shift (any combination of standing, sitting and walking ) occasionally bend, squat, climb, reach above shoulder level, kneel, balance and push or pull objects, frequent lifting and carrying (frequently 0- 10 lbs and occasionally 11-50lbs) * Must be able to hear, have good vision, distinguish colors, simple and fine grasping with both hands * Must be able to work in a moderately noisy environment that includes exposure to coolants, lubricants, dust, adhesives, solvents, oils and weld flash. * Inspection equipment and ability to read and understand blueprints; advanced math skills * Communicate (verbal and written) effectively with other people, learn and understand work instructions * Retain knowledge; advance understating of computer work stations. * Completed Level 3 Inspection requirements within Crown's predetermined quality matrix. * 5 years of experience required and/or 2 years associates' degree in Metrology or relative experience. * CMM programming, trouble shooting and operation and weld evaluations Training: * CWI (Certified Weld Inspector) - 120-hrs total classroom training / 3 exams (Hobart Technical Institute / AWS HQ) * Ultrasonic Testing - 96-hrs total classroom training plus 30-consulting-hrs (American Testing Services) * Welding Expert (currently called StructureExpert Weld) - 8-hrs in-house training (Crown) * WiKi-SCAN Portable Laser Weld Inspection - 12-hrs in-house training (Crown) * Magnetic Particle Testing (MT) / Dye Penetrant Inspections - 40-hrs classroom training (Hobart Technical Institute) / 4-hrs in-house MT (Crown) * Microhardness Inspection - 24-hrs classroom training (Leco Corporation) * Spectrometer (Spectrotest) - 12-hrs in-house training (Crown) * Nikon Vision Measuring System - 48-hrs [(2) 24-hr sessions] classroom training (Nikon Incorporated) Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Lima Nearest Secondary Market: Findlay Job Segment: Welding Inspector, Testing, Welding, Warehouse, Forklift, Manufacturing, Technology

BWXT traces its history back to the 1850s with the invention of the water tube boiler. Operating for many years as a part of The Babcock & Wilcox Company, our company has long been at the forefront of the commercial nuclear power generation and government nuclear industries, achieving an impressive number of firsts in both businesses. In 2015, The Babcock & Wilcox Company spun off its power generation business to allow BWXT to focus on government and nuclear operations. Job Description BWX Technologies Inc. is looking for the ideal candidate to fulfill the role of Technologist 4 as part of their Nuclear Equipment Manufacturing organization. This role functions out of a regional group to manage, verify effectiveness and continuously improve the NDE training, qualification and oversight program. Additional duties include providing technical counsel and supporting sites and their suppliers in order to ensure the highest level of reliability and compliance. The position may develop and administer training and testing programs related to both commercial and military non-destructive testing specifications relative to the following methods: Radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. Qualifications Qualifications in at least four (4) of the following methods: radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. In addition, the demonstration of proficient knowledge in NAVSEA 250-1500-1, MIL-STD-2132 and ASME Section III through previous work experience is a preferred. Experience as a Level III or Examiner is preferred. The candidate must be currently certified or be capable of attaining certification within 6 months in at least four (4) of the methods listed above in accordance with NAVSEA 250-1500-1 and SNT-TC-1A. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description We are seeking an experienced Senior Quality Inspector to join our aerospace manufacturing team. This role is responsible for performing detailed incoming, in-process, and final inspections to ensure components and assemblies meet the highest industry standards. The ideal candidate has extensive experience working with extremely tight tolerances (as low as 0.0002”) and will play a key role in ensuring compliance with customer, company, and regulatory requirements. Key Responsibilities: Perform incoming, in-process, and final inspections of aerospace components and assemblies. Verify parts and assemblies against engineering drawings, specifications, and customer requirements with tolerances down to 0.0002” (2/10,000). Use a wide range of precision measuring instruments (micrometers, calipers, CMM, height gauges, optical comparators, etc.). Document and report inspection results, including nonconformances, in accordance with AS9100/ISO 9001 quality standards. Support root cause analysis and corrective/preventive action (RCCA/CAPA) activities. Assist with First Article Inspections (FAIs) in compliance with AS9102 requirements. Work closely with production, engineering, and quality teams to resolve quality issues. Mentor and provide guidance to junior inspectors and production staff on inspection best practices. Requirements: 5+ years of experience in quality inspection within the aerospace or precision manufacturing industry. Proven ability to work with tight tolerances (2/10,000”) and complex precision parts. Proficiency with precision measuring tools and equipment; CMM experience preferred. Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) and ability to interpret complex aerospace blueprints. Experience with FAIs (AS9102), inspection reports, and nonconformance documentation. Familiarity with AS9100 and ISO 9001 standards. Strong computer skills for inspection documentation and reporting (ERP/MRP/QMS experience a plus). Excellent attention to detail, analytical skills, and problem-solving ability. Must successfully pass a pre-employment eye exam to verify visual acuity required for precision inspection. Preferred Qualifications: Prior experience in a lead or senior inspector role. Knowledge of special processes (plating, coating, heat treat, etc.) inspection. Experience supporting customer audits and regulatory compliance.

