Quality control inspector jobs in Toms River, NJ - 142 jobs

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. The Quality Inspector II will be responsible for performing quality assurance inspections on purchased components, manufactured sub-assemblies and final product. The Quality Inspector will perform all duties in accordance to the requirements of overall corporate policies, FDA regulations, ISO 9001, ISO 13485, the medical device directive, and the other applicable regulatory agencies. Expectations are to be familiar with and able to measure critical dimensions. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform inspection by using a variety of inspection measuring and test equipment to determine acceptance or rejection of material or parts. Perform first article, incoming/receiving, and in-process inspections of materials or parts; determine acceptance or rejection after inspection and/or testing of materials, parts, and/or equipment. Interpret and work within the guideline of drawings, specifications, charts, procedures, and other data to determine acceptance or rejection of materials. Read and interpret sampling pan as per the American national standard institute (ANSI), Assist in the review and disposition of non-conforming material and customer returned material, including rework, scrap, and return to vendor. Maintain accurate and current inspection and/or testing records such as nit not limited to Material Certifications, Inspection/Test Results and reports, Certificates of Conformance, Rejection reports/tags, as required by applicable procedure and/or specification. Coordinate and inform other departments of inspection and/or testing status in support of production and project goals and initiatives. Promote and participate in continuous improvement initiatives. Responsible for the maintenance of appropriate conditions of all quarantine locations. Maintain the QC inspection areas in an orderly fashion conducive to carrying out safe and efficient inspections and procedures. Inspection requirements include training and working in classified clean rooms as necessary to perform in process inspections. Maintain records of inspection and all testing performed on the appropriate test records. Perform line clearances and quality reviews in manufacturing, labeling, or other assigned areas during manufacturing activities. Identify and implement opportunities for continuous improvement, including document revisions in order to maintain accurate SOPs. Provide quality support to various departments as needed, e.g. engineering, product development, etc.) Assist in training new associates according to the Quality System Regulations and company SOPs as applicable. May also perform other related duties, responsibilities, and special projects as assigned. DESIRED MINIMUM QUALIFICATIONS Associate degree in science is preferred. 3-7 years of relevant GMP/GLP experience specific to incoming, line clearance, in-process, and finished goods inspections in pharmaceutical or medical device industry. QA experience in the medical device industry preferred. Must have strong written and verbal communication skills. Strong organizational skills, self-directed, strong problem solving and interpersonal skills. Knowledge of CAPA, Validations, Change Control, preferred. Working knowledge of ISO 13485, 21CFR820 FDA QSR, and cGMP. Knowledgeable in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) preferred. Salary Pay Range: $21.12 - $27.98 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Sr. Craft InspectorLocation: Middletown, PA (Surrounding Areas) Duration: 03/010/2024-12/31/2024Job Description:· The Sr. Craft Inspector performs the quality control (QC) function over the contractor's work as a part of the Company's quality assurance program and is responsible for the completion of all activities in his area of assignment in accordance with the appropriate Company specifications and the approved for construction drawings. Duties may include, but are not limited to:· Right-of-Way Clearing and Grading' Ditching, Stringing, and Bending' Lowering, Padding, and Backfilling' Road Boring' Tie-ins' Clean-up' inspection.· The inspector works under the direction of the Chief Inspector may be assigned additional responsibilities as required· The inspector provides quality assurance through inspection of work and materials for conformance to requirements.· The inspector is to complete required documentation (i.e. reports and log books) in a timely, concise, and accurate manner.· Familiarization with the approved construction drawings and the appropriate Company specifications in order to assure the work is performed in accordance with those requirements.· Familiarization with Contract documents (Agreement) as it relates to his or her duties on the project· Familiarization with applicable industry and regulatory codes' Familiarization with the Pre-Job Notes · Familiarization with the sequence of the work and plan inspection of upcoming activities· Report safety issues to the Chief Inspector and Safety Inspector· Drawing markups for as-built records· Hydrostatic tests and any test failures· Quantity, size, wall thickness, grade, heat number, other pipe nomenclature and pipe coating, and its location· Understanding the basics of pipe alignment, welding, and its inspection (specialized inspectors are required for the actual inspection)· Condition of ditch bottom Rocks, roots, clay, and other debris· Lifting and lowering in equipment· Understanding, monitoring, assessing, and reporting on painting and coating activities and items including but not limited to:· Vendor Product data sheet utilization· Proper application of paint and/or coating· Proper setup and use of holiday detector / jeep Requirements:· API 1169· OSHA 10 or OSHA 30· 10 years hands on experience· 5 years supervisor experience C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: * Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. * Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. * Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. * Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. * Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. * Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. * Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. * Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. * Determines acceptability or rework by conducting inspections and physical tests of reworked product. * Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. * Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. * Contributes to team effort by accomplishing related results as needed. * Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator * Performs other duties as assigned * Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: * Health Insurance * Dental Insurance * Vision Insurance * Basic and Voluntary Life * Long-Term Disability * Flexible Spending Accounts * Employee Assistance Program * Paid Time Off * Paid Holidays, Bereavement, Jury Duty * 401(k) with company match * Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

Job DescriptionOVERVIEW: Quality Control Technician:The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM QUALIFICATIONS: Quality Control Technician: High school diploma or equivalent qualification. Certification in quality control is preferred. Must have food manufacturing experience. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. KEY RESPONSIBILITIES: Quality Control Technician: Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carried out correctly. Inspect finished produced goods to ensure their quality and adherence are up to specifications. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Collect and take samples of production batch to ensure products are meeting standards. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Conduct internal audits of manufacturing processes and procedures to ensure ongoing compliance with quality standards and regulations. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job Title: Quality Control (QC) Inspector Company: Hansome Energy Systems Employment Type: Full-Time Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move. Position Overview Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections. Key Responsibilities Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components. Verify parts and assemblies against drawings, specifications, and quality standards. Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment. Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity. Document inspection results, discrepancies, and nonconformances clearly and accurately. Assist with root-cause investigations and corrective actions when defects are detected. Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications. Ensure products meet all requirements before release to the next production stage. Collaborate closely with production, engineering, and quality teams to resolve issues. Support continuous improvement and maintain compliance with internal and external quality requirements. Qualifications Required High school diploma or equivalent. 1-3 years of experience in quality inspection or manufacturing. Strong understanding of mechanical drawings, tolerances, and inspection requirements. Proficiency with measurement tools such as calipers, micrometers, and gauges. Strong attention to detail, accuracy, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move. Must be a US Citizen Preferred Experience in defense, aerospace, or other high-reliability manufacturing environments. Familiarity with quality systems such as ISO 9001 or MIL-STD requirements. Experience with nonconformance reporting (NCR), MRB processes, or internal audits. Basic electrical knowledge or experience inspecting rotating electrical equipment. Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.). Work Environment Full-time, on-site QC inspection role. Work involves manufacturing floor, inspection stations, and documentation work areas. Exposure to shop environments, machinery, and moderate noise (with proper PPE). Quality- and safety-focused culture supporting defense and industrial programs. Benefits Competitive compensation Health, dental, and vision insurance Paid time off and holidays Retirement plan options Ongoing training and skill development Opportunity to ensure quality for products supporting U.S. Navy and critical applications How to Apply Qualified candidates are encouraged to submit their resume and/or application to the Hansome Energy Systems hiring team.

Night Owl Needed! Be the Quality Guardian of Our Growing Team - Competitive Benefits Package! Do you have a keen eye for detail and thrive in a fast-paced environment? Are you a night owl looking for a challenging and rewarding career with a comprehensive benefits package? Then we want YOU on our team! As a Quality Inspector (Night Shift) , you'll be the guardian of our quality standards in a great custom plastic manufacturing environment , ensuring every product meets our high expectations. You'll perform inspections, maintain records, and collaborate with the team to keep our production line running smoothly. This is your chance to: Be a key player in a rapidly growing company Work alongside a supportive and collaborative team in a great custom plastic manufacturing environment Develop your skills and knowledge in quality control Make a real difference in the quality of our products Here's a glimpse into your world: Additional $3 per hour shift differential Inspect parts and ensure they meet specifications Maintain detailed records and document processes Help develop and implement quality standards And more! To be successful, you'll need: 3+ years of experience as a Quality Inspector A high school diploma (or equivalent) Strong attention to detail and a commitment to quality Excellent analytical and problem-solving skills Ability to work independently and as part of a team Willingness to learn and continuously improve Familiarity with ISO 9001:2015, cGMP standards a plus Bonus points if you have: Experience working in a cleanroom environment Knowledge of SQF standards Experience with gauge calibration or training others Benefits: Medical, Dental & Vision Insurance: We offer comprehensive health coverage options to keep you and your loved ones well. Company-Paid Life Insurance: We've got your back, with life insurance coverage included. Optional Voluntary Benefits: Tailor your benefits package to your needs with a variety of additional options. Paid Time Off & Paid Holidays: Recharge and relax with paid time off and holidays. 401(k) with Company Match: Save for your future with our retirement plan and a company match on your contributions. Profit Sharing: Share in the company's success with our profit-sharing program. Ready to join our growing team? Apply today and let's make quality happen - together!

About us Delva Tool & Machine (DTM) and its 6 locations specialize in precision machining, fabrication, and assembly highly engineered components. With over 175 years of combined experience, 300,000 sq. ft. of floor space, 250 CNC machines and 350 talented employees between 6 locations across the United States and Canada, we leverage our combined expertise and state of the art CNC machining capabilities to deliver quality machined parts to customers all across the globe. Our primary commitment is to provide our customers with a quality product, on-time delivery, and competitive pricing. Core Values Relentlessly Driven to Excel - We take pride in mastering our craft, pushing ourselves to be the best, and constantly improving. “Good enough” is never enough. Tech-Forward Problem-Solvers - We embrace challenges with a solution-oriented mindset, thinking critically and adapting quickly to get the job done. We seek out and leverage the best technology and processes, appropriately automating to be more agile and lean. Accountable & Dependable - We take ownership of our work, meet deadlines, and follow through on our commitment; no excuses and no self-victimizing. Team-First Mentality - We collaborate, communicate, and support each other, knowing that success comes from effective collaboration. Integrity in Everything - We do what's right, even when no one is watching. Honesty, transparency, and respect guide our decisions. Position Summary Delva Tool & Machine (DTM) is seeking a Quality Technician for our Cinnaminson, NJ location. The Quality Technician will work with the Quality Manager and other manufacturing personnel to support our overall quality objectives by developing, implementing, and maintaining reports for customers. If you are looking for an organization and career that will match your strong work ethic and passion for success, Delva Tool & Machine is a great place to start! *This position works a schedule of Monday through Friday from 7:30 a.m. to 4:00 p.m. The salary range for this role is between $41,000 - $83,200 per year, and applies to Quality Technician I, II, and III, with final compensation determined by level, experience, and qualifications* Essential Duties and Responsibilities Position Experience Education Essential Duties and Major Responsibilities Quality Technician I 1-2 years' experience in a manufacturing or production environment, preferably within CNC machining, aerospace, defense, or precision manufacturing. High school diploma or equivalent required; technical training, trade school coursework, or relevant quality/manufacturing certifications are preferred and may substitute for formal education based on experience. Perform basic visual, dimensional, and documentation inspections on incoming, in-process, and final products under close supervision. Follow established inspection procedures, quality standards, and work instructions to verify product meets customer and Delva/CMT requirements. Review material certifications, supplier documents, and outside process paperwork for completeness and accuracy. Assist in assembling technical data packages and inspection documentation. Promptly identify, document, and report any nonconforming conditions or discrepancies. Maintain inspection records, logs, and reports in accordance with AS9100/ISO procedures. Support first article inspection preparation by gathering prints, certifications, and required documentation. Perform basic gauge checks, tool verifications, and equipment calibration support tasks as directed. Communicate clearly with Quality and Production personnel regarding inspection results. Adhere to all safety guidelines and maintain a clean and organized inspection area. Assist with other quality-related tasks as assigned. Quality Technician II 3-6 years' experience in a manufacturing or production environment, preferably within CNC machining, aerospace, defense, or precision manufacturing. High school diploma or equivalent required; technical training, trade school coursework, or relevant quality/manufacturing certifications are preferred and may substitute for formal education based on experience. Perform complex dimensional, mechanical, and documentation inspections with minimal supervision. Develop, update, and maintain inspection documentation including control plans, technical data packages, and customer-required forms. Submit first article reports (AS9102), control plans, and supporting data to customers as required. Review drawings, specifications, and customer requirements to determine proper inspection methods. Ensure products and all associated documentation meet defined requirements per customer specifications and the Delva quality system. Review and verify outside processing documentation, material certifications, and supplier compliance records. Identify quality issues, investigate root causes at the inspection level, and communicate findings promptly. Assist in implementing and monitoring quality standards, parameters, and inspection criteria. Support process troubleshooting and collaborate with cross-functional teams on problem resolution. Record inspection results, maintain traceability, and ensure compliance with AS9100/ISO documentation standards. Train junior technicians and production operators on inspection procedures, documentation, and quality expectations. Participate in continuous improvement initiatives, including scrap reduction, takt-time improvement, and bottleneck support. Assist with special projects, audits, and customer support activities as assigned. Quality Technician III 7+ years' experience in a manufacturing or production environment, preferably within CNC machining, aerospace, defense, or precision manufacturing. High school diploma or equivalent required; technical training, trade school coursework, or relevant quality/manufacturing certifications are preferred and may substitute for formal education based on experience. Lead complex inspections, including advanced dimensional verification, GD&T interpretation, and multi-step documentation reviews. Develop, implement, and improve quality processes to ensure products meet all specifications for quality, function, and reliability. Create, manage, and deliver comprehensive technical data packages, first article reports, and customer-required quality documentation. Establish and refine product-specific quality standards, acceptance criteria, and inspection parameters. Conduct detailed document reviews of drawings, materials, and external process certifications to ensure full compliance. Act as a quality liaison to customers, engineering, outside processors, and production teams for technical quality issues. Drive root cause investigations, corrective action development, and long-term quality improvement strategies. Lead training efforts for operators, supervisors, and lower-level technicians on updated inspection methods or process modifications. Support and lead efforts to reduce scrap, improve process stability, and enhance throughput in quality bottleneck areas. Provide guidance during audits and customer reviews; ensure all required documentation is accurate, complete, and available. Use advanced quality tools, measurement equipment, and software (CAD, FAI/AS9102 tools, databases). Maintain expert-level understanding of AS9100/ISO, quality assurance methods, and industry requirements. Assist Quality Manager with reporting, metrics, and strategic quality initiatives. Perform other advanced or leadership-level duties as needed. Benefits and Perks Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued vacation time, sick time, paid holidays, 401(k) with company match, health, dental, and vision insurance as well as Short-Term Disability, Long-Term Disability, and life/AD&D insurance. We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate.

Date 05/2025 Title Technician, QC Analytical Department Quality Control Reports to Manager, Chemistry Laboratory FLSA (Exempt or Non-Exempt Non-Exempt We are seeking a detail-oriented and skilled Laboratory Technician to join our Chemistry Lab division. The successful candidate will support physical and chemical testing of raw materials, R&D, Method development / Stability and finished products using various analytical instruments / Equipment's and techniques to ensure compliance with internal specifications. Areas of Responsibility Prepare samples, Mobile Phase, Buffer solution, Dissolution Media, Sample digestion etc. for analysis according to standard operating procedures (SOPs) or as per suitable method provided by senior management. Perform chemical analyses using techniques such as UV-Vis, Dissolution, FTIR, titration, Microwave Digestion system, TOC water sample and physical testing using apparatus and equipment's' such as Disintegration, Bulk Density, Tap Density, Loss on Drying, Karl Fisher, etc. Accurately record, and report test results in compliance with GLP/GMP standards. Calibrate, maintain, and troubleshoot laboratory instruments and equipment. Example-pH meter, Weighing Balance, etc. Maintain a clean, organized, and safe work environment. Assist in the development and validation of analytical methods under supervision. Document laboratory activities and results in lab notebooks, Raw Datasheets, and on computer system with validated excel. Dispose of chemical waste properly and follow all environmental, health, and safety (EHS) protocols. Participate in quality audits and continuous improvement initiatives. Must be able to work extended hours as needed and occasional weekends. Other duties and responsibilities as assigned. Other Responsibilities Including Safety: Works in a safe and responsible manner to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: Associate's or Bachelor's degree in Chemistry, Biochemistry, or related scientific field. 0-3 years of hands-on experience in an analytical chemistry lab (academic or industrial). Strong understanding of laboratory safety and quality standards (e.g., GMP, GLP, ISO). Good problem-solving and organizational skills with attention to detail. Ability to work independently and collaboratively within a team. Certifications, Licenses, Credentials: N/A Skills & Ability Ability to maintain integrity and honesty at all times and to communicate with transparency. Ability to work independently or as part of a team. Solid understanding of cGMP's and GLP and is familiar with 21 CFR Part 11 Strong working knowledge of Microsoft Word, Excel. Good documentation practices and able to write simple, clear reports Meets commitments on time and practices time-management skills Seeks to identify continuous improvement needs Experience with Shimadzu LC2010, Nexera, GC2010, Thermo ICP-MS, Labsolution and Waters Empower Lab Software a plus. Physical Requirements (lifting, etc.): May execute 90%-100% of their work at the bench level either standing or sitting on a stool. Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment. Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. On occasion may need to lift up to 35 lbs. Ability to navigate office, lab, and/or plant floor working environments. Work Environment (Office, Warehouse, temperature extremes, etc.): Approximately 80% of work performed in a laboratory environment which may have unpleasant odors or hazardous conditions. Temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Office Hours: 8:30 AM - 5:00 PM 9:00 AM - 5:30PM

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

Quality Control Technician Industry Leading Benefits: Medical, Prescription, Dental, Vision, 401K, Pension, Short and Long Term Disability, Life Insurance, Tuition Reimbursement, Overtime as needed. As a Silvi Materials Quality Control Technician, one is responsible for ensuring that concrete chemistry and construction projects comply with plans and specifications. This position includes industry testing of concrete consistency, air, water, color, and chemical content. The qualified candidate will be able to communicate with and interact with construction personnel, inspectors, plant managers, and drivers concerning the concrete materials used on a particular job. Silvi Materials has been expanding our “A” Team of employees since 1947! Our team has grown to 15+ companies, employing over 850 people across 30+ locations in Southeastern Pennsylvania, New Jersey, and North Carolina. Silvi is large enough to provide the stability you need, but small enough that you can feel your individual contribution to our success. We value the fresh ideas and perspectives of each new member of our team. What does Silvi Materials offer you, you may ask? Phenomenal Benefits: Medical, Vision, Dental, Prescription, Vacation, Paid Holidays, and so much more! Your future in mind: With 401(k) (at select locations) and/or pension options. We want all employees to build a great retirement! Growth at Silvi Materials: We offer each employee the opportunity to move into any facet of our complex business. And our tuition reimbursement program is the perfect springboard to help you get there! So, what does a Silvi Materials Quality Control Technician do? You'll be an integral part of our Quality Control/Technical Services Team! Arrives at the plant or job site prior to the first concrete delivery. Performs the initial and ongoing testing of aggregate and concrete for gradation, moisture, slump, air content, and temperature After evaluation of the above factors, maintains contact with plant operations and/or QC, to ensure that necessary adjustments (if required) to the mixture are made. When the concrete comes to the job site places some of the batch in cylinders. In the lab, performs tests that measure the compressive strength of concrete cylinders. Compares that value to the design value to ensure compliance with specifications. Communicates information to the appropriate individuals/agencies. Directly handles concrete during various testing. Qualifications Required: Industry experience is preferred but not required. Some college or further education is preferred but not required. Travel with their own vehicle to and from various plants and client locations. Mileage and tolls will be reimbursed. Valid Driver's license. Work a wide variety of hours and be able to work a flexible schedule as per company and client needs. Is able to work overtime hours. Works Saturdays and night pours as required. Understand the various components that make up the product and how they interact with one another. Understand how to troubleshoot the various problems that occur with the product and how to correct them. Understand the proper techniques for testing concrete. Preferably is ACI Level 1 certified, or willing to undergo paid training and testing to obtain the certification. Has a valid driver's license and is willing to undergo an MVR check. Willing to work outdoors, in all weather, to handle the concrete testing on site. Lift up to 100 lbs of liquid concrete using a wheelbarrow. Physical Requirements In a typical work setting, people in this job: Lift 50 pounds regularly and up to 100 pounds on occasion. Use one or two hands to grasp, move, or assemble objects Stand for long periods of time. Kneel, stoop, crouch, bend, stretch, twist or crawl. Hear sounds and recognize the difference between them. See details of objects that are less than a few feet away. See differences between colors, shades, and brightness. Silvi Materials does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors.

Level One: At the direction of the Quality manager, level one quality technicians train to develop the ability to use predetermined methods, operations, setups, and prescribed specifications to perform in-process and completed inspection of products such as machined parts, mechanical assemblies, processed parts and purchased standard hardware. They also perform verifications of part identification and configurations. Level one quality technicians will arrange inspection queues to identify priority work. In addition, they will identify and segregate non-conforming product using basic knowledge and understanding of Geometric Dimension and Tolerancing methods per ASME 14.5, and common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gages, radius gages, protractors, profilometers, bore gauges, and dial indicators as necessary to complete assignments. Level one quality technicians will demonstrate blueprint reading and basic math skills, basic PC skills, including Microsoft Office and the ability to use MRP or ERP systems after instruction. Primary Duties & Responsibilities: Visually observe dimensional and functional characteristics of the product in final form. Perform first part on startup. Evaluate product manufacturing. Review all certifications for incoming material received. Perform in-process inspection of product during manufacturing and final inspection with use of optical comparators, thread gages, height gauges, calipers, micrometers and profilometer. Reconcile final inspection documentation for shipments. Perform all other duties as assigned. Required Skills: Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements. Effective oral and written communication skills. Ability to keep accurate records. Detail oriented and quick learning ability. Ability to follow documented procedures and standards. Excellent time-management skills with the ability to work independently with little supervision. Experience & Education 0-1 years of recent and relevant work experience or training High School Diploma or GED Some Engineering or technical training/background strongly preferred. Proficiency with general computer usage Familiarity with precision measurement tools (calipers, micrometers, etc.) preferred. Working Conditions/Physical Requirements: N-Never, O-Occasionally (80%) Exposure to Adverse Working Conditions: · Noise, Noxious Orders, Temperatures F · Hazardous Materials O Physical Conditions: · Close Eye Work (computers, typing, reading, writing) F · Sedentary (continuous sitting) O · Light Work (standing, walking, lifting C · Moderate Work (lifting 15-30 pounds, prolonged use of small hand instruments or tools) F · Moderately Heavy Work (lifting, moving, loading up to 35 pounds) O · Heavy/Hard Work (above average strength & stamina) O Travel Requirements: · None

A primary focus of this role is creating and modifying LIMS test plans to support QC activities while adhering to regulatory and data integrity guidelines. The LIMS Coordinator is responsible for tracking and managing laboratory inventories within the LIMS system and to perform and verify daily verification of laboratory data for accuracy and completeness, ensuring compliance with GxP standards before submission for review. Essential Functions: * Register samples and input relevant test results, instrument data, and laboratory information into the LIMS system as per QC procedures. * Manage laboratory inventories, ensuring timely replenishment and accurate record-keeping within the LIMS system as well as generate and run standard reports from the LIMS system for Laboratory Resource tracking. * Perform and verify daily verification data for accuracy and completeness before submitting it for review. * Create, troubleshoot and modify LIMS Test, worksheets, and test plans as needed to support QC activities. * Train new peers in LIMS operations, including sample manager and resource modules. * Assist QC personnel with sample registration and label generation using the LIMS software Additional Responsibilities: * Performs other functions as required or assigned. * Hands on to follow compendial (USP/EP/BP/JP) procedures for wet chemical tests. * Must understand and apply cGMP requirements applicable to quality control laboratory. * Follow up on sample status and testing progress within the LIMS system. * Participate in continuous improvement initiatives to optimize LIMS functionality and workflows.

Under the general direction of the Quality Control Manager, the Quality Control Inspector is responsible for the inspection of products with the objective of meeting quality initiatives in a diverse manufacturing environment. This is a full-time, on-site, non-exempt position. Essential Functions - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Document Receiving, First-Piece, In-Process and Final Inspections on AS9102 and similar reporting formats Roaming In-Process Inspections on the floor Visual inspections for general workmanship Manually balloon customer prints and create inspection reports, as needed Assist in calibration activities, as needed Prepare documentation packages, as needed Qualifications Experience/Education Able to read and understand blueprints with an emphasis of GD&T Able to use micrometers, dial indicators, optical comparators and height gages for inspecting dimensions as fine as .0002” Able to use attribute gages such as pins, thread gages Able to read and understand Military and other specifications. Have strong verbal and written communication skills Have a keen eye for detail CMM experience a plus Physical ability to stand for long periods Willingness to assist in all other duties as assigned

ProStaff Workforce Solutions is currently hiring a Quality Control Technician for our client in Neptune, New Jersey 07754. If you're interested, we'd love to connect with you and provide further details about this opportunity. Contract to Hire Schedule: Monday - Friday 7 am - 3:30 pm Pay Rate: $20/hr Job Summary: The Quality Control Technician - Will play a critical role in ensuring molded products meet quality standards based on standardize specifications. The primary objective of the Quality Control Technician is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. Key Responsibilities: • Perform thorough inspections of co-manufacture parts, product ingredients, and molded products. Check for defects, non-conformities, and deviations from quality standards. • Work closely with production teams to ensure that the manufacturing processes produce safe quality products. • Inspect molded parts continuously throughout the shift to ensure their quality and meeting specifications. • Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. • Reject all products and materials that fail to meet quality expectations. • Collect and take samples of production batch to ensure products are meeting standards. • Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. • Complete QC status report daily. • Be able to operate testing equipment for active water and moisture control of edible product • Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. • Continuous improvement of work instructions by providing feedback. • Be able to troubleshoot problems using critical thinking and coming up with solutions. • Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. • Prioritize food safety in the manufacturing environment, ensuring that quality control activities are carried out in accordance to safety protocols. • Follow the required SOP's / Work instruction (example CCP's; PC's; line clearance) • Follow the companies GMP regulations. • After Sanitation cleaning, be able to perform pre-operation visual inspection and ATP swab the equipment. • Other duties as assigned. Required Skills: • High school diploma or equivalent qualification. • Certification in quality control is preferred. • A minimum of 2 years' experience in a food safety environment. • Excellent knowledge of MS Office. • Good math, technical, and communication skills. • Strong understanding of quality control standards and testing techniques. • Required to walk and stand most of the day with occasional sitting to perform paperwork and measurements. • You must be able to lift up to 50 pounds while wearing required PPE in the area where you are working. About ProStaff Workforce Solutions We are a fast growing and successful agency that treats all its clients and candidates with a personal touch. ProStaff Workforce Solutions is a group of industry experts-many hailing from larger agencies-who know their business well and enjoy working in a more hands-on and flexible environment, with attention to detail. Our mission is to match quality people with quality jobs and quality companies to maximize productivity and profitability. We develop long-term relationships and provide a level of customer service and expertise that instill confidence and trust in our client companies and candidates. Our Values • Integrity • Commitment • Quality • Diversity Benefits for eligible employees • Direct deposit • Weekly pay • Medical benefits • 401(k) Plan Please visit us at https://www.prostaffworkforce.com/ to explore all opportunities. #ps #IND3

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. The Lead Quality Inspector serves as a Lead Associate, Quality Inspector for the Plainsboro Manufacturing Site, Collagen Manufacturing Center (CMC). The lead associate is responsible for performing and/or scheduling quality assurance inspections on purchased components, manufactured sub-assemblies and final product. Expectations are to be familiar with and be able to measure critical dimensions as well as to train new quality inspectors and provide guidance to current quality inspectors. Lead Associate, Quality Inspector will perform all duties in accordance with the requirements of overall corporate policies, FDA regulations, ISO 9001, ISO 13485, the medical device directive, and the other applicable regulatory agencies. This is for a Weekend Lead, the Shift is 12 hours on Friday, Saturday and Sunday from 6am to 6:30pm (will be compensated for 40 hours per week) Job Responsibilities Oversee daily activities in the QC department. Prepare the QC Inspection schedule to ensure that all manufacturing areas are covered in order to meet production schedule. Reports any non-conformances in timely manner. Support NCs and CAPA investigations as required. Assist with product flow between departments. Interface with Manufacturing department in order to coordinate inspections of completed product to ensure the inspections are done in a timely manner. Initiate and /or propose revisions to standard operating procedures involving new processes or process improvements. Train QC Inspectors as required. Perform inspections (incoming, in-process, first article, etc.) by using a variety of inspection measuring equipment to determine acceptance or rejection of material or parts. Interpret and work within the guideline of drawings, specifications, charts, procedures, and other date to determine product or material acceptance. Read and interpret sampling plan as per the American National Standard Institute (ANSI). Oversees physical and electronic quarantine locations. May also perform other related duties, responsibilities, and special projects as assigned. DESIRED MINIMUM QUALIFICATIONS Minimum of 5+ years' experience in document and promotional materials management using electronic document management systems or with manual systems using electronic document storage. Minimum of 5+ years' experience in a Quality Systems / Regulatory Compliance environment with a working knowledge preferably in the medical device, diagnostics or pharmaceutical industries. Familiarity with FDA regulations and ISO series of quality standards preferred. Capable of both written and verbal effective communication skills. Proficient in the Microsoft Office suite of products. Proficient in Oracle R12/Agile preferred. Salary Pay Range: $26.21 - $35.38 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

Full-time Description Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

Night Owl Needed! Be the Quality Guardian of Our Growing Team - Competitive Benefits Package! Do you have a keen eye for detail and thrive in a fast-paced environment? Are you a night owl looking for a challenging and rewarding career with a comprehensive benefits package? Then we want YOU on our team! As a Quality Inspector (Night Shift), you'll be the guardian of our quality standards in a great custom plastic manufacturing environment, ensuring every product meets our high expectations. You'll perform inspections, maintain records, and collaborate with the team to keep our production line running smoothly. This is your chance to: * Be a key player in a rapidly growing company * Work alongside a supportive and collaborative team in a great custom plastic manufacturing environment * Develop your skills and knowledge in quality control * Make a real difference in the quality of our products Here's a glimpse into your world: * Additional $3 per hour shift differential * Inspect parts and ensure they meet specifications * Maintain detailed records and document processes * Help develop and implement quality standards * And more! To be successful, you'll need: * 3+ years of experience as a Quality Inspector * A high school diploma (or equivalent) * Strong attention to detail and a commitment to quality * Excellent analytical and problem-solving skills * Ability to work independently and as part of a team * Willingness to learn and continuously improve * Familiarity with ISO 9001:2015, cGMP standards a plus Bonus points if you have: * Experience working in a cleanroom environment * Knowledge of SQF standards * Experience with gauge calibration or training others Benefits: * Medical, Dental & Vision Insurance: We offer comprehensive health coverage options to keep you and your loved ones well. * Company-Paid Life Insurance: We've got your back, with life insurance coverage included. * Optional Voluntary Benefits: Tailor your benefits package to your needs with a variety of additional options. * Paid Time Off & Paid Holidays: Recharge and relax with paid time off and holidays. * 401(k) with Company Match: Save for your future with our retirement plan and a company match on your contributions. * Profit Sharing: Share in the company's success with our profit-sharing program. Ready to join our growing team? Apply today and let's make quality happen - together! Shift Schedule & Hours This position follows a 2-3-2 rotating schedule. Schedule Example: Work: Monday, Tuesday Off: Wednesday, Thursday Work: Friday, Saturday, Sunday Off: Monday, Tuesday Work: Wednesday, Thursday Off: Friday, Saturday, Sunday (The pattern then repeats.) Shift Hours: Day Shift: 6:30 AM - 7:00 PM Night Shift: 6:30 PM - 7:00 AM