Quality control inspector jobs in Utica, NY

Job Description With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: Competitive Pay Competitive Health Insurance Paid training and certification with cash bonuses for successful completion Advancement career and opportunity planning Company vehicle for travel to project sites Paid Vacations/Sick/Personal/Holidays Safety training and equipment provided 401(k) Retirement Savings Plan with company match Certified Welding Inspector (CWI) Qualifications: Strong written and verbal communication skills Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations. Proficient in Microsoft Office Ability to work with AWS & AISC codes One or more of the following certifications is required: ICC Structural Steel and Bolting Special Inspector, ICC Structural Welding Special Inspector, AWS CWI, AWS CAWI, SSPC, AMPP or ASNT NDT Certified Welding Inspector (CWI) Responsibilities: Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State. Perform special inspections in accordance with the applicable building code requirements. Review project plans and specifications. Review and perform welding procedure and performance qualification testing. Routinely and effectively communicate with colleagues, contractors, and clients. ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders.

As a valued member of our team, you will conduct first piece, incoming, in-process and finished goods inspections as directed by the Q.C. Manager or Supervisor. You'll maintain the necessary records to meet both company and customer documentation requirements. Additionally, you'll evaluate and document Customer Returns, ensuring our high standards of quality are consistently met. Tasks and Responsibilities: Conduct First Article Inspection on new products and/or revised products. Inspection throughout the entire manufacturing process including inspection of raw materials, parts, sub-assemblies and finished goods. Ensure appropriate action is taken when non-conforming material is found. Make production run or hold recommendations based on the critically of the defect. Ensure operators are processing or assembling material according to Work Orders and/or BOM. Communicate discrepancies to the attention of the Supervisor, Assistant Q.C. Manager and Q.C. Manager Document performed inspections including non-conforming product found during the inspection process. Create DMR's in Epicor for all non-conforming product. Operate basic measuring devices like micrometers, calipers, height gages, etc. Follow Q.C. procedures, plans and test procedures as outlined Examine, disposition and document customer returns. Maintain good housekeeping and safety in all of the quality control work areas Prompt completion of tasks assigned by Quality Management. All other tasks so assigned. Who You Are: High school diploma or equivalent education required Prior experience in Quality Control and/or Manufacturing preferred You are detail-oriented, capable of reviewing and documenting a high volume of product evaluations You are a skilled written and verbal communicator You possess excellent time management skills and can prioritize various tasks as assigned by the Quality Control Manager to ensure their completion in a timely manner You are capable of operating basic measuring devices (such as micrometers, calipers, height gauges, etc.) You are a team player who likes to work collaboratively Second and third shift employee must be able to train on first shift The Fountainhead Group, Inc. is a family-owned and operated company, dedicated to the success and longevity of our business, our employees, and our community. For more than 130 years, FGI has been creating, innovating, and manufacturing liquid sprayer products for the world's top brands and retailers, driven by the hard work of our FGI Family of employees. Across four manufacturing and distribution centers in CNY, our commitment to the betterment of our employees and our community is demonstrated in our robust philanthropy and volunteer programs, supporting more than 350+ local nonprofits and ensuring the success of the community for generations of the FGI Family to come. The Fountainhead Group Inc. is an AAE/EEO employer. In addition to a competitive salary, we are pleased to offer the following benefit package: Medical Dental Paid Vacation Holiday Pay 401k with employer match up to 2% Tuition Reimbursement Health Reimbursement Account (HRA) Flexible Spending Account (FSA) Employer paid Life Insurance Employee paid Voluntary Life and Short Term Disability Coverage Company Website ************************************* To learn more about our company culture and commitment to the local community, visit the “Community” page of our website and be sure to follow our Facebook account for exciting updates and events! ************************************** *************************************

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? We provide full construction support for our field staff throughout the entire assignment. We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more. It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates. We provide paid orientation/training and attentive management support including 24/7 emergency contact. We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots). We reimburse work related mileage and tolls. We pay for work related certifications including paid time off to take test and cost of testing. Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s). Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance. This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment. Utilize safe work practices in accordance with federal, state, local, and company standards. Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: Desired 5 years related experience, or similar position with experience in the construction field and transportation projects. NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Associates Degree required; Bachelor's Degree a plus. Accepted employment offers will be contingent upon candidate's ability to pass a pre-employment drug and alcohol screen in accordance with Federal Railroad Administration Title 49 CFR Part 219 Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Join Our Team at The Fountainhead Group - Now Hiring Quality Inspectors for 1st & 2nd Shift! Are you detail-oriented and passionate about quality? The Fountainhead Group is seeking dedicated Quality Inspectors to join our growing team on both 1st and 2nd shifts. As part of our Quality Department, you'll play a key role in ensuring the products we proudly manufacture meet the highest standards. In this hands-on role, you'll perform first-piece, incoming, in-process, and final inspections to ensure quality at every stage of production. You'll also help evaluate and document customer returns-all while keeping accurate records that support both company and customer requirements. Be part of a team that values precision, collaboration, and pride in workmanship! Available Shifts & Pay: 1st Shift: 7:00 AM - 3:30 PM, Monday-Friday | $19.00/hour 2nd Shift: 3:00 PM - 11:30 PM, Monday-Friday | $19.00/hour + $0.50 shift differential Want to learn about our open positions at the Fountainhead Group...Click here to learn more! **************************** Responsibilities Conduct First Article Inspection on new products and/or revised products. Inspection throughout the entire manufacturing process including inspection of raw materials, parts, sub-assemblies and finished goods. Ensure appropriate action is taken when non-conforming material is found. Make production run or hold recommendations based on the critically of the defect. Ensure operators are processing or assembling material according to Work Orders and/or BOM. Communicate discrepancies to the attention of the Supervisor, Assistant Q.C. Manager and Q.C. Manager Document performed inspections including non-conforming product found during the inspection process. Create DMR's in Epicor for all non-conforming product. Operate basic measuring devices like micrometers, calipers, height gages, etc. Follow Q.C. procedures, plans and test procedures as outlined Examine, disposition and document customer returns. Maintain good housekeeping and safety in all of the quality control work areas Prompt completion of tasks assigned by Quality Management. All other tasks so assigned. Remote Position No Min Compensation USD $19.00/Hr. Max Compensation USD $19.00/Hr. Qualifications Who You Are: High school diploma or equivalent education required Prior experience in Quality Control and/or Manufacturing preferred You are detail-oriented, capable of reviewing and documenting a high volume of product evaluations You are a skilled written and verbal communicator You possess excellent time management skills and can prioritize various tasks as assigned by the Quality Control Manager to ensure their completion in a timely manner You are capable of operating basic measuring devices (such as micrometers, calipers, height gauges, etc.) You are a team player who likes to work collaboratively In addition to a competitive salary, we are pleased to offer the following benefit package: Medical Dental Paid Vacation Holiday Pay 401k with employer match Tuition Reimbursement Health Reimbursement Account (HRA) Flexible Spending Account (FSA) Employer paid Life Insurance Employee paid Voluntary Life and Short Term Disability Coverage Company Website ************************************* Want to learn more about The Fountainhead Group? Check us out! "We Are The Fountainhead Group" ******************************************* Company Profile The Fountainhead Group is a family-owned and operated company, dedicated to the success and longevity of our business, our employees, and our community. For more than 130 years, FGI has been creating, innovating, and manufacturing liquid sprayer products for the world's top brands and retailers. From the first compressed air sprayer in 1888, we have dedicated ourselves to creating products that make our customer's lives easier, expanding our offering to include the highest quality sprayer technology for both home and professional use. Across four manufacturing and distribution centers in Central New York, we're committed to the betterment of our FGI Family of employees and our local community, supporting more than 350+ local nonprofits through our robust philanthropy and volunteer programs to ensure the success of our community for generations to come. To learn more about our company culture and commitment to the local community, visit the “Community” page of our website and be sure to follow our Facebook account for exciting updates and events! ************************************** ************************************* The Fountainhead Group is an Equal Opportunity Employer (AAE/EEO) and ranked one of the Best Companies to Work for in New York State by the Society for Human Resource Management. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, refugee or disability status. With over 12 languages spoken at FGI, regardless of language ability, education, or training, there is a place for you within the FGI Family!

