Quality control inspector jobs in Vineland, NJ

SP Industries Inc. is expanding our team in Vineland, NJ and have immediate openings for a Quality Inspector. In this role, the right candidate will perform assigned quality assurance tasks including inspection of incoming, in process and final auditing. They will assure that project product and process requirements comply with the ISO9000 quality system standards This position reports directly to the Quality Manager. Hours are Monday- Thursday on 1st Shift - 4/10s schedule. Essential Duties and Responsibilities Visually inspects glassware, where defects may be difficult to see Assists the Quality Manager with data gathering part inspections, continuous improvement projects, corrective action follow ups and ISO9000 maintenance duties as assigned Performs receiving inspections, in process inspection and final inspection Must keep track of results and inform Quality Manager of findings Assures that inspection records test quality plans are complete and accurate Performs daily scheduled system quality process audits and specified 100 inspection of in process and final products Uses diverse measuring devices and equipment like calipers, micrometers, pin and fixture gages, among others to evaluate glassware quality compliance Interpreting mechanical drawings and specifications that are job related Education and/or Experience High School Diploma or GED Must possess adequate visual acuity with or without corrective lenses Prior experience working in a team oriented environment 2-5 years of glass experience preferred Appropriate hand and eye coordination HSE All employees have the responsibility to work in a safe manner and report any health, safety or environmental concern to their manager or supervisor in a timely manner. Employee responsibilities for Health, Safety and Environment include: Work in compliance with divisional health, safety and environmental procedures Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods Report any unsafe conditions or unsafe acts Report defect in any equipment or protective device Ensure that the required protective equipment is used for the assigned tasks Attend all required health, safety and environmental training Report any accidents/incidents to supervisor Assist in investigating accidents/incidents Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct Why SP Industries Inc.? The three parallelograms in our logo reflect our core company values: People, Process, and Performance. As part of ATS, Scientific Products leverages the ATS Business Model (ABM) to train, develop, engage, empower, and energize our people to make impactful changes in the organization. Our relentless focus on people is what continues to set us apart as a great place to build a career. • We provide a wide range of innovative and high-quality scientific products that improve people's lives • We offer a robust health and welfare benefits package that includes Life, Health, Dental, Vision • We offer 401(K) including company match, Paid Time Off annually + Paid Holidays • You will enjoy career Advancement Opportunities and Tuition Assistance to help you achieve your goals and continue your career growth ATS is a $2.2B publicly-traded global enterprise with a proud 40-year history of helping advance the future with automation solutions. Scientific Products sits within the ATS Life Sciences Group and is a leading global provider of state-of-the-art fill-finish drug manufacturing solutions, research, pilot and production lyophilizers, laboratory equipment and supplies, and specialty glassware. Scientific Products supports research and production across diverse end-user markets including pharmaceuticals, life science, ophthalmic, environmental testing and monitoring, food and beverage and more. Scientific Products has a long and successful track record of quality and science innovation, and is headquartered in Warminster, Pennsylvania, with production facilities in the USA and Europe. Scientific Products offers a world-wide sales and service network including product training and technical assistance. For more information visit *************************** EEO and Affirmative Action Statement: SP is an Equal Opportunity Employer, dedicated to a policy of non-discrimination in employment on any basis and takes affirmative action to ensure equal employment opportunities. It is our policy to provide our employees and applicants with equal employment opportunities in accordance with applicable laws and not to discriminate on the basis of race, color, religion, ancestry, national origin, age, marital status, sex, gender identification, sexual orientation, genetic information, political belief, pregnancy, citizenship, handicap or disability, status as a veteran or member of the U.S. military, or any other characteristic protected by applicable federal, state, or local laws. SP's Affirmative Action Plan is available through the HR Department and may be accessed during normal business hours. Pay Transparency Nondiscrimination Provision: SP will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.

