Quality control inspector jobs in Santa Maria, CA

Gavial Engineering & Manufacturing specializes in the manufacturing of high-quality, high-reliability parts and systems. With a wide range of manufacturing, engineering and project management capabilities, Gavial supplies mission-critical equipment to industries that require the highest level of workmanship and quality. Gavial and its employees are dedicated to delivering the highest level of quality and service to its customers. The Gavial team draws upon decades of experience and knowledge to build high-quality, high-reliability parts and systems for some of the most demanding industries. We apply our Quality Assurance Program to strong processes, industry knowledge and dedicated people to deliver quality products on time. Quality Inspector Job Summary: The Quality Inspector is responsible for ensuring that raw materials and finished products meet established quality standards. This role involves inspecting, testing, sorting, sampling, or weighing components - whether raw, machined, fabricated, or assembled - to identify defects, wear, or deviations from specifications. The inspector may utilize precision measuring instruments and basic testing equipment to verify compliance and maintain product integrity. Buyer Essential Duties and Responsibilities: Examines parts for surface defects such as chips, scratches and pinholes. Compares surface finish of work-piece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish. Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Substitutes known values, such as dimensions from blueprints, into standard formulas and solves for unknown quantities to determine dimensions not specified in blueprints. Analyzes and interprets blueprints, data, manuals, and other materials to determine specifications, inspection procedures, and measuring instruments required. Plans and sets up inspections related to receiving, in-process and final inspections of assemblies, sub-assemblies, final units and piece parts per customer requirements. Measures dimensions such as length, height, hole locations and distance between reference points to ensure product meets specifications. Locates reference points on part and measures dimensions such as angle, arc, and radii to ensure product meets specifications. Performs first article inspections to AS9102 specifications. Performs mechanical inspections using surface plate set-ups, dial indicators, fixed gauges, height gauges, hardness testers, torque testers, and using measuring instruments such as rulers, calipers, gauges, and micrometers. Compares colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards. Computes defect percentages or averages, using formulas and calculators, and prepare reports of inspection or test findings. Records inspection data on inspection reports and enters inspection results into inventory management software. Generates non-conformance reports (NCRs) when parts are found to be defective. Ensures product is properly identified with inspection status and traceability information. Analyzes data, making computations as necessary, to determine the acceptability of inspection results. Examines layout and installation of wiring, cables, subassemblies, hardware and components to detect assembly errors. Compares assembly with drawings and parts list to detect missing hardware. Examines electrical terminations (crimps, solder connections, etc.) and compares them to established workmanship standards (familiar with IPC-A-610, IPC-WHMA-620) Examines production documents to ensure that all assembly, inspection, and testing steps were performed according to specifications. Stacks and arranges inspected products for further processing, shipping, or packaging and transport products to other workstations as necessary. Performs final inspections and supports in-house customer source inspections. Generates and prepares QA records packages to be sent to customer prior to and after shipments. Maintains manufacturing, inspections and test records generated during receipt, fabrication and assembly of material, parts and assemblies. Maintains inspection, measuring and test equipment through a calibration recall program. Skills Required: Analytical mindset with excellent attention to detail and troubleshooting ability. Good time management skills required. Effective written and verbal communication skills. Proficiency in Microsoft Office Suite (email, Excel, Word). Experience with ERP system (inventory/manufacturing software). Education/Experience: High School Diploma or equivalent required. Minimum 1 year of inspection-related experience in a manufacturing environment; 3 years' experience preferred. Use of precision measuring tools (calipers, micrometers, gauges) Knowledge of quality standards (AS9100) IPC-A-610 Inspector Certified a plus Benefits: Medical, Dental, and Vision insurance 401(k) and employer match Health Savings Account (HSA) Employer paid Life insurance Employee assistance program Paid Time Off (PTO) Floating Holidays To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Gavial Engineering & Manufacturing is an equal opportunity employer.

**Job details** **General information** **Entity** Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience. **Reference number** 2025-167024 **Job details** **Domain** Production **Job field / Job profile** Quality - Quality management **Job title** Quality Inspector 2 M/F **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** - Performs first article inspection (FAI) of newly designed or revised products. - Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured. - Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment. - Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. **But what else? (advantages, specificities, etc.)** Inspects, audits and reports on materials, processes and products used in the construction of aircraft interiors using variable or attribute measuring instruments and techniques to ensure conformance with the company's quality standards. **Candidate skills & requirements** Education: High school diploma or equivalent. Experience: 4-7 years. Computer Skill: Familiar with Windows Operating System . Basic skills with Microsoft office systems. Other Skills: Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred. Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc. Identify problems with some solving capabilities. **Annual salary** $34,320 - $50,850 USD **Job location** **Job location** North America, United States, California **City (-ies)** 2641 Airpark Drive CA 93455 Santa Maria **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** More than 5 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Job Description Quality Assurance Technician Are you Quality Assurance Technician who is looking for a great opportunity in San Luis Obispo? ESAero is a growing aerospace company in the San Luis Obispo area and provides services which include but are not limited to rapid system development, on-demand niche engineering, hands-on development/testing, and small UAS aerospace system manufacturing. Job Summary: Empirical Systems Aerospace, Inc. is seeking a full-time Quality Technician for our Quality Team to support the quality requirements of incoming and outgoing material and products. Responsibilities and Duties: Perform inspections of materials, purchased parts, and internally made parts. Document all inspections results using visual, dimensional methods and standards on company documentation forms. Review specifications and drawings to understand the product requirements. Reject incoming materials that fail to meet quality expectations and report the issue to the concerned department. Communicate and help resolve quality-related issues while adhering to project deadlines. Assist in developing inspection standards and processes. Assist with the coordination of calibrated equipment. Recommend improvement measures to processes to ensure quality control standards are met. Generate Nonconformance Reports or Corrective Actions when required. Assist with updates to the Quality Management System and participate in internal and external audits. Work with multiple departments to support production and increase awareness of quality requirements. Basic Qualifications/Requirements: US Citizen Proficiency and experience with measuring equipment such as calipers, micrometers, and dial indicators Technical hands-on capability with attention to detail. Ability to read and interpret engineering drawings 3+ years of experience Desired Skills/Experience: ISO 9001/AS 9100D J-STD-001 and/or WHMA/IPC-A-620Machining experience Experience with composites fabrication Experience with aircraft avionics Technical Writing: Build guides, schematics, wiring diagrams, reporting/reviewing, etc. Experience with parts and inventory management Benefits and Perks Health/Dental/Vision/Life Insurance PTO Paid Holidays (9) Retirement: 401k w/company match Casual dress code, Free snacks Amazing location to live, work, and play ESAero is an equal opportunity employer. E-Verify participation required for employment. Must present proof of authorization to work in the United States Must be able to pass background check SALARY RANGE: $25-$35/hr DOE Powered by JazzHR 3vo2eoMCWM

