Quality control inspector jobs in Wisconsin - 523 jobs

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, well give you what you need to make it happen. It wont always be easy, growing takes grit. But Inventory Control, Intern, Spring, Inventory, Manufacturing Engineer, Control, Banking, Business Services

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm. • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed. • Perform rotational capacity tests on bolts prior to use in shop. • Work with outside inspectors to resolve quality issues on the floor. • Monitor welder qualification tests. • Monitor and record welding parameters to insure compliance to approved WPS. • Be able to read and understand the Welding code and Specifications. • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Perform in a manner that will assure quality work flowing through the shop. • Work with welders and leadmen to maintain quality. • Be available, by use of a radio, etc. to perform needed checks. • Maintain a log of work done, and complete required reports. • Interpret the Specifications and applicable Codes. • Ability to be flexible to work either early or late within assigned shift as needed. • Coordinate inspection of QC hold points between production and DOT Inspectors. • Use and encourage safe working habits. Must have CWI Certification NACE or BCI Certification is desired Ability to be conscious of Specifications and Company standards Ability to be organized and precise in maintaining a diary and reports Must have good people skills in dealing with difficult situations Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. • Coordinate your work with shipping department to assure loads have been inspected and ready to ship. • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time. • No accidents. A safe worker is an asset to both their fellow worker and the company. • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Friday - Sunday 5am - 5pm

Under the direction of the Quality Lab Supervisor, with guidance from the Quality Lab Tech Lead, the Quality Assurance Lab Technician is responsible for the completion of testing and inspection, dimensional analysis and support of other departments within HellermannTyton. This position requires the Technician be able to complete product/process inspections in a product enviornment as well as a lab environment while managing files and software. Overtime will be required including some weekend hours. This position will also maintain HellermannTyton's TS16949/ISO14001/EMS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Understand Customer Expectations as they relate to Product Quality Thrive in and help support a Team Atmosphere Help support the HellermannTyton Team by mentoring Operators regarding Quality of Product Perform 1st Piece Inspection of manufactured product Perform in-process inspection of manufactured product Perform Product specific tests including but not limited to tensile Perform moisture analysis on manufacutured product as well as incoming Verify Material Certification and Approve raw material Enter and edit SPC data in the SPC computer file File all QA records and samples (obsolete and current). Use incoming color chip samples to verify colorant in receiving Handle non-conforming material isolation and documentation Perform a dimensional layout referencing the HellermannTyton drawing Use SPC software Record all inspection and test data. Weigh parts. Use control plans. PPAP and PPC testing. Assist in maintaining HellermannTyton's Quality and Environmental certification by supporting: Corporate policies, procedures, work instructions and required documentation. Other Functions Become a "Go To" person for production personnel regarding Quality of Product Determine "Clean Point" when a non conformance is found Support LEAN Work Environment Other duties may be assigned. Key Competencies Ability to read Blue Prints Ability to use basic hand meausring tools Have basic math skills Ability to comminicate effectively both written and orally Basic computer skills a plus Injection Molding knowledge a plus Qualifications (skills, knowledge, experience) High school diploma or equivalent required. 1 year prior lab experience preferred Good math and communication skills. Computer skills - Windows, Excel Good vision. Mic and caliper knowledge preferred. Problem solving skills. Blue print reading skills preferred. Excellent verbal & written communication skills. Bend over in order to lift 50lbs. Ability to lift/push/pull up to 50 lbs. All employees entering the Manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) for their position. Wearing your Personal Protective Equipment (PPE) is a condition of employment. Ability to work daily and weekend overtime to meet the needs of the department and customer. #LI-Onsite #LI-KN1 Rev. 5.18.2023 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

The Certified Welding Inspector (CWI) is responsible for ensuring steel fabrication work complies with DOT requirements, approved specifications, and company quality standards. This role supports shop operations by coordinating inspections, overseeing welding activities, and helping maintain efficient production flow. Key Responsibilities: Coordinate QC hold points and inspections with production staff and DOT inspectors Conduct visual, dimensional, and layout inspections; operate Total Station as required Monitor welder qualifications and ensure compliance with approved Welding Procedure Specifications (WPS) Perform material inspections and bolt rotational capacity testing Collaborate with internal teams and third-party inspectors to resolve quality issues Maintain accurate inspection records, reports, and documentation Promote and adhere to safe work practices Qualifications: CWI Certification (required) NACE or BCI Certification (preferred) Ability to read and interpret welding codes and project specifications Strong communication, organizational, and teamwork skills Proficiency with Total Station equipment Flexible availability to support production schedules

**Posting Title:** Quality Technician **Reports To:** Quality Manager **Salary Range:** $28.00/hour to $32.00/hour Final determination of a successful candidate's starting pay will vary based on a number of factors, including market location and may vary depending on job-related knowledge, skills, education and experience. The pay scale listed for this position is generally for candidates that meet the specified qualifications and requirements listed on this specific job description. We provide a competitive compensation package that recognizes your experience, credentials, and education alongside a robust benefits program to meet your needs. Our compensation reflects the cost of labor across several US geographic markets. **WHO WE ARE** For more than 70 years, Cupertino Electric, Inc. (CEI) has been powered by people who've built a reputation for delivering high-profile, complex projects. Real, tangible things that alter the landscape and improve lives. But even more than that, we've built a reputation for integrity. We're problem solvers and innovation seekers. We're team players and safety fanatics. And we always-always-do the right thing. Even when no one is looking. Because what we do here is important, but how we do it is everything. **THE MODULAR TEAM** Modular solutions by CEI anticipate and solve ongoing problems for data center operators. Our proven, factory-built and tested data center infrastructure products bring deployments online faster, more reliably, and with less risk than conventional methods. **ABOUT THE ROLE** Working in line with Cupertino's core values, the person in this role will work closely with manufacturing on first piece, in-process, and final inspection. Will monitor supply base and in-house processes for product conformance. Will issue, track, and verify corrective actions requested from internal or customer, and issued to our supply base. The role involves developing an Equipment Log using various forms, one-lines, drawings, BOMs, etc., and identifying OFCI (Owner Furnished Contractor Installed) equipment to ensure its proper documentation. Responsibilities include tracking the receipt of proper OFCI, maintaining a tracking document, and coordinating with Materials, Quality, Production, and Project Management groups upon receipt. You will act as a liaison to the project management group to ensure clients are informed about what has and hasn't been received, prepare receiving reports, and coordinate with the NETA testing group to prioritize their testing sequence. Additionally, the position involves completing clients' prescribed notification systems such as Procore, ACC, BIM, etc., tracking equipment through the assembly process to ensure proper usage, and ensuring that equipment will work in the process as designed (e.g., stub-ups, openings). A key expectation is to be a team player and professionally vocal as issues arise. **Knowledge:** Developing professional expertise, applies company policies and procedures to resolve a variety of issues. **Job Complexity:** Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors. Exercises judgment within defined procedures and practices to determine appropriate action. Builds productive internal/external working relationships. **Supervision:** Normally receives general instructions on routine work, detailed instructions on new projects or assignments. **ABOUT YOU** + Proficient in reading drawings, blueprints, one-lines to identify equipment as called out on these documents + Journeyman level electrical knowledge or experience + Proficient in Microsoft Office + Must be able to pass PIT licensing test **MINIMUM QUALIFICATIONS** _Any combination of education and experience that would likely provide the required knowledge, skills and abilities as well as possession of any required licenses or certifications is qualifying._ **Education:** High School Diploma or GED required. **Experience:** 3+ years' experience in manufacturing or construction. Minimum 3 yrs. in a quality role **WORK ENVIRONMENT** + Mostly in assembly plant however, traveling to vendors which may be loud and/or dirty, is possible + May be required to sit/stand at desk/computer, and/or walk the production floor for extended time + May be required to work on job site in all kind of weather + Hard Hat, Gloves, Safety Glasses and appropriate foot ware (supplier or job site-Safety toe) **PHYSICAL DEMANDS** + Sitting/standing/working for extended times + Lifting 25lbs not uncommon *Applicants must be authorized to work in the United States. This position is not eligible for sponsorship. \#LI-DR1 **PLEASE NOTE:** CEI will never ask for any money or financial information from applicants during the hiring process. To learn more about "job scams" how to avoid them, click here. (******************************************** CEI is a place where every single person can-and does-have an impact on the work we do and the communities we serve. Here, you can build your own story and grow to your full potential. You can collaborate and celebrate with amazing people. And you'll go home every day knowing you helped contribute to important work that shapes people's lives. Our commercial, data center and energy projects may be complex, but our approach is simple. We build great things and we do it with great people. The job duties listed are typical examples of work performed by positions in this job classification and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks, and responsibilities. Specific duties and responsibilities may vary depending on department, program or project needs without changing the general nature and scope of the job or level of responsibility. Employees may also perform other duties as assigned. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Cupertino Electric Inc. aims to make cei.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact us at *************** or 1-(877)-747-4CEI. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Quality Control Inspector - 1st Shift, 7am-3:30pmPay: $20-$24/hour (Based on Experience) At our client, they don't just build components-they ensure quality at every step. As a Quality Control Inspector, you'll play a critical role in maintaining the excellence our customers depend on. If you're detail-driven, reliable, and ready to grow within a fast-paced manufacturing environment, this is your opportunity to make an impact. We are seeking a meticulous and motivated Quality Control Inspector for our 1st shift team. You will be responsible for performing Incoming, In-Process, and Final Inspections, using traditional metrology tools to ensure components meet required specifications and quality standards. Essential Duties and Responsibilities: Inspect alignment and dimensions of parts using ID/OD micrometers, height stands, and calipers Perform manual drafting to document dimensional requirements Verify parts against product specifications, drawings, and part lists Visually examine parts and document production results Ensure all inspections and records comply with the Quality Management System and Customer Requirements Confirm assembly completeness and identify missing or incorrect hardware Participate in ongoing training and maintain equipment certifications Required Competencies & Skills: Proficient with manual inspection tools (Micrometers, Calipers, Height Stands) Ability to read and interpret manufacturing drawings and blueprints Strong verbal and written communication skills Solid mathematical knowledge including geometry, trigonometry, fractions, decimals, and layout functions Excellent critical thinking, problem-solving, and time management abilities Adaptable and able to work both independently and as part of a team Preferred Qualifications: Valid driver's license Prior experience in a manufacturing or quality control environment Exceptional attendance record (required) Completion of Overhead Crane and Forklift Training (training provided upon hire if needed) Physical Requirements: Frequent standing, walking, climbing, stooping, kneeling, bending, and lifting (up to 50 lbs) Frequent use of hands, tools, and inspection equipment Occasional talking or hearing in a production setting

The Bruce Company is proud to be a local, family-run landscaping company that's been in business for 70 years. We are passionate about achieving incredible results for our customers and offer an exciting and collaborative company culture where our employees grow along with our company. Why Choose The Bruce Company? Weekly Pay : Consistent, year-round work and benefits. Impact : Beautify the outdoor environment and make a tangible difference in your community. Prestige : Work on some of the largest and most prestigious projects in Dane County. Career Growth : Establish your career with Southern Wisconsin's landscaping leader. Are you a plant expert who loves teaching others? We're looking for a Plant & Nursery Quality Inspector to help raise the standard of plant care across our nursery and holding yard. This role is all about ensuring healthy, thriving plants while coaching and supporting staff to build strong plant knowledge and consistent care practices. What You'll Do: Inspect trees, shrubs, and plants daily to ensure top health and quality Identify pests, diseases, and plant care issues-and guide staff in prevention and treatment Mentor and train team members to improve their plant knowledge and care techniques Oversee pruning, watering, fertilizing, spacing, and overall plant maintenance Maintain accurate records on plant health, treatments, and quality outcomes Support customers and staff by sharing your expertise in plant selection and care What We're Looking For: Extensive knowledge of plant species, growth requirements, pests, and diseases 3-5 years of nursery, greenhouse, or plant care experience (preferred) A natural teacher with strong communication and coaching skills Attention to detail and commitment to high-quality plant care Ability to work outdoors in all weather conditions Why Work With Us: Full-time, year-round position (with some seasonal winter slowdown) Competitive pay plus benefits (medical, dental, vision, PTO, 401k) A chance to mentor and shape the next generation of plant care professionals Be part of a respected company with over 40 years of horticultural excellence Working Conditions and Physical Requirements Work is primarily performed outdoors during all seasons. Exposure to outdoor weather conditions, including inclement weather (rain, snow, heat or cold). Work is often performed on uneven ground conditions (mud, snow, rocks, etc) The noise level in the work environment is usually moderate. Hearing protection is required for duties such as equipment operation that expose the individual to elevated noise levels. The duties of this position expose the individual to chemicals and fertilizers. If you're passionate about plants and thrive on helping others learn and grow, we'd love to have you on our team. Apply today and grow with us at The Bruce Company. Benefits The Bruce Company offers a competitive salary, including medical, dental, vision, life, disability, and retirement benefits, paid vacation, holidays, and more coupled with a challenging and team-oriented work environment to help you succeed in your career. Join our team of outdoor living experts and experience for yourself why many of our employees have chosen to make their life-long careers at The Bruce Company. Visit us at ******************** to learn more. The Bruce Company is proud to be an Affirmative-Action Equal Opportunity Employer.

The Quality Technician ensures that products and processes meet established quality standards by conducting inspections, tests, and audits. This role involves collaborating with production, engineering, customer service, and sales teams in identifying quality issues, and assisting with implementing corrective actions to maintain compliance with company and regulatory requirements. This individual will report to the Quality Supervisor and be a strong partner to our operators and supervisors on the floor. This person will have to captivate and communicate with all departments to address issues, propose resolutions, and see through the quality vision for the company. They will also maintain proper reporting, documentation, and any other necessary routines for the department. Essential Duties and Responsibilities This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Read and interpret blueprints, engineering drawings, and technical specifications to verify that products meet required standards. Use standard measurement tools and equipment (e.g., calipers, tape measures, micrometers, gauges) to check and document product dimensions. Perform visual and dimensional inspections on incoming materials, in-process production, and finished goods. Record inspection results accurately and communicate nonconformances to appropriate personnel. Support Shipping & Receiving by inspecting incoming and outgoing products when required. Maintain and organize quality logs, including Nonconforming Material (NCM) records, Returned Material Authorization (RMA) records, and scrap tracking logs. Assist in monitoring scrap trends and providing relevant inspection data to production. Track and maintain the calibration status of measuring tools and equipment. Participate in internal audits to verify compliance with established procedures, quality standards, and customer requirements. Assist with quality documentation activities such as PPAPs or first article inspections, when needed. Support training efforts by helping production employees understand quality standards and proper inspection methods. Participate in problem-solving activities to help identify root causes of quality issues and support corrective actions. Work independently to perform inspections, maintain logs, and resolve routine quality issues with limited on-site supervision. Communicate end-of-shift updates, nonconformances, and outstanding issues to the incoming shift and QC leadership. Coordinate with operators and supervisors to ensure quality standards are maintained throughout the shift. Provide flexible inspection support across multiple production departments as required. Maintain knowledge of quality standards and best practices through training and professional development. Perform other quality-related duties as assigned. Work in accordance with company policies, mission, and values at all times. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Strong attention to detail and commitment to customer experience. Possesses ability to use gauges such as calipers and micrometers to measure products. Able to read and understand Engineering drawings and blueprints. Effective communicator to various audiences using verbal and written skills. Education and/or Experience High school diploma or equivalent required. Associates or Bachelor's Degree or equivalent experience is a plus. 3 or more years working in a manufacturing operations environment. 1 or more years' experience working with quality assurance/control is preferred. Experience with Microsoft Office software such as Windows, Word, Excel, PowerPoint, Teams, Outlook. Experience with Global Shop Solutions ERP system is a plus. Schedule2nd shift: Monday - Thursday 2:45pm-12:45amBenefits Medical (Anthem) Dental (Anthem) Vision (Anthem) Life Insurance Supplemental Insurance 401k with matching Paid Holidays Paid Time Off Paid Parental Leave Incentive Plan Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Frequent: Seeing Hearing Standing, walking or mobility for long periods of time Lifting, pulling, or pushing up to 50 pounds without assistance Climbing, stooping, or kneeling Fingering, grasping, feeling, typing Activities are performed on a routine basis using personal protective equipment (PPE) such as glasses, shoes, and earplugs. At times, face shields, aprons, suits, and other PPE may be required. Employee will operate various hand tools, power hand tools and machine tools. Note: The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. It should not be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Work Environment Normal office and factory environment. Slight exposure to dust, noise, fumes, and oils is present. We are great people that make a great product! At Tanis Brush, we design and manufacture various industrial and utility brushes that help other businesses thrive. Our brushes are used for cleaning, sorting, painting, finishing and protecting equipment, machinery, parts and many other applications. Since 1987, Tanis has been known for our vast selection of brush products, resourceful specialty design, engineering capabilities, and exceptional customer service. Tanis Brush provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, ancestry, national origin, citizenship, sex or gender (including pregnancy, childbirth, and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, religion, age, disability, genetic information, service in the military, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.

Temp To Full-Time Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality, and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner.

Job Description The Quality Control Inspector II plays a vital role in ensuring that products meet all design and contract requirements as defined by engineering drawings and specifications. This position is actively involved in first article, pre-production development, production, and incoming inspection stages of manufacturing and assembly. The Quality Control II Inspector is responsible for verifying product conformance through detailed inspections and documentation, ensuring all assembly, final inspection, and incoming inspection activities are complete and accurate. Once verified, products are cleared for movement into inventory and/or shipment. Responsibilities Performs inspection activities, such as complex visual and dimensional inspections on incoming, final inspections, first article inspections as well as during in-process inspection. Ensure all Quality Control documents, such as travelers and inspection sheets, are maintained daily, with all entries kept up to date and accurate. Prepare and create inspection documents such as written description of inspection results including deviation from engineering specification. Manage and assigned inspection priorities based the customer PO due dates. All shop floor and suppliers originated non-conformance (NCMR log) to be written by the Quality Control Inspector I and II for the product/processes, except for those written by QM or QA. Assists QA's with identifying nonconforming conditions that present existing or impending defective conditions at the system or subsystem level of assembly or incoming inspection, audits and preparing inspection plans such as creating inspection documents and routing, updating inspection documents and routing, and data collection and root cause analysis investigations. Provides general support of QA's including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, 8D, statistical studies. Participates and supports problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Perform material movement transactions after completing inspection process. Use calipers, micrometers, HI-POT tester, continuity test board, thread gauges, height gauges, gauge blocks, tape ruler, steel ruler and other related inspection equipment to perform the work. Prepare inspection reports, Certificate of Conformance, and assist with FAI (First Article Inspection) reports and customer certification requirements. Communicate project status and quality challenges with department managers/leads. Guide less experience inspectors, providing solutions and maintaining rigorous quality control procedures. Support production teams in adhering to ISO 9001 processes. Participate in audits and compliance projects as assigned. Follow applicable procedures and work instruction while offering ideas for improvement. Work with cross-functional teams to ensure quality objectives are met throughout the production process Other duties as assigned Accepting this position requires candidates to complete and pass a background check.

SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS

Job Description We appreciate your interest in joining our team! At Robinson, Inc. we pride ourselves on our manufacturing solutions and ownership culture, which support the industries we serve and our local communities. Robinson is employee-owned and is driven by a dedicated team of skilled professionals that value trust, loyalty, teamwork, integrity, and accountability as the foundations of our organization. We strive to provide customer service that goes above and beyond the standard. Click here to view our Benefits Snapshot JOB OVERVIEW The Electrical Quality Inspector plays a critical role in ensuring the excellence of our generator and electrical enclosures. Perform detailed enclosure and electrical inspections, supervise third party and customer inspections, and delegate tasks to keep operations running smoothly. Commitment to precision will help guarantee that every product meets the highest standards after reaching our customers. This role also supports the coordination and oversight of shipping essential enclosure components as needed. ROLE + RESPONSIBILITIES (includes but not limited to) Conduct comprehensive inspections of electrical enclosures, generator systems, panel boards, transformers, and distribution equipment. Supervise third‑party and customer inspections to ensure full compliance with quality standards. Review and sign off on enclosure and electrical inspection forms with accuracy and professional accountability. Collaborate across departments to prioritize tasks, coordinate workflows, and maintain project momentum. Assist with the shipment of enclosures, tanks, and related parts as operational needs arise. Promote and follow safe manufacturing and material‑handling practices in all work areas. Manage multiple projects simultaneously while maintaining clear, effective communication with internal teams. Demonstrate strong organizational and planning skills to meet deadlines and support project completion. Exhibit teamwork and professionalism by collaborating effectively, offering assistance, and responding constructively to feedback. QUALIFICATIONS Education: high school diploma or equivalent required. Experience: minimum 2 - 3 years commercial/industrial experience preferred in addition to experience with panel boards, transformers and distribution equipment. State journeymen or master's license a plus. PREFERRED SKILLS Medium voltage and electronics experience State journeyman or master's license; working knowledge of NEC and NFPA 70 codes. TRAVEL REQUIREMENTS Travel to other Robinson facilities may be required at times. OUR COMMITMENT At Robinson, we value professionalism, expertise, and a dedication to craftsmanship. We offer a dynamic work environment where employees are empowered to excel and grow within their roles. Join us in our mission to deliver exceptional metal fabrication solutions while fostering a culture of collaboration, innovation, and employee satisfaction. Robinson is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

About Us: SMC Ltd. is a globally recognized premium supplier to the medical market with locations throughout the world. People committed to speed, technology, and exceptional performance are the cornerstone of our organization. Comprised of dedicated people and decades of manufacturing experience, we have continued to experience strong growth and currently have outstanding career opportunities for equally dedicated people. Job Summary: Perform routine visual and dimensional inspections of received, in-process, and finished components, subassemblies, and device products to pre-defined dimensions and specifications. Monitor and verify inspection data in accordance with specifications, statistical process, or other control procedures. Provide effective communication regarding product quality status to manufacturing teams. Regular attendance with occasional overtime and other duties as assigned. Essential Job Duties and Responsibilities: Pharma • Perform incoming receiving inspection of pharmaceutical products ensuring accuracy of paperwork and physical sampling. • Perform in-process and product testing inspections with attention to critical accuracy of data entry through either manual or direct data import actions.• Initiate MRB's, properly contain product for any nonconformances.• Perform accurate review and closure of BHR & DHR's, including yield, reconciliation, and OOS. • Responsible for verifications of rework activities independently. • Problem solves inspection equipment and program issues for inaccuracies or poor performance. Essential Qualifications: • Experience in Pharmaceutical Device manufacturing / drug handling• Class 7/ISO 10,000 Cleanroom experience • Critical attention to detail. • Demonstrate strong decision-making abilities. • Proficient knowledge of Good Documentation and Good Manufacturing Practices. • Proficient use of the ERP system. ADA Requirements: • Stand, walk, bend, squat, twist, reach or otherwise move frequently.• Occasional repetitive motion and grasping• Occasional climbing to reach areas on machines or racks.• Lift, move or otherwise transfer up to 30lbs. occasionally, >20.frequently• Typically sits, grasps items, or performs keyboarding for occasional operation of a computer.• Exposure to typical machine shop physical hazards which may require respiratory protection. What SMC has to offer? Clean, Climate-Controlled Environment Stable schedule Paid holiday and PTO Health, dental, and vision insurance 401(k) retirement savings Life and disability insurance Promotional opportunities Training and career growth programs Amazing co-workers Tuition reimbursement Employee Assistance Program At SMC Ltd. we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. SMC Ltd. is an equal opportunity employer. M/F/D/V; this organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. #IND #LI-HN1

Acute Care TechnologyAt ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $20.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Working from customer specifications, technical drawings or verbal instructions, the Quality Control Inspector ensures product quality which meets SCS standards and the expectations of customers. The Quality Control Inspector performs this function by using specialized tools, tests or procedures to identify quality issues on incoming, outgoing, and in-process products. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: · Inspects incoming products against customer defined specifications and internal processes. · Inspects outgoing products against customer defined specifications and internal processes. · Completes and approves NCMR's for incoming/outgoing customer products. · Assists Quality /Engineering personnel in root cause analysis and completion of Supplier Corrective Action Requests and Internal Corrective Action Requests. · Understands and meets quality requirements as defined in Manufacturing Standard Procedures (MSP's). · Responsible for in-process and final inspection of customer parts to insure masking and de-masking procedures are correct and complete per process and / or proper thickness requirements are met. ADDITIONAL FUNCTIONS AND RESPONSIBILITIES: · May operate precision measuring instruments and record results. · May perform daily tasks in a clean room environment. · Maintains a high level of personal hygiene. · Maintains a neat and orderly work area. · May assist in packing, preparing for shipment and shipment of customer parts as well as preparing the shipping documents and coordinating with Customer Service. · Adheres to plant and corporate safety policies. · May assist in other areas or perform other duties as required by fluctuating business needs. EDUCATION, CERTIFICATES, LICENSES, REGISTRATIONS AND/OR EXPERIENCE: High School Diploma or General Education Degree (GED). BASIC SKILLS: · Ability to comprehend and carry out English written and verbal instructions, short correspondence, and memos. · Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. · Ability to read/interpret engineering drawings and wiring diagrams. · Excellent time-management skills with the ability to work independently with little supervision. · Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. · Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. · Ability to communicate data, instructions, production results, quality issues, and similar subjects both verbally and in writing. · Ability to utilize basic Microsoft office products such as: Excel, Word, Email, etc. · Ability to troubleshoot. · High degree of manual dexterity and hand-to-eye coordination. · Ability to distinguish between the colors of red, orange, yellow, blue, green and violet. · Able to read at a 20/20 visual acuity using a Jaeger eye chart (near vision) with or without vision correction. Able to read No. 1 at 14” distance, or No. 2 at 20” distance, or No. 3 at 24” distance.

Primary Duties and Responsibilities: Perform testing and measurement of products to ensure compliance with Orchid Monroe, LLC and customer requirements. Conduct in-house calibration of instruments, maintain calibration schedules, and accurately document results in the calibration system and on instruments. Inspect and test incoming raw materials and components, including dimensional, chemical, and soft-magnetic properties. Perform internal product audits and ensure audit findings are addressed appropriately. Operate and maintain specialized testing equipment such as fluoroscopy machines, Epstein testers, and humidity chambers. Conduct customer-specific testing (e.g., phosphate thickness via XRF) in accordance with customer specifications. Properly document, contain, and control all non-conforming products, ensuring timely resolution. Maintain quality documentation and records in compliance with ISO/IATF requirements. Support PPAP submissions, engineering changes, and the validation of gauges and Control Plans/QRRs. Provide quality support to manufacturing operations, assisting in root cause analysis, problem-solving, and corrective/preventive actions. Participate in continuous improvement activities to enhance processes, reduce waste, and improve product reliability. Ensure the laboratory environment and equipment meet operational and cleanliness standards. Analyze and interpret test data, including statistical calculations (cpk, ppk, standard deviations, trends, etc.), and communicate results in clear, concise reports or presentations. Enforce compliance with safety regulations and promote a culture of workplace safety. Execute quality checks per Control Plans/QRRs and document objective evidence. Stop production if processes produce nonconforming product or waste. Validate gauges, initiate recalls when calibration issues are found, and ensure corrective actions. Control and quarantine nonconforming product, escalating to supervision and Quality Assurance as necessary. Maintain current knowledge of quality documentation, requesting updates or revisions when appropriate. Perform other related duties as assigned by supervision. Qualifications: Education & Experience: Associate's Degree in Quality, Engineering Technology, or related field; or equivalent work experience. Minimum of five (5) years of quality assurance experience in a manufacturing environment, preferably in metrology. ASQ Certified Quality Technician (CQT) strongly preferred. Technical Skills: Proficient in operating manual and DCC/CMM systems and vision measuring systems. Strong ability to interpret engineering drawings, with emphasis on GD&T and 3D datum structures. Advanced data analysis skills using Microsoft Excel or equivalent tools (e.g., cpk, ppk, SPC analysis). Solid math skills applicable to measurement, SPC, GD&T, and MSA. Knowledge of ISO 9001:2015 and IATF 16949:2016 standards. Communication Skills: Ability to read, write, and interpret technical content in English. Strong verbal and written communication skills for cross-functional collaboration. Other Requirements: Physical ability to work safely in a manufacturing and lab environment (standing, kneeling, lifting product, vision acuity for inspection, etc.). Work distribution: Lab (40%), Manufacturing Floor (20%), Desk/Computer (40%). Diversity & Inclusion Statement UPG Electrical is an equal opportunity employer committed to a diverse and inclusive workforce.

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm. Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. Perform visual inspection of material as required. Perform layout checks as needed. Perform rotational capacity tests on bolts prior to use in shop. Work with outside inspectors to resolve quality issues on the floor. Monitor welder qualification tests. Monitor and record welding parameters to insure compliance to approved WPS. Be able to read and understand the Welding code and Specifications. Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? Perform in a manner that will assure quality work flowing through the shop. Work with welders and leadmen to maintain quality. Be available, by use of a radio, etc. to perform needed checks. Maintain a log of work done, and complete required reports. Interpret the Specifications and applicable Codes. Ability to be flexible to work either early or late within assigned shift as needed. Coordinate inspection of QC hold points between production and DOT Inspectors. Use and encourage safe working habits. Must have CWI Certification NACE or BCI Certification is desired Ability to be conscious of Specifications and Company standards Ability to be organized and precise in maintaining a diary and reports Must have good people skills in dealing with difficult situations Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. Coordinate your work with shipping department to assure loads have been inspected and ready to ship. Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. Outstanding work record, great attendance record and always-on time. No accidents. A safe worker is an asset to both their fellow worker and the company. Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Friday - Sunday 5am - 5pm Compensation details: 26-35 Hourly Wage PI73f9b198bed2-31181-39357892

The Bruce Company is proud to be a local, family-run landscaping company that's been in business for 70 years. We are passionate about achieving incredible results for our customers and offer an exciting and collaborative company culture where our employees grow along with our company. Why Choose The Bruce Company? Weekly Pay: Consistent, year-round work and benefits. Impact: Beautify the outdoor environment and make a tangible difference in your community. Prestige: Work on some of the largest and most prestigious projects in Dane County. Career Growth: Establish your career with Southern Wisconsin's landscaping leader. Are you a plant expert who loves teaching others? We're looking for a Plant & Nursery Quality Inspector to help raise the standard of plant care across our nursery and holding yard. This role is all about ensuring healthy, thriving plants while coaching and supporting staff to build strong plant knowledge and consistent care practices. What You'll Do: Inspect trees, shrubs, and plants daily to ensure top health and quality Identify pests, diseases, and plant care issues-and guide staff in prevention and treatment Mentor and train team members to improve their plant knowledge and care techniques Oversee pruning, watering, fertilizing, spacing, and overall plant maintenance Maintain accurate records on plant health, treatments, and quality outcomes Support customers and staff by sharing your expertise in plant selection and care What We're Looking For: Extensive knowledge of plant species, growth requirements, pests, and diseases 3-5 years of nursery, greenhouse, or plant care experience (preferred) A natural teacher with strong communication and coaching skills Attention to detail and commitment to high-quality plant care Ability to work outdoors in all weather conditions Why Work With Us: Full-time, year-round position (with some seasonal winter slowdown) Competitive pay plus benefits (medical, dental, vision, PTO, 401k) A chance to mentor and shape the next generation of plant care professionals Be part of a respected company with over 40 years of horticultural excellence Working Conditions and Physical Requirements Work is primarily performed outdoors during all seasons. Exposure to outdoor weather conditions, including inclement weather (rain, snow, heat or cold). Work is often performed on uneven ground conditions (mud, snow, rocks, etc) The noise level in the work environment is usually moderate. Hearing protection is required for duties such as equipment operation that expose the individual to elevated noise levels. The duties of this position expose the individual to chemicals and fertilizers. If you're passionate about plants and thrive on helping others learn and grow, we'd love to have you on our team. Apply today and grow with us at The Bruce Company. Benefits The Bruce Company offers a competitive salary, including medical, dental, vision, life, disability, and retirement benefits, paid vacation, holidays, and more coupled with a challenging and team-oriented work environment to help you succeed in your career. Join our team of outdoor living experts and experience for yourself why many of our employees have chosen to make their life-long careers at The Bruce Company. Visit us at ******************** to learn more. The Bruce Company is proud to be an Affirmative-Action Equal Opportunity Employer.

Job Description SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS Powered by JazzHR jgvb QKIpWa