This position is responsible for completing, but not limited to, lot control (when required) and quality inspections, paperwork and maintaining a filing system for this paperwork. The position may also perform incoming inspection, product and process audits on material. The QC Inspector will assist with calibration plus final inspection and acceptance for in plant processes. This inspector may also be requested at times to provide coverage in other locations/divisions than currently assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES: Record lot traceability information and maintain lot traceability database. Conduct inspections - incoming inspections, PDS inspections Product audits and final product quality inspections. RGA support Ensure/Assist with calibration of equipment Participates in the Internal Audit Program Operates all equipment in a safe and professional manner, while completing tasks on a timely basis. Understand the DWK Quality Policy and relevant Quality Objectives. Recognize his/her contribution to the effectiveness of the OPS including the benefits of improved performance. Observe all safety precautions, rules and regulations and maintains work area in a clean and safe manner. Works within the guidelines of ISO and EHS. Other duties as assigned. Education and/or Experience High School diploma or GED equivalent preferred One (1) year experience in a manufacturing environment preferred One (1) year of prior quality experience preferred Computer literate. SAP knowledge a plus. Work Environment / Conditions / Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, stand, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, bend, talk and hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Work will take place in an office and warehouse environment. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

About the Role: TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. About TAI: TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. Here's a glimpse into your day to day: * Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. * Ensure project deliverables meet TAI and client expectations * Manage all phases of a project - setup, execution, and closeout * Develop and maintain project schedules and budgets. * Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. * Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. * Perform overall project quality control. * Visit field to scope out projects. * Support proposal development by assisting with scope development, cost estimating and execution plan coordination. * Experience and knowledge of Magnetic Flux Leakage Technology (MFL). * Experience and knowledge of floating roofs and seal inspections. * Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Conduct daily safety risk assessments on routine and non-routine job tasks. * Scheduling activities related to inspection. * Prepare isometric drawings and field sketches of piping for pipe inspections * Review and interpret P&ID's * Writes detailed inspection reports and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. You'll be a perfect fit if you have: * High School Diploma, some college coursework preferred. * API 653 Certification. * Have a minimum of 10 years' experience working as an API Inspector within related industry * At least 5 years' experience managing large Above Ground Tank Inspection projects. * Prior experience supervising a project team * Self-motivated individual with the ability to work independently and oversee large projects. * Experienced with using Magnetic Flux Leakage Technology (MFL) * Demonstrated ability to perform complete inspection reports for equipment or piping. * Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. * Documentation: Clarity, comprehensiveness, and professional presentation of reports. * High reach operation ability. * Demonstrated leadership, interpersonal and communication skills. * Travel: Will travel up to 50% out of town. Physical Requirements: * Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. * Must be able to remain in a stationary position as necessary to complete assigned tasks. * The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. * Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. * Must be able to ascend and descend a large quantity of stairways at any given time. * Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. * Occasionally lift and move equipment in excess of 100lbs in a safe manner. * Must be able to work in outdoor weather conditions as needed. Compensation and Benefits: * Pay: $55-65/hour (based upon experience) * Annual Profit Sharing Bonus (variable) * PTO and Paid Holidays * Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! * 401(k)with employer match Other Offerings: * The opportunity to make a real impact on a variety of industry-leading projects. * The ability to balance your work and family activities. * Flexible work schedule * Work in a dynamic and collaborative environment that values creativity and innovation. * A chance to learn and grow alongside some of the brightest minds in engineering. * Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at ***********************

The Quality Control Technician ensures that products meet quality standards by performing quality control on raw materials, semi-finished, and finished goods. This role involves verifying food safety and quality SOPs, conducting root cause analysis, and implementing corrective and preventive actions. Shift Schedule: 2nd Shift, 2-10 PM Monday-Friday Primary Responsibilities: * Ensure raw materials are released and available for Operations in coordination with supply chain team * Monitor receipt of incoming raw materials & manufacturing products to assure adherence to quality policies and procedures on a daily basis * Inspection of bulk deliveries (liquid sugar, corn syrup, flour, sugar, etc.) * Analytical testing where applicable * Record results in designated files for all testing performed * Ensure finished goods are released and available for customer shipments in coordination with supply chain team * Perform analytical and bake testing as indicated for each finished product * Record test results, finished product spreadsheet or other database as required for analytical, bake testing * Release product as required; apply hold tags to permanent holds, maintain hold file and update SAP to reflect status of all held product at any given time * Keep turnaround time according to the specifications * Daily production/ warehouse walk-through; plant and line checks; inline quality control checks verification * Support QA in cleaning verifications; lab coordination * Additional projects and tasks may be assigned to support Operations and the Quality Team as necessary * Close collaboration with production and warehouse on quality investigation on the production floor Requirement: * At least 2+ years or related work experience in similar setting * Bachelor's degree required in a relevant field (e.g., Quality Control Technology, Microbiology, Food Science) is preferred; may consider other education with related experience * Proficient in MS Office applications; Excel, Word, PowerPoint; SAP required * Adherence to Puratos dress code and PPE policies * Excellent written & verbal skills * Completion of SQF, GMP, and SOP training strongly preferred * Physical Demands: Occasional sitting, climbing/balancing, stooping/twisting, kneeling, squatting, crawling, push/pull, reaching, and gripping; frequent standing, walking; occasionally lift up to 50 lbs; frequently lift/carry up to 25 lbs * Environmental Conditions: occasional working at heights, exposure to hazards, working with machinery, frequently working with uneven ground, excessive noise, extreme temperatures, exposure to dust/fumes The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account If you are a solution oriented and analytical thinker with a passion for leading and inspiring people, we invite you to experience the magic of being yourself and join us for "a career for good." #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

**About the Role:** TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. **About TAI:** TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. + Ensure project deliverables meet TAI and client expectations + Manage all phases of a project - setup, execution, and closeout + Develop and maintain project schedules and budgets. + Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. + Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. + Perform overall project quality control. + Visit field to scope out projects. + Support proposal development by assisting with scope development, cost estimating and execution plan coordination. + Experience and knowledge of Magnetic Flux Leakage Technology (MFL). + Experience and knowledge of floating roofs and seal inspections. + Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. + Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. + Conduct daily safety risk assessments on routine and non-routine job tasks. + Scheduling activities related to inspection. + Prepare isometric drawings and field sketches of piping for pipe inspections + Review and interpret P&ID's + Writes detailed inspection reports and maintains documentation of inspection activities. + Identifies circumstances that necessitate the use of proper safety procedures and equipment. + Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. **You'll be a perfect fit if you have:** + High School Diploma, some college coursework preferred. + API 653 Certification. + Have a minimum of 10 years' experience working as an API Inspector within related industry + At least 5 years' experience managing large Above Ground Tank Inspection projects. + Prior experience supervising a project team + Self-motivated individual with the ability to work independently and oversee large projects. + Experienced with using Magnetic Flux Leakage Technology (MFL) + Demonstrated ability to perform complete inspection reports for equipment or piping. + Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. + Documentation: Clarity, comprehensiveness, and professional presentation of reports. + High reach operation ability. + Demonstrated leadership, interpersonal and communication skills. + Travel: Will travel up to 50% out of town. _Physical Requirements:_ + Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. + Must be able to remain in a stationary position as necessary to complete assigned tasks. + The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. + Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. + Must be able to ascend and descend a large quantity of stairways at any given time. + Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. + Occasionally lift and move equipment in excess of 100lbs in a safe manner. + Must be able to work in outdoor weather conditions as needed. **Compensation and Benefits:** + Pay: $55-65/hour (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements: Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful.

$19.87-$27.99 Per Hour Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Position Detail: LAB TECH: * Perform required tests in SPC data system at the standard frequency including CO2, brix, TA, air, codes, dew point, taste, odor, appearance, contents, sodium, etc. * Perform control drinks test as needed. * Perform can seam check at required frequency. * Perform weekly full round net content of filler. * Perform product changeovers at filler. * Valve troubleshooting and rebuilding. * Assist, train and mentor other lab techs with operational problems such as syrup issues, lab testing, CIP, micros, filler changeovers to improve effectiveness. * Assist as needed in production report filing, updating formulas, vendor information or any other lab related documents. * Verify and oversee water room testing and PM work as needed to insure compliance. * Verify that all production schedules are current and communicated to all depts. * Be SQF ready at all times by completing tours and following up on any issues. * Assist QA Manager and or Supervisor as needed. * Maintain communication with production regarding schedules and changes, syrup batch issues, etc. * Correct batch as needed according to the control drink results. * Ensure syrup tanks and High Shear mixer are CIP and have been verified clean by performing Taste, Odor, and Appearance testing. * Ensure every tank has been 7-stepped CIP at least once per week and before batching sensitive products. Maintain use of Chart Recorder. * Ensure that empty bags and containers are properly discarded of. * Follow all GMP guidelines at all times. * Keep work area clean and organized, keeping overhead door closed when not bringing in materials. * Ensure caps, gaskets, clamps, etc are kept clean and dry. * Ensure tanks are capped off and doors are closed after CIP. * Back up for this position is another trained lab tech. * Must have an understanding of SQF, responsible for Food, Safety/Food Quality and to notify a person with the authority to take action for any Food Safety or Food Quality issue. * BATCHER TECHNICIAN: * Responsible for accurately following batch instruction sheets, dispensing and weighing dry ingredient weight and lot numbers. * Batch syrup using correct formulation and mixing instructions. * Physically lift ingredient bags up to 50 lbs and manually open 1 to 5 gallon pails and jugs. * Must have computer skills for requesting bulk ingredients through HMI (Human Machine Interface). * Operate cleaning in place (CIP) system and use transfer cleaning chemicals. * Review daily production schedules to coordinate what product to run. * Maintain the cleanliness of the batching and sugar rooms. * Ensure all Safety Standard (Company or Regulatory) are met at all times. * Ensure all Company Good Manufacturing Standards are met at all times. Working Conditions: Will work regularly around moving mechanical parts and equipment. Plant is very clean & is a safe environment. Regularly exposed to wet floors, humid conditions, cold conditions, and caustic chemicals. Noise level requires hearing protection. Will occasionally lift up to 75 pounds during shift. Will regularly be required to walk stand, use of hands and fingers, handle objects, tools, controls, reach with hands and arms, talk and hear. Employee will occasionally be required to sit, climb and or balance, stoop, kneel, crouch, crawl and smell., taste Vision requirements are close, distance, color, peripheral, depth and ability to adjust focus. Position Requirements: * Soft drinks experience preferred. * High school standard of education. * BS/BA in a scientific field, preferably Microbiology, with at least 1 college level course in Microbiology. * Understanding of GMP and Lab Safety, Standard Methods and processes. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: * Medical/dental/vision insurance * Life insurance * 401(k) savings plan with company match * Paid holidays and vacation * Well-being benefits * Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law. Criteria Behaviors Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Team Player: Works well as a member of a group Dedicated: Devoted to a task or purpose with loyalty or integrity

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

Philadelphia - based privately -owned manufacturer is seeking an individual for an entry -level production staff position that will involve a hands -on approach to quality control, inventory control, process improvement and related process tasks and projects. Duties include but are not limited to:  Manage Raw Materials : purchase, inspection, inventory  Quality Inspection : root cause analysis of off spec product, mold parts for wear / maintenance, monitor / maintain QC charts in the software system, finished goods  Environmental and Safety Reporting : coordinating with consultants to provide reporting data and organize mandatory training  ISO 9001:2015 : coordinate with consultant to maintain program through audits, corrective action reports and calibration of tools and equipment  Customer Complaints and Returns : check QC records, inspect returned product, investigate possible causes and provide feedback to production management / sales /customers  Documentation of new production processes  Microsoft Dynamics 365 : QC data inputs and SPC chart development, process time studies, product costing data accuracy  Familiarity with AutoCAD or similar and machine controls a plus RequirementsAssociate degree or higher OR equivalent experience in a manufacturing environment required. Full -time position, on -site, 40 hours per week Monday to Friday. Strong communication skills with hourly employees, management, sales and customers required. BenefitsBenefits include: medical, dental, vision and life insurance, 401K plan with generous company match, quarterly profit share, paid vacation and paid holidays.

Job Summary We are seeking a detail-oriented and highly responsible Quality Control Site Safety Health Officer (QC/SSHO) to support a government services contract. This individual will be responsible for overseeing quality control and site safety practices in accordance with Federal and State regulations. A key aspect of the role includes documenting and uploading field observations (photos, statements, reports) into the computerized database system such as NCMMS/Maximo or similar. This is a mission-critical role that ensures safety, compliance, and accurate reporting on all aspects of the contract work carried out. Key Responsibilities: Serve as the primary Quality Control and Safety point of contact on-site. Ensure compliance with all federal, state, and local safety and environmental regulations, as well as project-specific guidelines. Conduct daily Safety Inspections and QC audits on completed and ongoing contract work to identify and mitigate potential hazards and quality issues. Document all findings with photographs and written statements to be entered into NCMMS/Maximo or similar system in a timely and accurate manner as part of the role. Coordinate and lead preparatory, initial, and follow-up QC meetings in accordance with the approved Quality Control Plan Responsible for leading safety meetings, toolbox talks, and driving safe work performance at all times Develop and submit activity hazard analyses (AHAs) and ensure their implementation in the field. Enforce all job site safety protocols and OSHA standards. Interface with government representatives, subcontractors, and field staff to maintain compliance with contract specifications.Maintain detailed site logs, inspection reports, and records in alignment with contract and computerized maintenance system requirements. Investigate incidents or near-misses, gather statements, and contribute to root cause analysis and corrective actions. Provide leadership with overviews of all incidents no matter the severity for compliance, follow up, and safety reporting purposes. Qualifications: Prior experience working as a QC Manager or SSHO on federal or DoD projects (NAVFAC, USACE, GSA) preferred experience). Familiarity with mechanical systems and related inspection procedures. Familiarity with custodial procedures and services (if applicable). Familiarity with grounds maintenance procedures and services (if applicable). Working knowledge of NCMMS/Maximo or similar asset management platforms OSHA 30-Hour Construction Safety Certification (required). EM 385-1-1 certification (required by contract). USACE Construction Quality Management (CQM) certification or equivalent certification. Strong verbal and written communication skills. Proficient in photo documentation and digital reporting processes. Ability to work independently, manage time effectively, and adhere to strict government protocols. U.S. Citizenship is required due to access requirements for military installations. Additional Requirements: Must be able to pass background checks and security clearance as required for access to applicable contract. Must adhere to all PPE guidelines. This includes wearing appropriate PPE at all times and following all site-specific safety procedures/plans. Ability to climb ladders, navigate construction sites, and stand for extended periods. Ability to bend, stoop, pick up items up to 50lbs. Must have a valid driver's license, Read ID, and/or Passport Primary Place of Performance Philadelphia PA, Shipyard and Mechanicsburg PA. Compensation and Benefits Pay Range: $80,000 - $85,000 Medical, Dental, Vision, Supplementary insurances, 401k match EQUAL OPPORTUNITY EMPLOYER…..FORTIS is an Equal Opportunity Employer. Prospective employees will receive consideration without discrimination because of race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, sexual orientation, or any other legally protected status. We are committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. FORTIS is an E-Verify employer Applicant must receive favorable background and drug screen results and meet eligibility requirements for access to government computer systems and or facilities if necessary. Drug screens follow Federal guidelines.

Job Details PHILADELPHIA, PADescription Our company has been providing local restaurants with the finest ingredients available since 1915. Located in Philadelphia, we are a family-owned food wholesale distribution company. In the past several years we have experienced tremendous growth, and we are currently looking to add to our team. We recognize that a quality team is vital to support our quality products and services. With this in mind, we are continually striving to find the most qualified and committed candidates to join our team--those with a talent and passion for what they do! Position Summary: This position serves as the primary daily authority on product quality, food safety, and warehouse compliance. It fills a crucial operational gap, with the ability to immediately stop product flow, document and correct violations, and maintain a full compliance trail. Responsibilities: Conduct structured walkthroughs three times per shift (start and mid-shift) Tag, document, and photo-log any violations or non-conforming product (e.g., poor wrapping, allergen exposure, FIFO issues) Initiate real-time corrective actions with Receiving and Dispatch leads Own and maintain compliance logs, issue closures, and audit documentation Provide face-to-face coaching to warehouse management Escalate unresolved or systemic issues directly to leadership Performance Metrics/Key Performance Indicators: Eliminate carryover of QC issues from shift-to-shift 100% audit log and photo documentation compliance Reduced outbound customer complaints tied to product condition Fully maintained and audit-ready documentation trail Benefits: 401(k) 401(k) matching Dental Insurance Disability insurance Health insurance Life insurance Paid time off Vision insurance Schedule: Saturdays required, Sunday and one rotating weekday off Semi-flexible AM start with full-shift floor coverage EEO M/F/D/V Our company recruits, hires and promotes individuals without regard to race, creed, color, religion, age, gender, national origin or ancestry, marital status, sexual orientation, veteran status, or physical or mental disability unrelated to an individual's ability to perform the job, or any other status protected by law, all in accordance with applicable Federal, State or Local Laws. #IND123 Qualifications 2+ years of QC or foodservice warehouse experience Strong knowledge of HACCP, cold chain logistics, and SQF requirements Familiarity with inventory management systems (e.g., WMS, RF devices, handhelds) Comfortable working in freezer and refrigerated environments Must be available every Saturday

This role is responsible for acting as a testing resource for the lab, supporting the current technicians and provide testing services used to facilitate production and certification of products. This role will also assist in maintaining documentation of test results, procedures and calibration of tools and equipment. Essential Functions: * Provides accurate and timely test results and assist production with in-process testing. * Maintains quality records and procedures. * Performs standard testing in a lab environment when needed * Certifies physical properties to customers and generates certificate of compliance. * Maintains records of calibration and repair and perform calibrations on equipment/tools. * Maintains labs inventory of test consumables. * Reviews compliance of materials to material specifications. * Other duties as assigned. Qualifications: * High School Diploma or equivalent. May consider equivalent experience in lieu of education. * 1+ Year experience in manufacturing environment. * Experience with data analysis and database computer programs. * Experience with quality and other laboratory testing tools.

Full-time Description Since 1904, Nelson Miller Group (NMG) has been a leading global provider of custom solutions, partnering with organizations across industrial, IoT, lighting, medical, telecommunications, consumer, and aerospace and defense sectors. We bring complex products to life by solving intricate challenges in engineering design, manufacturing, and supply chain management. Our expertise spans Human-Machine Interface (HMI) solutions, value-added distribution, plastics, membrane switches, overlays, touch panels, electronics, metals, and cables. Our century-long legacy is built on a deep commitment to innovation, operational excellence, and unwavering customer satisfaction. These principles drive everything we do as we continue to grow and expand our global market presence. General Description Inspects molded and assembled product or parts for work quality, dimensional accuracy, conformance to drawings, internal specifications, and customer-supplied specifications using precision measuring and testing instruments and equipment. This individual is required to handle the day-to-day shift inspections and all measurement tools. Duties and Responsibilities Reads inspection logs and quality plans to determine mature and sequence inspection. Perform basic functions such as locating part specific programming, following fixturing outlines, and taking basic digital readout measures Reviews blueprints and product quality plans to locate critical dimensions and cosmetic criteria used during inspection. Inspects molded parts and assemblies during all phases of fabrication and assembly to ensure adherence to cosmetic and dimensional specifications. Measures parts and assemblies for dimensional accuracy using precision measuring instruments, templates, jigs, and fixtures. Accepts or rejects parts and assemblies, prepares documentation to record inspection results, and segregates unacceptable products. Confers with production and other personnel to coordinate the inspection process and to discuss inspection results. Inspects packaging of product to determine compliance with internal packaging instructions Inspects purchased parts, assemblies, accessories, and materials for conformance to specifications using precision measuring instruments and devices. Examines items for defects in materials, workmanship, and damage occurring in transit. Accepts or rejects purchased product, prepares documentation to record inspection results, and segregates unacceptable products. May prepare inspection procedure outlines for reference use in subsequent inspections using data obtained from blueprints, customer specifications, and catalogs. Assists machine operators in determining product quality conformance. Trains new and existing machine operators on operator tasks and product quality specific to each production item. Maintains a clean and orderly work area. Provides information and suggestions for improvement of product, processes, and the quality management system. May occasionally perform the duties of machine operator as directed by supervisor. All other duties as assigned. Qualification Requirements General: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and or ability required. Experience with vision systems (Keyence, OGP, Mitutoyo, and similar) required. Experience with hand tools (calipers, micrometers, height gages, and similar) required. Understanding of basic blueprint reading required. Education: High school diploma or general education degree (GED); and a minimum of one year manufacturing experience and/or training; or equivalent combination of education and experience. Experience with injection molding or plastics required. ASQ certification is a plus. Language Skills: Ability to write routine reports and correspondence. Ability to speak effectively to all employees of the organization. Ability to comprehend and comply with written and verbal procedures, instructions, and assignments. Ability to deal with situations involving several variables in standard manufacturing conditions. Ability to actively participate in group problem solving activities. Mathematical Skills: Ability to add subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to use ratios and percents. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities: Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand, walk, and use hands to finger, handle, or feel objects, tools, or controls. The employee must frequently lift and or move up to 10 lbs. and occasionally lift and or move up to 25lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is exposed to humid conditions. The noise level in the work environment is usually moderate. Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Candidates being considered for hire must pass a pre-employment background check. Compensation and Benefits: Pay Range: $17.50/hr - $24.00/hr (Pay to be determined by the experience, knowledge, skills, and abilities of the candidate, and alignment with market data) Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. Nelson Miller Group also provides a 401(k) Retirement Savings Plan option with a safe harbor non-elective company contribution. Nelson Miller Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. Salary Description $17.50/hr - $24.00/hr

Job Details East Coast Distribution Center - WESTAMPTON, NJ Full Time $20.00 - $22.00 Hourly Mid ShiftDescription Join our innovative team at TLCH Foods where we are committed to help more food brands redefine the dining experience for their customers by blending creativity, practicality, and smart solutions. Our team of culinary experts includes award-winning chefs, presidents of iconic food brands, and over 70 years of combined business, operations, and technology experience-not to mention, an unwavering passion for food. We are currently seeking highly motivated individuals to fill Quality Control Inspector role at our food manufacturing facility in Westampton, NJ. The primary responsibilities of this role is to monitors and inspect established food safety and quality assurance functions in support of our commitment to our customers and our Mission Statement. What will you be doing: Responsible for inspections, process audits, product testing, analyzing measurements and overseeing production processes to ensure high quality products. Responsible for maintaining quality control standards by properly investigating, correcting and communicating any in process or finished product quality issues immediately. Responsible for completing and reviewing in process and finished product documentation to ensure accuracy. Ability to perform basic food safety practices in the production center with a high degree of attention to detail and internal customer service. Ability to consistently execute tasks according to SOP (Standard Operating Procedures) SSOP (Sanitation Standard Operating Procedure) and GMP (Good Manufacturing Practices) for the production center as trained. Ability to provide support in all areas related to the lab and testing of products. Ability to demonstrate accurate and safe use of basic warehouse equipment including but not limited to pH meter and luminometer. Qualifications Who you are and why you're right for us: At least 6 months experience in warehouse setting is preferred. Ability to read and follow written and/or verbal instructions in English. Attention to detail, accuracy, thoroughness, and flexibility required Basic computer skills required (Microsoft Word, Internet search, Data Entry, Email) Ability to work in a fast-paced environment, a variety of shifts, weekends, and overtime as needed. Ability to work independently and or in a group setting, with minimal supervision. Ability to work in a refrigerated environment (-9º-42º Fahrenheit) for 8 or more hours and in some instances, in a dark environment Why Join Us: Medical, Dental, Vision and Life Insurance HSA and FSA account options Employee assistance program Employee discount 401(K) with a match Paid Holiday and additional 2 Floating Holidays Paid time off (PTO) Access to our weekly internal Farmer's Market, where you can take home free quality produce and pantry items.

Full-time Description Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour