Quality control technician jobs in Alafaya, FL

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Must be able to climb and lift up to 50lbs. Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

Job Title: Quality TechnicianJob Description Work directly with the engineering team to develop new operation processes and operate various machines to produce quality parts as instructed. Ensure all operations adhere to company procedures and safety standards, contributing to a clean and efficient work environment. Responsibilities * Operate Electrical Discharge Machine (EDM), waterjet, air flow, and laser machines to produce quality parts as instructed by Operation Process Sheets. * Work with tools such as drill press, belt sander, orbital sander, swivel deburr, bench grinder, and other hand tools according to instructions. * Utilize inspection equipment to ensure product quality. * Complete documentation accurately and correctly scan on/off shop orders. * Utilize and understand operation process sheets and inspect parts per character control sheets. * Notify Supervisor immediately in case of damage, defect, or inability to proceed efficiently. * Collaborate effectively with team members and other departments as needed. * Use approved software and follow company processes and procedures. * Perform all tasks in a safe and reasonable manner according to the company's Employee Handbook. * Maintain a clean and safe work environment and contribute to the company's 6S program and Lean concepts. * Comply with all quality policies, specifications, regulations, and instructions. Essential Skills * Experience with EDM, fusion, and laser machines, with fiber optic laser experience being a plus. * Fusion hole drilling experience. * Ability to work independently or as part of a team. * Strong focus and attention to detail. * Proficiency in mid-level math skills, including working with whole numbers, fractions, and decimals. * Proficiency in using inspection equipment like calipers, micrometers, gage pins, and height gages. * Ability to read blueprints. * Ability to read and follow company processes, policies, and procedures. Additional Skills & Qualifications * Experience with fiber optic laser technology is desirable. Work Environment The role operates in a manufacturing, fabrication, and welding tooling shop environment. The position is for the 2nd shift from 3:30 PM to 12:30 AM, Monday to Friday. The engineering team works from cubicles off of the large, clean, indoor machine shop. Clients are primarily in the aviation and aerospace sectors, focusing on tooling and fabrication of parts. The company promotes a small, family-oriented environment with a team-first mindset. Job Type & Location This is a Permanent position based out of Palm Bay, FL. Pay and Benefits The pay range for this position is $60000.00 - $72000.00/yr. health/dental/vision insurance, 401(k) with company match, life/disability insurance, paid time off (PTO), tuition reimbursement, and wellness programs like counseling/dietitian access Workplace Type This is a fully onsite position in Palm Bay,FL. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

The County Materials Family of Companies manufactures and delivers concrete construction products to meet the demand for growing communities. We rely on our talented and dedicated team members to provide reliable products with personalized service. We are seeking a Quality Control Technician for County Materials in Astatula, Florida Job Duties: * Performs quality control inspections, checks, and tests during the manufacture of products * Inspects materials, parts and products at different stages of production * Records observations and may make recommendations for improving processes * Familiar with standard concepts, practices, and procedures within the concrete industry * Regularly observes the production process including setup, casting, stripping and storage of product. * Work with production to identify and resolve quality issues related to casting and concrete performance. * Manage housekeeping to ensure a safe workplace. * Other tasks as needed Work Environment: * Work in indoor and outdoor weather conditions, including extreme hot or cold temperatures * Work near moving machinery and equipment - could include electrical hazards * Work in a noisy environment Physical Requirements: * Carrying/Lifting 10 - 40 Pounds frequently * Carrying/Lifting > 40 Pounds occasionally * Standing / Walking / Climbing * Squatting/Crouching/Kneeling/Bending * Pushing / Pulling / Reaching Above Shoulder Experience & Qualifications: * Understanding of a manufacturing environment. * Concrete plant and/or quality control experience highly desired. * Ability to interpret shop drawings and job specifications. * Proficient Computer Skills with Microsoft Office. * Solid math aptitude. * Must have the ability to train and obtain technical certifications as directed and supported by the company. * Ability to work independently. * Strong organizational, interpersonal and communication skills. * High School diploma or equivalency required. * 1-2 years prior experience in a manufacturing environment * Experience in the construction and/or building materials industry preferred, not required.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

