Quality control inspector jobs in Trenton, NJ - 238 jobs

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Geo-Technology Associates, Inc. (GTA) is seeking a STRUCTURAL STEEL SPECIAL INSPECTOR with 2-7 years of relevant test experience for work in the Somerset, NJ area. SPECIAL INSPECTOR RESPONSIBILITIES: Verify construction is being completed in accordance with all plans and specifications. Carry out inspections, sampling, and testing. Coordinate with clients, general contractors and GTA Project Managers. Record and document construction in daily field reports Contribute to the generation of technical reports and special inspection summaries. Oversee, train, and mentor junior/less-experienced staff. SPECIAL INSPECTOR REQUIRMENTS: At least one of the following: NJ DCA/ICC Structural Steel Bolting NJ DCA/ICC Structural Steel Welding CWI Certifications preferred (not required): NJ DCA/ICC (Soils, Structural Masonry, Reinforced Concrete, etc.) ACI Certified Construction Special Inspector (CCS), ACI Concrete Field-Testing Technician Grade 1, ACI/CRSI Certificate for Post-Installed Concrete Anchor Installation Inspector Own reliable transportation, valid driver's license and satisfactory driving record. Authorized to work in the U.S. Ability to work independently and as a part of a team Ability to lift up to 75 lbs. unaided and up to 100 lbs. with assistance: frequent bending, hammering and repetitious movements. Proficient with Microsoft Word, Excel, PowerPoint and Adobe We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof. #LI-Onsite #breezy GTA

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. The Quality Inspector II will be responsible for performing quality assurance inspections on purchased components, manufactured sub-assemblies and final product. The Quality Inspector will perform all duties in accordance to the requirements of overall corporate policies, FDA regulations, ISO 9001, ISO 13485, the medical device directive, and the other applicable regulatory agencies. Expectations are to be familiar with and able to measure critical dimensions. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform inspection by using a variety of inspection measuring and test equipment to determine acceptance or rejection of material or parts. Perform first article, incoming/receiving, and in-process inspections of materials or parts; determine acceptance or rejection after inspection and/or testing of materials, parts, and/or equipment. Interpret and work within the guideline of drawings, specifications, charts, procedures, and other data to determine acceptance or rejection of materials. Read and interpret sampling pan as per the American national standard institute (ANSI), Assist in the review and disposition of non-conforming material and customer returned material, including rework, scrap, and return to vendor. Maintain accurate and current inspection and/or testing records such as nit not limited to Material Certifications, Inspection/Test Results and reports, Certificates of Conformance, Rejection reports/tags, as required by applicable procedure and/or specification. Coordinate and inform other departments of inspection and/or testing status in support of production and project goals and initiatives. Promote and participate in continuous improvement initiatives. Responsible for the maintenance of appropriate conditions of all quarantine locations. Maintain the QC inspection areas in an orderly fashion conducive to carrying out safe and efficient inspections and procedures. Inspection requirements include training and working in classified clean rooms as necessary to perform in process inspections. Maintain records of inspection and all testing performed on the appropriate test records. Perform line clearances and quality reviews in manufacturing, labeling, or other assigned areas during manufacturing activities. Identify and implement opportunities for continuous improvement, including document revisions in order to maintain accurate SOPs. Provide quality support to various departments as needed, e.g. engineering, product development, etc.) Assist in training new associates according to the Quality System Regulations and company SOPs as applicable. May also perform other related duties, responsibilities, and special projects as assigned. DESIRED MINIMUM QUALIFICATIONS Associate degree in science is preferred. 3-7 years of relevant GMP/GLP experience specific to incoming, line clearance, in-process, and finished goods inspections in pharmaceutical or medical device industry. QA experience in the medical device industry preferred. Must have strong written and verbal communication skills. Strong organizational skills, self-directed, strong problem solving and interpersonal skills. Knowledge of CAPA, Validations, Change Control, preferred. Working knowledge of ISO 13485, 21CFR820 FDA QSR, and cGMP. Knowledgeable in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) preferred. Salary Pay Range: $21.12 - $27.98 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

Full-time Description Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

SUMMARY: This position completes all or any combination of, inspection and/or testing tasks required to ensure that manufactured items conform to company and industry quality standards as well as to contract specifications when required. These duties require a high degree of accuracy and attention to detail. SPECIFIC DUTIES/RESPONSIBILITIES: * Inspects and measures materials, products, and work for conformance to specifications and standards throughout the manufacturing cycle. * Accurately uses all standard measuring tools, including, but not limited to, rulers, calipers, and force gauges. * Interprets blueprints, data, and other materials to determine specifications, inspection and testing procedures, and measuring instruments required. * Records inspection data and quantities inspected on required inspection reports. * Collects and files inspection and test records in accordance with established record maintenance procedures. * Notifies supervisors and other personnel of production quality problems and assists in identifying and correcting these problems * Discusses inspection results with those responsible for products and recommends necessary corrective actions. * Completes all required record keeping, including time sheets, traceability forms, etc. * Understand part numbers and revision levels * Inspects customer repairs as needed. * Assist with the training of new inspectors as needed * Performs other related duties as required or assigned. * Follows company rules and procedures. QUALIFICATIONS: * 1 to 2 years quality inspection experience in manufacturing. * Functionally literate including able to read and write English documents. * Able to perform basic computations (add, subtract, multiply, divide in all units of measure using whole numbers, fractions, and decimals). * Capable of accurately using standard measuring tools. * Capable reading and interpreting manufacturing drawings and work specification sheets. * Detail oriented and able to maintain high accuracy standards. * U.S. citizen, permanent resident alien or otherwise able to review all export-controlled technical information EXPERIENCE: Six months to one year experience as a QC inspector in a manufacturing environment EDUCATION: High school diploma or GED WORK ENVIRONMENT: The work environment for this job is a manufacturing shop floor. The noise level is usually moderate due to sewing machines and traffic. PHYSICAL DEMANDS: The position requires that the employee is regularly required to sit, talk, and hear. The employee is frequently required to use hands to fingers such as with a keyboard. The employee is occasionally required to stand; walk; reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds. The employee must occasionally lift and/or move up to 25 pounds without assistance. Specific vision abilities include close, distance, and color vision and the ability to adjust focus. SALARY RANGE: $18.45 - $20.64 / hour Apply / Submit Your Resume Your Name* Your Email* Additional Information (optional) (Word file or PDF only) Max file size: 5MB Website URL* Upload your resume* Please type the characters* This helps us prevent spam, thank you. Submit

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

Job DescriptionQuality Control Inspector - Level III The Level III Inspector is responsible for performing complex first article, in-process, and final inspections to ensure that precision machined components, assemblies, and products meet all customer and company quality standards. Work involves inspection of diversified, tight-tolerance parts for industries such as aerospace, medical, defense, and semiconductor manufacturing. Responsibilities may also include supplier audits and qualification activities. This position requires extensive hands-on experience with precision machining processes, engineering drawings/blueprints, and Geometric Dimensioning and Tolerancing (GD&T). The Level III Inspector develops inspection procedures, designs specialized gauging or measurement setups, and uses a range of precision and electronic measuring instruments. The role also includes programming and setup of Coordinate Measuring Machines (CMMs) and OGP vision systems, as well as training other inspectors in their use. Primary Responsibilities Verify that precision machined parts and assemblies meet all customer and internal specifications for quality and conformance. Accurately document all inspections and verifications through signatures, stamps, or electronic records. Review and confirm the completeness and accuracy of supplier certifications. Lead quality initiatives for assigned customers and support general quality efforts across all programs. Mentor and train Level I and Level II inspectors on inspection techniques, control plans, and FAI (First Article Inspection) reporting. Serve as the primary trainer for CMM and OGP vision system programming and operation. Promote and maintain a safe, organized, and 5S-compliant work environment. Support workload management within the inspection area to ensure efficiency and accuracy. Perform additional duties as directed by management. Knowledge and Skill Requirements Extensive experience inspecting precision machined components and tight-tolerance mechanical parts. Thorough understanding of engineering drawings, blueprints, and GD&T, with the ability to interpret and train others in these standards. Strong knowledge of both English and Metric measurement systems. Proficiency with statistical tools and variance analysis. Skilled in the use of precision measuring instruments and electronic devices (micrometers, height gages, surface plates, comparators, CMMs, OGP systems, etc.). Ability to interpret customer specifications, national standards, and technical documentation. Strong communication, mentoring, and collaboration skills with the ability to work effectively with employees, management, and customers. Physical Requirements Annual eye examination and one-time Ishihara (Color Blindness) Test required from an accredited eye care professional. Working Conditions Standard manufacturing and inspection environment. May require light lifting, standing, walking, and sitting for extended periods. Occasional local travel and weekend work may be required

Under the general direction of the Quality Control Manager, the Quality Control Inspector is responsible for the inspection of products with the objective of meeting quality initiatives in a diverse manufacturing environment. This is a full-time, on-site, non-exempt position. Essential Functions - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Document Receiving, First-Piece, In-Process and Final Inspections on AS9102 and similar reporting formats Roaming In-Process Inspections on the floor Visual inspections for general workmanship Manually balloon customer prints and create inspection reports, as needed Assist in calibration activities, as needed Prepare documentation packages, as needed Qualifications Experience/Education Able to read and understand blueprints with an emphasis of GD&T Able to use micrometers, dial indicators, optical comparators and height gages for inspecting dimensions as fine as .0002” Able to use attribute gages such as pins, thread gages Able to read and understand Military and other specifications. Have strong verbal and written communication skills Have a keen eye for detail CMM experience a plus Physical ability to stand for long periods Willingness to assist in all other duties as assigned

A primary focus of this role is creating and modifying LIMS test plans to support QC activities while adhering to regulatory and data integrity guidelines. The LIMS Coordinator is responsible for tracking and managing laboratory inventories within the LIMS system and to perform and verify daily verification of laboratory data for accuracy and completeness, ensuring compliance with GxP standards before submission for review. Essential Functions: * Register samples and input relevant test results, instrument data, and laboratory information into the LIMS system as per QC procedures. * Manage laboratory inventories, ensuring timely replenishment and accurate record-keeping within the LIMS system as well as generate and run standard reports from the LIMS system for Laboratory Resource tracking. * Perform and verify daily verification data for accuracy and completeness before submitting it for review. * Create, troubleshoot and modify LIMS Test, worksheets, and test plans as needed to support QC activities. * Train new peers in LIMS operations, including sample manager and resource modules. * Assist QC personnel with sample registration and label generation using the LIMS software Additional Responsibilities: * Performs other functions as required or assigned. * Hands on to follow compendial (USP/EP/BP/JP) procedures for wet chemical tests. * Must understand and apply cGMP requirements applicable to quality control laboratory. * Follow up on sample status and testing progress within the LIMS system. * Participate in continuous improvement initiatives to optimize LIMS functionality and workflows.

Job DescriptionOVERVIEW: Quality Control Technician:The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM QUALIFICATIONS: Quality Control Technician: High school diploma or equivalent qualification. Certification in quality control is preferred. Must have food manufacturing experience. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. KEY RESPONSIBILITIES: Quality Control Technician: Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carried out correctly. Inspect finished produced goods to ensure their quality and adherence are up to specifications. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Collect and take samples of production batch to ensure products are meeting standards. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Conduct internal audits of manufacturing processes and procedures to ensure ongoing compliance with quality standards and regulations. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job DescriptionDescription: Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements: Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful.

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability