Quality control inspector jobs in Union City, NJ

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

Resillion is a strategic partner for quality assurance. We offer worldwide services on the field of quality technology, testing, conformity, interoperability and assurance, from initiation to launch - for the software system, cybersecurity, the device, digital products and media content. With a passion for quality, Resillion provides end-to-end solutions to support customers in their strategic digital initiatives and offers a holistic approach for both software and hardware. Via our office in Europe, the United Kingdom, the USA, India and China, we bring together more than 500 experts who are committed to success. We combine the best human and artificial intelligence (AI) on advanced solutions for quality technology in the liver. Resillion offers deep sector knowledge and works together with the world's leading companies in telecom, media, energy & utilities, health care, finance and consumer electronics. ***************** Job Description Set up playback devices, QC bays and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) Qualifications Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid Clipster proficiency including building. cp files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Basic Minimum Qualifications: 3 to 5 years' experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship. Additional Information Location: New York, NY Employment Type: Part-Time- On as needed basis Schedule: Swing Shift Salary: $25.00-28.00 Per Hour

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess : Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.

The Quality Inspector will complete visual inspection of printed card assemblies and sub-assemblies. They will review paperwork, complete computer entry, read and interpret drawings and documents. They will interface with production line and visiting customers. They will also work in clean room environments. Required Skills Good written and verbal communication skills. Problem solving and analytical skills a plus. Keen attention to detail. Basic computer and math skills to measure specifications. Ability to use measuring devices such as gauges, meters, calipers and computers. Experience with workmanship specifications JSTD-001 and IPC-610 certifications required MIL-STD 38534, MIL-STD 38535 preferred EOE/Disability/Veteran This position is onsite We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Job DescriptionDescription: : Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program Requirements:

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role Description: Arcadis is seeking a highly skilled and motivated Quality Inspector to support one of the most iconic and consequential infrastructure initiatives in the United States - the Gateway Hudson Tunnel Project (HTP). In this role, you will be responsible for conducting inspections, audits, documentation reviews, and collaborating with project teams to resolve quality issues. We are working in partnership with Parsons and Mace as part of the MPA Delivery Partner team, selected by the Gateway Development Commission to deliver this transformative project. The HTP is a critical component of the broader Gateway Program - one of the most ambitious and impactful transportation initiatives in the nation - and is designed to strengthen mobility, enhance resiliency, and ensure the long-term reliability of the Northeast Corridor. The project encompasses the construction of a new, two-track rail tunnel beneath the Hudson River, along with the full rehabilitation of the existing 113-year-old North River Tunnel. This vital infrastructure supports more than 200,000 daily passengers via Amtrak and NJ TRANSIT and serves as a backbone for economic activity and connectivity between New York and New Jersey. This is more than just a job - it's a once-in-a-generation opportunity to contribute to a nationally significant infrastructure program that will reshape rail transportation, drive sustainable economic growth, and improve regional accessibility for millions. As part of this high-performing, multidisciplinary team, you will help deliver excellence on one of the most technically complex and high-profile projects in the world. If you're seeking to make a meaningful, lasting impact - while advancing your career alongside some of the best minds in the industry - this is your moment. Role Accountabilities: Quality Assurance & Control * Conduct inspections of construction activities, materials, and workmanship to verify compliance with project specifications, drawings, and standards. * Support the implementation of the project's Quality Management Plan and related procedures. * Perform quality audits of contractors and subcontractors to confirm adherence to package-specific quality processes and procedures. * Review and verify contractor compliance with approved testing and inspection plans, including evaluation of test results and maintenance of up-to-date testing logs. Documentation & Reporting * Review quality documents from contractors and provide feedback and recommendations to project management and stakeholders. * Maintain systematic, retrievable records of all testing, inspection, acceptance activities, and outstanding punch list items. * Document any nonconforming work in Nonconformance Reports, verify completion of corrective actions, and monitor resolution of quality issues. * Prepare and submit quality-related reports, including daily, monthly, and quarterly summaries as required. Materials Testing & Inspection * Coordinate and monitor materials testing required under project contracts, including off-site lab testing performed by independent testing organizations. * Ensure that all materials used in construction meet specified standards and regulatory requirements. Project Coordination * Collaborate with resident engineers, contractors, and other project team members to resolve quality issues and support continuous improvement. * Participate in meetings, technical briefings, and coordination sessions related to quality assurance and control. Compliance & Safety * Ensure all quality activities comply with federal, state, and local codes, standards, and permitting processes. * Support the implementation of safety management plans and procedures as they relate to quality assurance. Required Qualifications: * Bachelor's degree in civil engineering, construction management, or a related field preferred. * Minimum 3 years of experience in quality inspection, quality assurance, or construction management on large-scale infrastructure or transportation projects. Key Skills and Abilities: * Knowledge of construction methods, quality assurance processes, and materials testing. * Familiarity with document control, inspection procedures, and quality management systems. * Proficiency with Microsoft Office and basic project management software. * Strong attention to detail and organizational skills. * Proactive attitude, eagerness to learn, and ability to take initiative. * Ability to work collaboratively in a team environment and communicate effectively with engineers, contractors, and stakeholders. * Willingness to work in the field and adapt to changing project needs. * Understanding of federal, state, and local codes, standards, and permitting processes is a plus. * Commitment to safety, quality, and continuous improvement. Preferred Qualifications: * Experience with federally funded projects and regulatory compliance is preferred. * Experience working on tunnel, rail, or major transportation infrastructure projects. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $95,000 - $155,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. Join Arcadis. Create a Legacy. #LI-BB1 #LI-ONSITE #ANA-Mobility-Jobs #ANA-Construction #ANA-Gateway

TopView Sightseeing is seeking a sharp, reliable, and observant Quality Control Inspector to help maintain high service standards across our sightseeing operations, including bus, boat, and bike tours. This full-time, field-based role plays a key part in ensuring safe, high-quality experiences for thousands of daily customers across New York City. Responsibilities: Conduct undercover inspections of service quality across all TopView locations and brands Monitor employee conduct and adherence to safety protocols and company standards Perform passenger counts and compile data for internal industry analysis Inspect competitor operations and provide detailed reports Document and report inspection results, policy violations, and improvement suggestions Collaborate with operations leadership to enhance service quality Requirements: High school diploma or GED Experience in supervision, inspection, or monitoring preferred NYC tourism experience is a plus Strong attention to detail and ability to collect and report accurate data Must have a smartphone and familiarity with Google Apps Professional, trustworthy, and presentable Excellent communication skills and a proactive attitude Must be comfortable working 100% in the field, including weekends and holidays Benefits: Health insurance 401(k) Paid time off Join a fast-growing company and help shape the quality of NYC's top sightseeing experiences-apply today! Powered by JazzHR AEzMzKURVa

Join Weiss-Aug - A Leader in Precision Manufacturing and Innovation Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. We're currently seeking a passionate and skilled QC Inspector - 2nd Shift to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. In this role you perform visual and mechanical inspection of first piece, in-process, and final inspection of multiple jobs to support production. Shift Schedule: 2:00 pm - 10:30 pm Responsibilities Completes visual and mechanical inspections based on control plan, drawing, spec sheets and procedures. Able to expedite and prioritize workload. Works with die setters, engineers, and/or managers in meeting the company quality policy by providing written and verbal communication related to specifications and data in a clear concise manner. Quarantines product, performs transactions in ERP system, creates and maintains detailed records of inspections on various forms, prepares data packages for shipments. Works with QC Inspector III, engineers, or managers. Supports management initiatives to improve the efficiencies such as creating and updating key quality documents such as visual standards and inspection instructions. Requirements High School graduate or equivalent 1-3 years of inspection experience in close tolerance manufacturing Must have a good understanding of GD&T to be able to interpret part specifications. Must be able to use skillfully metrology equipment such as all hand gauges, microscopes, comparators. Must be organized and able to maintain a clean workspace. Must have the ability to use a computer with minimal training. Must be able to quickly adapt to using Microsoft and Adobe software to create key quality documents. This position is at our East Hanover, NJ location. Pay Range: $23-$26/hr Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Job Description Quality Inspector - Hudson Tunnel Project | New York / New Jersey About the Company & Project Our client is a leading global construction consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Quality Inspector for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Quality Inspector, you'll play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our clients purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities Perform site inspections to assess construction methods, materials, and workmanship for alignment with project specifications and regulatory standards. Assist in executing and monitoring the Quality Management Plan, ensuring procedures are properly followed throughout the project lifecycle. Conduct audits of contractors and subcontractors to confirm compliance with defined quality protocols and package-specific requirements. Review contractor testing and inspection plans, evaluate test results, and maintain accurate testing logs. Provide feedback on quality documentation and support project management with actionable recommendations. Maintain organized records of inspections, testing, acceptance activities, and punch list items. Document nonconforming work, track corrective actions, and monitor resolution of quality issues. Coordinate and oversee materials testing, including off-site lab work by independent organizations. Collaborate with engineers, contractors, and stakeholders to resolve quality concerns and drive continuous improvement. Ensure compliance with all relevant codes, standards, and safety procedures related to quality assurance. Qualifications: Bachelors degree in civil engineering, construction management, or a related discipline (preferred). Minimum 3 years of experience in quality assurance, inspection, or construction management on large infrastructure or transportation projects. Familiarity with federally funded projects and regulatory compliance is an asset. Solid understanding of construction practices, materials testing, and quality control procedures. Experience with document control systems and quality management frameworks. Proficient in Microsoft Office and basic project management tools. Strong organizational skills and attention to detail, with the ability to work collaboratively across teams. Comfortable working in field environments and adapting to evolving project demands. Demonstrated commitment to safety, continuous improvement, and professional growth. This is an excellent opportunity for a Quality Inspector looking to work on the most challenging, high-profile and innovative projects. If you're an ambitious professional who thrives in a client-facing role and enjoys delivering solutions that drive project success, we encourage you to apply. Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status. Why this is a Great Opportunity Full-time position with competitive compensation Opportunity to work in a client-facing role delivering significant and impactful capital projects. Collaborative and supportive work environment with the opportunity for growth in your career Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k).

Job Title: Quality Control (QC) Inspector Company: Hansome Energy Systems Employment Type: Full-Time Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move. Position Overview Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections. Key Responsibilities Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components. Verify parts and assemblies against drawings, specifications, and quality standards. Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment. Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity. Document inspection results, discrepancies, and nonconformances clearly and accurately. Assist with root-cause investigations and corrective actions when defects are detected. Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications. Ensure products meet all requirements before release to the next production stage. Collaborate closely with production, engineering, and quality teams to resolve issues. Support continuous improvement and maintain compliance with internal and external quality requirements. Qualifications Required High school diploma or equivalent. 1-3 years of experience in quality inspection or manufacturing. Strong understanding of mechanical drawings, tolerances, and inspection requirements. Proficiency with measurement tools such as calipers, micrometers, and gauges. Strong attention to detail, accuracy, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move. Must be a US Citizen Preferred Experience in defense, aerospace, or other high-reliability manufacturing environments. Familiarity with quality systems such as ISO 9001 or MIL-STD requirements. Experience with nonconformance reporting (NCR), MRB processes, or internal audits. Basic electrical knowledge or experience inspecting rotating electrical equipment. Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.). Work Environment Full-time, on-site QC inspection role. Work involves manufacturing floor, inspection stations, and documentation work areas. Exposure to shop environments, machinery, and moderate noise (with proper PPE). Quality- and safety-focused culture supporting defense and industrial programs. Benefits Competitive compensation Health, dental, and vision insurance Paid time off and holidays Retirement plan options Ongoing training and skill development Opportunity to ensure quality for products supporting U.S. Navy and critical applications How to Apply Qualified candidates are encouraged to submit their resume and/or application to the Hansome Energy Systems hiring team.

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment. Collect and report data to be presented to the customer for reporting purposes. The Quality Technician is responsible for providing inspection and administrative support in order to ensure that all general matters in Quality are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality Technician is a hands-on representative of the Quality department whose job is to help ensure all basic visual and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. Support generation of FAI and corresponding documentation. Review incoming FAI to ensure compliance to Collins and AS9102 standards. Any other function(s) as assigned by management Maintain calibration records Maintain tools Perform other related duties as assigned. Qualifications You Must Have Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract MSOffice skills Knowledge of GD&T PHYSICAL DEMANDS: Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. May be exposed to uncontrolled environmental conditions. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an Inspector II Petroleum to join our Caleb Brett team in Carteret, NJ. This is a fantastic opportunity to grow a versatile career in the Petroleum Inspection field. Intertek is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. What are we looking for? The Inspector II Petroleum is responsible for measuring, sampling, and reporting findings on bulk petroleum and refined products. This position will travel at least 30% of the time. Shift/Schedule: Inspector will work six consecutive days, followed by two days off, on an on call / as needed basis. This includes holidays and weekends. Salary & Benefits Information The base wage or salary range for this position is $25 - $35 per hour. Individual compensation packages are based on a variety of factors unique to each candidate including skill set, experience, qualifications, and other job-related reasons. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, rail cars, tank trucks and vessels. Custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks and vessels. Perform routine equipment calibration, verification and function checks. Verify and communicate the results obtained and make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. Provide on the job assistance and receive training from more experienced inspectors. Communicate and coordinate with terminal, transport and company personnel to promote smooth exercise of duties assigned. Monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. Organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. Maintain work areas, records and equipment in a clean, organized and functional condition. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have grasp of basic mathematics including fractions and work in an automated environment. 6 months experience. Ability to work on an on-call basis, including weekends and holidays. Valid Driver's License and reliable driving record required. Reliable Personal Transportation Required. Work vehicle provided; business use only. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Model Intertek's 10X Energies at all times within the workplace, practicing business the right way. Be aware of, and adhere to, safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to work in fast-paced, multi-tasking environment with shifting priorities and demanding deadlines. Must be detailed-oriented and able to effectively prioritize and organize workload, with efficient time management. Ability to communicate and interact effectively in verbal written and presentation formats. Must possess the fundamental technical and administrative skills required to perform the job duties. Must be customer focused and quality driven. Ability to travel as business needs dictate. Preferred Requirements & Qualifications: IFIA/TIC Council certification TWIC credentials 1 year experience as a Petroleum Inspector

Job DescriptionDescription: A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements: Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Job Description General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. Conduct in-process inspections at specified intervals to monitor quality and verify requirements. Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. Accurately record inspection results in logs, check sheets, or digital systems. Complete First Article Inspection Reports (FAIRs) as required. Communicate non-conformances promptly to machinists, supervisors, or the quality manager. Work closely with machinists, programmers, and setup personnel to validate machine setups. Provide feedback to promote continuous improvement. Ensure inspection activities comply with company standards and ISO/AS requirements. Support calibration and proper use of inspection tools. Maintain adherence to safety protocols and 5S practices. Ability to detect deviations and recommend corrective actions. Identifies potential quality risks after they become issues. Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required High school diploma or equivalent. 2+ years of experience in machining, manufacturing, or inspection environment Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) Ability to read and interpret blueprints and technical specifications Strong attention to detail and problem-solving skills Good written and verbal communication skills Experience with ISO 9001, AS9100, or similar quality management systems Familiarity with statistical process control (SPC) Knowledge of ERP/MRP systems or digital quality management tools. Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements Ability to stand, walk, or sit for extended periods. Ability to lift to 50 lbs. occasionally. Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

NYC Health + Hospitals is the largest public health care system in the nation. We are a network of 11 hospitals, trauma centers, neighborhood health centers, nursing homes, post-acute care centers, and correctional health services. We are a home care agency and a health plan, MetroPlus. Our health system provides essential services to 1.4 million New Yorkers every year in more than 70 locations across the city's five boroughs. Our diverse workforce of more than 42,000 employees are uniquely focused on empowering New Yorkers. NYC Health + Hospitals/Correctional Health Services is one of the nation's leading correctional health care systems in quality of and innovations to care, and access from pre-arraignment through compassionate release. In-jail services include medical, nursing, mental health, substance use treatment, social work, dental and vision care, discharge planning, and reentry support. In addition to providing direct patient care in the jails, CHS leverages the resources of the nation's largest municipal health care system to help discharged patients successfully return to their communities. CHS is also a pivotal partner in New York City's criminal justice reform efforts. Work Shifts Time: 8a-4p Days: Mon-Fri Facility: CDU-WF facility on Rikers Island Duties & Responsibilities The Quality Assurance (QA) Radiological Technologist position encompasses responsible, administrative and clinical activity of varying degrees of latitude. Clinical level judgement is needed in the daily supervision of radiological functions and patient care, and departmental projects. Responsibilities include: Review exam orders, consult with radiologist, schedule patients and arrange for transportation as indicated. Identify patient and document all information pertinent to final report in the RIS and on images (PACS). Prepare all patients (infants, children, adolescents, adults and geriatric) for radiological procedures requested by the clinician. Arrange for proper protection of patients, public and staff from infectious diseases/materials. Perform all general diagnostic imaging and routine examination in CT and Angiography. Assists in performing daily checks of radiographic imaging equipment, immobilization devices and other necessary accessories. Enters data and maintains documents and logs as required and mandated by the department QA guidelines and various regulatory agencies. Maintains adequate stocks of supplies and materials needed for use in the department. Checks equipment for defects prior for use and assures proper use of such equipment through instruction and review. Report any unexpected patient incidents in accordance with the occurrence report protocol. Maintain and exercise all mandated radiation safety regulations. Maintain basic care of all the imaging equipment. All malfunctions are to be reported to management staff whether mechanical, electrical or suspect and service request documentation completed. Maintain a clean and safe work environment for both patients and staff. Perform other duties as deemed necessary (by supervisory or administrative staff) in the event of emergencies or disasters. Continue professional growth and development of job-related skills on an ongoing basis. Participate in continuing education activities. Ensure all examinations are accessioned, documented and sent to PACS for reading. Monitor PACS and RIS incomplete worklists to ensure all exams are completed. In accordance with HIPAA (the Health Insurance Portability and Accountability Act), staff members will exercise due diligence in ensuring patient privacy and confidentiality. Identifies activities that the network has implemented to promote patient safety and takes all necessary precautions to ensure a safe environment for patients, visitors and staff. In addition to the Radiology Technologist job functions, the QA Technologists is responsible for the following: Organize and file maintenance reports for each building in regards to dentistry and radiology x-ray equipment and ensure dentistry and x-ray equipment follow the Department of Health codes, policies and procedures. Participates in quality assurance activities, including coordination, control and maintenance of technical equipment. Establish a daily/weekly/monthly quality control routine for monitoring, evaluating, and maintenance of X-ray equipment to ensure optimal performance and stability. Documenting and maintaining records for the quality control program in accordance with applicable regulations, legal requirements, accrediting agencies and recommendations from equipment manufacturers. Performs research and participates in special projects involving evaluation of equipment and delivery of service. Work with our radiologists to obtain updated documentation of primary diagnostic monitors. Distribute/collect dosimeter badges from each employee/facility that works with x-ray equipment. Recommends area assignment of personnel to coordinate activities within the department with other activities and services and represents the department in interdepartmental operations and meetings. May be assigned duties and responsibilities of X-ray Director in regards to radiology department workflow. Minimum Qualifications Assignment Level III 1. For Supervisory Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and two (2) years of Radiologic Technologist experience performing duties consistent with Assignment Levels I and II, one (1) year of which must have been in a supervisory capacity. 2. For Specialized Imaging Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and possession of a current advanced- level certification for the performance of these procedures. Department Preferences Possession of a current valid license as a General Radiological Technologist issued by the State of New York. A minimum of two years of experience as a Radiological Technologist. A current member of the American Registry of Radiologic Technologists (ARRT). Valid BLS required. Must possess a valid driver's license. Must be proficient in Microsoft Office Suite. Additional Salary Compensation All Radiologic Technologists in Assignment Levels II and III shall receive a differential of $7,500 per annum to be cross-trained on different modalities of radiologic imaging and to be cross-assigned (once trained) to different imaging settings depending on patient volume and staffing needs within a facility. Benefits NYC Health and Hospitals offers a competitive benefits package that includes: Comprehensive Health Benefits for employees hired to work 20+ hrs. per week Retirement Savings and Pension Plans Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts Loan Forgiveness Programs for eligible employees College tuition discounts and professional development opportunities College Savings Program Union Benefits for eligible titles Multiple employee discounts programs Commuter Benefits Programs

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess: Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.