Quality control inspector jobs in Reston, VA - 235 jobs

R.W. Warner, Inc is seeking an experienced Quality Control Superintendent to join our team. This position will oversee the quality assurance and quality control (QA/QC) functions on projects for our Electrical Division (Williams Electric) and our Construction Division (Warner Construction). The ideal candidate will have a strong background in commercial and/or industrial electrical construction, a solid understanding of codes and standards, and the ability to lead inspections and documentation to ensure all work meets company and client requirements. Job Duties/Responsibilities: Implement and maintain project-specific Quality Control Plans for electrical installations. Inspect and verify electrical work to ensure compliance with project specifications, drawings, NEC, and applicable codes. Coordinate with project management, engineering, and field teams to identify and resolve quality issues. Perform and document inspections, testing, and verification activities. Manage quality control documentation including checklists and inspection reports. Facilitate and, in some cases, lead pre-installation meetings and provide training to ensure crews understand quality expectations and procedures. Conduct final inspections and ensure proper turnover documentation to the client. Maintain effective communication with clients, subcontractors, and internal teams regarding quality standards and progress. Qualifications 5-10 years minimum experience in electrical construction, with at least 3 years in a QC role. Strong understanding of NEC, industry standards, and electrical system installation practices. Proven experience providing quality control processes on commercial or federal projects preferred. Ability to read and interpret blueprints, schematics, and specifications. Strong organizational and communication skills, with an emphasis on attention to detail. Proficient in Microsoft Office 365 and construction management software (e.g., Procore, Autodesk). OSHA 30, NFPA 70E, and USACE CQM Certifications are preferred and may be required based on project. Valid driver's license with clean driving record Full-Time Target Salary Range is $75k - $95k (salary will be determined based on experience) Work Environment: This position involves both office and field work, including regular visits to active construction sites. Candidates must be comfortable working in a fast-paced environment while maintaining a strong focus on safety and quality. Benefits & Other Offerings Competitive salary based on experience Health, dental, and vision insurance Short-Term and Long-Term Disability Insurance Whole Life Insurance with Long-Term Care PTO and Paid Holidays (We follow the federal holiday schedule) 401(k) Career growth and professional development opportunities Collaborative and supportive work environment *Salary will be based on qualifications and years of experience* Apply on LinkedIn or directly through our company website using this link: Quality Control Superintendent R.W. Warner, Inc. is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace where all individuals are treated with respect and dignity. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Job Title: QC Microbiology Technician I Duration: 12 Months **Day Shift** 100% onsite (lab environment) Shifts: 4/10 (4 days x 10 hours/day) SUN-WEDS 7:00am-6:00pm* Job Description Working with the Quality Control team in supporting our efforts - cancer immunotherapy. This position provides Quality Control microbiological testing for clinical and commercial manufactured product, responsible for product testing, microbial growth promotion testing, utility testing and environmental monitoring. Responsibilities (include but are not limited to): • Perform environmental monitoring of cleanrooms • Collect water samples to ensure all sample collected per schedule and tested on time • Perform and review microbiological assays such as Gram Stain, Endotoxin, Sterility, Microbial Identification, Growth Promotion, Bioburden and Plate Reading • Perform and review visual inspection of final product • Data entry and trend data as needed and prepare slides for management • Assist in investigations regarding out of specifications (OOS) results, address and manage deviations related to micro procedures. • Routine maintenance of lab equipment and lab spaces • Review and approve all final product release test results • Perform other duties as required Basic Qualifications: • AA Degree and 1+ years' experience in Microbiology lab/Environmental Monitoring OR • AA Degree and 2+ years' experience in Microbiology lab/Environmental Monitoring OR Preferred Qualifications: • Experience in the application of microbiological techniques such as environmental air monitoring, water testing, surface monitoring • Experience in aseptic techniques and clean room operations • Ability to gown for entry into Aseptic core and supporting areas, and lift approximately 25 lbs. • Ability to pass vision exam for visual inspection • Knowledge of GMP, SOPs and quality control processes for commercial manufacturing • Proficient in MS Word, Excel, Power Point and other applications • Excellent interpersonal, verbal and written communication skills are essential in this collaborative work environment • Comfortable in a fast-paced small company environment with minimal direction and able to adjust workload based upon changing priorities • Ability to be flexible with schedule, and work overtime as needed

Quality Control Associate, Microbiology & Environmental Monitoring Salary: 55,000 - 75,000 Annually Great opportunity to be part of a dedicated team serving the rapidly expanding gene therapy market. Vector Biomed is a leading supplier of high-quality Lentiviral vectors for research and clinical use. Team members will support cGMP manufacturing in a dynamic small company setting. We are seeking an enthusiastic person experienced in Microbiology and Environmental Monitoring (EM) practices to monitor and support critical manufacturing operations. Duties and Responsibilities: • Perform Environmental Monitoring (EM) and Quality Control (QC) microbiological testing to support cGMP manufacturing (MFG) operations. • Assist in the collection, analysis, and reporting of routine and dynamic EM data. • Assist/support development of new QC testing methods as required. • Adhere to quality standards for job training and ensure GMP compliance. Education & Experience: • Education (Any of): • Associates or Bachelor's degree in relevant field with at least 1 year in a microbiology/ environmental monitoring role. • High school degree with minimum 3 years relevant experience in a microbiology/ environmental monitoring role. • Proficient in routine sampling methods and data collection. • Proficient in data analysis. • Solid judgement and decision making in routine technical situations. Qualifications: • Experience with microbiological and aseptic techniques • Experience with standard laboratory/cleanroom equipment: biosafety cabinets, incubators, etc. • Comfortable working in both general laboratory and cleanroom / gowned setting. • Proficiency in Office365 (Word, Excel, PowerPoint, Teams, SharePoint, OneDrive) required. • Demonstrated team player with effective verbal and written communication skills. Physical Requirements: • Ability to move 20 lbs. required. • While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands; reach with hands and arms. • Must be able to perform repetitive motion activities during working hours. • Must be able to stand during working hours.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We are looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we 'II support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you 'II have the resources, support, and team to do some of the best work of your career. Start your future with a new mission, Northrop Grumman Mission Systems. Northrop Grumman Mission Systems, located in Sykesville, MD has an immediate need for a Quality Inspector. A Quality Inspector performs complete quality inspection operations on a variety of purchased or manufactured materials, hardware, electrical components, electro-mechanical assemblies/systems and manufacturing processes using drawings, military specifications, process specifications and contractual requirements as well as internal (PROP) procedures that are applicable. Roles and Responsibilities: Evaluate completed sub-assemblies or systems to determine the cause of defective appearance or malfunctions. Recommend design changes and other corrective actions and war room requests, working with Engineering to adhere to contractual and drawing requirements. Perform inspections using tooling and check lists for the complete inspection of sub-assemblies and systems. Interface with manufacturing operations and engineering personnel to improve processes and document issues. Conduct inspections of complex components to determine, from visual and dimensional checks, piece/part conditions that contribute to, or cause, defects. Conduct investigations to detect conditions affecting functional aspects of the system and recommend solutions to eliminate current and/or future malfunctions. Perform first-piece, patrol, sampling, physical configuration audit, and final inspection on a variety of complete electromechanical LRUs and systems. Visually inspect for appropriate electrical assembly specifications and standards. Determine and evaluate the cause of rejections and recommend changes in tooling/equipment, functions and/or materials to improve the quality of the completed product. Review procedures and techniques used to inspect materials, parts, units, and/or systems that improperly passed inspection, to make necessary corrections to prevent recurrence. Perform ISO Audits as required by audit coordinator after receiving certification. Submit contract end item product as required. Customer and government (DCMA) interface are required for in-process inspections through final inspections as well as contract end item submittals and final pack/shipping processes. This position requires a secret clearance as the work will be performed in a secure area. Basic Qualifications: High School Diploma and 2 years of related experience. Quality, inspection or electromechanical assembly experience. A Department of Defense (DoD) Secret clearance is required. U.S. citizenship required. Preferred Qualifications: SAP experience. Drawing review experience. Knowledge of geometric tolerancing. Primary Level Salary Range: $44,825.00 - $98,131.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Perform high quality inspections and market our inspection services to agents and the general public. Job Duties and Responsibilities (Essential Job Functions) * Perform high-quality residential home inspections * Utilize our mobile scheduling platform to set availability and check schedules * Use our amazing reporting software to perform on-site inspections and deliver reports same day * Participate in monthly team meetings, including marketing training * Work with Team Lead to market to offices and agents, e.g., sales meetings, lunch and learns * Collaborate with our marketing team, including email and social campaigns * Market our inspection services to audiences including agents and the general public * Distribute marketing collateral and information to potential customers * Help to cultivate a culture of excellence Performance Expectations * Meet all performance and behavior expectations outlined in the company performance appraisal form or communicated by management. * Perform responsibilities as directed achieving desired results within expected time frames and with a high degree of quality and professionalism. * Establish and maintain positive and productive work relationships with all staff, customers and business partners. * Demonstrate the behavioral and technical competencies necessary to effectively complete job responsibilities. Take personal initiative for technical and professional development. * Follow the company HR Policy, the Code of Business Conduct and all subsidiary and department policies and procedures, including protecting confidential company information, attending work punctually and regularly, and following good safety practices in all Qualifications Education: * Minimum high school diploma or the equivalent. Secondary education preferred. Experience: * Previous experience performing home inspections. Knowledge and Skills: * Keyboarding * Kind, honest, optimistic, respectful, non-alarmist * Like to meet people, work hard, and help your team Other (licenses, certifications, schedule flexibility/OT, travel, etc.): * Licensed in the state performing inspections. Must have license to perform home inspections, termite inspections and radon inspections. * Valid driver's license. Location: Hiring within the Delaware Shore area. We offer a full suite of benefits including Medical, Health Savings Account, Dental, Vision, Life Insurance, Paid Vacation (PTO), 401(k) with employer match, Flexible Spending Account, and Employee Assistance Program (EAP) Equal Opportunity Employer

Blue Halo is seeking a Receiving Inspector to become a part of a dynamic Quality team, reporting directly to the Quality Manager. This role is responsible for inspection at BlueHalo's Albuquerque site. The candidate will perform Inspection of purchased parts and materials for conformity to standards, specifications, and processing requirements as materials are received from external providers. This person shall determine or assist in determining methods, sequences, and procedures necessary for inspection. Works from released drawings, procedures, and specifications. Adapts inspection measuring devices and procedures where necessary. The candidate would be required to communicate between multiple departments and report key information to stakeholders in a timely manner. Must be dedicated to the quality function and possess a drive to enhance the quality of both the product and processes. Essential Functions: Good team player who can work efficiently with minimal supervision. Maintain a clean and organized workspace. Able to comply with all health, safety, and security regulations. Prioritize daily inspection requirements. Excellent attention to detail and critical thinking skills. Review and comprehend engineering and program requirements such as engineering drawings, models, and specifications, and perform inspections using tools such as micrometers, gauges, microscopes, micrometers, telescope gauges, and optical comparators. Verifies specifications referencing purchase orders, blueprints, drawing or inspection instructions, and checklists. Apply sampling principles to material inspections. Makes pass/fail decisions on inspected goods. Maintains records of results Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits. Prepare inspection reports regarding conformance, initiate nonconformance reports, and quarantine material when needed. Create discrepancy reports for suspect or identified counterfeit parts. Perform inspections per IPC-610/620. Perform First Article Inspections, incoming inspections, and final inspections. Assist with calibration of quality control equipment. Calibration Technician backup. Able to train a quality inspection level 1 and 2. Foreign object debris/damage point of contact. Run statistical studies such as reproducibility and capability. Familiar with statistical process control methodologies. Prepare and maintain test data for review. Identify areas for quality control improvements. On material returned from repair, confirm repairs and product quality. Minimum Qualifications Familiar with ISO and AS Quality Management Systems. Experience with inspection tools (calipers, micrometers, height gauge, etc.). Experience reading and understanding engineering drawings, aerospace certifications, and test reports. Experience receiving packages, data entry, organizing, and scanning documentation. Familiar with ESD and proper material handling procedures. Qualified candidates should possess a high school diploma or equivalent. Basic computer skills, including Microsoft Office applications. Technical Math Basic shop math Measurement systems (units and conversion) Numeric conversions (decimals, fractions, scientific notation) Physical Demands The employee must occasionally lift, carry, pull, push, or move up to 25 pounds unassisted. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Required Education and Experience High School Diploma or Equivalent. IPC-610-620 Certified or able to be re-certified. Preferred Education and Experience: 6+ years of inspection, precision, mechanical, or metrological inspection experience. Experience with the use of metrology tools and gauges. Experience within the aerospace, automotive, semiconductor, or electronic fields. Ability to read and interpret engineering drawings and specifications. Clearance Level No Clearance The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Zachary Piper Solutions is looking for a Quality Control Inspector to join a design services company for mission critical systems. This is a FULL TIME job and onsite in Jessup, MD. Essential Duties of the QC Inspector: * Contract document review for compliance: RFP, Specs, Drawings, Submittals, etc. * Review design documents for constructability and contract compliance. * Implement 3-Phase Quality Control approach: Preparatory meetings, Initial inspections, and follow-up inspections. * Participate in daily safety meetings to discuss Quality issues and concerns. * Attend all required project meetings to provide resolution to any Quality issues from Owner/QC. * Manage and assist in resolving all Quality or Commissioning punch-lists. Qualifications of the QC Inspector: * 4+ years of hands-on experience in construction, estimation, and/or quality control activities. * Current Journeyman License or ability to obtain within 6 months of hire. * Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards. * Experience with receiving, production, shipping and quality processes. Compensation for the QC Inspector: * $75,000 - $85,000 (based on experience) * Monthly cell phone allowance * Comprehensive benefit package; Cigna Medical, Cigna Dental, Vision, 401k w/ ADP, PTO, paid holidays, Sick Leave as required by law, paid holidays This job opens for applications on 1/5/2026. Applications for this job will be accepted for at least 30 days from the posting date. #LI-LS3 #LI-ONSITE Keywords: 401k, 401k match, pto, paid time off, holiday, medical, dental, health, culture, ts/sci, top secret, government clearance, security clearance, ssbi, secret clearance, dod clearance, department of defense, army, navy, military, marines, air force, electrician, electronics technician, electronics tech, cctv, closed circuit tv, closed-circuit tv, closed circuit television, closed-circuit television, cat5, cat 5, cat6, cat 6, ids, acs, Hirsch, identiv, bosch, radionics, radionic, bvms, alphone, intercom, airphone, fft, divar, installation, field operation, field engineer, site survey, field tech, field technician, jha, aha, pfw, safety plan, pitco, cabling, pulling cables, equipment rack, information technology, i.t., infralink, lenel, software house, intrusion detection system, access control, maglock, vms, tested wire, communication technician, communications technician, installation, retrofit, communication equipment, communications equipment, pulling cable, cable pulling, site surveys, copper, fiber optic, fiberoptic, fiber cable, optic cable, copper cable, ancillary communications, communication system, communications system, structured cable plant, bicsi, rated copper, optic cable, horizontal cabling, horizontal copper, cable testing, testing cable, anaerobic, fusion splicing, splicing, riser cable, outside plant, osp, osp installation, prefab, prefab assembly, conduit, floor sleeves, bluebeam, blue beam, fluke versiv, cat6a, cat 6a, cat5a, cat 5a, project manager, general contractor, program manager, superintendent, construction, construction manager, primavera, p6, primaverap6, primavera p6, bluebeam, deputy leader, telecom, telecom manager, telecommunications manager, telecom project, telecommunications project, pkom, ms project, Microsoft project, isp copper, distributed antenna system, cctv, outside plant, inside plant, isp, osp, fiber optic, structured cabling, budget, telecom systems, telecom system, telecommunications system, telecommunication system, financial management, project team, manpower, material budget, autocad, project documentation, cash flow, construction management, critical path method, cpm, cpm scheduling, general contractor schedules, telecom scope, telecommunication scopes, low-voltage, low volt, low voltage, quality control, quality assurance, quality control inspector, quality control specialist, quality assurance inspector, quality assurance specialist, qc specialist, qc inspector, construction inspector, qa specialist, qa inspector, electrician, master electrician, journeyman, journeyman electrician, journeyman license, master license, electrician master, electrician journeyman, rfp, request for proposal, inspection, installation checklist, quality issues, quality issue, bim models, bim model, building information modeling, building information, building info, building modeling, nec, national electrical code, neta, international electrical testing association, nec codes, neta codes, electrical standards, electrical regulations, quality control inspection, qc inspections, qc inspection, quality assurance inspections, quality assurance inspection, qa inspection, qa inspections

OUR COMPANY As a manufacturing firm, ACDi's biggest differentiator is our people. We're here to do more than simply build "widgets". Our people offer solutions to challenging design and product development issues and are passionate about hitting customer delivery schedules and exceeding expectations. We approach each project understanding that achieving the highest quality possible is required for every step of the electronics design, engineering, and manufacturing process. What we do day-in and day-out has a lasting, meaningful impact across many industries and in the lives of everyday people. At ACDi we create a seismic measuring system that prevents people from getting stuck in elevators during an earthquake; we defend our nation by helping to build gun turrets for tanks, communication systems for troops, and military avionics; we support NASA programs with communications systems that converse with launched vehicles. We approach each project understanding that achieving the highest quality possible is required for every step of the electronics manufacturing process, because these projects help keep our country and people around the world safe, secure, and free. At ACDi, we're more than just a contract manufacturer. POSITION SUMMARY The Quality Control Inspector - Receiving will perform inspection of electronic components and fabricated items such as sheet metal, injection molded plastic, printed circuit boards, etc., and hardware, as needed, to ensure compliance with quality standards and specifications. ESSENTIAL DUTIES & RESPONSBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Other duties may be assigned. ESSENTIAL DUTIES & RESPONSBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Other duties may be assigned. Perform inspections on products by confirming product meets applicable IPC-A-600 workmanship standards, internal requirements, and customer documents, such as assembly drawings and bill-of-materials (BOM). Conduct visual and measurement tests Document and communicate rejections of unacceptable items as required in a timely manner Maintain accurate records of inspections Generate interdepartmental forms/reports such as scrap reports, non-conformance reports and any other required quality records. Interact with the purchasing department regarding non-conforming product dispositions Assist with receiving and stockroom functions to include the receipt, stocking and pulling of material Other duties as assigned Qualifications SPECIFIC EDUCATIONAL/EXPERIENCE REQUIREMENTS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. High school diploma or general education (GED) is required 1-3 years of related inspection experience in a manufacturing environment is preferred REQUIRED/PREFERRED SKILLS Knowledge of ISO9001 or AS9100 quality management system is preferred Knowledge of IPC workmanship standards Strong verbal and written communication skills Ability to read and/or interpret rough schematics, complex drawings, wiring diagrams, verbal instructions, BOMs, and gerber files Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements are met Prior experience working with an ERP system is required, experience using Epicor is a plus Strong attention to detail is required PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; sit; and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. ENVIRONMENT CONDITIONS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee may be exposed to hazards (chemical, mechanical, and/or radiant energy). The employee may be required to wear protective clothing such as heel straps and a lab coat. The noise level in the work environment is usually moderate. All work will be performed indoors. ACDi is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by the law.

Job Title: Electrical Quality Control InspectorJob Description The Electrical Quality Control Inspector is responsible for planning, coordinating, and executing the commissioning process for data center facilities. The role ensures all systems operate as intended and meet design specifications. This position involves managing commissioning activities across electrical, mechanical, and control systems, ensuring compliance with industry standards, safety regulations, and client requirements. Responsibilities + Develop and manage commissioning plans, schedules, and procedures for data center projects. + Oversee functional testing of critical systems, including HVAC, electrical distribution, UPS, generators, fire suppression, and monitoring systems. + Ensure integration and interoperability of all systems prior to handover. + Collaborate with design engineers, construction teams, vendors, and clients to align commissioning activities with project timelines. + Conduct regular progress meetings and provide status updates to stakeholders. + Verify installation and performance against design specifications and operational requirements. + Ensure compliance with applicable codes, standards (ASHRAE, IEEE), and client-specific guidelines. + Prepare detailed commissioning reports, test results, and issue logs. + Maintain accurate records for turnover and future maintenance reference. + Identify potential risks during commissioning and implement mitigation strategies. + Ensure adherence to safety protocols and environmental regulations. Essential Skills + Data Center Experience + Commissioning Experience + Experience with Switchgears, UPS/ATS, Generators, and Chillers + Strong understanding of electrical and mechanical systems + Excellent project management and organizational skills + Ability to interpret technical drawings and specifications + Proficiency in commissioning software and tools Additional Skills & Qualifications + Bachelor's degree in Mechanical, Electrical, or Industrial Engineering (or related field) + 5+ years in commissioning, preferably in mission-critical facilities or data centers + Certified Commissioning Professional (CCP) + LEED Accredited Professional or equivalent project management certification Work Environment The position is based on a Data Center site in Manassas, VA. The role is a 6-month contract-to-hire opportunity, offering comprehensive benefits including Medical, Dental, Vision, and 401(k) options. Job Type & Location This is a Contract to Hire position based out of Ashburn, VA. Pay and Benefits The pay range for this position is $150000.00 - $175000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Ashburn,VA. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Paid time off Glenshaw, PA $18+ for entry level, $2/hr shift differential for 2nd shift work Shift Time: 12:30PM - 8:30PM Reports to: Quality Manager FLSA Status: Non-exempt, full-time hourly Health, Dental, Vision, PTO, 401k benefits! Job Summary: The Quality Inspector ensures that products and materials meet company and customer standards throughout the manufacturing process. This role involves inspecting products, conducting measurements, and collaborating with production teams to maintain quality control. Qualifications & Competencies: • High school diploma or general education degree (GED) required. • Strong understanding of basic math, measurement, and statistical concepts. • Ability to read and interpret quality standards and documentation. • Experience following quality procedures and legal/customer requirements. • Proficiency in Microsoft Office; ability to learn IQS software. • Strong attention to detail with the ability to follow verbal and written instructions. • Excellent communication and interpersonal skills. Essential Duties, Responsibilities (Other duties may be assigned): • Inspect in-process production using visual and measurement tests, ensuring specifications are met. • Perform first-piece sign-offs, spot audits, and final inspections. • Review customer quality requirements, including drawings, inspections, and reports. • Maintain and file retained production samples. • Conduct layered process audits, manufacturing process audits, and quality management system (QMS) audits. • Assist with Production Part Approval Process (PPAP) for automotive customers. • Support additional quality-related tasks as assigned. The physical requirements of this role include: • Ability to reach with hands and arms. • Occasionally stand, walk, climb, kneel, and crouch. • Lift/move up to 25 lbs regularly and up to 50 lbs occasionally (with assistance). • Must have close, distance, color, and peripheral vision, along with depth perception. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Compensation: $18.00 - $20.00 per hour About Us AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States. We have been providing IT solutions to customers from different industry sectors, helping them control costs and release internal resources to focus on strategic issues. AHU Technologies INC. was co-founded by visionary young techno-commercial entrepreneurs who remain as our principal consultants. Maintaining working relationships with a cadre of other highly skilled independent consultants, we have a growing number of resources available for development projects. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of aircraft maintenance experience. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Responsibilities This non-exempt position adheres to a Quality Control System, which complies with federal, state and local construction specifications for the asphalt plant products. Runs daily quality control tests to ensure compliance with specification of various projects and with federal, state and local regulations. Develops and adheres to all quality control procedures for the asphalt operations. Develops asphalt mix designs in accordance with project specifications. Coordinates quality control procedures on various projects with representatives of federal, state and local government agencies. Conducts various lab experiments on products using established scientific protocols. Coordinates with the asphalt plant control rooms regarding mix designs required by customers. Receives and analyzes product related technical data coming from external salespeople and technical representatives regarding production procedures. Preforms other job related duties as required or assigned. Opportunity for day work when alternating with other technicians during the paving season. Qualifications Bachelor's Degree or its equivalent in job experience is required in a scientific or engineering discipline. Minimum of 1-2 years experience; 3-5 years preferred. Knowledge of types of products and product components and the applicability of government regulation on product quality is necessary. Knowledge of lab scientific protocols is a must. Overview Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law. We can recommend jobs specifically for you! Click here to get started.

Thales Defense & Security, Inc. (TDSI) Headquartered in Clarksburg, MD, is a U.S. company that has been serving domestic and international defense Air, Land and Sea domains for 60 years. With over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI's key technologies include tactical handheld radios, expeditionary satellite terminals, helmet-mounted displays, optics and target recognition capability, advanced radars, undersea sensing and missile systems. Lives depend on what we do! Top Benefits (Subject to terms of applicable policies/plans) * Competitive Salary * Yearly Incentive Compensation Program * Medical insurance for self and eligible family members * Generous 401(k) program - up to 7% company contribution and 100% immediate vesting * Tuition Reimbursement * Paid wellness, vacation, and holiday leave * Paid maternity, paternity, and parental leave * 9/80 Work Schedule (every other Friday off) We currently have an opening for a Senior Quality Control Inspector - 1st or 2nd Shift in our Clarksburg, MD Campus. The Senior Quality Control Inspector will report to the Manager of Procurement Quality Assurance. First shift hours are 7:00 am to 4:30 pm. Second shift hours are 2:30 pm to 12:00 am. Second shift candidates must be able to train on first shift for 30 days. Responsibilities * Inspect electrical assemblies in accordance with IPC-A-610 and J-STD-001 standards. * Inspect mechanical assemblies in accordance with technical documentation. * Able to work unsupervised in performing inspections. * Read and interpret mechanical drawings. * Interface with the Enterprise Resource Planning system. * Communicate non-conforming material status. * Interface with Quality Engineering in support of problem resolution and continuous improvement. * Maintain high ethical standards, including compliance with all company procedures. Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * U.S. Citizenship required. - Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. * Excellent verbal and written communications - Fluent in English. * High school diploma required. * 4-8 plus years' experience in quality, manufacturing or related technical environment. * Experience in inspecting electrical / mechanical assemblies. * Knowledge of IPC standards. * IPC-A-610 and J-STD-001 certifications required. * Ability to read and understand technical data documentation. * Experience with ERP systems; SAP S/4 Hana a plus. * Computer literate. * Ability to comply with all Company guidelines, policies, procedures and embrace Company Core Values. The hourly pay range for this role is $23.40 - $29.90 USD along with a target incentive compensation plan (ICP) of 3%. The pay range provided is a good faith estimate representative of the experience level for the role described above. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. For specific questions about this job posting, candidates may contact talent acquisition at *********************. Thales Defense & Security, Inc. is committed to non-discrimination as applicable under federal, state and local laws. We are an E-Verify Employer. If you need an accommodation or assistance in order to apply for a position with Thales Defense & Security, Inc., please call Human Resources at ************. #LI-JK1 #LI-Onsite

Job Description Who Are We? At Parry Labs we believe the modern combat advantage relies on the speed and scale of open systems. We're redefining the edge of the increasingly ever-changing battlespace by delivering game changing capabilities to our warfighters through digital engineering, software, and hardware solutions that are essential to our core of being a Digital Systems Integrator. Born digital and agile, Parry Labs is building a winning team to be the premier provider for Next Generation Mission Systems Integration across air, land, sea, space and cyber. Are you ready to be an instrumental part of experts in the industry? Join us in the innovation of integration at Parry and apply to help develop the technologies of tomorrow while reaching new heights in your career today. About the Job The Quality Inspector ensures that all products and processes meet established quality standards, specifications, and compliance requirements. They are responsible for performing inspections at various stages of production, identifying defects or non-conformities, and documenting findings to drive continuous improvement. Collaborating closely with production teams, Quality Inspectors play a key role in maintaining product integrity, preventing errors, and ensuring customer satisfaction. This role requires a keen eye for detail, knowledge of quality standards, and the ability to follow procedures to identify and address issues efficiently. This is a six (6)-month contract position. Duties & Responsibilities Perform incoming / receiving inspections on all products to ensure that external, internal and dimensional aspects meet quality standards. Track work throughout the assembly lab, ensuring in process and final inspections are complete and proper documentation is completed. Adhere to calibrated tooling program by verifying all tools utilized in tasks are current and quarantining and submitting expired items for recalibration. Review processing and inspection data for completeness of operations, accuracy of data, traceability of product and materials, and disposition of non-conforming product. Assist with the implementation and maintenance of quality programs as required. Identify, quarantine and report any work that does not quality requirements. Assist with the tracking of non-conformance reports, and corrective / preventative actions. Collaborates with the quality and production departments to determine approaches and methods to improve overall quality of work. Interpret and check work instructions and assembly prints, both hard copy and digital for completeness and errors. Other duties as assigned. Required Qualifications 3+ years of QA Inspection experience, preferably on electro-mechanical assemblies. Able to read and understand mechanical and electrical drawings along with electronic circuit board assembly drawings and procedures. Good communication and interpersonal skills. Good or corrected eyesight for visual inspection. Organized work habits and attention to detail. Experience with working in an ESD environment. Experience with IPC-A-610, IPC-A-620 preferred. Experience with CostPoint ERP is a plus. Why Join Parry Labs? At Parry Labs, we foster a culture of curiosity and collaboration. Employees are given the autonomy to leverage their skills in creating state-of-the-art tech solutions that aid in the protection of the American Warfighter. We encourage new and bold ideas that push the status quo. It is this entrepreneurial spirit that drives us. Parry Labs will support you with workplace flexibility, a commitment to the health and well-being of you and your family and provide opportunities to work with a purpose. We are committed to supporting your success in both your professional and personal lives with benefits such as education assistance and unlimited paid time off, just to name a few. No One Has Time for Long Job Applications! We completely understand, that is why we have made the application process easy. We promise. This will be simple. Accessibility/Accommodation: If because of a medical condition or disability you need a reasonable accommodation for any part of the employment process, please send an e-mail to **************** or call ************** to let us know the nature of your request and contact information.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions INSPECTION TECHNICIAN I/II Based at Rocket Lab's site in Silver Spring, Maryland, the Inspection Technician will be responsible for executing various aerospace inspections. You will support the Quality Inspector Supervisor and Space Systems organization. In this role, you'll inspect mechanical and electrical components for spacecraft assemblies, operate precision tools like CMMs and micrometers, and assemble flight mechanisms using production drawings. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! (Please note: this position can be hired at the Inspection Technician I or Inspection Technician II level) WHAT YOU'LL GET TO DO: Inspect mechanical and electrical components before use in traceable spacecraft assemblies Use and maintenance of Coordinate Measurement Machines (CMM), calipers, micrometers, gages, comparators, hardness testers, and other common mechanical inspection tools. Create Standard Operating Procedures for specific mechanical parts. Communicate findings through written standardized documentation and verbal discussion. Assemble space flight mechanisms following written production drawings and procedures. Idea generation of potential process improvements. Shipping and receiving components according to standard company procedures. YOU'LL BRING THESE QUALIFICATIONS AS AN INPSECTION TECHNICIAN I: 2+ years of quality inspection experience in a highly regulated production or manufacturing environment Familiarity with common manufacturing processes. Familiarity with common aerospace inspection tools, e.g. calipers, multimeters, micrometers, gages, comparators, etc. Familiarity with common aerospace assembly tools, e.g. torque wrenches, force gages, load cells, scales, etc. YOU'LL BRING THESE QUALIFICATIONS AS AN INPSECTION TECHNICIAN II: 5+ years of quality inspection experience in a highly regulated production or manufacturing environment Familiarity with common manufacturing processes. Familiarity with common aerospace inspection tools, e.g. calipers, multimeters, micrometers, gages, comparators, etc. Familiarity with common aerospace assembly tools, e.g. torque wrenches, force gages, load cells, scales, etc. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: At least 8+ years engineering experience in the aerospace industry. Candidate has capacity to comply with the federally mandated requirements of U.S. export control laws. Direct inspection or design experience with parts complying to the ASME Y14.5 standard. Familiarity with use of CMM. Strong technical and mechanical capability. Familiarity with simple electrical schematics and components. Attention to detail necessary to verify inspected components meet required specifications. Integrity and focus to follow and execute procedures. Familiarity with common geometric dimensioning and tolerancing (GD&T) practices. Passion for doing excellent work with mechanisms and physical assemblies. Mechanically inclined and able to troubleshoot basic equipment issues Self-motivated mind-set. Effective verbal and written communication abilities. Desire to work in a small-company environment. ADDITIONAL REQUIREMENTS: Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces #RL1 Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored HSA plan option, dental and vision coverage, 3 weeks paid vacation and 7 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, flex schedule, free breakfast and lunch catered 2x/week, and free snacks/drinks. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (MD Only)$16-$25 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Title: Quality Control Technician I - QC Lab Support Contract Duration: 12 Months Day Shifts: 4/10 (4 days x 10 hours/day) Shift: Sunday - Wednesday. 7: 00-AM - 6: 00-PM Pay Range: $28.00 - $31.00 USD hourly on W2 Role: Execute tasks associated with sample management, shipment of samples, and other lab support QC functions, while interacting cross-functionally with personnel from other QC groups, Quality Assurance, Analytical Development, Manufacturing, Material Management (MM), and Corporate teams. Responsibilities (include but are not limited to): Receive incoming samples, verify documentation, and log sample information into LIMS. Execute processes to support sample receipt and processing or aliquoting for release/stability testing and retains. Label, store, and organize samples according to established procedures and storage requirements. Coordinate sample transfers to internal and external testing labs. Perform routine cleaning, maintenance, and restocking of sample storage areas. Collaborate with MM, QA, and other QC functions including Corporate QC to support requirements around sampling, testing, and disposition. Manage and complete all shipping activities within QC functions. Complete routine review of records, such as sample chain of custody forms, processing logs, logbooks, and other documentation generated within QC Lab Support. Assist with deviation and investigation activities as needed. Provide updates during daily and weekly meetings. Participate in Lean Lab and other Operational Excellence initiatives. Comply with all safety, quality, and regulatory guidelines. Perform other duties as assigned. Basic Qualifications: Bachelor s Degree OR AA Degree and 2+ years experience working in Quality Control or biopharma laboratories preferably in an FDA regulated laboratory OR High School Degree and 3+ years experience working in Quality Control or biopharma laboratories preferably in an FDA regulated laboratory. Preferred Qualifications: Strong knowledge in applying GMP in QC lab. Exceptional attention to detail and ability to keep track of multiple ongoing projects Proficient in Microsoft Office, Excel, Visio, and other related applications Excellent interpersonal, verbal and written communications skills which are essential in this collaborative work environment Comfortable in a fast-paces small company environment and able to adjust workload based on changing priorities. Ability to be flexible with schedule, and work overtime as needed

Job Title: Quality TechnicianLocation: Laurel MDJob Type: 3-6 month contract Industry: [Manufacturing/Electronics/Defense] Job Summary:We are seeking a detail-oriented and experienced Quality Technician to join our team. The ideal candidate will possess an IPC-A-610 or IPC/WHMA-A-620 certification and will have hands-on experience inspecting electronic assemblies to industry standards. Experience operating and programming CMMs using PC-DMIS or similar software is highly desirable. Key Responsibilities:Inspect electronic assemblies and cable/wire harnesses in accordance with IPC 610 or IPC 620 standards.Perform visual inspections for soldering, component placement, wiring, and mechanical integrity.Utilize inspection equipment including microscopes, calipers, micrometers, and gauges.Operate and/or program Coordinate Measuring Machines (CMM) using PC-DMIS or similar software (a plus).Maintain accurate inspection records, reports, and quality documentation.Assist in root cause analysis and corrective/preventive action implementation.Collaborate with production, engineering, and quality teams to identify and resolve quality issues.Ensure compliance with company and industry quality standards. Requirements:IPC-A-610 or IPC/WHMA-A-620 Certification (required).2+ years of experience in a quality assurance or inspection role within a manufacturing environment.Experience with electronic assemblies, PCBAs, or cable/wire harnesses.Familiarity with CMM operation and PC-DMIS programming (preferred but not required).Strong attention to detail and documentation accuracy.Ability to interpret technical drawings and inspection criteria.Excellent communication and problem-solving skills. Preferred Qualifications:Experience in ISO 9001, AS9100, or similar regulated environments.Knowledge of statistical process control (SPC) and quality tools (e.g., Pareto, Fishbone).Proficiency with MS Office Suite.

Blue Halo is seeking a Receiving Inspector to become a part of a dynamic Quality team, reporting directly to the Quality Manager. This role is responsible for inspection at BlueHalo's Albuquerque site. The candidate will perform Inspection of purchased parts and materials for conformity to standards, specifications, and processing requirements as materials are received from external providers. This person shall determine or assist in determining methods, sequences, and procedures necessary for inspection. Works from released drawings, procedures, and specifications. Adapts inspection measuring devices and procedures where necessary. The candidate would be required to communicate between multiple departments and report key information to stakeholders in a timely manner. Must be dedicated to the quality function and possess a drive to enhance the quality of both the product and processes. **Essential Functions:** + Good team player who can work efficiently with minimal supervision. + Maintain a clean and organized workspace. + Able to comply with all health, safety, and security regulations. + Prioritize daily inspection requirements. + Excellent attention to detail and critical thinking skills. + Review and comprehend engineering and program requirements such as engineering drawings, models, and specifications, and perform inspections using tools such as micrometers, gauges, microscopes, micrometers, telescope gauges, and optical comparators. + Verifies specifications referencing purchase orders, blueprints, drawing or inspection instructions, and checklists. + Apply sampling principles to material inspections. + Makes pass/fail decisions on inspected goods. Maintains records of results + Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits. + Prepare inspection reports regarding conformance, initiate nonconformance reports, and quarantine material when needed. + Create discrepancy reports for suspect or identified counterfeit parts. + Perform inspections per IPC-610/620. + Perform First Article Inspections, incoming inspections, and final inspections. + Assist with calibration of quality control equipment. + Calibration Technician backup. + Able to train a quality inspection level 1 and 2. + Foreign object debris/damage point of contact. + Run statistical studies such as reproducibility and capability. + Familiar with statistical process control methodologies. + Prepare and maintain test data for review. + Identify areas for quality control improvements. + On material returned from repair, confirm repairs and product quality. **Minimum Qualifications** + Familiar with ISO and AS Quality Management Systems. + Experience with inspection tools (calipers, micrometers, height gauge, etc.). + Experience reading and understanding engineering drawings, aerospace certifications, and test reports. + Experience receiving packages, data entry, organizing, and scanning documentation. + Familiar with ESD and proper material handling procedures. + Qualified candidates should possess a high school diploma or equivalent. + Basic computer skills, including Microsoft Office applications. + Technical Math + Basic shop math + Measurement systems (units and conversion) + Numeric conversions (decimals, fractions, scientific notation) **Physical Demands** The employee must occasionally lift, carry, pull, push, or move up to 25 pounds unassisted. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. **Required Education and Experience** + High School Diploma or Equivalent. + IPC-610-620 Certified or able to be re-certified. **Preferred Education and Experience:** + 6+ years of inspection, precision, mechanical, or metrological inspection experience. + Experience with the use of metrology tools and gauges. + Experience within the aerospace, automotive, semiconductor, or electronic fields. + Ability to read and interpret engineering drawings and specifications. **Clearance Level** No Clearance The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of aircraft maintenance experience. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .