Quality control inspector jobs in Saint Clair Shores, MI - 191 jobs

Cardinal Staffing is looking for 3 Quality Team Leads. Do you have an eye for detail and quality, are you a natural leader and enjoy traveling? If so, this may be the job for you! We have 3 shifts, (1st shift 6am-2pm, 2nd shift 2pm-10pm, and 3rd shift 10pm-6am). Monday-Friday with weekends. You must have flexibility to cover multiple locations between Auburn Hills and St Clair Shores and help cover different shifts. We are looking for someone that is Reliable, Responsible and Dependable. Pay is between $20-22/HR Job Description: * Inspect raw material and/or parts, audit production practices and processes, and report on non-conformances. • Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions • Segregate non-conforming parts or material • Complete required documentation for work performed • Perform data entry of work results into appropriate databases • Perform final inspection to reconcile outgoing shipments, as required • May be required to identify causes of non-conformance • Meet all TKMNA employee attributes and competencies Qualifications: Minimum Requirements: • High school diploma or equivalent • Ability to read and write English and perform basic math problems • Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) • Basic computer knowledge to complete data entry • Attention to detail and accuracy • Ability to accurately inspect basic material, commodities, and/or processes* Travel Preferred requirements: • Prior experience using basic measurement instruments • Prior experience in a quality assurance inspection position About Cardinal Staffing Services: At Cardinal Staffing, a Surestaff Company, we are dedicated to helping individuals unlock their career potential through meaningful job opportunities. As a leading staffing agency in the light industrial and manufacturing space, we pride ourselves on connecting talent with top employers across the Midwest. We understand that finding the right job is about more than just a paycheck - it's about finding the opportunity that fits your skills, goals, and lifestyle. Here are the benefits you'll enjoy when you partner with us: Access to a wide range of job opportunities Competitive pay Health and Wellness Programs (including EAP) Medical benefits including medical, vision, dental, and prescriptions Electronic weekly pay Employee Advocacy & Personalized Job Support Cardinal Staffing also follows all applicable state and local laws regarding sick time, paid time off, and retirement savings programs. Cardinal Staffing is an equal opportunity employer. Notice Regarding the Use of Artificial Intelligence in Employment DecisionsIn accordance with state mandates, we are providing this notice to inform all applicants and employees that artificial intelligence (AI) tools may be used at various stages of our employment processes. This may include recruitment, screening, hiring, promotion, or other employment?related evaluations.AI tools may assist in reviewing application materials, assessing qualifications, or supporting decision?making. These tools do not replace human judgment; rather, they are used to support consistent and efficient evaluation. Our commitment to speed-to-hire means we work efficiently to get you placed in the right role, fast. If you're ready to take control of your career, explore exciting opportunities, and gain experience that lasts, then Cardinal Staffing is the place for you. Let's get started today!#IND2

Delta does not provide immigration-related sponsorship for this role. do not apply for this role if you will need delta immigration sponsorship now or in the future. This includes direct company sponsorship, entry of Delta as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H-1 B, OPT, STEM OPT, CPT, TN, J-1, etc.). This position is for 2nd Shift 4:00 p.m. - 12:30 a.m. Delta Research an Aerospace company is an AS9100 and ISO9001 registered facility which manufactures Gear Products, Prototype/ Production, and Transmission Builds. In addition, we provide contract gear and CMM inspection services. We are also a NADCAP approved non-destructive testing facility and currently provide Magnetic Particle Inspection (MPI) and Nital Etch. Tasks: CMM Inspection - Support the Quality and Manufacturing departments with 1st Piece Inspection, In-Process Inspection and Final Inspection of finished parts. Use of manual handheld inspection tools such as micrometers, gages and other inspection equipment while CMM is running longer cycles times. Program next job(s) in line while CMM is checking parts. Perform layout inspections, first piece approvals, in-process inspections, and other aspects of inspection through-out the manufacturing process. Other quality related duties as assigned. Qualifications: Understanding of GD&T Prior CMM Operator Experience CMM Operator and / or Programming experience using Open DMIS. Experience in a job shop or a manufacturing environment. Knowledge of Inspection tools and best practices. Positive, can do, attitude with great attendance. Delta Gear and Delta Research are manufacturing facilities that produce Prototype, Development and Production gearing for the Aerospace, Defense and Electric Vehicle markets. All the Delta Family of Companies are Equal Opportunity Employers without regard to race, religion, color, national origin, age, sex, disability, or veteran status. The Delta Family of Companies offer competitive compensation packages, excellent Health Insurance, Prescription Drug Coverage, Dental, 401(k), and Vacation. Delta offers a clean, safe, state of the art, work environment. We also offer training and room for advancement. Applicants must be U.S. Citizens or have permanent Resident Status due to our ITAR business restrictions. Apply online today at: **************************

Quality Technician Opportunity! A local machining company with a facility in the Wixom, MI area, is currently looking to hire Quality Technicians for a Long-Term opportunities with their growing company. This is an excellent opportunity for those looking to work for a company that offers great benefits, stable employment and a great environment. The Quality Technician hourly rates are anticipated to start between $22 to $25 per hour based on each candidates experience and education. All well qualified candidates will be considered regardless of pay rate. Overtime is paid at premium rates over 40 hours. We offer excellent benefits including great medical, dental, 401k, and more. Qualified Quality Technician will have most, if not all, of the following skills and experience: 3+ years of RECENT experience in quality inspection in precision manufacturing. Proficient with precision measurement tools and CMM operation Able to read blueprints, understand GD&T, and shop math Perform part inspections with calipers, micrometers, and gauges. Able to pass standard pre-hire checks including background, drug screen, etc.

Ferndale Laboratories, Inc. is currently seeking a Incoming Quality Control Operator (IQC Operator). Day shift Monday-Friday, eligible for medical, dental, vision, paid holidays, vacation, weekly payroll and 401k plan with company match. *As a federal contractor, onboarding requires a pre-employment drug screen/physical (10-panel test including marijuana) and criminal background checks. The Incoming Quality Control Operator (IQC) is required to follow written procedures, current company policies and procedures, and current Good Manufacturing Practices (cGMPs). The jobholder is required to utilize these policies, procedures, and cGMPs to inspect and sample raw materials, components, and finished products. The jobholder is expected to immediately notify Quality Assurance management of any deviations the jobholder becomes aware of. The jobholder must be able to quickly and concisely relate inspection/sampling information, as the work performed by the jobholder directly impacts other departments. Quickly and accurately completes sampling and inspection activities of incoming raw materials, packaging components, finished products, bulk products and contracted manufactured products per written, approved specifications. Uses proper sampling techniques to sample raw materials for submission to the Quality Control Laboratory for testing. Must use aseptic sampling techniques to ensure samples/containers for microbial testing are not compromised. Must be able to handle inspection activities with the highest degree of accuracy. Assures proper safety techniques are used during sampling. Inspect FLI products for yearly review of product integrity. Determines sample quantities per written, approved procedures and pulls appropriate amounts for inspection. Uses handheld measuring devices such as rulers, calibers and must be proficient in basic mathematical techniques. Performs equipment and room inspections. Keeps IQC Supervision informed of any quality issues surrounding incoming raw materials, components and contract manufactured products. Maintains calibration schedules of scales, calipers, & gauges. Requirements Working knowledge of Food and Drug Administration (FDA), regulations and cGMPs. Must be familiar with American National Standard Z1.4 or equivalent sampling plans. Basic computer skills, including knowledge of word processing, spreadsheet and database management. Self -motivated, detail oriented and accurate with good written and verbal communication skills. Valid drivers license. Proficiency in basic mathematical techniques. Experience with hand-held measuring devices, such as rulers, calipers, etc.; sampling devices; pallet jack and scales. Ability to lift approximately 50 lb. manually, be able to move raw material/component pallets using a pallet jack, move full drums using a drum dolly and use a drum roller. Sampling activities may require standing for prolonged periods of time, and the use of respirators. Supports schedule commitments with minimum supervision through organizing and planning work assignments and teamwork. High School diploma or equivalent. Experience in Pharmaceutical or related industry experience helpful. Demonstrated strong mathematical skills. EO Employer E-verify Participant.

Thorlabs is pleased to play a role in advancing science through the components, instruments, and systems we design and manufacture. We believe that science and innovation have great potential to improve the world around us and are committed to advancing photonics (i.e., light-based) technologies that positively impact our customers, employees, and communities. Via educational outreach and more sustainable business practices, we continuously invest in a brighter future. We recognize that each of our employees is a unique individual with the ability to contribute to our success and seek to find great people who will thrive in our fun, fast-paced culture. This is a position at the Thorlabs Ultrafast Optoelectronics (UFO) division in Ann Arbor, MI. The Quality Control Inspector is responsible for inspecting raw materials and precision components from suppliers to ensure compliance with Thorlabs' quality standards and engineering specifications before they enter the production process. This position will also perform quality inspections on outgoing finished products and assist with incoming and outgoing RMA items. This role plays a critical part in maintaining product quality and vendor compliance within a high-precision manufacturing environment. Essential Job Functions include the following, but are not limited to: • Perform visual, functional, and dimensional inspections on electrical, mechanical and optical components using tools such as (e.g., microscope, calipers, micrometers, gauges). • Verify parts against engineering drawings, specifications, and tolerances. • Accurately document inspection results and maintain quality records. • Make quick, accurate pass/fail decisions on a wide variety of precision parts. • Communicate effectively with engineering, procurement, and production teams regarding nonconforming materials. • Work with RMA coordinator on incoming and outgoing RMA items. • Perform quality inspections on outgoing finished goods. • Support continuous improvement and corrective action activities related to supplier quality. • Must maintain a safe and clean working environment through compliance with procedures, policies and regulations In addition to the essential functions and duties listed above, all positions are also responsible for: • Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work-related tasks in a manner that is in compliance with all Company policies and procedures. • Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. The Company retains the right to change or assign other duties to this position. Physical Activities: Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of jobrelated equipment and tools. Requirements Qualifications Experience: • Entry level to 2 years' experience in a manufacturing or inspection environment. Education: • High School Diploma or equivalent or equivalent work experience Specialized Knowledge and Skills: • Experience with mechanical inspection or precision manufacturing preferred. • Familiarity with measurement tools and inspection techniques. • Strong attention to detail and ability to interpret technical drawings. • Excellent organizational and communication skills. • Ability to learn, understand, and effectively apply sampling plans. • Skilled in the usage of handheld measuring tools and devices including but not limited to microscopes, calipers and micrometers. • Good verbal and written communication skills to operate in both individual and team environments. • Capable of reading mechanical drawings and interpreting dimensional tolerances. • Adaptable to process and procedure changes. • Ability to meet department standards for productivity and quality. • Must have the ability to cross train on all areas of the department, including but not limited to visual and dimensional inspection, data entry, and mechanical assembly. • High attention to detail. The hourly rate for this position is $20.40- $25.25 D.O.E. Thorlabs values its diverse environment and is proud to be an Equal Employment Opportunity/Affirmative Action employer. All qualified individuals will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law Benefits Thorlabs offers a complete benefits package that includes medical, dental and vision insurance, company paid life insurance, a generous PTO package, a 401(k) plan, and tuition reimbursement just to name a few.

Quality Inspector - Metal Parts (Tier 1 Automotive Stamping) Auburn Hills: 6:00am-4:30pm - $17/hr Job SummaryThe Quality Inspector is responsible for inspecting stamped metal automotive parts to ensure they meet customer specifications and company quality standards. This role supports production by identifying defects, documenting findings, and maintaining a safe and organized work environment. Key Responsibilities Perform visual and dimensional inspections of stamped metal parts Use gauges, calipers, check fixtures, and other measurement tools Follow quality standards, work instructions, and inspection criteria Record inspection results and complete required documentation Communicate defects or nonconformities to production and leadership Support containment, rework, and sorting activities as needed Maintain a clean, safe work area and follow all safety procedures Qualifications Previous manufacturing or quality experience preferred Ability to read and understand basic work instructions Comfortable standing for long periods and lifting up to 25 lbs Long term contract to hire

Job Description Prestige Stamping LLC Quality Control Inspector Midnight Shift: 11:00 PM to 7:00 AM The Quality Inspector is responsible for ensuring the quality of parts from initial inspection through to final shipment. Key Responsibilities: Perform First Piece Inspection (dimensional and visual layout) Conduct Hourly Inspections to ensure each press is checked regularly Perform Final Hopper Inspections, checking for dirt and foreign parts Carry out Final Job Inspections Verify information on hopper tags at the start and end of each run Assist production teams with problem-solving Report any non-conformances to the Quality Manager or Supervisor File paperwork, including inspection sheets, certifications, and related documents Document inspection results into ERP system and/or inspection check sheets as required. Follow all safety standards and company policies Job Requirements: Must be at least 18 years old. Ability to read basic measuring tools (micrometer, calipers, dial indicator) Input necessary information related to product quality into ERP system. Strong communication skills both written and verbal Ability to work well in a team environment Basic understanding of shop math Physical ability to lift up to 50 lbs and pass a physical exam What we offer: Paid holidays (no waiting period) and vacation pay. Attendance award days. 401k with a generous company match. Comprehensive insurance coverage: Blue Cross Blue Shield Medical/Prescription, Delta Dental, and EyeMed Vision.

DEPARTMENT: AbilityOne- Detroit Arsenal SUPERVISOR: Director, Contracts Gesher Human Services is a bridge to hope and opportunity for people at work, at home, and in the community. Gesher's workforce development, behavioral health, and inclusion programming serves all Metro Detroiters while meeting the needs of the Jewish community. GENERAL Perform daily quality inspections of contracted areas inside the Detroit Arsenal as well as identify potential and actual problem areas in the provided contracted services. Measures and updates quality standards as needed to ensure compliance with current contract. QUALIFICATIONS Required: High school diploma or equivalent. Other: Three to four years of janitorial experience with a documented work history performing custodial services preferred. Demonstrated experience in the performance of quality control Ability to work with individuals with disabilities Interpersonal skills sufficient to establish and maintain productive relationships that emphasize a customer focus as well as communicate effectively with participants, staff, government officials and public. Composition skills sufficient to prepare required reports Basic proficiency in Microsoft Word. Must be able to obit Department of Defense Security Clearance. Must be able to provide immunization records for Mumps, Measles, Rubella (MMR vaccine); Tetanus, Diphtheria, Polio (Tdap Vaccine) Hepatitis B; Varicella (Chicken Pox); and TB Skin test. Valid Michigan Drive License and a driving record must meet safe standards as established by Agency insurance carrier. DUTIES AND RESPONSIBILITIES Develop, implement and maintain complete quality control program (QCP) to assure the requirements of the contract as specified, including a documentation system of the inspections, results and actions. Identifies potential and actual problem areas in providing and contracted services. Perform daily quality inspections of contracted areas. Measures and updates quality standards as needed to ensure compliance with contracts Meets with government officials as deemed appropriate by the officials to discuss quality inspections and discrepancies. WORKING CONDITIONS Ability to work flexible hours, including early morning shift (5:30am-9:30am) Work involves the ability to obtain clearance to work on work on federal government contracts Ability to push and lift equipment, office furniture, and accessories weighing up to 50 pounds Work involves the ability to stoop and bend for up to four hours a day. NON-EXEMPT This position is non-exempt and eligible for overtime pay in accordance with the Federal Fair Labor Standards Act. The above is for general informational purposes only and is not intended to be all inclusive or limiting as to specific duties. The Agency reserves the right to modify, interpret, or apply this in any way the Agency desires and in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying the position. The described job requirements are subject to change to reasonably accommodate qualified individuals with a disability. This job description is not an employment contract, implied or otherwise and any employment relationship remains “at-will.” Gesher is proud to be an equal employment opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran or disability status, or any other applicable characteristics protected by law.

DEPARTMENT: AbilityOne- Detroit Arsenal SUPERVISOR: Director, Contracts Gesher Human Services is a bridge to hope and opportunity for people at work, at home, and in the community. Gesher's workforce development, behavioral health, and inclusion programming serves all Metro Detroiters while meeting the needs of the Jewish community. GENERAL Perform daily quality inspections of contracted areas inside the Detroit Arsenal as well as identify potential and actual problem areas in the provided contracted services. Measures and updates quality standards as needed to ensure compliance with current contract. QUALIFICATIONS Required: High school diploma or equivalent. Other: Three to four years of janitorial experience with a documented work history performing custodial services preferred. Demonstrated experience in the performance of quality control Ability to work with individuals with disabilities Interpersonal skills sufficient to establish and maintain productive relationships that emphasize a customer focus as well as communicate effectively with participants, staff, government officials and public. Composition skills sufficient to prepare required reports Basic proficiency in Microsoft Word. Must be able to obit Department of Defense Security Clearance. Must be able to provide immunization records for Mumps, Measles, Rubella (MMR vaccine); Tetanus, Diphtheria, Polio (Tdap Vaccine) Hepatitis B; Varicella (Chicken Pox); and TB Skin test. Valid Michigan Drive License and a driving record must meet safe standards as established by Agency insurance carrier. DUTIES AND RESPONSIBILITIES Develop, implement and maintain complete quality control program (QCP) to assure the requirements of the contract as specified, including a documentation system of the inspections, results and actions. Identifies potential and actual problem areas in providing and contracted services. Perform daily quality inspections of contracted areas. Measures and updates quality standards as needed to ensure compliance with contracts Meets with government officials as deemed appropriate by the officials to discuss quality inspections and discrepancies. WORKING CONDITIONS Ability to work flexible hours, including early morning shift (5:30am-9:30am) Work involves the ability to obtain clearance to work on work on federal government contracts Ability to push and lift equipment, office furniture, and accessories weighing up to 50 pounds Work involves the ability to stoop and bend for up to four hours a day. NON-EXEMPT This position is non-exempt and eligible for overtime pay in accordance with the Federal Fair Labor Standards Act. The above is for general informational purposes only and is not intended to be all inclusive or limiting as to specific duties. The Agency reserves the right to modify, interpret, or apply this in any way the Agency desires and in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying the position. The described job requirements are subject to change to reasonably accommodate qualified individuals with a disability. This job description is not an employment contract, implied or otherwise and any employment relationship remains “at-will.” Gesher is proud to be an equal employment opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran or disability status, or any other applicable characteristics protected by law.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Company parties Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Requirements and responsibilities: -Minimum 2 years of Quality Control experience required -Very proficient with measuring devices (calipers, micrometers, drop gages, pin gages, go & no-go gages, etc) -Familiar with GD&T drawing symbols and blueprint interpretation -Familiar with Quality Management Systems, including ISO 9001 -Experience with SPC (statistical process controls), data entry, control charting and understanding of trends -Must be highly quality conscious, detail oriented -Strong computer skills, including proficiency with MS Excel, Word and PowerPoint -Follow specific work, process, safety instructions and procedures -Able to complete control charts and process paperwork correctly and efficiently -Able to generate documented reports as required -Able to follow tasked to completion as directed by Quality Manager -Good communication skills and team mentality -Exhibit strong work ethic and attendance record -Forklift experience may be required

VQQ Inc is looking for QC inspector for each shift: days, afternoon and the night shift at its project site/s in MI and/or MO state.. The candidate should be: Responsible to do sorting/ inspection of automotive parts as a third party as per work instructions. Unpack the parts and repack the parts after inspection into its original packaging. Be familiar with automotive inspection/sorting methods and handheld measuring devices e.g., Ruler, tape, vernier caliper. micrometer etc. Rework parts as directed with handheld shop tools /devices/ machines (e.g. cutting, drilling, sanding, trimming, grinding, gluing, etc.); Be able to stand, work on production line, move, work in vehicles shipping yard, bend, lift (part weight varies) Able to read/speak and write in English language and follow all work instructions, visual aids/pictures, procedures, and policies as applicable. Be able to use handheld computer PC devices, tablets, scanners etc.

Available Shift: 1st Shift: 6:00 a.m. - 3:30 p.m. 2nd Shift: 3:30 pm. - 1:00 a.m. There is opportunity for growth; top performers who are interested in developing their skills are eligible for advanced positions at the six-month mark. Eligibility is based on attendance and performance. Job Summary: We are an automotive supplier seeking self-motivated, reliable, hard-working, and detail-oriented entry level quality inspectors for the end of line inspection. Duties and Responsibilities: Perform a full range of varied inspection tasks including visual and touch point inspection Inspect parts with fast pace precision ensuring there are no defects Document inspection results using logs and reports Ability to identify bad product from good Must demonstrate attention to detail as well as excellent listening skills Inspector must be able to utilize basic reading and writing skills Requirements Job Requirements: Strong problem-solving abilities Great attendance record Ability to work and communicate well with others Willing to perform repetitive tasks for extended periods standing up to 10 hours per day The health and safety of our candidates and employees is our top priority. We require that everyone in the building is always wearing a mask and we do a temperature check before candidates enter the building. We also check employee's temperatures every day before each shift.

Primary Responsibilities: * Ensure that all product meets or exceeds customer specifications. * Ensure allocation is followed, validate correct product is pulled and shipped to customer. * Assist Quality Control Inspection Supervisor to ensure that all product inspections are being performed, labeling specification are adhered to, and non-conformance product is pulled and corrected. * Flex Between the shipping dock, receiving dock and production to assist Quality Control Inspection Supervisor with Quality issues and/or inspections. * Report any exceptions to the customer specifications to Quality Control Inspection Supervisor. * Send out Quality Issues Emails for Non-Compliant Product. * Oversee floor operations when the Quality Control Inspection Supervisor is unavailable. * Remember recent rejections and rejection trends. * Ensure Product packaging is in presentable condition for our customers. * Ensure Presentation is of highest standards. * Performs any other Quality Control related tasks or special projects as assigned. * Provide training when required. FULL TIME Night Shift - Thursday- Saturday, alternating Wednesdays. 6:00 p.m. - 6:00 a.m. Training will be on our B1 shift Thursday-Saturday alternating Wednesday 6:00 a.m. - 6:00 p.m. Education/Background Requirements: * 1 Year College degree or 6 Months year of experience in a related field required. * Previous experience in produce industry preferred. Specific Knowledge, Skills and Abilities Required * Must pass Background Check and pre-employment Skills Testing. * Must sign a confidentiality agreement upon hire. * Must be a self-starter and willing to work flexible hours. * Proficiency in use of English language with the ability to communicate effectively and professionally. * Proficient in computer-use skills (MS Office: Word, Excel and PowerPoint). * Strong organizational, analytical and problem-solving skills. Need to be creative, adaptable and able to accurately work with a sense of urgency. * Spanish as a second language would be an asset. * Inspection/audit experiences, working in software applications are considered assets. * Proficient in basic computer skills, JDA or NAV experience preferred. * Ability to use and read measuring devices such as scales, calipers, ruler. * Excellent communication and interpersonal skills. Working Conditions: * Environment includes an expansive refrigerated warehouse, where the temperatures range is 45-55 degrees (except office areas). The background noise approaches 70 dcbs. * Must be capable of lifting up to 35 lbs.

Primary Responsibilities: • Ensure that all product meets or exceeds customer specifications. • Ensure allocation is followed, validate correct product is pulled and shipped to customer. • Assist Quality Control Inspection Supervisor to ensure that all product inspections are being performed, labeling specification are adhered to, and non-conformance product is pulled and corrected. • Flex Between the shipping dock, receiving dock and production to assist Quality Control Inspection Supervisor with Quality issues and/or inspections. • Report any exceptions to the customer specifications to Quality Control Inspection Supervisor. • Send out Quality Issues Emails for Non-Compliant Product. • Oversee floor operations when the Quality Control Inspection Supervisor is unavailable. • Remember recent rejections and rejection trends. • Ensure Product packaging is in presentable condition for our customers. • Ensure Presentation is of highest standards. • Performs any other Quality Control related tasks or special projects as assigned. • Provide training when required. FULL TIME Night Shift - Thursday- Saturday, alternating Wednesdays. 6:00 p.m. - 6:00 a.m. Training will be on our B1 shift Thursday-Saturday alternating Wednesday 6:00 a.m. - 6:00 p.m. Education/Background Requirements: • 1 Year College degree or 6 Months year of experience in a related field required. • Previous experience in produce industry preferred. Specific Knowledge, Skills and Abilities Required • Must pass Background Check and pre-employment Skills Testing. • Must sign a confidentiality agreement upon hire. • Must be a self-starter and willing to work flexible hours. • Proficiency in use of English language with the ability to communicate effectively and professionally. • Proficient in computer-use skills (MS Office: Word, Excel and PowerPoint). • Strong organizational, analytical and problem-solving skills. Need to be creative, adaptable and able to accurately work with a sense of urgency. • Spanish as a second language would be an asset. • Inspection/audit experiences, working in software applications are considered assets. • Proficient in basic computer skills, JDA or NAV experience preferred. • Ability to use and read measuring devices such as scales, calipers, ruler. • Excellent communication and interpersonal skills. Working Conditions: • Environment includes an expansive refrigerated warehouse, where the temperatures range is 45-55 degrees (except office areas). The background noise approaches 70 dcbs. • Must be capable of lifting up to 35 lbs.

Job DescriptionDescription: Ferndale Laboratories, Inc. is currently seeking a Incoming Quality Control Operator (IQC Operator). Day shift Monday-Friday, eligible for medical, dental, vision, paid holidays, vacation, weekly payroll and 401k plan with company match. *As a federal contractor, onboarding requires a pre-employment drug screen/physical (10-panel test including marijuana) and criminal background checks. The Incoming Quality Control Operator (IQC) is required to follow written procedures, current company policies and procedures, and current Good Manufacturing Practices (cGMPs). The jobholder is required to utilize these policies, procedures, and cGMPs to inspect and sample raw materials, components, and finished products. The jobholder is expected to immediately notify Quality Assurance management of any deviations the jobholder becomes aware of. The jobholder must be able to quickly and concisely relate inspection/sampling information, as the work performed by the jobholder directly impacts other departments. Quickly and accurately completes sampling and inspection activities of incoming raw materials, packaging components, finished products, bulk products and contracted manufactured products per written, approved specifications. Uses proper sampling techniques to sample raw materials for submission to the Quality Control Laboratory for testing. Must use aseptic sampling techniques to ensure samples/containers for microbial testing are not compromised. Must be able to handle inspection activities with the highest degree of accuracy. Assures proper safety techniques are used during sampling. Inspect FLI products for yearly review of product integrity. Determines sample quantities per written, approved procedures and pulls appropriate amounts for inspection. Uses handheld measuring devices such as rulers, calibers and must be proficient in basic mathematical techniques. Performs equipment and room inspections. Keeps IQC Supervision informed of any quality issues surrounding incoming raw materials, components and contract manufactured products. Maintains calibration schedules of scales, calipers, & gauges. Requirements: Working knowledge of Food and Drug Administration (FDA), regulations and cGMPs. Must be familiar with American National Standard Z1.4 or equivalent sampling plans. Basic computer skills, including knowledge of word processing, spreadsheet and database management. Self -motivated, detail oriented and accurate with good written and verbal communication skills. Valid drivers license. Proficiency in basic mathematical techniques. Experience with hand-held measuring devices, such as rulers, calipers, etc.; sampling devices; pallet jack and scales. Ability to lift approximately 50 lb. manually, be able to move raw material/component pallets using a pallet jack, move full drums using a drum dolly and use a drum roller. Sampling activities may require standing for prolonged periods of time, and the use of respirators. Supports schedule commitments with minimum supervision through organizing and planning work assignments and teamwork. High School diploma or equivalent. Experience in Pharmaceutical or related industry experience helpful. Demonstrated strong mathematical skills. EO Employer E-verify Participant.

Thorlabs is pleased to play a role in advancing science through the components, instruments, and systems we design and manufacture. We believe that science and innovation have great potential to improve the world around us and are committed to advancing photonics (i.e., light-based) technologies that positively impact our customers, employees, and communities. Via educational outreach and more sustainable business practices, we continuously invest in a brighter future. We recognize that each of our employees is a unique individual with the ability to contribute to our success and seek to find great people who will thrive in our fun, fast-paced culture. This is a position at the Thorlabs Ultrafast Optoelectronics (UFO) division in Ann Arbor, MI. The Quality Control Inspector is responsible for inspecting raw materials and precision components from suppliers to ensure compliance with Thorlabs' quality standards and engineering specifications before they enter the production process. This position will also perform quality inspections on outgoing finished products and assist with incoming and outgoing RMA items. This role plays a critical part in maintaining product quality and vendor compliance within a high-precision manufacturing environment. Essential Job Functions include the following, but are not limited to: * Perform visual, functional, and dimensional inspections on electrical, mechanical and optical components using tools such as (e.g., microscope, calipers, micrometers, gauges). * Verify parts against engineering drawings, specifications, and tolerances. * Accurately document inspection results and maintain quality records. * Make quick, accurate pass/fail decisions on a wide variety of precision parts. * Communicate effectively with engineering, procurement, and production teams regarding nonconforming materials. * Work with RMA coordinator on incoming and outgoing RMA items. * Perform quality inspections on outgoing finished goods. * Support continuous improvement and corrective action activities related to supplier quality. * Must maintain a safe and clean working environment through compliance with procedures, policies and regulations In addition to the essential functions and duties listed above, all positions are also responsible for: * Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work-related tasks in a manner that is in compliance with all Company policies and procedures. * Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. The Company retains the right to change or assign other duties to this position. Physical Activities: Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of jobrelated equipment and tools. Qualifications Experience: * Entry level to 2 years' experience in a manufacturing or inspection environment. Education: * High School Diploma or equivalent or equivalent work experience Specialized Knowledge and Skills: * Experience with mechanical inspection or precision manufacturing preferred. * Familiarity with measurement tools and inspection techniques. * Strong attention to detail and ability to interpret technical drawings. * Excellent organizational and communication skills. * Ability to learn, understand, and effectively apply sampling plans. * Skilled in the usage of handheld measuring tools and devices including but not limited to microscopes, calipers and micrometers. * Good verbal and written communication skills to operate in both individual and team environments. * Capable of reading mechanical drawings and interpreting dimensional tolerances. * Adaptable to process and procedure changes. * Ability to meet department standards for productivity and quality. * Must have the ability to cross train on all areas of the department, including but not limited to visual and dimensional inspection, data entry, and mechanical assembly. * High attention to detail. The hourly rate for this position is $20.40- $25.25 D.O.E. Thorlabs values its diverse environment and is proud to be an Equal Employment Opportunity/Affirmative Action employer. All qualified individuals will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law Thorlabs offers a complete benefits package that includes medical, dental and vision insurance, company paid life insurance, a generous PTO package, a 401(k) plan, and tuition reimbursement just to name a few.

DEPARTMENT: AbilityOne- Detroit Arsenal SUPERVISOR: Director, Contracts Gesher Human Services is a bridge to hope and opportunity for people at work, at home, and in the community. Gesher's workforce development, behavioral health, and inclusion programming serves all Metro Detroiters while meeting the needs of the Jewish community. GENERAL Perform daily quality inspections of contracted areas inside the Detroit Arsenal as well as identify potential and actual problem areas in the provided contracted services. Measures and updates quality standards as needed to ensure compliance with current contract. QUALIFICATIONS Required: High school diploma or equivalent. Other: Three to four years of janitorial experience with a documented work history performing custodial services preferred. Demonstrated experience in the performance of quality control Ability to work with individuals with disabilities Interpersonal skills sufficient to establish and maintain productive relationships that emphasize a customer focus as well as communicate effectively with participants, staff, government officials and public. Composition skills sufficient to prepare required reports Basic proficiency in Microsoft Word. Must be able to obit Department of Defense Security Clearance. Must be able to provide immunization records for Mumps, Measles, Rubella (MMR vaccine); Tetanus, Diphtheria, Polio (Tdap Vaccine) Hepatitis B; Varicella (Chicken Pox); and TB Skin test. Valid Michigan Drive License and a driving record must meet safe standards as established by Agency insurance carrier. DUTIES AND RESPONSIBILITIES Develop, implement and maintain complete quality control program (QCP) to assure the requirements of the contract as specified, including a documentation system of the inspections, results and actions. Identifies potential and actual problem areas in providing and contracted services. Perform daily quality inspections of contracted areas. Measures and updates quality standards as needed to ensure compliance with contracts Meets with government officials as deemed appropriate by the officials to discuss quality inspections and discrepancies. WORKING CONDITIONS Ability to work flexible hours, including early morning shift (5:30am-9:30am) Work involves the ability to obtain clearance to work on work on federal government contracts Ability to push and lift equipment, office furniture, and accessories weighing up to 50 pounds Work involves the ability to stoop and bend for up to four hours a day. NON-EXEMPT This position is non-exempt and eligible for overtime pay in accordance with the Federal Fair Labor Standards Act. The above is for general informational purposes only and is not intended to be all inclusive or limiting as to specific duties. The Agency reserves the right to modify, interpret, or apply this in any way the Agency desires and in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying the position. The described job requirements are subject to change to reasonably accommodate qualified individuals with a disability. This job description is not an employment contract, implied or otherwise and any employment relationship remains “at-will.” Gesher is proud to be an equal employment opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran or disability status, or any other applicable characteristics protected by law.

Quality InspectorTaylor, MI Company is a fabrication facility Shift: 1st shift: 7am to 3:30pm Monday-Friday w/ some OT on Saturday Must train on the 2nd shift 3p to 11:30p Pay: Up to $20/hr based on experience Essential Job Duties:Inspect parts for quality Inspected parts must meet QC and customer specifications. Must know how to read calipers and micrometers Reading blueprints is a plus Will have a quantity of parts expected to be inspected on each shift Other duties assigned by manager Safety Requirements Safety glasses Hearing protection if needed No loose fitting clothes Jewerly is not permitted Lots of opportunity for growth within the company. Contract to hire position

Job Description Available Shift: 1st Shift: 6:00 a.m. - 3:30 p.m. 2nd Shift: 3:30 pm. - 1:00 a.m. There is opportunity for growth; top performers who are interested in developing their skills are eligible for advanced positions at the six-month mark. Eligibility is based on attendance and performance. Job Summary: We are an automotive supplier seeking self-motivated, reliable, hard-working, and detail-oriented entry level quality inspectors for the end of line inspection. Duties and Responsibilities: Perform a full range of varied inspection tasks including visual and touch point inspection Inspect parts with fast pace precision ensuring there are no defects Document inspection results using logs and reports Ability to identify bad product from good Must demonstrate attention to detail as well as excellent listening skills Inspector must be able to utilize basic reading and writing skills Requirements Job Requirements: Strong problem-solving abilities Great attendance record Ability to work and communicate well with others Willing to perform repetitive tasks for extended periods standing up to 10 hours per day The health and safety of our candidates and employees is our top priority. We require that everyone in the building is always wearing a mask and we do a temperature check before candidates enter the building. We also check employee's temperatures every day before each shift.