Quality control inspector jobs in San Angelo, TX - 1,688 jobs

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

Apave America offers an employee-centric company culture, competitive pay, and opportunities to build a rewarding career full of growth & advancement. The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. Conduct Inspections and Assessments Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage. Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks). Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). Prepare Inspection Reports Document findings from inspections, including any defects or non-conformities. Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions. Maintain records for future reference and regulatory compliance. Risk Assessment and Analysis Identify potential risks and hazards based on inspection findings. Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity. Assess the remaining life of equipment and suggest maintenance schedules to prevent failures. Non-Destructive Testing (NDT) Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects. Interpret NDT results and provide recommendations based on the findings. Regulatory Compliance and Safety Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols. Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards. Stay current with changes in regulations and industry practices. Collaboration and Communication Work with engineers, maintenance teams, and management to develop inspection schedules and action plans. Provide technical advice and guidance on repair and maintenance strategies. Communicate with contractors and third-party vendors regarding inspection requirements and results. Monitoring and Continuous Improvement Track and monitor equipment performance over time and report any changes or declines in condition. Recommend or implement improvements in inspection processes, techniques, or technologies to enhance efficiency and safety. Certification and Training Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies. Ensure that work is done in a manner that complies with both company procedures and industry best practices. Quality Assurance Ensure that inspections are carried out according to established quality assurance standards and practices. Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: High School Diploma or equivalent is required. Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required. Minimum of API 510 and 570 certifications are required. Additional API 653 certification will be considered an asset. Certifications in NDT methods (MT/PT/UTT) would be considered an asset. Valid Driver's License and pre-access drug and alcohol testing required. Pre-employment background checks will be required. Work Conditions: Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders Working in a plant and/or shop area around production machinery with extreme noise levels Work from various levels of heights and/or confined spaces for long periods of time Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: Ability to lift, move, and carry objects weighing 75lbs. or greater Must be able to walk, sit, stand, bend, reach, and climb Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping Working extended hours and standing for extended periods of time Work in indoor and outdoor environments in conditions of extreme heat and/or cold Work in and near industrial hazards Must be able to walk and climb except when performing non-field duties Remain consistently active throughout shift Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations Must be able to wear safety equipment as required by the safety department for personal protection (PPE) Ability to maintain focus and multitask effectively Exhibit sensible and responsible behavior Ability to work autonomously or within a team environment NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. *** Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. *** We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

We Are Artificial Lift. It's what we do. All day. Everyday. Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it. We are seeking a QUALITY ASSURANCE INSPECTOR (2nd Shift) to become an integral part of our team! This position is located in FORT WORTH, TEXAS. Job Summary : Preserve the quality standards of products by the inspection of incoming materials, in-process work, finished products, and recording the quality results Responsibilities may include, but are not limited to: Read blueprints and use inspection equipment Inspect, test, or measure materials or products being produced (primarily machined parts) Inspection and measuring equipment calibration duties (machine shop related equipment) Develop and conduct various inspections on inbound materials from suppliers and outbound internally made products (machined parts and assemblies) Ensure that the quality check procedure in place are followed during every manufacturing phase Create comprehensive documentation for quality issues and document the corrective actions that were taken Educate the manufacturing team on quality control issues and work with departmental supervisors to improve overall product quality Create process checklists and coordinate quality inspections with departmental supervisors Required : High School Diploma/GED Required : 2-year minimum QA experience Preferred : 5-year minimum QA experience Preferred : Valid & Current CWI certification (welding inspection) Preferred : Valid & Current CWI certification (welding inspection) Preferred : Oil & Gas product/material/manufacturing industry experience Preferred : Experience with component/assembly inspection Must be able to lift up to 75lbs Must be able to stand for 8+ hours per shift Must be able to read, give, and take direction in English Must be able to work full time and have great attendance Must pass drug screen & background check Must have excellent communication skills Must be detailed oriented, have basic math skills and computer skills Must have a courteous and positive attitude, also have a sense of urgency, drive, pride, and desire to succeed Will be working in a shop environment Well versed at analyzing information, reporting investigation results, and have solid documentation skills Performs tasks associated with the quality control inspection of various products while meeting productivity, quality, safety, behavioral, and attendance expectations Experience with inspecting parts made in a machine shop and the typical inspection equipment typically used to inspect machined parts. 3+ experience using CMM machine is a plus. NO RECRUITERS/HEADHUNTERS/STAFFING AGENCIES Unsolicited emails or calls will not be read or returned

We are looking for a Quality Control Lead Inspector for one of our top clients in Fort Worth, TX. . Bilingual in English and Spanish is required. Hours: First Shift. Compensation: $22.00 per hour Responsibilities: Supervise, train, and mentor a team of garment inspectors, ensuring they perform their duties efficiently and accurately. Oversee the inspection process, ensuring that garments meet the required specifications for quality. Identify any defects or issues with garments and work with PI teams to resolve them promptly. Maintain accurate records of inspection results, defects, and corrective actions taken. Ensure all inspections are conducted in accordance with established quality standards and company expectations. Collaborate with the production and WH teams to address quality concerns and implement solutions. Identify and escalate any significant quality issues or potential risks to immediate supervisor / manager. Participate in continuous improvement initiatives to enhance the inspection process and overall product quality. Requirements: Prior experience as a Garment Inspector, Quality Control Inspector, or similar role in the garment manufacturing industry required. Bilingual in English and Spanish required. Experience in textile factories or weaving companies required. Strong knowledge of garment production processes and quality standards. Proven leadership and team management skills. Excellent analytical and problem-solving abilities. Basic computer skills for record-keeping and reporting (Words, Excel, Power Point).

Position requires candidates to be U.S. person as defined in ITAR, 22CFR 120.15 (U.S. Citizenship or Resident Alien Status) Amphenol Fiber Systems International (AFSI) is a full service fiber optic company specializing in the fabrication an manufacture of fiber optic connectivity products and systems. Our commitment to technical excellence makes us an industry leader in demonstrating sophisticated products and professional technical assistance in the fiber optic industry. AFSI, located in Allen, Texas, has and will continue to base its strategy on technical and application support, quality assurance, product performance and value. GENERAL DESCRIPTION: The Mechanical Quality Control Inspector is responsible for verifying detailed machined detailed parts meet engineering drawing requirements. Shift time 6:00 am - 3:00 pm ESSENTIAL FUNCTIONS: Perform precision measurements on machined piece parts while exercising an understanding of Geometric Dimensioning and Tolerancing (GD & T). Perform layout mechanical inspections from machine shops. Ability to use calibrated hand tools and ring and plug gages and other standard measuring instruments like calipers, micrometers, height gages, surface plates, and other mechanical measuring instruments. Ability to read and interpret engineering drawings and blueprints. Ability to read and interpret customer and internal drawings. Ability to identify and document nonconformances, as required REQUIRED SKILLS, KNOWLEDGE, and ABILITIES: Demonstrated ability to use hand tools like calipers, micrometers, ring gages, plug gages, CMM, Keyence and other standard measuring instruments. Ability to read and interpret engineering drawings and blueprints. Possess strong process-based skills. Excellent written and verbal communication skills. Solid understanding of technical and computer skills with the ability to navigate within the customer order database. Basic math (geometry) skills Interface with engineering and manufacturing staff in resolving quality issues. Strong time management skillset; detail oriented. Team player. Shift time 6:00 am - 3:00 pm REQUIRED EDUCATION and EXPERIENCE: HS diploma or equivalent (college degree, a plus) Experience with quality control techniques Experience with measuring SMIs (calipers, gauges, rulers, meters, height gages, and other measuring instruments). Minimum of 2 years of quality inspector experience Amphenol Fiber Systems International complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the La

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* **Job Function:** Quality **Job Sub** **Function:** Quality Control **Job Category:** Business Enablement/Support **All Job Posting Locations:** San Angelo, Texas, United States of America **Job Description:** **About MedTech** Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech We are searching for the best talent for a **Technician, Quality Control** to be in **San Angelo** **,** **TX** **.** **Purpose:** Responsible for conducting complex test and analysis to assure that product comply with established specifications. **What you will** **be responsible for** **:** + Carries out routine calculations and prepares documentation that shows the results for test performed. + Responsible for ensuring personal and Company compliance with all Federal, State, local and Company regulations, policies, and procedures + Performs other duties assigned by Laboratory Management + Assuresoptimumcontrol of quality so that raw material and/or finished products conform to existing requirements, standard operation procedures, and governmental regulations and adheres to all Quality Systems Requirements (QSR) and ISO standards. + Execute simple microbiology analyses in-process sample and finish products (Microbial count, EnvironmentalMonitoringand sterility test) tocomply withcurrent procedures and Pharmacopoeias. + Basic knowledgeon microbiology principles, theories,practicesandmethodology. + Completesrecord of inspection results, acceptance,rejectionand disposition for entry into logbooks or computer systems (i.e.LIMS, Empower,etc). + Supportprocess improvement teams for departmental and company continuous improvement activities (Lean, compliance laboratory processes, etc.) + Responsibleto ensure adequate systematic control of nonconformingproduct. + Participates on special requests for product testing, such as qualification protocols + Ensures proper safety and environmental procedures and practices are utilized + Complywithall applicable quality managementsystem, environmental, safety and occupational health policies. (for example, ISO 13485, ISO14001 & OSHAS18001). + The San Angelo Plant is a 24/7 operation; weekends and holidays are included in the work schedule **Qualifications / Requirements:** **Required:** + High School/Secondary Education or Equivalent (preferably school coursework in mathematics or Science)required. + 0-2 years of relevant experience in training position is preferred **Preferred:** + Good interpersonal relations and communication skillsrequired + Knowledge of Microsoft Office, LIMS, Empower and other computer software recommended + Demonstrated knowledge andexpertisein quality processes and regulatory requirements. + Experience working in an FDA regulated environment preferred (21 CFR Part 211 and 211, 21 Part 820, ICH Q7 and/or 21 CFR Part 4) + Basic wet chemistry techniques related to qualitative and quantitative + Mustbe flexible with a variety of working situations and schedules. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson and Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, please email the Employee Health Support Center (********************************) or contact AskGS to be directed to your accommodation resource. \#LI-Onsite **Required Skills:** **Preferred Skills:**

Oversees logs and procedures and ensures Q.C. and Production are abiding by GMP and GLP company rules set forth by company SOPs. Ensuring things are made right in the first place is the best way of preventing out of specification products. ESSENTIAL DUTIES AND RESPONSIBILITIES: Includes the following, but other duties may be assigned as the company's needs dictate. Reviews and approves the Production filling batch records. Checks and audits the documents for accuracy and GMP compliance during and at the completion of filling. Checks and confirms that the correct components and compounding batch have been set-up and are being used on the appropriate packaging line. Reviews the data reported by the mechanics, machine operators, and line leads to ensure that the information is correct and entered appropriately. Responsible for placing compounded batches and finished goods that do not conform to company specifications into Quarantine status with applicable labeling. Reports any quality issues to Quality management and participates in investigations, as necessary. Performs daily housekeeping audits of the Production area logbooks and reports results to Quality management. Supports GMP training of employees. Participates in Quality System audits as directed by Quality management. Complies with Health, Safety, and Environmental responsibilities for the position. Inspects the production lines to ensure that both Production and Quality control personnel are following the required SOP to perform their jobs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or GED (general education degree) and some college (science-based courses preferred). Minimum 6-months of hands-on experience as Quality audit/inspector in cGMP environment; preferably in pharmaceutical, biomedical, or medical device field (regulated industry). Experience with batch record keeping, CAPA initiation, and deviation investigation. Should have experience working on the floor of a manufacturing facility. LANGUAGE SKILLS: Fluent in reading, writing, and speaking the English language, as well as having experience with technical writing (knowing Spanish is a plus). Ability to read, analyze, and interpret professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from departmental manager/supervisor or other employees. MATHEMATICAL SKILLS: Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. COMPUTER SKILLS: To perform this job successfully, an individual should have knowledge of Database software, Spreadsheet software and Word Processing software. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to stand, walk, talk or hear, and taste and smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles (herbal powders). The noise level in the work environment is usually quiet. Sunrider Manufacturing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: Quality Job Sub Function: Quality Control Job Category: Business Enablement/Support All Job Posting Locations: San Angelo, Texas, United States of America Job Description: About MedTech Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech We are searching for the best talent for a Technician, Quality Control to be in San Angelo, TX. Purpose: Responsible for conducting complex test and analysis to assure that product comply with established specifications. What you will be responsible for: Carries out routine calculations and prepares documentation that shows the results for test performed. Responsible for ensuring personal and Company compliance with all Federal, State, local and Company regulations, policies, and procedures Performs other duties assigned by Laboratory Management Assures optimum control of quality so that raw material and/or finished products conform to existing requirements, standard operation procedures, and governmental regulations and adheres to all Quality Systems Requirements (QSR) and ISO standards. Execute simple microbiology analyses in-process sample and finish products (Microbial count, Environmental Monitoring and sterility test) to comply with current procedures and Pharmacopoeias. Basic knowledge on microbiology principles, theories, practices and methodology. Completes record of inspection results, acceptance, rejection and disposition for entry into logbooks or computer systems (i.e. LIMS, Empower, etc). Support process improvement teams for departmental and company continuous improvement activities (Lean, compliance laboratory processes, etc.) Responsible to ensure adequate systematic control of nonconforming product. Participates on special requests for product testing, such as qualification protocols Ensures proper safety and environmental procedures and practices are utilized Comply with all applicable quality management system, environmental, safety and occupational health policies. (for example, ISO 13485, ISO14001 & OSHAS18001). The San Angelo Plant is a 24/7 operation; weekends and holidays are included in the work schedule Qualifications / Requirements: Required: High School/Secondary Education or Equivalent (preferably school coursework in mathematics or Science) required. 0-2 years of relevant experience in training position is preferred Preferred: Good interpersonal relations and communication skills required Knowledge of Microsoft Office, LIMS, Empower and other computer software recommended Demonstrated knowledge and expertise in quality processes and regulatory requirements. Experience working in an FDA regulated environment preferred (21 CFR Part 211 and 211, 21 Part 820, ICH Q7 and/or 21 CFR Part 4) Basic wet chemistry techniques related to qualitative and quantitative Must be flexible with a variety of working situations and schedules. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson and Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, please email the Employee Health Support Center (********************************) or contact AskGS to be directed to your accommodation resource. #LI-Onsite Required Skills: Preferred Skills:

Site Safety and Health Officer/Quality Control (SSHO/QC) The SSHO/QC is responsible for managing the daily QC responsibilities of specific projects to ensure the project is constructed in accordance with the established standards. The role will include direct oversight and review of the entire project from design to completion. The CQCM will work closely with project managers, construction superintendents, the client's representative on site, and other key personnel. This position also has the overall responsibility to implement safety, health and environmental programs and procedures within the worksite in pursuit of a zero-incident culture. Maintain best practices designed to enhance and improve regulatory compliance, as well as minimize industrial injuries/illness, workers' compensation costs, property damage and other general liability losses. Responsibilities Participate in the Post Award Kick-off, Partnering, Preconstruction, Design Development, and Coordination and Mutual Understanding Meetings. Implement the "Three Phase of Control" plan. Ensure that no construction begins before the DOR has finalized the design for that segment of work, and construction submittals are approved as required. Inspect all work and rework, using International Conference of Building Officials certified QC specialists as applicable, to ensure its compliance with contract requirements. Maintain a rework log. Immediately stop any segment of work, which does not comply with the contract requirements and direct the removal and replacement of any defective work. Prepare daily QC reports. Ensure that Contractor Production Reports are prepared daily and align with the daily QC reports. Hold weekly QC meetings with the Commissioning Authority, DOR (or representative), Superintendent and the Contracting Officer/CE on site; participation shall be suitable for the phase of work. Ensure that design and construction submittals are reviewed and approved, as required by the contract, prior to allowing material on site and work to proceed with these items Maintain a submittal register Update As-built drawing daily, maintaining up-to-date set on site. Maintain a testing plan and log. Certify and sign statement on each invoice that all work to be paid under the invoice has been completed in accordance with contract requirements. Perform punch-out and participate in Pre-final and Final Acceptance Inspections. Submit list of deficiencies to the Contracting Officer for each inspection. Correct all deficiencies prior to the Final inspection. Notify Contracting Officer prior to final inspection to establish a schedule a date acceptable by the Contracting Officer. Ensure that all required key, operation and maintenance manuals, warranty certificates, and the As-built drawings are correct and complete, in accordance with the contract, and submitted to the Contracting Officer. Assure that all applicable tests special inspections, and observations required by the contract are performed. Coordinate all factory and on-site testing, Testing Laboratory personnel, QC Specialists, and any other inspection and testing personnel required by this Contract. Notify the Contracting Officer of any proposed changes to the QC plan. Retain a copy of approved submittals at project site, including Contractor's copy of approved samples. Update the Performance Assessment Plan as described in the UFGS section 01 31 19.05 20 POST AWARD MEETINGS and discuss monthly at QC meeting. Coordinate training of Government maintenance personnel with the eOMSI Preparer to assure training materials and training classes are accurate and provide instruction and documentation on critical elements of the products, materials, and systems in the constructed facility. Create and implement the requirements of the Health and Safety Plan (HASP or APP Accident Prevention Plan) Evaluate personnel performing tasks Determine that all personnel are properly trained, qualified, equipped, and physically protected from the site and operational hazards. Effectively implement LPS's site specific safety and health program Initiate and authorize a "Stop Work" order for any imminent S&H concerns; Lead daily safety meetings Conduct and document site training related to site-specific hazards Specify proper levels of PPE, per the requirements of the HASP In conjunction with the Site Supervisor, investigate and report in a timely manner any injuries, illnesses, accidents, incidents, or near misses, and ensure that proper procedures are followed through the investigation Conduct visitor orientation, daily safety inspections, and weekly safety audits. Properly complete the requisite safety and health related forms to capture required safety and health data. Provide the Site Supervisor with task hazard data for any new tasks or any tasks that significantly change during the conduct of site operations Assess each task and assess the effective implementation of the safety and health provisions required by the HASP Skills and Qualifications Bachelor's Degree in Engineering, architecture, or construction management and 5 years QCM experience on USACE, NAVFAC, DoE, or DoD projects (10 years' experience as QCM will be considered in lieu of education). Complete the course entitled "Construction Quality Management (CQM) for Contractors" and maintain a current certificate. Familiar with requirements of USACE EM 385-1-1, and experience in the areas of Activity Hazard Analysis (AHA), Accident Prevention Plans (APP) and safety compliance. 3-5 years of experience as a SSHO to include industrial, construction safety, and environmental protection. 30 Hr. Construction Safety Course with required yearly professional development hours CPR/FA training Understanding of FAR/DFAR requirements. Must possess and retain a valid driver's license Must be able to acquire and retain valid base access (if applicable) Must be able to pass a Federal Background Check Supervisory Responsibilities none Classification This is a full-time exempt position that reports to the Project Manager. Physical Demands Individuals must have the ability to lift 30 pounds. Must be able to remain in a stationary position at least 50% of workday and capability to move within the field. Any person in this position needs the ability to operate any field equipment used within the Construction Industry. There is a requirement to traverse multiple terrain types in outdoor weather conditions along with the ability to position self in a stoop, kneel, or crouch position. Individuals must be able to wear full construction PPE and have ability to enter confined spaces.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: * 2+ years of hands-on programming experience preferred * Ability to write and understand machine code preferred * Inventory experience * Be comfortable in a fast-paced environment * Some experience with CAD/CAM software, such as Autodesk Fusion * Strong communication and documentation skills, with the ability to communicate with machinists on machine processes * Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) * Mathematically inclined RESPONSIBILITIES: * Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. * Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. * Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. * Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. * Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. * Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. * Help complete program changes/transfers when CNC Programmer needs support. * Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: * Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a part time petroleum inspector, to join our Caleb Brett team, working Onsite from El Paso, TX. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The full time time petroleum inspector is responsible for volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, etc. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Full Time plus the availability to work on-call hours What you'll do: Understand and adhere to Caleb Brett safety procedures. Seal Tanker Trucks at 3rd party terminals. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Perform routine equipment calibrations, verification and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records and equipment in a clean, organized and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Ability to perform visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. Ability to complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Ability to perform routine equipment calibrations, verification and function checks. Ability to verify and communicate the results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Model Intertek's 10X Energies at all times within the work place, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to travel as business needs dictate. Physical requirements to include: Lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving. Preferred Requirements & Qualifications: IFIA certified is a plus! TWIC is a plus!

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job Description Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR BD1YIQjck4

Reputable Oil & Gas Consulting company specializing in asset performance management and engineering analyses is seeking a Mechanical Integrity Inspector to join their growing team and perform API inspections on Mechanical Integrity/RBI projects. Job Description Position Summary The Mechanical Integrity Inspector will work cross functionally with Engineering, Operations, and Maintenance teams. This position would report to the Mechanical Integrity Team Leader. This position would be responsible for API inspections and provide oversight of RBMI programs for purposes of recommending and approving repairs or certifying compliance in accordance with API standards and other industry rules and regulations. for purposes of recommending and approving repairs or certifying compliance. Duties and Responsibilities: The successful candidate will perform the following duties and responsibilities: • Maintain a safe, secure and healthy environment by adhering to Company and Customer safety standards and practices and to legal regulations, alerting of regarding potential hazards or concerns. • Perform internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of fixed equipment and piping in accordance with API 510, API 570, and API Risk-Based Inspection (RBI) • Data entry into the Risk Based Mechanical Integrity (RBMI) database as well as develop. • Provide oversight and make recommendations in matters related to the RBMI program. • Conduct Nondestructive examination (NDE) inspections as needed. • Scoping, performing and/or coordinating turnaround inspection activities. • Write detailed inspection and turnaround reports, and maintains documentation of inspection activities. • Communicate and deal with customers and other parties in such a manner as to benefit the professional reputation of the company. Qualifications Requirements: • 10+ years' experience in Mechanical Integrity Inspection • API 510 Certification (additional desired Certifications: API 570, 653 and 580) • Knowledge of NDE testing including PT, UT, MT. • Ability to obtain a TWIC card • Must be willing to travel (approximately 50% or more) Physical Requirements: • Ability to lift and carry up to 50 pounds • Ability to climb stairs and ladders, work in confined space and work at heights exceeding 100 ft. • Must be able and willing to work outdoors in all types of weather Additional Information All your information will be kept confidential according to EEO guidelines. Candidate must be US Citizen or Greencard holder

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.