Line of Business: Other About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform routine testing of ready mix concrete to ensure compliance with specifications and standards Maintain accurate records of test results and communicate findings to production and quality teams Assist in troubleshooting product quality issues and recommend corrective actions Calibrate and maintain testing equipment to ensure reliability and accuracy Support continuous improvement initiatives in product quality and operational efficiency What Are We Looking For Strong understanding of concrete materials and testing procedures Ability to work independently and manage multiple tasks effectively Detail-oriented with strong analytical and problem-solving skills Clear and professional communication skills Commitment to safety and quality standards Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Must meet all legal requirements to work in the U.S. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $23 - $26 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 56 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Purpose: As a sterilization/bio lab tech combine knowledge of microbiology with sterilization processes and gain knowledge of a variety of procedures and test for a multitude of biological organisms. Key Duties and Responsibilities: Provide laboratory support including but not limited to, performance of microbiological tests such as bio and environmental testing. Additionally, preparations of diluents, culture media and reagents as required. Follow good documentation practices reporting and recording data using knowledge of FDA regulations, international standards and guidance documents applicable to medical devices. Uses Inspection Procedures and working knowledge of inspection techniques to inspect parts to blueprints, procedures and specifications in the labs including viscosity, moisture and required environmental room testing such as particulate and environmental monitoring of laboratory and manufacturing areas, including clean rooms and controlled environments. Coordinates test sample shipments and outside testing requests. Writes detailed inspection reports when required in compliance with Standard Operating Procedures on parts, products and processes that pass or fail inspection. Conducts cleaning studies, bioburden, growth promotion, water analysis, and other support testing. Inputs inspection information into computer quality data collection system when required. Assist in development of inspection procedures as directed. Become proficient at performing inspections requiring Levels I & II Metrology and the Vertex measuring machine listed on RI Training Matrix. (if applicable) Maintain 5S requirements and cleanliness according to established schedules and procedures. Perform other related duties as required by management. Work Experience Requirements: Two to five years of relevant work experience required, preferred laboratory/manufacturing experience in a medical device or pharmaceutical environment. Physical Requirements: Must be able to stand for up to eight hours per day. Ability to move about, sits/stands for prolonged periods, bends, stoops, uses hands. Ability to lift up to 35 pounds unassisted. Education Requirements: High School Diploma or equivalent required. A.S.Q. Certifications preferred, i.e.: CMI/CQT. AA degree in a science related field or 2 years laboratory experience with medical devices or pharmaceutical preferred. Knowledge Requirements: Basic knowledge of safe work practices in handling chemicals and biological material. Ability to apply good inspection techniques with minimum supervision. Available for shift work, when necessary. This position is not eligible for employer-based sponsorship. Disclosure as required by applicable law, the hourly pay rate for this position is $19.83 to $25/hour. The hourly pay rate is CONMED's good faith belief at the time of this posting. Benefits: CONMED offers a wide array of benefits to fit your unique needs. Visit our Benefits Page for more information. Competitive compensation Excellent healthcare including medical, dental, vision and prescription coverage Short & long term disability plus life insurance -- cost paid fully by CONMED Retirement Savings Plan (401K) -- CONMED matches your contributions dollar for dollar, with the potential for up to 7% per pay period Employee Stock Purchase Plan -- allows stock purchases at discounted price Tuition assistance for undergraduate and graduate level courses Know someone at CONMED? Have them submit you as a referral before applying for this position to be eligible for our Employee Referral Program incentives! CONMED is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. The Know Your Rights: Workplace Discrimination is Illegal Poster reaffirms this commitment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. If you feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact us at ************ option #5.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. Scope: Responsible for performing visual/mechanical inspection operations on products to plant, customer, and regulatory specifications. Duties: 1. Develop a solid working knowledge of the Quality requirements associated with the inspection of units as defined by customer/industry standards such as IPC/J-STD's, etc. to determine the following: Determine product acceptability using visual/mechanical inspection and drawings/procedures. Document nonconformance issues per plant standards and maintain quality records. Perform inspections using various mechanical and electrical measuring devices and techniques. Provide cross-functional support to engineering groups when manufacturing deviations arise Perform delicate micro adjustments to units (dressing of wires, Removal of fine debris, etc.) Perform First Piece Inspections as needed. Perform source inspections with customer inspectors 2. Provide a Quality presence on the Manufacturing floor by executing the following: Ensure all Customer/Company procedures are being followed as written. Comply with and support company policies and programs regarding safety, security, ISO, OSHA and the Code of Ethics and Business Conduct. Notify and escalate to appropriate parties when quality issues arise. Ensure all work is done to plant/documented standards. 3. Effectively carry-out Quality activities in order to: provide high quality products and compliant data items to customers within scheduled dates ensure compliance to customer and industry requirements develop effective controls/solutions to improve product quality (rework, scrap, warranty escapes) 4. Maintain a willingness to challenge established ways of doing things in a constructive way. Essential Knowledge & Skills: 1. Ability to gain a working knowledge of product requirements (MIL-PRF-38534, MIL-STD-883, drawings, procedures); ability to apply knowledge to microelectronic manufacturing and inspection operations is essential. 2. Ability to read and understand component and assembly drawings and transfer information into visual inspection. 3. Ability to learn and use various visual/measurement equipment (microscope, camera, etc.). 4. Ability to juggle multiple tasks and make quality decisions without negative impact on others. 5. Ability to perform basic computer tasks including but not limited to recording data and labor time, retrieving procedures and drawings from databases, taking and saving product pictures. 6. Ability to work both independently or as part of a team in a dynamic, fast-paced environment. 7. Must be able to work at a stationary workstation for long periods of time while looking through a microscope. 8. Must be detailed orientated. Experience: Required Education: High School Diploma Required Work Experience: 2+ Years Relevant Experience in Manufacturing Environment. Previous mechanical and visual inspection preferred. #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $40,424 - $63,896 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: Responsible for performing visual/mechanical inspection operations on products to plant, customer, and regulatory specifications. Duties: 1. Develop a solid working knowledge of the Quality requirements associated with the inspection of units as defined by customer/industry standards such as IPC/J-Stds, etc. to determine the following: * Determine product acceptability using visual/mechanical inspection and drawings/procedures. * Document nonconformance issues per plant standards and maintain quality records. * Perform inspections using various mechanical and electrical measuring devices and techniques. * Provide cross-functional support to engineering groups when manufacturing deviations arise * Perform delicate micro adjustments to units (dressing of wires, Removal of fine debris, etc.) * Perform First Piece Inspections as needed. * Perform source inspections with customer inspectors 2. Provide a Quality presence on the Manufacturing floor by executing the following: * Ensure all Customer/Company procedures are being followed as written. * Comply with and support company policies and programs regarding safety, security, ISO, OSHA and the Code of Ethics and Business Conduct. * Notify and escalate to appropriate parties when quality issues arise. * Ensure all work is done to plant/documented standards. 3. Effectively carry-out Quality activities in order to: * provide high quality products and compliant data items to customers within scheduled dates * ensure compliance to customer and industry requirements * develop effective controls/solutions to improve product quality (rework, scrap, warranty escapes) 4. Maintain a willingness to challenge established ways of doing things in a constructive way. Essential Knowledge & Skills: 1. Ability to gain a working knowledge of product requirements (MIL-PRF-38534, MIL-STD-883, drawings, procedures); ability to apply knowledge to microelectronic manufacturing and inspection operations is essential. 2. Ability to read and understand component and assembly drawings and transfer information into visual inspection. 3. Ability to learn and use various visual/measurement equipment (microscope, camera, etc). 4. Ability to juggle multiple tasks and make quality decisions without negative impact on others. 5. Ability to perform basic computer tasks including but not limited to recording data and labor time, retrieving procedures and drawings from databases, taking and saving product pictures. 6. Ability to work both independently or as part of a team in a dynamic, fast-paced environment. 7. Must be able to work at a stationary workstation for long periods of time while looking through a microscope. 8. Must be detailed orientated. Experience: Required Education: High School Diploma Required Work Experience: 2+ Years Relevant Experience in Manufacturing Environment. Previous mechanical and visual inspection preferred. #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $40,424 - $63,896 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback onfinal inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.08 - $33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Inspect and document that welds have been produced and implemented as required by all contract documents. Perform work with an outstanding attention to detail; read and understand construction plans, accurately document and report collected information, and communicate effectively with clients. This is a regular full-time position in the Syracuse, NY area. Responsibilities Perform internal and external inspections to determine if weldments and bolts meet the acceptance criteria of a specific code, standard or document Interpret regulations, codes and industry standards to apply to daily tests and inspections Compile and submit inspection reports, daily Perform other construction materials testing and inspection, when necessary Qualifications Must possess Certified Welding Inspector Certification through the American Welding Society (AWS CWI) Knowledge of industry standards including AWS and ASTM required Working knowledge of NDT methodologies, a plus Possess good interpersonal and communication skills Attention to detail and problem-solving skills Must possess and maintain a valid driver's license Compensation: $25 - 34/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Armstrong has an opening for a Quality Inspector 2 on first shift. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, vision, medical, accident, cancer and critical care insurance and safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is ******************* and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our Inspector 2 job is $18.00-$21.00 per hour. Refer to the below: Summary/Objective: Responsible for performing visual and gauge inspection of plastic parts. Job Responsibilities Performs first piece, in process and final inspection to blueprint specifications Verifies parts are compliant with process sheet specifications Visually inspects parts for cosmetic imperfections such as flash, voids, texture, gloss level, etc. and makes minor corrections as necessary Verifies correct number, placement and proper depth of inserts Regardless of location(s) of quality inspection tasks, quality checks and recheck on rework are conducted, documented, and communicated to supervisor and direct manager. If an item/good continually fails quality checks, all documented reflects this communication to supervisor and direct manager is essential as decisions, meetings, and communication from an MRB standpoint occur. Documents actions by completing all required paperwork and quality logs. Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping. Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct. Proactively supports the ISO process approach to quality management and the Syteline MIS system. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested). Performs other tasks as directed. Educational, Experience Based, and Skill Qualifications High school diploma or equivalent with good math skills and ability to read blueprints. 6 months experience in a quality inspection capacity preferred. Foundry, machining company, or injection molding background preferred. Strong attention to detail. Basic math, & Geometry/Trigonometry Flexibility based on plant product schedules A minimum of 6 months previous experience using a computer and measuring instruments preferred Testing on inspection and measurement is a prerequisite for this position. CMM machine experience is a plus. Strong attention to detail. Conceptual Skills and good hand eye coordination to inspect parts. Physical Requirements Ability to walk, remain on feet for extended time periods, reach, stoop. Kneel and lift up to and including 35 pounds as needed. Visual abilities and manual dexterity. Requires close, distance, color, and peripheral vision, depth perception and the ability to continually adjust focus. AAP/EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at ************ or by email to ******************. * unless an employee reasonable accommodation would result in undue hardship. Management reserves the right to revise (s) at any time. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of this job. Duties, responsibilities and activities may change at any time with or without notice. Job Posted by ApplicantPro

Direct Hire Direct Hire Schedule & Pay Hours: Monday-Friday, 11pm - 7:30am $20.00 Medical/Dental/PTO/401K- offered The Quality Control Inspect is a direct hire opportunity. The Quality Control Inspector is responsible for conducting inspections throughout the production process to ensure all materials, components, and finished products meet quality standards. The ideal candidate is experienced with inspection tools, adheres to defined procedures, and communicates effectively with both production and quality teams. Key Responsibilities: Conduct First Article Inspections on new and/or revised products. Perform in-process inspections across the full manufacturing cycle, including raw materials, parts, sub-assemblies, and finished goods. Identify non-conforming materials and determine appropriate action (e.g., production run, hold, or rejection) based on the severity of the defect. Verify that operators follow Work Orders and Bills of Materials (BOM); report discrepancies to Supervisors and Quality Management. Accurately document inspection results, including identification of any non-conforming products. Generate DMRs (Discrepant Material Reports) in the EPICOR ERP system for all defective or non-compliant products. Utilize measuring tools such as micrometers, calipers, height gauges, and other standard inspection equipment. Follow all Quality Control procedures and test plans as defined. Inspect, evaluate, and document customer returns. Maintain clean, organized, and safe work areas in accordance with company policies. Complete assignments and tasks as directed by Quality Management. Perform additional duties as assigned. Qualifications: High school diploma or equivalent required. Prior experience in Quality Control and/or Manufacturing is preferred. Strong attention to detail with the ability to inspect and document high volumes of product accurately. Solid written and verbal communication skills. Excellent time management and task prioritization abilities. Ability to operate basic inspection and measuring devices effectively. Comfortable working collaboratively within a team-oriented environment. Willingness and ability to train on First Shift before moving to Second Shift. Preferred Experience: Familiarity with Epicor or similar ERP systems. Understanding of DMR processes and quality documentation practices. Knowledge of quality standards (e.g., ISO, ANSI) is a plus.

Job Description With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: Competitive Pay Competitive Health Insurance Paid training and certification with cash bonuses for successful completion Advancement career and opportunity planning Company vehicle for travel to project sites Paid Vacations/Sick/Personal/Holidays Safety training and equipment provided 401(k) Retirement Savings Plan with company match Certified Welding Inspector (CWI) Qualifications: Strong written and verbal communication skills Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations. Proficient in Microsoft Office Ability to work with AWS & AISC codes One or more of the following certifications is required: ICC Structural Steel and Bolting Special Inspector, ICC Structural Welding Special Inspector, AWS CWI, AWS CAWI, SSPC, AMPP or ASNT NDT Certified Welding Inspector (CWI) Responsibilities: Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State. Perform special inspections in accordance with the applicable building code requirements. Review project plans and specifications. Review and perform welding procedure and performance qualification testing. Routinely and effectively communicate with colleagues, contractors, and clients. ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders.

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback onfinal inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.08 - $33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants Read construction documents and specifications and correctly interpret test results Record and report test results in a clear, concise manner Complete each testing assignment accurately and in accordance with the appropriate standards Turn in field data records and completed reports for each project daily Communicate regularly with direct supervisor to provide updates on project details Complete continuing education and preparation for additional certifications Qualifications High School Diploma required Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Familiarity with construction materials, procedures and documents a plus Must possess and maintain a valid driver's license Must possess reliable transportation and current/required automotive insurance coverage Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Line of Business: AsphaltJob Description About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform quality control testing to ensure building materials meet required standards and specifications. Analyze test results and provide feedback to support production processes. Accurately document and report testing outcomes to maintain compliance. Collaborate with the team to enhance safety and quality protocols. Identify areas for improvement and support process optimization initiatives. What Are We Looking For Knowledge of quality control processes and testing procedures. Strong analytical skills with excellent attention to detail. Ability to work effectively both independently and as part of a team. Excellent communication skills to share insights and recommendations. Dedication to maintaining high safety and quality standards. Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $23.00 to $27.00 per hour. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits. Health Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA). AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance. Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays. Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job Description CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants Read construction documents and specifications and correctly interpret test results Record and report test results in a clear, concise manner Complete each testing assignment accurately and in accordance with the appropriate standards Turn in field data records and completed reports for each project daily Communicate regularly with direct supervisor to provide updates on project details Complete continuing education and preparation for additional certifications Qualifications High School Diploma required Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Familiarity with construction materials, procedures and documents a plus Must possess and maintain a valid driver's license Must possess reliable transportation and current/required automotive insurance coverage Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 5ItnX6dJAs

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform routine testing of ready mix concrete to ensure compliance with specifications and standards Maintain accurate records of test results and communicate findings to production and quality teams Assist in troubleshooting product quality issues and recommend corrective actions Calibrate and maintain testing equipment to ensure reliability and accuracy Support continuous improvement initiatives in product quality and operational efficiency What Are We Looking For Strong understanding of concrete materials and testing procedures Ability to work independently and manage multiple tasks effectively Detail-oriented with strong analytical and problem-solving skills Clear and professional communication skills Commitment to safety and quality standards Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Must meet all legal requirements to work in the U.S. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $23 - $27 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 56 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job DescriptionStaffworks is recruiting for a Quality Control Inspector for a growing lumber company in Sherburne, NY! Hours: 1st shift: 6:00a.m. - 3:30p.m. 2nd shift: 3:45p.m. - 2:15a.m. The Quality Control Inspector will be responsible for inspecting the pallets of wood to ensure they meet all the specifications on the custom order forms. They will be inspecting the wood to check for quality or "grade" and ensuring cuts are being made to the correct specs. Qualified candidates must be:- Very detail-oriented- Have mathematical skills & be able to measure correctly- Previous QC experience is required Requirements: Candidates must pass a pre-employment drug test and background check