Quality control inspector jobs in White Plains, NY - 101 jobs

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

The Quality Inspector will complete visual and mechanical inspection of housings, chassis, and final assemblies. They will review paperwork, complete computer entry, read and interpret drawings and documents. They will interface with production line and visiting customers. They will also work in clean room environments. Required Skills Good written and verbal communication skills. Problem solving and analytical skills a plus. Keen attention to detail. Basic computer and math skills to measure specifications. Ability to use measuring devices such as gauges, meters, calipers and computers. Experience with workmanship specifications JSTD-001 and IPC-610 certifications preferred MIL-STD 38534, MIL-STD 38535 preferred EOE/Disability/Veteran This position is onsite We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

AMC Networks is home to many of the greatest stories and characters in TV and film and the premier destination for passionate and engaged fan communities around the world. We create and curate celebrated series and films across distinct brands and make them available to audiences everywhere. Our portfolio includes targeted streaming services AMC+, Acorn TV, Shudder, Sundance Now, ALLBLK and HIDIVE; cable networks AMC, BBC AMERICA, Independent Film Company, Sundance TV and We TV; and film distribution labels Independent Film Company and RLJE Films. The company also operates AMC Studios, our in-house studio, production, and distribution operation behind acclaimed and fan-favorite originals including The Walking Dead Universe and the Anne Rice Immortal Universe, and AMC Networks International, our international programming business. We are currently seeking a Quality Control Technician to join our Media Operations & Engineering team based in our Bethpage, NY office. JOB RESPONSIBILITIES Responsible for the quality control evaluation of AMCN Broadcasting & Technologies client Network's program materials - both digitally delivered files and physical tapes. Utilize and understand industry and departmental quality control procedures, guidelines, and department document database for proper and complete media evaluation. Provide full and accurate metadata entries and reports of quality control assignments, giving great attention to detail and accuracy. Maintain effective and productive communication channels with various AMCN B&T departments and colleagues, as they relate to scheduled work assignments and troubleshooting. Understand and properly use all technical equipment related to work completion. Report and document equipment issues and anomalies. Qualifications (Required & Preferred) Bachelor's degree in relevant field major (i.e. Communications, TV Production, etc.) preferred. At minimum, two years of relevant work experience in a broadcast television environment. Excellent research, evaluation, and troubleshooting skills. Outstanding communication skills, both verbal and written. Comprehensive knowledge of time code, reference, frame rates, resolution, aspect ratios, audio formats (PCM) and types (surround/stereo), digital file formats. Advanced knowledge of NTSC, PAL and HD video/audio broadcast standards and specifications. General understanding of digital file codecs/wrappers and transcoding workflows. Willingness to maintain flexible work schedule including nights, weekends, and holidays at management's discretion. Strong analytic skills & critical thinking Ability to absorb and retain information quickly Excellent interpersonal skills. High level of attention to detail. Ability to interact and collaborate with all levels of management, co-workers and other departments. Ability to quickly adapt to new technologies and workflows in a rapidly evolving environment. Ideal candidate will be well versed in file based workflows. Experience with the Evertz Mediator platform a plus. Exposure to delivering digital files and elements to Electronic Sell Through platforms a plus. Experience delivering media to VOD services a plus. The base compensation for this position is $52,000 to $55,000 commensurate with experience. AMC Networks additionally offers a comprehensive benefits package including Medical, Dental, Vision, Prescription Drug Coverage, 401k Plan, Wellness Program, Life Insurance, Tuition Reimbursement, Paid Time Off, Paid Parental Leave and Adoption Services, among other benefit plan options, subject to eligibility requirements. AMC Networks values the benefits achieved through in-office collaboration, but we provide our employees with the flexibility to work from home one day per week. The Company is committed to policy of nondiscrimination in its employment and personnel practices. Applicants are considered for all employment without regard to race, color, religious creed, religion, alienage, citizenship, gender, gender identity, national origin, ancestry, genetic predisposition or carrier status, age, marital status, familial status, military or veteran status, status as a victim of domestic violence, stalking or sexual assault, sexual orientation, disability or any other characteristic protected by federal, state or local law.

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: Supporting Incoming, in-process and final inspection including customer source inspections Obtaining and upholding IPC credentials required of the position. Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. Verifying compliance of in-process material against Customer and Industry Standards Ensuring documentation is accurately recorded and collected. Escalating systemic issues to Quality and Manufacturing Engineering Supporting first-piece verification runs with accompanying documents. Documenting non-conformities to the process and specifications Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. Advocating proper ESD, PPE, and FOD prevention Required Qualifications: Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment J-STD-001 Class 3 and/or IPC 610 certified Physically able to spend up to 8 hours a day using a microscope Familiarity with IPC Industry Standards High-School Diploma Preferred Qualifications: Experience working in an ISO-9001 and/or AS9100 Quality System environment Operating appropriate inspection equipment; (AOI, XRAY, etc.…) Ability to communicate openly and effectively to provide real-time feedback Ability to work in a fast-paced team environment Customer-Focused, "Zero-Defect" Mindset Documentation Abilities Computer literacy Industry-Relevant Quality Inspection or Control experience Willingness to cross train in multiple Quality areas This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.

Kit QC Inspector- Farmingdale, NY on site ICON plc is a world-leading healthcare intelligence and clinical research organization. We're proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development. Job Advert Posting At ICON, it's our people that set us apart. Our diverse teams enable us to become a better partner to our customers and help us to fulfil our mission to advance and improve patients' lives. Our 'Own It' culture is driven by four key values that bring us together as individuals and set us apart as an organisation: Accountability & Delivery, Collaboration, Partnership and Integrity. We want to be the Clinical Research Organisation that delivers excellence to our clients and to patients at every touch-point. In short, to be the partner of choice in drug development. That's our vision. We're driven by it. And we need talented people who share it. If you're as driven as we are, join us. You'll be working in a dynamic and supportive environment, with some of the brightest and the friendliest people in the sector, and you'll be helping shape an industry. Kit QC Inspector- Farmingdale, NY onsite The role: To ensure the quality and correctness of all visit kits distributed to investigator sites. Inspect all visit kits according to SOP prior to packing and transfer to the shipping department. Perform quality control of all visit kits as required by the SOP. Ensure all errors are corrected & logged appropriately. Inform the QC supervisor of any issues or delays. Achieve daily/weekly departmental Quota assigned. Perform additional responsibilities as requested by Management To be successful you will need: 2 to 3 years of QC experience Skills - Detail oriented, excellent organizational skills, Commutations skills and the ability to deal well with stress. Basic computer skills including knowledge in MS Outlook, of MS Word, Excel and typing skills. High School or Equivalent (Required) Hourly Rate range: Up to 23.50 hour Actual compensation will be determined based on factors such as geographic location, work experience, education/training, and skill level. You may be eligible for a bonus, stock compensation and commissions in some cases depending on your role and performance. Visit our careers site to read more about the benefits ICON offers. #LI-FL1 Benefits of Working in ICON: Our success depends on the quality of our people. That's why we've made it a priority to build a culture that rewards high performance and nurtures talent. We offer very competitive salary packages. And to keep them competitive, we regularly benchmark them against our competitors. Our annual bonuses reflect delivery of performance goals - both ours and yours. We also provide a range of health-related benefits to employees and their families and offer competitive retirement plans - and related benefits such as life assurance - so you can save and plan with confidence for the years ahead. But beyond the competitive salaries and comprehensive benefits, you'll benefit from an environment where you are encouraged to fulfil your sense of purpose and drive lasting change. ICON is an equal opportunity and inclusive employer and is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know through the form below. What ICON can offer you: Our success depends on the quality of our people. That's why we've made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our benefits examples include: * Various annual leave entitlements * A range of health insurance offerings to suit you and your family's needs. * Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. * Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals who are there to support you and your family's well-being. * Life assurance * Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidized travel passes, health assessments, among others. Visit our careers site to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We're dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless - there's every chance you're exactly what we're looking for here at ICON whether it is for this or other roles. Salary range: - Bonus, Com, Stock, Benefits & Disclaimer verbiage: Actual compensation will be determined based on factors such as geographic location, work experience, education/training, and skill level. You may be eligible for a bonus, stock compensation and commissions in some cases depending on your role and performance. Are you a current ICON Employee? Please click here to apply

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Job Description Schivo Medical, located in Plainview , NY, is a contract manufacturer that make medical components that enhance and save people lives. ***We are hiring a quality control inspector with knowledge in the manufacturing of medical and surgical tools*** Quality Control Inspector Job Overview: Quality Control related tasks such has verifying components that are produced to print and relate the results to appropriate personal. Quality Control Inspector Knowledge, Skills and Abilities Required: Perform in-progress inspection for all machined components. Operate CMM machines, Keyence and visions systems Review operator inspection reports and traveler information. Submit reports to shift supervisor and communicate the results to machine operators. Perform First Article Inspection for new parts (set ups) Follows established departmental policies, procedures, and objectives, continuous quality improvement objectives, and safety, environmental, control standards. Detail knowledge of inspection techniques, tools and methodology Experience using measuring tools a plus Ability to read and interpret engineering drawings and blueprints Must possess the ability to use a wide variety of measuring devices to perform dimensional inspection of components produced. Must be dependable and possess a willingness to learn new techniques. Medical and Aerospace manufacturing experience with emphasis on FAIR Follow the quality standards of ISO-13485 Knowledge of GD& T helpful Minimum Job Requirements & Education* Completed AAS degree(s) from an accredited institution that are above the minimum education requirement may be substituted for experience on a year for year basis. Concentration on taking classes based in quality and metrology plus High school diploma or GED; at least 2 years of experience in a CNC Manufacturing environment Benefits:* 401(k) 401(Match) Dental insurance Health insurance Vision insurance Life insurance EAP Program Employee referral program Long Term/short term disability Free coffee and tea daily Employee incentives ******Must be authorized to work in the United States********* Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.

Full-time Description A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

Job Description General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. Conduct in-process inspections at specified intervals to monitor quality and verify requirements. Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. Accurately record inspection results in logs, check sheets, or digital systems. Complete First Article Inspection Reports (FAIRs) as required. Communicate non-conformances promptly to machinists, supervisors, or the quality manager. Work closely with machinists, programmers, and setup personnel to validate machine setups. Provide feedback to promote continuous improvement. Ensure inspection activities comply with company standards and ISO/AS requirements. Support calibration and proper use of inspection tools. Maintain adherence to safety protocols and 5S practices. Ability to detect deviations and recommend corrective actions. Identifies potential quality risks after they become issues. Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required High school diploma or equivalent. 2+ years of experience in machining, manufacturing, or inspection environment Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) Ability to read and interpret blueprints and technical specifications Strong attention to detail and problem-solving skills Good written and verbal communication skills Experience with ISO 9001, AS9100, or similar quality management systems Familiarity with statistical process control (SPC) Knowledge of ERP/MRP systems or digital quality management tools. Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements Ability to stand, walk, or sit for extended periods. Ability to lift to 50 lbs. occasionally. Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

Kit QC Inspector- Farmingdale, NY on site ICON plc is a world-leading healthcare intelligence and clinical research organization. We're proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development. Job Advert Posting At ICON, it's our people that set us apart. Our diverse teams enable us to become a better partner to our customers and help us to fulfil our mission to advance and improve patients' lives. Our 'Own It' culture is driven by four key values that bring us together as individuals and set us apart as an organisation: Accountability & Delivery, Collaboration, Partnership and Integrity. We want to be the Clinical Research Organisation that delivers excellence to our clients and to patients at every touch-point. In short, to be the partner of choice in drug development. That's our vision. We're driven by it. And we need talented people who share it. If you're as driven as we are, join us. You'll be working in a dynamic and supportive environment, with some of the brightest and the friendliest people in the sector, and you'll be helping shape an industry. **Kit QC Inspector- Farmingdale, NY onsite** **The role:** To ensure the quality and correctness of all visit kits distributed to investigator sites. Inspect all visit kits according to SOP prior to packing and transfer to the shipping department. Perform quality control of all visit kits as required by the SOP. Ensure all errors are corrected & logged appropriately. Inform the QC supervisor of any issues or delays. Achieve daily/weekly departmental Quota assigned. Perform additional responsibilities as requested by Management **To be successful you will need:** 2 to 3 years of QC experience Skills - Detail oriented, excellent organizational skills, Commutations skills and the ability to deal well with stress. Basic computer skills including knowledge in MS Outlook, of MS Word, Excel and typing skills. High School or Equivalent (Required) **Hourly Rate range:** Up to 23.50 hour Actual compensation will be determined based on factors such as geographic location, work experience, education/training, and skill level. You may be eligible for a bonus, stock compensation and commissions in some cases depending on your role and performance. Visit our careers site (************************************* to read more about the benefits ICON offers. \#LI-FL1 Benefits of Working in ICON: Our success depends on the quality of our people. That's why we've made it a priority to build a culture that rewards high performance and nurtures talent. We offer very competitive salary packages. And to keep them competitive, we regularly benchmark them against our competitors. Our annual bonuses reflect delivery of performance goals - both ours and yours. We also provide a range of health-related benefits to employees and their families and offer competitive retirement plans - and related benefits such as life assurance - so you can save and plan with confidence for the years ahead. But beyond the competitive salaries and comprehensive benefits, you'll benefit from an environment where you are encouraged to fulfil your sense of purpose and drive lasting change. ICON is an equal opportunity and inclusive employer and is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know through the form below. **What ICON can offer you:** Our success depends on the quality of our people. That's why we've made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our benefits examples include: + Various annual leave entitlements + A range of health insurance offerings to suit you and your family's needs. + Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. + Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals who are there to support you and your family's well-being. + Life assurance + Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidized travel passes, health assessments, among others. Visit our careers site (************************************* to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We're dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here (****************************************************** Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless - there's every chance you're exactly what we're looking for here at ICON whether it is for this or other roles. Salary range: - Bonus, Com, Stock, Benefits & Disclaimer verbiage: Actual compensation will be determined based on factors such as geographic location, work experience, education/training, and skill level. You may be eligible for a bonus, stock compensation and commissions in some cases depending on your role and performance. Are you a current ICON Employee? Please click here (****************************************************** to apply

Job Advert Posting At ICON, it's our people that set us apart. Our diverse teams enable us to become a better partner to our customers and help us to fulfil our mission to advance and improve patients' lives. Our ‘Own It' culture is driven by four key values that bring us together as individuals and set us apart as an organisation: Accountability & Delivery, Collaboration, Partnership and Integrity. We want to be the Clinical Research Organisation that delivers excellence to our clients and to patients at every touch-point. In short, to be the partner of choice in drug development. That's our vision. We're driven by it. And we need talented people who share it. If you're as driven as we are, join us. You'll be working in a dynamic and supportive environment, with some of the brightest and the friendliest people in the sector, and you'll be helping shape an industry. Kit QC Inspector- Farmingdale, NY onsite The role: To ensure the quality and correctness of all visit kits distributed to investigator sites. Inspect all visit kits according to SOP prior to packing and transfer to the shipping department. Perform quality control of all visit kits as required by the SOP. Ensure all errors are corrected & logged appropriately. Inform the QC supervisor of any issues or delays. Achieve daily/weekly departmental Quota assigned. Perform additional responsibilities as requested by Management To be successful you will need: 2 to 3 years of QC experience Skills - Detail oriented, excellent organizational skills, Commutations skills and the ability to deal well with stress. Basic computer skills including knowledge in MS Outlook, of MS Word, Excel and typing skills. High School or Equivalent (Required) Hourly Rate range: Up to 23.50 hour Actual compensation will be determined based on factors such as geographic location, work experience, education/training, and skill level. You may be eligible for a bonus, stock compensation and commissions in some cases depending on your role and performance. Visit our careers site to read more about the benefits ICON offers. #LI-FL1 Benefits of Working in ICON: Our success depends on the quality of our people. That's why we've made it a priority to build a culture that rewards high performance and nurtures talent. We offer very competitive salary packages. And to keep them competitive, we regularly benchmark them against our competitors. Our annual bonuses reflect delivery of performance goals - both ours and yours. We also provide a range of health-related benefits to employees and their families and offer competitive retirement plans - and related benefits such as life assurance - so you can save and plan with confidence for the years ahead. But beyond the competitive salaries and comprehensive benefits, you'll benefit from an environment where you are encouraged to fulfil your sense of purpose and drive lasting change. ICON is an equal opportunity and inclusive employer and is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know through the form below. Are you a current ICON Employee? Please click here to apply: link

Job Advert Posting At ICON, it's our people that set us apart. Our diverse teams enable us to become a better partner to our customers and help us to fulfil our mission to advance and improve patients' lives. Our ‘Own It' culture is driven by four key values that bring us together as individuals and set us apart as an organisation: Accountability & Delivery, Collaboration, Partnership and Integrity. We want to be the Clinical Research Organisation that delivers excellence to our clients and to patients at every touch-point. In short, to be the partner of choice in drug development. That's our vision. We're driven by it. And we need talented people who share it. If you're as driven as we are, join us. You'll be working in a dynamic and supportive environment, with some of the brightest and the friendliest people in the sector, and you'll be helping shape an industry. Kit QC Inspector- Farmingdale, NY onsite The role: To ensure the quality and correctness of all visit kits distributed to investigator sites. Inspect all visit kits according to SOP prior to packing and transfer to the shipping department. Perform quality control of all visit kits as required by the SOP. Ensure all errors are corrected & logged appropriately. Inform the QC supervisor of any issues or delays. Achieve daily/weekly departmental Quota assigned. Perform additional responsibilities as requested by Management To be successful you will need: 2 to 3 years of QC experience Skills - Detail oriented, excellent organizational skills, Commutations skills and the ability to deal well with stress. Basic computer skills including knowledge in MS Outlook, of MS Word, Excel and typing skills. High School or Equivalent (Required) Hourly Rate range: Up to 23.50 hour Actual compensation will be determined based on factors such as geographic location, work experience, education/training, and skill level. You may be eligible for a bonus, stock compensation and commissions in some cases depending on your role and performance. Visit our careers site to read more about the benefits ICON offers. #LI-FL1 Benefits of Working in ICON: Our success depends on the quality of our people. That's why we've made it a priority to build a culture that rewards high performance and nurtures talent. We offer very competitive salary packages. And to keep them competitive, we regularly benchmark them against our competitors. Our annual bonuses reflect delivery of performance goals - both ours and yours. We also provide a range of health-related benefits to employees and their families and offer competitive retirement plans - and related benefits such as life assurance - so you can save and plan with confidence for the years ahead. But beyond the competitive salaries and comprehensive benefits, you'll benefit from an environment where you are encouraged to fulfil your sense of purpose and drive lasting change. ICON is an equal opportunity and inclusive employer and is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know through the form below. Are you a current ICON Employee? Please click here to apply: link

As a QC Technician, you will be a key player in ensuring product quality and safety throughout the production process of bread. Your role will encompass line auditing, environmental monitoring, air sampling, and participating in a monthly SQF audit. You will also be responsible for the calibration and verification of scales, monitors, and other basic instrumentation. Responsibilities * Conduct line auditing for bread production. * Perform environmental monitoring and air sampling. * Participate in monthly SQF audits. * Calibrate and verify scales, monitors, and other instrumentation. * Utilize MS Excel, Word, and Office for documentation. * Monitor and verify product quality following GMP. * Perform visual inspections and quality checks on product weights, codes, and labeling. * Address food safety issues and customer complaints with QA Supervisors. * Complete other periodic tasks as required. Essential Skills * Quality Control experience in the Food and Beverage industry. * High School Diploma. * Knowledge of Food Safety practices including SQF, FSMA, or HACCP. * Proficiency in Microsoft Word, PowerPoint, and Excel. * Ability to communicate effectively and work in a team. * Adaptability to change in a fast-paced production environment. Additional Skills & Qualifications * Bilingual proficiency is advantageous. * Experience in a GMP environment. * Familiarity with Environmental Monitoring, HACCP, SQF, Production, and Air Sampling. * HACCP or SQF Certification is a plus. * Passion for the food industry and a desire to grow in this field. Work Environment Join a thriving company known for its growth and expertise in the food industry. You will work in a dynamic Pastry Production facility, learning from leaders with over 20 years of experience in training technicians. The company imports and exports with European countries and distributes 300-500 additional items beyond their in-house manufacturing. This role offers an exceptional opportunity to expand your skills and contribute to a growing enterprise. Pay and Benefits The pay range for this position is $25.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Paterson,NJ. Application Deadline This position is anticipated to close on May 13, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

QUALITY CONTROL - WALDWICK NEW JERSEY START NOW !!!!!!!!!!!!!!!!!! ** We are looking for reliable and responsible candidate for warehouse associate in Waldwick. Pay rate: $13.50 (NEGOTIABLE DEPENDING ON EXPERIENCE) 2nd shift QA( Quality Assurance) Train for 2 weeks on 1st shift MONDAY - FRIDAY ( 7am-3:30pm) Regular hours MONDAY - FRIDAY 3pm-11:30pm OVERTIME AVAILABLE Must work weekends.( rotate) Requirements: Computer Knowledge, Inspecting Materials, Test Samples Able to stand all day performing this job. Bilingual is a plus Must have transportation Benefits offered - Health Care Sick Pay 401 k offered in 2021 MUST HAVE TRANSPORTATION!!!!!!!!!!!!!!!! Start now! Vaccinated

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.