FLSA STATUS: Non-exempt SALARY RANGE: The anticipated salary range for this role is $20 to $33 per hour. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate's qualifications, experience, geographical location, and internal alignment. SUMMARY As a Quality Inspector, you will play a critical role in ensuring the delivery of high-quality UAS/UAV products by conducting inspections and tests on components, subassemblies, and finished products. Your meticulousness, adherence to quality standards, and strong attention to detail will contribute to our commitment to excellence and customer satisfaction. RESPONSIBILITIES The following job functions are a basic requirement. You may be tasked with other duties as . Perform inspections on assemblies and subassemblies at multiple stages of the production process including in-process and final. Perform receiving inspection to ensure vendor compliance with quality assurance standards and applicable specifications. Perform and support first article inspection as . Read and interpret released drawings, engineering change documents, assembly and inspection instructions. Use standard electrical and mechanical inspection tools such as microscopes, calipers, mechanical gauges and other measuring devices. Identify, document, and process non-conforming material in accordance with prescribed procedures. Identify production or test anomalies and support resolution. Communicate and support resolution of quality-related issues. Perform internal audits of specific areas, processes and procedures as . Maintain accurate records of accepted / rejected material; maintain databases for analysis of non-conformities. Compliance with calibrated tool controls. All other responsibilities as assigned REQUIRED QUALIFICATIONS The following are a non-exhaustive list of qualifications for the position: High school diploma or higher Knowledge of ESD requirements and practices Knowledge of quality assurance principles, methods, and processes Knowledge of Geometric Dimensioning and Tolerancing Knowledge of wiring and electrical systems Knowledge of inspection processes Knowledge of engineering drawings and wiring schematics Experience with aerospace standards AS9100, ISO-9001, and its general practices Experience inspecting a product or system according to specifications and requirements. Experience reading and comprehending standard blueprints and machine & process drawings. Ability to obtain and maintain certifications as required by training matrix and specialty. PREFERRED QUALIFICATIONS Desired Certifications: IPC/WHMA-A-620, IPC-A-610 and J-STD-001 EDGE AUTONOMY BENEFITS Matching 401(k) Paid PTO Paid holidays Medical, vision, and dental insurance Group Short-Term & Long-Term Disability HSA and FSA Options Critical Care Plan Accident Care Plan CLEARANCE REQUIREMENTS This position may require access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person's status under the ITAR and the EAR. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS The work environment may involve a standard office setting while also incorporating elements of a production area. Employees will use standard office equipment, including computers, and must demonstrate stamina to sit or stand while maintaining attention to detail despite potential interruptions. The role may require occasional activities such as walking, climbing, stooping, crouching, and bending. Vision is necessary for reading printed materials and a computer screen, while hearing and speech are essential for effective communication both in person and over the telephone. Additionally, the position may necessitate travel by air or automobile. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment. Employees may be able to lift up to 30 pounds as needed. EDGE AUTONOMY IS AN EQUAL OPPORTUNITY EMPLOYER All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Edge Autonomy is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources. Continued employment remains on an “At-Will” basis.

Bring your passion for space! Redwire is accelerating humanity's expansion into space by delivering reliable, economical and sustainable infrastructure for future generations. Where dreams and reality collide and the output is, out of this world. At Redwire Space, we are a team of dreamers and doers. Where the impossible becomes possible, and every day is an opportunity to learn and get one step closer to knowing the unknown. Join us on our mission to expand humanity's presence in space. The talented innovators in Goleta, CA are a leading developer and provider of satellite mechanisms, deployable structures and booms and deployable solar array systems to the global space market. The team is revolutionizing spaceflight and are currently being utilized on missions with NASA, the Department of Defense, and commercial space companies. With many more exciting projects on the horizon our team could use your curiosity, passion, talent and experience to help us Build Above. Summary We have a current opportunity for a Contractor - Quality Assurance Inspector located at our facility in Goleta, CA for period of 6 months. In this role you will be performing in-process inspections and receiving inspections of aerospace parts. Responsibilities * Performs receiving and receiving inspection of purchased parts and subassemblies. Verifies supplier compliance with all purchase order requirements, specifications and/or drawing requirements. * Performs dimensional inspections using hand-held instruments to measure parts and assemblies to drawing requirement. * Performs in-process inspections of assembled hardware per drawing requirements, verifies accuracy of entries on data sheets, work orders, adhesive mixes, and other data-keeping systems. * Performs finals inspections of assembled hardware per drawing requirements and is the liaison to the program Quality Engineer (Reports quality problems or findings to the QE). Assists Quality Engineering and Operations in the investigation of non-conformities. * Accurately documents the results of the inspections. * Performs quality review of work orders prior to their closure to verify count and condition of parts or assemblies, that all operations are complete, that associated kit lists are accurate, that parts are correctly labeled; and assists the Quality Engineer (as needed) to collect data for the assemblies End Item Data Package. * Performs source inspections at sub-tier suppliers, as needed. Ideal Experience * High School Diploma or equivalent is required. * 3+ years of experience in Quality Inspection, preferably in a high reliability, small batch, high variety manufacturing environment. * Ability to read drawings and prints. * Understanding of the set-up and use of mechanical inspection devices. * Ability to work independently and within a cross-functional team environment. Desired Skills * Knowledge of aerospace systems, methodology, and terminology * Familiarity with AS9100 / ISO9001 requirements * Familiarity with documenting product quality through paper and electronic systems including Word, Excel, and web-based systems. * Sufficient oral and written communication and interpersonal skills. * Ability to work in an environment with competing priorities. * Knowledgeable about calibration systems and internal controls associated with calibration. * Occasionally works in confined spaces. * Occasionally works in heights of 30 ft. or more in a scissor lift. * Specific vision abilities required by this job include close vision, distance vision, and color vision. * Occasional travel up to 5-10% for project testing. Grow with us as we innovate the next generation capabilities for a new era of space exploration! We offer a highly competitive benefits package along with a commitment to our core values of Integrity, Innovation, Impact, Inclusion, and Excellence. Pay Range $22.00 - $33.00 per hour How We Determine What We Pay (Compensation Philosophy) Redwire determines pay for positions using local, national, and industry-specific survey data, for our locations throughout the US. We will evaluate external equity and the cost of labor/prevailing wage index, in the relative marketplace for jobs directly comparable to jobs within our company. For new hires, we strive to make competitive offers allowing the new employee room for future growth. Salaries will be based on the applicant's level of experience, education, and specialized knowledge and skills. Additionally, we consider the external market rate, the amount we have budgeted internally, and internal equity within the company for the same position. An employee/candidate with a stronger skill set will receive higher pay. Redwire is an Equal Opportunity Employer; employment with Redwire is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All offers of employment at Redwire are contingent upon clear results of a thorough background check and your ability to provide proof of eligibility to work in the US. Note that some positions will also require US citizenship or ability to obtain a security clearance due to requirements of a classified program. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR Click Here

Job Description Rantec is hiring! Join our team as an Inspector on our 1st shift! (6:15am - 4:00pm) Come join our team! Based in Los Osos, California, located along California's scenic Central Pacific coastline, Rantec offers many outstanding benefits, the following are a few: Competitive wages Great benefits - i.e. Medical (PPO, HSA), Dental, Vision, Flexible Spending Accounts Vacation - 2 weeks to start, Holidays, Paid Sick Leave Tuition Assistance 401K with matching up to 6%, Peer-to-Peer recognition and Years of Service Awards. We have every other Friday off as we are on the 9/80 schedule Free catered lunch on the Friday/payday that we work. Rantec is an upper-tier designer and manufacturer of power supplies for the military and aerospace markets. We are an engineering-based company, with expertise in all aspects of power supply design, manufacturing and test. Position Summary Performs assigned inspection duties to assure compliance with requirements. When directed, performs expeditious and accurate product requirements verification at incoming inspection, and supports Document Control activities. Essential Duties and Responsibilities, include, but, are not limited to the following: Performs primarily in-process inspection, and when necessary, performs receiving and/or final inspection to assure product compliance with quality assurance standards and applicable specifications. As directed, performs Automated Optical Inspection (AOI) inspection activities. Receiving & Final Inspection Performs receiving and final inspection to assure product compliance with engineering design, purchase order requirements, workmanship quality standards, applicable specifications, and commodity product requirements. Reads and interprets blueprints, engineering change orders, assembly and inspection instructions. When directed performs audits of specific areas, processes and procedures. Use standard electrical and mechanical inspection tools such as microscopes, calipers, mechanical gauges and other measuring devices. Maintains records of rejected/accepted material, maintains databases for analysis of nonconformities. Perform other duties as assigned. Education and Experience High school diploma or equivalent 3 years related experience preferred Trainable to electrical and mechanical inspection requirements, incl. J-STD-001, IPC-610 and MIL-STDs. Familiar and comfortable with Microsoft Office programs including Word, Excel and Access database. Familiarity with electronic assembly methods desired. Strong work ethic and organizational skills to meet demands of fast-paced work environment. Ability to make sound decisions based on solid reasoning regarding acceptance/rejection of material. Salary: $24.00 Hourly Click on this link to read Rantec's Privacy Policy Rantec is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or status as a protected veteran. Rantec will consider requests for reasonable accommodation from applicants with disabilities or sincerely held religious beliefs. If you require accommodation during the application process, please contact *************. Powered by JazzHR oJrsnub4os

Salary: $18-$25 Are you detail-oriented and eager to build a career in the home services industry? Rogall + Co is seeking a motivated Home Services Inspector to join our team. This entry to mid-level position is focused on assessing properties for damage, maintenance needs, and potential service opportunities. If youre observant, safety-conscious, and ready to learn from industry professionals, wed love to hear from you! Location: Travel within San Luis Obispo County Duties and Responsibilities Conduct thorough investigations of homes, identifying damage from the elements, wear and tear, and invasive substrates. Document observations using photos, notes, and inspection reports. Provide recommendations for maintenance, repairs, or specialized services. Organize job sites: ensure safety, cleanliness, and proper setup/teardown procedures. Maintain professionalism and deliver a positive client experience during site visits. Follow safety protocols and actively participate in regular safety training. Keep inspection areas safe, clean, and organized. Follow company protocols for entering/exiting job sites and handling tools. Participate in job site safety meetings and training sessions. Adhere to all safety guidelines when working at heights and on various exterior surfaces. Actively engage in ongoing training to refine inspection skills and technical knowledge. Qualifications and Experience High school diploma or GED. Valid drivers license and reliable transportation, with a clean driving record Ability to work at heights and traverse diverse outdoor environments. Meticulous attention to detail and strong observational skills. Strong written and verbal communication. Well-organized, safety-oriented, and coachable. Preferred: Certification or training in home inspection (e.g., ASHI, InterNACHI, or equivalent). 1+ year experience in construction, maintenance, quality control, or inspection-related tasks. Familiarity with inspection documentation and report preparation. OSHA 10 certification or similar safety training. Benefits: Hiring Range: $18-$25 per hour Five paid sick days per year. Competitive Health, Vision and Dental Insurance is available for purchase through our Company plan. Additional opportunities for training, growth and advancement. 401k with company match Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of duties or responsibilities. Duties and responsibilities may change at any time, with or without notice, based on the needs of Rogall+Co. Pre-Employment and Physical Requirements All employment offers are contingent upon the successful completion of Rogall + Co.'s pre-employment background check. Employees will be required to lift up to 50+ pounds at a time regularly. Reasonable accommodations may be provided to enable qualified individuals with disabilities to perform the essential functions of the job Affirmative Action/EEO Rogall+Co is an equal opportunity employer and does not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic as defined by applicable law.

Building a career at Granite may be the most valuable thing you could do... We hire enthusiastic, hard-working individuals for college internships and entry-level positions. With locations across the country and unique opportunities for hands-on experience, mentorship and networking, there's never been a better time to join our team. General Summary This position will support Granite's Corporate Construction Quality Objectives as established in our 2022 Strategic Quality Plan and coordinate support activities with the Director of Construction Quality and collaborate with Regional (Strategic Plan) Implementation Champions across business functions, including assisting implementation of Construction Quality Management objectives, and establishing and managing regional, area and project level accountabilities. Essential Job Accountabilities * Provide support to Area Champions for implementation and execution of Granite's "Rework and Quality Incident Tracking Objective" and routinely review Dashboard and assist in accumulating data related to cost and cause of rework and Quality Incidence. * Coordinate and facilitate Collaborative Learning Events (CLE) for Major Quality Incidents to determine Contributing Factors (CF), Root Cause Analysis (RCA) and subsequently publish Quality Alerts to establish and maintain Granite library to house CLE's and Quality Alerts. * Help identify learning opportunities as a result of Quality Incidence and CLE's/delegate input into Granite's Lessons Learned database by routinely reviewing lessons learned to verify correct input will account for accurate filtering. * Assist Director in establishing a Project Quality Responsible, Accountable, Consulted, and Informed (RACI) Plan Model to provide guidance to our project teams on how to effectively implement and manage to Project Quality Minimums. * Assist in creating a process for capturing "Best Practices" across the Company in a centralized database to implement utilization of our database, and subsequently monitor and suggest process improvements. * Navigate Granite's cloud-based Autodesk Build Project/Quality Management Platform tutorials which provides capabilities to manage project document and drawings, RFI's, Submittals, Meetings and more. * Assist in establishing process for creating effective Inspection and Test Plans (ITPs) that measure and coordinate quality related inspection & testing activities and identify hold-points with all required parties & stakeholders. * Assist and support the development and effective use of checklists to guide construction activities through process of acceptance of work for Definable Features of Work (DFOW). * Participate with project QMS audits to identify opportunities for improvement and verify conformance with project specific and Granite quality requirements as identified in Project Quality RACI. * Advocate for and comply with Company's Quality Policy and Code of Conduct to ensure compliance. Education/Certification * Pursuit of Degree in Engineering, Construction Management or other Technical discipline preferred * Training and/or certification in one or more quality systems such as United State Army Core of Engineers (USACE) Contractor Quality Management, ASQ Manager of Quality, Quality Auditor, Quality Engineer or other continuous improvement methodologies such as Lean, Six Sigma or Kaizen encouraged * Participation in Student Professional Organizations such as ASCE, ASME, ASQ, ACM encouraged Work Experience * Relevant industry specific internship indicating technical, safety, quality or environmental experience on construction projects is beneficial for consideration. Knowledge, Skills, and Abilities * Knowledge of and experience with quality management systems such as ISO 9001, US Army Corps of Engineers, Malcolm Baldrige, Lean, Kaizen, Six Sigma or other recognized quality management systems * Technical knowledge of materials and construction concepts * Ability to properly manage and prioritize time, resources, and activities * Excellent communication skills and ability to interface effectively with Corporate Quality Team and various levels of project management and field supervision personnel * Ability to work in high production environments and respond quickly and effectively under pressure and deadlines * Proficient with database operations and Microsoft Office Suite Physical Demand The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements * Valid driver's license * Ability to travel * Temporary relocation for assignment Our Benefits at a Glance: In addition to building the next generation of builders, Granite invests in its interns by providing them access to a broad benefits package that includes medical, dental, vision, life insurance, disability insurance, flexible spending plans, as well as special programs for musculoskeletal health, mental wellness, and more. Interns may choose from two PPO medical plans through Anthem BlueCross, including our most popular plan, for which 100% of the premium is paid by Granite for eligible interns. We invest in the future of our interns by providing them with access to Granite's 401(k) plan where they are eligible for Granite's 100% employer match on the first 6% of eligible compensation that they defer into their 401(k) plan. Benefits may vary for positions located outside of the continental United States. Base Hourly Wage Range : Hourly: $23.00 $26.00 Pay may vary based upon relevant experience, skills, location, and education among other factors. About Granite Construction Incorporated Granite Construction Incorporated is a member of the S&P 400 Index and is the parent company of Granite Construction Company, one of the nation's largest heavy civil contractors and construction materials producers. Granite is a Drug-Free Workplace and Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, protected veteran status, or any other protected characteristic. We consider qualified applicants with arrest and conviction records in accordance with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. For additional information on applicant/employee rights please click here. Notice to Staffing Agencies Granite Construction, Inc. and its subsidiaries ("Granite") will not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to Granite, including unsolicited resumes sent to a Granite mailing address, fax machine or email address, directly to Granite employees, or to Granite's resume database will be considered Granite property. Granite will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Granite will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agencies must obtain advance written approval from Granite's recruiting function to submit resumes, and then only in conjunction with a valid fully-executed contract for service and in response to a specific job opening. Granite will not pay a fee to any Agency that does not have such agreement in place. Agency agreements will only be valid if in writing and signed by Granite's Human Resources Representative or his/ her designee. No other Granite employee is authorized to bind Granite to any agreement regarding the placement of candidates by Agencies.

The Quality Inspector works directly with the Chief Inspector/Quality Manager to ensure aircraft are supported at San Luis Obispo (KSBP) and in the field. This position is responsible for ensuring the quality control process is followed on all assigned projects to ensure all work meets the highest quality standards. These activities must be done while maintaining a positive and productive relationship with ACI Jet's employees, vendors, and clients. Available hours must be flexible for on-call work, including nights and weekends. The hourly pay rate for this position is negotiable, based on experience. Any employee that has accepted the position of Quality Inspector is required to competently perform within the following job description. Reports To The Quality Inspector - KSBP reports directly to the Chief Inspector/Quality Manager. Requirements Requirements Essential Duties and Responsibilities Duties include the following (other duties may be assigned as required by management): Monitor and ensure the proper execution of the quality control process as outlined in the Repair Station and Quality Control Manual. Determine articles submitted for repairs are within the Repair Station authorizations. Build work order packets for maintenance events. Monitor maintenance by completing in-process inspections. Make airworthiness determinations based on interpretation of FARs, ADs, SBs, Maintenance Manuals, and related information. Perform Final Inspections. Return aircraft to service. Generate required maintenance event records and distribute appropriately. Complete administrative processing of work order documents. 2. Technical Publications Source all needed maintenance data. Ensure maintenance data is available and current. Monitor and ensure applicable and current data is being used. 3. Tooling Ensure all necessary specialized tooling is available when needed. Ensure proper tools are used. Ensure serviceability of tools being used. 4. Culture Foster and encourage a culture of cooperation and teamwork. Participate and promote the company SQMS system. Knowledge, Skills, and Experience Required A passion for aviation. At least one to five years of inspection duties at a Part 145 Repair Station or equivalent. Work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports, and forms. Professional appearance. Troubleshooting skills and an ability to problem solve. Critical time management and logistical problem-solving skills. Attention to detail with a focus on safety and quality of work. On-call and after-hours support is required. High School Diploma or equivalent. Must have a valid A&P License. Must have a valid Driver's License. Must be able to work as a part of a team in a high-stress, fast-paced environment. Must be a self-starter, able to work with little to no guidance. Must be highly motivated, detail-oriented, and organized, with the ability to multi-task. Must be computer proficient (MS Office, Aviation Maintenance Software, Google Docs, Google Sheets). Must be able to lift 50 pounds, climb, kneel, squat, and stand for extended periods. Must be available to be on-call. Must possess excellent communication and interpersonal skills including the ability to read, write and speak English. Must be able to provide proof of eligibility to work in the United States. Preferred Type Experience Citation CE-560, XL, XLS, Citation CE-525, 525A, 525B, CE-680 and CE-750 Bombardier Global Models, Challenger 300/350, and 600-Series Acceptable Type Experience All Gulfstream types. All Cessna Citation types. All Bombardier types. Other This position is a DOT Safety Sensitive position, which will require placement in a random drug test pool. Pay $41.00 - $60.00/hour | DOE

Job Description Quality Inspector Gavial Engineering & Manufacturing specializes in the manufacturing of high-quality, high-reliability parts and systems. With a wide range of manufacturing, engineering and project management capabilities, Gavial supplies mission-critical equipment to industries that require the highest level of workmanship and quality. Gavial and its employees are dedicated to delivering the highest level of quality and service to its customers. The Gavial team draws upon decades of experience and knowledge to build high-quality, high-reliability parts and systems for some of the most demanding industries. We apply our Quality Assurance Program to strong processes, industry knowledge and dedicated people to deliver quality products on time. Quality Inspector Job Summary: The Quality Inspector is responsible for ensuring that raw materials and finished products meet established quality standards. This role involves inspecting, testing, sorting, sampling, or weighing components - whether raw, machined, fabricated, or assembled - to identify defects, wear, or deviations from specifications. The inspector may utilize precision measuring instruments and basic testing equipment to verify compliance and maintain product integrity. Buyer Essential Duties and Responsibilities: Examines parts for surface defects such as chips, scratches and pinholes. Compares surface finish of work-piece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish. Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Substitutes known values, such as dimensions from blueprints, into standard formulas and solves for unknown quantities to determine dimensions not specified in blueprints. Analyzes and interprets blueprints, data, manuals, and other materials to determine specifications, inspection procedures, and measuring instruments required. Plans and sets up inspections related to receiving, in-process and final inspections of assemblies, sub-assemblies, final units and piece parts per customer requirements. Measures dimensions such as length, height, hole locations and distance between reference points to ensure product meets specifications. Locates reference points on part and measures dimensions such as angle, arc, and radii to ensure product meets specifications. Performs first article inspections to AS9102 specifications. Performs mechanical inspections using surface plate set-ups, dial indicators, fixed gauges, height gauges, hardness testers, torque testers, and using measuring instruments such as rulers, calipers, gauges, and micrometers. Compares colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards. Computes defect percentages or averages, using formulas and calculators, and prepare reports of inspection or test findings. Records inspection data on inspection reports and enters inspection results into inventory management software. Generates non-conformance reports (NCRs) when parts are found to be defective. Ensures product is properly identified with inspection status and traceability information. Analyzes data, making computations as necessary, to determine the acceptability of inspection results. Examines layout and installation of wiring, cables, subassemblies, hardware and components to detect assembly errors. Compares assembly with drawings and parts list to detect missing hardware. Examines electrical terminations (crimps, solder connections, etc.) and compares them to established workmanship standards (familiar with IPC-A-610, IPC-WHMA-620) Examines production documents to ensure that all assembly, inspection, and testing steps were performed according to specifications. Stacks and arranges inspected products for further processing, shipping, or packaging and transport products to other workstations as necessary. Performs final inspections and supports in-house customer source inspections. Generates and prepares QA records packages to be sent to customer prior to and after shipments. Maintains manufacturing, inspections and test records generated during receipt, fabrication and assembly of material, parts and assemblies. Maintains inspection, measuring and test equipment through a calibration recall program. Skills Required: Analytical mindset with excellent attention to detail and troubleshooting ability. Good time management skills required. Effective written and verbal communication skills. Proficiency in Microsoft Office Suite (email, Excel, Word). Experience with ERP system (inventory/manufacturing software). Education/Experience: High School Diploma or equivalent required. Minimum 1 year of inspection-related experience in a manufacturing environment; 3 years' experience preferred. Use of precision measuring tools (calipers, micrometers, gauges) Knowledge of quality standards (AS9100) IPC-A-610 Inspector Certified a plus Benefits: Medical, Dental, and Vision insurance 401(k) and employer match Health Savings Account (HSA) Employer paid Life insurance Employee assistance program Paid Time Off (PTO) Floating Holidays To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Gavial Engineering & Manufacturing is an equal opportunity employer.

• Performs first article inspection (FAI) of newly designed or revised products. • Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured. • Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment. • Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. Job Requirements Education: High school diploma or equivalent is preferred or equivalent experience. Experience: 0-3 years. Computer Skill: Familiar with Windows Operating System. Other Skills: Ability to use precision measuring instruments and to read engineering drawings, specifications and other technical literature is preferred. Minimum understanding of basic inspection tools.

Rantec is hiring! Join our team as an Inspector on our 1st shift! (6:15am - 4:00pm) Come join our team! Based in Los Osos, California, located along California's scenic Central Pacific coastline, Rantec offers many outstanding benefits, the following are a few: Competitive wages Great benefits - i.e. Medical (PPO, HSA), Dental, Vision, Flexible Spending Accounts Vacation - 2 weeks to start, Holidays, Paid Sick Leave Tuition Assistance 401K with matching up to 6%, Peer-to-Peer recognition and Years of Service Awards. We have every other Friday off as we are on the 9/80 schedule Free catered lunch on the Friday/payday that we work. Rantec is an upper-tier designer and manufacturer of power supplies for the military and aerospace markets. We are an engineering-based company, with expertise in all aspects of power supply design, manufacturing and test. Position Summary Performs assigned inspection duties to assure compliance with requirements. When directed, performs expeditious and accurate product requirements verification at incoming inspection, and supports Document Control activities. Essential Duties and Responsibilities, include, but, are not limited to the following: Performs primarily in-process inspection, and when necessary, performs receiving and/or final inspection to assure product compliance with quality assurance standards and applicable specifications. As directed, performs Automated Optical Inspection (AOI) inspection activities. Receiving & Final Inspection Performs receiving and final inspection to assure product compliance with engineering design, purchase order requirements, workmanship quality standards, applicable specifications, and commodity product requirements. Reads and interprets blueprints, engineering change orders, assembly and inspection instructions. When directed performs audits of specific areas, processes and procedures. Use standard electrical and mechanical inspection tools such as microscopes, calipers, mechanical gauges and other measuring devices. Maintains records of rejected/accepted material, maintains databases for analysis of nonconformities. Perform other duties as assigned. Education and Experience High school diploma or equivalent 3 years related experience preferred Trainable to electrical and mechanical inspection requirements, incl. J-STD-001, IPC-610 and MIL-STDs. Familiar and comfortable with Microsoft Office programs including Word, Excel and Access database. Familiarity with electronic assembly methods desired. Strong work ethic and organizational skills to meet demands of fast-paced work environment. Ability to make sound decisions based on solid reasoning regarding acceptance/rejection of material. Salary: $24.00 Hourly Click on this link to read Rantec's Privacy Policy Rantec is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or status as a protected veteran. Rantec will consider requests for reasonable accommodation from applicants with disabilities or sincerely held religious beliefs. If you require accommodation during the application process, please contact [email protected].

Building a career at Granite may be the most valuable thing you could do... We hire enthusiastic, hard-working individuals for college internships and entry-level positions. With locations across the country and unique opportunities for hands-on experience, mentorship and networking, there's never been a better time to join our team. General Summary This position will support Granite's Corporate Construction Quality Objectives as established in our 2022 Strategic Quality Plan and coordinate support activities with the Director of Construction Quality and collaborate with Regional (Strategic Plan) Implementation Champions across business functions, including assisting implementation of Construction Quality Management objectives, and establishing and managing regional, area and project level accountabilities. Essential Job Accountabilities Provide support to Area Champions for implementation and execution of Granite's “Rework and Quality Incident Tracking Objective” and routinely review Dashboard and assist in accumulating data related to cost and cause of rework and Quality Incidence. Coordinate and facilitate Collaborative Learning Events (CLE) for Major Quality Incidents to determine Contributing Factors (CF), Root Cause Analysis (RCA) and subsequently publish Quality Alerts to establish and maintain Granite library to house CLE's and Quality Alerts. Help identify learning opportunities as a result of Quality Incidence and CLE's/delegate input into Granite's Lessons Learned database by routinely reviewing lessons learned to verify correct input will account for accurate filtering. Assist Director in establishing a Project Quality Responsible, Accountable, Consulted, and Informed (RACI) Plan Model to provide guidance to our project teams on how to effectively implement and manage to Project Quality Minimums. Assist in creating a process for capturing “Best Practices” across the Company in a centralized database to implement utilization of our database, and subsequently monitor and suggest process improvements. Navigate Granite's cloud-based Autodesk Build Project/Quality Management Platform tutorials which provides capabilities to manage project document and drawings, RFI's, Submittals, Meetings and more. Assist in establishing process for creating effective Inspection and Test Plans (ITPs) that measure and coordinate quality related inspection & testing activities and identify hold-points with all required parties & stakeholders. Assist and support the development and effective use of checklists to guide construction activities through process of acceptance of work for Definable Features of Work (DFOW). Participate with project QMS audits to identify opportunities for improvement and verify conformance with project specific and Granite quality requirements as identified in Project Quality RACI. Advocate for and comply with Company's Quality Policy and Code of Conduct to ensure compliance. Education/Certification Pursuit of Degree in Engineering, Construction Management or other Technical discipline preferred Training and/or certification in one or more quality systems such as United State Army Core of Engineers (USACE) Contractor Quality Management, ASQ Manager of Quality, Quality Auditor, Quality Engineer or other continuous improvement methodologies such as Lean, Six Sigma or Kaizen encouraged Participation in Student Professional Organizations such as ASCE, ASME, ASQ, ACM encouraged Work Experience Relevant industry specific internship indicating technical, safety, quality or environmental experience on construction projects is beneficial for consideration. Knowledge, Skills, and Abilities Knowledge of and experience with quality management systems such as ISO 9001, US Army Corps of Engineers, Malcolm Baldrige, Lean, Kaizen, Six Sigma or other recognized quality management systems Technical knowledge of materials and construction concepts Ability to properly manage and prioritize time, resources, and activities Excellent communication skills and ability to interface effectively with Corporate Quality Team and various levels of project management and field supervision personnel Ability to work in high production environments and respond quickly and effectively under pressure and deadlines Proficient with database operations and Microsoft Office Suite Physical Demand The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements Valid driver's license Ability to travel Temporary relocation for assignment Our Benefits at a Glance: In addition to building the next generation of builders, Granite invests in its interns by providing them access to a broad benefits package that includes medical, dental, vision, life insurance, disability insurance, flexible spending plans, as well as special programs for musculoskeletal health, mental wellness, and more. Interns may choose from two PPO medical plans through Anthem BlueCross, including our most popular plan, for which 100% of the premium is paid by Granite for eligible interns. We invest in the future of our interns by providing them with access to Granite's 401(k) plan where they are eligible for Granite's 100% employer match on the first 6% of eligible compensation that they defer into their 401(k) plan. Benefits may vary for positions located outside of the continental United States. Base Hourly Wage Range :Hourly: $23.00 $26.00 Pay may vary based upon relevant experience, skills, location, and education among other factors. About Granite Construction Incorporated Granite Construction Incorporated is a member of the S&P 400 Index and is the parent company of Granite Construction Company, one of the nation's largest heavy civil contractors and construction materials producers. Granite is a Drug-Free Workplace and Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, protected veteran status, or any other protected characteristic. We consider qualified applicants with arrest and conviction records in accordance with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. For additional information on applicant/employee rights please click here. Notice to Staffing Agencies Granite Construction, Inc. and its subsidiaries ("Granite") will not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to Granite, including unsolicited resumes sent to a Granite mailing address, fax machine or email address, directly to Granite employees, or to Granite's resume database will be considered Granite property. Granite will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Granite will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agencies must obtain advance written approval from Granite's recruiting function to submit resumes, and then only in conjunction with a valid fully-executed contract for service and in response to a specific job opening. Granite will not pay a fee to any Agency that does not have such agreement in place. Agency agreements will only be valid if in writing and signed by Granite's Human Resources Representative or his/ her designee. No other Granite employee is authorized to bind Granite to any agreement regarding the placement of candidates by Agencies.

Are you detail-oriented and eager to build a career in the home services industry? Rogall + Co is seeking a motivated Home Services Inspector to join our team. This entry to mid-level position is focused on assessing properties for damage, maintenance needs, and potential service opportunities. If you're observant, safety-conscious, and ready to learn from industry professionals, we'd love to hear from you! Location: Travel within San Luis Obispo County Duties and Responsibilities Conduct thorough investigations of homes, identifying damage from the elements, wear and tear, and invasive substrates. Document observations using photos, notes, and inspection reports. Provide recommendations for maintenance, repairs, or specialized services. Organize job sites: ensure safety, cleanliness, and proper setup/teardown procedures. Maintain professionalism and deliver a positive client experience during site visits. Follow safety protocols and actively participate in regular safety training. Keep inspection areas safe, clean, and organized. Follow company protocols for entering/exiting job sites and handling tools. Participate in job site safety meetings and training sessions. Adhere to all safety guidelines when working at heights and on various exterior surfaces. Actively engage in ongoing training to refine inspection skills and technical knowledge. Qualifications and Experience High school diploma or GED. Valid driver's license and reliable transportation, with a clean driving record Ability to work at heights and traverse diverse outdoor environments. Meticulous attention to detail and strong observational skills. Strong written and verbal communication. Well-organized, safety-oriented, and coachable. Preferred: Certification or training in home inspection (e.g., ASHI, InterNACHI, or equivalent). 1+ year experience in construction, maintenance, quality control, or inspection-related tasks. Familiarity with inspection documentation and report preparation. OSHA 10 certification or similar safety training. Benefits: Hiring Range: $18-$25 per hour Five paid sick days per year. Competitive Health, Vision and Dental Insurance is available for purchase through our Company plan. Additional opportunities for training, growth and advancement. 401k with company match Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of duties or responsibilities. Duties and responsibilities may change at any time, with or without notice, based on the needs of Rogall+Co. Pre-Employment and Physical Requirements All employment offers are contingent upon the successful completion of Rogall + Co.'s pre-employment background check. Employees will be required to lift up to 50+ pounds at a time regularly. Reasonable accommodations may be provided to enable qualified individuals with disabilities to perform the essential functions of the job Affirmative Action/EEO Rogall+Co is an equal opportunity employer and does not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic as defined by applicable law.

Performs first article inspection (FAI) of newly designed or revised products. • Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured. • Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment. • Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. Job Requirements Education: High school diploma or equivalent. Experience: 8+ years. Computer Skill: Intermediate skills with Microsoft office: Windows Operating System, Excel and Powerpoint. Prior use of and advanced abilities within an ERP system. Other Skills: Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred. Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc., and accomplish inspection of detailed parts. Identify problems and solve them independently, work with little to no supervision.

Rantec is hiring! Join our team as an Inspector on our 1st shift! (6:15am - 4:00pm) Come join our team! Based in Los Osos, California, located along California's scenic Central Pacific coastline, Rantec offers many outstanding benefits, the following are a few: * Competitive wages * Great benefits - i.e. Medical (PPO, HSA), Dental, Vision, Flexible Spending Accounts * Vacation - 2 weeks to start, Holidays, Paid Sick Leave * Tuition Assistance * 401K with matching up to 6%, * Peer-to-Peer recognition and Years of Service Awards. * We have every other Friday off as we are on the 9/80 schedule * Free catered lunch on the Friday/payday that we work. Rantec is an upper-tier designer and manufacturer of power supplies for the military and aerospace markets. We are an engineering-based company, with expertise in all aspects of power supply design, manufacturing and test. Position Summary Performs assigned inspection duties to assure compliance with requirements. When directed, performs expeditious and accurate product requirements verification at incoming inspection, and supports Document Control activities. Essential Duties and Responsibilities, include, but, are not limited to the following: * Performs primarily in-process inspection, and when necessary, performs receiving and/or final inspection to assure product compliance with quality assurance standards and applicable specifications. * As directed, performs Automated Optical Inspection (AOI) inspection activities. * Receiving & Final Inspection * Performs receiving and final inspection to assure product compliance with engineering design, purchase order requirements, workmanship quality standards, applicable specifications, and commodity product requirements. * Reads and interprets blueprints, engineering change orders, assembly and inspection instructions. * When directed performs audits of specific areas, processes and procedures. * Use standard electrical and mechanical inspection tools such as microscopes, calipers, mechanical gauges and other measuring devices. * Maintains records of rejected/accepted material, maintains databases for analysis of nonconformities. * Perform other duties as assigned. Education and Experience * High school diploma or equivalent * 3 years related experience preferred * Trainable to electrical and mechanical inspection requirements, incl. J-STD-001, IPC-610 and MIL-STDs. * Familiar and comfortable with Microsoft Office programs including Word, Excel and Access database. * Familiarity with electronic assembly methods desired. * Strong work ethic and organizational skills to meet demands of fast-paced work environment. * Ability to make sound decisions based on solid reasoning regarding acceptance/rejection of material. Salary: $24.00 Hourly Click on this link to read Rantec's Privacy Policy Rantec is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or status as a protected veteran. Rantec will consider requests for reasonable accommodation from applicants with disabilities or sincerely held religious beliefs. If you require accommodation during the application process, please contact [email protected].

• Performs first article inspection (FAI) of newly designed or revised products. • Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured. • Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment. • Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. Job Requirements Education: High school diploma or equivalent. Experience: 4-7 years. Computer Skill: Familiar with Windows Operating System. Basic skills with Microsoft office systems. Other Skills: Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred. Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc. Identify problems with some solving capabilities.

• Performs first article inspection (FAI) of newly designed or revised products • Inspects incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order • Examine sub-assemblies used in the construction of aircraft interiors • Assists with inspection of in-process and final products prior to shipment • Compares quantity and part number of items received with procurement data and other specifications to ensure completeness and accuracy of order • Inspects and measures items for dimensional accuracy, fit, alignment, and functional operation, according to blueprints, parts manuals, company or military standards, and other specifications, using precision measuring instruments and devices • Approves or rejects items, and records inspection and disposition information • May inspect outgoing and production line parts and materials • Follows procedure outlines for reference use in subsequent inspections, using data obtained from blueprints, customer specifications, and catalogs • Conducts routine tasks as directed • Closely supervised with little latitude for independent judgment Job Requirements Education: High school diploma or equivalent experience. Experience: Less than 1 year experience within a quality environment. Computer Skills: Comfortable using Microsoft Office programs: Microsoft Word, Excel, Outlook, etc. Other Skills: Experienced in precision measuring instruments. Able to read engineering drawings. Description: Entry-level position within job role.

**Job details** **General information** **Entity** Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience. **Reference number** 2025-169020 **Job details** **Domain** Production **Job field / Job profile** Quality - Quality management **Job title** Receiving Inspector 1 M/F **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** - Performs first article inspection (FAI) of newly designed or revised products - Inspects incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order - Examine sub-assemblies used in the construction of aircraft interiors - Assists with inspection of in-process and final products prior to shipment - Compares quantity and part number of items received with procurement data and other specifications to ensure completeness and accuracy of order - Inspects and measures items for dimensional accuracy, fit, alignment, and functional operation, according to blueprints, parts manuals, company or military standards, and other specifications, using precision measuring instruments and devices - Approves or rejects items, and records inspection and disposition information - May inspect outgoing and production line parts and materials - Follows procedure outlines for reference use in subsequent inspections, using data obtained from blueprints, customer specifications, and catalogs - Conducts routine tasks as directed - Closely supervised with little latitude for independent judgment **But what else? (advantages, specificities, etc.)** Inspects purchased parts, assemblies, accessories, and materials for conformance to specifications using precision measuring instruments. Examines items for defects in materials, work, and damage. Audits and reports on materials, processes and products used in the construction of aircraft interiors using variable or attribute measuring instruments and techniques to ensure conformance with the company's quality standards. The individual is also responsible for the accurate data entry of the transactions associated with the receipt and acceptance of product. **Candidate skills & requirements** Education: High school diploma or equivalent experience. Experience: Less than 1 year experience within a quality environment. Computer Skills: Comfortable using Microsoft Office programs: Microsoft Word, Excel, Outlook, etc. Other Skills: Experienced in precision measuring instruments. Able to read engineering drawings. Description: Entry-level position within job role. **Annual salary** $34,320 - 51,240 USD **Job location** **Job location** North America, United States, California **City (-ies)** 2641 Airpark Drive CA 93455 Santa Maria **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes