Quality control technician jobs in Baltimore, MD

Job Description Summary/Objective: The Technical Service/Quality Control Technician implements and complies with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications. Essential Functions: Perform specimen tests of concrete from random loads or for special jobs or mixes; prepare test reports as required. Oversee unique jobs to ensure product standards are met, i.e., jobs that have restrictive specifications or require large quantities of material to be delivered. Perform aggregates and batch plants tests including daily graduation and moisture tests on all concrete being produced for State and spec projects. Certify concrete loads being delivered to "spec" jobs in accordance with SHA specifications; check loads for proper procedure and time of mixing. Perform quality assurance tests on trial batches of new concrete mix designs under close tolerance conditions and make adjustments until mixture meets specifications. Troubleshoot problems with customers, analyze and evaluate specific conditions, situations, quantities, etc., and provide appropriate resolution. Provide technical assistance and training to plant managers, equipment and yard operators, and drivers when requested. Perform laboratory tests including gradation, moisture, lightweight particles and specific gravity tests on aggregates. Select samples for materials that need certification by an outside laboratory or that are beyond the department capability. Transport these samples to the testing agency. Perform additional tasks such as cleaning facilities to ensure safety and cleanliness, moving equipment and materials, and completing tasks for other positions when incumbent is absent. Assist the Technical Services Manager and Assistant Manager as needed. Other duties as assigned. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/office and outdoors/field Exposure to dust and fumes/offensive smells. Exposure to chemicals such as concrete, chemical admixtures. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 50 lbs., repetitively lift 50 lbs., carry approximately 50 lbs., and push/pull approximately 75-100 lbs. Reach overhead and reach away from the body. Minimal kneeling, squatting and climbing may be required. Sit 3 hours per day, stand 5 hours per day, and walk 2 hours per day. ADDITIONAL QUALIFICATIONS Experience: Laboratory testing experience in ready-mix concrete or aggregates preferred. Special Skills: Written communication, verbal communication, and basic mathematical skills. Ability to use a computer and iPad, including Microsoft Office. Ability to use the company dispatching system. Ability to compute basic material calculations. Excellent interpersonal skills. Able to exhibit a high level of confidentiality. Excellent organizational skills. Must be able to identify and resolve problems in a timely manner. Certifications: Valid Driver's License. ACI Level 1 certification (must be obtained within 1 year of assuming position). Industry Related Experience or Skills: Background in concrete, construction, mining operations or building materials (preferred). Education Required: High School Preferred Education: N/A Bilingual in Spanish Preferred: Yes Interested in future opportunities with Chaney? Join our Talent Community to get alerts about newly posted positions. Click here to sign up!

Who YOU are and what YOU can become The Quality Technician/Designated Supplier Quality Representative (DSQR) will have responsibility of all Quality functions for 2nd shift Assembly and as DSQR, is responsible for the inspection and acceptance of hardware / end item deliverables on behalf of the customer. The individual will be responsible for ensuring all engineering and regulatory requirements are met to ensure customer satisfaction. The Quality Technician/ DSQR will be a part of a cross-functional technical and operations team to focus on achieving business objectives. Who WE are and where WE are going At ST Engineering MRAS, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. What YOU will do * Manages all Quality functions for assembly program supporting 2nd shift operation. * Review and accept hardware on behalf of customers prior to delivery as DQSR, including generation of conformance certificates and all acceptance documentation. * Obtain and maintain FAA certification to provide Aircraft On Ground (AOG) support. * Acts as the Point of Contact for 2nd shift inspectors. * Assists with development of Root Cause/Corrective Action with some guidance using established RCCA tools (PFMEA, DMAIC, Apollo, 5 WHYs, 8D, etc.). * Provide Quality support and assistance with Inspection personnel while performing First Article inspections. * Processes all Nonconformance Items and Workflows in a timely manner. * Solicits weekly prioritization of tasks and deliverables that align with business objectives. What YOU must bring to Succeed High school diploma / GED with at least 2 years experience in Manufacturing or Quality. Knowledge of Aerospace / DOD / assembly line experience is highly preferred. * Acquire and maintain multiple customer representative certifications for acceptance of hardware. * Knowledge and experience for problem solving techniques such 5 why's, Fishbone, Process mapping, etc. to identify root cause and define CAPA. * Must be able to work 1st shift for three months before transitioning to 2nd shift. * This position involves access to export-controlled technology which requires U.S. Person status or government authorization. A 'U.S. Person,' as defined by 22 C.F.R. §120.62, includes U.S. citizens, U.S. nationals, individuals lawfully admitted for permanent residence (green card holders), and individuals granted asylum or refugee status in the United States. To be considered for this position, you must either be a U.S. Person or fall within a legally recognized export control exception or authorization. If hired, you will be required to provide valid proof of such status. Desired Characteristics: * Strong oral and written communication skills. * Strong interpersonal and leadership skills. * Willingness to support business needs as required to meet company objectives. * Maintain customer required inspection reports. * Work with Program QE on resolution of customer identified quality issues. * Perform inspections across all stages of production. * Strong analytical, problem solving, and root cause analysis skills. * Ability to multitask and handles tasks with competing priorities effectively. * Demonstrated ability to work independently with minimal supervision. * Detail oriented and strong computer skills. * Preferred minimum of 1 year of experience in Production Quality. * Working knowledge of PPAP and APQP, AS9145, ISO9000 / AS9100 At ST Engineering - MRAS, we offer great rewards, competitive pay, career advancement and growth opportunities. Estimate salary range for this role $52,300 to $75,900 per year. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering - MRAS Benefits: As a full-time employee of ST Engineering- MRAS, you are eligible for our benefits package including: * Medical, Dental, and Vision coverage starting from start date * Health Flexible Spending Accounts * Free Onsite Gym with weekly fitness classes * Immediate 401k vesting * Educational Assistance * Life Insurance * Paid Time off (Permissive for exempt staff) Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: Baltimore Apply now "

Competitive Range partners with the government to plan and deploy complex, IT-enabled, and mission-essential capabilities. Our goal is to help you develop and expand your professional capabilities while working on challenging, exciting projects in a collaborative, congenial environment. Competitive Range Solutions requires the expertise of a talented and experienced Primary Technical Control Facility Lead to assist in directing and managing the program's executive support group. The candidate must reference their ability and experience working in a Department of Defense (DoD) customer environment and effective integration with a government multi-contractor team. The Primary Technical Control Facility Lead oversees the DoD Technical Control Facility, and it will manage state-of-the-art technical control services, telecommunications networks management, circuit engineering, and equipment maintenance across secure and non-secure voice, data, optical, record, and digital message traffic services. Roles and Responsibilities: Ensure 24x7x365 circuit restoration, fault isolation, and status reporting in alignment with DoD regulations and operational procedures. Oversee circuit engineering, system engineering, quality control (QC), testing, trend analysis, and performance monitoring in accordance with DoD policies. Designate node site coordinators to support DoS worldwide missions and maintain the technical control group's email communication for message coordination. Manage the Technical Control Facility Service Desk, ensuring completion of tasks related to day-to-day operations, COMSEC integrity maintenance, and trouble ticket management. Perform network administration, maintain, and engineer transport equipment and networks, and ensure compliance with security standards. Oversee 24x7x365 Tier I and II maintenance support on all TCF equipment, following the established Government Maintenance Plan/SOP. Manage COMSEC accounts and perform encryption changeovers, issues, and destruction in compliance with DoD standards. Develop and maintain a comprehensive training program for all technical control personnel, including hands-on training on troubleshooting circuits. Utilize assessment tools like MADSS for real-time and predictive assessments of operational impacts on the DODIN. Qualifications/Experience: Active TS/SCI Clearance Minimum five years' experience with managing and operating cryptographic facilities. Demonstrate knowledge in maintaining the operational status of a Tech Control Facility Knowledge of Tech Control equipment such as Switches, Encryption devices, Network Operation Consoles, and Circuits. Demonstrated successful working knowledge and supervision of tech control employees in efforts similar in size and scope as referenced under this Call Order. Demonstrated ability for oral and written communication with the highest level of management. Must have knowledge of operating and maintaining Tier 2 Tech Control Helpdesk. Ability to provide technical directions and supervision in coordinating, restoring, and reporting functions necessary for effective maintenance of transmission paths and facilities. Knowledge of industry-accepted standards and best practices related to Information Management Operations and ITSM best practices. Knowledge in handling and managing incidents and service requests for activities such as changes, problems, configurations, and requisitions for equipment and services. Education/Certifications: Bachelor's Degree in a related field (required). ITIL (preferred).

DAP is seeking a meticulous Quality Technician to join our team at the Baltimore Manufacturing Plant! Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes: Pension Plan 401k with Company Match Health/Dental/Vision Insurance Paid Parental Leave Stock Purchase Plan ...and much more! Under the direction of the Quality Manager and Supervisor, this position will perform various tests and audits of materials/products including raw materials, packaging, and finished goods to ensure compliance with established specifications. The facility is a 24/7 operation and, while you must be able to work any shift, the openings are currently for the following shift: 2nd shift (Monday to Thursday from 3:00 pm to 1:00 am) Overtime is available/required. Associates earn double-time pay for all hours worked in excess of 50 hours in your standard work week! Responsibilities: Inspection and testing of incoming raw materials Test, inspect, and approve batch samples Perform and document equipment calibrations Execute line and mixer audits throughout the shift to ensure product and process compliance Ensure all DAP Quality Management System processes are followed Maintain various reports and computer databases to record activities Completes all required paperwork accurately and timely Abides by plant safety policies and maintain appropriate housekeeping in the lab Skills/Requirements: 1-2 years of experience in quality control Familiarity with computer software (SAP, WinSPC) Ability to lift 40 pounds regularly and ability to stand for periods of up to 3 hours Acute attention to detail Excellent communication skills within and outside of the Quality department About DAP DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at ******************** DAP - On the job since 1865.

DAP is seeking a meticulous Quality Technician to join our team at the Baltimore Manufacturing Plant! Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes: Pension Plan 401k with Company Match Health/Dental/Vision Insurance Paid Parental Leave Stock Purchase Plan ...and much more! Under the direction of the Quality Manager and Supervisor, this position will perform various tests and audits of materials/products including raw materials, packaging, and finished goods to ensure compliance with established specifications. The facility is a 24/7 operation and, while you must be able to work any shift, the openings are currently for the following shift: 2nd shift (Monday to Thursday from 3:00 pm to 1:00 am) Overtime is available/required. Associates earn double-time pay for all hours worked in excess of 50 hours in your standard work week! Responsibilities: Inspection and testing of incoming raw materials Test, inspect, and approve batch samples Perform and document equipment calibrations Execute line and mixer audits throughout the shift to ensure product and process compliance Ensure all DAP Quality Management System processes are followed Maintain various reports and computer databases to record activities Completes all required paperwork accurately and timely Abides by plant safety policies and maintain appropriate housekeeping in the lab Skills/Requirements: 1-2 years of experience in quality control Familiarity with computer software (SAP, WinSPC) Ability to lift 40 pounds regularly and ability to stand for periods of up to 3 hours Acute attention to detail Excellent communication skills within and outside of the Quality department About DAP DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at ******************** DAP - On the job since 1865.

Requirements SKILL REQUIREMENTS: Commitment to a safety culture where safety is the first consideration before starting any task. Proficient with the use of manual inspection equipment. Experience programming and/or operating CMMs using PC-DMIS is preferred, but not required. Selects and uses appropriate inspection equipment and techniques. Interpret drawings and specifications. Determines acceptability of quality of work. Meets time and quality standards. Seeks out additional duties when it is needed. Brings up potential problems with suggested solutions. Promotes a positive environment through what is said and by setting an example. QUALIFICATIONS: Graduate of related two-year vocational school program and two years related work experience and/or training; or equivalent combination of education and experience is preferred, but not required. Able to work in a dynamic environment with changing priorities to exceed customer expectations. Works independently, has a strong work ethic, is self-motivated and able to complete tasks with minimal supervision. Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time. Computer aptitude (Outlook, PowerPoint, Word, and Excel). Ability to read, write, and communicate in the English language. Must be a team player and willing to learn new skills and concepts. Eligible to work in the United States without company sponsorship. Salary Description $18

Work Schedule First Shift (Days) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cold Room/Freezers -22degreesF/-6degrees C, Office, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Warehouse Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: The Clinical Diagnostics Division (CDD) provides innovative diagnostic solutions for select IVD market segments and has been a trusted supplier in the IVD industry for over 40 years. The division provides products for drugs of abuse testing, therapeutic drug monitoring, quality control, sepsis diagnosis, prenatal screening and more. How Will You Make an Impact?: As part of the Middletown, VA team, some of the world's largest suppliers of in vitro diagnostic (IVD) products rely on us as their OEM and contract manufacturing partner. With over 35 years of experience, customers count on us for quality, compliance, and reliability. A Day in the Life: Prepare specimens for testing. Test and release product in accordance with written test procedures. Schedule testing to meet department and plant commitments. Maintain instrumentation/equipment in alignment with manufacturer's labeling and in-house audit and calibration procedures. Leverage GMP in Maintaining records and logs. Maintain working laboratory inventory. Conduct other laboratory functions required to support business needs. Assist in training of peers. Education: High school diploma or equivalent required. Experience: Required: Minimum of 1 year of work experience in QA or QC or related field Required: Experience in a cGMP environment Knowledge, Skills, Abilities: Ability to speak, read, and write in English, including technical and scientific language. Ability to perform basic math including addition, subtraction, multiplication, and division. Physical Requirements / Work Environment Ability to stand for long periods of time (up to 10 hours a day) Ability to lift up to 50 lbs Ability to move repetitively, including pushing, pulling, lifting, twisting, bending, grasping, and crouching What We Offer Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in Maryland is $18.65-$31.08. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Join our amazing team and contribute as a: Quality Control Technician I ABOUT THE ROLE Performs quality control tests for the specific product line in accordance with established local or national standards. This position will be required to conduct quality control tests within the precision standards established by ASTM and AASHTO. The position will be required to report results upward and seek assistance to analyze data. Conducts in depth problem solving, detailed data and trend analysis, and troubleshooting associated with aggregate material performance. This position also assists the Material Performance Manager of the product line in the implementation of best practices and techniques, in regards to product quality and quality initiatives. WHAT YOU'LL ACCOMPLISH * Carries out ongoing lab and field sampling. * Testing to ensure that material produced and shipped meet State, project and customer specifications and expectations. Failure to do so will result in rejection of products that could produce significant negative impact to (1) Market Area financials and (2) Amrize's image in the marketplace. * Assist with the development, administration, implementation and documentation of material control plans and related material performance data, procedures and project-specific quality control. * Perform some service, repair, and calibration of laboratory and field testing equipment on a timely basis. * Carries out regular updates to appropriate Quality Control and Quality Assurance test databases and spreadsheets and provide report summaries or analyses as needed. * Able to learn the basic operations of cement, asphalt or aggregate plants. * Provide "troubleshooting" guidance and advice, for various customers both internal and external. * Technical material performance support and expertise provided for all plants in geographic area. * Recommend and assist with plant changes to ensure conformance and consistency. * Assist Plant Superintendents and Managers as required. * Assist Material Performance personnel in other areas, when available. * Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Education: High school diploma or equivalent Required Work Experience: At least 2 years of relevant experience. Additional Requirements: * Two years of post-secondary technical education or equivalent in experience. * Availability and willingness to work flexible hours including some nights and weekends to meet customer needs. * This position requires as an essential function: 1.Reliability 2.Ability to lift and carry 50 lbs over uneven ground for a distance of 300 ft 3.Dependable attendance 4.The ability to get along with co-workers at all levels of the organization. 5.The ability to pass the post offer physical examination and pre-employment drug screening * Maintain a plant diary documenting weather conditions, amterial produced, samples taken, problems, corrective actions and general comments related to quality. * Educates customers in proper application of all Amrize products. * Job coordinator for on-site quality control work as needed. * Assist salesmen, superintendents and managers as required. * Customer service with regards to testing and product information. * Completion of testing in a timely manner. * Responsible for own ongoing maintenance, calibration and calibration documentation of testing equipment. * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER * Competitive salary * Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings * Medical, Dental, Disability and Life Insurance * Holistic Health & Well-being programs * Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care * Vision and other Voluntary benefits and discounts * Paid time off & paid holidays * Paid Parental Leave (maternity & paternity) * Educational Assistance Program * Dress for your day HR Contact: Roscoe Chambers BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Asphalt Quality Control Technician M.T. Laney Co. Inc. is an established, successful construction firm located in Eldersburg, MD. We are searching for an experienced, committed, career-minded Asphalt Quality Control Technician to be part of our growing team in the Baltimore/Washington Metropolitan area. The ideal candidate will be a team player who is highly motivated, with a strong work ethic, and desires to be part of a skilled construction team. RESPONSIBILITIES: Adhere to and follow all safety rules and regulations of OSHA and MT Laney Company. Always ensures a safe work environment for self and others Perform sampling, processing, and testing materials used in the production of Hot Mix Asphalt Communicate with Plant Lab Manager, Field Superintendents, as necessary, in a professional manner Prepare and maintain Daily Progress Reports, QC Charts, and testing records. Evaluate test results and communicate with QC/QA Lab Manager to assist with maintaining compliance with specifications, including mixture blend changes. Perform maintenance and calibration of lab testing equipment and document findings. Select products for tests at specified stages in the production process and test products for various qualities. Assist the QC/QA Lab Manager in designing, organizing, and implementing a quality control operation. Identify problems, gather and analyze information and make appropriate recommendations. ESSENTIAL REQUIREMENTS: Strong attention to detail Ability to multitask, prioritize, and work well under pressure to meet deadlines Monitor the quality of all work self-performed or subcontracted Comply with municipality requirements, specifications, safety standards, and company policies Must have strong computer skills and maintain accurate data using tablet and software Must obtain a clean MVR SALARY/HOURLY EXEMPTION: Full-Time, Non-Exempt Position Salary based on knowledge, experience, and education WORKING CONDITIONS: While performing the duties of this job, the employee is regularly exposed to outside weather conditions that can include extreme cold and heat The work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project Use of Personal Protection Equipment is required WORKING HOURS/EXPECTATIONS: Ability to work more than 40 hours in any given week, including weekend assignments as required PHYSICAL AND MENTAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, bend, kneel, or crouch on all different types of terrain Frequent bending, twisting, and standing The employee is also regularly required to talk, hear, or smell as well as use hands to finger, handle or feel The employee must regularly lift 75 pounds and move on occasions Exposure to working outdoors in all weather conditions Drive and sit for prolonged amounts of time Must be able to pass a DOT Physical Must be able to pass a Drug Screen EDUCATION: High school or equivalent is preferred LICENSES, AND CERTIFICATIONS: Valid Driver's License Asphalt Paving Levels 1 & 2 HMA Field Technician Qualifications EXPERIENCE: At least one year of Asphalt Control Technician experience required BENEFITS: M.T. Laney offers a selection of competitive lifestyle benefits, which include the following: Competitive wages, Medical, Dental, Vision, Life, Disability, Accident Insurance, PTO (Paid Time Off), 401K with Employer match, and Paid Holidays EOE STATEMENT: M.T. Laney Co., Inc. is an equal opportunity employer

Job DescriptionJob Title: Quality TechnicianLocation: Laurel MDJob Type: 3-6 month contract Industry: [Manufacturing/Electronics/Defense] Job Summary:We are seeking a detail-oriented and experienced Quality Technician to join our team. The ideal candidate will possess an IPC-A-610 or IPC/WHMA-A-620 certification and will have hands-on experience inspecting electronic assemblies to industry standards. Experience operating and programming CMMs using PC-DMIS or similar software is highly desirable. Key Responsibilities:Inspect electronic assemblies and cable/wire harnesses in accordance with IPC 610 or IPC 620 standards.Perform visual inspections for soldering, component placement, wiring, and mechanical integrity.Utilize inspection equipment including microscopes, calipers, micrometers, and gauges.Operate and/or program Coordinate Measuring Machines (CMM) using PC-DMIS or similar software (a plus).Maintain accurate inspection records, reports, and quality documentation.Assist in root cause analysis and corrective/preventive action implementation.Collaborate with production, engineering, and quality teams to identify and resolve quality issues.Ensure compliance with company and industry quality standards. Requirements:IPC-A-610 or IPC/WHMA-A-620 Certification (required).2+ years of experience in a quality assurance or inspection role within a manufacturing environment.Experience with electronic assemblies, PCBAs, or cable/wire harnesses.Familiarity with CMM operation and PC-DMIS programming (preferred but not required).Strong attention to detail and documentation accuracy.Ability to interpret technical drawings and inspection criteria.Excellent communication and problem-solving skills. Preferred Qualifications:Experience in ISO 9001, AS9100, or similar regulated environments.Knowledge of statistical process control (SPC) and quality tools (e.g., Pareto, Fishbone).Proficiency with MS Office Suite.

🕒 Work Hours: 8:00 AM to 4:30 PM, Monday through Friday 💲 Pay Range: $19 - $24 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is looking for a Quality Technician to join their Boss Division in Chestertown, MD! In this role, you will be responsible for in-process audits in production, inspecting and approving incoming materials, and managing calibration of gauges. This position is ideal for someone who takes pride in precision and has a strong background in inspection, measurement, and metrology. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. 🚚 What You'll Do: Inspect and approve incoming materials, in-process production, and finished goods against engineering drawings and specifications. Perform visual and dimensional inspections using height gages, calipers, micrometers, optical comparators, and other precision measurement tools. Document inspection results through reports, logs, and database entries, including rework and scrap tracking. Communicate nonconformances to affected parties and follow up for required adjustments. Issue Corrective Actions where appropriate based on internal guidelines. Maintain and manage all production gauges; performing in-house calibration where possible and coordinating third-party calibration when necessary. Verify proper operation of gauges; manage inspection and repair as required. Ensure compliance with company quality standards, safety practices, and regulatory requirements. Maintain SOPs for the Quality department, making revisions and updates as needed. Assist with auditing internal work procedures and making recommendations to address non-conformances. Participate in continuous improvement efforts to enhance quality systems and reduce rework. 🎯 What We're Looking For: High school diploma or equivalent required; Associate degree in STEM or related coursework preferred. 1-3 years of experience in a quality, inspection, engineering or manufacturing role is preferred. Some experience in reading blueprints and using measurement tools is required. Strong working knowledge of mechanical measurement equipment such as calipers, micrometers, height gauges and thread gauges. Familiarity with engineering drawings, blueprints, and industry specifications such as ANSI, ASTM, API and 3A. Familiarity with quality documentation, reporting, and data entry. Detail-oriented, with strong organizational and communication skills. 🌟 What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Under minimal supervision of QC management, the QC Chemist performs physical and chemical testing on raw materials, in-process and finished products, as well as stability samples. Utilizes established methods and standard operating procedures and laboratory equipment to perform testing of materials. Prepares high quality written documentation, such as notebooks, logbooks, standard operating procedures (SOPs) and LIMS reports. Trouble shoots analytical equipment. Provides training on analytical methods and new technologies. Responsibilities: Performs analytical testing of raw materials, in-process materials, finished products and stability samples. Operates laboratory equipment such as balances, pH meters, hardness testers, particle size analysis, LOD, Karl Fischer, Melting Point, etc. in accordance with laboratory SOPs and test methods. Effectively performs routine testing using HPLCs, GCs, UV-VIS, FT-IR and ICP-MS equipment in accordance with SOPs and test methods. Performs data analysis and evaluation of test results. Prepares reports and reviews data. Maintains accurate records of test data, maintains laboratory notebooks and logbooks in accordance with company guidelines and GDPs. Assists in writing and revising SOPs and tests methods as needed. Follows documented procedures: SOPs, test methods, and transfer protocols. Performs routine maintenance, calibration, and performance verification on applicable instruments. Performs investigation activities and writes deviation and investigation reports. Suggests and writes CAPAs. Follows lab safety procedures. Perform other duties as assigned. Qualifications: Bachelors in chemistry or related physical/biological science, or equivalent combination of education, training and professional experience that provides the individual with the required knowledge, skills, and abilities. Minimum of 3 years' experience in Pharmaceutical Analysis Must understand analytical chemistry. Demonstrated knowledge of cGMP regulations and ICH guidelines Computer literacy and ability to use data acquisition and processing software, such as EMPOWER 3 Demonstrate the ability to read, analyze, and interpret USP/NF methods, SOPs and technical procedures manuals, and batch records. Demonstrate the ability to define problems, collect data, establish facts, and draw valid conclusions; interpret an extensive variety of technical instruction in mathematical or diagram form. Knowledge of basic laboratory practices, methods, and techniques Demonstrate the ability to carry out work assignments communicated orally or in writing. Demonstrate familiarity with Lean Six Sigma Methodologies and proven analytical/ problem solving capabilities. Demonstrates the ability to establish good working relationships with other departments, including vendors, colleagues, and subordinates. Demonstrates the appropriate technical knowledge necessary to make sound decisions on development issues with minimal supervision. Demonstrate the ability to analyze data and information and assess and resolve complex problems/issues as required. Must be able to comprehend and follow all applicable SOPs. Demonstrate ability to acquire the appropriate knowledge from resources on with electronic Quality Management Systems such as MasterControl and Trackwise. Demonstrate understanding of the current federal, local, and international regulations regarding the production, testing, and release of drug substances and products. Good understanding of cGMPs, industry, and regulatory standards and guidelines. Demonstrate familiarity with Microsoft programs like Word, Excel, PowerPoint, Project, Teams, Outlook, etc. Demonstrate the ability to portray the appropriate level of integrity and professionalism. Demonstrate the ability to communicate effectively with management, staff, regulators, and client representatives in written and verbal formats. Demonstrate the ability to complete tasks accurately and according to established and shifting timelines. Demonstrate the ability to make quality scheduling, resource allocation, and priorities decisions. Energetic, execution-focused, self-motivated, and organized individual who is accustomed to working in a deadline-focused, high-pressure entrepreneurial environment. Results-oriented and efficient. Creative and open-minded who fosters an environment in which sharing of ideas is encouraged. Demonstrate the ability to work closely with a diverse customer and employee base (internally and externally). Demonstrate the ability to work well in a cross-functional team environment. Must communicate fluently in English and have legible handwriting. Physical Demands: Ability to travel between and within facilities to visit staff, operations, and projects, as needed. Ability to sit, stand, climb stairs, and climb ladders to mezzanines (when necessary). Ability to lift up to 40 pounds on occasion. Ability to use PPE (safety shoes, goggles, respirators, gloves, etc. when necessary).

Local Manufacturing company in Hanover has an immediate opening for an experienced Metal Quality Technician for 1st shift. PAY $16 - $25/hr DOE.

The Quality Technician is responsible for performing daily verification activities to ensure that all raw ingredients, raw materials, packaging, and finished products comply with all applicable regulations and meet or exceed the customer's expectations and to act when predefined standards are not met. This position will also help manage product quality tracking systems, state regulatory standards, internal and external audits, etc. The goal for this role is to ensure compliance with all Green Thumb policies and procedures, as well as applicable federal, state, county, and municipal laws, ordinances, and regulations. DUTIES AND RESPONSIBILITIES: Supports the Quality Department and ensures all employees understand and follow all standard operating procedures (SOPs). Perform incoming inspections of materials received and ensure compliance with all specifications and requirements. Execute in-process and finished product sampling as required. Conducts positive release of all finished goods, which includes review of in-process batch documentation, packaging, labeling, logbooks, test results against internal specifications, and other production paperwork as required. Ensures good documentation practices are followed and all records are filed and maintained accordingly. Assist with segregation, control, and disposition of non-conforming product. Identify, recommend, and perform quality training as needed. Ensure maintenance and control of production quality records. Assist Quality Manager and production personnel in the investigation of root causes of quality incidents and non-conformances and assist with documenting and performing corrective and preventative actions. Continually study the existing quality system and make recommendations for improvements. Perform improvement projects as identified. Monitors compliance to established current Good Manufacturing Practice (GMP) guidance. Expected to adhere to safe work practices, follow general GMP and food safety guidelines, maintain sanitary conditions and ensure that product quality is maintained. Report to management any conditions or practices that may adversely affect product safety, product quality or personnel safety. Maintain and foster a positive work atmosphere. Perform pre-operation inspection and sanitation verification of production areas as required. Perform allergen and environmental swabbing activities as needed. Performs other duties as assigned. Working Conditions Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Associate degree in a related field preferred, or equivalent combination of education, training and/or experience. Prior experience in regulated industry in healthcare, medical devices, pharmaceutical, consumer packaged goods (food), or cannabis is highly desired. Food and Drug Administration (FDA), Good Manufacturing Practices (GMP), Safe Quality Food (SQF) and Hazard Analysis Critical Control Point (HACCP) experience is highly desired. Strong experience with product sampling and inspection. Must have the knowledge and skills required to work in a fast paced and challenging environment Must be able to work variable day shifts dependent on business need Ability to follow written procedures and monitor others for adherence to written procedures. Ability to work independently, handle multiple tasks and problem solve effectively. Exceptional computer skills in Microsoft Office Suite (Access, Excel, Outlook, PowerPoint, Publisher, Word). Should have a solid understanding of the Cannabis laws, rules and regulations or a passion to further their understanding and knowledge of the industry and the laws. Prior cannabis experience not required Additional Requirements Must pass all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry Our Mission: To promote well-being through the power of cannabis. We're humble-We prefer quiet confidence and don't shout about our success. We're hardworking-We put our heads down and get the job done. We're grateful-Working in our industry is a privilege and an act of service. We're transparent-Honest and open communication keeps us healthy as an organization. We're collaborative-And believe good ideas can come from anywhere. We have a growth mindset-One that's grounded in well-being. At Green Thumb we believe that our corporate community should be a reflection of the communities we serve. We are dedicated to fostering an inclusive culture that celebrates diversity across race, sex, age, gender identity, sexual orientation, disability, nationality, religion, experience, and thought-not only because it is right, but because it makes us better. Our mission-the right to wellness-informs our commitment to champion economic opportunities in communities disproportionately affected by the war on drugs through employment and community involvement. Green Thumb is proud to be an equal opportunity workplace. We can't wait to meet you. As a Green Thumb team member, you will have access to excellent benefits and incentives including: Health, dental, and vision insurance Paid Time Off Employee Discount Mental Health Programs 401(k) Daily Pay Supplemental Insurance Perks Marketplace Flexible Spending Account / Health Spending Account And much more The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$20-$21 USD

The Work Study - Tech Biology will participate in research activities with a specified mentor. This student may also assist with ordering and organizing shared laboratory research materials and maintaining the spaces and equipment in the Biological Sciences Research Laboratory. Essential Functions Complete relevant biological assays independently. Collect and analyze field samples and/or data relevant to the research project. Work with faculty mentor to design and implement experiments and/or protocols. Discuss and determine the future directions of the research project in consultation with the faculty mentor. Read and discuss research papers with mentor and potentially other students in the research laboratory. Work with faculty mentor to prepare scientific presentations/posters for dissemination of scientific results, as appropriate. Keep a detailed notebook on all lab functions performed Communicate with lab services and biology faculty members to keep lab stocked and to alert regarding waste removal.

We are currently looking for a 1st Shift, Quality Tech, Monday through Friday, to join our VALUES based organization. In this role you will focus on . Responsibilities: * Determine specifications and validate manufactured products and identify quality concerns * Thorough understanding of Work Order tickets & the ability to read and interpret Shop drawings and templates * Identify cause of errors, problems and/or defects * Assist in recommending and developing solutions to address quality concerns and to enhance quality/productivity * Discuss validation results with those responsible for products and recommend corrective actions Qualifications: * 3+ years production line experience in a manufacturing environment; experience as a millwork assembler or master carpenter is a plus. * Ability to follow oral and written communication from supervisor, lead or co-worker * The ability to see details at close range and match or detect differences between colors, including shades of color and brightness. * Must be able to read tape measure Specialty Building Products is the leading distributor of specialty building products in North America. SBP operates under the brands U.S. LUMBER, Alexandria Moulding, REEB Millwork, DW Distribution, Millwork Sales and Amerhart. We serve 45 states in the U.S. and 8 provinces in Canada from over 40 locations. Here at SBP we are a people first organization, our team is built upon strong culture and standards for success. We value your perspective and want to learn more about you with a commitment to laying the foundation for you to build a successful career with us. Join us and EVOLVE your Future at Specialty Building Products! Being a part of SBP you will be eligible for many benefits. Full-Time benefits would include: * Medical, Dental, Vision given on the 1st of the month following 30 days of employment * Company-Paid Life Insurance & Disability * 401(k) with Company Match * Company-Paid Time Off * Paid Holidays & Floating Holidays * Plus many more perks! Serving our communities, we are also committed to our core value of "using our influence to have a uniquely positive impact" on the people that we touch. Through our initiatives we encourage and incentivize our employees to aid fellow employees in need and to better serve our communities and the people we directly influence. We are proud to have the best team in our industry. We have experienced a tremendous amount of growth as a company. This growth has served not only our customer base but has also provided significant opportunities for advancement amongst our employees. Specialty Building Products is an equal opportunity employer. It is our policy of Specialty Building Products not to discriminate in hiring and employment on the basis of race, color, religion, national origin, sex, disability, age, military status, genetic information, or other protected class status in accordance with all applicable federal, state, and local laws.

Job Description Quality Technician ???? Work Hours: 8:00 AM to 4:30 PM, Monday through Friday ???? Pay Range: $19 - $24 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is looking for a Quality Technician to join their Boss Division in Chestertown, MD! In this role, you will be responsible for in-process audits in production, inspecting and approving incoming materials, and managing calibration of gauges. This position is ideal for someone who takes pride in precision and has a strong background in inspection, measurement, and metrology. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. ???? What You'll Do: Inspect and approve incoming materials, in-process production, and finished goods against engineering drawings and specifications. Perform visual and dimensional inspections using height gages, calipers, micrometers, optical comparators, and other precision measurement tools. Document inspection results through reports, logs, and database entries, including rework and scrap tracking. Communicate nonconformances to affected parties and follow up for required adjustments. Issue Corrective Actions where appropriate based on internal guidelines. Maintain and manage all production gauges; performing in-house calibration where possible and coordinating third-party calibration when necessary. Verify proper operation of gauges; manage inspection and repair as required. Ensure compliance with company quality standards, safety practices, and regulatory requirements. Maintain SOPs for the Quality department, making revisions and updates as needed. Assist with auditing internal work procedures and making recommendations to address non-conformances. Participate in continuous improvement efforts to enhance quality systems and reduce rework. ???? What We're Looking For: High school diploma or equivalent required; Associate degree in STEM or related coursework preferred. 1-3 years of experience in a quality, inspection, engineering or manufacturing role is preferred. Some experience in reading blueprints and using measurement tools is required. Strong working knowledge of mechanical measurement equipment such as calipers, micrometers, height gauges and thread gauges. Familiarity with engineering drawings, blueprints, and industry specifications such as ANSI, ASTM, API and 3A. Familiarity with quality documentation, reporting, and data entry. Detail-oriented, with strong organizational and communication skills. ???? What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Work Hours: 8:00 AM to 4:30 PM, Monday through Friday Pay Range: $19 - $24 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is looking for a Quality Technician to join their Boss Division in Chestertown, MD! In this role, you will be responsible for in-process audits in production, inspecting and approving incoming materials, and managing calibration of gauges. This position is ideal for someone who takes pride in precision and has a strong background in inspection, measurement, and metrology. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: * Inspect and approve incoming materials, in-process production, and finished goods against engineering drawings and specifications. * Perform visual and dimensional inspections using height gages, calipers, micrometers, optical comparators, and other precision measurement tools. * Document inspection results through reports, logs, and database entries, including rework and scrap tracking. * Communicate nonconformances to affected parties and follow up for required adjustments. * Issue Corrective Actions where appropriate based on internal guidelines. * Maintain and manage all production gauges; performing in-house calibration where possible and coordinating third-party calibration when necessary. * Verify proper operation of gauges; manage inspection and repair as required. * Ensure compliance with company quality standards, safety practices, and regulatory requirements. * Maintain SOPs for the Quality department, making revisions and updates as needed. * Assist with auditing internal work procedures and making recommendations to address non-conformances. * Participate in continuous improvement efforts to enhance quality systems and reduce rework. What We're Looking For: * High school diploma or equivalent required; Associate degree in STEM or related coursework preferred. * 1-3 years of experience in a quality, inspection, engineering or manufacturing role is preferred. * Some experience in reading blueprints and using measurement tools is required. * Strong working knowledge of mechanical measurement equipment such as calipers, micrometers, height gauges and thread gauges. * Familiarity with engineering drawings, blueprints, and industry specifications such as ANSI, ASTM, API and 3A. * Familiarity with quality documentation, reporting, and data entry. * Detail-oriented, with strong organizational and communication skills. What We Offer: * Medical, dental, and vision insurance for you and your family * Competitive salary * Bonus programs * 401K retirement plan * Training opportunities * Tuition reimbursement * Paid vacation, PTO, and holidays * Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job Title: Quality TechnicianLocation: Laurel MDJob Type: 3-6 month contract Industry: [Manufacturing/Electronics/Defense] Job Summary:We are seeking a detail-oriented and experienced Quality Technician to join our team. The ideal candidate will possess an IPC-A-610 or IPC/WHMA-A-620 certification and will have hands-on experience inspecting electronic assemblies to industry standards. Experience operating and programming CMMs using PC-DMIS or similar software is highly desirable. Key Responsibilities:Inspect electronic assemblies and cable/wire harnesses in accordance with IPC 610 or IPC 620 standards.Perform visual inspections for soldering, component placement, wiring, and mechanical integrity.Utilize inspection equipment including microscopes, calipers, micrometers, and gauges.Operate and/or program Coordinate Measuring Machines (CMM) using PC-DMIS or similar software (a plus).Maintain accurate inspection records, reports, and quality documentation.Assist in root cause analysis and corrective/preventive action implementation.Collaborate with production, engineering, and quality teams to identify and resolve quality issues.Ensure compliance with company and industry quality standards. Requirements:IPC-A-610 or IPC/WHMA-A-620 Certification (required).2+ years of experience in a quality assurance or inspection role within a manufacturing environment.Experience with electronic assemblies, PCBAs, or cable/wire harnesses.Familiarity with CMM operation and PC-DMIS programming (preferred but not required).Strong attention to detail and documentation accuracy.Ability to interpret technical drawings and inspection criteria.Excellent communication and problem-solving skills. Preferred Qualifications:Experience in ISO 9001, AS9100, or similar regulated environments.Knowledge of statistical process control (SPC) and quality tools (e.g., Pareto, Fishbone).Proficiency with MS Office Suite.