Quality control inspector jobs in Palm Beach Gardens, FL - 126 jobs

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

Requirements Required Skills & Qualifications Ability to understand, speak, read and write English Self-starter and/or team player with strong verbal, written, and communication skills. Courteous professional manner when interacting with all employees. Solid technology skills with ability to utilize and learn various types of technology. Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy Efficient and high standards of accuracy and organization in performing tasks Strong decision making skills and ability to prioritize work; effective time management skills Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency Proficient in Microsoft Office, including Word, Excel, internet and email Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. High School Diploma or equivalent 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: Medical Dental Vision Life and AD&D Policies Short and Long-Term Disability 401K with Company Match Paid Time Off Paid Volunteer Time Off Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

Immediately Hiring: Quality Control Inspector (Manufacturing / First Shift) Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Shift: 1st Shift, 6 or 7am start time, Monday - Friday Hours: Full-Time, 40 hours a week. Direct Hire, Competitive Pay, Great Benefits, Work-Life Balance Position Overview: Dayton-Granger, Inc. is seeking a skilled Quality Control Inspector to join our aerospace manufacturing team in Fort Lauderdale, FL. In this role, you'll perform inspections on in-process and finished assemblies, sub-assemblies, and components to ensure they meet rigorous quality standards. Using precision tools such as calipers, micrometers, and height gauges, you'll verify critical dimensions, review blueprints and engineering changes, and maintain accurate inspection records. Your attention to detail will directly contribute to the production of advanced avionics products for commercial, general aviation, and military programs. As a key member of our growing team, you'll enjoy the stability of a company with over 82 years of proven success, a collaborative environment where your expertise is valued, and clear opportunities for long-term career growth in aerospace. Located just four miles from Fort Lauderdale's sunny beaches, DG offers competitive pay, excellent benefits, and a supportive culture where we work together as one crew. Key Responsibilities: Inspects in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards. Performs tasks from blueprints, engineering change notices, or established operating procedures. Determines acceptance, rejection, or rework requirements of unit. Prepares and maintains inspection reports and records. Performs additional tasks assigned by management Follows all DG safety procedures as per company policies and per the Facility Engineer/Safety Director Required Qualifications: High School Diploma or GED Minimum of one (1) year of experience as a Quality Inspector in a manufacturing environment within a highly regulated industry (e.g., aerospace, defense, automotive, medical devices, etc.). Hands-on experience with precision inspection tools, including calipers, micrometers, height gauges, and other measuring Instruments Familiarity with ERP systems Basic computer proficiency (Microsoft Word, Excel, Outlook, and other relevant software Strong verbal and written communication skills in English Ability to lift, push, and pull up to 25 lbs Visual requirements include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Why You'll Love Working Here: We are a multi-generational team with members representing a diversity of cultures, educational backgrounds, experience levels and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a long-standing supplier providing cutting edge products in support of long term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs and up and coming markets. Additionally, DG loves its employees! The average employee tenure is around 8 years. Length of service milestones are celebrated company-wide and employees may make selections of anniversary gifts. Benefits Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match. Paid Time Off (PTO) and paid holidays. Mental health benefits. Complimentary life insurance with the option for supplemental coverage. Paid parental leave Short-term and long-term disability coverage. Excellent work-life balance. Tuition reimbursement. Dynamic and collaborative work environment. On-site gym. Access to advanced technology and resources. Length of service/milestone anniversary gifts. Team-building activities. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This position requires use of or access to information subject to the Export Administration Regulations (“EAR') or the International Traffic in Arms Regulations (“ITAR'). Accordingly, all applicants must be U.S. persons within the meaning of these regulations. Under ITAR, a U.S. person is defined as a U.S. Citizen, U.S. Permanent Resident, or a person who is a protected individual under the Immigration and Naturalization Act (8 U.S.C. 1324b(a)(3)).

QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**

Job DescriptionDescription: Whether you are just starting in your career or are an experienced Call Center Representative, Schumacher Auto Group is the place for you! We have a hands-on management team to help you grow & succeed all while earning the pay you deserve. Keep reading to see how you can join our team at Schumacher Auto Group today! The Customer Quality Department Operator is responsible for handling incoming calls from potential and existing customers, providing information about vehicles, scheduling service appointments, answering questions about financing, and generally promoting the dealership's products and services through phone interactions, aiming to drive sales and customer satisfaction. Essential Job Responsibilities Handles incoming calls for all departments of all Schumacher dealerships. Answers all calls professionally. Transfers to correct departments. Takes messages as necessary and promptly emails internal employees as needed. Answers clients questions such as directions, days/hours of dealerships and other. Attends brand webinars and trainings, staying abreast of current state of automotive industry standards and strategies. Sits and actively answers calls for long periods of time. Other duties as assigned by supervisor. Job Requirements High School diploma or equivalent. Experience providing quality customer service. Ability to read and comprehend written instructions and information in English. Able to work independently and manage time efficiently. Excellent communicator to support relationships with all employees, clients, visitors. Schumacher Auto provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. About Schumacher Automotive Group Schumacher Auto Group is an industry-leading Car Dealership Company with award-winning car brands in the West Palm Beach area, and exceptional team members. We have a strong focus on putting our customers and community first in everything we do. Requirements:

Job Title Inspector, Quality Take off with Daher! Are you motivated by the idea of joining this division of excellence? Do you want to participate in its transformation and growth in Stuart, FL? Join Daher to work in a motivating environment and share our pride in designing and manufacturing exceptional products! Daher is an aircraft manufacturer and an industry and service equipment supplier. Daher asserts its leadership in three main businesses: aircraft manufacturing, aerospace equipment and systems, logistics and supply chain services. With the stability provided by its family ownership, Daher has been committed to innovation since its creation in 1863. Today, present in 13 countries, Daher is a leader in Industry 4.0, designing and developing value-added solutions for its industrial partners. Daher is a story of people with a passion for what they do and complete control over their own futures. Now it's your turn to write your own story. Daher offers a full benefit package including Medical, Dental, Vision, 401(k), Life insurance, Short- and Long-Term Disability, Paid Time Off, and Paid Holidays. Come Fly with Us! Job description Job Duties Inspects Assemblies/detail parts for compliance to applicable drawings, specifications, and contractual requirements Documents discrepancies per applicable procedures Works from engineering drawings, blueprints, quality procedures and instructions, manufacturing specifications and procedures, operation and work sheets, electronic data and verbal instructions Uses precision measuring instruments in performing assigned quality tasks Maintains necessary documentation and records Monitors and implement adherence to all safety and department procedures, practices and directives Other related duties as assigned Qualifications Accredited HS Diploma or GED and 0 to 1 year of inspection experience in the manufacturing of aerospace components/assemblies Ability to effectively interact/communicate with all disciplines Working knowledge of Boeing Specifications & Blueprints preferred Preferred candidate will have working knowledge of the Manufacturing Execution System (MES) Able to understand shop mathematics to interpret engineering drawings, manufacturing specifications, and Inspection procedures. Ability to use inspection tools such as, scales, thickness gauges, micrometers, calipers, go no-go gauges, dial indicators, and split ball gauges Willing to work any shift Ability to read and speak English proficiently required in order to perform the job Excellent organization skills Excellent attention to details Must be a Team player Join Daher to... Integrate a family group with a long-term vision Make a difference in a developing company Develop new skills thanks to the diversity of your missions Take part in a human and industrial adventure full of challenges Innovate and think outside the box by integrating a stimulating environment Profile and other information related to the position The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Have full range of motion to perform the job functions. Maintain steady hand-eye coordination. Reach in all directions and in potentially awkward positions. All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage, or any other protected classification, in accordance with applicable federal, state, and local laws. By completing an application with Daher, you are seeking to join a team of hardworking professionals dedicated to consistently delivering outstanding service to our customers and contributing to the financial success of the organization, its clients, and its employees. Equal access to programs, services, and employment is available to all qualified persons. Those applicants requiring accommodation to complete the application and/or interview process should contact an HR representative. Daher complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Working hours Full time Salary 40705.6USD Region Florida Location Stuart Experience Languages English Creative and entrepreneur, develop your career at the heart of the biggest industrial challenges with Daher!

Full-time Description Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs. Salary Description Hourly, Non-Exempt

Job DescriptionDescription:Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements:What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs.

The CMM Quality Inspector is responsible for setting up, inspecting and signing off on aerospace components utilizing CMM (Coordinate Measuring Machines) and bench plate equipment. Parts will be inspected to engineering drawings, customer purchase orders, industry standards and specifications. Role requires the ability to obtain a Secret clearance. This is a first shift / hourly / non-exempt position reporting to the Quality Manager. Primary Duties & Responsibilities: Operate CMM machine using established programs, as well as creating new programs using Calypso software. Perform dimensional inspection on product using CMM, calipers, micrometers and height gauges. Perform visual and dimensional inspection on product per procedures. Perform first piece inspection and in-process inspections. Maintain lot integrity. Ensure all First Article Inspection (FAI) packages are properly completed. Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment. Must participate in required training, medical monitoring, safety, and health evaluations and programs. Other duties as assigned. Knowledge and Skills: Strong background concerning the usage and care of precision measuring tools and equipment. Ability to effectively read and understand blueprints, engineering documents, purchase orders, inspection manuals and procedures. Strong metrology, blueprint reading, and GD&T interpretation skills. Must be familiar with AS9102 Form and First Article Inspection (FAI). Must have practical experience performing in-process and final inspections. Demonstrates an understanding of related aerospace ISO and AS requirements. Must have experience using various mechanical inspection tools, such as micrometers and calipers. Maintain accuracy and attention to detail at all times and complete tasks in a timely manner. Knowledge of dimensional, visual and mechanical inspection processes. Ability to work with mathematical concepts. Proficiency using Microsoft Word and Excel. Able to apply common sense understanding to carry out work instructions furnished in written, oral or diagram form. Deal with issues involving several concrete variables in standardized situations. Ability to work with little supervision and make intuitive decisions when general instruction is given. Ability to work effectively with others in a team environment. Verbal and written communication skills (in English) Required to twist, turn, kneel, stoop, bend, and use hands to handle or feel. Close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Capable of lifting/moving 35 pounds Experience and Education: U.S. Person status required GED or High School diploma required Machinist certificate is a plus Minimum of 3 years of CMM inspection experience in an aerospace manufacturing environment Location Profile: Located in Port Saint Lucie, Florida, Atlantic Precision Inc (API) is a premier Aerospace Machining & Build facility with a talented work force using the latest 3D printing metal and additive manufacturing technologies in its 50,000 square-foot facility. With decades of experience, API is trusted by OEMs in commercial aviation, military aviation, power generation and the marine industry to produce quality parts for both prototypes and production requirements.

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. **If you are a current associate of Primo Brands, please apply** **here** Compensation: $23.50 Location: Ft Lauderdale, FL Shift: Friday- Monday 1:00pm- 9:30pm **_Shift differential: 6%-8% of base hourly rate paid for applicable hours worked_** Responsibilities + This position is responsible for quality control testing of raw source water, water processing and finished bottled water products to ensure regulatory compliance with the applicable Food and Drug Administration (FDA), State, Local, International Bottled Water Association (IBWA), and Primo Water North America (PWNA) bottled water and beverage safety and quality standards. + Perform microbiological and wet chemistry testing on source water, process and finished product samples in accordance with Standard Methods and PWNA requirements (standard operating procedures and policies). + Maintain detailed and accurate documentation of all analyses and inspections concerning incoming raw materials, water processing treatment equipment and production processes. + Monitor and maintain manufacturing plant quality assurance programs to ensure adherence to established FDA, State, local, IBWA and PWNA standards. + Contribute as a member of the Food Safety team to ensure compliance with all applicable bottled water and beverage safety and quality standards. + Work with production and maintenance departments on various projects as necessary and appropriate. + Assist with cleaning and sanitization (Clean-In-Place (CIP) duties for the water processing equipment and production areas as necessary and appropriate, according to regulatory standards. + Manage multiple tasks and priorities while maintaining detailed and accurate records, quality and safety standards. + Understand and use water processing and mineral batching computer controls to effectively changeover production lines for different bottled water type production runs ensuring all quality control testing is within Primo Water North America specification (s). + Maintain an organized and clean work environment. + Perform other tasks as directed. Qualifications + Microbiology, Food Science, Biology, Chemistry or related field experience. + Excellent analytical and problem-solving skills with strong written and oral communication skills. + Ability to make quality decisions independently and works well with limited supervision, both individually and as a team. + Understanding Food Safety principles and Current Good Manufacturing Practices (cGMP). + Understanding of Good Laboratory Practices (GLPs) and aseptic sampling and handling techniques to collect samples for microbiological analysis including: E. coli, Total Coliform and Heterotrophic Plate count (HPC). + Ability to pass the International Bottled Water Association (IBWA) Certified Plant Operator (CPO) exam and maintain the certification. + Ability to become a Preventive Controls Qualified Individual (PCQI) as part of the FDA Food Safety Modernization Act (FSMA) requirements. + Ability to become a Safe Quality Food (SQF) Practitioner (Only required in MV & CAN). + Ability to support regulatory and internal audits. + Ability to stoop, bend, lift and twist on a regular basis. + Ability to work overtime as needed. + Ability to stand for long periods of time. + Ability to repeatedly lift 50 pounds. + Working knowledge of MS Word, Excel and PowerPoint. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Salary Range Disclaimer: The salary range provided for this position is an approximation based on market research, internal compensation data and the candidate's qualifications and experience. Final salary offers are determined through a comprehensive evaluation of candidate qualifications and may vary depending on factors such as skills, experience, and geographic location of the position. Other components of the compensation package, including benefits and bonuses, will also be considered. We are committed to fair and equitable compensation practices, and we encourage open dialogue about compensation during the interview process. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Job Summary of the R&O Quality Inspector The R&O Quality Inspector is responsible for the Quality Control of the repairs within the 145-repair station. Must adhere to the Repair Station Quality Control Manual (RSQCM), Component Maintenance Manuals (CMM), and all 14 CFR Aviation Regulations. Duties/Responsibilities of the R&O Quality Inspector Train, direct, and assist all inspection personnel performing work under the repair station certificate as directed by the Accountable Manager. Ensure the proficiency of every inspector by completing the Inspector Proficiency Checklist Form RSF-211-01. Ensure all incoming, hidden damage, preliminary, in-process, and final inspections are performed following the procedures outlined in the manual. Respond to any request for inspection of this repair station certificate. Determine the final disposition of articles failing to meet the incoming inspection review as directed by the Accountable Manager. Ensure appropriate calibrations and checks are made on the tools and equipment used by the repair station as described in the manual. Red-tag or placard any malfunctioning or non-functioning equipment. Assist Field & Tech Services with aviation technical questions. Additional duties as assigned Note: This description is an outline of the major recurring responsibilities of the job. It is not intended to be all-inclusive of the work to be performed. Other related job objectives, special assignments, and less significant responsibilities typically performed by the incumbent are not included. Required skills/abilities of the R&O Quality Inspector Read and understand drawings, manuals (CMMs), work instructions, and schematics. Use industry-standard electronics bench test equipment, i.e., Spectrum Analyzer, O-scope, multi-meter, and power supplies. Ability to read, write, and speak English. Proficient with a PC and Microsoft Office products (Excel, Word, Outlook) Computer and website navigation skills are required. Strong Customer service and communication skills Phone skills are required, as well as organizational skills Knowledge, Education, and Experience of the R&O Quality Inspector 3+ years of experience working with a QMS 3+ years of experience in electronics installation and repair Experience dealing with Aviation OEMs is a plus

Forgen is dedicated to building a better future - for generations. The Quality Control Technician conducts daily inspections to ensure compliance with company and customer quality standards. They possess the authority to enforce corrective actions for any deficiencies in work, equipment, or materials. Their duties encompass maintaining quality assurance protocols, conducting material testing, and analyzing test results. They execute quality assessments, perform inspections, calibrate equipment, and communicate findings. Furthermore, they manage project document control, prepare submissions meeting project specifications, and interpret plans to ensure project compliance. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities Inspecting the work in progress to assure compliance with the quality control plan and quality criteria as specified in the Contract Documents. Performing quality control sampling and testing during construction or ensuring that outside companies are performing tests according to the specifications. Verifying that the equipment used in testing meets test requirements, that tests are conducted according to procedures and best management practices, and that testing equipment and procedures remain consistent over the duration of the project. Identifying work that does not meet acceptance criteria, documenting defective work, and reporting to the QC Manager. Administering the Inspection Test Plans (ITP). Completing the daily field logs. Taking daily field photographs. Maintaining quality control document files. Inspect all delivered materials to document there are no defects in workmanship, they have the proper identification, are not damaged and delivery is complete. Visual inspection will also include the correct quantity, completeness evidence of compliance with approvals, and proper documentation in accordance with manufacturer's requirements and the contract documents. Monitor delivery, handling, and storage of materials per specifications. Observe that storage facilities are applicable, protective, and secure to prevent damage or contamination to equipment and materials per specifications. Review and maintain any manufacturer material certifications. Pertinent information will be entered, and any non-conformances identified during material inspections will be recorded on a Material Delivery Receipt. Basic Qualifications Degree in an engineering discipline (civil, mechanical, electrical, structural), preferred. Knowledge of mathematics - arithmetic, geometry, calculus, and statistics and their relevant applications. Computer skills especially in the use of Microsoft Word and PowerPoint and the ability to manage files and records effectively. Valid Driver's License and ability to drive on behalf of company business. Preferred Qualifications The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary. 40-Hour HAZWOPER Training 8-Hour OSHA Refresher. Competent Person Safety Training. 30-Hour OSHA Construction Safety Training. EM 385-1-1 Training Physical Demands & Work Environment This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk. Perks and Benefits Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards. Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact *************. California Privacy Policy Agency Policy

Job Description Job Title: Quality Regulatory Technician - Labeling Compliance Department: Quality Assurance / Regulatory Affairs Employment Type: Monday - Friday 8:30am - 5pm $19 - $22/ HR We are seeking a detail-oriented Quality Regulatory Technician to join our Quality Assurance team, specializing in labeling compliance. This role ensures that all product labels and packaging meet internal standards and adhere to local, state, federal, and international regulatory requirements. The ideal candidate is highly organized, collaborative, and experienced in dietary supplement labeling and packaging. MUST BE BILINGUAL ENGLISH/SPANISH. Key Responsibilities Apply style guidelines and branding standards to new and revised product labels. Ensure compliance of all labeling with applicable local, state, and federal regulations. Create and revise label items in the company's document control system; draft and release engineering change orders. Support continuous improvement initiatives within the Labeling department. Provide daily regulatory support for labeling strategies and operations across multiple projects. Interpret and apply regulatory guidance to labeling within the dietary supplement industry for domestic and international markets. Collaborate cross-functionally with teams including Engineering, Marketing, Quality, and R&D to support label and packaging updates and new product development. Interface with distributors and stakeholders to resolve labeling/packaging issues. Oversee the development and review of advertising and promotional materials for regulatory compliance. Conduct proofreading and side-by-side reviews of primary and secondary labels, including multilingual inserts, for final artwork approval. Manage and track labeling/packaging timelines and documentation for regulatory submissions and audits. Communicate regulatory updates and interpret compliance directives for internal teams, offering solutions and guidance. Provide support to Regulatory and Design teams and assist with additional regulatory duties as assigned. Qualifications 2+ years of experience in regulatory labeling or packaging, preferably in the dietary supplement or consumer goods industry. Strong knowledge of FDA regulations, FTC advertising guidelines, DSHEA, and international labeling standards. Experience with document control systems and engineering change orders. Excellent proofreading skills and attention to detail. Strong organizational, multitasking, and communication skills. Ability to collaborate in a fast-paced, cross-functional environment.

Who we are: Cosmetic Solutions is a leading manufacturer of cosmetic and OTC products, committed to innovation, quality, and continuous improvement. Our Quality Control team plays a vital role in ensuring our products meet the highest standards of safety, efficacy, and compliance. We are seeking a detail-oriented and proactive Quality Control Technician to join our Raw Materials team. This role is essential to maintaining product integrity and regulatory compliance through rigorous testing and documentation practices. Quality Control Lab Technician Major Responsibilities Sample all incoming raw material for Quality control testing Conduct daily quality control testing Water Maintain the raw material standards library Conduct routine and non-routine testing of raw materials, in-process items, and finished goods. Maintain retained sample inventory and storage area. Calibrate and maintain lab equipment (pH meter, viscometer, balances). Review and follow SOPs, specifications, and related documentation. Compile, interpret, and report analytical data. Troubleshoot instruments and initiate investigations for anomalies and deviations. Ensure compliance with GLP, GMP, and SOPs. Document test results accurately in lab notebooks and databases. Collaborate with cross-functional teams to resolve quality issues and implement corrective actions. Participate in writing SOPs, OOS reports, deviations, CAPAs, and investigations. Support sample testing, data entry, and coordination with external labs/vendors. Promote and demonstrate company core values and participate in 6S lean initiatives. Maintain a clean and organized lab environment. Perform other duties as assigned by management. Support the daily execution of the Quality Management System QUALIFICATIONS: Written/oral communication skills required. 2-3 years of experience in the Cosmetic or pharmaceutical industry preferred. Associate's degree or higher in Chemistry, Biology, or a related scientific discipline. Experience & Skills: Experience in cosmetics, pharmaceuticals, or other FDA-regulated industries. Strong knowledge of GLP, GMP, and regulatory standards. Experience in a regulated laboratory environment. Excellent attention to detail and organizational skills. Strong problem-solving and analytical abilities. Effective communication and teamwork skills. Proficiency in Microsoft Office and laboratory data systems. Ability to work independently and manage multiple priorities. Cosmetic Solutions LLC. is committed to equal employment opportunity for all employees and applicants for employment without regard to age, color, creed, disability status, gender, national origin, race, religion, sexual orientation or veteran status, or any other legally protected status.

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.

Job Title: Quality Regulatory Technician - Labeling Compliance Department: Quality Assurance / Regulatory Affairs Employment Type: Monday - Friday 8:30am - 5pm $19 - $22/ HR We are seeking a detail-oriented Quality Regulatory Technician to join our Quality Assurance team, specializing in labeling compliance. This role ensures that all product labels and packaging meet internal standards and adhere to local, state, federal, and international regulatory requirements. The ideal candidate is highly organized, collaborative, and experienced in dietary supplement labeling and packaging. MUST BE BILINGUAL ENGLISH/SPANISH. Key Responsibilities Apply style guidelines and branding standards to new and revised product labels. Ensure compliance of all labeling with applicable local, state, and federal regulations. Create and revise label items in the company's document control system; draft and release engineering change orders. Support continuous improvement initiatives within the Labeling department. Provide daily regulatory support for labeling strategies and operations across multiple projects. Interpret and apply regulatory guidance to labeling within the dietary supplement industry for domestic and international markets. Collaborate cross-functionally with teams including Engineering, Marketing, Quality, and R&D to support label and packaging updates and new product development. Interface with distributors and stakeholders to resolve labeling/packaging issues. Oversee the development and review of advertising and promotional materials for regulatory compliance. Conduct proofreading and side-by-side reviews of primary and secondary labels, including multilingual inserts, for final artwork approval. Manage and track labeling/packaging timelines and documentation for regulatory submissions and audits. Communicate regulatory updates and interpret compliance directives for internal teams, offering solutions and guidance. Provide support to Regulatory and Design teams and assist with additional regulatory duties as assigned. Qualifications 2+ years of experience in regulatory labeling or packaging, preferably in the dietary supplement or consumer goods industry. Strong knowledge of FDA regulations, FTC advertising guidelines, DSHEA, and international labeling standards. Experience with document control systems and engineering change orders. Excellent proofreading skills and attention to detail. Strong organizational, multitasking, and communication skills. Ability to collaborate in a fast-paced, cross-functional environment.

Quality technician Quality Inspector OVERVIEW: The Quality Technician is responsible for ensuring that all quality related documents are completed to allow for product approval and on-time delivery. ESSENTIAL DUTIES AND RESPONSIBILITIES: Setup And Monitor SPC Collecting Activities Release all Jobs Prior to Manufacturing Comply with ISO and Customers QC Standards, Procedures and Specifications Prepare First Article Inspection packages, IAW AS9102 Develop Quality Inspection Plans. Develop PFMEA, control plans, flow charts and any APQP, as required. Track and upkeep PPAP requirements Participate in root cause and corrective action items utilizing 8D methodology Train Quality Inspectors on proper inspection techniques Follow Routers Instructions Perform First Piece, In process and Final Inspections using CMM/Layout Inspection SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. COMPETENCIES Language Skills Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals. Ability to write reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Skills Ability to apply common sense, understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. EDUCATION, EXPERIENCE, and TRAINING: High School Diploma or general education degree (GED) and/or 5 years of experience in Quality Assurance. Working Knowledge of common Drawing Standards and Interpretation Knowledge of Inspection Methods and Techniques Knowledge of basic GD&T CERTIFICATES, LICENSES, REGISTRATIONS: There are no specific requirements for this position. COMPUTER SKILLS: Word Processing and Spreadsheet Software TRAVEL REQUIREMENTS: There are no specific travel requirements for this position. PHYSICAL DEMANDS - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and/or move up to 10 pounds. The employee must occasionally lift and/or move up to 100 pounds. The employee must frequently stand, walk, sit, use hands to finger, handle or feel, reach with hands and arms and talk or hear. The employee must occasionally climb or balance and stoop, kneel, crouch or crawl. VISION REQUIREMENTS: Snellen 14/18, (20/30) or Jaeger 2 - employee will be tested in at least one eye, either corrected or uncorrected Color Vision Requirements: Individuals shall be capable of adequately distinguishing and differentiating colors used in the method for which certification is required, the process being performed or inspection activity. Color Perception testing is required one time only. Note: Vision tests may be substituted for the options listed above providing the equivalence is verified and documented by a licensed optometrist or ophthalmologist. WORK ENVIRONMENT - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. This position regularly works in an environment near moving mechanical parts. This position occasionally works in an environment with fumes or airborne particles. This position works in an environment with moderate noise level (Examples: business office with computers and printers, light traffic)

Funky Buddha Brewery, located in Oakland Park, Florida, is seeking a full-time Entry-Level Quality Control Lab Technician to join its growing team. Established in 2010 at its Boca Raton brewpub, Funky Buddha is known for pushing the boundaries of traditional brewing methods with culinary-inspired recipes utilizing all-natural, food-centric ingredients. The brewery has since expanded into alternative beverage production, including THC-infused products, while maintaining a strong commitment to quality, safety, and compliance. This position is ideal for someone early in their laboratory or quality career who is eager to learn, detail-oriented, and interested in working in both traditional brewery quality control and regulated THC beverage testing. The role will work closely with and under the guidance of the Senior QC Lab Technician and Quality Manager. JOB DESCRIPTION The Entry-Level Quality Control Lab Technician supports quality assurance and quality control activities across both beer and THC-infused beverage production. EXAMPLE OF DUTIES: ESSENTIAL FUNCTIONS Beer Quality Control Assist with aseptic sampling of beer, wort, yeast, water, and brewery environments Prepare microbiological media and assist with plating and basic microbial analysis Perform routine yeast cell counts and viability testing under supervision Support chemical analysis including pH, alcohol %, bitterness, and color measurements Enter and maintain quality data in brewery software systems THC Product Quality Control Assist with sampling and testing of THC-infused beverages Support potency, homogeneity, and stability testing preparation Maintain chain-of-custody documentation and compliance records Follow all SOPs and safety procedures related to THC handling SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the supervisor based upon the particular requirements of the company. Assist with R&D trials and quality improvement projects Support production and operations teams as needed Perform other duties and special projects as assigned PHYSICAL REQUIREMENTS Near Vision Constant Far Vision Constant Hearing Constant Talking Constant Sitting Frequent Walking Frequent Computer Use Frequent Crouching, Bending, Stooping Frequent Reaching Occasional Grasping Occasional Pushing/Pulling Occasional Lifting/Carrying up to 55 lbs Occasional Climbing Stairs Occasional SAFETY REQUIREMENTS OSHA laws require the use of the following Personal Protective Equipment (PPE) when performing work duties that have the potential of risk to your health or safety: Safety goggles when walking through the Production area Steel Toe rubber boots Hearing Protection in loud environments Safety gloves when handling industrial strength chemicals Employees will be trained in the proper use and care of assigned PPE. Funky Buddha Brewery provides the required PPE. It is your responsibility to report defective, damaged or lost PPE, or equipment that does not fit properly to your Manager. ORGANIZATIONAL RELATIONSHIPS No positions directly report to this position. SPECIFIC JOB KNOWLEDGE, SKILL AND ABILITY The individual must possess the following knowledge, skills and abilities and be able to demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of skills and abilities. Entry-level laboratory or manufacturing experience preferred Strong attention to detail and documentation skills Proficiency with Microsoft Office Willingness to learn laboratory techniques and regulatory requirements Ability to work safely with hazardous chemicals Ability to work safely in a wet, noisy, and non-temperature-controlled environment Ability to work safely in confined spaces and around complex machinery Ability to stoop, squat, kneel, and crawl for purposes of collecting samples, gathering data, and cleaning Ability to work independently on multiple projects at one time, maintaining attention to detail with each project Ability to meet production, quality and safety standards Open mind for cross-training and covering other department's tasks related to beer production and quality QUALIFICATION STANDARDS EDUCATION Four-year college degree in natural sciences (e.g., microbiology, biochemistry, food science, etc.) preferred. LICENSES OR CERTIFICATES No special licenses or certificates required. GROOMING All employees must maintain a neat, clean and well-groomed appearance. Integrity, loyalty and a good sense of humor are all factors in who we hire. We are a rapidly expanding company with growth potential within. Funky Buddha Brewery is an Equal Opportunity Employer