Quality control inspector jobs in Redondo Beach, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

With a legacy spanning over 35 years, Harris Spice has been a trusted partner and leading supplier of high-quality spices, herbs, and innovative seasoning blends. With international facilities and a global supply chain, we proudly serve multiple channels of trade-including industrial bulk, food service, and retail. Our commitment to excellence, quality and consistency has earned us the trust of some of the nation's largest and most recognized brands. As Harris Spice continues to grow, we are dedicated to cultivating a dynamic, inclusive workplace where innovation thrives. We're looking for diverse, talented individuals who are ready to grow with us and help strengthen a brand known for trust, quality, and bold flavor solutions. Position Overview/Job Summary: We are looking for a 1st shift (4:30am-1:00pm) Quality Control Technician to join our team. The Quality Control Technician is responsible to ensure food safety and quality of plant through enforcement of HACCP, and Good Manufacturing Practices (GMPs) are followed by all personnel and to confirm each product meets specifications and quality parameters. Essential Job Functions: Performing pre-operational inspections at beginning of shift or production line changeovers to achieve on-time start-up and first-time quality. Collect raw material samples upon receipt and report any discrepancies to Quality Manager. Verify correct raw materials and packaging are being picked, staged, and used in production. Determine the acceptability of products using visual inspections, sampling, and testing protocols (when necessary). Perform detail-oriented tasks to support production such as checking legible lot codes, “best by” dates, container seals, handling production line rejects, etc. Enforce good manufacturing practice Provide support to the production department to minimize downtime and run efficiently. Maintain orderly paperwork and verify accurate documentation among production, quality, sanitation, maintenance, warehouse, and R&D departments. Organize production and quality records by following established protocol. Perform, log, and verify metal detector checks and provide training to production coworkers. Escalate issues of non-conforming products in a timely manner to management and segregate or place on hold. Interact and support cross-functional department personnel and adapt to change in a fast-paced environment. Ability to work with minimum supervision. Follow and enforce personal safety procedures and escalate to management. Other duties as assigned. This position has no direct reports but may assist in training coworkers and/or covering absences. This describes just some of the main duties, activities and responsibilities for the role which may change at any time with or without prior notice. Skills/Qualifications: 1-2 years of experience in a quality or lab role, preferably within a food manufacturing environment. Knowledge of sanitary food lab techniques and equipment. Able to read Standard Operating Procedures and follow instructions. Able to interpret product specifications. Good communication skills Understand and apply company and customer quality standards. Comfortable working with Microsoft Office and other production or lab information systems as needed. English fluency required, bilingual Spanish a plus. Physical Requirements: Ability to stand in a lab environment, ability to lift 55lbs, and handle food samples in a sanitary manner Sit, use hands & arms, twist, bend, push or pull Walking, standing, stooping, bending, kneeling, pulling, pushing, twisting, climb etc. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Harris Spice reserves the right to revise or change job duties and responsibilities as the need arises. Equal Employment Opportunity Statement Harris Spice is a certified Minority-owned business. Our business is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Nikkiso ACD is an engineering and manufacturing company specializing in machinery designed to operate at cryogenic temperatures as low as - 420 degrees Fahrenheit, the boiling point of Liquid hydrogen. For over 50 years, Nikkiso ACD has specialized in centrifugal and reciprocating pumps as well as turbines for air separation. Nikkiso ACD has the most diversified product line in the industry covering nearly every application requiring pumps or turboexpanders. This position is based at Nikkiso ACD located in Santa Ana, CA. Job Overview The Quality Control Inspector is responsible for ensuring that all incoming materials are received accurately and routed to the appropriate departments. This position involves verifying that materials match orders, inspecting for defects or damages, and maintaining the organization of the workspace. You will play a key role in maintaining quality and ensuring that our operations run smoothly. Responsibilities Ensure all products are properly packaged, labeled, and lot controlled. Verify products against purchase orders or packing slips for accuracy. Performs visual, dimensional, and functional inspection and testing according to documented policies and procedures. Maintain ISO standards of the products and ensure that there is proper handling of inspection tools. Maintain the QA incoming and first article database. Records inspection and test data as prescribed by written instructions and procedures. Operates all associated test and measurement equipment as instructed and as documented in procedures. Develop and maintain company inspection reports through the manufacturing process. Receive inventory records, process of receiving inspection documents and all other applicable documentation in coordination with the QA department. Reporting quality anomalies to the supervisor. Manage non-conforming components, ensuring relevant departments are informed and assisting in final resolution. Read and interpret manufacturing drawings. Prepare non-conformance reports, as necessary. May prepare and submit change requests. Documents non-conformances in Non-Conforming Material Review system. May train other Inspectors. Assists in gathering, analyzing, and trending of data. Require to keep accurate records to ensure ISO compliance and to be prepare for regular ISO audits. Other Duties: Performs work of a miscellaneous nature as required. Qualifications High school diploma or GED. Some college preferred. Minimum of 5 years' experience as an Inspection or quality technician/specialist in machine shop, foundry, or sheet metal shop. Experience in use of precision tooling/measuring devices. (Calipers, micrometers, welding gases, torque wrench, scale, measuring tape, jigs, multimeter, etc.) High-level of visual awareness and attention to detail. Advanced organizational and multitasking skills. Experience drafting reports and collating data. Ability to work alone with minimal supervision. Ability to analyze and interpret technical drawings and weld symbols. Microsoft Office 360 (Word, Excel, Outlook) Knowledge, Skills, and Abilities Good vision and hearing. Basic understanding of metrology and arithmetic. Familiarity with ERP/ MRP operating systems. Physical Demands Ability to lift, carry, push, and pull up to 50 pounds unassisted; heavier loads require assistance or a lifting device. Ability to remain on feet for prolonged periods and move around the facility without limitations. Ability to sit and work at a station for extended periods without limitations. Capable of completing tasks that involve repetitive use of hands and other body parts. Safety Expectations Maintain a clean and organized work area. Actively participate in safety improvement activities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Environmental Safety Requirements New Employee Safety Training is required by all newly hired employees, including Safety Awareness. All safety-related training is provided and tracked by the EHS Director. Job specific training modules deemed necessary by the employee's Manager or Director will be required of all employees on an ongoing basis. Understanding and ability to safely work in a potentially explosive environment. Employees are required to wear Nikkiso provided PPE as/when needed. PPEs include safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats, and dust masks. Failure to comply with Nikkiso safety requirements will result in disciplinary actions, up to and including termination. In compliance with the Americans with Disabilities Act of 1990, the employer will provide reasonable accommodations to meet the work environmental and physical demands listed above. Salary Range: $55,000/yr. - $65,000/yr. EEOC Statement Equal Opportunity Employer/Veterans/Disabled Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

Job Description: Quality Control Inspector - Electronics Manufacturing Location: Anaheim, CA, 92807 Job Summary: We are seeking a detail-oriented Quality Control Inspector to join our electronics manufacturing team in Anaheim, CA. The ideal candidate will be responsible for ensuring that all electronic components and products meet quality standards before they are released to customers. Key Responsibilities: Conduct visual inspections of electronic components and products to ensure they meet quality standards Perform functional tests on electronic devices to verify proper operation Document and report any defects or issues found during inspections Collaborate with production team to address and resolve quality issues Maintain accurate records of inspection results and quality control data Qualifications: High school diploma or equivalent Previous experience in quality control inspection in electronics manufacturing industry Strong attention to detail and ability to identify defects in electronic components Knowledge of quality control standards and procedures Excellent communication and teamwork skills

"At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are core values. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us." JOB SUMMARY To interpret engineering data such as drawings and specifications and inspect in accordance with the data. Must be able to use standard measuring equipment such as calipers, micrometers, height gages, dial indicators etc. Perform visual and dimensional inspections for receiving, in process, final and first article inspections on aviation parts from details to top assemblies. Must be able to understand visual and cosmetic standards. Must have the ability to clearly write nonconformance reports and assist in corrective actions investigations. SUMMARY OF JOB DUTIES Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions * Interpret engineering data such as drawings and specifications * Competent in using measuring equipment such as calipers, micrometers, height gages, indicators. * Perform visual and dimensional inspection * Perform receiving, in-process, final, and first article inspections * Perform inspections to visual and cosmetic standards * Able to write inspection reports and nonconformance reports * Able to understand root cause and participate in corrective actions * Perform review of supplier certifications for conformance to requirements * Data collection for statistical analysis * Must understand and be able to interpret tolerances * Understand application and use of all types of precision measuring instruments used in mechanical inspection, including interpretations of geometrical and positional tolerance requirements. * Travel as required to support suppliers or source/auditing inspection program. GENERAL QUALIFICATIONS - Education, Knowledge, and Experience Education: * A High School Diploma is required. * A two-year college (Associate degree) or ASQ Certification is desired. Experience: * Position may be filled with both entry level and experienced candidates. Skills: Preferred Skills/Experience: Other: * Extended or irregular hours may be required. * Must be authorized to work in the United States. * Boeing EnCore is an "at-will" employer; employment is at the mutual consent of both the employee and the employer, and may be terminated at will for any reason, with or without cause, at any time during employment with the Company. * As business conditions warrant a change in the operating necessities of the Company, all employees are expected to react productively, handle other essential tasks assigned now or in the future. * Tasks may vary slightly based on products produced at a division.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Quality Control Inspector - Wire and cable harnesses Full\-time, in\-person On\-the\-job training Must be able to perform detail\-oriented tasks, including inspection and testing. Summary: With supervision, perform basic and routine assembly operations on components, and sub\-assemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. Core Functions: Advanced Soldering Crimping techniques Connector assembly Understanding of Travels and Drawings Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. Use of rulers and tape measure. Knowledge and experience: Cable\/Harness Assembly in Aerospace and Military Applications Ability to Read & Interpret Blueprints, Schematics, Traveler\/Routers, Bills of Material & Wire Lists. Basic math and measurements. Fluent English The following is preferred but not required: Experience interpreting design drawings Experience with wire and cable harnesses Familiarity with standard specifications such as IPC\/WHMA\-A\-620, IPC J\-STD\-001, and NASA\-STD\-8739.4 Certification to the standards IPC\/WHMA\-A\-620, IPC J\-STD\-001, and NASA\-STD\-8739.4 is a big plus. Schedule: M\-F 6:00 am\-2:30pm. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"653983288","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"ZR_1442_JOB"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"4\-5 years"},{"field Label":"Salary","uitype":1,"value":"$20\-$25"},{"field Label":"Salary Type","uitype":2,"value":"Hourly"},{"field Label":"City","uitype":1,"value":"Westlake Village"},{"field Label":"State\/Province","uitype":1,"value":"California"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"91362"}],"header Name":"Quality Control Inspector\-Wire Cable and Harness","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:3525447","is JobBoard":"false","user Id":"4**********0184003","attach Arr":[],"awli ApiKey":"861ql0p5wym4v2","custom Template":"3","awli HashKey":"66ba2a8eeb5a681ba7da00d31a032d78e5ed3414d140cf204a55382c0c8fce038ffeabbeedb5adcc344251186e484454f2800ec019c1cd83b305bb4e1324cd14","is CandidateLoginEnabled":false,"job Id":"4**********8276032","FontSize":"15","google IndexUrl":"https:\/\/greathirehr.zohorecruit.com\/recruit\/ViewJob.na?digest=Qx8B8qu1HVi@yVb@TMCCeHkGwssng5Nj5XZPFJ3aThw\-&embedsource=Google","location":"Westlake Village","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"5a0s1eed**********48682b45b77ac5327c6"}

Job Details Irvine, CA Full Time High School $25.00 - $25.00 HourlyDescription Job Title: Inspector, Quality Control Supervisor/Manager Title: Staff Engineer, Quality (Production Support) Job Description Summary: Responsible for supporting the Quality department with quality control activities related to the manufacture of the THV within the Leeds and Irvine production facilities. To include in-process and final inspection, labelling/packaging, documentation, and environmental monitoring. The role holder will also provide routine reports and communications to provide timely updates on inspection status. Job Responsibilities: Conduct routine testing on THV, to include functional, visual, and final inspection processes, along with supporting sterilization preparation. Perform Microbiological monitoring on ViVitro (Leeds) or BDC (Irvine) when required. Conduct Preventative Maintenance and calibration of the ViVitro (Leeds) or BDC (Irvine) equipment. Conduct audits on the in-process paperwork associated with the manufacturing process including, but not limited to: manufactured valve DHRs, Jasmine preparation and ancillary logs. Provide support to the Engineering staff by gathering data on clinical product to allow decisions to be made on functionality. Adhere to Quality System and record retention requirements. Comply with all site Health & Safety requirements. Contribute to continuous improvement efforts related to valve manufacture and inspection processes. Inspect final packaging labels and confirm they are applied correctly per the relevant standards and Work Instructions. Support other areas of the business as necessary and applicable to the role. Qualifications Required Education and Experience: A-Levels, or equivalent and substantial relevant practical experience, in science related subjects are required. Bachelor's degree in a division of Biology, Chemistry or a Biomedical related discipline is desired (Leeds). Minimum of 3-5 years' experience in Quality within the medical devices or pharmaceutical industries is desirable. Must be familiar with 21CFR820 and ISO 13485 requirements. Hands on experience with these requirements is preferred. Experience assessing products for compliance and final release is desirable. Skills and Abilities Required for This Job: Must be able to work effectively and collaborate within cross-functional teams. Must possess the ability to handle multiple tasks, with high attention to detail. Ability to file and organize records in a compliant, easily retrievable manner. Must be able to effectively articulate (verbally and in writing) results and conclusions. Must have good documentation skills. Must be able to take initiative and work autonomously with the ability to prioritize a workload.

SPT Labtech is a global supplier of innovative lab automation products for the life science markets. Our solutions save time and material costs and simplify complex operations. We are natural innovators. We create, design and manufacture high quality, robust and innovative automated laboratory equipment for academic, pharmaceutical and biotechnology research. We are looking for a talented Quality Control Inspector to join our growing team. You must have the ability to work on complex products and to work collaboratively and flexibly across several inter-disciplinary teams. Inspector Job Responsibilities: Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspect in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Reject all in-coming materials, in-process production, and finished goods products that fail to meet quality standards by specifications or quality criteria through non-conformance process. Assists Quality team members or management with failure and nonconformance data recording and reporting Prioritizes schedules based on product introduction and manufacturing schedules, maintaining a minimum turnaround time. Accomplishes quality and organization mission by completing tasks and responsibilities as needed. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Support the engineering manager or take ownership in resolving quality-related issues in a timely manner Recommend improvements to the production and quality control inspection process to ensure quality control. Be a team member of the quality department and support Production, Engineering and other internal departments to further the interests of the company as a whole. Requirements Written and verbal communication skills Experience with inspecting electromechanical assemblies, machined and metal fabrication highly desired. CMM experience a plus Basic math skills Excellent computer skills to include use of MS Office Attention to detail Analytic skills Documentation skills Time management skills Flexibility and able to change priorities on short notice based on production demands Hand/eye coordination Reporting skills Blueprint reading Education and Experience Requirements: High school diploma Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments One to two years' quality inspector experience Knowledge of ISO and QMS is highly desired Benefits 401(k) Health insurance Dental insurance Vision insurance Paid time off SPT Labtech is committed to a diverse and inclusive workplace. SPT Labtech is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Role: The QC Inspector plays a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections and tests on raw materials, in-process components, and finished goods to identify defects or deviations from specifications. The QC Inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate documentation and reporting, the inspector supports continuous improvement initiatives and helps uphold the company's reputation for excellence. Ultimately, this role ensures that only products meeting the highest quality criteria reach customers, thereby safeguarding customer satisfaction and company success. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or inspection within a manufacturing environment. Familiarity with quality control procedures, inspection techniques, and measurement tools. Basic understanding of manufacturing processes and product specifications. Ability to read and interpret technical drawings and quality documentation. Preferred Qualifications: Certification in Quality Control or related fields (e.g., ASQ Certified Quality Inspector). Experience with statistical process control (SPC) and root cause analysis. Proficiency in using digital measurement instruments and quality management software. Knowledge of ISO 9001 or other relevant quality management systems. Strong problem-solving skills and attention to detail. Responsibilities: Perform visual and dimensional inspections of materials and products at various stages of the manufacturing process. Utilize measurement tools and testing equipment to verify product specifications and tolerances. Document inspection results accurately and report any non-conformances or quality issues to the quality control manager. Collaborate with production and engineering teams to investigate defects and implement corrective and preventive actions. Ensure compliance with company quality standards, safety regulations, and industry guidelines during all inspection activities. Maintain inspection equipment and ensure calibration is up to date to guarantee measurement accuracy. Participate in internal audits and assist in external quality audits as required. Skills: The QC Inspector applies their skills daily by meticulously examining products to ensure they meet all quality standards, using both visual assessment and precise measurement tools. Their ability to interpret technical drawings and specifications allows them to identify deviations and potential defects early in the production process. Communication skills are essential as they report findings clearly and collaborate with cross-functional teams to resolve quality issues effectively. Analytical skills support their role in conducting root cause analysis and contributing to continuous improvement efforts. Additionally, proficiency with quality management software and inspection equipment ensures accurate data recording and compliance with regulatory requirements.

Job Title: Business Development Center Representative Department: Business Development Center Reports to: BDC Director FLSA Status: Non-Exempt Position Description: Communicates with customers through email and phone calls in order to schedule appointments for customers to visit the store by performing the following duties. Duties & Responsibilities: Responds to customer requests from the Internet lead system and gathers information from the customer about the make, type, and quality of vehicle desired; trade in details; customer's goals “Mines” the existing customer database for new and/or additional customer interest in additional vehicle purchases, contacting such customers by email, phone, and text messages Researches and develops lists of potential clients. Identifies and qualifies business opportunities Follows up on sales leads and makes cold calls to potential clients. Schedules appointment with customer to visit the dealership to meet with a salesperson who will then conduct the steps of the sale. Consults regularly with the Internet Director. Follows an owner follow-up system that encourages repeat and referral business and contributes to customer satisfaction. Follows a prospect development system and sends follow up emails and makes follow up calls to those potential customers. Follows established prospecting steps and procedures. Remains knowledgeable of new products, features, accessories, processes, etc. Attends sales meetings and training sessions as scheduled. Meets, or exceeds, written forecast and projection numbers. Other duties as assigned. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience: High school diploma or general education degree (GED); or one to three months' related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to communicate orally or in written form effectively with co-workers, potential and current clients,. Ability to read, analyze and interpret written and verbal instructions. Ability to write routine reports and correspondence, including writing grammatically correct emails and text messages. Ability to effectively present information and respond to questions from managers, clients, and customers. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, and percentages. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate the ability to anticipate and solve practical problems or resolve issues. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to work 5 days a week, 8 to 10 hours per day. The employee is regularly required to talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is frequently required to sit or stand as needed. May require walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder heights, below the waist or lifting as required to file documents or store materials throughout the workday. May include lifting up to 25 pounds for files, computer printouts on occasion. The employee must have excellent keyboarding skills. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to an office work environment. The noise level in the work environment is usually moderate. Primary environment: ambient room temperatures, lighting and traditional office equipment as found in a typical office environment. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. ______________________________ ________________ Signature (Employee) Date ______________________________ ________________ Signature (Supervisor) Date

Responsibilities: Conducts examinations and quality control inspections on products, materials and components at various stages of the production process to ensure compliance with established quality and reliability standards. Participates in analysis statistical data from processes to either confirm compliance with established standards or identify deviations from standards Performs routine visual inspection of soldered connections, mechanical inspections of electronic and electro-mechanical assemblies and subassemblies. Participates in preparing all necessary documentation for reporting acceptance/rejection of inspected and/or tested items. Qualifications: Ability to follow detailed job instructions. Able to apply a systematic Quality Assurance approach while using existing procedures to solve standard problems. Skilled at measuring and using test equipment as prescribed by job assignment. Capable of identifying and independently resolving routine issues. Experience with blueprints, drawings and parts lists. Familiar with the casting, forging, molding, stainless-steel and electronic components use in Aerospace industry. Education & Experience: Education: High School Diploma/Equivalent and work experience that will allow successful performance of job expectations. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 2-5 years of relevant experience Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.