Quality control inspector jobs in Petaluma, CA - 109 jobs

Want to make an impact? As a Quality Technician reporting to the Quality Supervisor, you'll be a key player in ensuring every candy we make is safe, consistent, and top-quality. You'll monitor production processes, inspect materials and packaging, verify procedures, maintain documentation, calibrate equipment, and ensure our formulations, nutritional info, and ingredient statements are accurate. Your work helps keep our products delicious and compliant every day. ***Position requires the ability to work overtime. As a result, it may require working varying start times, end times, and weekends dependent on business needs. Ways you will make a difference Inspects supplies, raw materials, WIP, and finished products to verify quality standards. Reviews formulas to ensure all processing parameters and procedures are in compliance. Samples and documents process data to meet product specifications. Verifies processing data and makes recommendations if necessary. Evaluates and approves all work in progress and finished products. Performs basic computer skills including but not limited to Windows, Spreadsheets, and Word Processing. Implements statistical methodology to analysis processing. Calibrates testing equipment periodically. Provides and assists in designing forms for the manufacturing departments. Reports all discrepancies to Quality Assurance leadership. Coordinates with Operations staff the successful disposition of non-conforming product. Supports internal audit programs. Inherent in each position is a general duty to maintain each respective work area in a safe and sanitary condition. Regular, predictable, full-time attendance is required as an essential function of this position. The employee may be required to perform other such duties within the scope of their employment as may be assigned. The employee must also possess the ability to take direction, follow instructions, work with others, follow work rules and schedules, focus on details, and work flexible hours as needed (including weekends). Skills that will make you successful To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS AND ABILITIES Proficiency with MS Office, including Word, Excel, and Outlook; Redzone, database and ERP system experience preferred. Strong understanding and commitment to food safety and quality; knowledge of HACCP and FSMA standards preferred. Ability to manage time and multitask successfully. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, and taste or smell work in progress and finished goods. The employee is occasionally required to sit; during product evaluations they are required to use hands to manipulate, handle, or feel objects, tools, or controls; and talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision. The employee must ascend and descend stairs or climb on high platforms of up to 15 feet high, in order to perform essential functions and report to their respective workstation. The employee is occasionally required to reach with hands and arms, balance, stoop, kneel, crouch, or crawl. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works near moving mechanical parts. The employee will be exposed to high heat (140F) for up to 10 minutes and low temperature (below 40F) to perform specific tasks. The employee occasionally works in outside weather conditions and is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals. The employee must have the ability to tolerate strong fruity, spicy, bold or pungent smells as part of routine QA checks. The noise level in the work environment is usually loud. Experiences that will support your success One year certificate from college or technical school; or two (2) to three (3) years related experience and/or training; or equivalent combination of education and experience. An equivalency of education could possibly fulfill formal degree requirements. At Ferrara, we're proud to support our employees by providing comprehensive benefits such as health insurance, dental insurance, a 401(k), and paid time off (PTO). Eligible employees may also receive an annual bonus based on company performance. Learn more about our benefits at *******************************************

Performs any combination of the essential duties and responsibilities of quality control at manufacturing facility in Dixon, CA. Successful candidates will be required to participate in a pre-employment drug screen and random drug screening per our Drug Free Workplace policy. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Inspects cast floats, float assemblies, and metal fabrications, hardware components, and lumber; * Inspects the casting process per drawing requirements; * Performs concrete tests per ACI / PCI and customer specifications; * Scans production and inspection documents; * Conducts safety tasks and inspections as required by The BMI Safety Program; and * Documents and records QC activities. * Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or equivalent required. Requires knowledge of or ability to learn the characteristics of concrete float fabrication with 12 months of experience working with concrete and/or prior inspection. Requires one year of experience in Quality Control. CERTIFICATES, LICENSES, REGISTRATIONS: ACI concrete field testing tech Grade 1 Certification. Possess or ability to obtain PCI Quality Control Technician Levels 1 and 2 within 12months of hire. Ability to read production drawings. COMPUTER SKILLS: To perform this job successfully, an individual should be proficient with MS Word, MS Excel, and MS Outlook. Must be able to use a document scanner.

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

Join our mission-driven Quality team as the Quality Control Inspector at Endologix! WHO WE ARE: Endologix LLC is a California-based global medical device company dedicated to improving patients' lives through innovative therapies for the interventional treatment of vascular disease. Our therapeutic portfolio addresses clinically relevant unmet needs, spanning from abdominal aortic aneurysms to lower limb peripheral vascular disease. We are committed to delivering excellent clinical outcomes through precision in product design, advanced manufacturing, and comprehensive physician training-supported by industry-leading clinical evidence. At Endologix, we're driven by purpose, innovation, and the opportunity to make a lasting impact in vascular health. What sets us apart is not just our technology, but our culture. At Endologix, we foster a forward-thinking, mission-driven environment where every team member plays a vital role in advancing patient care. Our values guide how we operate: we prioritize patient outcomes, act with integrity, stay curious and innovative, move boldly in pursuit of excellence, and collaborate across teams and with physicians to achieve exceptional results. As for our people? We empower them with the tools, trust, and continuous learning they need to grow. If you're passionate about making a meaningful difference in healthcare, you'll find purpose and belonging here. ABOUT THE ROLE: We're looking for a Quality Control Inspector to join our mission-driven Quality team. In this role, you'll be responsible for performing inspections of components, subassemblies, and finished medical devices to ensure compliance with quality standards and regulatory requirements. This includes conducting quality checks, performance tests, reviewing documentation, and verifying Device History Records (DHR) for product release in accordance with the medical device Quality Management System (QMS). Responsibilities WHAT YOU'LL DO: * Perform audits, inspections, configuration checks, and functional testing to ensure product quality and compliance with established procedures. * Review and verify lot history records for completeness, accuracy, and adherence to SOPs; investigate records related to customer experience reports. * Inspect subassemblies, finished products, purchased components, and tools using defined criteria and standard mechanical, and/or electrical measurements. * Conduct product rework on subassemblies or finished goods as required. * Accurately document inspection and testing results in compliance with Good Documentation Practices (GDP). * Review Device History Records (DHR) for compliance with established procedures and GDP requirements. * Identify issues and provide initial recommendations for corrective actions or process improvements to supervisors. * Perform product testing to ensure conformance to quality standards. * Work within a cleanroom environment, following all applicable protocols and safety requirements. * Perform temperature and particle count monitoring; manage ERP (QAD) and MES application transactions; handle multiple tasks efficiently in a fast-paced manufacturing environment. * Perform other duties as assigned by the supervisor. * Demonstrate punctuality, reliability, and a strong work ethic. Qualifications WHAT YOU'LL BRING: Education: * High School Diploma or equivalent required. Experience: * 1-5 years of Quality Control experience, preferably in the medical device industry. Skills/Competencies: * Ability to understand and follow technical procedures, work instructions, and basic specifications related to the inspection of products and components. * Skill in identifying relevant information in technical drawings and documents and reporting any discrepancies to the supervisor. * Familiarity with applicable quality standards and willingness to learn about specific regulations under supervision * Mechanical aptitude and working knowledge of measurement instruments. * Strong written and verbal communication skills for reports, correspondence, and presentations. * Mathematical proficiency in fractions, percentages, ratios, and proportions. * Problem-solving skills with the ability to work in a cross-functional environment and manage multiple priorities. WHAT WE OFFER: At Endologix, we know that great work starts with great people - and people do their best when they feel valued and supported. That's why we offer competitive pay, solid benefits, career growth, a culture that genuinely cares, and the flexibility you need to thrive both at work and at home. But more than that, we offer purpose. You'll be part of a team that's making a real impact on patients' lives. When you join us, you're not just taking a job, you're building a meaningful career with a team that's invested in your success. The compensation package includes: * Hourly rate of $24.03/hr-$29.44/hr * Discretionary bonus * Equity participation as approved by Board of Directors (4-year vesting schedule) * Comprehensive health, dental, and vision insurance plans * Generous PTO and holiday schedule * 401(k) retirement plan with company match Plus: * Employee wellness initiatives and mental health support * Collaborative and inclusive company culture focused on impact and innovation * Opportunities for career growth and internal mobility HOW WE LEAD WITH OUR CORE VALUES: * Patient Outcomes Drive Us: We improve lives with every advancement we deliver. * Integrity Defines Us: We do what's right, stay transparent, prioritize quality, and own our actions. * Innovation Advances Us: We stay curious, adaptable, and push boundaries. * Boldness Propels Us: We take smart risks and are unafraid in our pursuit of excellence. * Collaboration Unites Us: We partner across teams and with physicians to drive exceptional results. OUR COMMITMENT TO EQUAL OPPORTUNITY & VETERAN INCLUSION: Endologix LLC is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. As a federal contractor, Endologix LLC is committed to taking affirmative action to recruit, employ, and advance in employment qualified individuals with disabilities and protected veterans.

About Us: Toray Advanced Composites (TAC) is a leading supplier of advanced composite materials for the aerospace, sporting goods, motorsport, and industrial markets. You will find our thermoset composite products on nearly every satellite, space launch vehicle, unmanned aircraft, military and commercial aircraft in production today. TAC also provides composites materials to industrial and recreational applications including mountain bikes, medical prosthetics, and sports equipment. Our thermoplastic prepregs, known in the industry as Cetex , are found in a wide range of commercial and military aircraft, including large wing structures and interior applications like seats and galleys. Our Cetex products are available in unidirectional tape or fabric form in a variety of engineered thermoplastic resins including PEEK, PPS, PEI as well as a full line of performance thermoplastics including Nylon, PET, PC/ABS, HDPE, and PP. JOB TITLE: Quality Technician II REPORTS TO: Quality Supervisor SUMMARY OF FUNCTIONS: The Quality Technician II will support Toray's quality team in one or more phases of the lab. In this role, the Quality Technician II will uphold Toray's quality standards which are set in place by the organization, customers, and management. Roles and responsibilities are subject to change. Quality Technician Level Breakdown: Level Description III: Competent in 3 or more lab phases, or Mastery of 2 lab phases and competent in another. II: Competent in 2 or more lab phases, or Mastery of 1 lab phase and competent in another. I: Entry level to attain competency in 1 or more phases of the lab. MAJOR DUTIES AND REQUIREMENTS: Quality: 3 levels of QA lab technicians exist, broken up by competency in the lab phases. Technician roles are filled based on need, but cross-training is encouraged. General Knowledge: Familiarity with composite materials, specifically carbon fiber and fiberglass composites Knowledge of time and temperature-sensitive (TATS) materials Use of Microsoft Excel workbooks and Microsoft Access to record and report data Ability to read and follow written Lab Request instructions Communicate discrepancies or non-conformances to Supervisor and/or Quality Engineer Strong ethic regarding data integrity Usage of FIFO “first in, first out” for self-scheduling assignments Record and document work performed each day in a “pass down” email to the supervisor if working off shifts Layup Phase Technician: Support the Layup Phase with the following: Document incoming material traceability information into Toray's database Use of ply cutter to kit plies of prepreg required for panels Layup prepreg panels for acceptance testing per documented test plans Layup test coupons with resin films, foams, and other aerospace materials Program cures into the digital oven and autoclave and record the collected data Physicals Phase Technician: Support the Physicals Phase with the following: Use scales, calipers, and other devices to measure the size of prepreg/other samples Use ovens/furnaces to perform prepreg testing Use acids (acetone/NMP) to perform prepreg testing Visually or otherwise inspect prepreg specimens to outlined criteria Sample Cutting Phase Technician: Support the Sample Cutting Phase with the following: Knowledge of machining best practices for composite materials Familiar with industry-standard tolerances for coupon geometry Use calipers and micrometers to ensure cut coupons meet required tolerances Prepare samples through abrading, cleaning, and application of adhesive for testing Maintain coupon traceability throughout multiple machining operations Mechanical Phase Technician: Support Mechanical Phase with the following: Use calipers/micrometers to properly report the dimensions of test samples Ensure test coupons meet required tolerances Use Instron test frames to test specimens Able to use Blue Hill software to perform testing Perform mechanical tests on prepared samples to ASTM/other industry standards Troubleshoot minor issues with test setups/test frame configurations Apply strain gages to the surface of test coupons. FV/Density Phase Technician: Support FV/Density Phase with the following: Use calipers/micrometers/scales to properly report the dimensions of test samples Be familiar with the use of acids (sulfuric/nitric/MEK) to perform sample digestions Use ovens/furnaces to cure or perform burn-offs for testing Use of CEM microwave digestion system to perform acid digestion Use of Pycnometer and processes to perform density testing Analytical Phase Technician: Support Analytical Phase with the following: Use calipers/micrometers to properly report the dimensions of test samples Use of ovens/furnaces to perform testing Ensure test coupons meet required tolerances Use of Rheometer and Dynamic Mechanical Analysis to perform testing to ASTM/other industry standards Use of Thermal Mechanical Analysis (TMA) to perform testing to ASTM/other industry standards. Use of Differential Scanning Calorimetry (DSC) to perform testing to ASTM/other industry standards. Use of High-Performance Liquid Chromatography (HPLC) to perform testing to ASTM/other industry standards. Use of Fourier-Transform infrared spectroscopy (FTIR) to perform testing to ASTM/other industry standards. Perform required routine validations on equipment Troubleshoot minor issues related to equipment configurations and sample loading. Dimensional Inspection Phase Technician: Support the Dimensional Inspection Phase with the following: Inspection of incoming and outgoing products to engineering specifications using basic test and measuring equipment Ability to work with handheld gauges, such as calipers, micrometers, height gauges, pin gauges, thread gauges, etc. Ability to work with Coordinate Measurement Machine (CMM) and Portable Coordinate Measurement Machine (PCMM). Knowledge of PCDMIS CAD ++ inspection software (preferred) Familiar with CAD models (IGES, Step, Solidworks, Catia) Ability to read and interpret blueprints and know definitions of critical, major, and minor characteristics using (ASME Y14.5) Geometric Dimensioning and Tolerancing (GD&T) discipline Ability to measure parts and determine if they are meeting print specifications Inspect first part against each measurement as indicated on print. Verify acceptable tolerance. Indicate completed inspection on the corresponding inspection record Experience with engineering drawings & tolerance, standards & specifications in accordance with (ASME Y14.5) Geometric Dimensioning and Tolerancing (GD&T) Choose and check the calibration of the inspection equipment to be used Perform visual and dimensional inspection of purchased parts, tight tolerance machined parts, stamped and fabricated parts, components, assemblies, and materials. Perform first article inspection, incoming, in-process, and final inspections on new and revised parts Generate, distribute, and file inspection reports as required Document non-conforming products when detected. Attach Red Tag and/or Red NC tags to the non-conforming product Timely completion of all paperwork associated with the position including NC tags Complete and maintain all documentation per customer and/or internal requirements Responsible for the completeness and accuracy of all work performed Safety: Follow safety procedures for PPE (personal protection equipment) Properly dispose of hazmat waste Maintain a clean working environment through a “clean as you go” mentality EXPERIENCE AND/OR EDUCATION REQUIREMENTS: Minimum of high school diploma or equivalent At least 2 years of experience working with composites or productions or quality Must be capable of lifting up to 25 lbs. Basic computer skills (MS Suite) required Must be able to follow written and verbal instructions for machine operation Must be able to communicate clearly (written and verbally) in English Must be able to follow written and verbal instructions by reviewing SOPs and customer specification Understand basic laboratory terminology Understand weights and measurements in metrics and standard units Ability to operate calipers, micrometers, and scale Able to work and communicate as a team Maintain work areas in a neat, orderly, and safe manner Excellent attendance; ability to work overtime, weekends, and off shifts when needed BENEFITS AND PERKS: Comprehensive Medical, Dental, and Vision Insurance Plans FSA/HSA Plans Available Paid Holidays Gym Membership Tuition Reimbursements 401(k) Plan with Company Match Paid Time Off Employee Engagement Events Referral Bonus Program Life Insurance and AD&D Coverage Short-Term and Long-Term Disability Insurance Parental Leave & Paid Family Leave Plus much more! COMPENSATION: $25.00-$36.00/hr DOE Toray Advanced Composites employment practices offer equal employment opportunity and does not discriminate against its employees or applicants because of race, color, religion, sex, pregnancy, national origin, ancestry, age, marital status, physical or mental disability, medical condition, sexual orientation, or any other basis prohibited by law. Equal employment opportunity will be extended to all persons in all aspects of the employer/employee relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall, and termination.

Title: Quality Technician Schedule: Monday Friday Pay Range: $30-$36/hr on w2 The Quality Technician will report to the Receiving Quality team lead and will have the goal to support the development of business processes to ensure that products and services provide a high level of quality that meets defined standards and specifications. This role will be helping in establishing high quality standards and ensuring product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. The role will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Create inspection plans to conduct visual, functional, and mechanical measurements, & tests across multitudes of parts ranging from injection molding, castings, 3D printing parts to PCBAs, and electrical sub-assemblies Perform Metrology tasks using CMM as needed Previous mechanical, electrical, and electronics equipment inspection background with ability to use precision measurement tools Experience in defining and executing quality inspection criteria for the injection molding, castings, 3D printing parts to PCBAs, and electrical sub-assemblies is required Qualifications Minimum 2 years experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Familiarity with Google suite (Google Docs, Google Sheets, Google Slides) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Previous experience in SAP and/or JIRA system Industry background and/or experience in;automotive, software, contract manufacturing, customer management

Quality Control, Technical Service and R&B support of existing products, new products and raw materials to support the needs of customers. Requires knowledge of laboratory, analytical and technical skills. Maintain quality standards and specifications of raw materials and finished product through testing and analysis of results. Ensure that product documentation and testing paperwork are completed properly and clearly. Perform testing for Quality, R&D and/or Technical Service. Operate various analytical and mechanical testing equipment. Perform housekeeping duties and assignments to maintain a clean and safe working environment in all areas of the Lab. Complete and update reports, logs, etc. to ensure that product and standards are within required specifications, and laboratory equipment is operated and maintained properly, with any and all problems clearly communicated to other lab personnel and Supervisors. Follow all safety procedures and all company and department policies and procedures. Assist with team activities, attend monthly safety meetings and any other scheduled meetings. Interact effectively with chemists, technical service, production and supervisors Report test results to the initiator. Must demonstrate the following emotional intelligence skills: Emotional Empathy Positive Attitude Excellent Communication Skills Flexibility / Adaptability Interpersonal Skills

Do you want to change the world? Zipline uses drones to deliver critical and lifesaving medicine to thousands of hospitals serving millions of people in multiple countries. Our mission is to provide every human on Earth with instant access to vital medical supplies. Join Zipline and help us make this a reality for billions of people. About the Role As the Quality Inspector Supervisor at Zipline, you will lead our team of inspectors who safeguard the quality of all incoming parts and components that make our aircraft safe and reliable. You will be responsible for training, developing, and managing a team of inspectors, ensuring inspection best practices are upheld, and driving continuous improvements in how we assess hardware quality. You will collaborate closely with the material planning team to align inspection priorities with production needs and with Quality Engineering to support root-cause analysis and corrective actions. This role requires a strong technical background in GD&T and inspection tooling, as well as excellent communication and task management skills to ensure the team's success. This position is ideal for someone who enjoys coaching others, thrives in a fast-moving environment, and takes pride in building inspection processes that scale. What You'll Do Team Leadership & Development * Supervise and develop a team of quality inspectors, upholding best practices and providing training in inspection methods, GD&T interpretation, and use of tooling/fixtures. * Set clear expectations for performance, hold the team accountable to quality standards, and create growth opportunities for individuals. * Foster a culture of ownership, precision, and continuous improvement within the inspection team. Inspection Planning & Prioritization * Partner with the material planning team to determine daily/weekly inspection priorities and allocate resources accordingly. * Balance workloads across the team by understanding work scope, inspection complexity, and inspector capabilities. * Ensure timely inspections that support production schedules without compromising quality. Technical Expertise * Act as the subject-matter expert on GD&T, metrology, and inspection tooling/fixtures. * Review and critique inspection plans, drawings, and fixture designs, providing feedback on feasibility and tolerance stack-ups. * Guide the team in using the right tools for each inspection and identifying tricky or non-obvious issues. Process Improvement & Communication * Develop and refine inspection processes that scale with increased production rates. * Ensure accurate documentation and traceability of inspection results in the quality-management system. * Drive clear communication of inspection results, nonconformances, and priorities across teams. * Collaborate with Quality Engineering to support root-cause investigations and corrective actions. What You'll Bring * 5+ years of hands-on quality inspection experience in manufacturing, aerospace, or related fields, including at least 2 years in a leadership or supervisory role. * Deep technical literacy: proven expertise in GD&T, engineering drawings, schematics, and inspection plans. * Strong knowledge of inspection tooling, fixtures, and metrology methods. * Demonstrated ability to train, mentor, and coach others in inspection best practices. * Experience prioritizing workloads and balancing resources across a team. * Excellent communication and organizational skills; able to clearly assign work, track progress, and communicate status. * Experience collaborating with planning, engineering, and production teams to align quality and schedule goals. * Proficiency with quality documentation software (e.g., 1Factory), task tracking tools (e.g., Jira), and general computer literacy. * Strong attention to detail with a disciplined, process-driven mindset. * Experience inspecting composites (carbon fiber or similar) strongly preferred. Other Requirements * Ability to lift up to 20 lbs and perform hands-on work throughout the day * Comfort working with tools, chemicals, and hardware in a lab/manufacturing environment (including respirator use when required) What Else You Need To Know Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

The Bed Control Coordinator insures the effective and efficient utilization of acute and long-term care beds, and hospital resources as well as insuring proper registration procedures are followed. This position acts as a liaison between physician, department managers, patients and external agencies concerning the admitting process and is responsible for maintaining the confidentiality of all patient information. Responsibilities POSITION SPECIFIC DUTIES (other duties may be assigned) Assumes responsibility for position responsibilities outlined in the Registrar job description. Maintains the hospital census and reconciliation with nursing units. Calculate observation hours and enter on the account. Reports direct admissions to the nursing supervisor who determines medical necessity and appropriate level of care; coordinates effective patient flow to insure internal and external customer satisfaction; informs physicians of patient arrival times; coordinates admissions with nursing units, ambulances and external entities. Evaluates patient financial status at admission and/or referring to the Patient Financial Advisor as appropriate. Secures and releases patient valuables at admission and discharge. Prepares all surgery and/or GI packets for the following day securing patient orders, insurance verifications and patient notification of possible out of pockets. Completes additional projects as requested by Supervisor or Director. Takes initiative and performs as self-starter in daily activities. Qualifications QUALIFICATIONS/JOB REQUIREMENTS: EXPERIENCE: One year of patient registration experience in an acute facility. More years of experience may be required if hired in a registration area that demands more experience. Work in a physician's office may be substituted for an acute hospital setting if duties are similar. OTHER SKILLS, ABILITIES & KNOWLEDGE: Understands the registration process, managed care/capitation, Medi‑Cal, Medicare regulations, Medical Terminology, HIPAA, ABN, and EMTALA regulations Works effectively with the public, physicians, and staff Provides quality customer service including enhancing patient satisfaction while possessing the ability to work in a high volume production‑oriented and structured environment

Full-time Description To assist in Inspection Lab activities allowing it to perform seamlessly while providing accurate, repeatable measurement results that fully support the needs of our internal and external Customers Requirements 1) Working with peers to help coordinate and schedule Inspection Lab functions so all requirements are accomplished in the most efficient manner possible. 2) Perform first piece, in-process, and final inspections and document as required 3) Program and operate the CMM & Faro Arm 4) Crosstrain on all lab equipment to have a functional knowledge and operational ability of the equipment listed above 5) Be a subject matter expert on the use of all conventional measuring equipment, ability to design and develop specialty gauging, along with a highly developed understanding of GD&T 6) Work with the QA Manager and Quality Engineer and other Inspectors to perform capability studies, Gauge R&R studies, and other statistical techniques. 7) Supply the necessary data for AS9102 and PPAP submissions. 8) Assist in calibration activities to ensure all are accomplished as scheduled Research, and suggest upgrades/alternatives/additions to the existing lab equipment while also justifying the procurement by demonstrating the appropriate ROI

Quality Inspector The Quality Inspector is responsible for performing detailed inspections and tests on incoming materials, in\-process components, and finished optical assemblies to guarantee compliance with engineering drawings, specifications, and internal quality standards. This role is crucial in upholding our commitment to precision manufacturing and a zero\-defect guarantee. Key Responsibilities: Perform Incoming, In\-Process, and Final Inspections of optical components (lenses, mirrors, prisms, windows) and opto\-mechanical assemblies. Utilize a variety of precision measuring instruments, including micrometers, calipers, height gauges, optical comparators, microscopes, interferometers, and radius benches to verify dimensions, tolerances, and cosmetic specifications. Conduct visual inspection of optics for cosmetic defects such as scratches, digs, bubbles, and coating issues according to established standards (e.g., MIL\-PRF\-13830B or custom customer specifications). Read and accurately interpret complex engineering drawings, specifications, and technical documents, including Geometric Dimensioning and Tolerancing (GD&T). Document inspection results accurately, generate inspection reports, and maintain meticulous records for traceability. Identify and quarantine non\-conforming materials or products, and collaborate with the Manufacturing and Engineering teams to investigate root causes and support Corrective and Preventative Actions (CAPA). Ensure all inspection activities adhere to company Standard Operating Procedures (SOPs) and quality management systems (e.g., ISO 9001). Assist in the calibration and maintenance of inspection tools and equipment to ensure accuracy. Contribute to the continuous improvement of quality processes and manufacturing efficiency. Adhere to all company safety protocols and maintain a clean and organized work environment, which may include a cleanroom environment. Requirements Minimum Qualifications: High School Diploma or equivalent. 2+ years of experience in Quality Inspection within a precision manufacturing environment, preferably in optics, photonics, or a related field. Proven proficiency in using precision measurement tools (calipers, micrometers, optical comparator, microscope). Ability to read and interpret engineering blueprints and apply GD&T principles. Exceptional visual acuity and attention to detail for cosmetic inspection of delicate components. Strong verbal and written communication skills and computer literacy for documentation. Ability to work independently, manage time effectively, and prioritize tasks in a fast\-paced environment. Preferred Qualifications: Associate's degree or technical certification in a related field (e.g., Optics, Manufacturing Technology). Prior experience with optical inspection equipment such as interferometers, autocollimators, or specialized optical test benches. Experience with an Enterprise Resource Planning (ERP) or Quality Management System (QMS) software. Knowledge of the principles of optical glass materials and their properties. Certified Quality Inspector (CQI) certification. Physical Requirements: Ability to sit or stand for extended periods. Manual dexterity and fine motor control for handling small, delicate optical components and using precision instruments. Sufficient visual acuity for magnified inspection under a microscope. Ability to lift and move up to 25 pounds occasionally. Benefits "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"687062720","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Pleasant Hill"},{"field Label":"State\/Province","uitype":1,"value":"California"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"94523"}],"header Name":"Quality Inspector\- Applied Optics","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********02449001","attach Arr":[],"custom Template":"5","is CandidateLoginEnabled":true,"job Id":"**********03224003","FontSize":"15","location":"Pleasant Hill","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"dk1on2d2aef**********9e772831fe0f3140"}

Qualifications: High School Diploma or equivalent; Associate's degree or technical certification in Optics or Manufacturing Technology preferred 2+ years of experience in Quality Inspection within precision manufacturing environment, preferably in optics or photonics Proven proficiency using precision measurement tools (calipers, micrometers, optical comparator, microscope, interferometers, radius benches) Ability to read and interpret engineering blueprints and apply GD&T principles Exceptional visual acuity and attention to detail for cosmetic inspection of delicate optical components Strong verbal and written communication skills and computer literacy for documentation Prior experience with optical inspection equipment (interferometers, autocollimators, specialized optical test benches) Experience with ERP or Quality Management System (QMS) software Knowledge of optical glass materials, properties, and ISO 9001 quality management systems Certified Quality Inspector (CQI) certification preferred Responsibilities: Perform incoming, in-process, and final inspections of optical components (lenses, mirrors, prisms, windows) and opto-mechanical assemblies Conduct visual inspection of optics for cosmetic defects (scratches, digs, bubbles, coating issues) according to established standards (MIL-PRF-13830B or custom specifications) Document inspection results accurately, generate inspection reports, and maintain meticulous records for traceability Identify and quarantine non-conforming materials or products, and collaborate with Manufacturing and Engineering teams to investigate root causes and support CAPA Assist in calibration and maintenance of inspection tools and equipment, and contribute to continuous improvement of quality processes

Scope/Responsibilities of Role: Helping design AI systems that write regulatory documents. Deconstructing authoring/review/QC heuristics for engineers. Evaluating AI-generated content quality and identifying edge cases. Bridging the gap between domain expertise (medical writing) and technical product development. Must Have Skills for Role: 3+ years of medical writing experience in regulatory affairs. Direct experience with CTD documents (non-clinical and CMC). Knowledge of FDA, EMA, and ICH guidelines. Ability to extract and document rules/logic for technical teams. Strong QC capabilities. Nice to Have Skills for Role: Familiarity with structured content formats like XML or JSON. Experience working with life sciences software tools.

Job Title: Quality Control Inspector Business Unit: Randtron Schedule: 9/80: Employees work 9 out of every14 days - totaling 80 hours worked - and have every other Friday off. About Fisica Inc. Fisica, Inc. is a premier manufacturer of advanced defense products, specializing in the design and production of airborne and ground-based antennas, as well as cutting-edge electromagnetic systems and simulators. Headquartered in San Leandro, California, with additional operations in Simi Valley, Fisica plays a vital role as a trusted partner to leading defense primes and the U.S. Department of Defense. Our company operates as - ATI, Randtron, Datron and Space Vector-each bringing deep expertise and innovation to the defense sector. Led by a seasoned management team, Fisica is committed to excellence in engineering, manufacturing, and mission-critical solutions that enhance national security. At Fisica, we foster a strong, collaborative work culture that values individual contributions and empowers our employees. Our commitment to innovation, integrity, and teamwork makes us a leader in the defense industry and an exceptional place to build a career. Primary Function: The function of QC Mechanical Inspector has basic responsibility for implementing and maintaining quality standards, procedures and the protocol for the Quality Control functions which include Receiving Inspection and In-Process Inspection. Ensures that product is inspected and tested by company quality standards and the requirements as specified on Purchase Orders for incoming product through Vendors and In-Process Work Orders for product being manufactured In-Process (WIP). Major Responsibilities: Interprets blueprints, work orders, and other documentation to determine acceptance or rejection standards. Performs visual and dimensional inspection of first articles, assemblies, final product, and tooling, utilizing micrometers, calipers, height gauges, and other precision measuring instruments. Ink stamping of sub-assembly and final assembly, CMM and other precision measuring instruments. Documents inspection results, maintain records, and prepare reports. Routes inspected parts to appropriate destination. May perform source inspection at vendor sites. May assist in training lower-level inspectors. Performs limited, intermittent physical exertion. Works under acceptable conditions with some distraction due to occasional exposure to noise, dust, heat or chemicals. Perform QA audits as needed. Follow directions and implement added scope objectives and activities outlined by QA management. Education/Experience/Training: Requires a high school diploma and/or a minimum of 5 to 8 years of consistent mechanical inspection experience. Also requires advanced math aptitude including knowledge of trigonometry, knowledge of highly complex mil-specs, ability to read blueprints, and use of all types of measuring instruments. Considering the complex interface with every functional organization it is very important to have excellent communication skills. Additional Requirements: It is flexible to work varied shifts, overtime, weekends and travel on occasion. Able to occasionally stoop, bend, kneel, and squat. Able to occasionally push, and reach. Able to move items up to 25 pounds for distances of up to 30 feet. Must have good repetitive manual dexterity with both hands. Must have sufficient vision to see relative positions of small parts and able to discern symmetry and proper alignment. Based upon your job duties, and need to visit different areas within the company, you may be exposed to fumes, dust, toxic or caustic chemicals (well below OSHA and ACGIH exposure guidelines), outdoor weather, moving mechanical parts and/or be part of a hearing conservation program due to noise levels around certain equipment. Must wear appropriate personal protective equipment as necessary. Ability to sit for extended periods of time. Must be able to obtain and maintain a Security Clearance. Strong work-life balance. Tuition Reimbursement. Paid parental leave. In compliance with pay transparency requirements, the salary range for this role $61,000 - $113,000. This is not a guarantee of compensation or salary, as the final offer amount may vary based on factors including but not limited to experience and geographic location. Fisica Inc also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on the date of hire, and schedule type. EEO Statement Fisica is proud to be an Equal Opportunity Employer. Fisica is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, military and veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. Fisica maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Fisica is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

3rd Shift QC Lab Tech needs 4 years experience QC Lab Tech requires: 10p-630a Tues-Sat High school diploma/GED and experience working in a chemical laboratory preferred. PC proficiency in Microsoft Office products, specifically excel tabling and charting, SAP, and other database experience preferred. Familiar with analytical equipment, wet chemistry techniques, and/or mechanical testing apparatuses. Strong work ethic, self-motivated and ability to drive projects to desired results. Ability to work on requested shift. Training rotations may occur on a different shift than the application states, and can take 1-3 months to complete. QC Lab Tech duties: Complies with all Safety, Health, and Environmental rules, procedures and regulations. Conducts all laboratory work in a safe manner including the use of proper Personal Protective Equipment (PPE), adherence to the site safety practices, use of lab equipment, 5S, etc Perform all work in strict adherence to QC standard laboratory procedures (SLPs). Reviews and provides recommended improvements to QC standard laboratory procedures (SLPs). Inspection and testing of incoming raw materials, semi-finished goods, and finished goods according to defined instructions, procedures and methods. Executes lab testing and generates test data, documentation and lab reports. Communicates basic observations regarding data and/or experimental outcome. Provides support for projects assigned by Engineers and/or Supervisors. Assists in maintaining project timelines. Employs basic problem-solving skills to overcome project bottlenecks and maintain project deliverable dates

Dragonfly Group is an experienced hybrid real estate solutions company focused on providing an integrated system of properties, technologies, and services designed to improve the real estate experience for all. Dragonfly Group currently has more than 40 operating investment entities throughout the Bay Area. Vert, a member of the family of Dragonfly Group companies, is modernizing the home design process by developing modular, panelized homes to reduce construction time while introducing innovative construction methods and materials. Vert's light-gauge-steel based modular building system streamlines the production process while infusing smart technology (Adomi) into its homes to enhance the experience of the homeowner. Vert seeks an experienced Quality Control Inspector to perform routine quality inspections and tests. Successful candidates will be meticulous in their work, detail-oriented, and possess a background in quality processes. Must be knowledgeable about measurement and test equipment (MT&E). Aptitude for working with data and a solid grasp of basic engineering concepts are helpful. Excellent interpersonal and communication skills are a must. We're looking for a highly organized, methodical professional with a proven track record of experience and success. We offer competitive salaries and an excellent opportunity for career development. Responsibilities: Vert's Quality Control Technician reports to the Quality Control Manager. Perform quality inspections and tests accurately and efficiently, both in the factory and at construction sites, using a variety of instruments, tests, and calculations to determine conformity to the required standards. Inspect and ensure supplies received at the factory or construction sites meet quality standards and consistency. Identify defects in workmanship or non-compliance to specifications and standards. Monitor other accountable individuals carrying out quality activities. Compare test results for compliance with company and regulatory requirements, record results, and notify management of out-of-specification tests and trends. Monitor manufacturing quality at control checkpoints throughout the manufacturing process and identify deviations from control limits-both in the factory and at the construction sites. Correctly record and file all relevant record logs and documentation using databases and systems. Work with cross-functional teams to monitor and improve quality, reliability, and performance. Support, calibrate, and run automated quality control systems. The above duties and responsibilities are representative of the nature and level of work assigned and are not necessarily all-inclusive. Qualifications: High School Diploma/GED - required 1+ years in quality control or quality assurance position Meticulous attention to detail Must have excellent math skills; ability to add, subtract, multiply and divide by all units of measure-using whole numbers, common fractions and decimals. Excellent interpersonal skills Experienced with software, including Word and Excel Skilled with measurement and test equipment Good verbal and written English

Quality Control Technician needs 2+ years of work experience in a professional, manufacturing, or laboratory setting Quality Control Technician requires: High school diploma or GED 2+ years of work experience in a professional, manufacturing, or laboratory setting Basic math skills Clear and effective oral and written communication with a small team within a large company Ability to work independently and to take directions based on circumstances Computer literacy in Microsoft Office Suite Be able to safely work with chemicals in a laboratory and manufacturing environment Preferred: Associates degree in sciences or some college coursework Knowledge of basic laboratory practices Physical Requirements: Must be able to lift up to 50 lbs. Must be able to stand for long periods of time Quality Control Technician duties: Operate analytical instruments to perform quality control testing of liquid 3D printing resin according to standard, including: o Digital Light Processing (DLP) 3D printing. Color and ultraviolet spectrophotometry. Rheology. ASTM methods D790, D412, D638, D7867 Calculate and report test results using Albert and SAP software for the completion of quality tasks Communicate with product development, engineering, and production personnel to make batch adjustments as needed Use good manufacturing practices to maintain clean working environments such as lab benches, fume hoods, and ovens. Monitor equipment performance by completing routine standards checks Perform incoming inspections of raw materials shipments and property data File, maintain, and appropriately dispose of raw material, quality retain, and finished product inventories Comply with weekly 5S standards including sweeping, mopping, organizing, and trash removal. Ensure end to end sample and product traceability Complete other miscellaneous responsibilities within the Quality Department as assigned by department manager

Join our mission-driven Quality team as the Sr. Quality Control Inspector at Endologix! WHO WE ARE: Endologix LLC is a California-based global medical device company dedicated to improving patients' lives through innovative therapies for the interventional treatment of vascular disease. Our therapeutic portfolio addresses clinically relevant unmet needs, spanning from abdominal aortic aneurysms to lower limb peripheral vascular disease. We are committed to delivering excellent clinical outcomes through precision in product design, advanced manufacturing, and comprehensive physician training-supported by industry-leading clinical evidence. At Endologix, we're driven by purpose, innovation, and the opportunity to make a lasting impact in vascular health. What sets us apart is not just our technology, but our culture. At Endologix, we foster a collaborative, mission-driven environment where every team member plays a vital role in advancing patient care. We value integrity, tenacity, and innovation-and we support our people with the tools, trust, and training they need to grow and continuously learn. If you're passionate about making a meaningful impact in healthcare, you'll find purpose and belonging here. ABOUT THE ROLE: We're looking for a Sr. Quality Control Inspector to join our mission-driven Quality team. In this role, you'll be responsible for performing inspections of components, subassemblies, and finished medical devices to ensure compliance with quality standards and regulatory requirements. This includes conducting quality checks, performance tests, reviewing documentation, and verifying Device History Records (DHR) for product release in accordance with the medical device Quality Management System (QMS). Responsibilities WHAT YOU'LL DO: Inspect purchased components, tooling, subassemblies, and finished products using defined criteria and standard physical, mechanical, and/or electrical measurements. Rework or reject subassemblies or finished products as necessary. Support process and system audits using established procedures as audit standards. Document inspection and testing results in compliance with Good Documentation Practices (GDP). Maintain controlled document files and test records accurately and promptly. Inspect test equipment and fixtures to support maintenance and calibration activities. Assist in writing and updating inspection procedures, protocols, and checklists. Evaluate issues and provide initial recommendations for corrective actions or system improvements to the supervisor. Participate in Non-Conforming Material Report (NCMR) management processes. Collaborate with production and quality teams to provide feedback on assembly accuracy and compliance. Review Device History Records and related documentation for adherence to procedures and GDP. Work within a cleanroom environment following all applicable protocols. Perform other duties as assigned by supervisor. Qualifications WHAT YOU'LL BRING: Education: High School Diploma or equivalent required. Experience: 3-6 years of Quality Control experience, preferably in the medical device industry. Skills/Competencies: Mechanical aptitude and working knowledge of measurement instruments. Proficiency in Microsoft Excel and Word. Ability to read and interpret technical procedures, drawing, specifications, ASTM standards, and medical device regulatory requirements. Strong written and verbal communication skills for reports, correspondence, and presentations. Mathematical proficiency in probability, statistical inference, fractions, percentages, ratios, and proportions. Problem-solving skills with the ability to work in a cross-functional environment and manage multiple priorities. Experienced in using measuring equipment such as Microscope, CMM, Instron tester, calipers, pin gauge, micrometer, snap gauge etc. HOW YOU'LL SHOW UP: All In: Bring full commitment to everything you do. Support one another, hold yourself accountable, and take ownership of your work. Move with urgency, deliver on your promises, and lead with boldness and passion. Act with Integrity: Prioritize ethics and transparency in every decision. Earn trust by being honest, respectful, and dependable - working diligently to uphold the confidence of your colleagues, customers, and communities. Tenacious: Meet challenges head-on with resilience and resolve. Stay focused, push through obstacles, and consistently look for solutions, not excuses. Pioneering: Challenge the status quo and embrace innovation. Develop new ideas, test bold solutions, and pave the way for others - driving progress through curiosity and creativity. WHAT WE OFFER: At Endologix, we know that great work starts with great people - and people do their best when they feel valued and supported. That's why we offer competitive pay, solid benefits, career growth, a culture that genuinely cares, and the flexibility you need to thrive both at work and at home. But more than that, we offer purpose. You'll be part of a team that's making a real impact on patients' lives. When you join us, you're not just taking a job, you're building a meaningful career with a team that's invested in your success. The compensation package includes: Hourly rate of $26.44/hr-$30.65/hr Discretionary bonus Equity participation as approved by Board of Directors (4-year vesting schedule) Comprehensive health, dental, and vision insurance plans Generous PTO and holiday schedule 401(k) retirement plan with company match Plus: Employee wellness initiatives and mental health support Collaborative and inclusive company culture focused on impact and innovation Opportunities for career growth and internal mobility OUR COMMITMENT TO DIVERSITY AND INCLUSION: Endologix LLC. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Qualifications: 3+ years of experience in a manufacturing quality control or inspection role Strong knowledge of mechanical inspection techniques and tools Experience using precision measuring tools such as automated laser measurement systems, CMMs, calipers, micrometers, gauges, and vision systems Basic knowledge of high-tech grade materials (e.g., specialty metals, high-purity gases, chemicals, ceramics) Experience following and improving Standard Operating Procedures Basic ability to read and interpret technical drawings and specifications Experience supporting multiple incoming materials operations (fungibility) Good computer skills and ability to use Google Suite or Microsoft Office Ability to work independently and as part of a team in a fast-paced environment Ability to work in cleanroom or lab environment and handle small and delicate parts Capability to handle chemical materials with proper safety measures Capability to handle other functions such as chemical handling and running DOEs Experience supporting other incoming materials operations and managing multiple tasks simultaneously Responsibilities: Perform visual and dimensional inspections of incoming materials, raw materials, and components in a timely manner Enhance and maintain IQC practices and procedures, and review, enhance, and advise on Standard Operating Procedures and Work Instructions Develop and implement a process to clear backlog of uninspected materials and verify materials are in line with drawing requirements Document inspection results accurately, maintain quality records, and work cross-functionally to develop and implement deviation process for incoming materials Identify and report non-conformances, drive root cause analysis and corrective/preventive actions, and support continuous improvement initiatives