Quality control microbiologist full time jobs

The Sanitation Technician will be responsible for all aspects of externally sanitizing all production equipment and the cleanliness for the entire plant. Schedule: 2nd Shift (4:00PM - 3:30AM) ESSENTIAL DUTIES AND RESPONSIBILITIES: Knowledge of all cleaning agents and applications, external, internal, cleaners, and sanitizers. Properly document and follow all procedures set forth in the frequency guide and standards. Ability to properly clean all production and packaging equipment as specified. Ability to properly measure and follow proper mixing procedures. Ability to evaluate equipment sanitation to food and safety standards. Ability to accurately interpret written instructions, handles complex and difficult jobs efficiently Responsible for compliance of company rules and regulations of food and safety standards. Other duties assigned by supervisor LANGUAGE SKILLS: Ability to read reports and other documents, analyzes, and interprets common information. Ability to effectively present information to management as required. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to walk, stand or sit for long periods of time. The employee frequently is required to use hands and fingers, to handle, or feel equipment for the purpose of sanitation. Run heavy equipment. Must be able to lift up to 50 pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn and which may include, but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor. The noise level in the work environment is usually moderate, but increases significantly in warehouse and manufacturing plants. MINIMUM QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High School Diploma or GED or equivalent work experience required. Prior experience in the carbonated soft drink industry a plus. Understands and can follow all OSHA/GMP/HACCP required training. Must be 18 years or older Favorable background and drug screen. Ability and willingness to work a flexible Full Time schedule that may include weekends and holidays. Must be able to provide own transportation to various locations in organizational service areas, as required by duties. Shasta Beverages, Inc. provides equal employment opportunities to all applicants for employment without regard to race, color, religion, sex, national origin, age, disability, gender, genetics, gender identity, disabled veterans or sexual orientation.

**Brand:** Michael Foods Inc. **Categories:** Quality **Position Type:** Regular Full-Time **Remote Eligible:** No **Req ID:** 29139 **Job Description** **Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that's First in Food** _._ **Location Description** Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods' most recent greenfield project, producing high quality protein shakes serving people all around the world. It's our honor to continue our strong commitment to our employees, our community, and our environment. **Responsibilities** **This is a night shift role - 6:00pm - 6:30am rotating schedule (work 4 days one week, 3 the next)** WEEK 1 - 40 hours regular / 8 hours over-time _Sunday OFF_ **Monday Work 6:00pm - 6:30am** **Tuesday Work 6:00pm - 6:30am** _Wednesday OFF_ _Thursday OFF_ **Friday Work 6:00pm - 6:30am** **Saturday Work 6:00pm - 6:30am** WEEK 2 - 36 hours regular **Sunday Work 6:00pm - 6:30am** _Monday OFF_ _Tuesday OFF_ **Wednesday Work 6:00pm - 6:30am** **Thursday Work 6:00pm - 6:30am** _Friday OFF_ _Saturday OFF_ _We get paid every 2 weeks, a standard check would be 76 hours straight time & 8 hours overtime_ 1. Adheres to safe work practices, follows GMP's, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. 2. Attends and actively participates in daily shift huddles and handoffs. 3. Collect in-process and finished-product samples for analytical and microbiological quality checks. 4. Performs verifications of: Package coding, product weights, packaging integrity, labeling, temperature, sensory, etc. to verify compliance with customer and MFI's specifications and all others associated regulations for all products. 5. Assist in drafting, revision, and maintenance of plant standard operating procedures. 6. Act as a liaison between Production, Distribution, Sanitation, Maintenance, and the Quality Department by communicating quality issues, assisting in corrective action implementation where necessary. 7. Participate in plant food safety/quality inspections, in-process inspections, mock recall, label audits, HACCP audits. 8. Perform analytical testing including: Solids Content, pH, Vitamin C, Viscosity, Organoleptic, Hydrogen Peroxide Residual, and Packaging Integrity. 9. Verify proper set-up of production lines at start-up and shift change: Printer set-up (coding), packaging materials, labeling, quality limits, etc. Ensuring code date information is accurate and distributed to the production team. 10. Review sanitary condition of production lines prior to start-up by visual and mechanical inspection, performing ATP (adenosine triphosphate / verify surface cleanliness) and APC (Aerobic Plate Count / Verify absence of microbiological organisms). 11. Perform pH analysis of samples as part of root cause investigations. 12. Use inventory control software to ensure non-conforming product does not enter commerce. 13. Assist in investigations in response to customer concerns or other quality related deviations to determine root cause and appropriate corrective actions. 14. Assist in the management of quality hold activities, including non-conforming product inventories. 15. Ensure lab equipment, fridges and thermometer etc. are properly maintained and calibrated. 16. Lead and organize incubation sample collection and processing for investigations. 17. Maintain and follow MFI micro sample and shelf-life study programs. 18. Provide packaging integrity training to operations team. Demonstrate a willingness to learn and grow. 19. Team player who aligns and upholds our values: Teamwork, Accountability, Innovation and Continuous Improvement and passion for customer and consumers. 20. Attends and actively participates in safety meetings and trainings. 21. Train new hires as required. 22. Maintains regular and consistent attendance. 23. Fosters open communications and a good attitude toward work and fellow employees. 24. Perform other duties as assigned. **Qualifications** EDUCATION: · High school diploma or general education degree (GED) or equivalent REQUIRED EDUCATION, EXPERIENCE AND SKILLS: · Maintain a positive and engaging attitude towards colleagues at work. · Basic computer knowledge and skills PREFERRED EDUCATION, EXPERIENCE AND SKILLS: · One-year certificate from college or technical school or equivalent combination of education, training and/or experience. 1+ years of food manufacturing or quality assurance preferred · Experience with food manufacturing and GMPs. · Ability to work independently or in a group · Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate effectively with other employees. · Ability to calculate general mathematics. · Ability to apply common sense understanding to carry out instructions furnished in oral form. Ability to deal with problems involving one concrete variable in standardized situations. Post Holdings provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, status as a covered veteran and any other category protected under applicable federal, state, provincial and local laws. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Hourly Wage: **$24.65 - $28.15 per/hour** *The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums may be paid in amounts ranging from $0.35 per hour to $3.00 per hour in specific circumstances. Premiums may be based on schedule, facility, season, or specific work performed. Multiple premiums may apply if applicable criteria are met. Employment Type: **Full-Time** Available shifts: **Weekday - 1st** Location **Supply Chain Grocery #7012** 1400 OLD CHILLICOTHE RD SE, WASHINGTON COURT HOUSE, OH, 43160, US Job Overview Career opportunities in Administration and Clerical roles include Service Shop and Maintenance Clerk, Quality Assurance, System Operator. Administration roles such as Human Resource Clerk and Office Assistant. Benefits & perks At Walmart, we offer competitive pay as well as performance-based incentive awards and other great benefits for a happier mind, body, and wallet. Health benefits include medical, vision and dental coverage. Financial benefits include 401(k), stock purchase and company-paid life insurance. Paid time off benefits include parental leave, family care leave, bereavement, jury duty, and voting. Other benefits include short-term and long-term disability, company discounts, Military Leave Pay, adoption and surrogacy expense reimbursement, and more. You will also receive PTO and/or PPTO that can be used for vacation, sick leave, holidays, or other purposes. The amount you receive depends on your job classification and length of employment. It will meet or exceed the requirements of paid sick leave laws, where applicable. For information about PTO, see Smart Guide page (*********************************************************************** Live Better U is a Walmart-paid education benefit program for full-time and part-time associates in Walmart and Sam's Club facilities. Programs range from high school completion to bachelor's degrees, including English Language Learning and short-form certificates. Tuition, books, and fees are completely paid for by Walmart. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms. For information about benefits and eligibility, see One.Walmart.com. Walmart is committed to maintaining a drug-free workplace and has a no tolerance policy regarding the use of illegal drugs and alcohol on the job. This policy applies to all employees and aims to create a safe and productive work environment. Walmart, Inc. is an Equal Opportunity Employer- By Choice. We believe we are best equipped to help our associates, customers, and the communities we serve live better when we really know them. That means understanding, respecting, and valuing diversity- unique styles, experiences, identities, abilities, ideas and opinions- while being inclusive of all people.

Job Description: Quality Control & Receiving Associate The Quality Control & Receiving Associate is responsible for inspecting, verifying, and documenting incoming materials and finished goods to ensure compliance with company and customer specifications. This role plays a critical part in maintaining product quality, verifying supplier shipments, and supporting overall production efficiency in a secondary packaging manufacturing environment. What you'll do as a Quality Control & Receiving associate Receiving: Verify incoming shipments against purchase orders, packing slips, and invoices for accuracy in quantity, product type, and condition. Inspect raw materials, components, and packaging supplies for defects, damage, or non-conformance. Properly label and document received goods in the company's inventory system. Coordinate with purchasing and suppliers to resolve discrepancies, shortages, or damaged goods. Ensure materials are stored in compliance with safety, quality, and organizational standards. Quality Control: Perform in-process and final inspections of packaged products to verify compliance with quality standards and customer requirements. Check incoming materials (up to and including containers, labels, inserts, part numbers, etc.) for proper specifications, accuracy, and condition. Document inspection results, deviations, and corrective actions in accordance with company procedures. Work closely with production and purchasing teams to identify, communicate, and resolve quality issues in real time. Support corrective and preventive action processes (CAPA) for recurring or significant quality concerns. Assist with product testing, measurement, and verification using appropriate tools and equipment. General: Maintain accurate and organized records for audits, certifications, and traceability requirements. Follow all company safety, housekeeping, and compliance policies. Participate in training programs to stay current on quality and regulatory requirements. Support continuous improvement initiatives to enhance efficiency, quality, and customer satisfaction. What we're looking for Education & Experience: High school diploma or equivalent required; associate degree or technical certification in quality, manufacturing, or logistics preferred. Prior experience in quality control, receiving, or inventory management in a manufacturing environment (packaging experience a plus). Skills & Competencies: Strong attention to detail with the ability to identify defects and inconsistencies. Understanding of quality management systems and inspection tools, including calipers, Ability to read and interpret packing slips, purchase orders, and product specifications. Strong organizational skills with accurate record-keeping. Proficiency with Microsoft Office and ERP/inventory management systems preferred. Effective communication and problem-solving skills. Ability to work independently and collaboratively in a fast-paced production environment. Tool Reading Competencies Ability to read and interpret blueprints, and GD&T symbols Skilled in using calipers, micrometers, height gauges, and bore gauges Familiar with thread gauges, protractors, and alignment tools Accurate in documenting and reporting measurement results Physical Requirements: Ability to lift up to at least 50 lbs. Standing, walking, and moving materials throughout the shift. Manual dexterity and visual acuity to perform inspections. Job Type: Full-time

As the QC Shader Technician (Rotating Night Shift), you will perform the testing on various color panels and prep them for the evaluation for the color shaders for automotive paints. You will work onsite full time in Cleveland, OH reporting to a Shift Supervisor. PPG offers excellent Medical, Dental, & Vision Benefits; 401k retirement savings; and Paid Vacation, Holiday pay. Main Responsibilities: Data entry into color portal and quality database Customer communication Prepare pre-ship samples for customers Use color measurement instruments and software to ensure accurate color shading Facilitate batch approval process Other duties as assigned and needed Qualifications: High School Diploma or GED is required Must be able to use color measurement instruments and software for color analysis and shading About us: Here at PPG we make it happen, and we seek candidates of the highest integrity and professionalism who share our values, with the commitment and drive to strive today to do better than yesterday - everyday. PPG: WE PROTECT AND BEAUTIFY THE WORLD™ Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. To learn more, visit *********** and follow @ PPG on Twitter. The PPG Way Every single day at PPG: We partner with customers to create mutual value. We are "One PPG" to the world. We trust our people every day, in every way. We make it happen. We run it like we own it. We do better today than yesterday - everyday. PPG provides equal opportunity to all candidates and employees. We offer an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, color, creed, religion, national origin, age, disability status, marital status, veteran status, sexual orientation, gender identity or expression. If you need assistance to complete your application due to a disability, please email ******************. PPG values your feedback on our recruiting process. We encourage you to visit Glassdoor.com and provide feedback on the process, so that we can do better today than yesterday. Benefits will be discussed with you by your recruiter during the hiring process. #LI-Onsite The base salary range for this position is $40,000 to $43,000. PPG pay ranges and benefits can vary by location which allows us to compensate employees competitively in different geographic markets. PPG considers several factors in making compensation decisions including, but not limited to, skill sets, experience and training, qualifications and education, licensure and certifications, and other organizational needs. Other incentives may apply. Our employee benefits programs are designed to support the health and well-being of our employees. Any insurance coverages and benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents.

The Lab Engineer (Intern) plays a crucial role in advancing ANS's geotechnical engineering initiatives by conducting soil testing within our in-house geotechnical lab. This role primarily encompasses sample preparation, the execution of tests following established standards, and routine workstation maintenance. The intern is expected to play a key role in contributing to the success of our geotechnical projects through attention to detail and adherence to industry-established testing protocols. We are looking for a lab intern ideally graduating by Fall 2025 or Spring 2026. This role offers a hands-on experience in a collaborative lab environment. Candidates who express interest in staying in the geotechnical field and are a strong cultural fit may be considered for a full-time offer after graduation. RESPONSIBILITIES Sample Preparation: Diligently process and prepare soil and rock samples for testing upon receipt at the laboratory. Testing: Perform a variety of geotechnical tests in adherence to established ASTM or AASHTO protocols. Workstation Maintenance: Perform routine maintenance and cleaning procedures including washing reusable laboratory equipment. Data Recording: Maintain comprehensive documentation of test procedures, observations, and results, prioritizing data accuracy and integrity for subsequent analysis. Safety Compliance: Commit to adherence to safety protocols and guidelines, actively fostering a secure work environment and minimizing risks related to laboratory operations. Multi-tasking: Proficient in managing multiple tasks simultaneously. Non-Testing Duties: Other duties as assigned for day-to-day laboratory operations, including but not limited to packaging and shipping field equipment, ordering and restocking lab supplies, and coordinating the disposal of soils GENERAL REQUIREMENTS Education: Applicants should be pursuing a degree in geology, civil engineering, environmental sciences, materials sciences, or a related field. Physical Fitness: Refer to the detailed physical requirements outlined below. In-Person Position: This is an in-person position that requires candidates to be present at the lab for effective contribution. Remote work is not applicable. Attention to Detail: Strong attention to detail is essential to ensuring precision in sample preparation and test procedures. Safety Awareness: Comprehensive understanding and strict adherence to safety protocols are a must. Communication: Effective communication skills are needed to facilitate collaboration with team members and record or report findings. Laboratory Experience: Having prior experience in a laboratory setting, particularly in Geotechnical or material testing is advantageous. PHYSICAL REQUIREMENTS Prolonged periods (6-8 hours) of walking and standing are applicable for this position. Regularly lift, move, push, and pull heavy weights (25 to 50 lbs.) throughout the shift. Should be able to handle such tasks independently or with minimal assistance. Frequent kneeling and squatting INTERNSHIP DURATIONThe internship is initially set for a four-month period, with the possibility of periodic (multiple) extensions based on the candidate's performance and overall development. Schedule:8 hour shift Choose your own hours Monday to FridayWeekends as needed

State Bank, a growing Community Bank, has an opportunity for a self-motivated and detail-oriented individual to join our Quality Control Team. We are seeking a Full Time Mortgage Quality Control Analyst to work in our Defiance corporate office. This position is responsible for establishing advanced quality controls and implementing continuous improvement standards and procedures for State Bank, including ensuring that mortgage HMDA data is correct and compliant. State Bank offers an extensive benefits package including: competitive compensation, paid vacation and PTO, medical/dental/vision insurance, company-paid life and AD&D insurance, a company-matched 401(k) retirement plan, company-provided short and long-term disability, quarterly incentive payouts, a community volunteer program, and growth opportunities. Apply today and see why State Bank is a great place to work! Equal Opportunity Employer

System One is seeking a NDE Quality Oversight professional for a long-term contract to hire, full time opportunity, onsite in Orville, Ohio. The ideal candidate will have a strong background in nuclear quality assurance, NDE, and fabrication operations, with a deep understanding of NQA-1 and ASME standards. This role will focus on ensuring quality through oversight, auditing, and compliance within a nuclear fabrication environment. Responsibilities: + Provide quality assurance oversight of NDE (Non-Destructive Testing) and fabrication operations. + Ensure compliance with NQA-1, ASME, and other nuclear quality standards. + Conduct audits to maintain quality program integrity. + Review and approve procedures, ensuring alignment with applicable standards. + Generate and review final quality packages for completeness and accuracy. + Collaborate with teams to identify and resolve quality issues. Qualifications: + Required Experience: + Hands-on expertise in nuclear quality programs, including NQA-1 and ASME standards. + Proficiency in NDE techniques and fabrication processes. + Experience in auditing, procedure review, and final package generation. + Must be local to Orrville, OH or willing to commute (no per diem provided). + Strong communication and organizational skills. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #161-Managed Staffing Charlotte System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Summary/Objective The Quality Control Associate is responsible for the day-to-day functionality of inspecting picked orders for accuracy. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Department Duties - Review picked orders for accuracy and that all stated requirements for the order are met. - Receive, identify, mark and place materials sent to the warehouse according to established procedures. - Prepare various merchandise for delivery; prepare packages for shipping according to established procedures. - Communicate with various personnel, departments, product managers and others to provide and receive information, resolve questions and issues, and coordinate activities. - Maintain work time records per company policy. - Operate a computer to process reports and forms and maintain an inventory of warehouse materials as required. - Assist team to help ensure the facility is maintained in a safe, clean and orderly condition. Competencies - Good organization skills and basic warehouse understanding of picking, shipping, receiving, issuing materials, proper and orderly storage, optimum space utilization and/or stock inventory procedures. - Ability to clearly read/listen and understand work instructions. - Ability to work well in time-sensitive situations. - Basic knowledge of Microsoft Excel - Team-oriented operating style with effective interpersonal skills that allow successful interactions with individuals of a variety of work styles, personalities, and career levels. Requirements Work Environment Warehouse Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. - Ability to move and handle merchandise weighing 1 ounce - 50 pounds - Ability to stand, bend and stoop for an extended period of time Education and Experience Preferred: - At least one (1) year of prior job-related experience in a Quality Control environment - High School diploma or equivalent education Position Type/Expected Hours of Work - Monday through Friday, 40 hours per week with possible overtime Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the associate for this job. Duties, responsibilities and activities may change at any time with or without notice. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the company. EEO Statement Wild Republic is an Equal Opportunity Employer. Applicants for employment, recruitment, hiring, training, transfer, promotion, pay, benefits, lay-off, demotion or termination of employment will be made without consideration of race, color, religion, sex, sexual orientation or preference, gender identity, national origin, age, disability, military status, ancestry, veteran status, or any other protected classification under applicable federal, state or local law.

Job Description Join our team at ER Autocare in Columbus, OH as a Full Time Lot Technician / Quality Control Technician! This position is not just a job, but an opportunity to be part of a dynamic team in the auto repair industry. You'll have the chance to work onsite and ensure that our customers' vehicles are in top-notch condition before they hit the road. Your attention to detail and dedication to quality will make a real difference, all while being surrounded by a fun and energetic company culture. If you're looking to be part of a high-performance team that values excellence and integrity, this role is perfect for you. Don't miss out on this exciting opportunity - apply today! You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Competitive Salary, and Paid Time Off. Let us introduce ourselves We are a busy automotive repair company with 4 locations around Columbus, Ohio. We provide an upscale auto repair experience and we are "Masters Of Our Craft". Your day as a Lot Technician / Quality Control Technician As a Lot Technician/Quality Control Technician at ER Autocare in Columbus, OH, your primary responsibility will be to guarantee a top-notch customer experience by conducting thorough Quality Control Inspections and Mini-Cleans on vehicles post-repair or service. Additionally, you'll play a crucial role in maintaining the cleanliness and organization of the shop, including stocking supplies, ensuring shop floors are debris-free, and keeping the exterior grounds clean. Your attention to detail and commitment to cleanliness will directly impact the overall customer satisfaction. In addition to these primary duties, you may also have the opportunity to assist with driving company vehicles for parts pick-ups and customer shuttles, support the Rental Car fleet, and perform tire repairs and installations. This role offers a dynamic mix of responsibilities in a fast-paced and customer-focused environment. What matters most To excel as a Lot Technician/Quality Control Technician at ER Autocare in Columbus, OH, you must possess a positive attitude, a sense of urgency, and reliability in your work. A clean driving record and the ability to operate a manual transmission vehicle are essential for this role, as driving company vehicles may be required. Enjoying the cleaning and maintenance of cars and facilities is crucial, as you will be responsible for keeping the shop and grounds pristine. A basic knowledge of automotive operations is beneficial, allowing you to understand the vehicles you'll be working with. Overall, a combination of a strong work ethic, attention to detail, and a willingness to learn and adapt in a fast-paced environment will set you up for success in this position. Knowledge and skills required for the position are: You must have a good attitude Be fast-paced Dependable and punctual. A clean driving record and being able to drive a car with a manual transmission is required. You must enjoy cleaning cars & buildings! A basic understanding of how a car works Are you ready for an exciting opportunity? If this sounds like the right job for you, don't wait - apply today to join our team. We look forward to hearing from you!

Location: Indianapolis, IN or Mason, OH. This role requires associates to be in-office 1 - 2 days per week, fostering collaboration and connectivity, while providing flexibility to support productivity and work-life balance. This approach combines structured office engagement with the autonomy of virtual work, promoting a dynamic and adaptable workplace. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. An RCA Intern will be responsible for supporting our Risk, Controls, and Assurance team in ensuring the stability and compliance of internal controls over financial reporting and audit/regulatory compliance obligations. Key regulations and standards supported by these efforts include Generally Accepted Accounting Principles (GAAP), Sarbanes-Oxley (SOX), statutory Model Audit Rule (MAR), and System and Organization Controls 1 (SOC1) reporting. This internship will be a full-time (40 hours/week) program that will run for 8-11 months with two cohorts, one starting in January 2026 and the other May 2026. How you will make an impact: * Create and document results of control testing and review. * Provide research support, develop work programs, engagement plans and collaborate with audit team members. * Assess risk of financial processes, operational processes, and the supporting IT systems. * Document business processes dependent on financial data systems. * Analyze results of specific or general work requests. * Having direct contact with external audit firms for purposes of audit planning and remediation * Opportunity to do innovative work that means more to you and those we serve * Create greater care for our members, greater value for our customers, and greater health for our communities Minimum Requirements: * The ability to work 40 hours per week for the duration of the internship and work in-office at least once per week. * Actively pursuing a Bachelor's or Master's degree in either: Accounting, Finance, Business Information Systems, Management Information Systems, or a related program (MSA, MBA, MSIS, etc). Preferred Skills, Capabilities, and Experiences: * Excellent Problem-solving, Analytical, and Organizational skills * Excellent written and verbal communication skills * Excellent organization and time management skills * Ability to work in a team-based team environment * Skilled in Microsoft Office Suite with emphasis on Excel, Word, and Access * Excellent Communication skills, both written and oral * Excellent Problem-solving, Analytical, and Organizational skills * Excellent Public Speaking and Presentation skills Job Level: Non-Management Non-Exempt Job Family: ADM > Intern Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Job DescriptionSample Kit Processing Technician Department: Laboratory Analytical Services Status: Full Time (Non-Exempt) Join a company where people come first. At Good Place Holdings, we believe organizations thrive when people thrive. As part of our commitment to being a “Good Place,” we value people over profit, foster meaningful relationships, and pursue work that builds up our communities. Our Laboratory Analytical Services (LAS) team plays a vital role in supporting reliable, low-cost electric systems to customers nationwide. We are looking for a Sample Kit Processing Technician 2nd Shift who wants to contribute to meaningful work, support our mission, and grow within a caring, values-driven environment. What You'll Do In this hands-on role, you will help our LAS operations keep pace with customer and field technician demands by preparing and maintaining sample kits. Your work ensures that insulating liquid samples can be processed effectively, accurately, and on time. Daily responsibilities include: Cleaning and preparing syringes: banding components, running the dishwasher, transferring to the drying oven, and reassembling for barcoding Scanning and producing barcodes for syringe cards and boxes Preparing bottles of various sizes with proper barcodes Opening, barcoding, shrink-wrapping, and inventorying non-barcoded syringes Breaking down boxes and separating cardboard from trash Sweeping and mopping laboratory floors twice a week following safety protocols Assisting with other tasks as needed to support lab operations What We're Looking For Education & Experience: High school diploma or equivalent Knowledge, Skills & Abilities: Willingness to learn and consistently apply: PCB handling and storage regulations Proper disposal procedures Chemical hygiene practices General laboratory and safety protocols Operation of cleaning equipment Strong attention to detail and ability to follow step-by-step processes Reliability, good communication, and the ability to work independently or with a small team Work Environment Indoor laboratory setting within an industrial-style facility (PPE provided; not a clean room) Possible exposure to non-toxic dust, fumes, noise, and occasional handling of regulated materials Supportive team environment with a focus on safety and Good Place values Physical Requirements Frequently standing, walking, bending, kneeling, and crouching Ability to work at a workstation for extended periods Ability to lift up to 50 lbs Good hand strength for operating syringes. Work 2nd shift, 3:30pm to 11:30pm. 8hour shifts. Regular use of vision, hearing, and verbal communication Why Join Us? Be part of a company that genuinely values its people Work with a team focused on helping customers maintain safe and reliable electrical systems Contribute to meaningful work that supports communities and fosters growth Opportunities to learn new skills and grow in an encouraging environment Ready to join a Good Place? Apply today!

Job DescriptionJob Title: Logistics Quality Control (QC) Specialist Department: Logistics Reports To: Logistics Manager / Quality Manager Type: Full-Time The Logistics Quality Control (QC) Specialist is responsible for ensuring all packaged cannabis products meet internal quality standards and Ohio regulatory requirements before being released to the vault as finished goods and prior to outbound distribution. This role serves as a critical control point between Packaging, Inventory, and Logistics, verifying product accuracy, compliance, and documentation integrity. The ideal candidate is highly detail-oriented, self-motivated, and capable of working independently in a fast-paced, regulated environment. Key ResponsibilitiesFinished Goods & Lot Quality Control ● Perform detailed QC inspections on all packaged lots received from the Packaging Department prior to vault intake. ● Verify lot integrity, SKU accuracy, unit counts, weights, packaging configuration, heat/tamper seal and labeling compliance. ● Ensure all required regulatory information is present and accurate, including: License numbers Batch/lot numbers Harvest and packaging dates Net weight Required warning statements ● Confirm packaging meets internal quality standards and is free of defects, damage, or contamination. ● Accurately document QC approvals, rejections, and findings per SOP requirements. Order Quality Control & Fulfillment Verification ● Conduct final QC checks on all outbound orders prior to shipment or delivery. ● Verify each order is 100% accurate, including: Correct SKUs and product types Correct lot numbers Correct quantities and unit configurations Matching manifest and sales order documentation ● Ensure orders comply with Ohio cannabis transportation and distribution regulations. ● Identify, escalate, and document discrepancies before orders leave the facility. Compliance & Documentation ● Maintain accurate and complete QC records in accordance with Ohio Division of Cannabis Control (DCC) regulations. ● Ensure inventory movements and lot releases are accurately reflected in the state seed-to-sale tracking system. ● Adhere strictly to GMP, SOPs, and internal quality policies. ● Support audits and inspections by providing documentation and traceability records when requested. Cross-Functional Communication ● Communicate QC findings clearly and professionally with Packaging, Inventory, Logistics, and Management teams. ● Escalate quality or compliance risks immediately and participate in root cause analysis as needed. Support continuous improvement initiatives by identifying trends or recurring issues. Required Qualifications ● Previous experience in quality control, logistics, inventory, or regulated manufacturing preferred. ● Strong attention to detail with the ability to spot discrepancies quickly and accurately. ● Ability to work independently with minimal supervision. ● Strong organizational and documentation skills. ● Comfortable working in a highly regulated environment with strict compliance standards. ● Ability to stand, walk, and handle packaged products throughout the shift. Preferred Qualifications ● Experience in the cannabis industry, particularly in packaging, inventory, logistics, or QC. ● Familiarity with Ohio cannabis regulations and seed-to-sale tracking systems. ● GMP or quality systems experience. ● Experience performing lot and order audits in a warehouse or distribution environment. Core Competencies ● Exceptional attention to detail ● Independent decision-making ● Regulatory compliance mindset ● Clear written and verbal communication ● Integrity and accountability Powered by JazzHR n1JebPyvvy

This job posting is for a position in a restaurant owned and operated by an independent franchisee and not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. If you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired. Description: McDonald's Works for Me. I'm going places. I want a satisfying career with good benefits and great opportunities for advancement. I have a lot to offer and I want to grow. The Job for Me - Get a job that inspires your best and moves you forward. Choose your hours. Pursue your education. Build your skills and be yourself. The Team for Me - Our people want to say YES - to working with energy and purpose, finding new talent, providing coaching and direction, honing their leadership skills, and helping to run a business that serves up delicious food and feel-good moments. Does this sound like you? You'll fit right in. The Company for Me - From here, you can go further than you thought possible. Reach your goals and build your future with college tuition assistance, valuable job training, and retirement benefits. Let's talk. Make your move. Requirements: The Maintenance Person assists management in achieving and maintaining outstanding interior and exterior restaurant cleanliness and maintaining restaurant equipment. As a member of the Maintenance Team, your restaurant will support you with the tools and training needed to succeed. The Maintenance Person's responsibilities may include, but are not limited to: -Filtering oil fryers daily -Maintaining outside grounds -Clean equipment, inside and outside windows, stock rooms and restrooms -Unload delivery truck 2 times a week -Take out and empty trash compactor -Change light bulbs -Clean HVAC/Exhaust units and roof of debris Additional Info: Along with competitive pay, a Maintenance Person eligible for incredible benefits including: + Flexible scheduling + Education through Archways to Opportunity including opportunities to earn a High School degree, college tuition assistance and English classes as a second language + competitive wages -Medical, dental and vision coverage if full time -Short- and Long-Term Disability, voluntary life This job posting contains some information about what it is like to work in a McDonald's restaurant, but it is not a complete job description. People who work in a McDonald's restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job. By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald's USA. I understand that this franchisee is a separate company and a separate employer from McDonald's USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald's USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices. Requsition ID: PDX_MC_2DDEB4A5-FA7C-4E8D-B5A3-8853DED4742D_6417 McDonald's provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to sex, sex stereotyping, pregnancy (including pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), race, color, religion, ancestry or national origin, age, disability status, medical condition, marital status, sexual orientation, gender, gender identity, gender expression, transgender status, protected military or veteran status, citizenship status, genetic information, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Nothing in this job posting or description should be construed as an offer or guarantee of employment.

Environmental Enterprises, Inc. is a specialty environmental management and disposal company. We are dedicated to protecting the environment by providing quality environmental services, recycling options, and waste disposal at competitive rates through innovative technologies and superior technical support. We are currently looking to fill the challenging and rewarding position of Chemical Treatment Technician. We are seeking dependable individuals with strong work ethic, willingness to learn and take initiative. Full time benefits include: Excellent health coverage, dental, vision, life and disability insurance Paid vacation & sick time Six paid holidays 4o1(k) match Paid company provided training. First shift Monday-Friday, competitive pay at a stable company! PRIMARY TASKS : Load, unload, process hazardous and nonhazardous chemical waste materials at a permitted waste treatment facility independently or with supervision. PHYSICAL DEMANDS (non-inclusive): This position is physical in nature and requires: walking, standing, climbing, bending, reaching, lifting (up to 70 pounds), carrying, pushing/pulling, and twisting. This position involves working with and around chemicals & environmental contaminants. Work is performed in outdoor and indoor environments and workers are subject to heat and cold while donning required PPE. At times, the technician may be required to wear a respirator, supplied air and full protective suit. DETAILS OF ASSIGNMENT : Processing of hazardous chemical waste safely in accordance with company procedures and EPA, DOT and OSHA regulations Moving drums, including safe operation of a fork truck Utilize barcode system to Review laboratory data to determine proper handling and disposal of materials Responsible for keeping operating areas, walls, pipes and floor in a clean and safe condition Perform chemical compatibility checks to prevent reactions and other issues Performs work in a safe manner, following all safety procedures QUALIFICATIONS: High school diploma or equivalent One year applicable experience 24 or 40 Hour Hazwoper certificate preferred Be able to communicate clearly, both verbally and in writing Environmental Enterprises Incorporated is an Equal Opportunity Employer M/F/Disabled/Vets

BEL GEO is hiring motivated, interns for our Construction Material Testing (CMT) department. As a QC/QA Field Technician, you'll conduct quality control and assurance tests on construction materials like soil, concrete, asphalt, and aggregates. This role ensures all work meets project specifications and industry standards. The work is mostly outdoors on active construction sites, with a mix of fieldwork (75%) and lab/office duties (25%). We provide a month of training and mentorship before you begin independent work. This internship is a great opportunity to gain practical experience in the geotech field. With additional experience and education, you could advance to a Senior Field Technician or Project Engineer. This role offers the possibility of a full-time job after the internship ends.

Location: Lebanon, OH Employment Type: 3rd Shift, Full-time, direct hire Job Brief MBS Pro Staffing, a division of Kable Workforce Solutions, is hiring a Quality Control Technician for our client. Responsibilities include setting up and programming metrology equipment, conducting first article and production inspections, verifying parts to specs, maintaining and calibrating tools, troubleshooting equipment, and reporting results using Excel. Candidates should have 3-5 years of CMM programming experience. What's a Typical Day Like? Develop and implement methods and procedures for inspection, testing, and evaluation by creating gauging systems or adapting existing inspection equipment. Conduct thorough inspections of various tools, gauges, fixtures, and components, including complex and intricate parts, to assess workmanship accuracy and functional performance. Set up, program and utilize various precision measuring devices and instruments for meticulous checking and adjustment of tools and gauges. Determine appropriate inspection methods and program when warranted, perform complex setups, and conduct first article inspections to ensure product quality. Program when warranted, operate the CMM to inspect first articles, regular production components, and reworked machined items, receiving inspections ensuring adherence to quality standards. Verify finished products against internal and customer specifications, ensuring compliance with technical drawings and requirements. Assist engineering teams with CMM programing and CMM program editing, to accommodate specific engineering needs. Perform periodic maintenance and calibration of metrology equipment. Troubleshoot issues with testing equipment and ensure proper functioning for ongoing quality assurance activities. Operate testing devices following prescribed sequences, accurately recording test data, via Microsoft Office (mainly Excel) and identifying deviations from expected results. Prepare detailed & accurate reports on test outcomes for management review, via Microsoft Office (mainly Excel), providing actionable recommendations regarding product performance, malfunctions, or failures. Provide training to new and existing team members on inspection techniques, equipment programming, quality standards, and best practices, fostering a knowledgeable workforce. What Are the Requirements of the Job? Associate degree (A.A.) from an accredited technical college or equivalent; or a combination of education and experience 3-5 years of experience At least 3 to 5 years CMM programming experience Experience with Mitutoyo CMM's & MCOSMOS (Preferred) Experience with contracers & contrace software Able to perform surface plate manual measurements, hand gages, layout fixtures. Proficient in Microsoft Office with an emphasis on Excel. Proficient in General Dimension & Tolerance Proficient in reading and interpreting technical documents, including safety guidelines, operational instructions, and procedure manuals. Strong mathematical skills, with the ability to perform calculations involving rates, ratios, percentages, and various measurements. Capable of identifying problems, collecting relevant data, and drawing logical conclusions. Ability to follow complex instructions in written, oral, or diagram form. Excellent communication skills, both written and verbal, with the ability to convey technical information effectively to diverse audiences. Proven ability to work collaboratively within a team environment, fostering cooperation and support among colleagues. Familiarity with statistical process control (SPC) and data analysis software is preferred. Experience with inspection equipment and the ability to work from complex blueprints, schematics, and inspection specifications. The role requires regular standing, walking, and using hands to manipulate tools and equipment. Candidates must be able to climb, balance, stoop, kneel, crouch, and reach for materials as needed. Vision abilities necessary for mechanical inspections include distance vision, peripheral vision, depth perception, and the ability to adjust focus. Employees will work in proximity to moving mechanical parts and may encounter wet conditions or elevated spaces. Exposure to fumes, airborne particles, toxic or caustic chemicals, and the risk of electric shock is possible when working near electro-mechanical equipment. The noise level can range from moderate to loud. Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Location: Solon, OH | Job Type: Full-Time | Competitive Pay & Benefits We are seeking a Quality Control Associate with at least two years of experience in electronics manufacturing to help maintain high-quality standards. In this role, you'll inspect products, ensure they meet industry and safety requirements, and assist with compliance reporting. If you have a keen eye for detail and enjoy working in a fast-paced environment, we'd love to hear from you. Key Responsibilities: Conduct in-process and final product inspections Implement and maintain ISO 9001-2015 quality control processes Identify and document non-conformance issues, initiating corrective actions Ensure compliance reporting for REACH, RoHS, PPAP, Conflict Minerals, and FMEA Maintain detailed quality records and support process improvements Qualifications: 2+ years of QC experience in electronics manufacturing Strong knowledge of ISO 9001, IPC-610, and J-STD-001 Experience with product compliance reporting Proficiency in Microsoft Office and quality management software Excellent attention to detail and problem-solving skills Apply Today!Submit your resume to join a growing team and advance your career in quality control. EverStaff offers employees Medical, Dental, Vision, Accident, Life, Disability and Cancer insurance coverage. All qualified applicants will receive consideration for employment without regard to race, color, religion, ethnicity, national origin, sex, gender identity, sexual orientation, disability status, protected veteran status or any other protected status under the law. EverStaff is an equal opportunity employer (M/F/D/V/SO/GI)

New PERMANENT Lab Assistant, Chemistry position at a beautiful, highly-rated facility in the state of OH! Permanent, full time position Excellent pay and full benefits Requirements: Background in laboratory work Impressive work ethic and ability to work in an efficient manner Desire to succeed and be employed at a top healthcare facility -- Shift: many different schedules available! Inquire for more details. Pay rate: Very competitive. Specific salary to be determined after interview This is a permanent, full-time position with great pay and FULL BENEFITS. Click APPLY today. If you are interested in learning more about this job, or if you are a healthcare professional looking for a new position in any capacity, contact Marina - call/text 617-430-7080 or email your resume to marina@ka-recruiting.com Or book a 5 minute phone call here: https://calendly.com/marinaka/job-opportunity-information-meeting