Titan Florida is a wholly owned subsidiary of Titan America LLC, a leading environmentally and socially progressive heavy building materials company located in the eastern United States. Titan America is part of the TITAN Group, an independent, multi-regional producer of cement and other related building materials. Our products include cement, aggregate, ready-mixed concrete, and fly ash beneficiation. TITAN Group has a record of continuous growth since its establishment in 1902. It has expanded its production and distribution operations into 13 countries, employing more than 5,500 people. Our products protect human life and personal property, improve the quality of life, generate economic prosperity, and connect society. We are seeking a Concrete Quality Control Technician in the Melbourne/Cocoa area, Florida. This salaried non-exempt position reports directly to the Quality Supervisor. The primary functions of this position are to ensure high quality ready-mix product and provide industry related technical assessments. Responsibilities Responsibilities: Perform sample testing and monitoring of our concrete production and procedures for the region. Observe job site testing and perform comparative testing with independent testing agencies. Communicate with customers, testing laboratories, and dispatch and plant supervisors regarding mix utilization and admixture dosage rates. Perform plant inspections of our facilities and recommend corrective action to ensure compliance with project specifications, VDOT, Federal specifications and Titan America's QA guidelines. Perform visual inspection assessments of jobsite conditions, solutions, and recommendations to correct problems if they occur. Monitor test report data and plant records to help determine specification compliance in accordance with project, Federal and State specifications. Perform all pertinent ASTM, ACI and FDOT testing procedures and evaluations. Supports Sales and Production departments in resolving quality-based customer queries and complaints. Participates in the analysis of customer claims and supports the investigation of the causes linked to process or production conditions. Qualifications FDOT Plant, ACI Field Testing, Aggregate, and Lab Technician Certifications preferred or able to obtain within the first six months of hire. Minimum one-year experience in Ready Mix Concrete, quality control, or related industry. H.S. Diploma or equivalent required, college degree preferred. Must have excellent interpersonal, verbal, and written communication skills. Must be computer literate in Windows, Excel, Adobe, and MS Office. Knowledge of other software programs and computer functionality a plus. Ability to work flexible shifts including nights, weekends, and overtime. Excellent data entry skills and ability to multi-task under pressure. Titan Florida is an Equal Employment Opportunity (EEO) / Affirmative Action employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status.

Titan Florida is a wholly owned subsidiary of Titan America LLC, a leading environmentally and socially progressive heavy building materials company located in the eastern United States. Titan America is part of the TITAN Group, an independent, multi-regional producer of cement and other related building materials. Our products include cement, aggregate, ready-mixed concrete, and fly ash beneficiation. TITAN Group has a record of continuous growth since its establishment in 1902. It has expanded its production and distribution operations into 13 countries, employing more than 5,500 people. Our products protect human life and personal property, improve the quality of life, generate economic prosperity, and connect society. We are seeking a Concrete Quality Control Technician in the Melbourne/Cocoa area, Florida. This salaried non-exempt position reports directly to the Quality Supervisor. The primary functions of this position are to ensure high quality ready-mix product and provide industry related technical assessments. Responsibilities Responsibilities: * Perform sample testing and monitoring of our concrete production and procedures for the region. * Observe job site testing and perform comparative testing with independent testing agencies. * Communicate with customers, testing laboratories, and dispatch and plant supervisors regarding mix utilization and admixture dosage rates. * Perform plant inspections of our facilities and recommend corrective action to ensure compliance with project specifications, VDOT, Federal specifications and Titan America's QA guidelines. * Perform visual inspection assessments of jobsite conditions, solutions, and recommendations to correct problems if they occur. * Monitor test report data and plant records to help determine specification compliance in accordance with project, Federal and State specifications. * Perform all pertinent ASTM, ACI and FDOT testing procedures and evaluations. * Supports Sales and Production departments in resolving quality-based customer queries and complaints. * Participates in the analysis of customer claims and supports the investigation of the causes linked to process or production conditions. Qualifications * FDOT Plant, ACI Field Testing, Aggregate, and Lab Technician Certifications preferred or able to obtain within the first six months of hire. * Minimum one-year experience in Ready Mix Concrete, quality control, or related industry. * H.S. Diploma or equivalent required, college degree preferred. * Must have excellent interpersonal, verbal, and written communication skills. * Must be computer literate in Windows, Excel, Adobe, and MS Office. Knowledge of other software programs and computer functionality a plus. * Ability to work flexible shifts including nights, weekends, and overtime. * Excellent data entry skills and ability to multi-task under pressure. Titan Florida is an Equal Employment Opportunity (EEO) / Affirmative Action employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status.

Title: Production Technician Pay Rate: $15 Job Type: Full Time/Part Time | Non-Exempt Shift: Monday- Friday, 7:00 am - 3:30 pm Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: * Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards * Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively * Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging * Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready * Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: * You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership * You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment * You can comfortably perform repetitive tasks with focus and consistency over extended periods * You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment * You have a high school diploma, GED, or equivalent Even Better If: * You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements * Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) * Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance * Frequent and repetitive use of hands and wrists for extended periods of time * Repetitive bending, squatting, and reaching * Ability to climb ladders or step stools to access plants or equipment * Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions * Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) * Exposure to soil, water, fertilizer, dust, pollen and plant pathogens * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels

Benefits: Competitive salary Dental insurance Health insurance Paid time off Vision insurance We are seeking a detail-oriented and experienced HVAC Quality Control Technician to ensure that heating, ventilation, and air conditioning systems meet project specifications, industry standards, and safety regulations. The ideal candidate will be responsible for inspecting HVAC installations, identifying deficiencies, and supporting the project team in delivering high-quality workmanship. Key Responsibilities: Conduct on-site inspections of HVAC installations, including ductwork, piping, equipment, and controls. Verify compliance with mechanical drawings, specifications, codes, and standards (e.g., ASHRAE, SMACNA). Monitor and document all phases of the HVAC installation process to ensure quality and safety. Perform functional tests and commissioning of HVAC systems to verify performance. Generate detailed QC reports, punch lists, and non-conformance notices. Collaborate with project managers, field technicians, and subcontractors to resolve issues. Review installation checklists and ensure accurate completion of documentation. Support internal audits and participate in continuous improvement initiatives. Stay current with changes in codes, regulations, and best practices. Qualifications: High school diploma or GED required; technical certification or associate degree in HVAC or Mechanical Engineering preferred. 3+ years of experience in HVAC installation, service, or quality control. Strong understanding of HVAC systems, codes, and quality standards. Proficiency in reading and interpreting mechanical blueprints and technical documentation. Excellent attention to detail and strong problem-solving skills. Ability to work independently and collaboratively in a field-based environment. Familiarity with quality management systems and reporting tools. OSHA 10 or OSHA 30 certification is a plus. Physical Requirements: Ability to lift up to 50 lbs, climb ladders, and work in confined spaces. Comfortable working in various indoor/outdoor environments. There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

and Objectives The Analytical Chemist job duties consist of the technical aspects of the department in support of directions from the QC Analytical Lab Supervisor and the Quality Operations Manager. He/She is responsible for ensuring regulatory compliance to FDA Guidelines (DSHEA), customer requirements, and departmental function. The primary responsibility is to develop and validate analytical methods for various dietary finished product matrixes and train analysts and chemists. He/She will support analytical testing of incoming raw materials, in-process samples, stability, and finished goods within the QC Laboratory. Essential Job Functions Coordinate the testing of raw materials and finished goods with outside labs when required, and allocate results of said testing to the necessary persons. Develop and perform analytical methods based on adaptations of USP, AOAC, NSF, or other industrial resources. Write SOPs and methods to meet cGMP's and GLP. Validate and qualify laboratory methods including writing of protocols and reports. Train chemists and analysts on laboratory methods & procedures when requested. Assist and supervise incoming raw materials and finished product analytical analysis. Perform daily testing of incoming samples using wet chemical and instrumental techniques, as needed. Maintain and record analytical data within prescribed notebooks. Compile analytical testing data and issue testing justification documentation. Compile lab results and issue completed worksheets for final review. Prepare various laboratory reagents as required for daily operations. Order and stock all lab supplies required for operation while keeping cost down through effective sourcing and purchasing. Ensure accuracy and completeness of all QC logbooks and binders. Provide peer review of other chemists' work as needed. Ensure that the QC lab is kept in good repair. Communicate issues and non-conformances to the QC Analytical Lab Supervisor and Quality Operations Manager immediately. Conduct Lab Investigations for all unexpected results. Knowledge, Skills, and Abilities Required Must be Proficient in PC functions, (WORD, EXCEL, ACCESS, POWERPOINT, etc.) and Empower software. Must be well organized and detail oriented. Demonstrate good verbal and written communication skills. Be familiar with and demonstrate excellent advanced laboratory problem solving skills. Must be experienced in advanced laboratory testing methods. Must be knowledgeable in HPLC configuration including column designs, flow rates, reagent variabilities, wavelengths, and detectors. Must be knowledgeable in solubility factors, oil products, water-based products, and oil/water emulsions and the impacts to testing formulations of these designs. Must demonstrate Good Laboratory Practice in completing daily work assignments. Competent in performing mathematical and scientific calculations as they relate to job function. Communication and management skills. Ability to manage, carry out, and prioritize analytical functions. Ability to see areas that need improvement and to address them. Supervisory Responsibility Responsible for ensuring all requirements for Analytical functions are met. Responsible for providing an evaluation of the technical performance of analytical chemists as requested. Working Conditions Working functions are generally limited to the QC lab with some facility work at times. Minimum Qualifications BS Degree in chemistry, analytical chemistry, instrumental analysis, physical chemistry (or extensive analytical laboratory experience in lieu of degree) . 10 years previous laboratory experience. Driven, intelligent, and motivated to succeed and improve. Extensive Analytical (HPLC) analysis experience Excellent people skills, and ability to function under pressure. Success Factors Driven and motivated. Technical leadership. Intelligent and displays aptitude. Problem solving skills. Detail oriented. Self-motivated team player. Well organized. Willingness to cooperate and work with other departments. Benefits Retirement plan 401(k) - 401(k) matching Dental, Vision, Health, Short/long term disability and Life insurance Paid time off Holiday

Job DescriptionProduction Quality TechnicianThe Production Quality Technician plays a key role in ensuring the consistency, safety, and compliance of all manufactured products and processes. This position focuses on quality assurance for batch-manufactured products, incoming raw materials, packaging, labeling, outgoing shipments, product testing, and internal processes - all in alignment with ISO 9001:2015 and the company's Quality Management System (QMS). A strong quality mindset, excellent teamwork, communication skills, and attention to detail are essential for success in this role.Key Responsibilities • Develop a thorough understanding of all processes related to product manufacturing, identification, packaging, shipping preparation, and quality assurance for all products and materials. • Gain comprehensive knowledge of all product lines, documentation standards, and the EBS Quality Management System (ISO 9001:2015). • Perform quality testing, inspections, and reporting on both products and incoming materials. • Prepare, review, and correct Certificates of Analysis and other quality-related documentation. • Record test results and production data; utilize statistical software, data analysis techniques, and SPC charting to monitor and improve performance.• Safely handle, weigh, and transfer hazardous materials from bulk containers for use in production.• Perform calibration, verification, and maintenance on all equipment; monitor and record process and environmental data; prepare reports for management and regulatory agencies.• Maintain a compliant, organized laboratory notebook in accordance with intellectual property protection standards.• Investigate non-conformances and implement corrective and preventive actions. • Support continuous improvement and maintenance of the Quality Management System (QMS) by writing, reviewing, and updating procedures and documentation. • Maintain a clean and safe work environment; consistently adhere to all safety policies and protocols. Qualifications· • Associate degree or higher preferred; equivalent experience or certifications may be considered.· • Strong understanding of mathematics and statistics (beyond algebra).· • Proficiency with Microsoft Excel, Access, and Office Suite; experience with statistical or SPC software a plus.· • Strong mechanical aptitude and familiarity with basic hand tools.· • Excellent attention to detail and a commitment to product quality.· • Ability to read and follow Standard Operating Procedures (SOPs).· • Willingness to work overtime or weekends as needed, and adjust shifts to cover absences or vacations. Physical Requirements· • Ability to perform manual labor in hot, humid, or outdoor conditions as required.· • Work safely in environments with fumes, airborne particles, noise, and vibration while wearing proper Personal Protective Equipment (PPE).· • Physically capable of pushing or pulling objects over 100 lbs; lifting up to 70 lbs unassisted to chest height or on stairs; carrying 70 lb pails between work areas.· • Comfortable standing or walking for up to 3 hours, and able to stoop, kneel, crouch, bend, and twist as needed.· • Must have clear vision, including color recognition, depth perception, peripheral vision, and the ability to focus on fine details. E04JI800t97s4083npp

Job Description Kingspan Insulated Panels North America, a division of the Kingspan Group Plc headquartered in Ireland, is a global and trusted leader in the design, manufacturing, and supply of high-performance sustainable building products and solutions for the construction industry. As the most energy-efficient, cost-effective building envelope solutions, insulated metal panels are at the forefront of sustainability. We serve the architectural, commercial/industrial, cold storage and food processing markets, and are committed to delivering the most advanced building products on the market. Learn about our Planet Passionate initiatives: ******************************************* At Kingspan, our future success is based on the quality of our people, who's expertise and motivation have helped ensure that we remain at the forefront of the construction materials manufacturing industry. In joining Kingspan you become an important part of a growing organization with a reputation for innovative design and use of technology, technical expertise, product quality, service excellence, and dedication to sustainability. Ready to be part of our team? Pay rate $19.50 3rd Shift We are looking for a Quality Technician Lead for our DeLand, FL facility. Summary: Maintain quality control objectives and execute quality control procedures while working in strong cooperation with other departments. Essential Duties: • Audits work stations and inspects finished product. • Works in close cooperation with production personnel under minimal supervision. • Identifies, disposes of, and escalates quality issues. • Works on containment and corrective actions. • Tests incoming raw materials. • Carries out periodic in-process checks. • Records and reports issues and test results, ensuring records are accurate. • Participates in quality meetings. • Participates in periodic operator cross-training and continuous improvement projects. • Executes other procedures as required. • Occasionally carries out field service repairs. • Responsible for the maintenance of ISO 9001-relevant activities. • Ensures containment and documentation of non-conforming materials. • Follow the Group Code of Conduct and Group Compliance. • Follow Compliance requirements per “KNA-SOP-1705 Compliance Roles and Responsibilities.” • Performs all other duties as assigned. Education/Experience: • 1+ years of manufacturing experience required. • Quality control experience is preferred. • High school Diploma or equivalent preferred. Skills and Other Requirements: • Detail-oriented and able to display good organizational skills. • Ability to work and communicate cohesively with both Management and production associates. • Good problem-solving abilities and hands-on technical skills. • Experience with Microsoft Office (Word, Excel, PowerPoint, and Outlook) preferred. • Fork truck experience or ability to train & become certified. • Ability to work at heights above 4 feet. • Ability to work independently Physical Demands: The physical demands described here represent those required to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform key responsibilities. • Body Movement & Posture: Standing or walking for extended periods, frequent bending, stooping, crouching, or kneeling, climbing stairs or ladders, crawling, or working in confined spaces. • Manual Dexterity & Handling: Using hands and fingers to grasp, manipulate, or assemble objects, operating machinery or tools with precision, repetitive motion tasks (e.g., packaging, sorting). • Strength & Lifting: Lifting and carrying materials (often 25-50 lbs.). Pushing or pulling carts, pallets, or equipment. Adjusting body movements to match the pace of moving objects. • Sensory Requirements: Near and far visual acuity for spotting defects or reading gauges. Hearing alarms, instructions, or machinery sounds. Peripheral vision for monitoring surroundings. • Cognitive & Environmental Factors: Maintaining focus in noisy or fast-paced environments. Performing tasks independently or in teams. Exposure to heat, cold, dust, or chemicals, depending on the facility. We offer a comprehensive benefits package including 401k with company match, Medical, Dental, Vision, Identity Theft Protection, Critical Illness, Accident, Hospital Indemnity, Pregnancy and Parental Leave, Fitness Reimbursement, Educational Assistance, Life, AD&D, Short- and Long-Term Disability, and Life Assistance Program. Kingspan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws.

We are seeking a part-time, Chemical Lab Technician to support our R&D and manufacturing laboratory operations. This role is ideal for a recent graduate or current student looking to gain hands-on laboratory experience in a professional engineering and research environment. The Chemical Lab Technician will assist with maintaining a safe, organized, and compliant laboratory while supporting routine testing and applied research activities. Key Responsibilities As a part-time Chemical Lab Technician, you will: Assist in maintaining Safety Data Sheet (SDS) records for laboratory chemicals Support proper handling, labeling, storage, and disposal of chemicals and chemical waste Help maintain laboratory cleanliness, organization, and safety standards Assist with chemical inventory tracking and ordering under supervision Operate and support routine use of laboratory instrumentation under guidance, including: Gas Chromatography (GC) High-Performance Liquid Chromatography (HPLC) UV-Vis Spectroscopy FTIR Spectroscopy Thermogravimetric Analysis (TGA) Differential Scanning Calorimetry (DSC) Assist with experimental setup, data collection, and basic documentation Follow established laboratory procedures, safety protocols, and training requirements Education Pursuing or recently completed an AS or BS in Chemistry or a closely related field Experience & Skills Coursework or academic laboratory experience required Strong interest in laboratory work, safety, and chemical handling Ability to follow written procedures and maintain accurate records Good organizational skills and attention to detail Willingness to learn laboratory instrumentation and safety practices Additional Requirements U.S. Citizenship (required by ITAR regulations GPA greater than 3.3 at all degree levels Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Teledyne Marine** is a group of leading-edge undersea technology companies that have been assembled by Teledyne Technologies Incorporated. Through acquisitions and collaboration, over the past 10 years Teledyne Marine has evolved into an industry powerhouse, bringing the best of the best together under a single umbrella. With technologies divided into 5 core segments; Imaging, Instruments, Interconnect, Seismic and Vehicles, Teledyne Marine sales staff can address not only brand level solutions, but turn-key, customized systems that leverage our full range of technology. Our goal is to provide one-stop purchasing capability, world-wide customer support, and the technical expertise to solve our customer's toughest challenges. A Sea of Solutions.....One Supplier. For more information, visit our website at ********************** . **Essential Duties and Responsibilities:** **_Calibration Duties_** + Create, review and execute purchase requisitions for external calibration. + Conduct in-house calibrations on: + Micrometers + Calipers + gage pins + soldering irons + Pressure gages + Transducers + Tape Measures + Dial Test Indicator + Dial Indicators + Temperature Control Units + Digital Scales + Scan and attach calibration certifications for retention. + Shipping preparations for outsource calibration houses. + Maintain and monitor measuring instrument schedule and recall program. + Initiate investigation of overdue or damaged equipment to determine impact on product. **_Certification Review Duties_** + Review all incoming certification documentation (certs) provided by suppliers. + Review the PO requirements provided to the supplier at the time of PO placement. + Ensure that all information required by the PO to be on the certs is: + Provided on the cert + In compliance with the PO requirements (i.e., chemical composition percentages are within the correct ranges, materials testing results are within the correct ranges, has correct testing performed, etc.) + Legible and in a format that makes later review of these certifications by customer feasible. + Interact with Engineering, Book Build, Components Inspection, and others to clarify PO requirements and cert information as required. + Provides feedback to suppliers, via Procurement, as required to obtain correct certs or to return non-conforming material to the supplier. + Records data as requested from review results (defect tracking, check sheets, etc.) **Education and Experience:** + High School Diploma or GED Required + 5+ years work experience in quality or manufacturing environment + Technical degree (Associates level or higher) preferred. + High degree of technical knowledge related to materials science and materials testing and analysis preferred. + Familiarity with welding and painting processes and specifications preferred. **Job Knowledge, Skills and Abilities:** + Ability to work with changing demands in a fast-paced environment + Excellent communication skills with both internal and external customers + Knowledge of MS Office to include Word, Excel, PowerPoint, Outlook + Experience in reading technical drawings + Experience with Adobe software + Product knowledge preferred + Quality experience preferred **Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees).** ************************ _What can Teledyne offer YOU?_ A Competitive Salary & Benefits Package Excellent Health, Dental, Vision Paid Vacation Time Paid Sick Time Life Insurance Benefits Paid Holidays 401(k) Eligibility Employee Stock Purchase Plan Fitness Challenges Educational Tuition Reimbursement Employee Fun Events throughout the year Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job DescriptionBenefits: 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Structural Steel Certified Welding Inspector (CWI)/QC) Structural steel fabricator in Leesburg, Florida is seeking an experienced Certified Welding Inspector (CWI). We are looking for a team player with experience in AISC standards and audits. This is a non-traveling position, which reports to the QC Manager. EDUCATION EXPERIENCE: High school diploma or equivalency certificate. 3+ years of experience as a certified welding inspector in a structural steel fabrication facility, as well as experience in Quality Assurance. Current American Welding Society certified welding inspector (CWI). Ability to read and understand drawings plans and specifications. Ability to perform physical activities that require frequent bending at the waist, squatting, climbing, kneeling and reaching about the head. Must be detail-oriented, extremely organized and have a good work ethic. Microsoft Office skills, including Excel, required. Experience working in fabrication shop UT and MT certification is required AISC standards/audit experience highly preferred. RESPONSIBILITIES: Maintain Quality Control Manual, including compliance to all AISC standards. Position involves visual inspection of structural steel, including bolted and welded connections, and performing non-destructive testing. Interpret codes and specifications in accordance with the drawing requirements. Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications and audit program management. Recommend and approve repairs as well as perform visual inspection of work in progress and completed work. Review and verify welding procedures and welder qualifications. Review Mill test reports and certifications

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

Job Title: Quality TechnicianJob Description Work directly with the engineering team to develop new operation processes and operate various machines to produce quality parts as instructed. Ensure all operations adhere to company procedures and safety standards, contributing to a clean and efficient work environment. Responsibilities + Operate Electrical Discharge Machine (EDM), waterjet, air flow, and laser machines to produce quality parts as instructed by Operation Process Sheets. + Work with tools such as drill press, belt sander, orbital sander, swivel deburr, bench grinder, and other hand tools according to instructions. + Utilize inspection equipment to ensure product quality. + Complete documentation accurately and correctly scan on/off shop orders. + Utilize and understand operation process sheets and inspect parts per character control sheets. + Notify Supervisor immediately in case of damage, defect, or inability to proceed efficiently. + Collaborate effectively with team members and other departments as needed. + Use approved software and follow company processes and procedures. + Perform all tasks in a safe and reasonable manner according to the company's Employee Handbook. + Maintain a clean and safe work environment and contribute to the company's 6S program and Lean concepts. + Comply with all quality policies, specifications, regulations, and instructions. Essential Skills + Experience with EDM, fusion, and laser machines, with fiber optic laser experience being a plus. + Fusion hole drilling experience. + Ability to work independently or as part of a team. + Strong focus and attention to detail. + Proficiency in mid-level math skills, including working with whole numbers, fractions, and decimals. + Proficiency in using inspection equipment like calipers, micrometers, gage pins, and height gages. + Ability to read blueprints. + Ability to read and follow company processes, policies, and procedures. Additional Skills & Qualifications + Experience with fiber optic laser technology is desirable. Work Environment The role operates in a manufacturing, fabrication, and welding tooling shop environment. The position is for the 2nd shift from 3:30 PM to 12:30 AM, Monday to Friday. The engineering team works from cubicles off of the large, clean, indoor machine shop. Clients are primarily in the aviation and aerospace sectors, focusing on tooling and fabrication of parts. The company promotes a small, family-oriented environment with a team-first mindset. Job Type & Location This is a Permanent position based out of Palm Bay, FL. Pay and Benefits The pay range for this position is $60000.00 - $72000.00/yr. health/dental/vision insurance, 401(k) with company match, life/disability insurance, paid time off (PTO), tuition reimbursement, and wellness programs like counseling/dietitian access Workplace Type This is a fully onsite position in Palm Bay,FL. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

The County Materials Family of Companies manufactures and delivers concrete construction products to meet the demand for growing communities. We rely on our talented and dedicated team members to provide reliable products with personalized service. We are seeking a Quality Control Technician for County Materials in Astatula, Florida Job Duties: * Performs quality control inspections, checks, and tests during the manufacture of products * Inspects materials, parts and products at different stages of production * Records observations and may make recommendations for improving processes * Familiar with standard concepts, practices, and procedures within the concrete industry * Regularly observes the production process including setup, casting, stripping and storage of product. * Work with production to identify and resolve quality issues related to casting and concrete performance. * Manage housekeeping to ensure a safe workplace. * Other tasks as needed Work Environment: * Work in indoor and outdoor weather conditions, including extreme hot or cold temperatures * Work near moving machinery and equipment - could include electrical hazards * Work in a noisy environment Physical Requirements: * Carrying/Lifting 10 - 40 Pounds frequently * Carrying/Lifting > 40 Pounds occasionally * Standing / Walking / Climbing * Squatting/Crouching/Kneeling/Bending * Pushing / Pulling / Reaching Above Shoulder Experience & Qualifications: * Understanding of a manufacturing environment. * Concrete plant and/or quality control experience highly desired. * Ability to interpret shop drawings and job specifications. * Proficient Computer Skills with Microsoft Office. * Solid math aptitude. * Must have the ability to train and obtain technical certifications as directed and supported by the company. * Ability to work independently. * Strong organizational, interpersonal and communication skills. * High School diploma or equivalency required. * 1-2 years prior experience in a manufacturing environment * Experience in the construction and/or building materials industry preferred, not required.