BWXT traces its history back to the 1850s with the invention of the water tube boiler. Operating for many years as a part of The Babcock & Wilcox Company, our company has long been at the forefront of the commercial nuclear power generation and government nuclear industries, achieving an impressive number of firsts in both businesses. In 2015, The Babcock & Wilcox Company spun off its power generation business to allow BWXT to focus on government and nuclear operations. Job Description BWX Technologies Inc. is looking for the ideal candidate to fulfill the role of Technologist 4 as part of their Nuclear Equipment Manufacturing organization. This role functions out of a regional group to manage, verify effectiveness and continuously improve the NDE training, qualification and oversight program. Additional duties include providing technical counsel and supporting sites and their suppliers in order to ensure the highest level of reliability and compliance. The position may develop and administer training and testing programs related to both commercial and military non-destructive testing specifications relative to the following methods: Radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. Qualifications Qualifications in at least four (4) of the following methods: radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. In addition, the demonstration of proficient knowledge in NAVSEA 250-1500-1, MIL-STD-2132 and ASME Section III through previous work experience is a preferred. Experience as a Level III or Examiner is preferred. The candidate must be currently certified or be capable of attaining certification within 6 months in at least four (4) of the methods listed above in accordance with NAVSEA 250-1500-1 and SNT-TC-1A. Additional Information All your information will be kept confidential according to EEO guidelines.

At Centrus Energy, quality is mission-critical-and as our Lead Inspector, you'll be the guardian of excellence. This role blends technical mastery, leadership, and training into one powerful position that ensures our inspection professionals are certified, confident, and compliant. If you thrive on precision, teaching others, and working at the intersection of nuclear quality and hands-on inspection, this is your moment to shine. What You Will Do: You will lead and deliver inspector training and certification programs, serve as a Level III Nondestructive Testing (NDT) Inspector, and ensure all inspection activities meet SNT-TC-1A, QAPD, NRC, and DOE requirements. You'll develop and approve inspection procedures, perform and oversee complex inspections, manage qualifications and certifications, evaluate nonconformances, and verify corrective actions. You'll audit internal and third-party NDT programs, interface directly with regulators, guide engineering teams on inspection methods, and ensure all inspection equipment is properly calibrated and maintained-keeping safety, quality, and compliance at the forefront of every operation. We'd Love to Hear From People With: Associate degree in a related technical field or equivalent quality experience 6+ years of progressive NDT experience in an industrial or nuclear environment Experience in quality control for design and construction and knowledge of field construction activities SNT-TC-1A certifications in Leak Testing (LT), Visual Testing (VT), and Ultrasonic Thickness (UT) AWS Certified Weld Inspector (CWI) Proficiency with Microsoft Word, Excel, PowerPoint, Access, and Adobe for documentation and reporting Must possess or have the ability to obtain and maintain a “Q” Clearance A Successful Candidate Brings: Prior experience at an NRC-regulated site Bachelor's degree in Science or a technical discipline ASQ certifications or additional quality credentials Deep working knowledge of NQA-1, DOE O 414.1D, and nuclear quality programs Military inspection or quality experience Currently holding an active Q-level security clearance In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. This position will require a pre -employment background check and a pre-employment drug test. Centrus Energy and all subsidiaries shall abide by the applicable legal requirements. We prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. This position requires the successful candidate to obtain and maintain a Q security clearance. Candidates for positions requiring a security clearance are required to be tested for the absence of any illegal drug as defined in 10 CFR 707.4 prior to an offer of employment being made. In addition, once employe, employees will become part of a random drug testing program and may also be tested in the event of any incident causing injury or causing damage to property, or if it is determined that there is a reasonable suspicion the employee is under the influence of drugs or alcohol. This position will require preemployment background check on the part of the Company and in order to receive a Q security clearance, a background investigation by the Federal government. Subsequent Federal government reinvestigations may be required. Centrus Energy Corp. is an Equal Opportunity Employer.

At Centrus Energy, quality is mission-critical-and as our Lead Inspector, you'll be the guardian of excellence. This role blends technical mastery, leadership, and training into one powerful position that ensures our inspection professionals are certified, confident, and compliant. If you thrive on precision, teaching others, and working at the intersection of nuclear quality and hands-on inspection, this is your moment to shine. What You Will Do: You will lead and deliver inspector training and certification programs, serve as a Level III Nondestructive Testing (NDT) Inspector, and ensure all inspection activities meet SNT-TC-1A, QAPD, NRC, and DOE requirements. You'll develop and approve inspection procedures, perform and oversee complex inspections, manage qualifications and certifications, evaluate nonconformances, and verify corrective actions. You'll audit internal and third-party NDT programs, interface directly with regulators, guide engineering teams on inspection methods, and ensure all inspection equipment is properly calibrated and maintained-keeping safety, quality, and compliance at the forefront of every operation. We'd Love to Hear From People With: * Associate degree in a related technical field or equivalent quality experience * 6+ years of progressive NDT experience in an industrial or nuclear environment * Experience in quality control for design and construction and knowledge of field construction activities * SNT-TC-1A certifications in Leak Testing (LT), Visual Testing (VT), and Ultrasonic Thickness (UT) * AWS Certified Weld Inspector (CWI) * Proficiency with Microsoft Word, Excel, PowerPoint, Access, and Adobe for documentation and reporting * Must possess or have the ability to obtain and maintain a "Q" Clearance A Successful Candidate Brings: * Prior experience at an NRC-regulated site * Bachelor's degree in Science or a technical discipline * ASQ certifications or additional quality credentials * Deep working knowledge of NQA-1, DOE O 414.1D, and nuclear quality programs * Military inspection or quality experience * Currently holding an active Q-level security clearance In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. This position will require a pre-employment background check and a pre-employment drug test. Centrus Energy and all subsidiaries shall abide by the applicable legal requirements. We prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. This position requires the successful candidate to obtain and maintain a Q security clearance. Candidates for positions requiring a security clearance are required to be tested for the absence of any illegal drug as defined in 10 CFR 707.4 prior to an offer of employment being made. In addition, once employe, employees will become part of a random drug testing program and may also be tested in the event of any incident causing injury or causing damage to property, or if it is determined that there is a reasonable suspicion the employee is under the influence of drugs or alcohol. This position will require preemployment background check on the part of the Company and in order to receive a Q security clearance, a background investigation by the Federal government. Subsequent Federal government reinvestigations may be required. Centrus Energy Corp. is an Equal Opportunity Employer.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an entry-level Petroleum Inspector to join our Caleb Brett team in Cincinnati, OH. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award- winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible performing the necessary volume measurements, temperature measurements, sampling, calculations, documentation and reporting which ensures that the customer receives an independent, accurate and complete assessment of quantity and quality of material. This position will travel at least 75% of the time. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skillset, experience, qualifications, and other job-related duties. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures Able to perform by specified methodology the below duties in addition to completing the associated paperwork Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships Perform routine equipment calibrations, verification and function checks Verify and communicate the results obtained and to make the entries into the appropriate media Provide on the job assistance and receive training from more experienced inspectors To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator To perform routine equipment calibration, verification and function checks To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner To maintain work areas, records and equipment in a clean, organized and functional condition To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information Model Intertek's 10X Energies at all times within the workplace, practicing business the right way Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work Minimum Requirements and Qualifications Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Ability to climb ladders and stairs for shore tanks Valid driver's license and reliable driving record (required) Must have or be able to obtain a Transportation Worker Identification Credential (TWIC) Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management Ability to communicate and interact effectively in verbal, written and presentation skills Ability to travel as business needs dictate - up to 75% of the time Physical Requirements: Physical requirements to include lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving Ability to climb ladders and stairs for shore tanks Preferred Requirements and Qualifications: Previous experience performing petroleum inspections is preferred TIC certified is a plus

Full-time Description At Performance Kings Honda, we don't just play in the automotive industry-we own the game. With six President's Awards and four Master's Circle Awards, we don't meet standards-we set them. Our drive for perfection, fierce loyalty to our clients, and hunger to stay on top put us far ahead of the competition. If you want true excellence, there's only one choice: Performance Kings Honda. We are seeking passionate individuals to join our team as Honda Sales Professionals. Whether you have automotive sales experience or are eager to represent one of the world's most trusted brands, we want to hear from you. You'll connect with customers, showcase Honda's award-winning lineup, and help them find the perfect vehicle. Compensation: $70,000.00 - $130,000.00 Annually (Experience-based) $3000.00 Guarantee for 30 Days of Training! Potential Quarterly Cash Bonus Earnings! Work Schedule: Flexible Work Schedules Include Days, Evenings, and Weekends Alternating Sundays What We Offer: Paid PTO time off 401k retirement plans with generous company match Medical insurance HSA and FSA plans Dental care Vision coverage Short- and long-term disability Life insurance Critical illness insurance Hospital indemnity insurance Accident insurance Grief counseling Living will preparation Generous employee discounts on vehicles, parts, and services Why Choose a Career at Performance Kings Honda? Available bonus pay opportunities to maximize your earnings. Sales training and certification programs provided at no cost to you Advancement reward top performers Largest volume of inventory in the Cincinnati area. Requirements Responsibilities: Show vehicles to guests, using your product knowledge and presentation skills. Answer calls, set up appointments, and help customers with their purchases. Reply quickly to online questions from customers. Gather customer information for your manager, following company guidelines. Explain any service needs and provide support after the sale. Help customers with their purchases and explain financing or leasing options. Follow up with interested buyers and invite them to visit the dealership. Qualifications: High school diploma/GED required. Basic computer literacy is required. Strong organizational and time-management skills. Ability to work collaboratively and demonstrate self-motivation. Willingness to pursue ongoing training and sales skill development. Valid driver's license and a driving record that permits operation of customer and company vehicles. Performance Kings Honda maintains a drug-free workplace. Thank you for your interest in joining Performance Kings Honda. We look forward to reviewing your application and learning more about you. Salary Description $70,000.00 to $130,000.00 Annually

About Us: Westrafo America is the first US based facility specializing in the design and manufacturing of high-quality transformers. We are committed to excellence and are looking to expand our team with dedicated professionals who share our passion for electrical engineering and manufacturing. Position Overview: We are seeking a detail-oriented Quality Control Inspector to join our team. The ideal candidate will be responsible for ensuring that our transformers meet the highest quality standards and comply with industry regulations. This role is critical to maintaining our reputation for quality and reliability as we scale our operations. Key Responsibilities: Conduct inspections of raw materials, in-process components, and finished products to ensure compliance with specifications and standards. Develop and implement quality control procedures and guidelines. Perform testing and analysis on transformers to identify defects or areas for improvement. Document inspection results and maintain accurate records of quality metrics. Collaborate with production teams to address quality issues and implement corrective actions. Conduct root cause analysis for quality defects and develop strategies for prevention. Ensure compliance with safety and regulatory standards in all quality control processes. Participate in continuous improvement initiatives to enhance product quality and operational efficiency. Qualifications: High school diploma or equivalent; associate or bachelor's degree in engineering or a related field preferred. Previous experience in quality control or manufacturing, preferably in the electrical or transformer industry. Knowledge of quality control standards and methodologies (e.g., ISO 9001). Strong attention to detail and analytical skills. Proficient in using measurement tools and equipment (calipers, micrometers, etc.). Excellent communication and teamwork skills. Ability to work independently and manage multiple tasks effectively. Benefits: Competitive salary and performance-based bonuses. Health, dental, and vision insurance. Retirement savings plan. Opportunities for professional development and career advancement. A dynamic and innovative work environment.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. **Job Posting External** **Responsibilities:** + Working knowledge of statistical data collection Capabilities Studies and Gage R&R's + Work with Product development activities + Project management skills + Advance knowledge of metallurgical equipment + Assist in Development of training programs regarding complex measuring equipment + Create and modify programs for stationary and portable coordinates measuring equipment & related software. + Writing maintaining and troubleshooting gage programs + Participating in projects + Maintaining cleanliness and organization of work areas (5s) + Comply with all applicable occupational Environmental, Health, and Safety standards, as well as Crown's safety rules and regulations for each task performed. To prevent the risk of injury, report unsafe conditions and do not perform unsafe acts. + Other duties as assigned **Requirements:** + Per 8 hours shift (any combination of standing, sitting and walking ) occasionally bend, squat, climb, reach above shoulder level, kneel, balance and push or pull objects, frequent lifting and carrying (frequently 0- 10 lbs and occasionally 11-50lbs) + Must be able to hear, have good vision, distinguish colors, simple and fine grasping with both hands + Must be able to work in a moderately noisy environment that includes exposure to coolants, lubricants, dust, adhesives, solvents, oils and weld flash. + Inspection equipment and ability to read and understand blueprints; advanced math skills + Communicate (verbal and written) effectively with other people, learn and understand work instructions + Retain knowledge; advance understating of computer work stations. + Completed Level 3 Inspection requirements within Crown's predetermined quality matrix. + 5 years of experience required and/or 2 years associates' degree in Metrology or relative experience. + CMM programming, trouble shooting and operation and weld evaluations **Training:** + CWI (Certified Weld Inspector) - 120-hrs total classroom training / 3 exams (Hobart Technical Institute / AWS HQ) + Ultrasonic Testing - 96-hrs total classroom training plus 30-consulting-hrs (American Testing Services) + Welding Expert (currently called StructureExpert Weld) - 8-hrs in-house training (Crown) + WiKi-SCAN Portable Laser Weld Inspection - 12-hrs in-house training (Crown) + Magnetic Particle Testing (MT) / Dye Penetrant Inspections - 40-hrs classroom training (Hobart Technical Institute) / 4-hrs in-house MT (Crown) + Microhardness Inspection - 24-hrs classroom training (Leco Corporation) + Spectrometer (Spectrotest) - 12-hrs in-house training (Crown) + Nikon Vision Measuring System - 48-hrs [(2) 24-hr sessions] classroom training (Nikon Incorporated) **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities